Nick Clemens [Wed, 10 Feb 2016 00:54:26 +0000 (00:54 +0000)]
Bug 14753 - Use columns configuration for checkins table
This patch adds the ability to configrue the visible columns on the
check in screen.
To test with both patches:
1 - Check in an item
2 - Note there is no 'Date acquired' column
3 - Apply patches
4 - Note there is still no 'Date acquired' column
5 - Note that there is now a "Show / hide columns" button
6 - Verify that you can check the box and view the 'Date acquired'
column
7 - Verify that showing/hiding columns works (it will not carry over
between items due to page reload)
8 - Verify that changes from the 'Configure columns' section of
Administration hold between checkins
Sponsored by: North Central Regional Library (ncrl.org)
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Koha::IsAuthorisedValueCategory contains only 2 useful calls, from
C4::Reports::Guided and reports/guided_reports.pl
It can be replaced with
Koha::AuthorisedValues->search({ category => $authorised_value})->count
Test plan:
1/ Create a sql report using an authorised value category, something
like:
SELECT COUNT(*) FROM items where itemlost=<<lost|LOST>>
2/ Execute the report and confirm that everything works fine.
3/ Create a sql report using a nonexistent authorised value categor,
something like:
SELECT COUNT(*) FROM items where itemlost=<<lost|NONEXIST>>
4/ When saving the report, you should get a warning message
"lost: The authorized value category (NONEXIST) you selected does not exist."
5/ Save anyway and execute the report, you should get the same warning
message.
QA:
git grep IsAuthorisedValueCategory
should not return any results
prove t/db_dependent/ReportsGuided.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Mon, 15 Feb 2016 22:14:43 +0000 (22:14 +0000)]
Bug 15821: Use Font Awesome icons in confirmation dialogs - Circulation
To test, apply the patch and test deletion in the following cases. Test
both confirmation and cancel actions.
Circulation -> Check out
-> An item that is checked out by someone else
-> An item that is on hold to someone else
-> To a patron that has more than noisuescharge in fines (Allow
AllowFineOverride syspref)
-> To a patron that has reached the max amount of checkouts (Allow
AllowTooManyOverride syspref)
-> To a patron that has more than noissuescharge in fines (Allow
AllowFineOverride syspref and set noissuescharge syspref)
-> Renew -> An item that is on hold to someone else
-> To a patron that is at max renewals (Allow AllowRenewalLimitOverride syspref)
-> An item that is not checked out by anyone
-> Check in -> An item that is in transit to another branch
And look for other confirmation dialogs and check if I've missed any
Sponsored-by: Catalyst IT
EDIT: Made changes from Comment 2 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Wed, 24 Feb 2016 17:18:01 +0000 (12:18 -0500)]
Bug 15910 - Move header search keep text JavaScript into staff-global.js
Bug 14189 added some global JavaScript to a new include file which is
included in doc-head-close.inc. Since it's included globally, there is
no reason not to move it to staff-global.js. This patch does so.
To test, apply the patch and clear your browser cache if necessary.
- Navigate to any page in the staff client which has multiple header
search tabs.
- Type something in one of the tabs.
- Switch tabs. Verify that your text was copied to the newly-displayed
form field.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Tue, 26 Jan 2016 16:42:44 +0000 (16:42 +0000)]
Bug 15675 - Add issue_id column to accountlines and use it for updating fines
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Marc Véron [Tue, 2 Feb 2016 10:34:16 +0000 (11:34 +0100)]
Bug 15721: About page does not display Apache version
This patch changes about.pl to get version information from
C4::Context where applicable and fixes missing display of
the Apache version e.g. for Apache/2.2.22
To test:
- Without patch, open about page in staff client
- Remember contents of tab 'Server information'
(e.g. make a screenshot)
- Apply patch
- Verify, that the About page displays the same information
as before rsp. additionally displays Apache version if
it was missing without patch.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 11 Feb 2016 17:23:49 +0000 (12:23 -0500)]
Bug 15804: [Revised] Use standard dialog style for confirmation of MARC subfield deletion
When deleting a MARC framework subfield, the confirmation message is not
styled. This patch modifies the template to style the confirmation
message like similar ones.
Depends on Bug 15785 - Use Font Awesome icons in confirmation dialogs
To test, apply the patch and go to Administration -> MARC framworks.
- Click 'MARC structure' for a framework you can edit.
- Click 'subfields' for a tag you can edit.
- Click 'Delete' for a subfield you can delete. You should see a
confirmation dialog styled like other "alert" type dialogs.
