Jonathan Druart [Tue, 14 Feb 2017 15:22:40 +0000 (15:22 +0000)]
Bug 18094: Only search in searchable patron attributes if searching in standard fields
Test plan:
- Add a new patron attrbute and mark it searchable
- Populate a new patron with 'potato' in that field
- Add/edit another patron to have email potato@invalidemail.com'
- Perform a patron search with query 'potato' (in standard fields)
=> Both patrons are returned
- Perform a patron search with filters 'Email' and query 'potato'
=> Only 1 patron is returned and you are redirected to the patron detail page.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 14 Feb 2017 15:19:25 +0000 (16:19 +0100)]
Bug 18094: Add tests to highlight the problem
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Mar 2017 08:17:02 +0000 (09:17 +0100)]
Bug 18215: Fix another tls warning
Resolve warning:
Use of uninitialized value in string eq at C4/Installer.pm line 79.
Test plan:
Add a trivial .sql file in atomicupdate (comment is sufficient).
Run updatedatabase.pl
Without the patch you have the warning.
Apply the patch and repeat (no warning).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 11 Mar 2017 18:17:37 +0000 (19:17 +0100)]
Bug 18246: Patron card creator: Unit not always displays properly in layouts
To reproduce:
1) Create a new layout
2) Select an unit in "Units selection"
3) Save
4) Edit layout again
5) Select other unit, e.g. 'SI Centimeter'
6) Save
7) Repeat
8) Edit again
Error: Latest unit seems to stick and can no longer be changed, because
in units drop down, multiple untis are marked as selected.
To test:
1) Apply patch
2) Repeat steps above, verify that value for units always display as expected.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
1. Make a new layout
2. Tick "Print card number as barcode"
3. Change 'Barcode Type' to anything other than Code39
4. Save
5. Edit it again
6. Its back to Code39
To test:
1. Apply patch
2. Repeat steps above
3. Verify that 'Barcode type' is selected as expected
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=18063
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 17169: (QA followup) Add NORMARC and UNIMARC definitions for CCODE
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Nick Clemens [Tue, 11 Oct 2016 09:01:12 +0000 (09:01 +0000)]
Bug 17169: Add a facet for ccode fields to ElasticSearch
To test:
1 - Apply patch
2 - Backup your db
3 - Drop and create a new db to ensure your mappings are refreshed from
the patch
4 - add some titles with items with collection codes
5 - search and see collection code facets
6 - sign off
Work to be done:
1 - Replace codes with descriptions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 13 Mar 2017 04:11:54 +0000 (01:11 -0300)]
Bug 18256: Koha::Items - Remove GetItemsCount
C4::Items::GetItemsCount can be replaced with Koha::Biblio->items->count
Test plan:
Create a bibliographic record with items attached
Try to delete the record from a basket (acquisition module), the detail
page and the batch item deletion tool.
=> You should not be able to delete it.
Remove the items and then try again to delete the record
=> Now you must be able to delete it.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Nick Clemens [Tue, 14 Mar 2017 14:16:09 +0000 (14:16 +0000)]
Bug 18264 - Course reserves - use itemnumber for editing existing reserve items
This patch alters the crouse reserves module to use itemnumber as the
lookup method for existing reserves as opposed to barcode
To test:
1 - Apply patch
2 - Add some items to a course reserves - all should work as expected
3 - Delete the barcode for an item on reserve
4 - Note the edit link still resolves to the correct item
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
BUG 8010: Correct a few syntax errors, and moved tests
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a new syspref to Load history to the next user
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
Tested 3 patches together, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Nicolas Legrand [Wed, 22 Feb 2017 09:11:18 +0000 (10:11 +0100)]
Bug 18150 - CanItemBeReserved doesn't work with (IndependentBranches AND ! canreservefromotherbranches)
The variable $item used to be a hash, but at the end of the function,
it's a Koha object. As $item->{homebranch} doesn't yield anything and
should be $item->homebranch. It prevents people using different
branches without holds between branches from placing a hold on an item
they should be able to place hold on.
