Philip Orr [Thu, 18 Apr 2024 09:37:59 +0000 (09:37 +0000)]
Bug 31097: Display restriction types
This patch changes the display of patron
restrictions in checkout and patron details
pages to show the restriction type for each
restriction. It also changes the display so
each restriction is shown on a newline.
To test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Place a hold on any bib record
2. Cancel the hold by clicking the trash can icon next to it
--> Note that there is an empty red page section in the modal
3. Apply patch and refresh the page
4. Repeat steps 1-2
--> No empty red page section
5. Confirm that the test plan from bug 33174 still works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 11:27:06 +0000 (14:27 +0300)]
Bug 36534: Batch operations when using limit in report
When report results number exceeds the result per page limit, batch
operations link reads "Batch operations with (page limit) records" even
if there are more or less shown records (more when using limit in SQL or
less in the last page of result). This patch fixes the link text to
actual shown records.
To test:
1) Create a report of items with a limit of e.g., 26.
2) Run report.
3) See that number of results shown exceeds 20 but the link says "Batch
operations with 20 visible records".
4) See that the second page shows 6 results but the link is still for 20
records.
5) Apply patch.
6) Run report again.
7) See that the link texts will show correctly 26 records on the first
page and 6 records on the second.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 7 May 2024 08:45:56 +0000 (09:45 +0100)]
Bug 36757: Sync concerns tables
This patch re-syncs the two catalog concerns display tables markup. We
add the 'Title' field into the catalog/detail version of the table and
split the columns settings so you can control the table distinctly from
the cataloguing module version so we can hide 'title' by default in the
details display tab.
This results in the table matching the display from the cataloguing
module page, i.e. the assignee and status detail displays.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 24 Apr 2024 17:05:18 +0000 (17:05 +0000)]
Bug 36687: Update itemtypes.notforloan to not allow NULL values and change to tinyint(1)
To test:
1. Have some itemtypes.notforloan values set to NULL.
2. APPLY PACTH, updatedatabase, restart_all
3. When you updatedatabase those values should be set to 0.
4. Try updating an itemtypes.notforloan value to NULL. You cannot.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:22:13 +0000 (14:22 +0000)]
Bug 34263: (QA follow-up): Use flatpickr .clear instead
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 13:09:39 +0000 (16:09 +0300)]
Bug 34263: Suspending holds consecutively populates previously used date falsely
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36786: (Bug 31791 follow-up) Koha explodes when trying to edit a biblio with invalid biblionumber
After changes made to addbiblio with the bug 31791, when trying to open the
editor with biblionumber=<invalid_number> (e.g. a deleted biblionumber)
Koha explodes with a message << Can't call method "can_be_edited" on
an undefined value at /kohadevbox/koha/cataloguing/addbiblio.pl line 555 >>
Test plan:
==========
1. Try to edit a biblio giving as a biblionumber (in URL) a non-existing
biblionumber, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=1234567
Koha should explode with the message:
Can't call method "can_be_edited" on an undefined value at
/kohadevbox/koha/cataloguing/addbiblio.pl line 555
2. Apply the patch; restart_all.
3. Repeat p.1. You should get a page with the info: "The record you are trying
to edit doesn't exist...".
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 2 May 2024 16:44:36 +0000 (16:44 +0000)]
Bug 36750: (35138 follow-up) Use same display code for OPAC
To test:
1 - In OPAC with ES enabled do a search
2 - Note missing facet labels
3 - Apply patch
4 - They are back!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Tue, 7 May 2024 05:41:54 +0000 (05:41 +0000)]
Bug 36796: (follow-up) Fix column descriptions for the statistics table
This follow-up to bug 32312 fixes the descriptions for the statistics
database columns, used in guided reports.
It removes the duplicate statistics section in Koha/Database/Columns.pm
so that descriptions are displayed for all columns, as originally
intended.
It also adds a description for the interface column (a new column added
after the original patch was pushed).
Test plan:
1. Go to Reports > Guided reports > Create guided report.
2. Choose 'Circulation' for the module to report on and select
'Next'.