- Test both canceling and confirming deletion to confirm that both
function correctly.
Revised to fix conflicts with rollback of Bug 13618
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected. Revised according with bug revert 13618
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Fri, 19 Feb 2016 18:30:44 +0000 (13:30 -0500)]
Bug 15867: Move MARC modification templates JavaScript into separate file
The JavaScript embedded in the MARC modification templates template is
not dependent on template processing to such an extent that it can't
be safely moved to a separate file. This patch does so, adding
definition of a some translatable strings to the template.
Other minor changes: A couple of JSHint warnings corrected, a couple of
missing semicolons added to template markup.
To test, apply the patch and go to Tools -> MARC modification templates
- Confirm that The add/update form works normally with various actions
(Add/update,Delete,Move, etc.).
- Confirm that template switching works correctly.
- Confirm that template deletion confirmation works correctly.
- Confirm that cancelling an edit works correctly
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Tue, 23 Feb 2016 14:16:13 +0000 (09:16 -0500)]
Bug 15884 - Vendor contract deletion warning is incorrectly styled
When deleting a contract in Acquisitions -> Vendor -> Contracts, the
deletion confirmation message is not styled with the standard "dialog
alert" <div>. This patch modifies the confirmation markup to match the
standard.
To test, apply the patch and go to Acquisitions -> [ a vendor] ->
Contracts
- Try deleting a contract. The confirmation box should have the standard
"dialog alert" class.
- Test the 'confirm' and 'cancel' actions and make sure both complete
correctly.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 25 Feb 2016 18:45:54 +0000 (13:45 -0500)]
Bug 15920: Clean up and fix errors in batch checkout template
The batch checkout template has some markup and JavaScript problems
which need to be resolved, including:
- Mismatched <h3></h1>
- JavaScript includes which are not used
- Incorrect DataTables configuration
- Incorrect class on warning dialogs
- Incorrect terminology: Use "checkout" instead of "issue"
This patch also changes the markup and styling of batch checkout errors,
using Font Awesome icons to retain highlighting of warnings and errors
while (I hope) improving readability.
To test, apply the patch and go to batch checkout for a patron for whom
batch checkouts are enabled.
- Check out a batch of barcodes. Include items which will trigger errors
or warnings. For example: Invalid barcodes, lost items, items which
are already checked out, items which are on hold for another patron,
items which are damaged.
- When the table of items is displayed so that you can confirm the
checkout, make sure the table is sortable.
- Think about whether the style changes on warnings and errors are an
improvement.
- Try to initiate a batch checkout to a patron who is restricted. You
should see an "alert" style dialog instead of a "message" style one.
- Validate the HTML and confirm that there are no errors raised by this
template's markup.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 29 Feb 2016 07:32:14 +0000 (07:32 +0000)]
Bug 15674: Make "Column visibility" translatable
The "Column visibility" text button was not translatable, now it is.
Test plan:
1/ Update the template for a given language and translate the "Column
visibility" string
2/ Go on admin/currency.pl
=> The string should be translated.
Owen Leonard [Mon, 22 Feb 2016 18:09:00 +0000 (13:09 -0500)]
Bug 15880 - Serials new frequency link should be a toolbar button
This patch converts the "new frequency" link to a Bootstrap-style
toolbar button in order to maintain consistency. Also included in this
patch are some other minor markup corrections:
- A colon and space after labels
- A 'Cancel' link instead of a button.
- "Required" classes for a required field.
To test, apply the patch and go to Serials -> Manage frequencies.
- Test the "New frequency" button
- Confirm that the changes to the entry form look correct.
Followed test plan, displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Mon, 22 Feb 2016 18:21:28 +0000 (13:21 -0500)]
Bug 15881 - Serials new numbering pattern link should be a toolbar button
This patch converts the "new numbering pattern" link to a
Bootstrap-styled toolbar button for consistency with other pages in
Koha. This patch also includes minor markup corrections:
- Standardizing on the phrase "Numbering patterns" by eliminating the
occasional use of "number patterns."
- Removing mistaking closing slash on <select>
- Using standard "Cancel" link instead of a button.
- Adding a colon and space after labels.
- Fixing of "no existing patterns" message.
To test, apply the patch and go to Serials -> Numbering patterns
- Confirm that the "New numbering pattern" button looks correct and
works correctly.
