One of the embeds refers to suggestions. This table also has
a quantity column.
Test plan:
Verify that Pending Orders table does load now instead of
triggering an internal server error on ambiguous column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 25 Mar 2024 09:46:06 +0000 (09:46 +0000)]
Bug 36018: (follow-up) Do not rely on assumed correct quantities
Now filter_by_active checks quantities, we should ascertain that
our test data is correct, not leaving it to random values from
TestBuilder.
Test plan:
Run t/db_dependent/Koha/Acquisition/Order.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 15:20:23 +0000 (15:20 +0000)]
Bug 36018: $orders->filter_by_active should check quantityreceived
An active order that has no items to receive any more is actually
not very active anymore :)
Test plan:
Run t/db_dependent/Koha/Acquisition/Orders.t
Enable OPACAcquisitionDetails.
Add order on basket for new biblio. Check that opac-detail does not
yet count the item as on order (since status is still new).
Close basket. Check opac-detail again. Should count it now.
Reopen basket. Cancel line. Check opac-detail again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 14:39:00 +0000 (14:39 +0000)]
Bug 36018: biblio->active_orders should be ->uncancelled_orders
Active orders are more than just not cancelled. See filter_by_active
in Koha::Acquisition::Orders. They are still in the acq process; we
still need to receive items on those orders.
When we cancel and want to delete a biblio, we should check for not
cancelled orders (broader than active orders as in Orders.pm).
Test plan:
Git grep active_orders.
Run t/db_dependent/Koha/Biblio.t
Run t/db_dependent/Koha/Acquisition/Order.t
Add two order lines in a basket referring to same biblio. Try to
cancel with delete biblio. Should not be possible.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 12:34:50 +0000 (12:34 +0000)]
Bug 36018: Rename orders->filter_by_current
Current is a bit misleading here. It means the ones that are not
cancelled.
We already use the filter_out_etc naming schema. So in harmony with
that, we switch it to filter_out_cancelled.
Test plan:
Run t/db_dependent/Koha/Acquisition/Order.t
Run git grep -l '::Orders' | xargs grep filter_by_current
* All occurrences should be related to Recalls, not Orders.
Go to acqui/basket.pl. Delete a whole basket who has some active
and some cancelled lines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Thu, 25 Jan 2024 14:59:32 +0000 (14:59 +0000)]
Bug 35907: Add ability to log all custom report runs with or without query
Because of the way Koha::Logger has been used to log to different categories based on the interface and caller, it can be extremely hard to log all of a particular log statement to one place.
For custom report runs, the category is plack-intranet.C4::Reports::Guided when run from the web interface, cron.C4::Reports::Guided when run from runreport.pl, and plack-intranet.C4::Auth when run from svc/report.
We should add a more standardized report run log, both with and without the full query, so that administrators can log all report runs to a centralized location. If an administrator were to need the "point of entry" for reports, it is easy to include via parameters in PatternLayout.
Test Plan:
1) Apply this patch
2) Modify your log4perl file, add the following:
3) Restart all the things!
4) Run a report somehow:
CLI: ./misc/cronjobs/runreport.pl 1
API: /cgi-bin/koha/svc/report?id=1
Web: /cgi-bin/koha/reports/guided_reports.pl?reports=1&phase=Run this report
5) Note the report runs are logged to /tmp/report-time.log and /tmp/report-query.log
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Mon, 5 Feb 2024 10:20:04 +0000 (10:20 +0000)]
Bug 26567: (follow-up) Update label and add check for RoutingSerials
The system preference RoutingSerials controls if the routing list
feature is available in the staff interface or not. If routing lists
are deactivated, the search option should not show.
Also updated the label to read: "Has routing list"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
danyonsewell [Wed, 20 Dec 2023 04:15:06 +0000 (04:15 +0000)]
Bug 26567: Allow to limit subscription search to subscriptions with routing lists
Adds a search option to the advanced search in the
serials module that allows to limit search on subscriptions
with routing lists.
Test plan:
1. Apply this patch
2. Create two subscriptions, one with a routing list and one without
3. Navigate to Serials home and tick the checkbox labeled "Search routing lists only:"
4. Confirm that the only search result to appear is the subscription you added the routing list to
5. Run unit tests: prove t/db_dependent/Serials.t
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Perltidied changes to make QA test tools pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 9 May 2024 12:34:06 +0000 (13:34 +0100)]
Bug 36757: (QA follow-up) Fix for action on different triggers
This patch updates the 'title' and 'comment count' links to action the
same ticket detail/update modal as the 'details' button.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Paul Derscheid <paulderscheid@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 10 May 2024 12:36:25 +0000 (13:36 +0100)]
Bug 34655: (QA follow-up) Tidy the file
As we're already updating whitespace over almost the entire file, we may
as well go and tidy the whole thing too and add the /* keep tidy */
flag. (I checked for conflicts with existing bugs.. there's bug 20930
which will need a rebase, but it will already conflict and need a rebase
and is currently FQA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 10 May 2024 08:33:26 +0000 (10:33 +0200)]
Bug 34655: Prevent selenium/system_preferences_search.t to fail randomly
Removing this JS code from document.ready.
