Jonathan Druart [Tue, 28 Apr 2015 09:26:44 +0000 (11:26 +0200)]
Bug 11941: Add link to patron lists from the patron home page
The patron lists are only accessible from the tools module, which is not
easily accessible when you are in the patron module.
Test plan:
Go on the patron home page.
In the toolbar, you should see a link to the patron lists.
NOTE: Tweaked button to a to get the click to work.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 27ef1410a7784577149bed6a466937c7ded6ba70) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14206: Adds test for getletter() call from overdue_notices.pl
Adds missing test for getletter() when called from overdue_notices.pl
Test plan
=========
1/ apply this patch
2/ run prove -v t/db_dependent/Letters.t
all tests should pass, especially test #40 which tests call from
overdue_notices.pl
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c07f83f643e6b8820d90487a23e91e9b062a5cd6) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14206: Adds delete function for non email templates
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8895caa33985bbb0cad9b011c4706d4591d2869b) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Wed, 8 Apr 2015 13:24:50 +0000 (15:24 +0200)]
Bug 13970: Remove category_type related code
Working on bug 13497 and bug 9314, I run into some Koha vestiges.
The category_type parameter should not be passed to memberentry.
On creating a new patron, the categorycode should be passed, and on
editing, it's useless. We can work with the borrowernumber and retrieve
these values.
Details of the changes:
- members-toolbar.inc: Remove the category_type parameter passed to
memberentry.pl
- memberentrygen.tt: Just remove the useless category_type parameter on
editing a patron. Also remove the unused one passed to
guarantor_search.pl.
- tables/members_results.tt: the borrowernumber is enough to edit a
patron.
- memberentry.pl: check_categorytype is never used in the template, all
the process to calculate/retrieve it is unnecessary.
- members/nl-search.tt: The borrowernumber is enough to edit a patron.
Test plan:
Try to create and edit patrons and verify that
- the guarantor search still work
- the form (memberentry) behave as before
Edit a patron from the nl-search.pl script (Magnus?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 9314 (13497 already pushed)
No evident regressions found, add/edit patron works,
search/set guarantor works.
Cant test nl-patron.pl save for exec it.
prove -v t/NorwegianPatronDB.t runs
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c34569480884a543d19f3e87d13153cc771fa135) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Wed, 8 Apr 2015 11:29:28 +0000 (13:29 +0200)]
Bug 9314: Remove useless code related to the type_only parameter
Since the pref AddPatronLists has been removed in bug 13497, the code
related to type_only and category_type in memberentry.pl is useless.
Test plan:
Confirm you don't the information message.
You can also confirm that the message was wrong and nothing was saved.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Dead code removed, no errors
Think that bug description can be updated to commit message
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 9d793b2f7e229251887e96c13c1ad6cb9410de38) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Kyle M Hall [Fri, 5 Jun 2015 12:06:29 +0000 (08:06 -0400)]
Bug 14338: Unable to delete patron images
The call to RmPatronImage is still passing cardnumber as its parameter
instead of borrowernumber.
Test Plan:
1) Upload a patron image
2) Ensure the card number is not the same as the borrower number
3) Attempt to delete patron image
-- Image will remain
4) Apply this patch
5) Attempt to delete patron image
-- Image will be removed
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 721a77e6696c26efedd1955569a00e1dff2aa6b8) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Fri, 22 May 2015 11:11:19 +0000 (13:11 +0200)]
Bug 13265: Use sessionStorage to store searches instead of cookies
This is a counter patch.
The idea is to provide a permanent solution for the cookie length issue
we occurred on storing the searches (intranet side).
Test plan:
Launch as many searches as you can (don't forget to sleep).
You should not get any error.
Confirm there is no regression using the results browser.
Tested with 6 parralel searches in different tabs (with alternatively browising up and down). No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 41b9687d975a3c2a54cc28229d4ba76edf175de9) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha [Tue, 9 Jun 2015 02:02:55 +0000 (02:02 +0000)]
Bug 14360: Unescaped variable causes alert pop-up
To test:
1) Create a list in the OPAC, name it: <script>alert('Hello');</script>
2) Delete the list
3) Confirm deletion
4) See the alert say 'Hello'
5) Apply patch
6) Recreate list with same name
7) Delete list
8) Confirm deletion and alert no longer pops up
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 9bef8f8738492564af7da78cba841366c70ada3c) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha [Mon, 8 Jun 2015 02:30:23 +0000 (02:30 +0000)]
Bug 14360: Unescaped variable causes alert
Adding |html to [% resultsperpage %] to escape the variable and get rid of the alert.
To test:
1) Go to URL such as ... /cgi-bin/koha/opac-authorities-home.pl?op=do_search&resultsperpage=1%22%3E%3Cscript%3Ealert%28document.cookie%29%3C/script%3E
2) Notice pop-up box with alert
3) Apply patch, refresh page
4) Notice alert is gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 9e920f7479df6d36db3e3450d6e6c2524fa9fe56) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Mark Tompsett [Wed, 15 Apr 2015 05:02:08 +0000 (01:02 -0400)]
Bug 10625: Inventory/Stocktaking tool cannot handle windows file uploads
The current code uses
$barcode = <fh>;
logic. This reads until \n, as far as I can tell.
EOL is indicated by \n, \r, and \r\n depending on OS and software.
So, to this end, rather than File::Slurp (which is a potential
memory hog, which is already an issue with no filters), a loop
to pre-read the barcodes was written.
This loop includes:
$barcode =~ s/\r/\n/g;
$barcode =~ s/\n\n/\n/g;
my @data = split(/\n/, $barcode);
push @uploadedbarcodes,@data;
So, that means that lines ending in \n would have it stripped
and pushed into the uploaded barcodes array.
Lines ending in \r would likely be read as one giant block,
have everything converted to single \n's and then using a split,
the set of barcodes are pushed into the uploaded barcodes array.
Lines ending in \r\n would get that stripped and pushed into the
uploaded barcodes array.
It is then the uploaded barcodes array that is looped over for
validating the barcodes.
TEST PLAN
---------
1) Back up your database
2) Download the three sample files (or create your own)
3) Log in to staff client
4) Create a branch with no inventory.
