Owen Leonard [Mon, 12 Aug 2013 16:31:52 +0000 (12:31 -0400)]
Bug 10730: Use DataTables on the tag review page
This patch enhances the tags review page in the staff client by adding
DataTables sorting to the table of tags.
It also converts the tag list page (list.tt) to use the new DataTables
include introduced by Bug 10649.
To test, apply the patch and view the tags review page for various
categories: Pending, approved, rejected, all. The table should be
sortable by status, term, weight, and date. Sorting by date should work
correctly regardless of date format preference. Title sorting on the tag
list page should work correctly.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Replace tab with 4 spaces
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10687: Delete erroneous tags 68a and 68b on default MARC21 auth framework
This patch deletes information for default
MARC21 auth framework on tags 68a and 68b.
Also added update for current installs.
RM note: The 68a and 68b fields were defined in an attempt to include
both MARC21 classification and MARC21 authority records in the same
default framework, but I don't think this has turned out to be useful,
as to my knowledge nobody tries to use MARC21 classification records
in Koha, and if one were to want to, a distinct record type (or at
least auth_type) would be a better way to do it.
To test with current authorities_normal_marc21.sql loaded
1) apply the patch
2) run updatedatabase
3) check on database that there are no more
references to tags 68a and 68b
To test for new installs
1) remove auth frameworks
2) load authorities_normal_marc21.sql
3) check that load without problem
4) check on database that there are no more
references to tags 68a and 68b
Bug 9761: Unit tests for ConfirmFutureHolds changes
Adds tests for CheckReserves with lookahead parameter.
Adds tests for AddReturn with regard to future reserve messages.
The following test cases are added, resulting in 8 new tests:
a) Add a reserve without date, CheckReserve should return it
b) Add a reserve with future date, CheckReserve should not return it
c) Add a reserve with future date, CheckReserve should return it if lookahead
is high enough
d) Check ResFound message of AddReturn for future hold
Test plan:
Run the test. No fails?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 7 Mar 2013 17:46:04 +0000 (18:46 +0100)]
Bug 9761: Reformulating the preference description
After some thought, I had to reformulate what this pref does.
No code changes here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 7 Mar 2013 13:57:25 +0000 (14:57 +0100)]
Bug 9761: dbrev for ConfirmFutureHolds
Db rev for new pref ConfirmFutureHolds.
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 4 Mar 2013 13:47:57 +0000 (14:47 +0100)]
Bug 9761: Make it possible to confirm future hold requests at checkin time
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 29 Aug 2013 20:26:50 +0000 (22:26 +0200)]
Bug 10803: make "Make payment" in circ easier to translate
To test:
- Choose a patron account
- Add a fine to it
- Switch to the checkout tab of the patron account
- Check for the "Make payment" link. Make is not a link, but payment is.
- Apply patch
- Check again, now both words are linked.
In translation this string is divided into:
. %s Make
payment
Because of this it's difficult to translate it grammatically.
The patch moves 'Make' into the link text, so that both words
will show up together in translation.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. No koha-qa errors.
Not only improves translatability,
also corrects capitalization.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 20 Sep 2013 15:31:57 +0000 (11:31 -0400)]
Bug 10924: fix updating contact note from OPAC
If you update your "Contact note" via the OPAC that change doesn't
appear in the staff client's "Update patron records" interface. The
field is missing from members-update.tt
To test, log in to the OPAC and update your details
(opac-memberentry.pl), modifying the "Contact note" in the "Alternate
address" section.
In the staff client, view "Patrons requesting modifications"
(members/memgers-update.pl). The changed contact note field should
appear in the list of field awaiting approval for that patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line change - contact note now updates perfectly.
Kyle M Hall [Wed, 18 Sep 2013 19:24:08 +0000 (15:24 -0400)]
Bug 10911: fix invalid links when displaying records that have 880 fields
Koha intranet search results using XSLT for records with 880 fields have
the details link created by a code path that incorrectly links to some
opac pages.
Test Plan:
1) Enable XSLT for intranet search results
2) Upload or create a record with at least one 880 field
3) Search for the item ( must have multiple hits to avoid redirection )
4) Click the title link, note it is broken
5) Apply this patch
6) Click the title link, note it is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, no koha-qa errors.
Test
1) imported two times sample record
2) reindex
3) search, find example record, broken links
4) applied patch
5) refresh, good links
NOTE: A similar (invalid references) problem is present on
UNIMARC and NORMAC files
I'll file a new bug for those cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, tested with a different set of sample
records with Hebrew 880 fields.
Bug 10465: remove useless reference to fields 780 and 785 in UNIMARC XSLT files
UNIMARCslim2OPACDetail.xsl and UNIMARCslim2intranetDetail.xsl contained
references to 780 and 785 fields, that exist in MARC21 but not in UNIMARC.
This patch remove the code related to 780 and 785 fields. No effect should
be visible.
To test : in a UNIMARC Koha
1. Be sure that OPACXSLTDetailsDisplay, OPACXSLTResultsDisplay,
XSLTDetailsDisplay and XSLTResultsDisplay sysprefs are set to "default"
2. Apply the patch
3. Search some records in staff interface : the list view and the detail
view must be exacty the same as before you apply the patch.
4. search some records in OPAC : the list view and the detail view must
be exactly the same as before you apply the patch.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No diplay change, no koha-qa errors.
Removes what can't be displayed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked detail pages in OPAC and intranet still display correctly
and without errors.