The script tag is at the end of the DOM and there is no good reasons (at
least I didn't find any) to wait for the whole document to be ready
before executing the JS code.
It made the selenium tests selenium/system_preferences_search.t to fail
randomly with:
# Failed test 'The first "Policy" section (under "Accounting") is currently expanded'
# at t/db_dependent/selenium/system_preferences_search.t line 63.
# got: undef
# expected: 'expanded'
# Looks like you failed 1 test of 6.
Because we set the class in this JS code and selenium won't wait for it
to finish before starting running the tests.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Thu, 21 Mar 2024 08:25:08 +0000 (09:25 +0100)]
Bug 36380: Add filter value on patron statistics report summary
Test plan:
1) Go to reports and select "Patrons"
2) Select some filters (patron category, library,..) and run it
3) Normally you will see filters selected but with blank value like
"branch code = "
4) Apply this patch
5) Refresh
Matt Blenkinsop [Wed, 8 May 2024 14:29:36 +0000 (14:29 +0000)]
Bug 34788: (QA follow-up)
This patch fixes a few things:
1) The blue dialog box now clears when navigating away from the page
2) The background job now uses skip_record_index to avoid queuing indexing jobs for every new biblio and instead queues one job at the end
3) Large files that get chunked now successfully create linked biblios if requested
4) Title matching rules have been expanded to check the package ID so that we can have duplicate titles in different packages
5) A link to the package is now included on the job report page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Tue, 30 Apr 2024 10:27:48 +0000 (10:27 +0000)]
Bug 34788: Allow import of file with additional columns
This patch allows a file with additional columns to be imported. When the file is submitted, the system will enqueue the background job and send back information to the UI that certain columns have been ignored. The data will stil l import as normal but only the standard KBART columns will be parsed and imported
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 17 Apr 2024 14:22:29 +0000 (14:22 +0000)]
Bug 34788: Make biblio creation optional
This patch rebases in the changes from bug 36618 to make biblio creation optional
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 19 Oct 2023 16:12:58 +0000 (16:12 +0000)]
Bug 34788: Allow for import of CSV files
This commit allows CSV files to be imported alongside TSV files.
It also adds some performance improvements relating to the max_allowed_packet and the matching of titles, as well as some small bugfixes and unit test changes
Test plan:
1) Enable the ERM module
2) Navigate to E-resource management > eHoldings > Local > Packages
3) Create at least one package
4) Navigate to E-resource management > eHoldings > Local > Titles
5) There should be a button for "Import from KBART file"
6) Click this button
7) Select the package that you created from the dropdown and then choose your KBART file using the "Choose file" button. I have attached some example files to the bug but feel free to use your own if you have them.
8) Click Submit
9) If your file is a valid file, a background job will be queued, if not then a warning will display showing what is incorrect in your file
10) To test the file format warning, edit your file and add a random column heading into the file e.g. test_column. When you upload it, the warning should show that an invalid column "test_column" has been detected
11) Click on the background job. (If you have uploaded a very large file, the system will chunk the file into smaller pieces and create multiple background jobs)
12) It should display a progress bar followed by a report and any error messages
13) Navigate to E-resource management > eHoldings > Local > Titles and you should see your new titles.