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for your '\r' test file.
7) Limit to just that branch
8) Click 'Submit'
-- Confirm expected errors
9) Repeat steps 5-8 with the '\n' test file.
10) Repeat steps 5-8 with the '\r\n' test file.
-- one of these repetitions should have problems.
11) Apply patch
12) Repeat steps 5-8 for each of the 3 test files.
-- there should be no issues.
13) run koha qa test tools.
Note: This is a tweak based on Jonathan Druart's comment #16
I have reset it to needs sign off again.
Followed test plan. Works as expected. qa OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d75a751d49ad65b007572e02320735d2b02c9e1f) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Thu, 4 Jun 2015 09:35:15 +0000 (11:35 +0200)]
Bug 14256: (follow-up) Check for unique constraint to regenerate random data
There were some issues in the previous patch. This patch fixes the
following:
- rename $value with $original_value
- remove $at_least_one_constraint_failed and $values_ok which make the
code unnecessarily complicated
- the constraints have to be checked only if no original value is passed
- _buildColumnValue created a key to the default value hashref, it broke
the test:
last BUILD_VALUE if exists( $default_value->{$source} );
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c5bc51d7d1b6c98e9d897022f91d8e0806cf4524) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14256: Check for unique constraint to regenerate random data
Unique constraints should be checked when creating random data. Otherwise
we get failures when the generated data already exists on the DB.
This patch takes advantage of ->unique_constraints() to do the job,
looping through all the unique constraints defined for the source.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 395304d3b58d79bb1306c4e6f799548e2d875356) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Thu, 16 Apr 2015 14:39:09 +0000 (16:39 +0200)]
Bug 10355: paramater 'object' lost on the road
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 0002126a2ab0ac38a8d3f144f446dc3ba69dab59) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14344: uninitialized value warning C4/Utils/DataTables/Members.pm
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.
- if $term !~ /^%/
- and $searchtype eq "contain";
+ if (defined $searchtype) && $searchtype eq "contain"
+ && $term !~ /^%/;
To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D
NOTE: Other pages are more forgiving. Tweaked test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d82aeb352f35ec37fdd62fed7e9a713168a21c28) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Marc Véron [Tue, 2 Jun 2015 09:39:17 +0000 (11:39 +0200)]
Bug 14314: System Preferences: Better explanation for syspref 'ShowReviewerPhoto'
[PASSED QA] If syspref ShowReviewerPhoto is enabled, the reviewer's avatar is displayed beside comments in OPAC. The avatar will be searched on www.libravatar.org using the patron's email address.
This patch changes the text for 'ShowReviewerPhoto'.
To test:
Apply patch
Go to Home > Administration > System preferences
Search for ShowReviewerPhoto
Verify that the new explanation makes sense.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Better explanation, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed mail to e-mail. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d763d7cf3c28149b5d7f82de8a98789ee97814d6) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Marcel de Rooy [Thu, 4 Jun 2015 10:47:13 +0000 (12:47 +0200)]
Bug 14330: Remove unused email_sender from sendbasket/sendshelf
The sendbasket/sendshelf scripts and templates do not use email_sender
as a cgi parameter or as a template var. Probably a leftover from previous
changes.
Let's make Koha cleaner :)
Test plan:
[1] Send your cart from opac or staff.
[2] Send a shelf from opac or staff.
[3] Git grep email_sender. No results.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 0114465ced0d87aed51e8632e0ec1c005ae4fce3) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Fri, 24 Apr 2015 15:03:09 +0000 (17:03 +0200)]
Bug 11790: Remove dependency C4::Context from C4::Charset
C4::Context is only used to retrieve a syspref value.
This patch moves the use of C4::Context to a require.
Test plan:
Try to reach the SetMarcUnicodeFlag subroutine (batchmod, add/update a biblio, etc.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on French UNIMARC install
No errors adding/editing biblios
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 34fe5c24167f6bc27cff519d4a26c347d06341b3) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Marcel de Rooy [Thu, 4 Jun 2015 10:03:42 +0000 (12:03 +0200)]
Bug 14329: Useless copy/pasta from Template::Plugin::HtmlToText
The synopsis of this TT plugin contains two example lines:
[% myhtml FILTER html2text(leftmargin => 0, rightmargin => 0) %]
[% myhtmltext | html2text %]
These lines have been copied (without too much thought :) to a few templates. Since we do no use the variables myhtml or myhtmltext in these templates, these lines are useless.
Test plan:
[1] Put some items in your cart. And send it.
[2] Send a shelf.
[3] Git grep on myhtml. Should not have results.
NOTE: Sent carts and lists in Intranet and OPAC successfully.
Though, this does bring into question why the letters
have HTML formatting if it is getting removed. That,
however, is beyond the scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4fd923e12eea70b7e871f0068471ff5ef91dda01) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Marcel de Rooy [Thu, 4 Jun 2015 07:15:24 +0000 (09:15 +0200)]
Bug 14327: Fix js error "TypeError: events is null" in additem.js
If you have no item plugins, the events variable in BindPluginEvents
of additem.js will be null. So testing events.length will generate
the described error.
This patch adds a check to prevent that from happening again.
Test plan:
[1] Do not yet apply this patch !
[2] Temporarily remove framework plugins from your items (in ACQ or default
framework). Probably you have to clear dateaccessioned.pl and
barcode.pl.
[3] Open js console in your browser.
[4] Go to Acquisition. Open a basket and add an order from a new empty
record.
[5] You should see js error: "TypeError: events is null" (additem.js:176)
[6] Apply this patch and reload the page (make sure that you refresh so
that the new javascript code is read).
[7] The TypeError should be gone.
[8] Restore the framework plugins from step 2. Refresh the page again and
verify that they still work as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5132d5f991515b86a9282b214a9418b65b4c0881) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Marcel de Rooy [Tue, 26 May 2015 12:52:07 +0000 (14:52 +0200)]
Bug 14276: Keep highlight on the active item in item editor
The highlight only works on even items.
This patch should resolve it.
Test plan:
Edit biblio with multiple items.
Verify that the highlight is visible on the selected item you edit.