Katrin Fischer [Tue, 10 Sep 2013 19:18:13 +0000 (21:18 +0200)]
Bug 10847: Open link to vendor's website in new window
To test:
- Create a new vendor or edit an existing one
- Make sure you have entered a valid URL for the website
- Click the link from the vendor summary page and verify it opens
in a new window/tab (depending on your browser configuration)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 21 May 2013 19:58:44 +0000 (15:58 -0400)]
Bug 10305 - _increment_barcode is called twice
For some reason, _increment_barcode is called twice in succession in
cataloguing/additem.pl
Test Plan:
1) Enable autobarcode = incremental
2) Catalog an item, not the barcode
3) Apply this patch
4) Catalog another item, the barcode should be the next in line
as previously. No change should be noted.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Owen Leonard [Tue, 10 Sep 2013 12:25:44 +0000 (08:25 -0400)]
Bug 10651 - Use new DataTables include in administration templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
administration-related pages which use DataTables.
To test, view the following pages and confirm that table sorting is
still working correctly:
- Administration -> Budgets
- Administration -> Authority types -> MARC structure
- Administration -> Authorized values
- Administration -> Library transfer limits
- Administration -> Libraries and groups
- Administration -> Patron types and categories
- Administration -> Cities and towns
- Administration -> Item types
- Administration -> MARC bibliographic framework -> MARC structure
- Administration -> System preferences
- Administration -> System preferences -> Local use
- Administration -> Z39.50 client targets
Owen Leonard [Tue, 10 Sep 2013 16:18:32 +0000 (12:18 -0400)]
Bug 10868 - Use new DataTables include in catalog templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
catalog-related pages which use DataTables.
The checkout history script has been altered to send unformatted dates
to the template, and the template now uses the "title-string" sorting
filter to enable sorting on unformatted dates.
To test, view the following pages and confirm that table sorting is
still working correctly:
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Sorting works. No koha-qa errors. Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: On the issue history page:
1/ If the checkin on is empty (the item is currently checked out), the line
is sorted in last.
2/ The Renewed column is not sorted by date.
Before this patch, the sort was worse.
Bug 7813: (follow-up) use descriptive text for delete link
This patch replaces the "times" symbol for the local cover image
deletion link with more descriptive text. This was done because
the original "X" was small, is not necessarily going to be universally
understood to signify the deletion action, and because "×"
does not give much context to translators.
Jonathan Druart [Fri, 20 Sep 2013 11:06:48 +0000 (13:06 +0200)]
Bug 7813: (follow-up) improvements for deleting local cover images
This patch:
- displays a js alert if a problem occurred on deleting the
image on the server.
- adds a class for the new span (in order to avoid future problem, if
someone adds a new span).
- adds a title for the [X] link.
- deal with the upload_local_cover_images permission (don't display the
delete link if the logged in user does not have it).
- changes the license version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I like the ehancements to the original patch and work as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the ability to delete local cover images from the
detail page. It adds an 'X' button to trigger the deletion. It occurs
using a new SVC script called cover_images that accepts the following
parameters:
It then deletes all valid images passed and returns a JSON object
containing the imagenumbers and the deletion status (1/0). The operation
is triggered using jQuery.ajax, and with the response the corresponding
images get deleted.
Note: currently one image is deleted at a time, but the code is there to
be used.
To test:
- Open the detail page fr a biblionumber containing one or more cover
images, go to its images tab.
- Apply the patch, reload the page, go to the images tab.
- Thumbnails should look better than before ;-)
- An 'X' button should show below each cover.
- Clicking the 'X' button should trigger an alert message asking for
confirmation.
a) Cancel: nothing happens, reload the page and check nothing got
deleted.
b) Accept: the deleted image should be gone, reload the page to check
it doesn't exist anymore and is not a browser/DOM manipulation trick.
- Signoff
Note: check having more cover images than those that fit the width and
see it wraps fine.
P.S. I chose not to implement every possible action on the svc script, but
another bug could be filled for more improvements.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 13 Sep 2013 18:45:50 +0000 (14:45 -0400)]
Bug 10888: Don't hide authorities module from users who lack permission to edit authorities
It should be possible for staff client users to search and view
authority records even if they don't have permission to edit them.
To test, apply the patch and view the staff client as a user with and
without "editauthorities" permission.
With "editauthorities" permission, authority search results should show
both an edit and delete link. Viewing the details of an authority
record, one should see a toolbar with edit/delete/new options.
The detail view has been altered to use the term "record" in place of
"biblio" ("Used in X record(s)).
Without "editauthorities" permission, authority search results should
show no edit or delete link. Viewing the details of an authority, the
only option shown in the toolbar should be "Save."
On the staff client home page and in the header's "More" menu the link
to the authorities module should now appear with and without permission
to edit authorities.
This patch also corrects the permissions in the authority export script
to allow saving of authority records by users who do not have permission
to edit.
Magnus Enger [Fri, 9 Aug 2013 08:05:23 +0000 (10:05 +0200)]
Bug 10622 - [SIGNED OFF] Followup: Add --sip, --nosip and --help to man page
The original patch for bug 10622 added the --sip, --nosip and
--help switches to the koha-list command, but did not update the
manpage for the command. This patch does.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-list.xml
$ man -l koha-list.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Forgot the docs this time, good catch Magnus
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10622: add --sip and --nosip switches to koha-list
Just added those switches.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I applied the patch on my local dev install, and then copied the
patched koha-list script to a couple of servers with actual
instances running off the packages, to test the script.
- It seems that the -h switch did not work before this patch, now
both -h and --help works nicely
- --sip and --nosip work as expected, also in combination with
--email and --noemail
The patch does not add --sip and --nosip to the man page for
koha-list, but I will do a followup for that.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Removed unused stuff, added a new config file /etc/default/koha-common
to control the init script behaviour. Currently is only a stub. The config
file could be put on /etc/sysconfig on RedHat and friends. The init script
should work them too. Added a TODO comment regarding the 'status' switch.
To test:
- Apply the patch on master, build your own packages and install.
- The init script should continue to work as expected.
(it can be tested replacing the /etc/init.d/koha-common file with
debian/koha-common.init on a packages install).