14) Run the unit test: prove t/db_dependent/Koha/BackgroundJob/ImportKBARTFile.t
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Mon, 16 Oct 2023 10:45:25 +0000 (10:45 +0000)]
Bug 34788: Add a relationship to a package for the imported file
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:39:45 +0000 (12:39 +0000)]
Bug 34788: Add unit test
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:36:40 +0000 (12:36 +0000)]
Bug 34788: Add a background job to import a KBART file
This patch adds a background job that will import a KBART file
Sponsored-by: UKHSA Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:35:08 +0000 (12:35 +0000)]
Bug 34788: Add Vue components, api client and navigation route
This patch adds a new component to handle the file import, a route to that component and the API client route needed to access the API
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:34:06 +0000 (12:34 +0000)]
Bug 34788: Add an API endpoint to import a KBART file
This patch adds the endpoint needed to queue an import_from_kbart_file background job
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35925: Adjust default purchase suggestion notices to use TT
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Set syspref EmailPurchaseSuggestions to "email address of library"
4. Under Administration > Libraries, enter an email address for at least
one library
5. Go to "my account", and enter a Primary email and Phone number
6. Go to the Acquisitions module > Suggestions page
7. Click "New purchase suggestion", and fill in values for, at minimum:
Bibliographic information:
Title
Author
Copyright date
ISBN/ISSN
Publisher
Publication place
Collection title
Document type
Reason for suggestion
Notes
Acquisition information:
Library (set to the library you entered an email for in step 4)
Copies
8. Submit the suggestion
9. Set the suggestion status to "Rejected"
a. Check the checkbox next to the suggestion
b. Set the "Mark selected as" drop-down (below the table) to Rejected
c. Select a value for the "Reason" drop-down
d. Click the Submit button
10. Set the suggestion status to "Accepted" (as above)
11. Set the suggestion status to "Ordered" (as above)
12. Return to "my account" and open the Notices tab
--> There should be notices suggestion declined, suggestion accepted,
suggestion ordered, and (depending on settings) new suggestion*
13. Open each notice, and confirm the all information was filled in
correctly
* New suggestion will be there if you're using default KTD settings/data
and logged in as the root user. If it is not there, query the database
(by command line or SQL report) to see the generated notice text:
SELECT * FROM message_queue WHERE letter_code = 'NEW_SUGGESTION'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36106: Adjust DUE and PREDUE notices to use TT
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Item due:
- Check SMS
- Check Email
- Leave Digests only unchecked
Advance notice
- Select 1 day in advance
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Go to the checkout tab for that patron
6. Set a custom due date for today and check out an item
7. Set a custom due date for tomorrow and check out another item
8. Run the cron job to generate notices:
misc/cronjobs/advance_notices.pl -v -c
9. Open the Notices tab on that patron's account
--> The patron should have four notices:
Item due reminder (one for SMS and one for email)
Advance notice of item due (one for SMS and one for email)
10. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Hold filled:
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Leave SMS number and all email address fields blank for that patron
6. Place a hold for that patron
7. Check in an item to fill the hold
8. Open the Notices tab on that patron's account
--> The patron should have a Print "hold filled" notice, since they
don't have an email address or SMS number in the system
9. Add a Primary email and SMS number to the patron account
10. Place another hold for that patron
11. Check in an item to fill the hold
12. Go back to the Notices tab on that patron's account
--> The patron should now have Email and SMS "hold filled" notices as well
13. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36113: Adjust default RENEWAL notice template to use TT
Test plan:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable the system preference RenewalSendNotice
4. Check an item out to a patron
5. Edit that patron:
a. Enter a value for Primary email
b. Set messaging preference to enable email notices for Item
checkout and renewal
6. Renew the checked-out item
7. Check the patron's Notices tab for the Item renewal notice, and
confirm that the notice is correct
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Find a patron and make sure their account contains values for
all of the following fields:
First name
Surname
Card number
Phone
Address
Address 2
City
Zipcode
Email
4. Place a hold for this patron, specifying a hold note
5. Check in an item to fill the hold and click "Confirm and print slip"
6. Confirm that all information on the hold slip is correct
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36608: Adjust TO_PROCESS and AVAILABLE to use TT
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Go to "my account", and enter a Primary email
4. Under Administration > Libraries, enter an email address for at least
one library
5. Add the demo user (koha) as the owner of the Main Fund
a) Go to the Acquisitions module
b) Click on Main Fund
c) Click the Actions button at the end of Main Fund row > click Edit
d) Click "Select owner"
e) Search for "koha"
f) Click the Select button
g) Click Submit
6. Click "Suggestions" on the left side of the page, and click "New
purchase suggestion"
7. Fill in values for, at minimum:
Bibliographic information:
Title
Author
Acquisition information:
Library (set to the library you entered an email for in step 4)
Fund (set to Main Fund)
9. Submit the suggestion
10. Run the cron job to generate TO_PROCESS notification email:
misc/cronjobs/notice_unprocessed_suggestions.pl -v -c --days=0
11. Set the new suggestion to "Accepted"
a) Check the checkbox next to the new suggestion
b) Below the table, set "Mark selected as" drop-down to "Accepted"
c) Click Submit
12. Create an order from the purchase suggestion
a) Return to the Acquisitions homepage
b) Leave the Vendor field blank and click Search
c) Next to the sample basket (My Basket), click "Add to basket"
d) Click "From a suggestion"
e) Click "+ Order" next to the suggestion
f) Make sure there are values for all required item fields
g) Click "Add item"
h) Click Save
13. Close the basket and receive the order
a) Click "Close basket" and click "Yes, close"
b) Click "Receive shipments"
c) Enter a number in "Vendor invoice" and click Next
d) Check the checkbox next to "My Basket" and click "Receive
selected" button
e) Check the checkbox under "Receive?" in the Items table
f) Click Confirm
14. Return to "my account" and open the Notices tab
--> There should be (among others) notices for "A suggestion is ready to
be processed" and "Suggested purchase available"
15. Open each of the above two notices, and confirm all the information
was filled in correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 9 May 2024 22:45:45 +0000 (15:45 -0700)]
Bug 36823: Switch database schema links in Reports from master to main
Test plan:
1. Reports > click Database schema link, verify it gets a 404 not foun
2. Reports > Use saved > click Database schema link, verify 404
3. Apply patch
4. Reports > click Database schema link, verify it loads as main
5. Reports > Use saved > click Database schema link, verify it loads
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 9 May 2024 23:31:56 +0000 (16:31 -0700)]
Bug 36824: Fix conversion of __VERSION__ in system preferences to use main rather than master
Test plan:
1. Administration > search system preferences for the words database columns
2. Click the links to schema.koha-community.org, note that they 404 with
/master/ in the URL
3. Apply patch, reset_all
4. Search again, click the links, note that they load successfully with /main/
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jan Kissig [Tue, 23 Apr 2024 18:19:05 +0000 (20:19 +0200)]
Bug 36676: SIP2 drops connection on unknown patron id in fee paid message
When sending a fee paid message to SIP2 with an unknown patron id it will respond with an empty response followed by dropping the connection to a client.
Test plan:
a) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 124447FT00USDBV0.01|AO|AA2352900100046|ACterm1|
Use of uninitialized value $data in concatenation (.) or string at /usr/share/koha/bin/sip_cli_emulator.pl line 355, <GEN0> chunk 1.
READ:
b) apply patch
c) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 125602FT00USDBV0.01|AO|AA2352900100046|ACterm1|
READ: 38N20240423 125602AO|AA2352900100046|AFInvalid patron barcode.|
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 12:25:49 +0000 (13:25 +0100)]
Bug 35812: Fix search URL aliases in Plack Apache config
Mimic missing stuff from apache-shared-opac.conf into apache-shared-opac-plack.conf, where /search and /opac-search.pl aliases were missing.
Note that while RewriteRule applies before reverse proxy directives and works, ScriptAlias applies purely to standard cgi perl scripts, meaning it didn't apply there.
Now it's mimicked analogously to how /index.html is configured.
This patch fixes an issue where someone might have just a reverse proxy to Plack configured without native Perl scripting, where this URL would then otherwise be failing.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 09:20:17 +0000 (10:20 +0100)]
Bug 35812: specify canonical URL for the main page
Currently main page can be accessed by:
- /
- /index.html
- /cgi-bin/koha/opac-main.pl
This specifies the canonical link for all of them to be "/", to aid search engines in assessing what's url to put in the index.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 09:16:06 +0000 (10:16 +0100)]
Bug 35812: Add canonical URL for biblio details page
This adds a nice canonical URL for search engines to use. Will prevent duplicates with different URL query parameters from getting indexed separately, will also prevent search engine confusion when opac-search.pl redirects to opac-detail.pl when there's just one result.
Should result in prettier/simpler URLs in the search engines too, plus removal of constant warnings in Google Search Console and other tools.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 08:25:37 +0000 (09:25 +0100)]
Bug 35812: add noindex attribute to search result pages in OPAC
This will prevent search engines from putting the search results pages into their indexes, to prevent cluttering of the search results and give better visibility to the actual bibliographic records' pages.
Note that "noindex" is separate from "nofollow", meaning that the search engine is allowed to get and process the search results page and extract ("follow") further links from it, such as links to biblio records, which is exactly what we want.
This approach is better to the sitemaps, which search engines are free to choose whether to use or not, based on multiple factors such as the size of the page. In practice for small pages Google will just not download them at all, meaning that indexing by following links around is the only way the indexer will extract any links.
Note that for this to work properly, you must NOT block the affected pages in your robots.txt file (they're not blocked by default).