And that there is no highlight for a new item.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 83c6817a86de68fb08cb73aef3b8b46d12587116) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 14173: Paging on 'recent comments' page in OPAC is not displaying correctly
This patch corrects the display of current page on
a multipage recent comments.
To test:
1) Enable OpacShowRecentComments
2) Add multiple comments to multiple records
I used a script to add multiple lines like
"insert into reviews values ($i, 51, $i, 'Comment $i', 1, '2015-06-01 00:00:00')"
to table reviews
3) On OPAC, go to 'Recent comments', verify the bug
4) Apply the patch
5) Reload and check correct display
Can't found missing space near 'by' from description.
Display is correct for me.
Followed test plan, displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 7928cdfbd405de9d4a8fffc535d3dcbd9a95226c) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Josef Moravec [Fri, 15 May 2015 09:03:21 +0000 (11:03 +0200)]
Bug 13656: "Change"/"Set to patron" button for linking a member to an organisation (or child to guarantor) not translatable
Test plan:
1. install and activate an additional language
2. create patron in organization category
3. create professional patron
4. try to add this patron to an organization (Guarantor information section)
5. note that the left button text changed to "Change" - untranslated english string
6. push the "Delete" button, the guarantor patron field is cleared and the left button text changed to "Set to patron" - again original english text
7. apply the patch
7.1. update translation (koha-translate -u language_code)
8. repeat 4-6, note, that button text are still translated in all sitations
9. sign off ;)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors
Fixed message capitalization
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c2650e20f9cc5c9e17eea199d19022a144c6e9c8) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Tue, 3 Feb 2015 12:25:47 +0000 (13:25 +0100)]
Bug 13662: Fix the serials.receive_serials permissions
There are some issues with serial permissions.
For instance it's not possible to receive serials if the
edit_subscription is not set.
Also the toolbar is empty.
Test plan:
1/ Set the serials => receive_serials permissions to a patron (and only
this one for the serials module).
2/ Verify you cannot create a new subscription, you can search
subscriptions but cannot edit them.
3/ On the serial result list, receive a serial (action > Serial
receive).
You can now change the status and receive it.
4/ On the serial collection, you can edit 1+ serials to reveice it.
5/ Set the serials => edit_subscription permission and confirm there is
no regression.
QA note: I think we should introduce a C4::Serials::can_receive_serials
subroutine, to test the IndependentBranches pref, but I don't want to
add to much processing to check permissions.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e6040977409ffe4dc6a23f6d76c3bd1f528837d0) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Fri, 29 May 2015 13:36:34 +0000 (09:36 -0400)]
Bug 14299: Today's checkouts not always sorting correctly
Sometimes the today's checkouts do not sort correctly. This is due to a
simple typo in the comparison line where the bad key 'timstamp' is
compared against the correct key 'timestamp'.
Test Plan:
1) Check out a decent number of items in a row ( 5+ )
2) Hopefully you will see they are sorted incorrectly
3) Apply this patch
4) Reload the page
5) Note they are now sorted correctly
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8e9f89e92b48f1aac786e9b5608338a14603f52f) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Mon, 4 May 2015 16:50:28 +0000 (12:50 -0400)]
Bug 14142 - Holds queue viewer only displays first subtitle from marc keyword mappings
Despite the point of the Keyword to MARC Mappings being to simplify the
handling and display of repeated values from multiple subfields, the
holds queue viewer will only display the first value found. What it
should be doing instead is displaying all fields that match the subtitle
keyword.
Test Plan:
1) Apply this patch
2) Define multiple Keyword to MARC mappings for the subtitle keyword
3) Place a hold on a record using those subtitle fields
4) View the hold in the holds queue viewer
5) Note that all the subtitles now appear
Signed-off-by:Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d76c9f4850c9ba7605f2c405838f973c70a70b61) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This is major problem for plack installations with utf-8 encoding.
In this case, we are overriding CGI->new to setup utf-8 flag and
get correctly decoded $cgi->params, and reset syspref cache using
C4::Context->clear_syspref_cache
Test scenario:
1. under plack try to search with utf-8 charactes
2. try to find patron with utf-8 characters
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3cd086b6b6be08d902a479f302ccf18e55de911b) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Marcel de Rooy [Mon, 25 May 2015 09:32:51 +0000 (11:32 +0200)]
Bug 14267: How active is active?
git grep on function active in additem.tt:
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/additem.tt:function active(n
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:active([%
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:function a
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serial-issues-full.tt:
t/Cache.t: unless ( $cache->is_cache_active() && defined $cache );
t/Cache.t: unless ( $cache->is_cache_active() );
Conclusion: active in additem seems to be quite inactive.
Test plan:
Add, edit or delete items and verify that you did not miss active :)
NOTE: The active function has a loop which is always run.
Inside that loop 'ong' would always be defined as some number
concatenated with XX.
Both sides of the if/else reference document.getElementById(ong),
but there is only one occurence of XX in the file: the concatenation!
Similarly, the 'link' logic does not correspond to any of the
id= or name= strings in the file.
koha-tmpl/intranet-tmpl/prog/en/modules/admin/marc_subfields_structure.tt
is the only file with "id=\"link" that matches the logic.
This is likely a cut-and-paste remnant made useless by datatable upgrades
and HTML/CSS class changes.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f327ebe540103905ccc4d36dcc5275b1b5644be5) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Katrin Fischer [Mon, 25 May 2015 10:13:08 +0000 (12:13 +0200)]
Bug 14269: OPAC: Some template improvements for the full serial history page
- Fix filter labels:
Library : -> Library:
Subscription : -> Subscription:
- Make '(All)' entry in filter pull downs translatable
- Show branch name instead of branchcode in table and filter
To test:
- Verify changes as described above
- Verify filters still work as expected
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 5bbea3ea2ca08e7d1b785cdfb90524bb29f553ac) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Marc Véron [Tue, 2 Jun 2015 07:54:15 +0000 (09:54 +0200)]
Bug 14313: OPAC - Adding a comment makes result browser disappear
To reproduce:
- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser
Result: The next biblio is displayed, but result browser has disappeared.
