Martin Renvoize [Tue, 2 Sep 2014 09:14:03 +0000 (09:14 +0000)]
Bug 12858: Add error handling to Syndetics Index
* Syndetics routines include a statement to check that the returned
content from Syndetics is xml. The get_syndetics_index routine was
missing this check and so when a 'not found' html page was returned
the opac-detail page would take a long time to load whilst xml::simple
attempted to parse the large html document.
Test Plan
1. Enable Syndetics indexes on opac.
2. Head over to an opac-detail page on the opac.
3. Remove the ISBN from the same item in the staff client.
4. Reload the opac-detail page for the item noticeing a much slower
page load.
5. Apply the patch
6. Reload the opac-detail page for the item and note that it now laods
in a reasonable timescale again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 19 Jan 2015 13:48:42 +0000 (13:48 +0000)]
BUG 13596: Prevent utf8mb4 -> utf8 convertion
utf8mb4 is a superset of utf8 and thus is compatible. We should not
force an entire db change upon people who have proactively set utf8mb4
encoding before now.
This patch also removed the deprecated use of ->tables stanza in favour
of the table_info stanza.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 16 Sep 2014 11:15:57 +0000 (13:15 +0200)]
Bug 12669: Centralize the timezone handle into Koha::DateUtils
This patch adds unit tests for the previous changes and centralize the
timezone handle into the Koha::DateUtils module.
Like that the behavior will affect all date manipulations using this
module (should be all dates in Koha).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rolando Isidoro [Fri, 1 Aug 2014 08:42:30 +0000 (09:42 +0100)]
Bug 12669: Use floating timezone when handling dates without hours, minutes and seconds.
Test plan:
1. Create a new serial record or pick an existing one;
2. Add a "New subscription" and set the "First issue publication date"
and "Frequency" values so that the "Planned date" for a given issue
hits a day where a transition to Daylight Saving Time (DST) occurs
ex:. 1979-04-01 in Europe/Lisbon (http://www.timeanddate.com/time/change/portugal/lisbon?year=1979)
... use this website page as a source http://www.timeanddate.com/time/dst/2014.html
to find a suitable transition to DST in your timezone in the current year.
3. From the "Subscription detail" page in Koha for the given record click
the "Serial collection" link on the left side context menu.
Expected result:
Prior to applying the patch the error described in this bug report should occur.
After the patch is applied the "Serial collection" page should load correctly.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 7 Feb 2015 04:04:40 +0000 (17:04 +1300)]
Bug 13679 : Bug in listing overdues
To test
1/ Create some overdues and some issues due in the future
2/ Run the overdues script
3/ Notice item due in the future is in the list
4/ Apply patch
5/ Run script again
6/ Notice in the future not in the list
Signed-off-by: Nick <Nick@quechelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13728: koha-translate -l -a shows po files instead of language codes
This patch corrects the call to 'basename' inside the script so it correctly
shows the language code when asked to list the available languages.
To test:
- On a packages install, run:
$ koha-translate --list --available
=> FAIL: It shows:
am-Ethi-opac-bootstrap.po
ar-Arab-opac-bootstrap.po
az-AZ-opac-bootstrap.po
be-BY-opac-bootstrap.po
ben-opac-bootstrap.po
...
- Apply the patch
- Copy the patched debian/scripts/koha-translate script to your packages setup.
- Run:
$ koha-translate --list --available
=> SUCCESS: It shows:
am-Ethi
ar-Arab
az-AZ
be-BY
ben
...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 25 Sep 2014 14:39:11 +0000 (16:39 +0200)]
Bug 12970: Cancelled orders
Previous patch does modify the code for cancelled orders.
Test plan:
Cancel 1+ orders and verify the prices are correct (i.e. the same as
the non-cancelled orders) and that the prices are formated.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 25 Sep 2014 14:32:01 +0000 (16:32 +0200)]
Bug 12970: Format totals
The total values should be formated too.
Test plan:
1/ Go on the basket page
2/ Using the CurrencyFormat, verify the totals are correctly formated.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 19 Sep 2014 15:09:34 +0000 (17:09 +0200)]
Bug 12970: Use the centralize VAT and prices calculation - basket.pl
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/basket.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Go on the basket page
4/ Apply the patch
5/ Verify you don't see any difference before and after applying the
patch
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédéric Demians [Mon, 12 Jan 2015 11:18:19 +0000 (12:18 +0100)]
Bug 13568 OAI Server doesn't handle properly resumption token
When responding to ListRecords and ListIdentifiers verbs, OAI server doesn't
return proper resumption token. At the end of a result set, OAI server
generates a resumption token even if there isn't anymore records. Consequently,
OAI harverster will send a new request, based on this invalid resumption,
token. OAI Server responds with an empty resultset, which is considered as an
invalid response by most of the harvesters.
TO TEST:
- Find in your DB, a day where a few biblio records have been created. The
number of created biblios must inferior to OAI-PMH:MaxCount.