- The absence of the /etc/default/koha-common file should not prevent
the init script from working.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Tue, 10 Sep 2013 19:10:28 +0000 (21:10 +0200)]
Bug 10871: Make confirmation message for deleting news translatable
To test:
- Create a news entry in tools > news
- Delete the news entry or multiple entries by selecting them
using the checkboxes to the left and the delete button at the
bottom of the page.
Verify confirmation message shows up correctly with patch applied.
Bonus:
- Update one of the po files and make sure the new strings shows up
there.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10915: (QA followup) warn if cannot read history.txt
This patch makes about.pl test if success opening history.txt, and
shows a convenient warning to the end user. No more warnings in the logs
(about.pl: readline() on closed filehandle $file at /usr/share/koha/intranet/cgi-bin/about.pl line 166)
and better problem solving information for the end user.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mason James [Thu, 19 Sep 2013 12:06:20 +0000 (00:06 +1200)]
Bug 10915: fix About->timeline breakage on incompletely upgraded Koha
This patch supplies a default value for the koha-conf.xml
setting docdir to handle the case where the user neglects
to set it upon upgrade.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixes dev and standard installs without docdic tag in koha-conf.xml.
Doesn't break when docdir present either. Warning still present
on packages install that didn't add the docdir definition in koha-conf.xml
David Roberts [Mon, 16 Sep 2013 15:51:33 +0000 (16:51 +0100)]
Bug 10894: Add ID to main address in member entry form
Add an ID to ease customization via jQuery; an ID is already present
on alt address but was missing from main address
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10601: (follow-up) improvements to ->set() and ->get()
This patch improves the POD for C4::BackgroundJob->get(). It also
fixes ->set() so that it cannot scribble over values that are properly
internal to the object.
Bug 10601: (follow-up) unit tests for new ->set() and ->get()
This adds unit test for the new methods in C4::BackgroundJob. One
of the tests verfies that setting extra values does not scribble over
data that is mean to be internal to the C4::BackgroundJob object.
To test:
Verify that prove -v t/db_dependent/BackgroundJob.t passes.
Jonathan Druart [Tue, 16 Jul 2013 15:28:43 +0000 (17:28 +0200)]
Bug 10601: Add a counter on batch items modifications
After executing a batch items modifications, a dialog is displayed above
the result table. It contains the number of items (and total fields)
which has been modified.
Note that items that are selected for modification but which do not
end up actually be changed are not reported in the final counts.
This patch adds two methiods to C4::BackgroundJob, ->set() and ->get(),
that allow background jobs to pass arbitrary data back to the client.
Test plan:
1/ Go to tools/batchMod.pl
2/ Enter a barcodes list
3/ Check/uncheck items and fill some values to apply
4/ Save
5/ The table summary will be displayed with a dialog box on top:
XX item(s) modified (with YY fields modified)
Check that XX and YY correspond with what you expected.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
batch modification still seems to work correctly, with the helpful addition of the counter. Thanks!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 16 Jul 2013 14:43:30 +0000 (16:43 +0200)]
Bug 10599: add option to unselect on loan items on the batch item modification tool
Sometimes when using the batch item modification tool, we would like to
automatically uncheck on loan items.
This patch also adds a new routine in C4::Circulation, IsItemIssued(),
which, when passed an itemnumber, returns whether the item is
currently on loan.
Test plan:
1/ Go to tools/batchMod.pl.
2/ Enter some barcode (at least 1 should be on loan).
3/ Click on the Continue button.
4/ Click on the "Clear on loan" link.
5/ Check that on loan items are unchecked.
Launch the unit test file:
prove t/db_dependent/Circulation/IsItemIssued.t
http://bugs.koha-community.org/show_bug.cgi?id=10572 Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as expected, only modifies items that are checked (still). No regression noted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Marcel de Rooy [Wed, 29 May 2013 12:24:05 +0000 (14:24 +0200)]
Bug 10376: fix ability to print cart from IE9 & 10
Test plan:
1) Test with Firefox (or any other browser except IE):
Add biblio to cart
Go to Cart and click Print
Does the Cart window come back to its original state after confirm/cancel Print?
2) Test with Internet Explorer (I used IE9; testing another version is fine)
Do the same as above. Is behavior now more or less the same?
Signed-off-by: Marc Veron <veron@veron.ch>
1) Test without patch:
IE 10: Does not show print dialog
IE 9 (Developer Emulation in IE 10): Does not show print dialog (as expected)
FF 21.0 OK
Chrome 27.0.1453.110 m: OK
2) Test with patch:
IE 10: OK
IE 9 (Developer Emulation in IE 10): OK
IE 8 (Developer Emulation in IE 10): OK
IE 7 (Developer Emulation in IE 10): OK
FF 21.0 OK
Chrome 27.0.1453.110 m: OK
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Trusting Marc here, as I don't have IE available.
Regression tests in Firefox and Chromium went well.
Owen Leonard [Thu, 15 Aug 2013 20:14:50 +0000 (16:14 -0400)]
Bug 9294 - Move JavaScript out of circulation template
This patch creates a new js file, js/pages/circulation.js, and begins
the process of moving JavaScript into it from circulation.tt. I have
started the process by focusing on sections which are least dependent on
template variables.
To test, load a patron for checkout who has something checked out.
There should be no JavaScript errors:
- Tabs should work.
- Showing and hiding the "Add message" form should work.
- The "specify due date" datepicker should work.
- Controls for selecting checkboxes in the checkouts table should work
Signed-off-by: Campbell Reid-Tait <campbellreidtait@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Just found a weird behavior with checkboxes in the checkouts table, but
still exists on master.