3. Choose 'Tabular' for the type of report and select 'Next'.
4. Scroll down to the statistics table section and note that some
columns have descriptions and some don't:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Type / statistics.type
Item number / statistics.itemnumber
Item type / statistics.itemtype
statistics.other
statistics.location
Borrower number / statistics.borrowernumber
statistics.ccode
statistics.categorycode
statistics.interface
5. Apply the patch.
6. Restart all the things (restart_all).
7. Repeat steps 1 to 4.
8. Scroll down to the statistics table section again and note that all
columns now have descriptions:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Transaction type / statistics.type
SIP mode / statistics.other
Item number / statistics.itemnumber
Koha item type / statistics.itemtype
Shelving location / statistics.location
Borrower number / statistics.borrowernumber
Collection / statistics.ccode
Patron category / statistics.categorycode
Interface / statistics.interface
9. Sign off :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 28 Aug 2023 14:42:49 +0000 (14:42 +0000)]
Bug 30579: (follow-up) Add fieldsets and style disabled elements
This patch surrounds each section with a fieldset which allow enabling/disabling
all the elements in one go. CSS is added to make it clear which fields are disabled.
Button for item specific is moved form the multi-hold section
Javascript is simplified to use the new fieldsets
To test:
1 - Repeate test plan on earlier commit
2 - Additionally, search and select multiple records and place hold
3 - Confirm multi-hold placing works :-)
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 23 Sep 2022 15:06:05 +0000 (15:06 +0000)]
Bug 30579: Disentangle multi-hold and single bib forms
This patch alters the structure of the hold request page to make it clear
that "Hold next available", "Hold item group", and "Hold specific item" are
mutually-exclusive options.
While there is some duplication from this, it makes the sections easier to read
and allows for more variation in the two forms
To test:
1 - Find a bib with multiple items
2 - Enable item groups and item group holds in system preferences
3 - Load the records detail page
4 - Add an item group on the item groups tab
5 - Select two items and add to the group
6 - Click the 'Holds' tab and search for/select a patron
7 - Confirm the three levels of holds are clear
8 - Confirm checking the radio next to one disables the others
9 - Check 'Hold next available item from an item group'
10 - Do not select an item group
11 - Click 'Place hold' and confirm you are notified of need to select an item group
NOTE: if you are overrirding you may also have an alert that the items cannot normally be put on hold
12 - Click 'Place hold on a specific item' - but do not select an item
13 - Click place hold and confirm there is an alert and you cannot continue
14 - Click 'Hold next available item' and place hold
15 - Hold is successfully placed
16 - Place another hold for the same patron
17 - Only the 'Hold next available item' form is enabled
18 - Confirm you cannot switch hold type
19 - Place hold
20 - Select a new patron and place an item group hold
21 - Select the same patron and place another hold - you are forced to place an item group hold
22 - Select a new patron and place a hold on a specific item
23 - Place a second hold, confirm you can only place it on a specific item
Signed-off-by: hinemoea <hinemoea@inlibro.com> Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 09:04:08 +0000 (10:04 +0100)]
Bug 36396: Export/import the yaml config
Test plan:
Export the ES fields/mappings using
misc/search_tools/export_elasticsearch_mappings.pl > mappings.yaml
Copy this file to admin/searchengine/elasticsearch/mappings.yaml
Reset the mapping from the UI
Notice that the links to the AV categories have been preserved
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 08:23:19 +0000 (09:23 +0100)]
Bug 36396: UI - OPAC
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 08:29:45 +0000 (09:29 +0100)]
Bug 36396: Prevent link to av for 'specials'
See previous commit message, 'QA' part.
We do not support the "specials" categories.
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 15:48:56 +0000 (16:48 +0100)]
Bug 36396: Link facet with authorised value category - ES
This new feature adds the ability to link an ES facet to an authorised
value category, in order to display a description instead of the code.
Test plan:
1. Go to the ES mapping admin page
2. Notice the new "Authorized value category" column in the facets
config table
3. Create a new facet that is linked to a search field containing values
from an authorised value category. Pick this category in the list
4. Save
5. Reindex
6. Notice that the descriptions are now displayed (staff and OPAC) in
the search result page.
QA: See the related bug report for possible improvements. It's not
easy at all to deal with the "specials" here, a lot of changes must be
done in how we fetch/cache the AVs.
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 14:51:44 +0000 (15:51 +0100)]
Bug 36396: DBIC schema changes
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 14:45:11 +0000 (15:45 +0100)]
Bug 36396: DB changes
Add the new DB column search_field.authorised_value_category
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When languages come into facets in ES, Koha should know
the names for the codes used records. Otherwise
the three-letters language code is being displayed in
the facet instead of name. Koha now knows about 77
languages, many are still missing.
