Marcel de Rooy [Sat, 27 Feb 2016 13:40:44 +0000 (14:40 +0100)]
Bug 13871: [QA Follow-up] Adjust Patron Info Request
Conform QA comment, Patron Info request is slightly adjusted to be
consistent with changes to Patron Status request.
If the cardnumber is ok and the password is wrong, BL=N is reported but
also add 'Invalid password' in AF.
Additionally, an invalid card number is reported in AF.
Test plan:
[1] Send patron info request for invalid card.
[2] Idem for valid card, no password.
[3] Idem for valid card, good password.
[4] Idem for valid card, wrong password.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
b02aa7c4217ed75c42b95bd6af11a49472737144)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marcel de Rooy [Sat, 27 Feb 2016 13:26:51 +0000 (14:26 +0100)]
Bug 13871: [QA Follow-up] Adjust Patron Status Request
Conform QA comment on Bugzilla, we do this:
[1] Attribute for overdrive mode/invalid credentials is not really needed.
We can always pass a screen message that card or password is invalid.
[2] If the cardnumber is correct and the password is wrong, we should
still honour the request. The bad password is recognized by BLN and
an additional message in AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
a32a5c4e0843ec8e08e8c75118f648cbbfdb762c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mason James [Sun, 22 Mar 2015 23:06:27 +0000 (12:06 +1300)]
Bug 13871 - OverDrive message when user authentication fails
NOTE: apply this patch after the additional perltidy patch
this patch is basically a small work-around to fix some confusing login text,
when users enter incorrect auth details via Overdrive's website
with this option disabled (default) there is no change to SIP's behaviour
to test...
1/ configure your overdrive account to talk to your Koha's SIP service
2/ start Koha's SIP
3/ enter a correct username and correct password in overdrive
see overdrive display '(1) Greetings from Koha' (good)
4/ enter a correct username and *incorrect* password in overdrive
see overdrive display '(1) Greetings from Koha' (bad)
5/ enter an incorrect username in overdrive
see overdrive display '(1)' (badder)
6/ apply patch, enable 'overdrive-mode' in Koha's SIPConfig.xml
example...
---------------------
<accounts>
<login id="kohasip" password="xxxxx" delimiter="|"
error-detect="enabled" institution="YYY" overdrive-mode="1" />
</accounts>
---------------------
7/ restart SIP
8/ enter a correct username and correct password
see overdrive display '(1) Greetings from Koha'
9/ enter a correct username and *incorrect* password
see overdrive display '(1) Invalid patron or patron password'
10/ enter an incorrect username and incorrect password
see overdrive display '(1) Invalid patron or patron password'
http://bugs.koha-community.org/show_bug.cgi?id=1387
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
8637627dc9c99b2f1e47b4748c7e4360dbaac5f1)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mason James [Mon, 23 Mar 2015 01:30:26 +0000 (14:30 +1300)]
Bug 13871: [TITLE_AMENDED] Additional changes
The original perltidy patch from Mason has been amended.
The perltidy itself has been moved to a separate patch with the current
perltidyrc applied.
As noted on Bugzilla, the original perltidy patch included some extra
changes:
[1] You prefix timestamp with Sip
This is not actually needed (it is imported), but if we should prefix it,
we should prefix now with C4::SIP::Sip. But you only changed two
occurrences (out of 26). So I remove these two changes.
[2] You remove the $server parameter from two calls of maybe_add:
A closer look at the remaining code tells me that $server is always
passed to maybe_add for FID_SCREEN_MSG. So this only left me the
current whitespace change.
But at least we documented what we did or did not, and why..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
42e731857d53134f91ecf0099ae6b7c13393166c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marcel de Rooy [Fri, 26 Feb 2016 08:42:13 +0000 (09:42 +0100)]
Bug 13871: Adjusted perl tidy on MsgType.pm
Run perltidy pro=xt/perltidyrc on the file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
a5babb0effb760aa1d0d9de83ce8bb690099678c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marc Véron [Wed, 23 Mar 2016 07:11:49 +0000 (08:11 +0100)]
Bug 16133: Translatability of database administrator account warning
This patch removes sentence splitting of the database administrator warning with
a button styled link.
Additionally, it uses the same wording as in the warning on the 'About' page.
To test:
- Apply patch
- Log in to Staff client as database administration user
- Verify that the wording of the warning is the same as on the About page (Tab
'System information')
- Verify that the link to the patron administration page is styled as a button
and behaves correctly
NOTE: Actually, the category is irrelevant. But I like the improved message.
Categories may or may not be set up at the initial log in.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
e53b80dedf91617f9eecb9defd2d6f5222f03d65)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Mon, 14 Mar 2016 16:41:58 +0000 (12:41 -0400)]
Bug 16027 - Use Font Awesome icons in the professional cataloging interface
The professional cataloging interface uses Glyphicons. They should be
replaced with Font Awesome icons.
I have replaced the "Import record" icon as per the discussion on Bug
15966 about which icon better expresses import vs. export.
To test, apply the patch and go to Cataloging -> Advanced editor.
- Confirm that the icons in the toolbar look correct.
- Click the "Macros" button and confirm that toolbar buttons in the
modal look correct.
- Click the "Advanced" link in the left-hand sidebar and confirm that
the buttons in that modal look correct.
- Click the "Save" button without adding anything to the blank record.
Confirm that the "Missing..." error messages are styled with the
correct icon.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
5fb78052f4e3cd3bb5562fcc2471628438a0fe77)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Wed, 9 Mar 2016 15:27:03 +0000 (10:27 -0500)]
Bug 16025 [Revised] Use Font Awesome icons on item types localization page
The item types localization page uses a Glyphicon. This patch converts
it to a Font Awesome icon.
Also changed in this patch: "Delete" text has been added to the delete
link, and a dummy "href" attribute has been added to the link so that it
triggers the right kind of cursor. The deletion confirmation JavaScript
has been edited to ignore the default click action.
To test, apply the patch and go to Administration -> Item types.
- Edit any existing item type and click the "Translate into other
languages" link.
- If there is not an existing translation, add one. Close the modal
window and click the "Translate into other languages" link again to
redisplay it.
- Confirm that there is a "Delete" link next to your translation which
is styled correctly.
- Confirm that the behavior of the "Delete" link is correct both when
confirming and when canceling.
Revision adds the "actions" class to the table cell with the delete link
to prevent a line break between the icon and the text.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
dfb8982ca79595297c7430243ad90b77e21d8a67)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Aleisha [Sun, 20 Mar 2016 23:37:38 +0000 (23:37 +0000)]
Bug 15861: Isolated 'The' in help files untranslatable
Changes made:
help/reports/reports-home.tt
Line 11: Koha database schema: shows the entire Koha database structure so that you can write effective SQL Queries
Line 12: Koha reports library: lists reports written by Koha users around the world.
help/rotating_collections/rotatingCollections.tt
Line 7: Important: AutomaticItemReturn (system preference) must be set to ..
TEST PLAN
---------
1) Log in to staff client
2) Click 'Reports'
3) Click 'Help'
-- Notice the two lines starting with 'The'
4) Click 'Tools'
5) Click 'Rotating collections' in the Catalog column
6) Click 'Help'
-- Notice the Important has a 'The'
7) Apply patch
8) Repeat steps 2-6
-- Notice the wording has changed to eliminate 'The'
9) Run koha qa test tools
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
b72f9b8c51eb11861b931f193628460e2219a4fc)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mark Tompsett [Fri, 1 Apr 2016 21:59:29 +0000 (17:59 -0400)]
Bug 16191: t/Ris.t is noisy
TEST PLAN
---------
1) prove t/Ris.t
-- very noisy
2) apply patch
3) prove t/Ris.t
-- just one confusing noise.
4) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
5b909a82693d452d233e95d7598092aa5ee14c17)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Wed, 9 Mar 2016 15:02:08 +0000 (10:02 -0500)]
Bug 16023 - Use Font Awesome icons on audio alerts page
The audio alerts management page uses Glyphicons in a few places. This
patch replaces them with Font Awesome icons.
To test, apply the patch for Bug 15886 if necessary and enable
the AudioAlerts system preference.
- Go to Administration -> Audio alerts
- Confirm that icons for "Edit" and "Delete selected" look correct.
- Edit an existing alert and confirm that the "play" button looks
correct and works correctly.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
5d266693edc042c0a2f795588058ae8b3d12da22)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Thu, 17 Mar 2016 13:08:39 +0000 (09:08 -0400)]
Bug 16047 [Follow-up] Software error on deleting a group with no category code
This follow-up take the original patch a little further, making category
name required on the entry form as well. Without a category name there
is no label in the interface when selecting a category. That doens't
make any sense.
Also changed on the group entry form:
- Added "required" attribute to labels on required fields.
- Changed "Update" submit button label to "Submit."
- Added a "Cancel" link.
- Added the "validated" class to the form so that our built-in
validation script will process it (not strictly necessary but makes
the validation appearance more consistent).
Followed test plan, form displays and behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
df127ebad814ad1710b161b85a69d408de95de85)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Aleisha [Thu, 10 Mar 2016 21:49:57 +0000 (21:49 +0000)]
Bug 16047: Making category code a required field on creating a group
This will prevent users from creating a group without a category code,
which causes a software error when you try to delete it
To test:
1) Go to Admin -> Libraries and groups
2) Create new group without category code
3) Attempt to delete the group you just created and notice software
error
4) Apply patch
5) Create new group without category code
6) Notice you now cannot save the group without putting in a category
code
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
577aa86eb96160088c70008bfe85ae2c0820f547)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Aleisha [Sun, 13 Mar 2016 23:40:53 +0000 (23:40 +0000)]
Bug 16029: Hide patron toolbar if patron does not exist
To test:
1) Create a patron, take note of the borrower number
2) Delete the patron
3) Navigate to the page of the patron you just deleted by typing the url (ie /cgi-bin/koha/members/moremember.pl?borrowernumber=X)
4) Confirm that the patron toolbar is not showing on the page
5) The message now has a link that says 'Find another patron?'. Click this link and confirm you are taken to the member home pgae.
Sponsored-by: Catalyst IT
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
1870141874667d854f9b5508c563169baefb2328)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Fri, 18 Mar 2016 13:41:15 +0000 (09:41 -0400)]
Bug 15984 - Correct templates which use the phrase "issuing rules"
This patch corrects two places in the templates where the phrase
"issuing rules" is used instead of "circulation and fine rules."
To test, apply the patch and view the help pages for Administration ->
Circulation and fine rules; and Tools -> Automatic item modification by
age. Confirm that the term "circulation and fine rules" is used instead
of "issuing rules."
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
98a9e30f040661e0a67a594f72abd8ab02cf9ad6)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 12 Feb 2016 11:49:28 +0000 (11:49 +0000)]
Bug 14076: Do not use CGI->param in list context - opac-authorities-home.pl
See bug 15809 for more info on why we should not use CGI->param in list
context.
Note: I have not found any places where several values for the same
params are passed to this script but, just in case, this patch won't
change this ability.
Test plan:
Do an authority search at the OPAC
Test with several values of the form.
Confirm that the results are always the same before and after this
patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
3fa2b10150a9ea2db2897be1246cba3785c55e55)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 12 Feb 2016 11:32:02 +0000 (11:32 +0000)]
Bug 15809: Redefine multi_param is CGI < 4.08 is used
On debian Jessie, the CGI version is >= 4.08
Since this version, the param method raise a warning
"CGI::param called in list context".
Indeed, it can cause vulnerability if called in list context
https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameter
http://blog.gerv.net/2014/10/new-class-of-vulnerability-in-perl-web-applications/
There is a long journey to get rid of these warnings.
First I suggest to redefine the multi_param method when the CGI version
installed is < 4.08, it will allow us to move the wrong ->param calls to
->multi_param without waiting for everybody to upgrade.
The different ways to call these 2 methods are:
my $foo = $cgi->param('foo'); # OK
my @foo = $cgi->param('foo'); # NOK, will raise the warning
my @foo = $cgi->multi_param('foo'); #OK
$template->param( foo => $cgi->param('foo') ); # NOK, will raise the warning
# and vulnerable
$template->param( foo => scalar $cgi->param('foo') ); # OK
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested a call to multi_param with CGI < 4.08.
With reference to the comments on Bugzilla, this workaround is arguable,
but provides a base to move to multi_param. If we come up with a better
solution, it should be easy to adjust.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
94dde6b48d6e20a5260ea49f9b98ec884c2c25b5)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Aleisha [Thu, 17 Mar 2016 22:34:08 +0000 (22:34 +0000)]
Bug 15421: Show 'Duplicate' and 'Schedule' on Reports toolbar
To test:
1) Go to Reports -> Use saved
2) Click 'Show' on the dropdown for any report
3) Confirm that 'Duplicate and 'Schedule' are now on the toolbar and work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
a9d7292a103918ecddcfabc430ea07cdd3513148)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mason James [Fri, 1 Apr 2016 02:56:34 +0000 (15:56 +1300)]
Bug 16184 - Report bor_issues_top shows incorrect number of rows
TEST PLAN
---------
1) Have at least 6 patrons with checkouts and some checkins.
2) Reports -> Patrons with the most checkouts
3) Click 'Submit' (default is 5)
-- more than 5 entries listed.
4) Apply patch
5) Refresh page
-- only 5 entries listed.
6) Run koha qa test tools
NOTE: While this works, I'd be much happier with a refactor
as it would also speed up the report. See comment #5.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
2c68980467009a9d19116440d4f28356707e9e7c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Alex Arnaud [Wed, 30 Mar 2016 14:49:10 +0000 (16:49 +0200)]
Bug 16171 - Show many media in html5media tabs
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
c2f92f68d84753d62880e17e9d1bd19c8b9bff47)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Thu, 24 Mar 2016 02:43:17 +0000 (23:43 -0300)]
Bug 16143: Make opac-shelves.pl generate OPAC itype images path
This patch makes icons point to the OPAC path instead of intranet's.
To test:
- On current master/3.22.x
- Have some itemtypes with icons set
- Have some biblios matching the itemtypes
- Add them to a public list
- Do a search in the OPAC for any of those biblios
=> SUCCESS: icons show correctly
- Choose the list
=> FAIL: icons fail to show, URL points to /intranet-tmpl/....
- Apply the patch, reload
=> SUCCESS: icons show correctly
- Sign off :-D
Sponsored-by: American Numismatic Society
NOTE: I had to set item-level_itypes to 'biblio record'
in order to trigger this. My icon's showed, but the
path was wrong. This patch corrects it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
630301673605733429c4ae79e125053cf4169376)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Wed, 23 Mar 2016 13:07:09 +0000 (14:07 +0100)]
Bug 16134: t::lib::Mocks::mock_preference should be case-insensitive
Test plan:
1. prove t/db_dependent/Auth_with_cas.t => FAIL
2. Apply patch
3. prove t/db_dependent/Auth_with_cas.t => SUCCESS
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
300bf096bda90a0f17c6615798957fa7f588b36e)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Nick Clemens [Tue, 23 Feb 2016 20:41:57 +0000 (20:41 +0000)]
Bug 15888 - Syndetics Reviews preference should not enable LibraryThing reviews
To test:
1 - Enable Syndetics Reviews without a LibraryThing ID
2 - Check page source and note you have a stanza for LTFL tabbed reveiws
3 - Apply patch
4 - Reload page and note LTFL tabbed reviews are not present
5 - Enter a LibraryThing ID and not the tab is restored.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
541a03cf6daace451f78e614b8019382dcd52acc)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Thu, 7 Apr 2016 05:43:21 +0000 (07:43 +0200)]
Bug 15868: Ask for confirmation when deleting a MMT action
Test plan:
Create marc modification template
Add an action
Delete it
With this patch you must get a confirmation mesg
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Aleisha [Sun, 20 Mar 2016 23:24:18 +0000 (23:24 +0000)]
Bug 15866: Add confirm message for deleting rotating collection from toolbar
To test:
1) Go to Tools -> Rotating Collections
2) Click on any rotating collection ('Add or remove items' from drop down menu)
3) Click 'Delete' from toolbar. Validate you are now asked to confirm your deletion. Check that cancel works, then check that confirm works.