Kyle M Hall [Wed, 14 Aug 2013 18:25:58 +0000 (14:25 -0400)]
Bug 10731: fix use of IntranetSlipPrinterJS by hold slips
Hold slips aren't printing automatically with JS Print Setup because it
appears the system preference IntranetSlipPrint is never being passed to
the template.
Test Plan:
1) Set up JSPrintSetup
http://wiki.koha-community.org/wiki/Setting_up_slip_printer_to_print_silently
2) Place a hold
3) Check the item in to capture the hold
4) Click "Print and confirm"
5) Note the slip does not print automatically
6) Apply this patch
7) Repeat steps 2 through 4
8) Observe that the slip now prints automatically
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Fri, 13 Sep 2013 10:47:15 +0000 (06:47 -0400)]
Bug 10876: Fix opac-MARCdetail.pl displaying items that are meant to be hidden
When OpacHiddenItems is used to hide some, but not all of the
items for a biblio, then the opac-MARCdetail page displayed
all the items, rather than just the ones intended to be visible.
By determining the tag and subtag for items.itemnumber, the
loop which builds the big array can be filtered to exclude
records that should be hidden.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, passes koha-qa also.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10872: UT for GetHiddenItemnumbers and POD fix
This patch adds several unit tests for GetHiddenItemnumbers and fixes the POD for it.
It also wraps the tests for rollback, modernizes and adds a license text to it.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Tue, 10 Sep 2013 20:19:58 +0000 (16:19 -0400)]
Bug 10872 - C4::Items GetHiddenItems fix and optimization
There should be a:
"require YAML;"
or
"use YAML qw/Load/;"
as the GetHiddenItems routine has a reference to YAML::Load.
This was discovered while adding a GetHiddenItems() call into
opac/opac-MARCdetail.pl. I believe this problem dates back to
bug 6488 or bug 5984.
I also added an optimization to GetHiddenItems to prevent
processing if there is nothing in the system preference. Test
by searching for a biblio which has some or all of its items
hidden.
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Maybe
return () unless $yaml =~ /\S/;
or
return () if $yaml =~ /^\s*$/;
would have been easier to read.
Mark Tompsett [Fri, 12 Jul 2013 03:13:42 +0000 (23:13 -0400)]
Bug 10584 - Hide OPAC biblio details if all items are hidden
If there are items for a given biblio number, and they are all
hidden, then biblio needs to be hidden. If the biblio needs to
be hidden, it immediately redirects to a 404.pl page, just as
if the biblionumber does not exist.
Arrays used to represent all the items were relocated and used,
added if they didn't exist. Arrays representing the hidden
items were relocated and used if they existed, added if they
didn't exist.
Upon debugging the opac-MARCdetail.pl modification, it was
discovered the reason getHiddenItems was failing was because
'use YAML qw/Load/;' was not mentioned in C4::Items, and other
libraries were triggering the loading of YAML to compensate
for opac-detail.pl and opac-ISBDdetail.pl files.
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10897: remove test for module that has become DB-dependent
This is an alternative appraoch to fixing this bug; as the
compilation test for C4::ILSDI::Services also resides
in t/db_dependent/ILSDI_Services.t, we don't need t/ILSDI_Services.t
at present.
Kyle M Hall [Mon, 15 Jul 2013 12:41:51 +0000 (08:41 -0400)]
Bug 7639: QA Followup - Fix update description
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With these patches we now have 3 preferences that deal with
fines/fees and lost items:
Replacement price
- On marking lost: WhenLostChargeReplacementFee
- On return: RefundLostItemFeeOnReturn (preexisting)
Overdue fines
- On marking lost: WhenLostForgiveFine
System preferences work according to their description.
Further notes:
- Patches pass all tests and QA script.
- LostItem is changed and needs unit tests.
All occurrences of LostItem have been changed.
- Database update is ok. I had to fix the sysprefs.sql
file that has been recently rewritten and alphabetized.
Paul Poulain [Thu, 21 Mar 2013 10:24:38 +0000 (11:24 +0100)]
Bug 7639: tiny QA follow-up
no need to create a variable just to call to send it as parameter the line after
Signed off by: Alex Hatley <alexh@cctexas.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 23 Oct 2012 12:03:16 +0000 (08:03 -0400)]
Bug 7639 - system preference to forgive fines on lost items - QA Followup
Test Plan:
1) Apply the patch
2) Run updatedatabase.pl
3) Set WhenLostForgiveFine to Forgive & WhenLostChargeReplacementFee to Charge
4) Issue an item to a borrower, then set to lost from catalogue/moredetail.pl
5) Observe the replacement fee has been charged
6) Return the item
7) Observe the charged fee has been forgiven
8) Set WhenLostForgiveFine to Don't Forgive
9) Repeat 4-6
10) Observe the charged fee has not been forgiven
11) Set WhenLostChargeReplacementFee to Don't Charge
12) Repeat 4
13) Observe that a fee was not charged
Signed-off-by: Alex Hatley <alexh@cctexas.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7639: add option to forgive overdue fines when declaring items lost
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Alex Hatley <alexh@cctexas.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Jonathan Druart [Tue, 16 Jul 2013 15:03:05 +0000 (17:03 +0200)]
Bug 10600: add ability to edit new authority record by duplicating existing one
This patch adds simple link that allows one to duplicate an existing
authority.
Test plan:
1/ Go to a detail authority page
2/ Click to the "Duplicate" button
3/ Edit some fields
4/ Save
5/ The new authority is created from the existing one.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. Template change only.
Also compared the original with the duplicated authoritiy
in MARCXML - no unwanted differences found.
Katrin Fischer [Thu, 12 Sep 2013 05:36:24 +0000 (07:36 +0200)]
Bug 10667: Follow up - prevent t/00-load from failing
To test:
- Apply first 2 patches for unit tests and changes to Services.pm
- Turn off mysql
- Run t/00-load.t
- Verify that the test fails.
- Apply this third patch.