- Let say this day is 2014-01-09. Send an OAI-PMH request to Koha OAI Server:
This is wrong. No resumptiion token should be sent since there isn't anymore
records to harvest.
- Apply the patch.
- Resend the OAI-PMH request. There is no resumption token at the end of the
result.
- You could test also with ListIdenfiers verb in place of ListRecord.
Signed-off-by: Christophe Brocquet <christophe.brocquet@obspm.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Magnus Enger [Mon, 16 Feb 2015 09:50:17 +0000 (10:50 +0100)]
Bug 13712 - Missing newline in DB update 3.19.00.010
To test:
- Make sure your database is pre 3.19.00.010 (for example by loading in
an older backup)
- Run through the web-based database update (web installer, step 3)
- Verify that updates 3.19.00.010 and 3.19.00.011 are squashed
together on one line
- Apply the patch
- Reset the database and run the web-based database upgrade again
- Verify that the two uupdates are noe displayed on separate lines
(as separate bullet points)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 22 Sep 2014 15:10:10 +0000 (17:10 +0200)]
Bug 12976: Use the centralize VAT and prices calculation - invoice.pl
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/invoice.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Receive the items and create an invoice
4/ Go on the invoice page acqui/invoice.pl?invoiceid=XXX
5/ Verify you don't see any difference before and after applying the
patch on the invoice details table.
Note: The only different you should see is the price formating for
"Total tax exc.". Before this patch "432.10" was displayed "432.1".
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 9 Dec 2014 18:00:02 +0000 (13:00 -0500)]
Bug 7741 [Follow-up] Clear search terms in Z3950 search page
This patch makes a follow-up change and takes as its basis a dependency
on Bug 13218 - usability enhancement for z39.50 search. If we have a
one-column search form it's possible to put the "Clear search form" link
at the bottom of the form rather than in the header, logically
associating it with the grouping of form fields which will be affected.
Doing so also allows us to eliminate all the custom styling which was an
issue for QA.
Other changes made by this patch: Fixing the indentation
error, correcting the case of the link text ("Clear search form" instead
of "Clear Search Form"), and adding "preventDefault()" to the click
handler so that clicking the link doesn't scroll the user back to the
top of the page.
To test, apply the previous patch and this one on top of Bug 13218.
Repeat the test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas Misilo [Wed, 3 Dec 2014 01:15:07 +0000 (20:15 -0500)]
Bug 7741: Added Clearing Capability to the Z39.50 Search fields
Tested in:
/koha/cataloguing/z3950_auth_search.pl
(Home:Authorities:New from Z39.50)
/koha/cataloguing/z3950_search.pl
(Home:Cataloging:New from Z39.50/SRU)
/koha/acqui/z3950_search.pl
(Home:Acquisitions:[Bookshop]:[Basket]:Order from external source)
All three forms can now be cleared. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 5 Feb 2015 17:19:38 +0000 (12:19 -0500)]
Bug 13672 - OPAC locks up browser when browsing items from series link with NoveList and OpacHighlightedWords
It appears that an empty string is sneaking into the list of words
to highlight and that is causing the browser to freak out.
Test Plan:
1) Enable NoveList
2) Enable OpacHighlightedItems
3) Search a title with a series (i.e. The Hunger Games)
4) Click into the record
5) Click on the series to search it
6) Click on a title in the search results
7) If Firefox doesn't crash, it gives the unresponsive script message
8) Apply this patch
9) Repeat steps 3-6
10) Browser doesn't freak our
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
could not confirm the problem, but small change and
highlighting terms on result list and couldn't find any
regressions in highlighting.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Fri, 13 Feb 2015 12:30:56 +0000 (13:30 +0100)]
Bug 13700: Fix item search templates for translation
Since translator rebuild HTML tags with double quotes for attributes
values, use double quotes in english template too and escape them with
backslash.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It works well!!
Test:
1) Intall translation (de-DE, es-ES)
2) to Go to item search, in english, do a search that gives results
3) Switch language, repeat search, result's table does not render
4) Apply patch
5) Install translation again
6) Repeat 3, now results are displayed
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 20 Jan 2015 15:11:24 +0000 (10:11 -0500)]
Bug 13603 - autoBarcode setting hbyymmincr not taking month into account when looking up next increment
The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jeanne Heicher <nppublib@pa.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 9 Jan 2015 15:10:11 +0000 (16:10 +0100)]
Bug 13417: Remove warnings
Without this patch
perl -wc C4/VirtualShelves.pm
failed:
Constant subroutine C4::VirtualShelves::SHELVES_MASTHEAD_MAX redefined
at /usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_COMBO_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_MGRPAGE_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_POPUP_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHARE_INVITATION_EXPIRY_DAYS
redefined at /usr/share/perl/5.20/constant.pm line 156.
Subroutine GetShelves redefined at C4/VirtualShelves.pm line 103.
Subroutine GetAllShelves redefined at C4/VirtualShelves.pm line 159.