Also, this patch moves "cssinclude" block in opac-results.tt inside of <head>, because in all other templates it's inside, meaning its current positioning is a small mistake I fixed while at it.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Raphael Straub [Thu, 2 May 2024 09:19:32 +0000 (09:19 +0000)]
Bug 36503: (follow-up) Use the call method of Koha::Plugins
This removes the option to call multiple plugins in a prioritized order,
but this is not needed if there is only one plugin that uses this hook.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36503: (follow-up) Move the plugin hook to include the domain
This allows the plugin to read/change the domain.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Raphael Straub [Thu, 28 Mar 2024 12:31:15 +0000 (12:31 +0000)]
Bug 36503: Add a plugin hook after user authentication
This plugin hook allows to change patron data or define the patron
based on the authenticated user.
To test: Run
prove t/db_dependent/Koha/Auth/Client.t
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Thomas Klausner <domm@plix.at> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle Hall [Mon, 26 Sep 2022 16:23:33 +0000 (12:23 -0400)]
Bug 31627: Add ability to embed the letter id in outgoing email notices
It can be useful to know exactly what template was used to generate a notice. To further this end, it would be useful be able to send the letter id as part of any emails sent out if there is a letter template associated with the message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Generate an email notice like a checkout notice
4) Inspect the email headers, note the new X-Koha-Template-Id and
X-Koha-Message-Id headers!
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Thu, 21 Mar 2024 15:20:24 +0000 (16:20 +0100)]
Bug 36388: Mouse operation does not work in draggable fields in authority editor
When using the authority editor in Firefox, it is not possible to set
the cursor or select text from the text field.
This patch mimics the corrections made in bug 35425 for biblio editor.
Test plan:
==========
1. Start editing an existing authority record and try to put the cursor
with the mouse in the middle of the content of any subfield or to
select text with the mouse. It should not be possilbe.
2. Apply the patch (reload plack etc.).
3. Repeat p. 1 - everything should work as expected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The existing code for "Holds to place (count)" sets the input field's
maxlength to remaining_holds_for_record, which does not do what we want
and makes the field unusable when the circulation rules allow unlimited
holds. Better to remove it.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36775: Allow multiple holds on record when holds per record is unlimited
To test:
1 set Holds Per Record to Unlimited
2 confirm hold placement interface does not include "Holds to place (count)"
3 apply patch, restart all
4 reload hold placement interface, confirm it does include "Holds to place (count)"
5 set Holds Per Record to 2
6 confirm Holds to place shows when placing a first hold for a patron, but not when placing a second
7 set Holds Per Record to 1
8 confirm Holds to Place does not show
9 sign off and eat a nice snack
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36791: Koha explodes when trying to edit an authority rec. with an invalid authid
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 2 May 2024 23:19:17 +0000 (16:19 -0700)]
Bug 27363: Restore temporary selection of Z39.50 targets throughout multiple searches
The advanced editor currently saves which Z39.50 servers are selected
in local storage using the index in the sorted array of servers, and
then misreads them back as though they were server_ids. We want them to
be server_ids, since that's immutable and the index can change with
changes in rank or server name.
We use the data-server-id property in the HTML more often as a server_id
than as the index that's currently stored there, so this patches
switches it back to be the server_id, and in the one place we would use
the index, instead uses Array.find to just get the server object instead
of referencing it by index.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to enable
2. Administration - Z39.50 Servers, for NATIONAL LIBRARY OF FRANCE
uncheck "Preselected"
3. To be sure you don't have confusing saved preferences, open
Firefox's Developer Tools, in the Storage tab open Local Storage and
select your URL
4. In the row for cateditor_preferences_{your Koha user id}, if there
are any values for selected_search_targets, delete them so you
have "selected_search_targets":{}
5. Open the advanced editor, and click "Advanced »" in the search box
6. You should have Local catalog unchecked, LIBRARY OF CONGRESS checked
because it is preselected, and NATIONAL LIBRARY OF FRANCE unchecked
7. Toggle each checkbox so Local catalog and France are selected, and
LoC is unselected.
8. In a new broser tab, open the advanced editor, and click "Advanced »"
9. You will see Local catalog unchecked, LoC checked, and France
unchecked.
That's the bug.
10. Apply patch, open the advanced editor in a new tab, click "Advanced »"
11. Toggle the checkboxes so Local catalog and France are selected, and
LoC is not selected.
12. Open the advanced editor in another new tab, click "Advanced »"
13. You should see what you just set, Local catalog and France checked,
and LoC unchecked, That's the correct behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Tue, 7 May 2024 15:46:23 +0000 (15:46 +0000)]
Bug 36804: Fix clear filter
1) Visit serials and click "New subscription":
http://localhost:8081/cgi-bin/koha/serials/serials-home.pl
2) Enter '112' on the record input and '1' on the vendor input. Click "Next"
3) 'First issue publication date' -> Enter some date in the past
4) 'Frequency' -> Enter '2/day'
5) 'Subscription start date' Same as step 3)
6) 'Subscription end date' Some date in the future
7) 'Numbering pattern' -> Enter 'Number'
8) Click 'Test prediction pattern'. Click 'Save subscription'
9) On the left side menu -> Click "Serial collection". Click the yellow button 'Edit serials'
10) On the first serial, edit the status to 'Late'. Save.