- Run t/00-load.t again.
- Verify this time it passes.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work well, no koha-qa errors.
Without third patch and mysql down, test fails,
with third patch it succeed. Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 8 Sep 2013 19:42:04 +0000 (21:42 +0200)]
Bug 10667: Allow authentication with cardnumber for ILS-DI
Test authentication via ILS-DI:
- with userid and password
- with userid and wrong password
- with cardnumber and password
- with cardnumber and wrong password
...
Before the patch only userid will authenticate the patron.
After the patch was applied, userid and cardnumber will work.
To test:
- Run t/db_dependent/ILSDI_Services.t - all tests should pass.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Test:
Enable ISL-DI
access opac with /cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=XXX&password=YYY
With userid/cardnumber & password returns borrowernumber
With userid/cardnumber & wrong password returns PatronNotFound Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 8 Sep 2013 19:34:37 +0000 (21:34 +0200)]
Bug 10667: Add unit tests for ILSDI::Services::AuthenticatePatron
This patch adds unit tests for Authenticate patron.
To test:
- Run perl t/db_dependent/ILSDI_Services.t
- Verify all tests pass
Note: there are some tests marked as TODO.
Rewriting AuthenticatePatron to make cardnumber and userid
work for authenticating a patron will be implemented in the
next patch. Tests related to this are currently showing as
'not ok', but are still passing.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
With both patches applied, all test pass. Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sophie Meynieux [Fri, 2 Aug 2013 13:48:27 +0000 (15:48 +0200)]
Bug 9372: replace carriage return with <br /> in printed HTML files for overdues
For PDF generation, HTML files need explicit <br /> HTML tags. With
this patch, carriage return are replaced by <br /> when letters are
written into HTML files.
Test plan :
- Ensure you've got at least one reader with overdue triggering notice
- Ensure that your notice template got HTML checked
- Run misc/cronjobs/overdue_notices.pl -v -n -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of the letter is all on one line in PDF file
With the patch, PDF file is correctly formated
- remove your reader email
- Run misc/cronjobs/overdue_notices.pl -v -html <dirname>
and misc/cronjobs/printoverdues.sh <dirname>
Without patch, the content of PDF file is all on one line
with the patch, PDF file is correctly formated.
- restore reader email
- run misc/cronjobs/overdue_notice.pl -v -html <dirname>
Verify that the a message has been generated in message_queue table
With or without patch, the message is the same
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10513: (follow-up) allow for multiline checkin alerts/messages
This patch turns the form input for the checkin message to
a text area and uses the html_line_break Template Toolkit filter
to display it.
To test:
[1] Create or edit an item type. Note that the checkin message
field is a text area.
[2] Enter a checkin message with at least one line break.
[3] In the item types administration page, note that the checkin
message is displayed with the line break.
[4] Return an item of the item type modified in step 1. Verify
that the displayed checkin message includes the line break.
Magnus Enger [Thu, 27 Jun 2013 20:22:18 +0000 (22:22 +0200)]
Bug 10513: display a warning/message when returning a chosen item type
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Katrin Fischer [Sat, 7 Sep 2013 23:03:35 +0000 (01:03 +0200)]
Bug 10841: Make edit/delete item context links in cataloguing translatable
HTML created with Javascript is not translatable the way HTML is
normally translated. _() syntax has to be used to have strings
translatable.
To test:
- Edit items for a record with multiple items
- Click somewhere in the items table
- Verify the links for editing and deleting items show up and work correctly
- Apply patch
- Verify the links still show the same behaviour
Bonus:
- Run 'perl translate update <languagecode>' in misc/translator
- Verify that Edit item and Delete item show up in the po file, translate them
- Install updated po files running 'perl translate install <languagecode>'
- Verify links show up translated and work correctly
Patch also fixes capitalization for a couple of error messages - only change
there is: Deleted > deleted.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Owen Leonard [Fri, 19 Jul 2013 13:07:52 +0000 (09:07 -0400)]
Bug 8821: make receive shipment page hide inactive funds like new order form
This patch adapts the fund-handling code from neworderempty.pl
in order to limit the display of funds by default to active ones,
with the option to check a box to display all funds.
This patch also adds "(inactive)" to the display of funds on this and
the neworderempty.tt template because it seemed like that was useful
information.
To test, make sure you have both active and inactive funds.
Start the process of receiving a shipment. The "fund" option
in the receive shipment form should show only active funds.
Checking the "show all" checkbox should allow you to choose
from both active and inactive funds.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Wed, 10 Jul 2013 20:56:13 +0000 (22:56 +0200)]
Bug 10570: Show nonpublic note on check expiration page
The check expiration page in serials only showed the OPAC note,
but it makes sense to also show the nonpublic note here.
This patch adds it.
To test:
- Add a subscription, make sure to enter different notes in
nonpublic note and OPAC note to check for display later on.
- Go to the check expiration page and search for your subscription.
- Check both notes show up correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10650 - export merge-record.inc javascript into a file
Bug 9755 added a refactoring of records merge adding the include
merge-record.inc. This include contains a block "mergejs" containing all
JavaScript code that was in merge.tt.
This patch exports this code into a js file.
Translatable strings contained in this file are in
merge-record-strings.inc.
Test plan :
- Put two records is a list
- Go to this list and check the two records
- Click on "Merge selected"
- Click on next
- Go to second source record
- Click on a repeatable field
=> The field is added to destination record
- Click on a subfield of a field existing in destination record
=> The subfield is added to destination record
- Click on a non repeatable field existing in destination record
=> You get an alert and field is not added
- Click on a subfield of a field not existing in destination record
=> You get an alert and subfield is not added
- Click on Merge
=> Records are merged
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and test plan, no regressions found.