Subroutine GetSomeShelfNames redefined at C4/VirtualShelves.pm line 189.
Subroutine GetShelf redefined at C4/VirtualShelves.pm line 230.
Subroutine GetShelfContents redefined at C4/VirtualShelves.pm line 262.
Subroutine AddShelf redefined at C4/VirtualShelves.pm line 315.
Subroutine AddToShelf redefined at C4/VirtualShelves.pm line 353.
Subroutine ModShelf redefined at C4/VirtualShelves.pm line 394.
Subroutine ShelfPossibleAction redefined at C4/VirtualShelves.pm line
454.
Subroutine DelFromShelf redefined at C4/VirtualShelves.pm line 545.
Subroutine DelShelf redefined at C4/VirtualShelves.pm line 589.
Subroutine GetBibliosShelves redefined at C4/VirtualShelves.pm line 603.
Subroutine ShelvesMax redefined at C4/VirtualShelves.pm line 628.
Subroutine HandleDelBorrower redefined at C4/VirtualShelves.pm line 648.
Subroutine AddShare redefined at C4/VirtualShelves.pm line 683.
Subroutine AcceptShare redefined at C4/VirtualShelves.pm line 703.
Subroutine IsSharedList redefined at C4/VirtualShelves.pm line 731.
Subroutine RemoveShare redefined at C4/VirtualShelves.pm line 750.
Subroutine _shelf_count redefined at C4/VirtualShelves.pm line 764.
Subroutine _CheckShelfName redefined at C4/VirtualShelves.pm line 788.
C4/VirtualShelves.pm syntax OK
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 17 Dec 2014 15:27:11 +0000 (16:27 +0100)]
Bug 13417: Limit the permission to delete
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 5 Dec 2014 11:30:08 +0000 (12:30 +0100)]
Bug 13417: Allow staff members to manage public lists
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 12 Nov 2014 19:42:37 +0000 (14:42 -0500)]
Bug 13142 - Change "mobile phone" label back to "other phone"
Labeling a phone number field "mobile phone" eliminates the usefulness
of having the labels "primary" and "secondary." Generic labels let the
user populate the fields according to their importance rather than their
type.
To test I recommend editing a patron record so that the values in the
patron record contain a label matching the table column:
View this patron's information in the various affected templates and
verify that the labels correctly match the data:
- OPAC "your personal details" (opac-memberentry.pl)
- Submit changes to primary, secondary, and other phone via the OPAC.
In the staff client, view the confirmation for those changes.
- Patron details in the staff client (moremember.pl)
- Patron entry/edit in the staff client (memberentrygen.pl)
- Patron duplicate confirmation in the staff client
(you can navigate directly to
/members/moremember.pl?borrowernumber=XXXX&print=brief)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds POD to the new /svc/barcode service, and also implements some
error handling.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 4 Dec 2014 12:48:35 +0000 (07:48 -0500)]
Bug 13545 - Add barcode image generator service
If we add a script to Koha that can be passed a barcode, we will be able
to easily embed item and patron barcodes into html printable slips and
notices. This can be very helpful for librarians, as it means scanning
an image instead of typing in the barcode manually.
This patch adds a barcode image generator that can be passed a barcode
and an optional type ( defaults to Code39, all GD::Barcode types should
work ). This image can be embedded in html slips and notices.
( e.g. <img src="/cgi-bin/koha/svc/barcode?barcode=<<items.barcode>>"></img> )
Test Plan:
1) Apply this patch
2) Browse to /cgi-bin/koha/svc/barcode?barcode=123456789 on your server
3) Note the barcode image
Signed-off-by: Brandon <brandon_h27@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 3 Nov 2014 14:31:27 +0000 (09:31 -0500)]
Bug 13189 - Patron card creator patron search browse by last name broken by extended attributes
The browse by last name letters on the patron search for the patron card
creator doesn't work quite right. If extended patron attributes are
disabled, it works fine, but if they are enabled, they are searched even
when using the browse last name. Thus, if a searchable attribute has a
"D" in it, and one clicks the "D" link for the last name browser, that
patron will show even if he or she has no "D" in his or her hame!
Test Plan:
1) Enable extended patron attributes
2) Add a new searchable patron attribute
3) Create a new patron with the last name "Ace"
4) Add the value "D" to the attribute for this patron
5) Browse to the patron card maker, start a new patron batch
6) Click "Add item(s)" to bring up the patron search
7) Click the letter "D" in the patron search box
8) Note that "Ace" shows in the results list
9) Apply this patch
10) Repeat step 7
11) Note that "Ace" no longer shows in the results list
12) Perform a regular search by putting the letter "D" in the "Name:"
field, and hit the "Search" button
13) Note this time the results *do* have Ace in them
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Well described for a tricky bug. Reproducible. Fixed with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This works as described, no problems or regressions found.
Jonathan Druart [Wed, 26 Nov 2014 14:14:59 +0000 (15:14 +0100)]
Bug 13343: Embed items when send a basket/shelf
When a basket/shelf is downloaded, items are embedded, but not when
sending it by email.