- Confirm that the entry form looks correct and that the cancel link
works as expected.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 1 Mar 2016 10:52:39 +0000 (10:52 +0000)]
Bug 15939: Action logs - Do not default dates to today
When accessing the modification logs from a link that does not
explicitly set the to and from dates (e.g., from patron or bib details),
no results are displayed unless the object had an action occur during
the current day.
This is a side-effect of commit 5dceb851 for bug 13813.
Test plan:
- View the modification logs of a record which has already been modified
(/tools/viewlog.pl?do_it=1&modules=CATALOGUING&action=MODIFY&object=XXX)
=> Without this patch, you won't see any logs (unless you have modified
the record today)
=> With this patch, the behavior is the same as prior bug 13813 (you can
check in 3.20.x), you will see all logs
Kyle M Hall [Mon, 15 Feb 2016 12:58:14 +0000 (12:58 +0000)]
Bug 15842 - Cannot import patrons if the csv file does not contain privacy_guarantor_checkouts
When importing patrons with a csv file which does not contain the privacy_guarantor_checkouts column in the header, you will get
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'privacy_guarantor_checkouts' cannot be null at /home/koha/src/C4/Members.pm line 768
The same issue seems to occur for sms_provider_id.
Test Plan:
1) Attempt to import patron csv file with no privacy_guarantor_checkouts column
2) Note the error
3) Apply this patch
4) Repeat step 1
5) The error should no longer occur
NOTE: While this patch does work, should it be solved only
at this level? The issue that there is the lack of those two
fields on the tools screen still exists.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Set 'B' to the default dom of Datatable constructor.
This cannot work if there is no button defined.
This patch defined an empty 'buttons' param for this constructor, DT
does not raised an error anymore when initialising.
Test plan:
Confirm that the tables on the following tables are not broken:
- circ/waitingreserves.pl
- circ/reserveratios.pl
- patron_lists/lists.pl
- virtualshelves/shelves.pl
- acqui/invoices.pl
And with datatables:
- circ/circulation.pl
- admin/currency.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 29 Feb 2016 08:10:59 +0000 (08:10 +0000)]
Bug 15923: Take the id list file into account when exporting records
When exporting records (tools/export.pl or misc/export_records.pl), a
file of ids (authid or biblionumber) can be passed to filter the
results.
Bug 14722 has broken this behavior.
Test plan:
Export records and specify a list of records to filter the results.
Prior to this patch, the record with the id 1 was exported.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mirko Tietgen [Thu, 22 Oct 2015 17:39:37 +0000 (19:39 +0200)]
Bug 14168 - enhance streaming cataloging to include youtube
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds test cases for the new syspref NoRenewalBeforePrecision.
Tests if GetSoonestRenewDate returns correct values for both 'date' and
'exact_time' settings.
Also adds a few comments related to bugs 7413 and 14101.
To test:
1) prove t/db_dependent/Circulation.t
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Bug 14395: Add new syspref NoRenewalBeforePrecision
Currently the 'NoRenwalBefore' setting is always based on the exact
DateTime of the due date. This patch introduces a new global syspref for
choosing if 'NoRenewalBefore' should instead be calculated based on date
only. This is only relevant for loans caluclated in days. Hourly loans
are not affected.
To test:
1) Apply bug 14101, then apply this patch.
2) Run installer/data/mysql/updatedatabase.pl
3) Confirm that a new syspref NoRenewalBeforePrecision is available
in administration. It should let you choose between 'date' (default)
and 'exact time'.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Barry Cannon [Wed, 16 Dec 2015 10:37:17 +0000 (10:37 +0000)]
Bug 15311 - Let libraries set text to display when OpacMaintenance = on
Added new systempreference OpacMaintenanceNotice.
When OpacMaintenance is ON the HTML contents of OpacMaintenanceNotice will
be displayed.
Enabling OpacMaintenance is all that is required to enable this preference.
If OpacMaintenanceNotice is undefined, the default (original) notice will
appear when OpacMaintenance is enabled.
To test:
- Enable OpacMaintenance systempreference
- Observe the default maintenance message when OPAC is viewed
- Edit OpacMaintenanceNotice systempreference, adding custom HTML
- Observe the custom HTML appear on the opac
- Remove OpacMaintenanceNotice (mindful of orphaned spaces etc.)
- Observe the default opac notice appears in the opac
- Disable OpacMaintenance
- Observce opac is back online
Moving code to atomic update and fixing merge conflict
NOTE: Accounted for an SQL typo and autoescaping of the template.
If someone else could test this, then I would be fine with
marking it signed off.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Barry Cannon [Tue, 14 Jul 2015 11:25:55 +0000 (12:25 +0100)]
Bug 14523 - Google jackets being blocked when OPAC using HTTPS
This patch changes the Google jackets URL to use HTTPS instead of HTTP.