Jonathan Druart [Mon, 27 May 2013 13:56:28 +0000 (15:56 +0200)]
Bug 9618: (follow-up) include link to jQuery only if needed
The jQuery lib is useful only if js code is filled into the
intranetuserjs pref.
Signed-off-by: Campbell Reid-Tait <campbellreidtait@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
- Use Quick spine label creator
- Make sure you have Javascript in your intranetuserjs system
preference
- Validate Javascript effect on screen or check source code
to make sure your code is visible there.
Owen Leonard [Mon, 18 Mar 2013 19:13:09 +0000 (15:13 -0400)]
Bug 9618: Add support for intranetuserjs to labels/spinelabel-print.pl
The template for printing a single spine label is a stripped-down
version of a standard Koha template, but it should include
intranetuserjs and IntranetUserCSS so that libraries can make local
customizations.
This patch updates the page's DOCTYPE to HTML5 and adds the missing
markup for including those preferences. Also added is jQuery, since
there's a good chance local customizations are using jQuery.
To test, make sure there is something in your intranetuserjs and
IntranetUserCSS system preferences. Visit
/cgi-bin/koha/labels/spinelabel-home.pl and submit a barcode. View
source on the spine label output page and confirm that your custom js
and css were included correctly.
Signed-off-by: Campbell Reid-Tait <campbellreidtait@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only change, works nicely.
Fridolyn SOMERS [Tue, 6 Aug 2013 12:21:10 +0000 (14:21 +0200)]
Bug 7469: put focus on 1st field of creation form instead of search box (Acquisition)
When a user creates a new vendor, a new borrower or a new basket
(maybe on others page too, to be listed), a creation form is displayed,
but the focus is still on the search textbox on page top.
It would be probably better to switch the focus to the first field of
the creation form.
This patch adds the focus, for acquisitions module, on first input for
pages with a data creation or modification or pages with only one form
(like Z3950 search).
Test plan :
Go to pages and look where is the focus :
- acqui/basketgroup.pl : focus on "Basket group name:"
- acqui/basketheader.pl : focus on "Basket name:"
- acqui/invoices.tt : focus on "Invoice no:"
- acqui/modordernotes.pl : focus on "Notes:"
- acqui/neworderempty.pl : focus on "Title:"
- acqui/supplier.pl : focus on "Name:"
- acqui/z3950_search.pl : focus on "Title:"
Signed-off-by: Melia Meggs <melia@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The focus choice is relevant and works as described.
[1] In the staff interface, enter nothing in the patron search box
and hit the search button.
[2] Note the errors in the logs concerning an uninitialized $count
variable.
[3] Apply the patch and repeat step 1. Note that this time, no
warnings are logged.
Chris Cormack [Sat, 7 Sep 2013 03:30:56 +0000 (15:30 +1200)]
Bug 10838: Silence warns in members/member.pl
To test
1/ Uncomment the use warnings line
2/ Search for a patron, notice all the warnings
3/ Browse for a patron, notice warnings
4/ Apply patch
5/ Repeat 3 and 4
6/ Notice no errors and the search still works
This depends on the patch for Bug 10835
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, no regressions found.
Magnus Enger [Sat, 31 Aug 2013 13:33:24 +0000 (15:33 +0200)]
Bug 10810 - Fix synopsis for -html option to overdue_notices.pl
The synopsis for the -html option used to be:
-html <filename> Output html to file
but the argument to this option should actually be a directory,
not a filename. This patch fixes the synopsis.
To test:
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that the synopsis is as shown above
- Apply this patch
- Run perldoc misc/cronjobs/overdue_notices.pl
- Check that
- the synopsis asks for a directory, not a filename
- that the description of the -html option further down in the
perldoc now mentions the filename that the HTML file will be
created with.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No koha-qa errors.
If feeded with a filename -html option fails with many messages like
print() on closed filehandle $html_fh at misc/cronjobs/overdue_notices.pl line 384.
Perhaps it could be improved, but that was the old behavior.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves documentation, no negative side effects found.
Mark Tompsett [Sat, 7 Sep 2013 15:25:27 +0000 (11:25 -0400)]
Bug 10840: restore OPACResultsSidebar in opac-facets.inc
Bug 10405 rightly added id's to items, but inadvertently removed
[% OPACResultsSidebar %] from the opac-facets.inc file. This
bug rectifies that problem.
Test Plan:
Confirm the problem
===================
1) Set OPACResultsSidebar system preference to some text.
2) In the OPAC, search for something
3) The facets will not have the text, though viewing the source, there
is an empty <div id="opacresultssidebar">.
Correct the problem
===================
1) Apply the patch to the master system
2) In the OPAC, search again for something
3) The facets on the left will now have the text from the
OPACResultsSidebar system preference.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Is back! OPACResultsSidebar is back!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Copied test plan from bug report into commit message.
Template only change, works as expected.
Bug 10792: fix sorting of funds table on acquisitions home page
This patch introduces a DataTables sorting plugin, title-numeric,
for sorting cells based on a decimal number embedded in a span title
attribute. This allows currency amounts to be formatted properly
for display without having to writing a sorting plugin that's
super-smart about removing the formatting, particularly for locales
that use a comma as the decimal mark.
[1] Ensure that there is at least one active budget and at least
one inactive one.
[2] Go to the acquisitions home page. Note that changing the sort order
on the amount, ordered, spent, or avail columns results in incorrect
sorting that is either ASCII-betical or which ignores any component
of large numbers that occur after the thousands separator.
[3] Apply the patch.
[4] Verify that the sorting now works correctly and that no JavaScript
errors appear in the JS debug console of your choice.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Sorting now works correctly, for active and inactive funds.
Passes all tests and QA script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10802: make Debian package install history.txt
While bug 8911 fixed a problem regarding history.txt, a proper fix for
packages was missing.
This patch does three things:
- Adds docs/history.txt to debian/koha-common.docs so it gets installed.