We would expect to get the same file.
Test plan:
On Opac and intranet:
1/ Add records with items to your basket and send it by email.
Verify the file contains items.
2/ Add records with items to a list and send it by email.
Verify the file contains items.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 24 Nov 2014 11:46:43 +0000 (12:46 +0100)]
Bug 13019: [QA Follow-up] Rename new_from_dbic and few typos
Since new_from_dbic is not meant as a public method, this patch adds
a prefix to the name of this internal routine. For the same reason I
removed it from t/Borrower.t.
Removed one use overload-line in Objects (not used).
Resolved a few typos.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 21 Nov 2014 16:40:48 +0000 (11:40 -0500)]
Bug 13019 [QA Followup] - Allow find() and search() to be called as static methods
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 10 Nov 2014 11:55:35 +0000 (12:55 +0100)]
Bug 13019: (follow-up) Remove smartmatch operator
This patch also adds 1 test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 30 Sep 2014 19:05:30 +0000 (15:05 -0400)]
Bug 13019 - Add base classes on which to build Koha objects
The idea behind this is to have a pair of base classes on which to build
our new generation of Koha objects. Koha::Object is a base class, which
in it's most basic form, is to represent a row in a table. For example,
Koha::Borrower inherits from Koha::Object. So too could Koha::Biblio
and Koha::Item for example.
Koha::Objects is to represent a way to fetch and manipulate sets of
objects. For example, Koha::Borrowers has a method to get a
Koha::Borrower object by id and a method to search for an get a list
of Koha::Borrower objects. Right now Koha::Objects has only the
essentials but can easily be extended and those enhancements will be
passed down to all the child classes based on it.
By using these classes as a base, we will add consistency to our
code, allow us to keep our code DRY, reduce bugs, and encapsulate our
database access among other benefits.
Test Plan:
1) Apply this patch
2) prove t/Object.t t/db_dependent/Object.t t/db_dependent/Objects.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 25 Nov 2014 15:16:47 +0000 (10:16 -0500)]
Bug 13335 - Holds and priority display via OPACShowHoldQueueDetails confusing
No matter what the selection of OPACShowHoldQueueDetails is, if it is
enabled it displays a line "Holds and priority:" even if you've opted to
hide one of those!
Test Plan:
1) Apply this patch
2) Test each setting of OPACShowHoldQueueDetails
3) Ensure each setting displays the correct fields ( or lack thereof )
Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 28 Jan 2015 13:31:30 +0000 (08:31 -0500)]
Bug 13636 - Staff search results item status incorrect for holds
Imagine this scenario: we have one record with four items. Two of those
items are checked out, one of those items is a waiting hold, and one of
those items is available. We would expect to see this on the search
results page. Instead, we will see both non-checked out items as
unavailable due to waiting holds.
This is due to a semantic issue GetReserveStatus.
C4::Search::searchResults uses GetReserveStatus to get the reserve
status of each item, but unlike all other calls to the sub, this one
passes in not only itemnumber, but biblionumber.
When no reserve is found for the available item, the subroutine uses the
biblionumber to grab what is essentially an arbitrary reserve to use for
the status. This makes no sense and this functionality should be
entirely removed from the subroutine so regressions like this will be
prevented in the future.
Test Plan:
1) Create one record with 4 items
a) check two of the items out to patrons
b) set one of the items as a waiting hold
c) leave the fourth item as available
2) Run a search where this record will be in the results list
3) Note that the results list 2 items on loan, two unavailable
4) Apply this patch, reload the search results
5) Note that the results list 1 available, 2 on loan, 1 unavailable
Signed-off-by: John Andrews <jandrews@washoecounty.us> Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: This is for the staff search result list!
Works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Removed 'use C4::Context;' because it can lead to introduction
of circular reference in the near future
2) Put fastmmap initialization code into an eval {} block, to catch
various kinds of errors which can still occur during it's init in
some [less usual] Koha setups and/or more unusual circumstances
3) Do not include UID in the sharefile name (it will be constructed
using namespace + database name + database host instead).
Test plan addendum:
s/and UID//
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Tue, 16 Dec 2014 11:48:09 +0000 (12:48 +0100)]
Bug 13431 - Shared FastMmap file causes issues
Koha::Cache package does not take into account that, when using
fastmmap caching variant, mmaped cache file created in /tmp
(typically: /tmp/sharefile-koha-koha), would only be further
accessible to the one given OS user - the one which created it.
In many Koha setups, in the circumstances when various system scripts
are executed by 2+ users with diffrent UIDs (like multi-tenant servers,
for example) this may cause many kinds of issues. Observable symptom
is usually the appearance of the below error when searching, or looking
at MARC Framework pages and a few other places:
Open of share file /tmp/sharefile-koha-koha failed: Permission denied
at /usr/lib/perl5/Cache/FastMmap.pm line 640.