11) Visit serials claims:
http://localhost:8081/cgi-bin/koha/serials/claims.pl?supplierid=1
12) Input some dates in "From" and "To"
13) Click 'Clear filter'. Notice it doesn't work.
14) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:22:13 +0000 (14:22 +0000)]
Bug 34263: (QA follow-up): Use flatpickr .clear instead
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 13:09:39 +0000 (16:09 +0300)]
Bug 34263: Suspending holds consecutively populates previously used date falsely
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:07:25 +0000 (14:07 +0000)]
Bug 36774: Remove wrapper if already exists
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 11 Jan 2024 11:53:42 +0000 (11:53 +0000)]
Bug 34360: Get distinct biblionumber
This fixes the problem noted in the bug:
[WARN] DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /usr/share/koha/Koha/Objects.pm line 421
We are taking a list of items, assuming the scenario is that these are from a single biblio and possibly some host_items, then searching and ordering conditionally on whether the biblio is a serial.
Current code gets the first biblio from the list - this patch adds a 'DISTINCT' to the results ebfore fetching the column
To test:
1 - Find a biblio in the staff interface
2 - Transfer one of the items a few times
3 - Recreate the issue on the command line:
export DBIC_TRACE=1
perl -e 'use Koha::Items; my $items = Koha::Items->search({biblionumber=>9})->search_ordered(undef,{ prefetch => ['issue','current_branchtransfers'] }); $items->next'
4 - Note warning:
DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /kohadevbox/koha/Koha/Objects.pm line 426
5 - Apply patch
6 - Repeat 3
7 - Error is gone
Signed-off-by: baptiste <baptiste.bayche@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 30 Apr 2024 12:08:09 +0000 (12:08 +0000)]
Bug 19768: Add "Title notes" tab to OpacSerialDefaultTab preference
This patch adds a "title notes tab" option to the opacSerialDefaultTab
preference.
To test, apply the patch and restart services.
- Go to Administration -> System preferences -> opacSerialDefaultTab.
- There should now be a new options, "title notes tab."
- Set the preference to the new value.
- Go to the OPAC and locate a bibliographic record which is associated
with a subscription and which has data in a 5XX notes field.
- On the bibliographic detail page the "Title notes" tab should be
selected by default.
- Test that the other system preference values still work correctly too.
Sponsored-by: Athens County Public Libraries Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 17 Apr 2024 10:31:27 +0000 (10:31 +0000)]
Bug 36618: Make biblio creation optional for ERM local titles
This patch makes biblio creation on local title creation optional.
Test plan:
1) Navigate to the local title creation form
2) Create a title and leave the "Create record" box unchecked
3) Submit the form
4) Search the catalogue for the title you have just created - no biblio result will be available
5) Repeat steps 2 - 3 but this time check the box to create a record
6) You should now be able to find a record in the catalogue for the title you just imported
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 26 Jan 2024 18:14:04 +0000 (18:14 +0000)]
Bug 36582: Add option to set library, desk, and register from user menu
This patch adds an expandable "panel" in the user dropdown menu in the
staff client. Expanding the panel will load the form from
set-library.pl, including library, desk and register options if present.
The patch moves the contents of desk_selection.js and
register_selection.js into staff-global.js so that the functionality is
available on every page.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Test plan stolen from Bug 36572:
1. Have 3 staff accounts to test:
-STAFF A: superlibrarian
-STAFF B: loggedinlibrary permission
-STAFF C: no loggedinlibrary or superlibrarian permission
2. Enable 'UseCirculationDesks' and create some desks. (Admin >
Circulation desks)
3. Enable 'UseCashRegisters' and create some registers ( Admin > Cash
registers)
4. Use STAFF A ( superlibrarian ) and make sure you can change branch,
desk and register.
5. Use STAFF B ( loggedinlibrary permission ) and make sure you can
change branch, desk and register.
6. Use STAFF C ( no loggedinlibrary or superlibrarian permission ) and
make sure you can change branch, desk and register.
7. Each time you change you should be redirected to the page you were
previously on.