- Moves the line installing the release notes from debian/koha-common.install
to debian/koha-common.docs.
- Adds an override_dh_compress entry in debian/rules that excludes
history.txt from the dh_compress routine [1]
To test:
- Take a picture of how /usr/share/doc/koha-common looks.
- Apply the patch and build a package.
- Upgrade and/or install using your package.
- Look for the contents of the /usr/share/doc/koha-common, it should
look the same, but history.txt must be there.
- More > About Koha > Koha Timeline should show the history lines.
[1] As 'man dh_compress' says, it is needed as every file considered for
the doc dir that is plain text and is more than 4k size will be
gzipped unless stated otherwise. We need it uncompressed for about.pl.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch implements some of the suggestions made
by Owen Leonard and brings the form closer in line
with other popup forms. In particular:
- sets dimensions for the popup so that clicking on the
link is more likely to open a new browser window, not
a tab.
- ensures that the vendor search form is always visible
- adds a cancel link to make it more clear to library
staff that they can abort the process.
- tweaks markup to better match the patron guarantor
popup search form
Julian Maurice [Thu, 13 Jun 2013 12:44:11 +0000 (12:44 +0000)]
Bug 5349: Add unit tests for TransferOrder
Signed-off-by: sonia <koha@univ-lyon3.fr> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signing off on this because a following patch fixes the test to use
transactions
Julian Maurice [Fri, 6 Apr 2012 14:57:12 +0000 (16:57 +0200)]
Bug 5349: add ability to transfer order lines from one basket to another
On basket.pl and parcel.pl there is a 'Transfer' link which allow you to
transfer order lines from a basket to another.
The link leads to a new page which allow you to search for a bookseller,
then display this bookseller's baskets. Then you can pick a basket and
the transfer will be done.
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: sonia <koha@univ-lyon3.fr> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Melia Meggs <melia@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
If you click the button directly, the default framework is still used.
If you use the split button functionality to select another framework,
this framework will be used for the imported record.
Bug 10678 - Allow framework selection when creating from Z39.50
If we are creating a new record, we are forced to use the default framework
and then change it after we have the cataloguing form filled. This patch
adds the option to choose (from a splitted button dropdown) which framework
to use.
To test:
- Apply the patch.
- Go to More > Cataloguing
- Check there's a nice split button that says "New from Z39.50"
a) Click the button, the usual Z39.50 search popup should appear and work as expected
(check the URL parameters and see frameworkcode= has no value
b) Click on the dropdown arrow, choose a framework and the usual Z39.50 search popup should
appear, this time frameworkcode= should have the chosen value.
Edit: fixed a small bug that prevented the default framework to be called. Thanks Owen for testing.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Melia Meggs <melia@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Notes on second patch.
Bug 10640: give ModBookseller() an explicit return value.
Before, ModBookseller always returns undef. This patch modifies it in
order to be more explicit.
Now it returns :
1 -> If a modification has been done
0E0 -> If the given ID doesn't exist
undef -> If no ID given
It also fixes one of the tests which didn't pass before
in t/db_dependent/Bookseller.t
To Test:
prove t/db_dependent/Bookseller.t
Bookseller.t .. 1/54
[Some warnings about uninitialized values]
t/db_dependent/Bookseller.t .. ok
All tests successful.
Files=1, Tests=54, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.46 cusr 0.04 csys = 0.53 CPU)
Result: PASS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Change is logical and passes new and old tests.
Fixed the author line to have Kenza's correct email address.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Logical change and makes another test pass :)
Fridolyn SOMERS [Tue, 13 Aug 2013 12:55:32 +0000 (14:55 +0200)]
Bug 10718: fix items with no checkouts report
Bug 8124 has commented the option to download results items with no
checkouts report into a file. But the perl code of this page uses
the export into a file has default behavior since the input "output"
is no more present. The consequence is that there are never results
in page.
This patch removes the code concerning file output from template and perl.
Such a feature exists in guided reports.
Test plan :
Play with cgi-bin/koha/reports/catalogue_out.pl form and see if you get results
Bug 10718 - select user branch as default
In cgi-bin/koha/reports/catalogue_out.pl report, select in library filter the user logged-in.
Test plan :
- Log into intranet with a normal user
- Got to "Items with no checkouts" reports
=> Your branch is selected
- Run report
=> You see "Filtered on : Branch = <your branch>"
- Come back to report
- Select "Any library"
- Run report
=> You do not see "Filtered on : Branch"
Bug 10718 - items with no checkouts report permission is execute_reports
This report only executes SQL to change reports/catalogue_out.pl permissions from all reports subpermissions to reports/execute_reports.
Test plan :
Test you can access and run this report with only execute_reports subpermission into reports permission.
Bug 10718 - redefine limit input
In reports/catalogue_out.pl form, the limit input is by defaut none.
So by default the report queries all the catalogue.
This may take a very long time (fall into timeout) and since now the results are displayed in page, the page may be huge.
This patch modifies limit input to removes the "none" option.
Also reduces the number of options (same options as guided reports results per page).
Test plan:
- Go to reports/catalogue_out.pl
=> first value "10" is selected
- Launch report
=> You see "Filtered on: limit = 10"
Bug 10718 - perltidy on reports/catalogue_out.pl
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested all of these things, all ok - squashed patch for neatness.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Fixed a tab in one of the comments.
Improves script, but more work needed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Wed, 4 Sep 2013 10:18:11 +0000 (11:18 +0100)]
Bug 10817: return hold items info in SIP Patron Info Response
When requested by the summary flags the sipserver
should return in the patron info response barcodes of
the relevant titles.
For available holds this is the barcode of the captured items.
For unavailable holds ( i.e. current unsatisfied holds ),
we need to send a barcode so that the unit can use this to
request the title info. The barcode could be any one
belonging to the title.