This patch:
- disables initialisation of fastmmap caching subsystem unless it is
explicitly requested by the user (CACHING_SYSTEM=fastmmap)
- disables fastmmap cache usage for command line scripts
(i.e. when GATEWAY_INTERFACE environment variable is not defined)
- adds the database name, host name and an ID of the OS user to the
mmaped file name created in /tmp, to prevent various kinds of
unintentional conflicts and/or permission problems from happening
To test:
1) remove the /tmp/sharefile-koha-* file[s] (if any)
2) do something which would lead to its re-creation (e.g., performing
any search in OPAC should be sufficient to cause that)
3) observe that /tmp/sharefile-koha-koha got created
4) remove it
5) apply patch
6) redo step 2)
7) observe that aforementioned file is no longer created in /tmp
8) set CACHING_SYSTEM environment variable to 'fastmmap'
9) redo step 2), observe that /tmp/sharefile-koha-* file got created
and that it's name now contains hostname, database name and UID
10) ensure that everything still works like it should and that there
are no regressions of any kinds anywhere in the system ;)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 12 Nov 2014 11:24:10 +0000 (12:24 +0100)]
Bug 13240: Remove commented warns
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Verify the digest for DUE and PREDUE work as before.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 5 Feb 2015 14:21:12 +0000 (09:21 -0500)]
Bug 13670 - Patron holds table not loading when holds tab anchor is used
If a link to a patron record ends with #reserves, the holds tab is selected
on page load, but the holds table does not load.
Test Plan:
1) Build your holds queue
2) From the holds queue report, open any patron link
3) Note the patron's reserves do not load
4) Apply this patch
5) Clear your browser cache
6) Repeat step 2
7) Note the holds table now loads
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 14 Nov 2014 15:18:09 +0000 (16:18 +0100)]
Bug 13319: Fix Koha::Acq::Order should set parent_ordernumber
The tests highligh the problem: if the parent_ordernumber attribute is
not set on inserting an order, the object returned by the method does
not contain the value (undef).
Test plan:
Verify the tests are consistent and
prove t/db_dependent/Acquisition/CancelReceipt.t
should return green.
You can also verify that receive partially an order and cancel the
receipt work as expected.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 21 May 2014 18:09:04 +0000 (11:09 -0700)]
Bug 12323 [SIGNED OFF] - Acquisitions search results fixed in order of biblionumber
The acquisitions search is exhibiting the same behavior as bug 11410.
Results are always fixed in order of biblionumber, among other possible
issues ( including the ampersand issue ).
Test Plan:
1) From an open basket, choose "Add to basket"
2) Run a search for "From an existing record"
3) Note the "View MARC" URLs are fixed in order of biblionumber
4) Apply this patch
5) Refresh the page
6) Note the results are no longer fixed in order of biblionumber
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think the code could be a bit tidier, but I think it makes sense to
use buildQuery here. It'll detect CCL, CQL, and PQF queries, as well
as parsing a regular keyword search as one would expect when searching
the catalogue.
It also has the added bonus of performing relevance searching,
so long as QueryAutoTruncation is off, and so long as library staff
avoid using the "*" truncation wildcard (see bug 12430).
While there are simpler ways to fix this acq bug, I think this was
probably the best move, as it adds a bit to the consistency of what
librarians can expect from their search results.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Same result with and without the patch but I agree with the changes.
BuildQuery should be called before SimpleSearch if QP is not used.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 6 Feb 2015 15:19:14 +0000 (16:19 +0100)]
Bug 13675: Do not set aqorders.budget_id to NULL
C4::Acquisition::ModReceiveOrder updates the aqorders with
budget_id=NULL if no budget_id given in parameter.
Actually the same budget_id should be used.
In tests (especially t/db_dependent/Acquisition/TransferOrder.t),
ModReceiveOrder is not called with a budget_id param and set to NULL the
budget_id value.
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t
should return green
Note that this bug should not appear using the interface.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fix makes sense, and running
$ prove t/db_dependent/Acq*
returns all green. koha-qa.pl also likes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 29 Aug 2014 15:26:43 +0000 (17:26 +0200)]
Bug 10900: 2 occurrences more
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 12 May 2014 21:57:51 +0000 (17:57 -0400)]
Bug 10900 - Follow up, since more has been added to master
Booksellers.t and Koha_template_plugin_Branches.t both had
function calls to ::set_userenv added to them. This patch handles
those additions.
TEST PLAN
---------
1) Branch a new git branch
2) prove -v t/db_dependent/Bookseller.t
-- It should work.
3) prove -v t/db_dependent/Koha_template_plugin_Branches.t
-- It should work.
4) Apply only the first patch.
5) Repeat steps 2 and 3.
-- They should both FAIL!
6) Apply the second patch as well.
7) Repeat steps 2 and 3.
-- The should both work.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brandon [Thu, 15 Jan 2015 22:42:52 +0000 (22:42 +0000)]
Bug 10177 - Whitespace is accepted within the password but leading and trailing spaces are not.
Test plan:
1: Go to your patron
2: Go to change username and/or password.