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I've added the word 'rotating' before collection, to make
it clear for translators what is meant here.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
a48d166bbf506287355c9fceea2633159308c530)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Alex Arnaud [Wed, 17 Feb 2016 11:27:14 +0000 (12:27 +0100)]
Bug 15838 - Subscription duplicating: Reset fields from SubscriptionDuplicateDroppedInput syspef by getting them using name instead of id
How I tested:
Verified bug with start and end date (were not cleared without patch).
After applying the patch all fields defined in SubscriptionDuplicateDroppedInput
were cleared as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
873a49f13b79bf1f5f7163f217cfc3a317ce602f)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Wed, 6 Apr 2016 14:12:16 +0000 (16:12 +0200)]
Bug 16214: Fix typo 'To.jon' -> 'To.json'
Bug 15722 introduces a regression in serials patron search results,
causing the surname to not be displayed
To reproduce:
1. Create a routing list for a subscription
2. Click on "Add recipients" button
3. Run a search
4. Check that surname is not displayed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
e916ded09756ba4902a25e9e68fe536614419c87)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 8 Mar 2016 14:09:09 +0000 (14:09 +0000)]
Bug 15722: Escape patron infos for JSON in patron searches
If patron infos contain invalid JSON chars (\t for instance), the
results won't appear.
The solution is to escape these info.
Test plan:
Edit patron infos in DB (update borrowers set surname="foobar\t" where
borrowernumber=42)
Search for foobar (you should have more than 1 result)
Without this patch, DT retrieves a bad formatted JSON and the results
won't appear.
With this patch, the table result appears
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
cd20b61a7c845110e518e6dedc12ac50efebe4aa)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mark Tompsett [Fri, 1 Apr 2016 13:31:41 +0000 (09:31 -0400)]
Bug 16185: t/db_dependent/Reports_Guided.t is failing
TEST PLAN
---------
1) prove t/db_dependent/Reports_Guided.t
-- fails
-- note the failure has a scalar function-like bracketing
2) apply patch
3) prove t/db_dependent/Reports_Guided.t
-- passes
4) git diff origin/master
-- note all scalars have been changed to not have
function-like brackets which could be incorrectly
parsed.
5) run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
42d065937627a705b813eba577f519416f356d99)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 9 Feb 2016 17:02:05 +0000 (17:02 +0000)]
Bug 15773: Fix and standardise checkboxes code in framework
When creating a new subfield for an authority framework, the checkboxes
don't behave as they should.
If you click on the 'repeatable', 'mandatory' or 'is url' checkbox's
label, the checkbox from the second tab will be checked/unchecked.
This is caused by a non-unique id of the input element.
I have found this bug when working on the removal of CGI::checkbox in
both admin/auth_subfields_structure.pl and
admin/marc_subfields_structure.pl scripts.
This patch remove the use of CGI::checkbox as well as the generation of
html code from these 2 pl scripts (which should be avoided).
The code these scripts are now pretty similar.
Test plan:
Add/modify/remove subfield for a MARC framework and an Authority
framework.
Use as many field as possible and confirm that the values are correctly
inserted/displayed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
39597b86ae299a9b4c0c1e8221f51f9e8dd300ed)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
David Cook [Fri, 5 Feb 2016 05:09:45 +0000 (16:09 +1100)]
Bug 15745: C4::Matcher gets CCL parsing error if term contains ? (question mark)
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Also fixes ! and +
Rebased to master
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
It makes perfect sense and works as expected. This part of the code is too
under-tested so no point requiring a regression test for such a simple change.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
fcbd81049f590e5fc0c31030bcdb1311951c1444)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 8 Mar 2016 11:58:24 +0000 (11:58 +0000)]
Bug 15741: Fix rounding in total fines calculations
C4::Members::GetMemberAccountRecords wrongly casts float to integer
It's common to use sprintf in Perl to do this job.
% perl -e 'print int(1000*64.60)."\n"';
64599
% perl -e 'print sprintf("%.0f", 1000*64.60)."\n"';
64600
Test plan:
1) Create manual invoice for 64.60 (or 1.14, 1.36, ...)
2) Try to pay it using "Pay amount" or "Pay selected" buttons
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
92fbb1f3d0f2bdb070a1b647c96edbce5b28a377)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Wed, 23 Mar 2016 23:28:56 +0000 (20:28 -0300)]
Bug 15741: (regression tests) Rounding is not calculated correctly
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
f1e1eaa32870a5954a1151973bae3dbe3f3b8122)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 30 Mar 2016 10:30:01 +0000 (11:30 +0100)]
Bug 15323: Use fixtures for the active currency
prove t/Prices.t
fails after bug 15084 has been pushed
It's caused by
commit
1538e9ecf47642c4974693ff499c3e95e4d71977
Bug 15084: Replace C4::Budgets::GetCurrencies with
Koha::Acquisition::Currencies->search
Koha::Number::Price->_format_params calls
Koha::Acquisition::Currencies->get_active, which requests the DB.
The currency data should be mocked.
Test plan:
sudo service mysql stop
prove t/Prices.t
should return green
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Patch works as expected and passes the qa-tools tests.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
0a14e22d59343475ed6970b82b474a80e43d8e29)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 1 Mar 2016 12:13:22 +0000 (12:13 +0000)]
Bug 14441: TrackClicks cuts off/breaks URLs (XSLT)
Same test plan as previous patch, but for opac defail and result using
the XSLT views.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I am amazed!
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
ee0abde76e78713233a9fcd31fbb6f80b5a9610c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mason James [Tue, 1 Mar 2016 03:26:06 +0000 (16:26 +1300)]
Bug 14441 - TrackClicks cuts off/breaks URLs
to test...
1/ set TrackClicks syspref to 'track'
2/ add a problematic multipart url to an item's 'url' field
example url: http://foo.corg?key1=val1&key2=val2
3/ test url in opac-detail.pl - url is corrupt
4/ apply patch - url is corrct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only fixes the item URLs - a follow-up for the URLs
in the bibliographic record (856 for MARC21) is still
needed.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
de2a298a0623408c064ed0edbe47795740c814f4)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 30 Mar 2016 09:55:02 +0000 (10:55 +0100)]
Bug 14158: www search tests - Cleanup at the end
When something wrong happen, the parent process is waiting for the
children to finish, but they have been zombified and the test hangs.
To fix that, we should ensure that the cleanup is correctly done and
that the processes are correctly killed.
Test plan:
export KOHA_USER=koha
export KOHA_PASS=koha
export KOHA_INTRANET_URL=http://do_not_exist_but_its_expected
export KOHA_OPAC_URL=http://another_url
prove t/db_dependent/www/search_utf8.t
Without this patch, the tests will hang
With the patch applied, they won't!
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
8255a18edc9c2eee52b01bfa20114b088b9bf555)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marc Véron [Wed, 10 Feb 2016 16:21:40 +0000 (17:21 +0100)]
Bug 11498 - Prevent bypassing sco timeout with print dialog
This patch prevents bypassing the self check timeout with the print dialog.