Test plan:
1. Before patch
a. with IndependantBranches off
b. try to place hold on an item you should be able to place hold on
c. it should work
d. put IndependantBranches on and canreservefromotherbranches off
e. shouldn't work
2. after patches redo steps from (1) and everything should be working
fine.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: Item is fetched twice, it's not necessary. But out of the scope of
this patch.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
David Gustafsson [Mon, 20 Mar 2017 14:13:13 +0000 (15:13 +0100)]
Bug 18305 - jquery.fixFloat.js breaks advanced MARC editor
Remove use of ECMASCRIPT 2015 default parameter syntax in
jquery.fixFloat.js to be compatible
with a wider range of browser versions.
Test plan:
1. Usa a not so modern browser, for example Chrome/Chromium < 49, any version of IE
besides Edge, Opera, or Firefox < 15.0.
2. Edit a bibliographic record in staff client and try switching to
advanced MARC editor (check console, no errors should appear).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 9 Mar 2017 19:58:17 +0000 (16:58 -0300)]
Bug 18242: [SOLUTION 2]Handle correctly move to old_issues
The table old_issues has a primary key defined on the issue_id column.
This issue_id comes from the issues table when an item is checked in.
In some case the value of issue_id already exists in the table
Basically this happens when an item is returned and mysqld is restarted:
The auto increment value for issues.issue_id will be reset to
MAX(issue_id)+1 (which is the value of the last entry of old_issues).
See also the description of bug 18003 for more informations.
In this solution the change is done at code level instead of DB
structure: If old_issues.issue_id already exists before moving from
the issues table, the issue_id is updated (not on cascade for
accountlines.issue_id, should it?) before the move.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 9 Mar 2017 19:41:31 +0000 (16:41 -0300)]
Bug 18242: [SOLUTION 2]Add tests
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 16 Mar 2017 18:20:10 +0000 (15:20 -0300)]
Bug 18284: (bug 17196 follow-up) Move biblio metadata when a biblio is deleted
There is a deletedbiblio_metadata table but it is not populated when a
biblio is deleted. Since we have a ON DELETE constraint on
biblio_metadata.biblionumber, the row is deleted when the biblio entry
is deleted => data lost!
Test plan:
- Create a biblio
- Delete it
=> Without this patch the deletedbiblio_metadata table is not populated
with the biblio_metadata row related to the biblio
=> With this patch applied you should see that the row has been moved.
Followed test plan, behaves as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.coml>
root@koha_ci_1:/home/koha/Koha# KOHA_CONF=$KOHA_CONF perl t/Koha_Template_Plugin_Koha.t
1..3
ok 1 - use Koha::Template::Plugin::Koha;
ok 2
1..2
ok 1 - Correct development version
ok 2 - Correct maintenance version
ok 3 - Koha::Template::Plugin::Koha::Version tests
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Mon, 13 Mar 2017 23:24:42 +0000 (12:24 +1300)]
Bug 18243: 16034 follow-up: Conditionally test Koha::ExternalContent::* modules loading
To test:
1 - Make sure you don't have WebService::ILS installed
2 - prove t/00-load.t
3 - You should get a failure to load module and tests are skipped
4 - Apply patch
5 - prove t/00-load.t
6 - Module is not loaded, test are skipped
Optional:
7 - Install WebService::ILS
5 - prove t/00-load.t
6 - Module is loaded, test passes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Thu, 2 Mar 2017 00:31:14 +0000 (13:31 +1300)]
Bug 18243: 16034 follow-up: better handling of absence of WebService::ILS::OverDrive::Patron at testing
To test:
1 - Make sure you don't have WebService::ILS::OverDrive::Patron
installed
2 - prove t/Koha_ExternalContent_OverDrive.t
3 - You should get a failure to load module and tests are skipped
4 - Apply patch
5 - prove t/Koha_ExternalContent_OverDrive.t
6 - Module is not loaded, test are skipped
Fixed small typo 'cannot filnd' -> 'cannot find' Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 15 Mar 2017 17:52:49 +0000 (14:52 -0300)]
Bug 18275: Do not rely on CGI param userid to log a user in if auth is not required
From opac/opac-memberentry.pl, authnotrequired is set.
That means a patron can access the page without being logged in. It is
used on this page for the self registration feature.