3: Change password to something with spaces in the middle. Notice it is invalid.
4: Apply this patch.
5: Change password again using spaces in the middle. Notice it is accepted.
6: Change password with leading and/or trailing spaces, notice they are not accepted.
Applied bothe patches. Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brandon [Wed, 14 Jan 2015 22:30:01 +0000 (22:30 +0000)]
Bug 10177 - whitespace is a valid password causing pernicious perturbations.
Test plan:
Go to your patron, go to change username and/or password. change
password to whitespace, notice it is accepted, apply this patch,
change password again, to whitespace, notice password is not valid.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Tue, 30 Dec 2014 09:14:15 +0000 (09:14 +0000)]
Bug - 5511 [Followup]: QA Fixes
- Move database update entry to correct spot
- Fix version number in database update
- Fix capitalization in sys pref description
- Fix sequence in sysprefs.sql
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Thu, 11 Dec 2014 13:39:24 +0000 (13:39 +0000)]
Bug - 5511 [Followup]: Missed Instance
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 9 Dec 2014 13:48:29 +0000 (13:48 +0000)]
Bug - 5511 [Followup]: Switched defults
Agree with Chris that the defualt should maintain the higher security
and not reduce it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Amit Gupta [Tue, 8 Oct 2013 04:06:59 +0000 (09:36 +0530)]
Bug - 5511: Added new system preference: SessionRestrictionByIP
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Amit Gupta [Tue, 8 Oct 2013 04:03:54 +0000 (09:33 +0530)]
Bug - 5511: Check for Change in Remote IP address for Session Security. Disable when remote ip address changes frequently.
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 18 Nov 2014 09:20:56 +0000 (10:20 +0100)]
Bug 13007: Special case budgetid == ''
In this special case (the suggestion is linked to "all funds"), the
budgetid value should be NULL in DB.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes old and new tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 14:16:23 +0000 (16:16 +0200)]
Bug 13007: Add a foreign key for suggestions.budgetid
The DB field suggestions.budgetid should be linked to
aqbudgets.budget_id.
If the fund is removed, this column should be set to NULL.
Test plan:
1/ Using your SQL CLI (or equivalent), create or update 1+ suggestions and
set "0" in the budgetid field (or a nonexistent budget id).
2/ Execute the updatedabase script.
3/ Verify that your suggestion is unlinked to the nonexistent fund.
4/ Verify the constraint has correctly been added (show create table
suggestions).
5/ Check that this change does not affect the behavior on adding a
suggestion (linked to a fund or not).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Dec 2014 10:12:13 +0000 (11:12 +0100)]
Bug 12944: Fix regression on translating
This patch fixes the translation for the "Remove" button.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested:
- acq history search with different searches
- patron lists patron search
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 29 Oct 2014 14:53:07 +0000 (10:53 -0400)]
Bug 12944 [Patron lists follow-up] There is no way to search orders by creator
This bug modifies not just the order search form but also the patron
lists feature, making use of the new script for building a patron
autocomplete form. However, the test plan does not specify that the
patron lists form be tested as well, and it doesn't work.
This patch corrects a minor flaw which broke the patron search
autocomplete when adding patrons to a patron list.
To test, create a new patron list if necessary. Click the "add patrons"
button to add patrons to the list. In the patron search form type a
partial patron name. You should get an autocomplete dropdown of existing
patrons. Selecting one should work correctly.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 17 Sep 2014 15:13:00 +0000 (17:13 +0200)]
Bug 12944: Search orders by basket creator
This patch adds the ability to search orders using the basket creator.
Test plan:
- go on the order advanced search form (acqui/histsearch.pl)
- use the autocomplete input to search patrons
- launch the search and verify the results are consistent with the
values you have filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 17 Sep 2014 15:12:42 +0000 (17:12 +0200)]
Bug 12944: Refactor the patron autocomplete
The patron list feature uses an autocomplete field to search patron.
This will be reused in the next patch.
This patch should not introduce any behavior change.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12944 [QA Followup] - Rename patrons.pl to patrons.js
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 19 Nov 2014 18:28:12 +0000 (13:28 -0500)]
Bug 11954 - Clean up currency default files
It makes no sense to have TRUNCATE or foreign key checks.
TEST PLAN
---------
1) Back up your database
2) in an mysql client:
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=1;
QUIT
-- These should all work without problem.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The holds ratio report ignores ordered items. This could cause a library
to inadvertently order more copies of a title than they actually need.
An option should be added to count ordered items ( i.e. any negative
notforloan value ).
Test Plan:
1) Apply this patch
2) Create a record with two items, one regular, one ordered.
3) Place 3 holds on the item
4) Run the reserve ratios report, by default you should see this record
5) Check the new 'include ordered' checkbox, rerun the report
6) Note that record is no longer displayed
Signed-off-by: Heather Braum <hbraum@nekls.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 5 Nov 2014 11:41:13 +0000 (12:41 +0100)]
Bug 13201: GetSuggestion takes suggestionid
Having $ordernumber as the parameter in a function which is
handling suggestions and it is used as a suggestion id is
confusing to the coder and person trying to read the code.