This patch also corrects the erroneous return of empty items
in the patron information response. If the unit supplies a
range 1 - 100 unless the title has a hundred or more copies the
unit expects all copies. The server was erroneously stuffing
the returned arrays with null copies so that all summary requests
returned 100 copies (mainly without barcodes)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
Using the test script provided on the bug report, but changed it
to match sip user and patron existing in my database.
Before applying the patch the SIP responses show the behaviour
pointed out above regarding the 100 items. After applying the
patch and restarting the SIP server responses are much more clean
not returning empty IDs.
64 Patron information response
AS = hold items
hold items count is correct.
AS contains barcodes of waiting holds.
Before patch, all AS were empty.
AT = overdue items
overdue items count is correct.
AT contains barcodes of overdue items.
AU = charged items
charged items count is correct.
AU contains barcodes of charged items.
AV = fine items
Judging from behaviour seen and comment in
Patrons.pm currently not implemented.
BU = recall items
Recalls are not implemented in Koha yet.
CD = unavailable hold items
unavailable items count is correct.
CD contains barcode for item level holds and is empty
for title level holds where no item can be determined.
Before patch, all CD were empty.
Bug 10564 - use OPACURLOpenInNewWindow in UNIMARCslim2OPACResults.xsl
When using UNIMARC XSLT for OPAC detail page, if record has an 856$u,
its content is displayed as a link. The syspref OPACURLOpenInNewWindow
adds the option of opening in a new window (attribute target="_blank").
856$u is also used in UNIMARC results XSLT but the use of
OPACURLOpenInNewWindow syspref is missing. It exists for MARC21.
This patch adds the use of OPACURLOpenInNewWindow in UNIMARCslim2OPACResults.xsl.
Test plan :
- In a UNIMARC catalog, enable XSLT for OPAC results page
- Create a record with a link in 856$u and set second indicator to 0
- Set OPACURLOpenInNewWindow syspref on
- At OPAC, perform a search that contains the record
=> You should see the link : "Click here to access online"
- click on it
=> You shoud get to a new window (or tab depending on your browser configuration)
- Set OPACURLOpenInNewWindow syspref off
- re-perform the search
- click on the link
=> You shoud stay in same window
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, no koha-qa errors
Tested following plan after applying patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
XSLT change only, works as described.
To test: Catalog 856$u and $a, 2nd indicator = 0.
Janusz Kaczmarek [Fri, 24 May 2013 11:38:10 +0000 (14:38 +0300)]
Bug 10331 - Little errors in unimarc_field_4XX.pl (punctuation)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Copying the test plan from the bug report:
A.
1) have $a active in one of the linking fields (like 461, 463, etc.).
2) have a biblio record with the field 700 $a, $b, $f filled up
3) go to cataloguing -> field 4XX of your choice, use the plugin to
fetch data from biblio rec. mentioned in 2)
4) see the punctuation in $a -- it will be wrong (no closing bracket)
B.
1) have $a active in one of the linking fields (like 461, 463, etc.).
2) have a biblio record with the field 700 $a, $b, $c, $f filled up
3) go to cataloguing -> field 4XX of your choice, use the plugin to
fetch data from biblio rec. mentioned in 2)
4) see the punctuation in $a -- it will be wrong (dash instead of
semicolon between original $c and $f, no closing bracket)
C.
1) have $a active in one of the linking fields (like 461, 463, etc.).
2) have a biblio record with the field 702 $a, $b, $c filled up
3) go to cataloguing -> field 4XX of your choice, use the plugin to
fetch data from biblio rec. mentioned in 2)
4) see the punctuation in $a -- it will be wrong (unnecessary semicolon
after original $c, n.b. lacking space).
D.
1) have $a active in one of the linking fields (like 461, 463, etc.).
2) have a biblio record with the field 712 $a, $b filled up
3) go to cataloguing -> field 4XX of your choice, use the plugin to
fetch data from biblio rec. mentioned in b)
4) see the punctuation in $a -- it will be wrong (unnecessary opening
bracket at the end).
Test plan, all tests and QA script pass.
Thx Bernardo for his testing and explanations!
Bug 9924: (follow-up) ensure that correct error message is displayed
(Apparently) unlike HTML::Template::Pro, Template Toolkit doesn't like
template variables that are entirely numeric -- in conditionals, it
consider them integers, most of which are Perl true.
This patch changes this by setting the error variable to the error
value.
To test:
[1] Run the test plan from the previous patch. In each
case, verify that the error message is specifically applicable
to the test. For example, if you try uplaoading a patron image
that is larger than 500KB, the error message displayed should
specifically say so.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thank you Galen for catching this. Error messages showing up
now are much more specific and according to the error codes given.
I testd uploading a file larger then 500KB and triggered several
error messages giving the error code in the URL:
/cgi-bin/koha/patroncards/manage.pl?card_element=profile&error=201
Owen Leonard [Mon, 25 Mar 2013 16:22:33 +0000 (12:22 -0400)]
Bug 9924 - Simplify and rename patron card creator error message include
The patron card creator error message include uses a non-standard method
for displaying error messages, and is poorly-named.
This patch converts the method of displaying error messages for various
patron card creator options to the standard one ('<div class="dialog
alert">') and renames the include file to make it clear that it relates
only to patron card creator operations.
To test, perform various operations:
- Go to 'manage images' and try to upload a file which exceeds the
500KBfile size limit
- Go to the edit batch page and manually append an error code to the
URL: /cgi-bin/koha/patroncards/edit-batch.pl?op=new&error=403
- Go to one of the manage pages and manually append an error code to the
URL:
/cgi-bin/koha/patroncards/manage.pl?card_element=profile&error=201
Correct display of an error message indicates that the include file is
being found.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan, test suite and QA script.
projects / koha.git / log