From C4::Auth::get_template_and_user, we have
$userid = $q_userid;
$q_userid is previously set to the 'userid' CGI param.
We end up here if authonotrequired is set AND CGISESSID does not exist.
Test plan:
- Run:
$ prove t/db_dependent/Auth.t
=> FAIL: Regression test for checkauth fails
- Apply this patch
- Run:
$ prove t/db_dependent/Auth.t
=> SUCCESS: Tests pass.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 19 Jan 2017 14:43:38 +0000 (15:43 +0100)]
Bug 7143: Replace Santallan by Santellan
Missed one typo in about.tt.
Can go along with the next patch here.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Tue, 5 Apr 2016 11:56:24 +0000 (12:56 +0100)]
Bug 16202: GetIssuingCharges should return a collectable amount
Charges should not include elements less than a penny/cent
they are not displayed but can be saved to the database
causing "odd" behaviour down the line
Make the routine round the resultant charge to nearest cent,
so consistent values are returned.
Removed the one case where it was rounded post call.
Although the main danger is values generated by the discount
calculation apply the rounding to all returned charges in case
the item charge is defined using the 3rd or 4th decimal
places.
NOTE: prove -v t/db_dependent/Circulation.t triggers the change.
Though, all the returned amounts are 0.00 only.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 16 Feb 2017 22:19:59 +0000 (22:19 +0000)]
Bug 18135: Show alert if no authorities selected in batch record deletion
To test:
1) Go to Tools -> Batch record deletion
2) Select Authorities as record type, put in an auth id, click Continue
3) Unselect the authorities and click Delete selected records
4) Confirm an alert shows up
5) Clear the alert and confirm deleting the authority still works as
normal
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Tue, 17 May 2016 04:35:46 +0000 (04:35 +0000)]
Bug 16530: Adding a circ sidebar navigation menu and circSidebar syspref to activate/deactivate
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT Signed-off-by: Jan Kissig <jkissig@th-wildau.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In summary, changes are:
1) If you have chosen MySQL, Makefile.PL will ask you if you want TLS (default:
"no"), and then the locations for CA cert, client cert and client key
(reasonable defaults are provided). Settings <tls>, <ca>, <cert> and <key> are
added in koha-conf.xml
2) If <tls>yes</tls> in koha-conf.xml, the installer and database connection
scripts add the TLS options in both DBI connection strings and mysql command
line
To test
1/ Apply patch
2/ Check everything still works and db connections are the same as before
3/ Either run Makefile.PL and step through the options or edit your koha-conf.xml to
enable TLS
4/ Check db connections are still working
Patch provided to me by Dimitris Kamenopoulos and I reformatted it into a git patch,
any errors are probably mine
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Thu, 2 Feb 2017 21:18:51 +0000 (10:18 +1300)]
Bug 14764 - [followup] Addressing QA concerns
* removed Policy:
* put the syspref in alpha order with the others
* added els to the if.
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Wed, 2 Nov 2016 21:18:45 +0000 (10:18 +1300)]
Bug 14764: OPAC news selector
Test plan:
1) Add more than one library, at least two in total is needed. Make note
of which is your current user's home branch.
2) Go to Tools -> News and add one global ("All") news item and one
specific for each branch.
3) Apply the patches.
4) Perform database upgrades when you log in.
5) Go to OPAC main, it should work as before: Showing global news as
well as the news for your home branch once logged in.
6) Go to System Preferences -> OPAC and set 'OPACNewsBranchSelect' to
yes.
7) Go to OPAC main, you should see the global news item plus any items
for your home branch for the current user if logged in.
8) Above the news, you will see a dropdown that lists the branches.
Select one, and click "Change library."
9) You should now see global news and the news for the selected branch,
regardless of whether logged in or not.
Sponsored-By: Halland County Library
Fixes QA comments:
* fix 'system wide only' view for logged in user. We still show system
wide even when a library is selected.
* Removed the "change library" link
* Added a label to the field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 15 Feb 2017 00:30:57 +0000 (00:30 +0000)]
Bug 10978: Redirect to basket list of a supplier after deleting a basket
This patch redirects to the vendor's list of baskets after deleting a
basket, fixes breadcrumbs after deletion and also hides the toolbar
actions after deletion (seeing as you can't edit/export etc a basket
that no longer exists).