This patch corrects the confusion.
REVISED TEST PLAN
-----------------
1) perldoc C4::Suggestions
-- notice it says ordernumber for the GetSuggestions example.
2) Ensure you have CPL in your branches table.
3) prove -v t/db_dependent/Suggestions.t
-- if you have more than 8 itemtypes in your database, two
tests at the end will fail, but that is not relevant to
the modified GetSuggestions code.
4) apply patch
5) perldoc C4::Suggestions
-- notice it is corrected now.
6) prove -v t/db_dependent/Suggestions.t
-- it should run with the same results as in step 3.
That is, if you have 8 itemtypes, all pass, otherwise
those two tests fail.
7) run koha qa test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch will add DDC classifications, divided with | below the subjects
in the OPAC and staff detail pages.
To test:
- catalogue a record with one or mulitple 082$a subfields
- verify the classifications are displayed in OPAC and staff detail page
- Add following CSS to OpacUserCSS or IntranetUserCSS:
.results_summary.ddc {
display:none;
}
- Verify the DDC classifications are now no longer displayed
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Test plan ok. Repetions of $a subfield are separated by a space, which seems
correct. I'm not sure whether other subfield than $a should be displayed on
intranet. Whatever, this could be added later.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 8 Jul 2014 14:30:00 +0000 (10:30 -0400)]
Bug 12543 - Add userid as matchpoint for "Import patrons" tool
The a patron's userid should be a matchpoint in the same manner as
cardnumber. Though not enforced as a unique key by the database yet
( pending bug 1861 ), this field is effectively unique as uniqueness
is enforced by Koha itself.
Test Plan:
1) Apply this patch
2) Browse to tools/import_borrowers.pl
3) Download the starter CSV file
4) Edit the csv file to include 1 or more patrons
* Make sure to leave the borrowernumber field empty
* Make sure the userid field matches the patrons you wish to overwrite
5) From import_borrowers.pl, upload your file
* Set "Field to use for record matching" to "Username"
* Set "If matching record is already in the borrowers table" to "Overwrite the existing one with this"
6) Click "Import"
7) Verify the patrons in your file have been updated in Koha
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Do exactly what's announced. This may help.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mirko Tietgen [Sun, 7 Dec 2014 17:39:51 +0000 (18:39 +0100)]
Bug 13404 - More System information about GRS1 vs DOM settings
System information indicates missing <zebra_bib_index_mode> and <zebra_auth_index_mode> entries in koha-conf.xml.
This patch
- adds warnings about a possible mismatch between these settings and the actual setup
- adds info about the actual setup/what values to use for <zebra_bib_index_mode> and <zebra_auth_index_mode> if they are not set.
The assumption is that a path including 'zebra-*-dom.cfg' in the respective section indicates a DOM setup.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Fri, 5 Dec 2014 14:50:05 +0000 (15:50 +0100)]
Bug 13401 - sort branches alphabetically in admin/authorised_values.pl
This patch adds a sort of branches alphabetically by name in authorised values administration, like in many other pages.
Also replaces var $branch (too ambigus) by $branchcode.
Test plan :
- Create 2 branches : code=AAA,name=Zbranch and code=ZZZ,name=Abranch
- Create a new authorized value : admin/authorised_values.pl
- Look at "Libraries limitation" :
=> Without patch branches are sorted by code : Zbranch then Abranch
=> Without patch branches are sorted by name : Abranch then Zbranch
- Select a branch and save
- Re-edit
=> Check the same branch is selected
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 26 Jan 2015 09:28:27 +0000 (10:28 +0100)]
Bug 13352: On editing, prices should not be formatted
Bug 12979 refactored the way to display prices.
The price format configuration was duplicated everywhere it was used.
All calls looks good except the one in admin/aqbudgetperiods.pl
In this one, the prices are formatted for an edition field (input).
This means the input is incorrectly filled even if the user does not
update the field.
At the end, maybe should we manage formatted prices everywhere, even in
inputs, but it's not in the scope of this bug.
Technically, a new subroutine format_for_editing is added to the
Koha::Number::Price module.
It should be called everywhere a price is displayed in an input field.
At the moment, it only does a sprintf("%.2f"), but it is a first step to
let the number of decimals to display configurable.
To test:
1/ Verify the issue described is fixed (editing a budget with a total
amount > 1000 (With CurrencyFormat is US or FR).
2/ Verify you can edit a fund with a total amount > 1000
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Wed, 14 Jan 2015 16:00:17 +0000 (17:00 +0100)]
Bug 13562: Fix item search on item MARC subfields
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13602 - Username/password already exists when editing borrower attributes and messaging preferences
When editing a Patron's messaging preferences or borrower attributes, one cannot
save changes because 'userid' is not given as a parameter.