To test:
- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear
AMended to remove whitespace chars. / MV
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 22c5c4b468b3584ed8bf45039c1494e969f2d66b) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Sun, 24 May 2015 16:00:57 +0000 (18:00 +0200)]
Bug 14263: Fix export of item search results when translated
This csv does not use the correct way to display headers.
They should be put in a separate file to get a correct display.
Without this patch, the first line of the generated file contains the
headers + data
Test plan:
1/ choose a language and update + translate the templates
for instance:
cd misc/translate;
./translate update es-ES; ./translate install es-ES
2/ Go to the item search form using this language
3/ Launch a search and select CSV to display the results.
The CSV headers should be correct
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Seen the bug. Works as described.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit ece2b02a57fdb692c02f00540df436af1f5ba971) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Tue, 28 Apr 2015 10:52:36 +0000 (12:52 +0200)]
Bug 12320: Remove deprecated construct to delete cookie showColumns
$.cookie('foo', null);
is deprecated and should be replaced with
$.removeCookie('foo');
This patch replaces the occurrences for the "showColumns" cookie.
Before this patch, there was a bug on the batchmod tools.
To reproduce the issue:
1/ Go on the Batch item modification tool
2/ Fill the textarea with barcodes and submit
3/ Click on some column names (to create the cookie)
4/ Click on 'Show all columns" (to set the cookie to null)
5/ Don't submit and repeat steps 1 & 2
6/ You should see a js error:
Error: Syntax error, unrecognized expression: :nth-child
...break;q=a}return s},m.error=function(a){throw new Error("Syntax error, unrecogni...
Test plan:
Confirm the issue has gone away and there is no regression on the column
selection
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No js error, no regressions, no errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 0fa0297d7da7af6a9f4cd82b34ac86018391289f) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Tue, 28 Apr 2015 10:52:00 +0000 (12:52 +0200)]
Bug 12320: Remove deprecated construct to delete cookie holdfor
$.cookie('foo', null);
is deprecated and should be replaced with
$.removeCookie('foo');
This patch replaces the occurrences for the "holdfor" cookie.
Test plan:
1/ Search for a patron
2/ On the patron detail page, click on "search to hold"
3/ Search for records
4/ On the results page, click on "Place hold" > "Forget PATRON"
5/ Reload the page.
6/ The "Place hold" button should not contain the patron anymore
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 04f5e7d4e7db833c18afe27a4dc4fd5b66b41099) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Wed, 29 Apr 2015 10:59:23 +0000 (12:59 +0200)]
Bug 5010: Fix - replace tab with spaces
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors.
Tested what I can, not plack/shibboleth/cas
Perhaps this can pass and we can fix any problem later (for 3.22)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3b4c4a486133882d435369c264dc7b74b5e769f6) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mark Tompsett [Wed, 11 Feb 2015 15:26:13 +0000 (15:26 +0000)]
Bug 5010: Fix OPACBaseURL to include protocol
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 1651cf70d10101739e3a7ff943fb709cedf6dccf) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mark Tompsett [Wed, 3 Jun 2015 19:25:47 +0000 (15:25 -0400)]
Bug 14325: Test calls C4::Context::set_userenv
This is a case of works by accident. This patch corrects the
set_userenv call.
TEST PLAN
---------
1) prove t/db_dependent/Borrower_Discharge.t
-- works
2) git grep :set_userenv
-- only this one file.
3) Confirm the the C4/Context.pm has a set_userenv
which shifts the first parameter, as intended for
a -> call and not a :: call.
4) apply patch
5) prove t/db_dependent/Borrower_Discharge.t
-- still works
6) git grep :set_userenv
-- nothing now.
7) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8f12796633e71b9c1e8442cdeba2f7333e71ca52) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch renames translation files for Bengali
language, from ben-* to bn-IN-*.
Also adds India as region
To test:
1) Apply the patch
2) Run updatedatabase
3) Install Bengali language
cd misc/translator
perl translate install bn-IN
enable
Check correct description
4) Create and install a fake Bengali variant
cd misc/translator
perl translate create bn-XX
perl translate install bn-XX
enable both variants
Check correct rendering of region
Results comply with expected test plan outcome. Signed off for bn-IN Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e365e6e53592a4639f18173def7e74e0ad24419c) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Nicole C. Engard [Thu, 28 May 2015 16:39:29 +0000 (11:39 -0500)]
Bug 14291: Fix OpacExportOptions text
This patch removes the instruction to separate values by | in the
OpacExportOptions preference.
To test:
Go to system preferences
Find OpacExportOptions
Confirm text is right
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Test output compliant with expected test plan outcome.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed "List" to "Select" and removed a space before the : at the end. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 959e6b7ae433d891a31c20b86690ab68446bf508) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 14047: Order z39.50 biblioservers in cataloguing
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 14047: Sort z39.50 servers in Acquisition
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 14047: [QA Follow-up] Move result_class back into attributes
No need to put this into a separate call.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note that we strictly speaking do not need the hashref inflator here,
because TT understands hash.column as well as object.property.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c7a67ea4f33402a1f3165864952d6a692f898953) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
If an error occurs in patron batch modification, a message similar to the following is displayed:
Can not update patron with borrowernumber 7055
It would be useful to have the cardnumber as well.
This patch adds the card number to the lists of errors.
It is not easy to trigger an error (see comments).
For testing, I tweaked the sub ModMember in C4/Members.pm to always return false.
TEST PLAN
---------
1) Log in as a superlibrarian and create a test user
2) Change the cardnumber to a number differing from the
borrower number.
3) Home -> Tools -> Batch patron modification
4) Type in the cardnumber of that test user
5) Check the Library checkbox.
6) Click Save
-- nice error, but it is borrower number instead of
the card number which was entered.