To test:
1) Go to Acquisitions -> find a vendor -> view a basket or create a new
basket
2) Delete the basket. Notice you are taken to a list of all vendors and
baskets
3) Apply patch and do step 1 again
4) Delete the basket. Notice appropriate breadcrumbs, no toolbar, and
confirm link to return to baskets for the vendor works.
Sponsored-by: Catalyst IT
Followed test plan, works as expected (links to vendor's baskets and all baskets) Signed-off-by: Marc Véron <veron@veron.ch>
Re-tested. Wording of buttons "Show baskets for vendor..." and "Show all
active baskets" makes sense. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 1 Dec 2016 11:47:31 +0000 (11:47 +0000)]
Bug 7663 - batch add barcodes to a list
This patch changes the barcode input on add list to a textarea and
process multiples barcodes to allow for adding many items to a list
at once
To test:
1 - Create a list
2 - Add some items
3 - Verify items are added and success reported
4 - Add these items again
5 - Verify you are notified they were not added
6 - Type invalid barcodes into the text area and submit
7 - Verify you are notifed of failure to add
8 - Try going to a list that doesn't exist and adding barcodes
i.e. http://localhost:8081/cgi-bin/koha/virtualshelves/shelves.pl?op=add_biblio&shelfnumber=9999&barcodes=4
9 - Verify correct error
10 - Try the above but with a list that exists while signed in as a patron
without lists permission:
i.e. http://localhost:8080/cgi-bin/koha/opac-shelves.pl?op=view&shelfnumber=3
11 - Verify correct error: "You do not have permission to view this list."
Signed-off-by: Chris Kirby <chris.kirby@ilsleypubliclibrary.org>
Works as advertised.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 15 Feb 2017 09:24:56 +0000 (10:24 +0100)]
Bug 18122 - Audio alerts: Add hint on where to enable sounds
This patch adds a hint to page Home > Administration > Audio alerts
and related help page about where to enable the sound system
(syspref 'AudioAlerts').
To test:
- Apply patch
- Disable syspref 'AudioAlerts'
- Go to Home > Administration > Audio alerts
- Note hint below title 'Audio alerts'
- Enable syspref 'AudioAlerts'
- Go to Home > Administration > Audio alerts
- Hint is no longer visible (since audios are enabled)
- Open Help page (top right)
- Verify that hint on help page makes sense.
Amended to add alert class as requested by comment #2 2017-02-21 mv
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Tue, 14 Feb 2017 19:42:15 +0000 (19:42 +0000)]
Bug 13685: Sorting by author in opac reading history
opac-readingrecord.pl was actually already set up to do this, the option
to sort by author was just not put into the tt file. This patch adds
that.
To test:
1) Log into OPAC, go to your reading history
2) Confirm that 'Order by author' shows in the dropdown
3) Confirm it works as expected
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Tue, 14 Feb 2017 01:21:01 +0000 (01:21 +0000)]
Bug 18108: Sorting by author in opac summary
To test:
1) Log into OPAC, go to your summary
2) Notice 'author' is in Title column, therefore unable to sort by
author
3) Apply patch and refresh page
4) Notice author has now been moved into Author column
5) Confirm sorting by author works as expected and sorting of all other
columns works as expected
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 7 Feb 2017 13:03:54 +0000 (14:03 +0100)]
Bug 18070: Correct error from podchecker on line 1376
Resolves:
*** ERROR: Spurious =cut command at line 1376 in file C4/AuthoritiesMarc.pm
Test plan:
[1] Run podchecker on C4/AuthoritiesMarc.pm
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 14 Feb 2017 15:41:26 +0000 (16:41 +0100)]
Bug 18070: [Follow-up] What should DelAuthority return?
Script tools/batch_delete_records.pl only checks the return value of
DelAuthority. The return value depends on DBI rows, which is not always
reliable. It may return -1 when it 'does not know'.
Testing $@ in tools/batch_delete_records.pl should actually be enough.
The return value was discarded in C4/ImportBatch.pm. Removing an unused
variable.
Test plan:
[1] Pick an authority record with a few linked biblios.