It shouldn't, but the
Check_Userid($newdata{'userid'},$borrowernumber) -check must have it.
REPLICATE THE ISSUE:
1. Find a Borrower.
2. Go to the details-tab.
3. Under "Patron messaging preferences" click edit to edit just the messaging
preferences.
4. Just save, no need to make any modifications.
5. Observe the error "Username/password already exists"
This happens to all/most of the sub-forms in the Borrower's Details-view.
AFTER THIS PATCH:
Check_Userid() get the $userid from the new parameters, or if not present, from
the koha.borrowers-table.
TEST FOR REGRESSION:
1. Edit a borrower normally. Notice no errors.
2. Edit a sub-form (Alternate address/Patron messaging preferences). Notice no
errors.
DISCLAIMER: You are free to steal/rip/modify/hack this patch to your soul's
extent without my permission. As long as it makes to Koha I am happy.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 28 Jan 2015 17:24:45 +0000 (12:24 -0500)]
Bug 13638 - Batch patron modification tool missing option to switch language
The batch patron modification tool's template was created without the
footer include at the bottom. Without the footer include the language
toolbar will not be displayed.
All page templates should include the global footer include:
[% INCLUDE 'intranet-bottom.inc' %]
To test:
- Install at least a second language
- Enable at least 2 languages (language system preference)
- Go to tools > Batch patron modification
- Verify that at the bottom of the page the language chooser is shown
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I am not able to reproduce this issue after this patch
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 19 Jan 2015 14:05:03 +0000 (15:05 +0100)]
Bug 13418: [QA Follow-up] Use unshift instead of push
Some SQL parameters are added to the wrong side of the list.
This effectively clears all private lists from view :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 8 Dec 2014 15:31:06 +0000 (16:31 +0100)]
Bug 13418: Clean C4::VirtualShelves::Page a bit
I tried to reuse this package for a new development, I did not manage.
It's a really hard to read and to understand.
Here my first try, this patch only remove the call to _shelf_count in
the GetShelves subroutine.
Someone might want to get this value for another reason and from
somewhere else.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 29 Dec 2014 23:04:53 +0000 (00:04 +0100)]
Bug 13450 - Title and breadcrumb of Patron form can look weird in translations
This patch moves the patron category name or category type at the end of title and breadcrumb for better translatability.
Note: It does not change anything in functionallity, it only changes display of strings.
To test:
Apply patch
Search a patron and edit it in all possible ways: 'Edit' button on top of details page, 'Edit' links in details page, 'Edit' links in search result table if multiple patrons are found)
Duplicate a patron
Create a new patron
Make sure that title and breadcrumb appear in a meaningful way with pattern similar to the following:
Modify patron Hansli Meier (Juvenile)
(Missing </div> added)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Mon, 17 Nov 2014 02:59:49 +0000 (13:59 +1100)]
Bug 13262 - Add parameters to XSLT Handler transform method
This patch adds an optional hashref argument to the XSLT_Handler
transform() method. It allows you to send key => value pairs
parameters to the XML::LibXSLT object, which you can reference
in a XSLT via <xsl:param name="XXX" />.
The parameter value is evaluated as an XPath query, so you can only
pass quoted strings (i.e. "'test'") or numbers. Otherwise, the
XSLT engine will interpret it as a Xpath query and will run it
on the XML that you're transforming.
The most common use case is sending strings to a XSLT. In my case,
this is an OAI-PMH identifier that comes in a OAI response but not
the actual metadata. See the following link from the official POD:
http://search.cpan.org/~shlomif/XML-LibXSLT-1.92/LibXSLT.pm#Parameters
_TEST PLAN_
1) Run "perl t/db_dependent/XSLT_Handler.t". If all tests pass,
you should be free to sign off. Feel free to inspect the last
test in XSLT_Handler.t and the XSL in test04.xsl to see how it
works.
If you really want to be thorough, you could write your own test
cases using mine as an example.
Alternatively, you could go into C4::XSLT, and try to pass a
value to a parameter in the search results or the detail page,
but that might be a bit over the top.
It's a pretty simple patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 18 Jul 2014 10:34:07 +0000 (12:34 +0200)]
Bug 12601: Add a foreign key for aqorders.budget_id
When creating an order, the fund value is mandatory but the DB structure
does not show this constraint.
The aqorders.budget_id field should be linked to aqbudgets.budget_id.
The updatedatabase.pl (entry 3.01.00.077) commented this constraint,
certainly for a retro compatibility reason.
Actually I found some cases (in production) where aqorders.budget_id is
set to "0". To add this constraint, we should add a temporary fund to
linked orphan orders.
Test plan:
0/ Verify it is not possible to create an order not linked to a fund via
the Koha interface.
1/ Using your SQL CLI (or equivalent), create or update 1+ orders and set
"0" in the budget_id field.
2/ Execute the updatedabase script.
3/ Verify that your order is linked to a new fund (which is linked to a
new budget).
4/ Verify the constraint has correctly been added (show create table
aqorders).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log