To test:
- Set syspref 'WebVasedSelfCheck' to 'Enable'
- Set syspref 'SelfCheckoutReceivePrompt' to 'Show'
- Set syspref 'SelfCheckTimeout' to 20 seconds
- Apply patch
- Go to SCO page (/cgi-bin/koha/sco/sco-main.pl)
- Enter card number
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Confirm printing without waiting 20 seconds
=> Result: Print slip, SCO page shows 'Please enter your card number'
- Enter card number again
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Wait > 20 seconds (value of SelfCheckTimeout) and then confirm.
=> Result: Message appears "Timeout while waiting for print confirmation"
- Click on OK.
=> Result: Self checkout page refreshes (shows 'Please enter your card number')
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=11497
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
7f8037f642913d94ebec70413c6fd8cadfdf938d)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Wed, 23 Mar 2016 18:53:01 +0000 (15:53 -0300)]
Bug 16138: Restart plack when rotating logfiles
On log rotation Starman/Plack keeps failing (Auth.pm related problems)
due to permission issues:
Could not compile /usr/share/koha/opac/cgi-bin/opac/opac-search.pl: Can't locate Authen/CAS/Client/Response/Failure.pm
: ./Authen/CAS/Client/Response/Failure.pm: Permission denied at /usr/share/perl/5.20/base.pm line 97.
...propagated at /usr/share/perl/5.20/base.pm line 106.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client/Response.pm line 68.
Compilation failed in require at /usr/share/perl5/Authen/CAS/Client.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client.pm line 8.
Compilation failed in require at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
Compilation failed in require at /usr/share/koha/lib/C4/Auth.pm line 63.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth.pm line 90.
Compilation failed in require at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
BEGIN failed--compilation aborted at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
As we do with zebra daemons, starman should be restarted as it doesn't
handle log file rotation gracefully[1].
I'm not sure how to reproduce it on a dev environment.
[1] https://github.com/miyagawa/Starman/issues/55
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
93efeab13e25aea7e467b112983536833c69ceea)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 15 Mar 2016 09:38:20 +0000 (09:38 +0000)]
Bug 16068: Do not cache overridden prefs
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
6e8d24231c03775422f403a76ca41ccf22f40558)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Mon, 4 Apr 2016 10:31:21 +0000 (11:31 +0100)]
Bug 15967: Use the email template if the print template does not exist
From commit
581759e985c170db0edb4a895cda641930e5ac11
Bug 14133: Print notices should be generated with the print
template
"""
IMPORTANT NOTE: This test plan does not take into account the notices
generated for the staff ("These messages were not sent directly to the
patrons."). However the behavior will also change, the print template
will be used in all cases. Is it what we want?
"""
Yes, it is what we want. But if the print template does not exist, the
notice is not generated, we'd like to get the email template instead.
Test plan:
- Remove the print template for the letter you use for overdues
- Define an overdue rule to send an email
- Remove the email address for the patron which has overdues
- Execute the overdue_notices script
The staff should get an email notice and a print notice (using the
email template) should be generated for the patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
ea4a2436e274d8f0a5082ef6b6944c400ad69d88)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 08:58:06 +0000 (08:58 +0000)]
Bug 15967: Fix regression from bug 14133 - notify the library if patron is not
Regression introduced by bug 14133, see but 14133 comment 13.
Test plan:
Without this patch applied, if a patron cannot be notified (no email
address or sms number), the print notice generated for the library was
not.
With this patch applied, the print notice should be generated using the
print template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
faaa2cbcdb1970866be4f8a7001bf2de305823a9)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
John Seymour [Thu, 11 Feb 2016 03:38:15 +0000 (22:38 -0500)]
Bug 14633: Patch to control.ini to add or dependency to libapache2-mpm-itk
The other attachment was not a patch which could be applied by
'git bz'. This corrects that.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
debian/update-control will need to be run after this is applied, but
it works well
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
aa66debec6fcdbdadd643386749a61229167aa62)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 16 Mar 2016 10:01:18 +0000 (10:01 +0000)]
Bug 16082: Display a friendly "patron does not exist" message if that's the case - circulation.pl
The major part of pages you can access from a patron detail page (menu)
does not take into consideration the 'patron does not exist' case.
If the borrowernumber is linked to a deleted patron, a friendly message
should be displayed instead of an empty patron detail page.
Test plan:
Go on circ/circulation.pl?borrowernumber=424242
and circ/circulation.pl?borrowernumber=424242&batch=1
Notice the difference before and after this patch
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
7aedcf643e6f7793b4ebf55b1c7cdec7ec04a25d)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Mon, 21 Mar 2016 15:49:25 +0000 (15:49 +0000)]
Bug 16040: Update fnReloadAjax DT plugin to fix quotes deletion
When deleting quotes, the table is not regenerated and a JS error is
raised.
That is because we are not using an up-to-date plugin
Test plan:
Delete a quote and confirm you do not get a JS error
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
908a751e2cadcda0ceafa2efdd2cf0104a323467)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marcel de Rooy [Mon, 1 Feb 2016 12:48:06 +0000 (13:48 +0100)]
Bug 15713: Restart zebra when rotating logfiles
Somehow, it may happen that Zebra keeps writing to the old rotated logfile
with extension .log.1. I must add that although I saw that happen (a new
log was created and was empty, while Zebra kept writing to log.1 for weeks),
I cannot reproduce it every time.
By stopping the zebra server in prerotate and starting it again in
postrotate, this should not happen at all. In practice, this implies that
your Zebra server is restarted once a week.
Note: The existing sharedscripts directive makes sure that these actions
are not executed for all individual logfiles but once for all matching
logfiles (even when running multiple instances).
Test plan:
[1] Apply the change in koha-common.logrotate to the file
/etc/logrotate.d/koha-common.
[2] Run logrotate -f /etc/logrotate.conf (forcing a logrotate).
[3] Check in zebra-error.log that your zebra server was stopped
('killed by signal 15').
[4] Verify that your Zebra server runs (read: has been restarted).
(Do a search..)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
af47f00636848e1115b08652abcaec6b789bf672)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marc Véron [Thu, 24 Mar 2016 10:59:27 +0000 (11:59 +0100)]
Bug 14614: Multiple URLs (856) in cart/list email are broken
To reproduce:
- Add multiple subfields 856 u to a bilbio
- Add this biblio to a cart and send it as mail
(from Staff client and from OPAC)
Result: Links in mail body are broken
To test
- Apply patch
- Send carts again (from Staff client and from OPAC)
- Result: In mail body, links display separated with blank-pipe-blank
like http://bla.com | http://blabla.com | http://blablabla.com
- Change one of the 856 u to not to be a link, e.g. äöü
- Send carts again
- Verify that in mail body äöü correctly display as text.
(Amended to make it work for OPAC as well, MV)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
d135499d2893fe1000c627f433395989d7d9e022)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Tue, 29 Mar 2016 07:14:33 +0000 (08:14 +0100)]
Bug 16151: Restore the ability to place holds from lists at the OPAC
This patch fixes a bug introduced by bug 14544.
Holds can not be placed from lists at the OPAC, the action results in a
crash:
Can't call method "field" on an undefined value at
/home/koha/src/C4/Items.pm line 1504.
at /home/koha/src/opac/opac-reserve.pl line 601
Before 14544, the checkboxes were named 'ACT-$BIBNUM', something like
REM-4242. Now we can retrieve the biblionumber from the value.
Test plan:
Select a public list
check some titles and click on the 'Place hold' link
you should able to process the reservation
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
1ae64b97b39f5554e2d2360de9582a3e445854c5)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Alex Arnaud [Wed, 24 Feb 2016 09:13:40 +0000 (10:13 +0100)]
Bug 15889: LDAP authentication: Only update mapped attributes
Test plan:
- Update your configuration file to use LDAP authentication and enable update
(<update>1</update>) option,
- login with an existing user with extended attrbitutes that are not in
LDAP mapping,
- check that all attributes are still here.