8. Turn off UseCirculationDesks, make sure everything still works.
9. Turn off UseCashRegisters, make sure everthing still works.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 3 May 2024 17:12:26 +0000 (17:12 +0000)]
Bug 35648: (follow-up) Remove sorting from transport columns
There's not a simple way to handle sorting of a column containing only
checkboxes, so I think it makes sense to remove the sorting unless
someone feels strongly about it being necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 22 Mar 2024 12:47:22 +0000 (12:47 +0000)]
Bug 35648: (follow-up) Clear table filter before submitting
This patch takes advise from elasticsearch-mappings.js and adds an
onsubmit event to clear any DataTables filter before submitting. This
should prevent hidden fields from being overwritten.
To test, filter the table and make a change to one of the visible rows.
After submitting, confirm that the previously-hidden rows retain the
same settings as before.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 2 Jan 2024 20:11:28 +0000 (20:11 +0000)]
Bug 35648: Allow sorting of patron categories in Overdue notice/status triggers
This patch adds a basic DataTables configuration to the table of patron
categories on the Overdue notice/status triggers page. The table can be
sorted by patron category and can be filtered.
To test, apply the patch and go to Tools -> Overdue notice/status
triggers.
- Confirm that the table of patron categories is sorted by default by
patron category
- Other columns should not be sortable
- You should see a search field above the table which works to filter by
patron category.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 2 May 2024 13:19:05 +0000 (13:19 +0000)]
Bug 36755: Atomicupdate file
Test plan, k-t-d:
1) Apply patches.
2) Run the following SQL and save the output of each:
SHOW CREATE TABLE pseudonymized_borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types_branches;
SHOW CREATE TABLE borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types;
3) Run updatedatabase
4) Run the SQL queries again, compare the output of each with the previous output before updatedatabase.
5) Make sure the only diff between the two is VARCHAR(10) -> VARCHAR(64)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 2 May 2024 13:19:27 +0000 (13:19 +0000)]
Bug 36755: Update UI input element
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 6 May 2024 03:42:57 +0000 (03:42 +0000)]
Bug 32256: Use a new SCOBatchCheckoutsValidCategories syspref
So that this functionality can be controlled separately from staff-side batch checkouts
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 1 May 2024 14:19:09 +0000 (15:19 +0100)]
Bug 32256: (QA follow-up) Tidy sco-main.pl
This tidies the whole file as the patchset touched so much that we
basically needed to tidy all to make the QA scripts clean.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This enhancement modifies the self-checkout script to better handle 'impossible' and 'needs confirmation' checkout messages.
Test with a combination of barcodes that would invoke these messages, for example:
- impossible: barcode doesn't exist
- impossible: barcode is for a 'notforloan' item type
- impossible: debt
- needs confirmation: barcode already checked out, i.e. confirm renewal
Include barcodes that should have successful checkouts too.
Also, test with the following sysprefs:
- BatchCheckouts: enabled
- BatchCheckoutsValidCategories: none selected
Confirm SCO does not have a multi-line text area for more than one barcode, and doesn't accept more than one barcode.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 32256: Display barcodes not checked out in batch
This patch encourages the user to check out certain items individually if they fail to be checked out in a batch.
This way they will be presented with more useful error messages.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - Find three barcodes
3 - log into SCO with a user in category Patron, paste the barcodes separated by newlines and submit. confirm one item is succcessfully checked out and the other two barcodes are listed in the pop-up, encouraged to try checking out individually.
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 32256: (follow-up) Use correct patron category
This patch ensures we check the categorycode of the patron trying to issue the items is valid (based on BatchCheckoutsValidCategories), rather than the categorycode of the AutoSelfCheckAllowed patron.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - confirm AutoSelfCheckAllowed is allowed and contains the username and password for the self_check user. Confirm self_check user is in category Staff
3 - log into SCO with a user in category Patron, confirm you can only check out 1 item at a time
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Sponsored-by: Koha-US Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Tue, 7 Nov 2023 03:18:02 +0000 (03:18 +0000)]
Bug 32256: Add message to SCO that batch checkouts works for checkouts only
Not yet handling renewals, returns, or items that are impossible to check out.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 28 Aug 2023 04:58:26 +0000 (04:58 +0000)]
Bug 32256: Enable batch checkout using self-checkout
This patch allows more than one item to be scanned and processed at once in Koha's self-checkout module. The items in the batch will still be handled one-by-one, so if any item in the batch requires confirmation (i.e. to be renewed or returned) or is impossible to check out, the process will stop at that item. Any items earlier in the list will be processed, but any items coming after in the list will be ignored. This feature uses the existing BatchCheckouts and BatchCheckoutsValidCategories system preferences to determine if batch checkouts should be allowed.