Delete this authority record via tools/batch_delete_records.pl.
Check if the linked biblio records are cleaned up.
[2] Bonus: Make a typo in the SQL statement of DelAuthority. Check
if batch_delete_records shows you the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 12:01:58 +0000 (13:01 +0100)]
Bug 18070: Extend sub merge to remove fields for deleted authorities
In order to accomplish this, we need to add some additional checks in
the merge routine. The actual change to remove the field, is quite
small.
Furthermore, we need to add a merge call in DelAuthority and adjust
the merge cron job accordingly.
The change is well supported by additional tests, including a simulation
of postponed removal via cron, if dontmerge is enabled.
Note: Deleting an authority with linked biblios is tested on the next
patch.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] Delete an authority without linked biblios from the Authorities
module. If the indexer is not fast enough, wait a bit and refresh to
verify that the authority is gone on authorities-home.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 10:46:21 +0000 (11:46 +0100)]
Bug 18070: Deleting an authority should update the linked biblio records
Adding a test where we delete an authority and prove that the linked
biblio still contains a reference to it.
Note: Currently, you can only delete a used authority from Tools,
batch record deletion. If you do, the biblio records will still
contain references to the deleted authority.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
Last test should fail: not ok 1 - Field 609 should be gone too
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 15 Dec 2014 13:10:56 +0000 (14:10 +0100)]
Bug 18037: Hold notes template cleanup (from 15545)
From the second patch of bug 15545:
Removing some unused template code related to a former approach.
Adding some changes for future extension by bug 15545.
This patch was tested by Liz Rea when the routine IsHoldNoteRequired was
called by opac-reserve.pl. The only change here is that we do not yet
call this routine; so leaving her original signoff.
Test plan:
[1] Enable OPACHoldNotes.
[2] Place a hold on a serial record. No behavior change.
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Emma Smith [Tue, 17 Jan 2017 03:23:18 +0000 (03:23 +0000)]
Bug 17840: adding classes to notes in checkouts
Test Plan
1) Add an internal and a public note to an item.
2) Check out the item.
3) Verify that both notes are shown in between title and barcode in the
second column of the details table.
4) Verify there is an empty class="" in the HTML source code for each
5) Apply patch and refresh page
6) View page source, confirm that class has been changed
I tested this by first applying the patch for bug 17919 to catch the
check-in software error. Patch working as expected :)
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 26 Jan 2017 11:43:14 +0000 (12:43 +0100)]
Bug 17334: Format the date according to the system preference
- Use KohaDates TT plugin to format the date correctly
- Do not use a temporary variable
- Replace:
patron's info Requested: Datetime
with
patron's info - Requested on Datetime
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alex Buckley [Fri, 20 Jan 2017 03:59:24 +0000 (03:59 +0000)]
Bug 17334- Added a timestamp to the members-update.tt To show the user when the pending modifications were requested.
Test plan:
1.Log into OPAC and click on Lists->Your Lists->your personal details
2. Change/add a value in that form
3. Select the 'Submit update request'
4. Log into the Koha staff interface, then go to the url:
cgi-bin/koha/members/members-update.pl
5. You will see near the top of each box containing a pending request the following are displayed: surname, firstname,
patron category, branch, and cardnumber but no timestamp.
6. Apply this patch
7. Repeat steps 1,2, 3, 4
8. You will now see timestamp in the format "Requested: YYYY-MM-DD
HH:MM:SS" next to each patrons details near the top of each pending
request box.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 27 Feb 2017 12:21:18 +0000 (13:21 +0100)]
Bug 16966: [QA Follow-up] Check count, not size in template
The method size is not covered by tests at koha-tmpl/intranet-tmpl/prog/en/modules/tools/cleanborrowers.tt line 163.
The method size is not covered by tests at koha-tmpl/intranet-tmpl/prog/en/modules/tools/cleanborrowers.tt line 183.
Script cleanborrowers passes patrons_to_delete and patrons_to_anonymize to
the template. One is an array ref where we should use 'size', the other is a
Koha::Patrons object where we should use 'count'.