7) Apply the patch
8) Repeat steps 3-6
-- nice error, but it is now more informative.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3b3f82de377c87f9108bf07dd0d293182e5b9bdc) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 14279: Remove CGI::scrolling_list from issues_avg_stats.pl
This patch removes scrolling_lists from this file
To test
1) Go to Reports > Average loan time
2) Check dropdowns Patron category, Item type, Sort1/2 and Into application
will be changed
3) Apply the patch
4) Reload and check for regression
Followed test plan. Works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 154eb5f6f55c60632811bcae240cc8254fab7efb) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
David Cook [Mon, 25 May 2015 04:01:09 +0000 (14:01 +1000)]
Bug 14265 - Use $.trim instead of trim() in admin/categorie.tt
This patch replaces trim() with $.trim() in admin/categorie.tt, as
$.trim() is more cross-platform (ie it is supported in "< IE9").
_TEST PLAN_
Before applying patch:
0) Use IE 8 or use Document Mode 8 in a newer IE using F12 Developer Tools
1) Go to Administration > Patron categories
2) Click "Edit" next to a category
3) Click "Save" at the bottom
4) Note the form doesn't submit (you can also notice the error in the
console log)
Apply the patch:
5) Hold down shift + refresh the page
6) Click "Save" at the bottom"
7) Note that the form does submit and there are no errors reported
Signed-off-by: Indranil Das Gupta <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
No regression found using iceweasel.
I did not know the staff interface was IE compatible. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 06ef68046e52a56f690e656f30592ff46b21a383)
Jonathan Druart [Tue, 26 May 2015 11:05:51 +0000 (13:05 +0200)]
Bug 14266: Trim the email address in the pl script
The original concern of bug 14266 was to provide a compatibility for
<IE9.
But actually we don't need to trim the email address template side.
It will even better to trim it in the perl script, so that the email
will be trimed even if JS is disabled.
Test plan:
1/ Share a list and does not provide any email address
2/ Submit
=> The form is not submited, no alert/message is displayed (same as
before this patch).
3/ Share a list and provide an email address with spaces before and
after
4/ Submit
=> You should receive the email
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Test output compliant with expected test plan outcome.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit c7a8e4dd25768870de74a5a96c63a92ff1c7fcc8) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
David Cook [Mon, 25 May 2015 04:07:27 +0000 (14:07 +1000)]
Bug 14266: Replace trim() with $.trim() in opac-shareshelf.tt
This patch replaces trim() with $.trim() which is supported
in versions of IE older than IE9.
Revised test plan
=================
Before applying patch:
0) Use IE 8 or Document Mode 8 in a newer IE using F12 Developer Tools
1) Set OpacAllowSharingPrivateLists to "Allow" in Global System Preferences
2) Create a private list in the OPAC
3) Add a record to the private list
4) Click "Share" or "Share list" on one of the list screens
5) Type in an email address and click "Send"
6) Note the error in the console log
7) The page should submit
Apply the patch:
7) Hold shift + refresh the browser to update any Javascript cache
8) Try to "Share" the list again
9) Note that the form submit after clicking "Send" and
that there are no errors in the console log
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Remarks: Works as per revised test plan Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e1ac8b431002ad15ba8bc19a61f2daf0424552e2) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Wed, 20 May 2015 15:31:18 +0000 (11:31 -0400)]
Bug 12066: New renew page in staff client doesn't record branch in statistics
Test Plan:
1) Apply this patch
2) Renew an item via circ/renew.pl
3) Note the branch code of your logged in library is set as the
branch in the generated statistic line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested pre and post patch, now branch is saved
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d78f832cb026ace04ff3e6d2c3765b39656e0e11) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Katrin Fischer [Mon, 25 May 2015 09:22:07 +0000 (11:22 +0200)]
Bug 13946: Change order status 'Pending' to 'Ordered'
The order status after closing the basket is 'ordered' in the
database, but displays as 'pending' in the staff interface.
As we use 'pending' when you have to review a suggestion, this
clashes in translations and the meaning is different. The patch
renames 'pending' for the order status to 'Ordered' to be more
clear.
To test:
- Verfiy 'Ordered' shows in the pull down on the acq advanced
search and search still works correctly
- Verify the results table also display 'Ordered' as the status
Signed-off-by: Cédric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 480ac8667971a638b4b27d0dc8e5bb29f9f2a372) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 14275: Remove CGI::scrolling_list from guided_reports.pl
Remove an instance of CGI::scrolling_list from this file
To test:
1) Go to Reports, Guided report wizard, New SQL report
2) Create a report with some auth value list, e.g.
SELECT surname,firstname FROM borrowers WHERE branchcode=<<Enter patrons library|branches>>
Save
3) Clic on 'Run this report", look at the dropdown, that will be changed
4) Apply the patch
5) Reload, check dropdown and any regression
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 764b425c1ce0573f9b02bfa3b9b2425137630f0c) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mark Tompsett [Fri, 22 May 2015 13:02:23 +0000 (09:02 -0400)]
Bug 14112: Silence warnings in t/Charset.t
After Jonathan said this was the wrong way to correct the issue,
www.utf8-chartable.de made it clear to me that the \c3\a9 were
missing x's.
TEST PLAN
---------
1) prove t/Charset.t
-- noise
2) apply patch
3) prove t/Charset.t
-- no noise
4) koha qa test tools
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4d4582566ee7d2014f30f15db4889d4cad956316) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Marcel de Rooy [Sat, 23 May 2015 12:01:57 +0000 (14:01 +0200)]
Bug 12176: Fix for missing field_value in select
As Jonathan Druart discovered, we were still missing an important attribute
in the selects. Var mv.name was not filled, so the name was empty with nice
side-effects :)
While fixing this, it was also possible to delete some unused vars that Bernardo
already mentioned before: $attributes and $attributes_no_value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
For me the simptom was different, when saving an edited item
fields were mangled beyond repear :(
No alert for empty mandatory fields.
But this last patch fix the problem.
Tested add/edit items
Cleaner pl file :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e021b512e34d0521803fa5f32dd67f1532ddb73d) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Marcel de Rooy [Wed, 20 May 2015 14:42:34 +0000 (16:42 +0200)]
Bug 12176: [QA Follow-up] Capitalization typo after eleventh hour
While cleaning up, still found this super tiny string typo :)
Yes, Tag Editor should now be Tag editor.