The most missed 76 languages, in order of occurrences
in my data sets, are (MARC 21 codes): grc, syr, chu, cop, arc,
ang, epo, syc, gez, sla, san, csb, akk, gmh, egy, wen, gle,
fro, rom, mac, mal, uga, mis, sem, sux, pli, bos, che, dum,
kaz, tib, enm, frm, mlt, got, nds, ira, lin, uzb, ave, cho,
jrb, bnt, pal, tut, goh, hsb, inc, mlg, roa, cel, sam, bem,
fur, gem, hit, lad, nah, ota, peo, pro, tat, wel, yor, bra,
den, hau, her, kas, mga, myn, nya, pra, que, tir, tuk.
Plus: gwi, dgr, chp asked in bug 23693.
Here, I do not put language codes which are extremely rare
in my data sets.
Subtags and names for language_subtag_registry are taken from
https://www.iana.org/assignments/language-subtag-registry/language-subtag-registry,
English names for language_descriptions.description - from
https://www.loc.gov/marc/languages/language_code.html, and Polish names -
from https://przepisy.bn.org.pl/aneksy#25-kody-jezykow---marc-21.
Test plan:
==========
1. Hava a ES installation with reasonable number of records,
with a variety of languages in 008/35-39 not present in
Koha (you can modify your record with codes from the list above).
Set FacetMaxCount to a high number (like 500 or so,
dependiing on the size of your data set).
2. Do a search, like '*a*'.
3. Controll the content of the Language faset -- you should
see some bare codes instead of language names.
4. Apply the patch -- update the database.
5. Perform the same search.
6. You should see the names in place of the codes.
7. Optionally, you can activate the Polish translation and
you should be able to see Polish names for the added languages.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thomas Klausner [Mon, 6 May 2024 12:39:35 +0000 (12:39 +0000)]
Bug 36151: Update leaflet.js
Koha currently comes with leaflet.js 1.0.3 which is quite old (2017).
For GeoSearch (Bug 31652) we need a more current leaflet.js, so this
patch updates leaflet.js to the current version 1.9.4
Test plan:
* Go to staff /cgi-bin/koha/admin/usage_statistics.pl where you see a
map and can set the location of the library by clicking on the map.
* Apply the patch
* Again, go to staff /cgi-bin/koha/admin/usage_statistics.pl
* Do a complete reload of the page
* It should still work:
* Display the location as a pin
* Set a new location
There was no code change necessary besides downloading the current
version of leaflet.js and updating the about-page
Sponsored-by: Geosphere Austria Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 3 May 2024 14:07:44 +0000 (14:07 +0000)]
Bug 35169: (QA follow-up) Fix up syspref language and group them together
The language used in the syspref preferences was a bit confusing.
Also, it makes sense to keep these two together on the page as they
are intrinsically linked.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Sat, 9 Mar 2024 17:53:13 +0000 (17:53 +0000)]
Bug 35169: (follow-up) perltidy
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 29 Apr 2024 20:39:08 +0000 (20:39 +0000)]
Bug 36709: Add confirm flag to update_localuse_from_statistics.pl script
To test:
1. APPLY PATCH and restart all
2. Run the update_localuse_from_statistics.pl script without a confirm flag, nothing happens.
3. Run the script and add the --confirm flag, stuff happens.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 30 Apr 2024 10:18:12 +0000 (10:18 +0000)]
Bug 36730: (Bug 35428 follow-up) po files (sometimes) fail to update
Under some circumstances (e.g. non-standard disk latency) po files fail
to be generated. The output from the gulp po:update --lang xx-XX task
is than like this:
[10:01:39] 'po_update_staff' errored after 6.41 s
[10:01:39] Error: ENOENT: no such file or directory, open '/tmp/koha-5WCc9s/Koha-staff-prog.pot'
This is due to the time dependencies inside the function flush (callback)
(in the function xgettext) in gulpfile.js. It happens that the
/tmp/koha-NNNNNN folder gets deleted before the asynchronous callback
function called by fs.readFile is completed. The callback should copy
the content of the .pot file from /tmp/koha- to its final destination,
while, in parallel in fact, the folder inside /tmp is being removed.
This creates a race condition.