If we don't, we will not anonymize a lot of records ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 16:25:24 +0000 (17:25 +0100)]
Bug 16966: Koha::Patrons - Move GetBorrowersWithIssuesHistoryOlderThan to search_patrons_to_anonymise
The C4::Members::GetBorrowersWithIssuesHistoryOlderThan subroutine is supposed
to return the patrons with an issue history older than a given date.
It would make more sense to return a list of Koha::Patrons.
On the way, the code from AnonymiseIssueHistory will be moved as well to
anonymise_issue_history.
Note that these 2 subroutines are strongly linked: one is used to know the
number of patrons we will anonymise the history, the other one is used to
anonymise the issues history. The problem is that the first one is not used to
do the action, but only for displayed purpose.
In some cases, these 2 values can differ, which could be confusing.
Case 1:
The logged in librarian is not superlibrarian and IndependentBranches is set:
if 2+ patrons from different libraries match the date parameter, the interface
will display "Checkout history for 2 patrons will be anonymized", when actually
only 1 will be.
Case 2:
If 2+ patrons match the date parameter but one of them has his privacy set to
forever (privacy=0), the same issue will appear.
This patch moves the code from C4::Members::GetBorrowersWithIssuesHistoryOlderThan
to Koha::Patrons->search_patrons_to_anonymise and from
C4::Circulation::AnonymiseIssueHistory to
Koha::Patrons->anonymise_issue_history
Test plan:
1/ Confirm the 2 issues and make sure they are fixed using the Batch
patron anonymization tool (tools/cleanborrowers.pl)
2/ At the OPAC, use the 'Immediate deletion' button to delete all your
reading history (regardless the setting of the privacy rule)
3/ Use the cronjob script (misc/cronjobs/batch_anonymise.pl) to
anonymise patrons.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The next patch will move C4::Circulation::AnonymiseIssueHistory and
C4::Members::GetBorrowersWithIssuesHistoryOlderThan to Koha::Patrons
This patch move the history anonymisation code to the Patrons.t test
file and the entire subtest related to StoreLastBorrower to
StoreLastBorrower.t
It just moves and add some minor adjustements.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 14:57:26 +0000 (15:57 +0100)]
Bug 16966: GetBorrowersWithIssuesHistoryOlderThan - Highlight the existing issue in tests
If IndependentBranches is set, the code is buggy. This patch only
highlight the bug by providing a test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 21 Feb 2017 18:13:02 +0000 (13:13 -0500)]
Bug 13968: Follow up - Clean HTML tags for hints
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Sat, 18 Feb 2017 16:15:06 +0000 (17:15 +0100)]
Bug 13968 - Branch email hints are misleading
This patch replaces missleading notes with Reply-To and Return-Path fields
to reflect indicate falback values if they are empty (ReplyToDefault and
ReturnpathDefault system prefs).
To test:
- Apply patch
- In Home > Administration > Libraties and Groups, edit a library
- Verify that hints display for fields Reply-To and Return-Path, indicating
their default values.
Amended to remove extra </li> - 2017-02-21 mv
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 14 Feb 2017 09:52:14 +0000 (10:52 +0100)]
Bug 18087: Handle invalid filetypes
If an invalid file is used as biblionumber list, we should display a
message.
Test plan:
1/ Use csv, plain text files
=> Should work
2/ Use invalid files (binary files like pdf, doc*, xsl*, etc.)
=> Should not work and see a warning message.
Amended patch after signoff: Remove one warn debug line
Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joy Nelson [Thu, 9 Feb 2017 19:42:57 +0000 (11:42 -0800)]
Bug 18087 - Clarification on File type when using file of biblionumbers to export data
Added a line to the screen detailing the types of files that can be used to upload a list of biblionumbers.
Test plan:
1. Go to tools->export data
2. under File option, (File types accepted: .csv and .txt) should appear
3. Check both Bibliographic and Authority Export screens for this new string.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17992: REST api: Remove the use of ->unblessed from Cities controller
As bug 17932 adds TO_JSON to Koha::Object(s), there's no need for using
it. Also, as this is a reference implementation for developers to copy
and paste it is sensible to make this change even when this is not
causing any bug.
To test:
- Apply the patch
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/api/v1/cities.t
=> SUCCESS: Tests still pass!