Test Plan:
1) Enable Google Jackets
2) Ensure the Koha OPAC instance is configued to use HTTPS
3) Confirm Google jackets display correctly.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 28 Jan 2016 20:33:58 +0000 (20:33 +0000)]
Bug 15697: Unnecessary comma between title and subtitle on opac-detail.pl
To test:
1 - Go to Administration->Keyword to MARC mapping
2 - Add a mapping (or ensure it exists)
Field name: subtitle
MARC field: 245
MARC subfield: b
3 - View a record with a subtitle in the opac
4 - Note in MARC 21 you have "Title of record:, subtitle of record"
5 - Apply patch
6 - View the record again and note the comma is no longer present.
Note: this patch removes the comma only for MARC21 where subtitle is not
repeatable. UNIMARC seems to be repeatable and does not include
punctuation so I believe this may be needed there.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Comma removed from title of the window and breadcrumb
section
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Modify webinstaller sql files for marc21_orgcode plugin
This patch updates the sql installer files for new installations.
Occurrences to the three plugins marc21_field_003, 040c and 040d are
replaced by marc21_orgcode.pl.
This has been generated by one sed statement.
Test plan:
[1] Run a new installation or run some of the changed sql files manually.
[2] Verify that marc21_orgcode is linked to fields previously linked to
the three old plugins.
[3] Do a git grep on the three plugin file names. No occurrences expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Have tested the three english sql files:
authorities_normal_marc21.sql: 18 rows with marc21_orgcode (003 and 040a
for 9 auth codes)
marc21_framework_DEFAULT.sql: 1 row with marc21_orgcode (003) -- this patch
does not add them to 040c or 040d; no behavior change..
marc21_simple_bib_frameworks.sql: 8 rows (003 for 8 frameworks)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The following files do no longer need an adjustment:
installer/data/mysql/de-DE/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/es-ES/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/it-IT/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
For details, check Bug 15097: Update MARC21 de-DE frameworks to Update 21.
And similar reports for es-ES and it-IT.
Verified this change by installing de-DE in the webinstaller. The plugin for
field 003 was correctly set to marc21_orgcode.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Database revision for marc21_orgcode.pl
This patch adds the dbrev in atomicupdate, updating the marc structure
for existing installations. (New installation in previous patch.)
And it removes the obsolete plugin files.
Test plan:
Run upgrade. Verify that new plugin is linked (for bib and auth).
Check plugin in editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Plugin tested, added to 040a/c/d
Test pass
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Unify marc orgcode plugins, not overwriting existing values
This patch copies code from marc21_field_003.pl to create marc21_orgcode.pl
for more generic use. Other fields like 040c or 040d should use it too.
Note: The plugin is used for authorities too (003, 040a).
One behaviour change is added: If the corresponding field is already
filled, it will not be overwritten.
In the unit test marc21_orgcode already replaces marc21_field_003.
Test plan:
[1] Attach plugin marc21_orgcode to a field (e.g. 003) and test it in
the MARC editor of Cataloguing or Authorities.
[2] Check if a value is not overwritten any more.
[3] Run unit test t/db_dependent/FrameworkPlugin.t; don't be distracted by
the noisy warnings of marc21_field_007.pl. They will be addressed on
another report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Fri, 18 Dec 2015 17:20:07 +0000 (10:20 -0700)]
Bug 14658 - (QA followup) make it easier to grep for these syspref names
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 17 Aug 2015 21:00:10 +0000 (15:00 -0600)]
Bug 14658 - Split PatronSelfRegistrationBorrowerUnwantedField into two preferences for creating and editing
Test plan:
1) Make sure there is at least one field in PatronSelfRegistrationBorrowerUnwantedField.
2) Apply patch, and update database.
3) Check to make sure that the new system preference
PatronSelfModificationBorrowerUnwantedField has the same value as
PatronSelfRegistrationBorrowerUnwantedField.
4) Verify that the same fields are hidden for self-registering a new
borrower and edting a new one (both on the OPAC).
5) Change PatronSelfModificationBorrowerUnwantedField, and verify that
the two preferences correctly apply to editing vs. creating.
Signed-off-by: Michael Sauers <msauers@dospace.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 6 Jan 2016 10:41:44 +0000 (10:41 +0000)]
Bug 4941: Remove the singleBranchMode system preference
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 10 Feb 2016 17:37:11 +0000 (17:37 +0000)]
Bug 15798: Remove C4::Koha::displayServers
This subroutine is no longer is use and can be removed.
