Bug 36440: Add edit buttons for patron flags in attention box
Add edit buttons for patron flags in attention box and show
flag status in detail view
To test:
1) Go to patron details for a patron with address in
doubt and card lost flags set and verify these are
highlighted under "Library use" and the patron messages
has edit buttons that links to the modfiy patron page.
Sponsored-by: Gothenburg University Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Thu, 4 Apr 2024 12:31:59 +0000 (12:31 +0000)]
Bug 26654: Added item number column to item search
Test plan:
1. Apply patch
2. Do an item search and notice the column containing the item number
Signed-off-by: Michelle Spinney <mspinney@clamsnet.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:22:42 +0000 (12:22 +0200)]
Bug 29948: Remove margin bottom for paragraph
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:18:55 +0000 (12:18 +0200)]
Bug 29948: Hide entry if empty
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Mon, 6 May 2024 06:48:28 +0000 (06:48 +0000)]
Bug 29948: (follow-up) Update system preference description and heading
This follow-up:
1. Updates the OPACAuthorIdentifiersAndInformation system preference
description.
2. Changes the OPAC heading used on the bibliographic record and
authority record detail pages from "Author identifiers/information"
to "Author information". Identfiers are a subset of author information
and having just "Author information" is sufficient. In addition,
the authority record doesn't have to include identifiers.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 11:46:21 +0000 (12:46 +0100)]
Bug 29948: Fix display of selected values
The values were correctly inserted but the display was not sorting
correctly
Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 14 Mar 2024 09:40:29 +0000 (10:40 +0100)]
Bug 29948: Allow to sort info
With this patch the different info can be ordered when editing the
syspref
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 14 Mar 2024 08:58:05 +0000 (09:58 +0100)]
Bug 29948: OPACAuthorIdentifiersAndInformation
This patch merge the previous patch attempt with the existing OPACAuthorIdentifiers syspref.
It creates a new syspref OPACAuthorIdentifiersAndInformation and remove
OPACAuthorIdentifiers.
"identifiers" become an entry of the new syspref.
Test plan:
Select some entries in OPACAuthorIdentifiersAndInformation
Edit an authority record and enter data in the corresponding subfield
(the list is on the syspref entry)
Go to the biblio detail page or the authority detail page at the OPAC
and notice that the info you selected are correctly displayed.
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 13 Mar 2024 15:07:47 +0000 (16:07 +0100)]
Bug 29948: Display authors information along with the identifiers
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 10 May 2024 13:13:20 +0000 (13:13 +0000)]
Bug 36827: Fix tab formatting
This patch removes unwanted whitespace between the tabs and the tab content
Test plan:
1) Enable the ERM module and navigate to the eUsage > Reports sections
2) Observe the whitespace between the tabs and the content
3) Apply patch and run yarn build
4) Hard refresh the page, the whitespace should be gone
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 10 May 2024 13:18:45 +0000 (13:18 +0000)]
Bug 36828: Remove commented out code
Test plan:
1) Look at the patch diff and observe that the commented out code has been removed
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Wed, 20 Mar 2024 15:04:14 +0000 (16:04 +0100)]
Bug 36370: Add ContentWarningField to UNIMARC XSLT
Bug 31123 added new feature with preference ContentWarningField.
Add this behavior to UNMARC XSLT files.
This patch adds new template 'tag_content_warning' in UNIMARCslimUtils.xsl
called in results and details pages.
New field is placed after 3xx.
Test plan (in both interfaces OPAC and staff):
1) Create a new field 599 in framework
2) Set system preference ContentWarningField to 599
3) Edit a record to add a 599 with text in $a$b and an URL in $u
4) Perform a search to find this record
=> Check you see content_warning: <a href="$u">$a</a> $b
5) Click on details page
=> Check you see content_warning: <a href="$u">$a</a> $b
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 6 Mar 2024 16:24:25 +0000 (16:24 +0000)]
Bug 36373: Show existing bookings in the datepicker
This patch exposes existing bookings as info dots in the flatpickr
Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
danyonsewell [Fri, 15 Mar 2024 01:21:53 +0000 (01:21 +0000)]
Bug 36325: Add option to koha-run-backups/koha-dump, to exclude logs
Written patch to add flag to both koha-dump and koha-run-backups.