Test plan :)
Git grep on Tag editor and Tag Editor
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 351b2f753f7b30665dc22be595af4a00589424e7) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Marcel de Rooy [Wed, 20 May 2015 12:56:48 +0000 (14:56 +0200)]
Bug 12176: [QA Follow-up] Small additem adjustments
Adjusting a few small things and making qa tools happy:
[1] Remove .hidden after [% avalue %] in additem.tt. (Typo)
[2] A closer look revealed that mv.avalue is useless too. An input element
does not contain any content. Putting it after the hidden element
in a non-visible context has no meaning.
[3] Change handling of select attributes readonly and disabled.
[4] Remove unused variable $attributes_no_value_textarea
[5] Removed a comment with TODO referring to this report.
[6] Moving a duplicated TT variable (mv.javascript) outside IF statement.
[7] And finally could not resist this one: Moving strings Tag editor and
No popup from script to template. Plugins++
NOTE: Most item plugins redirect click to focus. In that case there is
no popup, but unfortunately the text Tag editor comes up.
When you remove or rename function Click, No popup comes up. So it works.
Sorry that this small list kept growing :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 50d2b712883808a36b1d03ac770aed470c8d19d1) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
To test:
1. Check no regressions on Add/Edit/Save items
2. Update translation files for a language,
check new strings "Tag editor" & "No popup" on staff PO file
3. Check it passes xt/tt_valid.t
Patch partially rebased, part rewritten.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 47d2de9c024bfb93d56184f298f334b20685cd86) Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Magnus Enger [Wed, 29 Apr 2015 19:28:50 +0000 (21:28 +0200)]
Bug 14025: Fix 865u-links in the OPAC for NORMARC
The display of links found in 856$u for NORMARC has not been keeping up with
the one for MARC21, and several sysprefs have not been implemented. This
patch tries to fix that.
To test:
- Make sure you have a record with a URL in 856$u and marcflavor = NORMARC.
(It does not have to be a full NORMARC setup or a NORMARC record, just make
sure you are viewing the record through the NORMARC XSLT files.)
- View the record both in a result list and in detail view
- Check that the 4 involved sysprefs affect the display in the expected ways
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on NORMARC setup and XSLTs
Works as described, each syspref works
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Since it only affects NORMAC, I trust in Magnus :) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 9b1241ecfca68c104d9adbb5d05a7547b5761e17) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
A trivial string patch to update the error message displayed to
user if koha-translate is used to attempt removal of a language
that is not installed.
Test plan
=========
1/ attempt to remove a non-existent language by
<installdir>/debian/scripts/koha-translate --remove <langcode>
2/ it should show "Error: the selected language is not already
installed."
3/ apply patch
4/ repeat step 1; it should show "Error: the selected language is
not installed."
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d7dc11e61fea5dcc3f0087e46b6eee8d74c21c63) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha [Tue, 12 May 2015 02:08:17 +0000 (02:08 +0000)]
Bug 14184: Undefined $term causes noisy warns in C4/CourseReserves.pm
This patch sets $term to be an empty string.
Test plan
=========
1/ enable 'UseCourseReserves' syspref in Circulation preferences
2/ in a terminal, run a `tail -f ` on your instance's opac-error.log
3/ go to the opac, click on 'Course reserve' tab to go to
opac-course-reserves.pl
4/ notice the warning - "opac-course-reserves.pl: Use of uninitialized
value $term" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-course-reserves.pl)
7/ page works but the warning in step #4 is no longer logged
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 4f994e8baf3ffd209f6a0a85993039f753ec6e32) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha [Tue, 12 May 2015 03:01:35 +0000 (03:01 +0000)]
Bug 14185: Undefined $limit causes warn in opac/opac-readingrecord.pl
This patch sets $limit to be an empty string.
Test plan
=========
1/ login into the opac using your user account credentials
2/ in a terminal, run a `tail -f ` on your instance's opac-error.log
3/ go back to the opac, click on 'your reading history' tab to go to
opac-readingrecord.pl
4/ notice the warning - "opac-readingrecord.pl: Use of uninitialized
value $limit" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-readingrecord.pl)
7/ page works but the warning in step #4 is no longer logged
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fd14184873e707236150e368f39b19a6992760b8) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14186 [QA Followup]: Undefined $reservedfor causes warn in opac-reserve.pl
This is a followup for Bug 14186 that removes the extraneous tab
char on line 470, so that the patch can clear QA tools.
This patch sets $reservedfor to an empty string.
Test plan
=========
1/ in a terminal, run `tail -f ` on your instance's opac-error.log
2/ go to the opac and search from an item that exists on the Koha
instance.
3/ Select the title (if more than one title is returned) and click on
'Place hold' link to go to opac-reserve.pl
4/ notice the warning - "opac-reserve.pl: Use of uninitialized value
$reservedfor" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-reserve.pl)
7/ page works but the warning in step #4 is no longer thrown up
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: Testing result match expected test plan output. The QA tests
pass with "OK" for the commit.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 642e6012cd125cbc3aeaca83e1fd2430ce43fdb0) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aleisha [Tue, 12 May 2015 03:30:46 +0000 (03:30 +0000)]
Bug 14186: Undefined $reservedfor causes warn in opac-reserve.pl
This patch sets $reservedfor to an empty string.
Test plan
=========
1/ in a terminal, run `tail -f ` on your instance's opac-error.log
2/ go to the opac and search from an item that exists on the Koha
instance.
3/ Select the title (if more than one title is returned) and click on
'Place hold' link to go to opac-reserve.pl
4/ notice the warning - "opac-reserve.pl: Use of uninitialized value
$reservedfor" appear in the `tail`ed opac-error.log
5/ apply the patch
6/ reload the page (opac-reserve.pl)
7/ page works but the warning in step #4 is no longer thrown up
8/ run qa test (i.e. koha-qa.pl -c 1 -v 2), there should be no error
Remarks: The QA test failed - "forbidden pattern: tab char (line 470)".