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
(cherry picked from commit
c74678a1d239aaf91906039ccb3db940df4a0b41)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Marcel de Rooy [Fri, 25 Mar 2016 08:15:14 +0000 (09:15 +0100)]
Bug 16084: [QA Follow-up] Correct three occurrences of __KOHA_CONF_DIR__
This bug correctly inserts substitutions for this variable.
Four occurrences will now be changed. The line for log4perl.conf is now
correct, but the three other changes point to a location that does not
exist: /etc/koha/sites/$instance/zebradb.
That should just be: /etc/koha/zebradb.
All three cases concern the explain files.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
aa369c80c15b1699ddb89794c04bf0c3c0451b91)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Wed, 16 Mar 2016 19:21:32 +0000 (16:21 -0300)]
Bug 16084: log4perl.conf not properly set on packages
- Run koha-create to create an instance or just fire kohadevbox:ansible
=> FAIL: Notice the instance's koha-conf.xml points to __KOHA_CONF_DIR__
instead of /etc/koha/sites/kohadev/ on the log4perl entry.
=> FAIL: the /etc/koha/sites/kohadev/log4perl.conf contains __LOG_DIR__
instead of /var/log/koha/kohadev/
- Apply this patch and pick the koha-conf-site.xml.in and koha-create files
- Create a new instance
=> SUCCESS: All placeholders are filled correctly.
- Sign off
Regards
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
360cdea29559d84d1f82f0e1e102f18fc8475bb4)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Thu, 24 Mar 2016 16:55:04 +0000 (12:55 -0400)]
Bug 16146 - ACQ: Previewed records in Z39.50 search results are wrong
For 3.22.x only:
This patch fixes a bug which was fixed in cataloging by Bug 6367 and
fixed in master by Bug 15318. A misplaced line of JavaScript means that
the popup menu of options shown when clicking in a table cell links to
the wrong record.
To test:
1. Apply the patch and navigate to Acquisitions.
2. Locate an exsiting basket or create a new one.
3. Add to the basket using the option to order from an external source..
4. Perform a search which will return multiple results.
5. Test the "MARC" and "Card" links for multiple results and confirm
that the correct data is shown each time.
6. Click anywhere in the results table to show the hidden menu and test
the "Preview MARC," "Preview card," and "Order" links it displays,
confirming that the actions complete using the correct record.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Wed, 23 Mar 2016 16:13:32 +0000 (17:13 +0100)]
Increment version for 3.22.5 release
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Bernardo Gonzalez Kriegel [Tue, 22 Mar 2016 18:06:35 +0000 (15:06 -0300)]
Translation updates for Koha 3.22.05
New languages: Interlingua, Inuktitut and Inuinnaqtun
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Wed, 23 Mar 2016 16:01:59 +0000 (17:01 +0100)]
Update release notes for 3.22.5 release
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian Maurice [Wed, 23 Mar 2016 13:16:18 +0000 (14:16 +0100)]
Change syspref case to make tests pass
Regression due to bug 11998
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Colin Campbell [Fri, 18 Mar 2016 13:49:56 +0000 (13:49 +0000)]
Bug 16106 Correct loose to lose in comment
Comment was using incorrect (but similarly spelled) word, obscuring
the meaning slightly. Also corrected the release note altering the
grammar there additionally as it should have been 3rd person singular
so that it now reads more clearly
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
515e2d7c9d2b5afe3f7c0618596f1d9e5e699315)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 6 Jan 2016 13:10:00 +0000 (13:10 +0000)]
Bug 15119: Hide search header text boxes on render
When the page rendering is slow or the page is heavy, the tabs in the
header shown be not correctly displayed as tabs.
This patch suggests to hide them, display the first one, and wait for
the JS code to display them nicely.
To easily reproduced the ergonomic issue, go on the circulation home
page (/cgi-bin/koha/circ/circulation.pl) and search for a patron 'a' or
'd', you will get a lot of result and the page will be slow to be fully
displayed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
70eedf2217e1bfde1c56bc77c8dd0dc039124f47)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Zeno Tajoli [Tue, 1 Mar 2016 10:44:42 +0000 (11:44 +0100)]
Bug 15946 Valid namespace for OAI marcxml schema (3.22/3.20)
As the patch for master, this patch apply on 3.22 (and 3.20 probably).
This path fixes the value of xml schema variable and the link to Library
of Congress. For Dublin Core format those values are defined in
UNIMARCslim2OAIDC.xsl and MARC21slim2OAIDC.xsl. For MARCXML those
values are written into the code
To test it:
1) Setup OAI-PMH
2) Test the site inserting the BaseURL into http://validator.oaipmh.com
3) See the problem with ListMetadataFormats [link:
http://validator.oaipmh.com/#ListMetadataFormats] 4) Insert the patch
5) See the problem is over
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Invalid before patch, valid after.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Jonathan Druart [Wed, 9 Mar 2016 11:28:04 +0000 (11:28 +0000)]
Bug 16013: Make classification sources deletable
Because of a wrong variable scope, the classification sources are not
deletable.
Test plan:
Create a classification sources (admin/classsources.pl)
Try to delete it
Without this patch, the classification source won't be deleted
With this patch, it will work!
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
f6463317db08b9a4218ad94a2d191a5f5216c8c5)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Kyle M Hall [Mon, 7 Mar 2016 14:04:44 +0000 (14:04 +0000)]
Bug 15997 - Hold Ratios for ordered items doesn't count orders where AcqCreateItem is set to 'receiving'
Currently, the hold ratios script only counts on order items where the
record item is created at the time the order is placed, and not if the
item is created when the item is received.
Test Plan:
1) Set AcqCreateItem to recieving
2) Run the hold ratios report with "include ordered" checked
3) From aquisitions, order some additional items for the record
4) Re-run the hold ratios report, not there is no change in the ratio
for that record
5) Apply this patch
6) Re-run the hold ratios reporat again, the ratio should now have
changed
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
7e1ccbd6069658540dd352f63ade3ef7b19de282)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 18 Mar 2016 08:34:22 +0000 (08:34 +0000)]
Bug 16095: Remove target="_blank" when a link refer to an external link
If you click on a link that opens a new tab/window to another site, that tab
has access to the original window through JavaScript. The browsing context is
related, even if the domains are totally different.
The tab retains access to the original window's object via window.opener, even
if you navigate to another page or domain, in the new or original window.
Access to the Window object means the new window can use Window.location to
open a different URL in the original window, perfect for phishing attacks.
Depending on the site's Same-Origin Policy settings, the new window may have
access to other parts of the original window's DOM as well.
Any 'A HREF' that contains a target of of '_blank' or '_new' or a fixed name
is vulnerable. Previous security best practice often suggested creating a random
fixed name for an unpredictable namespace - that won't help with this problem!
Targets of '_self' and '_parent' are safe.
We do not use _new (at first glance) but several _blank. Some are used
to refer internal url, we do not need to update or remove them. Others
are used to satisfy OPACURLOpenInNewWindow, in these case, we should add
the rel="noreferrer" attribute to the a tags.
In other cases, we can simply remove them and let the users discover
that a mouse has more than one button (we are in 2016, they can do it!)
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
6c1b39b4cbceb1a414a91865e15612385c2eb5b7)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 17 Feb 2016 16:21:50 +0000 (16:21 +0000)]
Bug 15840: Catch errors if userid already exists when importing patrons
Import borrowers tool explodes if userid already exists. This error
should be caught to avoid the script to explodes.
TEST PLAN
---------
1) back up DB
2) drop DB, create empty DB
3) Apply patch 15842
4) web install all the sample data
5) login as system user and import patron data
-- sample provided to trigger error.
-- you will get a DBIx::class exception
"Duplicate entry ' for key 'userid'"
6) Apply this patch
7) Repeat steps 2-5
-- patrons won't be inserted but an error
will be nicely displayed in the error list.