Test plan:
==========
Hard to reproduce. But the race condition found in the code should
be obvious.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Tue, 19 Mar 2024 18:14:27 +0000 (14:14 -0400)]
Bug 34972: Remove GetOtherReserves
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
A Marcel's QA patch to Bug 36552 added use POSIX; in two spots.
In https://metacpan.org/pod/POSIX we read:
CAVEATS
Everything is exported by default (with a handful of exceptions). This is
an unfortunate backwards compatibility feature and its use is strongly
discouraged. You should either prevent the exporting (by saying use
POSIX ();, as usual) and then use fully qualified names (e.g.
POSIX::SEEK_END), or give an explicit import list. If you
do neither and opt for the default (as in use POSIX;), you will
import hundreds and hundreds of symbols into your namespace.
This patch fixes this.
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:58:33 +0000 (12:58 +0200)]
Bug 36790: List table columns for 230600052 queries
We must list the columns, or the db rev will fail when a new column is
added. It happened here when 33478 added 'style'
Also remove id and dates
To test:
1. On current main, run:
$ ktd --shell
k$ perl /kohadevbox/misc4dev/run_tests.pl --koha-dir=. --run-db-upgrade-only
=> FAIL: Tests explode for DB query issues
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 14 Mar 2023 13:22:27 +0000 (14:22 +0100)]
Bug 36554: Document languages from field 041 should be present in 'ln' search field and Languages facet (MARC 21)
In Elasticsearch, the field 041 (subfields: a, d, e, i, j)
is not indexed with 'ln' search field. As a result, records cannot
be found when searching with languages present in 041 (but only
with the one from 008/35-37), and the languages are also missing
from the facet.
Subfields content (only relevant subfields):
$a - Language code of text/sound track or separate title
$d - Language code of sung or spoken text
$e - Language code of librettos
$i - Language code of intertitles
$j - Language code of subtitles
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In ktd with its test data, make a biblio search for a language present
in 041 a/d/e/i/j but not in 008/35-37, e.g. for Japanese (with ln:jpn
or from Advance search). You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Repeat the test. You should get some records and also you should see
the Japanese language in the Languages facet.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 29 Feb 2024 16:36:34 +0000 (16:36 +0000)]
Bug 36390: Two minor OPAC CSS fixes
This patch makes corrections to OPAC CSS to address two small issues.
To test, apply the patch and rebuild the OPAC CSS.
- Perform a catalog search which will return multiple results..
- In the table of search results, check the icon and text for the
controls under each title: "Place hold", "Add tag", "Add to cart" etc.
- The colors should be consistent, with a slightly darker blue for the
icons.
- Scroll down until the table header "sticks" to the top of the
viewport.
- There should be no gap between the header row with the pagination
links and the row with the "Select all", "Clear all", etc. controls.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 12 Feb 2024 22:03:38 +0000 (22:03 +0000)]
Bug 36074: Add classes to materials specfied message on check in and checkout when CircConfirmItemParts is on.
To test:
1. APPLY PATCH
2. Set CircConfirmItemParts to 'Require'.
3. Add a materials specified message to an item. ( 952$3 )
4. Add the following CSS to your IntranetUserCSS:
5. Checkout that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
6. Check in that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Thu, 21 Mar 2024 16:37:13 +0000 (16:37 +0000)]
Bug 31981: Add classes to each NEEDSCONFIRM message in circ/circulation.tt
This patch adds a 'needsconfirm' class and a unique class to each NEEDSCONFIRM message on circ/circulation.tt to make these easier to style individually.
To test:
1. APPLY patch
2. Review the diff to see each of the NEEDSCONFIRMATION messages.
3. Add some CSS to IntranetUserCSS like this:
4. Place a hold on an item for Patron A, do not trigger the hold, and check the item out to Patron B. The message background is blue.
5. Then check the item in, confirm the hold, then check the item out to Patron B. The message background is orange
6. Check something out that is already checked out to that patron, message background is lime green.
7. Have too much debt and check something out to a patron, message is red.
Note: There are plenty more NEEDSCONFIRMATION messages but I don't think we need to test every single one.
Note: These background colors are more testing purposes only. Signed-off-by: Donna <donna@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 11 Apr 2024 18:02:14 +0000 (18:02 +0000)]
Bug 36584: Add fields 520, 561, and 563 (MARC 21) to ES note search field
With Zebra, the general keyword search covered the entire record content,
even if the field was not explicitly indexed with a Zebra index (the Any index).