To test:
1) Open the staff interface. Go to Koha Administration -> Global system preferences. Search for "BatchCheckouts". Confirm BatchCheckouts syspref is disabled, and no categories are selected for the BatchCheckoutsValidCategories syspref.
2) In another tab, open the OPAC self checkout (found out OPACBaseURL/cgi-bin/koha/sco/sco-main.pl) and log in
3) Confirm the self-checkout works as normal for checking out, returning or renewing one item at a time
4) Go back to the staff interface tab (you may need to log back in). Enable the BatchCheckouts syspref but leave the BatchCheckoutsValidCategories syspref empty.
5) Refresh the OPAC self checkout tab. The barcode input field will now be bigger to support a list of barcodes. Enter a list of barcodes separated by newlines and Submit.
6) Only the first barcode should be processed. This is because no categories are valid for BatchCheckouts.
7) Go back to the staff interface tab (you may need to log back in). Select at least your patron category for the BatchCheckoutsValidCategories syspref and Save.
8) Refresh the OPAC self checkout tab. Enter a list of barcodes separated by newlines and Submit. Confirm all valid items are checked out as expected.
9) Test with a few items that are notforloan or would not be valid checkouts. Confirm they are not checked out, but other valid items in the batch are checked out successfully.
10) Test with a batch where one of the items is already checked out to the patron. The batch should get blocked at this item as the self-checkout asks for confirmation.
11) Test with both renewing and returning of items that are already checked out to the patron. This will only work with one item at a time and later items in the list will be ignored.
Sponsored-by: Koha-US Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 7 May 2024 14:55:34 +0000 (14:55 +0000)]
Bug 31097: (follow-up) Restructure messages a bit
This patch updates the patron restrictions markup and splits up some
strings to (hopefully) improve the translation process. The patch also
fixes a bug in a previous patch which prevented manual restrictions from
being displayed if there was also a restriction added by
overdue_notices.pl.
Test that all three kinds of restrictions display correctly:
- Restrictions added by overdue process
- Manual restriction without an expiration date
- Manual restriction with an expiration date
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Philip Orr [Thu, 18 Apr 2024 15:41:33 +0000 (15:41 +0000)]
Bug 31097: Added more restrictions info
Added more info to the restrictions message
in circulation as well as to the OPAC display
in "Your account" and to the display of
restriction messages when trying to place a
hold in the OPAC.
To Test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
4a. Make sure that you add some with an
expiration date and some without
4b. Make sure you add some with a comment and
some without
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed and not all info
is displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
10. Notice the colon is only displayed
if there is a comment
11. Notice the expiration date is also displayed
12. Open the OPAC and log in with that user
(or if you want to log in with your own user:
make sure they have all the restrictions
mentioned above as well)
13. Go to "Your account" in the OPAC
14. Notice the display of restrictions
15. Try to place a hold on any record
16. Notice the display of restrictions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Philip Orr [Thu, 18 Apr 2024 09:37:59 +0000 (09:37 +0000)]
Bug 31097: Display restriction types
This patch changes the display of patron
restrictions in checkout and patron details
pages to show the restriction type for each
restriction. It also changes the display so
each restriction is shown on a newline.
To test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Place a hold on any bib record
2. Cancel the hold by clicking the trash can icon next to it
--> Note that there is an empty red page section in the modal
3. Apply patch and refresh the page
4. Repeat steps 1-2
--> No empty red page section
5. Confirm that the test plan from bug 33174 still works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 11:27:06 +0000 (14:27 +0300)]
Bug 36534: Batch operations when using limit in report
When report results number exceeds the result per page limit, batch
operations link reads "Batch operations with (page limit) records" even
if there are more or less shown records (more when using limit in SQL or
less in the last page of result). This patch fixes the link text to
actual shown records.
To test:
1) Create a report of items with a limit of e.g., 26.
2) Run report.
3) See that number of results shown exceeds 20 but the link says "Batch
operations with 20 visible records".
4) See that the second page shows 6 results but the link is still for 20
records.
5) Apply patch.
6) Run report again.
7) See that the link texts will show correctly 26 records on the first
page and 6 records on the second.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 7 May 2024 08:45:56 +0000 (09:45 +0100)]
Bug 36757: Sync concerns tables
This patch re-syncs the two catalog concerns display tables markup. We
add the 'Title' field into the catalog/detail version of the table and
split the columns settings so you can control the table distinctly from
the cataloguing module version so we can hide 'title' by default in the
details display tab.
This results in the table matching the display from the cataloguing
module page, i.e. the assignee and status detail displays.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log