8) run koha qa test tools
Note that it would be easy to insert the patrons anyway and generate a
userid based on the surname and firstname.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
f1e156453a1bc636914bc5c969e1665d7108cb95)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 10 Mar 2016 09:12:52 +0000 (09:12 +0000)]
Bug 11998: Clear L1 cache from psgi files
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
55b78f1a5dbbff5a790971e2f5a99ebdd6a3f18a)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 10 Mar 2016 08:55:27 +0000 (08:55 +0000)]
Bug 11998: Add a L1 cache for sysprefs
Accessing to the cache for each call to C4::Context->preference might
have an impact on performances.
To avoid that this patch introduces a L1 cache (simple hashref). It will
be populated by accessing the L2 cache (Koha::Cache).
If a pref is retrieved 10x, the first one will get the value from the L2
cache, then the L1 cache will be check.
To do so we will need to clear the L1 cache every time a page is loaded.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
47fbbb7cf5e7ef2f9ef422e2fd9232066100a64b)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 16:52:51 +0000 (16:52 +0000)]
Bug 11998: follow-up for the debian package psgi file
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
2eaf2cd71b9620c0d5782c7c78f86a5e323c89a4)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 16:45:07 +0000 (16:45 +0000)]
Bug 11998: Revert "Bug 13805: (Plack) Disable syspref cache"
This reverts commit
ca00f0ddaeb76106b4aa274fd1848844ae042f58.
Bug 13805 fixes an installer bug by disabling the syspref cache.
It was not a good idea, it introduced performance issues (see bug 13805
comment 14).
Test plan:
Test plan:
0/ Create a new database and fill the database entry in the koha conf
with its name
1/ Go on the mainpage, you should be redirected to the installer
2/ Try to log in
You should not get the login form again.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Test plan not followed by me for this patch, due to lack of working
plack setup, but I don't expect it to cause any problems, and performace
gain for plack will be tremendous
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
d4039ce09347c342f8ac048814ee10b47819df48)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 17:17:40 +0000 (17:17 +0000)]
Bug 11998: Do not clear syspref cache in psgi file
This in only in koha.psgi, it has been introduced by bug 13815 but
should not have been added by this patch.
Removing it should not introduce any changes.
Not that it won't impact debian packages.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
f25e3ed90b55b657c71e117a1e9a8bc2c3a1809f)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Mon, 7 Mar 2016 09:24:14 +0000 (09:24 +0000)]
Bug 11998: Make HoldsQueue.t tests pass [TO REVERT]
This patch should not be the way to make these tests pass.
The prefs should not be updated using set_preference, it will modify the
values in the cache.
I have no idea how to make them pass using the correct way, please help
:)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
3907401a6d293872ca1fb46c90da029b91d37e31)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 4 Mar 2016 13:21:39 +0000 (13:21 +0000)]
Bug 11998: Use C4::Context->preference in Koha/Schema/Result/Item.pm
Otherwise some tests won't pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
a691e88a4ebf57e9ebda8afb5f8e6bac33bc6ad6)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 4 Mar 2016 13:14:59 +0000 (13:14 +0000)]
Bug 11998: Use t::lib::Mocks::mock_preference in tests
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
56a782c666d1d05215e49101e33fce0a3cd30377)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 16:54:30 +0000 (16:54 +0000)]
Bug 11998: Use Koha::Cache to cache sysprefs
At the moment, the sysprefs are only cache in the thread memory
executing the processus
When using Plack, that means we need to clear the syspref cache on each
page.
To avoid that, we can use Koha::Cache to cache the sysprefs correctly.
A big part of the authorship of this patch goes to Robin Sheat.
Test plan:
1/ Add/Update/Delete local use prefs
2/ Update pref values and confirm that the changes are correctly taken
into account
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Tested with plack with syspref cache enabled, there is some time between setting the syspref and applying it, but it takes just one reload of page, it shouldn't be problem, should it?
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Tested with CGI and CGI + memcache; some small issues still remain,
but it would be better to deal with them in separate bug reports
if necessary
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
9820f9dfbd63ecc812b6b2a4ec71af91f303f933)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Mon, 22 Feb 2016 10:08:55 +0000 (10:08 +0000)]
Bug 15163: Do not erase patron attributes if limited to another library
The patron attributes displayed on editing a patron are not displayed if
limited to another library.
C4::Members::Attributes::SetBorrowerAttributes will now only delete attributes
the librarian is editing.
SetBorrowerAttributes takes a new $no_branch_limit parameter. If set,
the branch limitations have not effect and all attributes are deleted
(same behavior as before this patch).
Test plan:
1/ Create 2 patron attributes, without branch limitations.
2/ Edit a patron and set a value for these attributes
3/ Limit a patron attributes to a library (one you are not logged in
with).
4/ Edit again the patron.
=> You should not see the limited attributes
5/ Edit the patron attributes and remove the branch limitation
=> Without this patch, it has been removed from the database and is not
displayed anymore.
=> With this patch, you should see it.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
4a3404594ff326e0babb8b7bee8e65f5646ff9f9)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Fri, 11 Mar 2016 12:47:26 +0000 (12:47 +0000)]
Bug 16054: Fix variable scope error in paycollect.pl
$borrower, $borrowernumber and $template and not visible in the
subroutine.
Using $b_ref and passing $template fixes the issue.
Test plan:
Under plack, use the pay selected button.
On the paycollect page, you should see the image of the patron
It certainly fixes some other bugs.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
da21ad065939d0789bb90d8fd6d088b781688aa3)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jesse Weaver [Fri, 12 Feb 2016 19:43:32 +0000 (12:43 -0700)]
Bug 15446: Update DB rev (3.22.04.003)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 30 Dec 2015 17:19:02 +0000 (17:19 +0000)]
Bug 15446: Update systempreferences rows where type=YesNo and value=''
Signed-off-by: Marc Véron <veron@veron.ch>
Amended to fix typo in sql statement.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
(cherry picked from commit
1427cacfe74e4cdc3a4aa4d400e3b02305dfc6ec)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 30 Dec 2015 17:15:31 +0000 (17:15 +0000)]
Bug 15446: Rename Koha::Object[s]->type with _type
In a few case (at least systempreferences and export_format (csv profiles),
the type method of Koha::Object and Koha::Objects can be in conflict with the
column names.
Indeed systempreferences.type exists and so the method will return
'Systempreference' (the name of the module) instead of the value of the row in
DB.
I have found at least 1 place where it can cause issue:
In C4::Context->set_preference:
601 my $syspref = Koha::Config::SysPrefs->find( $var );
602 my $type = $syspref ? $syspref->type() : undef;
603
604 $value = 0 if ( $type && $type eq 'YesNo' && $value eq '' );
type will always be 'Systempreference' and the YesNo pref will be set to an
empty string '' instead of 0.
I am not sure about the consequences of this, but it is preferable to
fix it ASAP.
To reproduce:
0/ Do not apply this patch
1/ Edit a YesNo prefs, AutoEmailOpacUser for instance
2/ Set it to "Don't sent"
3/ Check the value in DB, it should be set to an empty string, instead
of 0
4/ Apply this patch and try again. Now the value should be 0
Followed test plan, value is now 0 as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
(cherry picked from commit
de3289506dcda91510dc9c7a867558a29ebefd57)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Conflicts:
Koha/Branch.pm
Koha/Branches.pm
Jonathan Druart [Wed, 30 Dec 2015 17:11:45 +0000 (17:11 +0000)]
Bug 15446: Add tests
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
(cherry picked from commit
bd7e79940d548c417580bb79a2f250751fc4575c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Wed, 9 Mar 2016 15:43:52 +0000 (10:43 -0500)]
Bug 16026 - Use Font Awesome icons on cataloging home page
The cataloging home page has one instance of a Glyphicon. This patch
replaces it with a Font Awesome icon.