With Elasticsearch only the content of the fields explicitly indexed
can be found with general keyword search. This is OK, to some extent, but with
the current configuration it hides the content fo some important notes from the
searches, and librarians complained about that: 520 - Summary, etc.,
561 - Ownership and Custodial History, 563 - Binding Information.
This patch adds the content of 520, 561, and 563 fields to the 'note'
search field.
Test plan
=========
1. Have an installation with Elasticsearch.
2. Add some information to the 520, 561, and/or 563 fields (561 is
hidden in the default framework--one should enable it to be able to use
the 561 field). Save teh record.
3. Try to find the record with the general keyword search, with the words
you used. If they were specific enough, you will get no results.
4. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
5. Confirm that now you are able to find the record with the information
you entered.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 11 Apr 2024 14:32:51 +0000 (14:32 +0000)]
Bug 36578: Elasticsearch: publisher-location (pl) index should include field 752 (for old prints) and also support UNIMARC
Extension to bug 36269: 1) when cataloguing old prints, the standardized form of
the place of publication is given in the field 752 and as such should also be indexed.
2) Also, normal UNIMARC fields for publication place should be indexed (210a, 214a).
Test plan
=========
Scenario A (MARC 21, field 752)
-------------------------------
0. Have an installation with Elasticsearch and MARC 21 configuration.
1. Activate subfields 752 $a, $d in the default framework (Visibility: Editor).
2. Edit an existing record with this framework, putting some rare words in the
752 $a and $d subfields.
3. Try to make a search with tis words (general keyword or by publication place,
i.e. pl:).
4. You hsold get no results.
5. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
6. Repeat p. 3. You should get your edited record.
Scenario B (UNIMARC)
--------------------
0. Have an installation with Elasticsearch and UNIMARC configuration.
1. Try to search for a publication place, either with pl: directly in the
search window, or in Advanced search, with Publisher location.
With ktd UNIMARC test date you can search for 'Ste Geneviève Cedex'.
2. You should get no results.
3. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
4. Repeat p. 1. You should get some results (with ktd test data set and
Ste Geneviève Cedex - record #1).
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 34693: Add 035$a as Other-control-number index in default authorities search indexes
This patch adds a new index for authorities, Other-control-number, and maps it to 035$a.
This will help when trying to match authority records when importing external records.
Test 1:
0. Make sure Elasticsearch is set as the search engine
1. Apply patch and restart
2. Import the attached record
2.1. Go to Cataloging > Stage records for import
2.2. Choose the file
2.3. Click Upload file
2.4. Choose Record type: Authority
2.5. Click Stage for import
(wait until the job is finished...)
2.6. Click View batch
2.7. Click Import this batch into the catalog
(wait until the job is finished...)
2.8. Click Manage imported batch
2.9. Click View next to the record
2.10. Note the auth id number
3. Examine the ES entry for the record (replace INDEX_NAME with the index name (found in koha-conf.xml and XX with the auth_id)
Test 2 (optional):
1. Steps 1 and 2 as above
2. Add a matching rule to match on 035$a for authority records
2.1. Go to Administration > Record matching rules
2.2. Click New record matching rule
2.3. Fill out the form
- Matching rule code: enter a code (for example AUTCONTROL)
- Description: enter a description (for example 035$a for authorities)
- Match threshold: 100
- Record type: Authority record
- Search index: Other-control-number
- Score: 100
- Tag: 035
- Subfields: a
2.4. Click Save
3. Import the same record again, checking for matches using the new rule
3.1. Go to Cataloging > Stage records for import
3.2. Choose the file
3.3. Click Upload file
3.4. Choose Record type: Authority
3.5. Choose Record matching rule: rule created above
2.6. Click Stage for import
(wait until the job is finished...)
--> It should say that 1 record was found using the rule
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36247: MARC21 Addition to relator terms in technical notice 2024-02-27
This patch adds the relator code gdv (Game developer) in the list of
MARC21 relator terms in Koha.
To test:
1. Apply patch and reset_all
2. Go to Administration > Authorized values > RELTERMS
3. Search for gdv
--> The new relator code should be there with its corresponding term
"Game developer"
Note: this is added in the installer files. It will not affect existing
installations. For existing installations, add the new relator code in
Administration > Authorized values > RELTERMS.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the default MARC21 framework to reflect the changes
brought by Update 37 (December 2023).