- Sign off :-D
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 23 Feb 2017 00:35:13 +0000 (00:35 +0000)]
Bug 18160 - Error when OverDriveCirculation not enabled
This patch only executes OverDrive circulation JS if
OverDriveCirculation pref is enabled
To test:
1 - Disable OverDriveCirculation
2 - Log in to opac and view summary tab
3 - Note 'Internal server error'
4 - Apply patch
5 - Repeat and note error is not present
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17941 add tests to cover the optimization of the nested loop
the new code skip testing for more borrowers if the item can't be renewed
this require more tests for the case where 2+ items are reserved.
I tried to add 1 more reserve to the main test suit, but too many other tests
rely on specific holds, and I couldn't get around it.
Instead, I added a subtest that consider the specific simple case and leave the
other test cases exactly has they were designed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-patch: Just fix 3 indendations
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17941 avoid scanning the full cartesian product
when a item match a borrower, there is no point in checking the
other borrowers
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Blou [Fri, 27 Jan 2017 16:51:26 +0000 (16:51 +0000)]
Bug 17260: updatedatabase.pl fails on invalid entries in ENUM and BOOLEAN columns
The loading of file admin/searchengine/elasticsearch/mappings.yaml
specifies 'type' as empty, which fails with Mysql 5.7+ which is more
stringent.
Also, forcing an empty value into a boolean also fails.
Both issues arise when updatedatabase.pl hit 3.23.00.050.
NOTE: both issues could also be resolved by actually setting values in
the load file. This doesn't make this solution incorrect, though.
To Test/reproduce:
-1) Happens with Mysql 5.7.4. Maybe earlier, but certainly at
that point. Use a Xenial kohadevbox to more easily test.
0) Find a database on 3.22 or earlier, save it.
a) place
sql_mode=IGNORE_SPACE,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
into the [mysqld] section of /etc/mysql/mysql.conf.d/mysqld.cnf
b) restart you mysql server
c) drop the db and recreate it
d) checkout the 3.22.x branch
e) do a web install
f) remove the added sql_mode
g) restart the mysql server
1) Set your code base to master
2) run updatedatabase.pl
3) See the errors on 3.23.00.050
4) Apply the patch
5) Reload the 3.22 db.
a) repeat steps 0(a)-0(g)
b) don't forget the caching issues
6) succeed with updatedatabase.pl
7) drop the db and recreate it
8) run the web installer
9) notice no issues either.
10) run koha qa test tools
NOTE: This bug only solved the upgrade portion.
I added the kohastructure.sql change as well.
I confirmed that all the code changes were
triggered with this test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Mehdi Hamidi <mehdi.hamidi@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 23 May 2014 15:54:26 +0000 (11:54 -0400)]
Bug 12461 - Add patron clubs feature
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch>
Srdjan [Tue, 8 Dec 2015 06:07:41 +0000 (19:07 +1300)]
bug_16034 Add overdrive info to the users page in the public interface
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Cormack [Tue, 18 Aug 2015 03:55:51 +0000 (15:55 +1200)]
bug_16034 Adding a new syspref - OverDriveCirculation
If set to true, Opac will integrate OverDrive patron services
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Tue, 8 Dec 2015 06:06:27 +0000 (19:06 +1300)]
bug_16034 Koha::ExternalContent::OverDrive - a wrapper around WebService::ILS::Overdrive::Patron
* Using the upstream module for all the heavy lifting
* opac/external/overdrive/auth.pl - 3-legged authentication handler
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 8 Feb 2017 02:07:29 +0000 (02:07 +0000)]
Bug 18077: Batch item modification link is bold when batch item deletion is active in tools menu
To test:
1) Go to Tools -> Batch item deletion
2) Notice the link for Batch item MODIFICATION is bold, not the deletion
link
3) Apply patch and refresh page
4) Correct link should now be bold.