To test you must have the EnableAdvancedCatalogingEditor preference
enabled.
- Apply the patch and go to the Cataloging home page.
- Confirm that the "Advanced editor" button uses the "pencil" icon and
that it still works correctly.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
a6917deede700c7a64de58fb5107ce9f1d18a044)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Wed, 9 Mar 2016 15:14:58 +0000 (10:14 -0500)]
Bug 16024 - Use Font Awesome icons on item types administration page
When editing an item type, a Glyphicon is used for the "translate" link.
It should use a Font Awesome icon instead. This patch corrects it.
To test, apply the patch and go to Administration -> Item types.
- Edit an existing item type.
- Confirm that the icon associated with the "Translate into other
languages" link is correct.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
d638520f85e6806cbde83fa47cc7aa3e6fefa3ff)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Frédéric Demians [Wed, 30 Dec 2015 15:29:03 +0000 (16:29 +0100)]
Bug 15445 DateUtils.t fails on Jenkins due to server sluggishness
Jenkins server is abnormally slow to perform a task done in less than
1s elsewhere. The test stay valid by giving just a bit more time to Jenkins
server.
TO TEST:
- Confirm that the two test hasn't changed. They the just get 4s to
perform
- Push the patch to master and observe that DateUtils.t doesn't fail
anymore.
NOTE: Also passed koha qa test tools too.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended: Changed to 2s, should be enough
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
357ddab7c6519fdbb57e448c28170c267035a130)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Zeno Tajoli [Wed, 2 Mar 2016 12:01:22 +0000 (13:01 +0100)]
Bug 15955: Tuning function 'New child record' for Unimarc 205$a -> 461$e
Now the sYstem tries to insert value of 205$a into 461$a when a child is
created from the father record. In UNIMARC 46x tags there is not
present a subfield for ediction value (205$a in UNIMARC).
To Test:
1) Check to have EasyAnalyticalRecords on 'off'
2) Check to use UNIMARC
3) Create a record with data in 200$a (title), 205$a (ediction), 700
(author) 215$a(Place), 215$d(date)
4) From those record create a child using 'New'->'New child record'
5) See the values in 461 tag: You can see that in 461$a there is the
value of 205$a from father This is wrong, you need to have the value
of 700 $a and $b from father record, and 205$a in 461$e.
6) Appy the patch
7) Redo 4-5
8) Now 461 is good
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I have not checked the doc but trusting author and signoffer.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
69cf2d9451ce3839bbbf16d91da0cc02a479e1f5)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Mon, 29 Feb 2016 19:39:30 +0000 (14:39 -0500)]
Bug 15941 - The template for cloning circulation and fine rules says "issuing rules"
The template for cloning circulation and fine rules should use the
phrase "circulation and fine rules" instead of "issuing rules."
Also changed: Added "Cancel" link to return the user to the circulation
and fine rules page.
To test, navigate directly to /cgi-bin/koha/admin/clone-rules.pl.
The page title, breadcrumbs, and heading should all use the phrase
"circulation and fine rules."
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
92544ea10d76c1a9f604c9c60ee33dc50e39d7fc)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Nicole C Engard [Thu, 28 Jan 2016 17:24:31 +0000 (17:24 +0000)]
Bug 15694: Add aliases for date/time last modified
This patch will add indexes for Date/time-last-modified.
To test:
1. apply patch
2. reindex
3. search for dtlm:DATE and date-time-last-modified:DATE
4. confirm that you get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I confirm Hector signing-off. A simple Zebra server restart suffice to get
working the searches on date-time-last-modified and dtlm.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
39f9b9ddb0359428e4379a90711eb9dc9961be59)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Wed, 9 Mar 2016 19:49:40 +0000 (14:49 -0500)]
Bug 16033 - Quotes upload preview broken for 973 days
A missing snippet of DataTable configuration means that when you upload
a CSV of quotes to the Quotes of the Day feature the table previewing
your import is not visible. This patch corrects it.
To test, apply the patch and go to Tools -> Quote editor -> Import
quotes.
- Upload a CSV file containing data in two columns, "source","text"
- When your upload completes you should see a DataTable previewing the
data from your CSV.
- Check that deletion of individual quotes works from the preview.
- Check that quotes are correctly imported.
- Ponder the long 2.66 years during which this page was broken.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Quote of the day: Serenity of mind comes with patience.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
54214c4016d3d20da44047df41034fd752c50591)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Wed, 9 Mar 2016 18:46:46 +0000 (15:46 -0300)]
Bug 16031: (followup) Fix documentation
This followup fixes a tiny mistake in the script POD.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
5439c71689ca49fe1fd02efae725a809f8bd67a8)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Tomas Cohen Arazi [Wed, 9 Mar 2016 18:41:02 +0000 (15:41 -0300)]
Bug 16031: sitemap.pl shouldn't append protocol to OPACBaseURL
Since bug 5010 was pushed, OPACBaseURL already contains the protocol. The
sitemap.pl script was written before this was pushed, and thus still concatenates
http:// in front of OPACBaseURL.
This patch removes this behaviour.
To test:
- Have OPACBaseURL set to (say) http://myopac.com
- Run the sitemap.pl script without specifying the --url param
=> FAIL: Notice URLs look like http://http://myopac.com/bib... in the sitemap files.
- Apply the patch
- Run the sitemap.pl script without specifying the --url param
=> SUCCESS: Notice URLs look correctly like http://myopac.com/bib...
- Sign off :-D
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
41657a87f6981516affff2f482084c7104aa34cb)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Wed, 9 Mar 2016 11:57:47 +0000 (11:57 +0000)]
Bug 16014: Display a warning on deleting OAI sets
A JavaScript alert should ask the user to confirm deletion of a OAI set.
Test plan:
Define a OAI set
Delete it
=> With this patch you should get a warning
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
5dc392f6638b7723a95007afadb23d2872c3f19f)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Fri, 4 Mar 2016 17:07:44 +0000 (12:07 -0500)]
Bug 15982 - Serials numbering patterns can be deleted without warning
A JavaScript alert should ask the user to confirm deletion of a serial
numbering pattern. This patch adds this to the template.
To test, apply the patch and go to Serials -> Manage numbering patterns.
- In the list of patterns, click any "Delete" link.
- Verify that a JavaScript alert is triggered.
- Test that cancelling the alert cancels the deletion operation.
- Test that confirming the alert allows the deletion to complete.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
6179f04c8afcbc965756cf7daea039be986727d7)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Owen Leonard [Fri, 4 Mar 2016 16:52:25 +0000 (11:52 -0500)]
Bug 15981 - Serials frequencies can be deleted without warning
A JavaScript alert should ask the user to confirm deletion of a serial
frequency. This patch adds this to the template.
To test, apply the patch and go to Serials -> Manage frequencies
- In the list of frequencies, click any "Delete" link.
- Verify that a JavaScript alert is triggered.
- Test that cancelling the alert cancels the deletion operation.
- Test that confirming the alert allows the deletion to complete.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
4e82b8db94ee24ebd49541c25a6dac55cb8d543c)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Jonathan Druart [Thu, 3 Mar 2016 11:35:14 +0000 (11:35 +0000)]
Bug 15968: Unnecessary loop in C4::Templates
From C4::Templates::output
# add variables set via param to $vars for processing
for my $k ( keys %{ $self->{VARS} } ) {
$vars->{$k} = $self->{VARS}->{$k};
}
This loop is not necessary, we could do the same with
$vars = { %$vars, %{ $self->{VARS} } };
After a quick benchmark, it gains 100 microseconds when we pass 170 vars
to the template.