To test:
1. Apply patch and reset_all
2. Go to Administration > MARC bibliographic framework
3. Click Actions next to the default framework and choose MARC structure
4. Check for the changes detailed in the update
https://www.loc.gov/marc/bibliographic/bdapndxg.html
- Two subfields of 022 should be marked as obsolete
- l ISSN-L [OBSOLETE]
- m Canceled ISSN-L [OBSOLETE]
- There should be a new field 023, named CLUSTER ISSN
- This field should be repeatable
- Subfields:
- 0 Authority record control number or standard number (NR)
- 1 Real World Object URI (R)
- 2 Source (NR)
- 6 Linkage (NR)
- 8 Field link and sequence number (R)
- a Cluster ISSN (NR)
- y Incorrect Cluster ISSN (R)
- z Canceled Cluster ISSN (R)
- There should be one new subfield in field 532
- 3 Materials specified (NR)
5. Optional: run the framework test in Administration > MARC
bibliographic framework test
--> All should be OK
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 19 Mar 2024 15:06:08 +0000 (15:06 +0000)]
Bug 35895: (follow-up) Add markup comments
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 19 Mar 2024 15:05:25 +0000 (15:05 +0000)]
Bug 35895: Reindent tags review template
This patch reindents the tags review template so that it has consistent
indentation, with tab indentation coverted to space.
The patch also adds "FILTER collapse" around the <style> block in the
head of the page.
To test, apply the patch and go to Tools -> Tags.
- The page should look unchanged.
- Test that no functionality has been affected:
- Tag searches
- Tag status changes
- Check lists
- If you view the diff while ignoring whitespace the only changes should
be places where line breaks were introduced
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 1 May 2024 08:57:49 +0000 (09:57 +0100)]
Bug 27753: (QA follow-up) Check that item exists before using it
We're actioning the change of claim status outside of any block that
checks the $item exists. As such we'll want to add that check in here.
I did consider that this should live inside AddIssue, but on reflection
the librarian may want to not proceed with the issue given other return
values from the CanBookBeIssued call, but you still want the
AutoClaimReturn to fire regardless as you've now found the item.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 30 Apr 2024 14:21:35 +0000 (14:21 +0000)]
Bug 27753: (follow-up) Update logic in AddReturn
The new logic in AddReturn was flawed, we were missing return messages
due to moving the if statement too high and catching more code than
intended.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 19 Mar 2024 16:03:54 +0000 (16:03 +0000)]
Bug 27753: Unit tests
Add unit tests for new logic introduced to C4::Circulation::AddReturn
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Tue, 12 Mar 2024 02:44:05 +0000 (02:44 +0000)]
Bug 27753: Added new system preferences for automatically resolving claims
To test:
1. Configure Claims returned
1. Go to Administration > Authorized Values > LOST
2. Add a new authorized value with value:6 and description:Claims returned
3. Go to Administration > System Preferences
4. Set ClaimReturnedLostValue to 6 and save
2. Check out an item to a patron.
1. Mark the item as claim returned
2. Check the item in.
3. A message stating that the item has been claimed as returned pops up with
an option to resolve.
4. Resolve the claim.
3. Check out the item to the patron again.
1. Mark the item as claim returned.
2. Check out the item to a new patron. Select “Yes, check out”
3. Go back to the previous patron. Notice that their claim was not resolved.
4. Apply the patch.
1. Updatedatabase
2. restart_all
3. Go to the system preferences and set the system preference
‘AutoClaimReturnStatusOnCheckin’ to ‘Returned by patron’
4. Set ‘AutoClaimReturnStatusOnCheckout’ to ‘Found in library’
5. Redo step 2
1. When checking the claim returned item in you will now see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Returned by patron’
6. Redo step 3
1. Upon checking the item out to another patron you will see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Found in library’.