5) Go to batch item modification and confirm the correct link is bold
Sponsored-by: Catalyst IT
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch>
Re-tested, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Tue, 14 Feb 2017 02:13:33 +0000 (02:13 +0000)]
Bug 18109: Adding font awesome icon to uncertain prices button
To test:
1) Go to Acquisitions -> search for a vendor
2) View a basket with uncertain prices or add an order with uncertain
prices to a basket
3) Confirm that font awesome icon is appropriate and button still works
as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caitlin Goodger [Thu, 19 Jan 2017 00:54:24 +0000 (00:54 +0000)]
Bug 17852 Follow up.Multiple URLs (856) in list email are broken
This is a follow-up to my previous patch. This fixes it on the OPAC and
the previous one was from the intranet
Test Plan
1: Add multiple urls to a biblographic record
2: Add the biblographic record to a list and then email it from the OPAC
3: See that the links are broken and have been merged into one.
4: Apply patch
5: Send the list again and see that the links work
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caitlin Goodger [Tue, 17 Jan 2017 21:37:49 +0000 (21:37 +0000)]
Bug 17852; Multiple URLs (856) in list email are broken.
Test Plan
1: Add multiple urls to a biblographic record
2: Add the biblographic record to a list and then email it.
3: See that the links are broken and have been merged into one.
4: Apply patch
5: Send the list again and see that the links work
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Luke Honiss [Tue, 17 Jan 2017 02:27:55 +0000 (02:27 +0000)]
Bug 17865 'If a subscription has no history end date, it shows as expired today in OPAC'
--TEST PLAN--
1) View a subscription with no history end date
2) Search for an item with a subcription in OPAC
3) Under subscription tab click more details
4) The end date will be the current date
5) Apply patch and refresh
6) The end date will not be shown
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 20 Feb 2017 09:49:11 +0000 (10:49 +0100)]
Bug 18026: Correct URL to database columns from .pref files
Recently the DB schema website has been updated.
The link to the columns' tables is now
http://schema.koha-community.org/master/tables/table.html
http://schema.koha-community.org/16_11/tables/table.html
http://schema.koha-community.org/16_05/tables/table.html
instead of
http://schema.koha-community.org/tables/table.html
To have a specific schema per Koha version.
To avoid fixing this link every release this patch adds a __VERSION__
marker to replace with the $version if stable ($version % 2) or 'master'
Test plan:
On master, 16.11.x and 16.05.x
Search for PatronSelfRegistrationBorrowerUnwantedField,
BorrowerMandatoryField and UniqueItemFields
Click on the link
You should get the correct page
This patch WILL NOT WORK on 3.22.x
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Sun, 19 Feb 2017 04:06:16 +0000 (23:06 -0500)]
Bug 18111: Swap framework_name and frameworkcode
With the frameworkcode changed to an empty string, which really
is closer to the physical reality, some javascript somewhere
breaks. This means the spinner does not appear when you confirm
that you wish to import it.
TEST PLAN
----------
1) apply first patch
2) export default framework, doesn't matter format
3) import default framework using that file.
4) answer yes or whatever it is.
-- spinner does not appear.
5) apply this patch
6) import default framework use the same file.
7) answer yes or whatever it is.
-- spinner does appear.
8) decide if you wish to find and fix the javascript conditions.
if yes -- do so, and then obsolete this once you have.
if not -- sign this off after running koha qa test tools
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 14 Feb 2017 16:21:45 +0000 (16:21 +0000)]
Bug 18111: Fix import of default framework
Caused by bug 16035.
Recreate the issue:
Go to Home › Administration › MARC frameworks
For the default framework: Actions > import
It will not work
Test plan:
Confirm test plans from bug 16035 and bug 17389 still pass
Confirm that the import for the default framework now works
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Magnus Enger [Tue, 18 Oct 2016 09:47:19 +0000 (09:47 +0000)]
Bug 17461: Warn about plugins that can't be loaded
The logs should have some info if a module has been installed that can
not be loaded.
To test:
- Make sure you have an up to date dev install
- Install v1.0 of the KitchenSink plugin from
https://github.com/bywatersolutions/koha-plugin-kitchen-sink/releases
- Make sure the plugin does not show up in the list of installed
plugins, and that the intranet-error.log has no info about it
- Apply the patch
- Reload plugins-home.pl
- Verify that there is now some interesting info in intranet-error.log
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as advertised, generates useful diagnostic information in the form of a log entry to either intranet-error or plack-error.log. Relief, thanks Magnus! Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log