Test plan:
Do some clicks on the interface, everything should be ok.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Perl idiosyncratic way of merging hash, clearer, if not quicker (not
verified)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
9be221b14eee137f4143e4a2243eadfb03fcfbbc)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Kyle M Hall [Wed, 3 Feb 2016 19:05:19 +0000 (19:05 +0000)]
Bug 15735: Audio Alerts editor broken by use of of single quotes in editor
Single quotes audio selector break ability to edit an alert
Test Plan:
1) Enable audio alerts
2) Add new a alert with a select containing single quotes such as: input[name*='test']
3) Note you cannot edit the alert
4) Apply this patch
5) Reload the page
6) You should now be able to edit the alert
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Bug 15734 applied on top. Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
f30091414755728317cf34421f7709a939745881)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Galen Charlton [Wed, 9 Mar 2016 01:41:33 +0000 (01:41 +0000)]
Bug 16009: fix GetMember() search on NULL/undef values
This patch fixes a bug whereby GetMember(searchfield => undef)
(i.e., searching for patron records where 'searchfield' is NULL)
would crash.
This fixes a regression introduced by bug 15344 that in turn
exposed a long-standing bug in GetMember().
To test:
[1] Import some offline circulation transactions that include at
least one return.
[2] Attempt to view the list of pending transactions; a crash
will occur.
[3] Apply the patch and view the list of pending transactions again;
this time, it should work.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Fri, 19 Feb 2016 20:49:02 +0000 (15:49 -0500)]
Bug 15871: Improve PerlCritic level for t/RecordProcessor.t
perlcritic -5 failed.
Attempt to clean up to a higher level:
-- use English to address use of $@ variable
-- perltidy on the code
-- substitute q{} for ''
-- expand out single line hacky goodness (... s/\.pm$//) to more code
-- remove parenthesis on functions that don't need it
-- add x, s, and m as needed to regexps
-- change double quotes to single quotes where no variable involved
-- tweaked eval destroy test to check return value and use $EVAL_ERROR
-- renamed $processor to $record_processor in the subtest to avoid
lexical warnings
TEST PLAN
---------
$ perlcritic -5 t/RecordProcessor.t
Don't modify $_ in list functions at line 43, column 25. See page 114 of PBP. (Severity: 5)
$ perlcritic -2 t/RecordProcessor.t
No package-scoped "$VERSION" variable found at line 1, column 1. See page 404 of PBP. (Severity: 2)
Quotes used with a string containing no non-whitespace characters at line 34, column 36. See page 53 of PBP. (Severity: 2)
Quotes used with a string containing no non-whitespace characters at line 34, column 39. See page 53 of PBP. (Severity: 2)
Quotes used with a string containing no non-whitespace characters at line 36, column 33. See page 53 of PBP. (Severity: 2)
Quotes used with a string containing no non-whitespace characters at line 36, column 36. See page 53 of PBP. (Severity: 2)
Don't modify $_ in list functions at line 43, column 25. See page 114 of PBP. (Severity: 5)
Regular expression without "/s" flag at line 43, column 33. See pages 240,241 of PBP. (Severity: 2)
Regular expression without "/x" flag at line 43, column 33. See page 236 of PBP. (Severity: 3)
Regular expression without "/m" flag at line 43, column 33. See page 237 of PBP. (Severity: 2)
Regular expression without "/s" flag at line 43, column 66. See pages 240,241 of PBP. (Severity: 2)
Regular expression without "/x" flag at line 43, column 66. See page 236 of PBP. (Severity: 3)
Regular expression without "/m" flag at line 43, column 66. See page 237 of PBP. (Severity: 2)
Expression form of "grep" at line 47, column 8. See page 169 of PBP. (Severity: 4)
Expression form of "grep" at line 50, column 20. See page 169 of PBP. (Severity: 4)
Regular expression without "/s" flag at line 50, column 26. See pages 240,241 of PBP. (Severity: 2)
Regular expression without "/m" flag at line 50, column 26. See page 237 of PBP. (Severity: 2)
Return value of eval not tested at line 73, column 1. You can't depend upon the value of $@/$EVAL_ERROR to tell whether an eval failed. (Severity: 3)
Magic punctuation variable $@ used at line 78, column 5. See page 79 of PBP. (Severity: 2)
Reused variable name in lexical scope: $processor at line 84, column 5. Invent unique variable names. (Severity: 3)
Subroutine "new" called using indirect syntax at line 87, column 18. See page 349 of PBP. (Severity: 4)
Subroutine "new" called using indirect syntax at line 93, column 18. See page 349 of PBP. (Severity: 4)
Quotes used with a string containing no non-whitespace characters at line 96, column 40. See page 53 of PBP. (Severity: 2)
Subroutine "new" called using indirect syntax at line 99, column 18. See page 349 of PBP. (Severity: 4)
Subroutine "new" called using indirect syntax at line 106, column 18. See page 349 of PBP. (Severity: 4)
$ prove -v t/RecordProcessor.t
t/RecordProcessor.t .. ok
All tests successful.
Files=1, Tests=13, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.22 cusr 0.02 csys = 0.25 CPU)
Result: PASS
$ prove -v t/RecordProcessor.t
...
$ git bz apply 15871
Repeat perlcritic level 2, and only $VERSION warning should exist.
Retest with the prove.
Run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
I don't really care about perlcritic as long as it involves changing '' into qw{} (WTF?)
Anyway, I'd do this kind of things as we go, for example, if we were adding more tests. In that
case it would just be a followup for this, after you provided a patch for an enh/bugfix.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
(cherry picked from commit
7721a7b8d2883c2e864eb672ebbef792450e91ff)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Nick Clemens [Tue, 2 Feb 2016 14:31:34 +0000 (14:31 +0000)]
Bug 15697 - [QA Followup] Apply change to NORMARC
This patch switches from UNLESS MARC21 to IF UNIMARC - this way changes
apply to MARC21 and NORMARC and UNIMARC remains unaffected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit
566daf8c24ad577da1b07c190979ada67877bed7)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Nick Clemens [Thu, 28 Jan 2016 20:33:58 +0000 (20:33 +0000)]
Bug 15697: Unnecessary comma between title and subtitle on opac-detail.pl
To test:
1 - Go to Administration->Keyword to MARC mapping
2 - Add a mapping (or ensure it exists)
Field name: subtitle
MARC field: 245
MARC subfield: b
3 - View a record with a subtitle in the opac
4 - Note in MARC 21 you have "Title of record:, subtitle of record"
5 - Apply patch
6 - View the record again and note the comma is no longer present.
Note: this patch removes the comma only for MARC21 where subtitle is not
repeatable. UNIMARC seems to be repeatable and does not include
punctuation so I believe this may be needed there.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Comma removed from title of the window and breadcrumb
section
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit
e19db8ca32dd776263b73474ece4e17d88ab17b4)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Hector Castro [Thu, 28 Jan 2016 16:40:34 +0000 (10:40 -0600)]
Bug 15693: Unnecessary punctuation mark when check-in an item in a library other than the home branch
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
a9a10c57807a91f550ffc73f6fb32e631d4bdb3f)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Mark Tompsett [Mon, 4 Jan 2016 06:16:59 +0000 (01:16 -0500)]
Bug 14097: Fixed missing test cases
Fixed AllowPkiAuth issue caused by 15101.
Added missing AudioAlerts
TEST PLAN
---------
1) prove -v t/db_dependent/UsageStats.t
-- should pass after applying patch
2) Run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
5f71faf97185efbfad69e4f2237c9e2d38e7a812)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian FIOL [Mon, 24 Aug 2015 11:51:16 +0000 (13:51 +0200)]
Bug 14097 : Changing AddReserve prototype call
In response of Joubu comment #19
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
9ac68128d99aff4b8d3cabb98c3e84d0f0658b3a)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Julian FIOL [Mon, 24 Aug 2015 11:50:16 +0000 (13:50 +0200)]
Bug 14097 : Avoid issue if the number of syspref shared is modified
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(cherry picked from commit
e3e507be9e9f90ff075fafba8013c8e54fa1fa00)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>