Marking this as 'FAILED QA'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 8fdd352bc9bb4d0dd84ca0df33b51558ee765ea1) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Katrin Fischer [Mon, 4 May 2015 20:08:04 +0000 (22:08 +0200)]
Bug 14130: Update columns.def
- Updates columns.def with new columns in items
- Adds some descriptions
- Corrects some existing column descrpitions
To test:
- Read the patch to see what has been changed
- Run the guided report builder for the 'circulation'
module
- Observe changes show up
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Changes show up, no errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cc4aaf891bdda0d94157c32a99c2a2acace41498) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5d5802dd70a88fa42dc065bcfc4c0cc58377fff6) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 14106: (QA followup) avoid failures if no instances created
If there are no instances already created on install/upgrade, the
koha-common.postinst script hungs in the absence of files to fix
and keeps waiting for user input.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Robin Sheat [Fri, 22 May 2015 01:48:13 +0000 (13:48 +1200)]
Bug 14106: patch existing zebra configs with new modulePath
This patches the zebra configuration of existing Koha installations so
that their modulePath will work on newer Debian (and presumably Ubuntu)
releases.
Testing:
* Install a package built with this patch onto a system with instances
created by an older Koha version.
* Check that the files in /etc/koha/sites/*/zebra-*.cfg have the new
modulePath: directive rather than the old one.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Sat, 9 May 2015 05:31:37 +0000 (01:31 -0400)]
Bug 14145: Noisy warns in admin/preferences.pl
The problem with the odd number of hashes happens when not everything is selected.
The grep returns undef, because it isn't found in @values.
By turning the grep into a ternary-operator truth value, we can set a value (1 or 0) expressly.
The next problem is when nothing is selected in these multiple lists, $value is
undefined, so you can't split it. By splitting the definition of @values from
the actual splitting, we can split only if $value is defined, thus eliminating the
warning message.
TEST PLAN
---------
1) back up your koha error log file
2) blank your koha error log file
3) log in to the staff client
4) Home -> Koha administration -> Global system preferences
5) Click on every tab, EXCEPT local use.
6) notice the koha error log file has warnings.
7) blank the koha error log file again
8) apply this patch
9) Click on every tab, EXCEPT local use, again.
10) notice the koha error log file has no warnings.
11) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
I like more this version
Works as described
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
To reproduce: go on the OPAC tab, OpacAdvSearchMoreOptions or
OpacAdvSearchOptions should not have all options selected. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14254 - Unclosed <option> element in unimarc_field_116.tt
Unclosed <option>
To test:
1) Unimarc install
2) Edit a record
3) Edit 116 field, 10 position, Technique (prints) 3
4) Select litography, save
5) Run plugin again, will see litography/option>
6) Apply the patch
7) Check again, now is right (clean cache)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
After cleaning 'prove t' up. 'prove -r t' was attempted next.
A couple uninitialized variable warning were triggered.
TEST PLAN
----------
1) prove t/DataTables/Members.t
-- warnings.
2) apply patch
3) prove t/DataTables/Members.t
-- no warnings.
4) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Cleaned. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 1 May 2015 21:09:58 +0000 (17:09 -0400)]
Bug 14114: Silence warns and cleanup t/Debug.t
TEST PLAN
---------
1) $ prove t/Debug.t
-- What's with this BEFORE and AFTER stuff?!
2) apply patch
3) $ prove t/Debug.t
-- cleaner, and you only get fuller output with -v.
4) koha qa test tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Cleaner, no koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13486: Apache version empty in about page if Apache 2.4
This patch makes about.pl query the running Apache version using
the apache2ctl command. I tested it on Apache 2.2 and is backwards
compatible (it is present in both).
To test:
( On an Apache 2.4 setup )
- Go to the about page
=> FAIL: "Apache version:" is empty
- Apply the patch
- Reload the page
=> SUCCESS: "Apache version:" shows the correct version.
- Sign off :-D
If you have an Apache 2.2 setup to try it, verify that there are no regressions
(trivial because you can run apache2ctl manually and verify the first result is the expecte).
Regards
PS. I even changed the order in which Apache version is tested because
most people is using Debian/Ubuntu and it was the last option.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with apache 2.2/2.4, no errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Only tested with 2.4 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Winona Salesky [Thu, 29 Jan 2015 20:13:37 +0000 (14:13 -0600)]
Bug 13650: Remove parens from links to fix searches
This patch will resolve the issue of not being able to
search with parens in a subject heading by editing the xslt
To test:
* Apply patch
* Search Koha for a title with ( ) in the subject
* Click the subject
* Results should be returned
* Repeat in OPAC and Staff client
Signed-off-by: Nick <Nick@quechelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Thu, 14 May 2015 15:28:29 +0000 (17:28 +0200)]
Bug 14072: Update German web installer for 3.20
- translates new notice ACQ_NOTIF_ON_RECEIV
- translates new permissions
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested German install till "Gratulation, die Installation ist abgeschlossen"
No errors
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Same results noted as above.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested installation, checked new translations in Koha and deleted an extra
space in the ACQ_NOTIF_ON_RECEIV notice
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 28 Apr 2015 09:45:46 +0000 (11:45 +0200)]
Bug 11925: Check ages limits when creating/updating patrons
The check on the ages limits is only done when the dateofbirth field is
mandatory, which does not make any sense.
This check should be done when the field is filled.
Test plan:
1/ Remove the dateofbirth field from the BorrowerMandatoryField pref
2/ Create a patron category for teenager (say between 12-17y)
3/ Try to create a patron in this category outside the range of the ages
limits.
You should not be able to do it.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 13 May 2015 14:39:59 +0000 (16:39 +0200)]
Bug 14195: TestBuilder - A random string should not be longer than the DB field
t::lib::TestBuilder::_gen_text does not use correctly the regex and the
max parameter to generate the random string (String::Random).
This can cause future tests to fail.
http://bugs.koha-community.org/show_bug.cgi?id=14195 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Script tested, problem occurs, patch fixes it.
Bad number on commit subject
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Tue, 10 Feb 2015 10:34:01 +0000 (11:34 +0100)]
Bug 13687: Move hold policy check into CanItemBeReserved
This way ILS-DI HoldItem and HoldTitle services also benefit from this
check
Test plan:
1/ Define some default holds policies by item type in
/admin/smart-rules.pl
2/ Use ILS-DI HoldItem service and check that those rules are respected
3/ Check that staff and opac hold behaviour is unchanged regarding
these rules.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. No regressions found,
improves the ILS-DI HoldItem response. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 16 Apr 2015 13:52:33 +0000 (15:52 +0200)]
Bug 10299: authority plugin - authority field are reversed
If you click the plugin next to an authority field that is already
populated it takes the values from the field and puts them in the search
in the reverse order.