Test plan:
1. do a sudo koha-dump and sudo koha-run-backups and check the contents of the .tar.gz backup in /var/spool/koha/instance/ and verify logs are in there
2. apply this patch
3. this time do sudo koha-dump --exclude-logs and sudo koha-run-backups --exclude-logs and check the contents of the .tar.gz backup in /var/spool/koha/instance and verify nothing from /var/log/koha is in there.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 16 Jan 2024 12:18:48 +0000 (12:18 +0000)]
Bug 35813: (follow-up) Correct dialog class and clean up whitespace
This patch changes the class of the success message from "success"
(which is a Bootstrap class) to "message" which is the class we use
elsewhere in Koha for this kind of informational message.
The patch adds the same dialog markup to labeledMARCdetail.tt.
The patch also trims trailing whitespace from place_booking_modal.js
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Mon, 15 Jan 2024 16:45:03 +0000 (16:45 +0000)]
Bug 35813: Add success feedback after placing/editing bookings
This patch restores the lost behaviour that a successful add/edit of a
booking via the 'Place booking' modal should notify the end user that
the submission was sucessful.
Test plan
1) Set an item as bookable to expose the 'Place booking' button
2) Place a new booking from the following pages and confirm that you
now recieve feedback.
* Catalog > Title > Details
* Catalog > Title > MARC details
* Catalog > Title > ISBD details
* Catalog > Title > Item details
* Catalog > Title > Bookings
3) Edit a booking on the 'Catalog > Title > Bookings' page and confirm
you now recieve feedback.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36794: Illegitimate modification of biblionumber subfield content (999 $c)
It happens that librarians, by mistake, open a biblio editor putting in the
URL, by hand, the biblionumber prefixed with a blank (e.g.
.../addbiblio.pl?biblionumber= 123 -- mind the space before 123).
In such a case the editor opens with the right biblio record (i.e. 123)
but, after saving the record, the content of the biblionumber MARC
field (999 $c for a standard MARC 21 installation) results modified and
contains additional initial blanks.
Moreover, while using ES and making a search for the record (with title,
author etc.) we get two records on the result list (instead of one).
This is because in the addbiblio.pl script $biblionumber is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction.
Test plan:
==========
0. Have a test installation with ES.
1. Open a biblio record in the editor with an added space before
biblionumber value, e.g.:
http://ktd:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber= 123
Save the record.
2. From the Normal view choose Save -> MARCXML. Open the saved file in
your favourite editor. You should see, at the end, something like:
<datafield tag="999" ind1=" " ind2=" ">
<subfield code="c"> 123</subfield>
(mind the space before 123).
This is not right.
3. Make a search with the title or author's name from the record (e.g.
Henning Mankell for the record 123 from the default ktd data set).
You should get two records instead of one (while using ES).
4. Apply the patch, restart_all. Repeat p. 1 and 2 with a different
biblionumber. Notice the unchanged (i.e. without spaces) value
of 999 $c subfield in the exported record and only one record
as a result of a search.
WNC amended patch - rebased, added conditional in case no bib, moved comments to their own lines
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36799: Illegitimate modification of MARC authid field content (001)
It happens that librarians to save time open an authority editor by putting
in the URL, by hand, the authid prefixed, by mistake, with a blank (e.g.
.../authorities.pl?authid= 100 -- mind the space before 100). In
such a case the editor opens with the right auth record (i.e. 100) but,
after saving the record, the content of the authid MARC field (001 for
a standard MARC 21 installation) results modified and contains
additional initial blanks.
Moreover, if the heading (1XX field) was modified in the authority record
during such an edit, the changes will not propagate to the linked
bibliographic records. And won't in the future.
This is because in the authorities.pl script $authid is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction (line 540 in the current main branch).