Test plan:
git grep displayServers
should not return any results.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 18 Feb 2016 02:19:30 +0000 (21:19 -0500)]
Bug 15071 - In OPAC search results, "checked out" status should be more visible - Compiled CSS
Compiled CSS file.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 18 Feb 2016 02:17:10 +0000 (21:17 -0500)]
Bug 15071 - In OPAC search results, "checked out" status should be more visible
The prog template in the OPAC designated a color for the "unavailable"
class associated with items in search results which are checked out.
This class never made it into the Bootstrap theme. This patch adds it to
the Bootstrap theme's LESS file.
To test, apply the patch and search the OPAC for terms that will return
checked out items. In the list of search results, on the "availability"
line, the "Checked out" text should now be red. The change is visible
with XSLT on or off.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 24 Feb 2016 12:39:38 +0000 (13:39 +0100)]
Bug 15891: Fix errors on updatedatabase
Two curly braces..
Test plan:
Run the update.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 18 Dec 2015 19:30:13 +0000 (19:30 +0000)]
Bug 15343 [QA Followup] - Fix issues
1) "Contact information" should be "Password"
2) Don't pass sysprefs from the script to the template, use Koha.Preference()
3) minPasswordLength is optional, we cannot always assume it is set
4) Password field when does not follow convention completely when mandatory
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nick Clemens [Sat, 12 Dec 2015 02:10:06 +0000 (02:10 +0000)]
Bug 15343 - Allow user to set password on opac-memberentry.pl
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Julian Maurice [Tue, 5 Jan 2016 11:24:57 +0000 (12:24 +0100)]
Bug 15471: Add column settings and filters to Holds queue table
Add column visibility menu using DataTables Buttons
Add a text filter on top of each column
Also extend page width so that the large table is better centered
Depends on bug 15285
Test plan
1. Go to Holds queue page (circ/view_holdsqueue.pl)
2. Check that table sorting and filtering work well and that you can
hide each column
3. Go to Admin > Configure columns and change the settings for this
table (Circulation > view_holdsqueue > holds-table). Verify that the
settings work by going again to the Holds queue page
4. Check that filters continue to work after hiding some columns
Tested on top of 15285, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Fri, 5 Feb 2016 00:29:22 +0000 (00:29 +0000)]
Bug 15629 [QA Followup]
* Use ->id instead of ->branchcode when possible to eliminate use of that nomenclature
* Fix bad use of ->branchcode to ->{branchcode} for unblessed hashref version of Koha::Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 13:22:48 +0000 (13:22 +0000)]
Bug 15629: Koha::Libraries - Remove GetBranchInfo
C4::Branch::GetBranchInfo was only used once in opac/opac-suggestions.pl
The occurrence can easily be replaced by a call to Koha::Libraries->find
Test plan:
1/ Create a suggestion for library A
2/ Enable OPACViewOthersSuggestions
3/ Use a patron from library B to see the suggestions
4/ The "Suggested for" value should be correctly filled with the library
A name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 13:13:14 +0000 (13:13 +0000)]
Bug 15629: Koha::Libraries - Remove ModBranch
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory is not used anymore and can be
removed.
Test plan:
git grep GetBranchesInCategory
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory can be replaced with
Koha::LibraryCategory->libraries
Test plan:
1/ Define some 1+ group of libraries with 1+ libraries each
2/ Go on the advanced search (OPAC and Staff) and select a group of
libraries
3/ The result should be consistent and only include record from these
libraries
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
For consistency, the branchcodes method of Koha::LibraryCategory should be
named libraries.
At the moment, there is only one occurrence, in admin/branches.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 15:00:33 +0000 (15:00 +0000)]
Bug 15631: Koha::Cities - remove getidcity and GetCities
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 26 Jan 2016 02:12:38 +0000 (02:12 +0000)]
Bug 15662: String and translatability fix to Label Creator
To test:
1) Go to Tools -> Label Creator -> New label batch
2) Add an item
3) Click 'Remove selected items' button. Confirm message now reads "Please select at least one label to delete."