7. Sign off and have a wonderful day!
Sponsored-by: Altadena Library District Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Hammat Wele [Thu, 21 Mar 2024 22:53:26 +0000 (22:53 +0000)]
Bug 36393: Renewal with a specific date does not take the new date due that we pick
When we renew a notice with a specific date and we have to override the limit, the new date due is not the date that we picked
To reproduce
1- Log in to the staff interface
1-1. Make sure you have a ciculation rule that allows you to renew
1-2. set the AllowRenewalLimitOverride system preference to Allow and SpecifyDueDate to Allow
2. Check out the item to a Borrower
5. Access the borrower's account and renew it until the limit is reached and note the due date.
6. Go to Circulation, click Renew
7. Enter the item barcode and choose a due date further than the due date from step 5 and submit
8. Click on Override limit and renew button
---> Note that the new date due is not the date that we picked in step 7
9. Apply the patch
10. Repeat step 6, 7 snd 8
---> Note that the new date due is the date that we picked
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Magnus Enger [Mon, 5 Feb 2024 08:12:29 +0000 (08:12 +0000)]
Bug 35954: Add --status to koha-plack
This adds a --status switch to the koha-plack command.
To test on ktd:
- Copy the script to /usr/sbin, so you run the modified script,
and not the one installed by Koha:
$ sudo cp debian/scripts/koha-plack /usr/sbin/
- Stop and start Plack for kohadev like so:
$ sudo koha-plack --stop kohadev
$ sudo koha-plack --start kohadev
And make sure this reports the correct status, both when Plack
is running and when it is not running:
$ sudo koha-plack --status kohadev
- Make sure --status is mentioned here:
$ sudo koha-plack --help
- See https://wiki.koha-community.org/wiki/Testing_man_pages for
details on how to check the manual page for the command
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jacob O'Mara [Mon, 8 Apr 2024 08:50:37 +0000 (09:50 +0100)]
Bug 22740: Write unit tests for automatic lost status switching
This patch adds the unit tests for the new system preferences that will
automatically change an items lost status to an authorised value defined
in these preferences on payment or write off of outstanding balance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jacob O'Mara [Wed, 27 Mar 2024 14:58:13 +0000 (14:58 +0000)]
Bug 22740: Automatically change lost status when item is paid for
This patch implements two new system preferences, "UpdateItemLostStatusWhenWriteOff" and "UpdateItemLostStatusWhenPaid" that allow you to specify the status to change an item to when the outstanding balance of a lost item is paid or written off. These preferences are tied to the LOST authorised values set.
Test Plan:
- Set one of the system preference to any of the available values
- Set an item as lost
- Make a manual invoice for your desired user and assign it to the barcode of the above item
- Save and Pay
- Select Pay/Write Off depending on the system preference you selected above
- Pay
- Note that the status of the item has changed to the status you set with the system preference
- Repeat for all values of both system preferences
- Check that when the system preference is left blank and no option is chosen, the lost status does not update.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the new log actions, related to restrictions, to the log
viewer.
To test:
0. Set BorrowersLog to 'Log'
1. Pick a patron
2. Add a restriction and identify it's id, maybe using the DB:
$ ktd --shell
k$ koha-mysql kohadev
> SELECT * FROM borrower_debarments;
3. Run [1]:
k$ perl -MKoha::Patron::Debarments \
-e 'Koha::Patron::Debarments::ModDebarment( { borrower_debarment_id => 195, comment => "potato" } );'
4. Visit the log viewer.
=> SUCCESS: You can filter on 'Create restriction', 'Modify restriction'
and 'Delete restriction', things are displayed correctly.
[1] There's the ModDebarment method in the codebase, but I couldn't find
a way to trigger it for testing, so my last resort was to do it from the
CLI, manually. The tests on the previous patches cover the method
anyway.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply the unit tests
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Patron/Borrower_Debarments.t
=> FAIL: The feature is not implemented! Nothing is logged!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 25996: Make AddDebarment() use Koha::Patron::Restriction
This patch makes the AddDebarment() method use the Koha::Object-based
class to ease the next steps. The current codebase makes the feature
fragile otherwise, as adding a new row and then querying for the latest
row of that kind seems risky,
With this approach the result is the same, but we have the
Koha::Patron::Restriction object for using it later in logging.
I opted to return 1 as it does now. The whole module deserves to be
removed in the future but it is out of the scope of this report.
To test:
1. Run:
$ ktd --shell
k$ prove t/db_dependent/Patron/Borrower_Debarments.t
=> SUCCESS: Tests pass
2. Apply this tiny refactoring patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 10 Apr 2024 11:56:01 +0000 (11:56 +0000)]
Bug 36137: Make update_totalissues cron always skip the holds queue
To test:
1. Run the update_totalissues cron, the holds queue is updated.
2. APPLY PATCH, restart services
3. Run update_totalissues cron again, this time the holds queue should always be skipped.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log