Test plan:
1/ Edit a biblio
2/ Fill the subfield for an authority field (for instance 650$v, 650$x,
650$y, etc.)
3/ Click on the authority plugin
Before this patch, the values were concatenated in the reverse order.
With this patch, it should not.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 14 Jan 2015 09:55:19 +0000 (10:55 +0100)]
Bug 5338: Add "Serials" to the report group list
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 5 Apr 2012 13:44:32 +0000 (15:44 +0200)]
Bug 5338: Serials Report
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 14 Apr 2015 10:05:45 +0000 (12:05 +0200)]
Bug 7380: Rename filter to avoid confusion
The branchcode and categorycode parameter names are too common and are
confusing.
To remove the ambiguity, this patch renames them with branchcode_filter
and categorycode_filter.
Test plan:
1/ Go on the patron home page (members-home.pl)
2/ Fill the library and category dropdown list in the header search
3/ The patron result list appears and the filters (on the right) are
correctly set with what you have selected.
Make sure the ones in the header are also correctly selected.
4/ Click on a patron
5/ On the patron detail page (moremember.pl), the dropdown lists in the
header are not preselected.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 15 Jul 2014 10:44:23 +0000 (12:44 +0200)]
Bug 7380: Refactor the patron search box header
A lot of page uses the patron search box header include (git grep
patron-search.inc for the list) and the branch and category lists are
not generated for all of them.
For instance, on a patron detail page, there is a [+] link, but nothing
append on clicking on it.
This patch add a new template plugin "Categories" to get all patron
categories from the templates.
Test plan:
1/ Verify the [+] is working on all patron page (if that works for 2,
that should work for all).
2/ Launch a search from the header box and verify the library and
category dropdown lists select the correct value.
3/ Launch a search on the patron search page (patron home) and verify
the search is working correctly on selecting a category and/or a library
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 14 May 2015 10:20:00 +0000 (06:20 -0400)]
Bug 14200: GetNormalizedISBN failing to normalize valid ISBNs in some cases
For some reason the regular expression used to split the multiple ISBN
fields can fail which keeps Business::ISBN from being able to parse out
and return a valid isbn. Using split() instead of the regex fixes the
issue.
Test Plan:
1) Apply the unit test patch first
2) prove t/Koha.t
3) Note the failures
4) Apply the second patch
5) prove t/Koha.t
6) Note all tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Karen Bryant <kbryant@ccpl-fl.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 14 May 2015 10:19:39 +0000 (06:19 -0400)]
Bug 14200: Regression tests
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Karen Bryant <kbryant@ccpl-fl.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 24 Dec 2014 12:09:27 +0000 (13:09 +0100)]
Bug 11607: Don't display all items in a single line
If the *DGST notices are sent in HTML, the items are displayed in a
single line.
To reproduce:
1/ Define a *DGST notice using the <<items.content>> pattern.
2/ Checkout at least 2 items to a patron and set the due date as today.
3/ Launch the advance_notices.pl and process_message_queue.pl cronjobs.
4/ Verify the email you will receive separates the items with a line
break.
Verify you don't find a regression for non-html letters.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: the display in the notices tab is misleading here,
needs to be verified checking the sent emails or database
entries in message_queue. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 11:45:44 +0000 (13:45 +0200)]
Bug 10947: Fix editing the default authority type
The default authority type cannot be defined.
The authtypecode is en empty string and the tests should be done on
"defined", not "exist".
Test plan:
Edit the default authority type, save it.
Note: There is no way to create an authority with an empty string, with
you deleted you won't be able to recreate it.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 10 Apr 2015 11:51:31 +0000 (13:51 +0200)]
Bug 10011: Save branch limitations on creating a new patron category
The code was just badly placed.
It should be executed on update but also on insert.
Test plan:
1/ Create a new patron category and select 1+ branch limitations
2/ Confirm it's correctly saved
3/ Edit it and change the branch limitations
4/ Confirm it's correctly saved
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Not a C4 or Koha library, so tests not required. Though,
this code could be cleaned up and have the DB stuff put
into some sort of library with tests to prevent regression.
However, that dream is beyond the scope of this bug.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 18 May 2015 08:31:26 +0000 (10:31 +0200)]
Bug 14213: Cataloging plugin in cloned field does not work
A code change for report 10480 in cataloging.js does not work well in case
you clone a field with a plugin on a subfield.
The events (click, focus, etc.) do not work on the subfield of the clone.
This patch corrects the situation by finding the right html element for
adding event binding.
NOTE: The test plan uses EXAMPLE.pl since many old plugins do not operate
on the correct field value when cloning. This is corrected in bug 13437.
Test plan:
[1] Attach EXAMPLE.pl to field 007, 246h and 260c.
In sql for 007: update marc_subfield_structure set
value_builder='EXAMPLE.pl' where tagfield='007' and tagsubfield='@';
[2] Clone field 007. Verify that focus and click operate on both fields.
Check also that the plugin works on the value corresponding with
the button you clicked.
[3] Clone field 246. Do the same checks on both subfields $h.
[4] Clone subfield 260c. Do the same checks again.
Test Remarks:
============
1/ Setup a new framework (B213) based off 'Default' and fired off
an SQL statement to update value_builder values for 007, 246$h
and 269$c (UPDATE `marc_subfield_structure` SET value_builder
= 'EXAMPLE.pl' WHERE frameworkcode = 'B213' AND ( (tagfield =
'007' AND tagsubfield = '@') OR ( tagfield LIKE '246' AND
tagsubfield = 'h') OR (tagfield = '260' AND tagsubfield = 'c'))
2/ Tested step 2, 3 and 4 of the given test plan above. The missing
plugin support in the cloned fields were noted.
3/ Applied patch
4/ Re-tested steps 2, 3 and 4 as before. The defined plugins were
correctly cloned and found to be functional.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log