4) Click 'Remove duplicates' button. Confirm message now reads "Duplicate item(s) removed from batch number X: Y", all in bold.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translatability purpose
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 26 Jan 2016 04:45:51 +0000 (04:45 +0000)]
Bug 15665: Better wording of error messages when importing MARC frameworks
UPDATE: Making error messages the same
To test:
1) Go to Admin -> MARC frameworks
2) Click Import next to any framework. You won't actually be overwriting or importing anything as this is only a string fix, so it can be an existing framework
3) Click the Import button without attaching any file. Confirm it says "Please select a spreadsheet (.csv, .ods, .xml) file." and that this makes sense to you
4) Attempt to attach a file that is not a .csv, .ods or .xml file. You should instantly get an error message saying "Please select a CSV (.csv), ODS (.ods) or XML (.xml) file." Confirm this shows up and makes sense to you
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok. Works as described
Owen Leonard [Wed, 17 Feb 2016 23:27:11 +0000 (18:27 -0500)]
Bug 15671 - Show branch name instead of branch code in checkout history
When viewing the checkout history for a title the branchcode is
displayed. This patch alters the template to show the library name
instead.
To test, apply the patch and locate a title in the staff client which
has been checked out at least once. From the detail page, click
"Checkout history" in the sidebar. The "Checked out from" column of the
checkout history table should show the library name instead of the
branchcode.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 1 Feb 2016 12:48:06 +0000 (13:48 +0100)]
Bug 15713: Restart zebra when rotating logfiles
Somehow, it may happen that Zebra keeps writing to the old rotated logfile
with extension .log.1. I must add that although I saw that happen (a new
log was created and was empty, while Zebra kept writing to log.1 for weeks),
I cannot reproduce it every time.
By stopping the zebra server in prerotate and starting it again in
postrotate, this should not happen at all. In practice, this implies that
your Zebra server is restarted once a week.
Note: The existing sharedscripts directive makes sure that these actions
are not executed for all individual logfiles but once for all matching
logfiles (even when running multiple instances).
Test plan:
[1] Apply the change in koha-common.logrotate to the file
/etc/logrotate.d/koha-common.
[2] Run logrotate -f /etc/logrotate.conf (forcing a logrotate).
[3] Check in zebra-error.log that your zebra server was stopped
('killed by signal 15').
[4] Verify that your Zebra server runs (read: has been restarted).
(Do a search..)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Wed, 3 Feb 2016 14:59:02 +0000 (15:59 +0100)]
Bug 15714: Add zebra_loglevels to koha-conf.xml
This patch adds a commented zebra_loglevels line to the config file.
Behavior does not change, but an admin can easily edit the variable.
Test plan:
Nothing really changed. But if you are not so sure about that, apply the
change to /etc/koha/koha-conf-site.xml.in and run koha-create. Check
that the new koha-conf contains the line and is not messed up.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Tue, 2 Feb 2016 15:40:06 +0000 (16:40 +0100)]
Bug 15714: Remove zebra.log and add loglevels
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 1 Feb 2016 14:36:26 +0000 (15:36 +0100)]
Bug 15714: Add get_loglevels to koha-functions.sh
Preparing for including different log levels in koha-start-zebra.
Note that the default response is none,fatal,warn; this is equal
to the options passed to zebrasrv in koha-start-zebra (for now).
Test plan:
[1] Run on the command line: source koha-functions.sh
[2] Type get_loglevels [your_instance]
By default, you should see: none,fatal,warn
[3] Add this line to your koha-conf:
<zebra_loglevels>how,are,you</zebra_loglevels>
[4] Run get_loglevels [your_instance] again.
Remove the nonsense log levels again..
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 10 Feb 2016 10:32:52 +0000 (10:32 +0000)]
Bug 15783: AddAuthorisedValue - Remove the subroutine
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The C4::Koha::AddAuthorisedValue is only called twice from
reports/guided_reports.pl and insert an authorised value.
This job can be achieve easily using the Koha::AuthorisedValue module.
Test plan:
1/ Create a new guided report
2/ Use an existing group and/or subgroup of reports
3/ Save
4/ Update an existing report
5/ Use an existing group and/or subgroup of reports
6/ Save
7/ Create or update an existing report
8/ Remove its assigned group and subgroup
9/ Save
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jesse Weaver [Wed, 6 Jan 2016 20:19:10 +0000 (13:19 -0700)]
Bug 15813: Fix list-context call to ...->guarantor in opac-memberentry.pl
(was: Bug 14658: (followup) fix issue with list context on DBIC call)
While working on bug 14659, it was discovered that the call to
...->guarantor in list context will cause the hash to be misaligned if
there is no guarantor.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 04:29:59 +0000 (04:29 +0000)]
Bug 15826 - Use Font Awesome icons in confirmation dialogs - Tools
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
projects / koha.git / log