Test plan:
==========
1. Open an auth record in the editor with an added space before
authid value, e.g.:
http://ktd:8081/cgi-bin/koha/authorities/detail.pl?authid= 100
Modify the heading field -- in the ktd data set:
150 Computerized typesetting
Save the record.
2. a) Open the record for editing again--see the space added before
the authid in field 001. Close the editor (with Cancel).
b) Try to go to the linked biblio records with Used in X records.
Note no results, if using ES.
c) Remove the space before authid (after an:) in the URL.
Go to the linked biblio records. See that the content of
the field controlled by the modified auth record did not
update.
3. Apply the patch; restart_all.
4. Repeat p. 1 and 2 with a different authid. Everything should
be OK now.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 33849: Do not reset new patrons home library when error occurs
While adding new patron, if patron is flagged as duplicate
or another error occurs and their home library differs from
library user is logged in, patrons home library resets as
logged in users library. This happens with all patrons
expect those with category type C. This patch removes checking
if patrons category type is C from code so that all category
types use previously chosen home library even if error occurs.
To test:
1. Add new patron and set their library to a different
library than the one you're logged in.
2. Cause an error (wrong age, duplicate etc) while saving.
3. Attempt to save.
=> Note that patrons home library is set as one you're
logged in.
4. Apply this patch.
5. Repeat steps 1 to 3.
=> Note that patrons home library hasn't changed.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35149: Add Option to ignore submit of checkout field when empty
1) Apply patch
2) Set CircAutoPrintQuickSlip to "do nothing"
3) Go to the checkouts form for a specific patron
4) Submit the form with empty value
5) Verify that no action is taken and you stay on the current page
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 7 May 2024 16:03:54 +0000 (16:03 +0000)]
Bug 36797: Change WHILE loop into FOREACH
To test:
1. Find a record that has 1000 non-waiting holds with different priorities.
2. Try loading the reserve page for that record ( /reserve/request.pl?biblionumber=X )
3. Error: Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
4. APPLY PATCH
5. Try again, this time the page should load.
6. Try testing on a record with less than 1000 holds, making sure the priorities are still set right.
7. Make sure you can change your priorities and everything works right.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 10 May 2024 18:01:59 +0000 (14:01 -0400)]
Bug 36832: (bug 36791 follow-up) Allow authid=0
To test:
1. Go to the Authorities module and do a Z39.50 search that will return
results (e.g. a general subject heading)
2. Import an authority record from the results
--> Confirm that the record is imported into the editor
3. Authorities > New, replace it via Z39.50, confirm it's imported
4. Authorities > New, fill the required fields, confirm it saves
5. Edit an existing authority, replace it via Z39.50, confirm it saves
6. Edit an existing authority, replace authid=nn in the URL with a
number that doesn't exist like 1000000, confirm you get a 404 page
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Mon, 29 Jan 2024 09:08:00 +0000 (10:08 +0100)]
Bug 35927: Selecting MARC framework again doesn't work when adding to basket from an external source
Like Bug 19372, selecting MARC framework currently doesn't work when adding to basket from an external source.
Strangly I can reproduce on koha-testing-docker, but we have this issue with a Ubuntu Focal install.
Looks like it comes from a bad syntaxe than needs to be replaced in any case.
Test plan:
1) Add an order to a basket from an external source
2) Select another framework than the default one on the search result
view. Before doing 'add order' on choosen search result line.
3) Chek the framework code you will pick will be used in the created biblio record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Mon, 6 May 2024 16:04:39 +0000 (12:04 -0400)]
Bug 36735: (follow-up) Fix TT filters and add a comment
holds_table.inc depends on form-submit.js, but importing the asset
directly breaks the script. Add a comment stating that any script that
imports holds_table.inc must import form-submit.js too.
Also change uri filters to html
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Update the revert hold button to use the new include for submitting
forms from link data with a POST request
To test:
1. Place a hold on a biblio record
2. Check an item in to fill the hold
3. On the holds tab for the biblio record, click the "Revert waiting
status" button for that hold
--> The page reloads but the hold is still waiting
4. Apply patchset
5. Click to another page and then return to the holds tab (we don't want
to refresh the page and resend the request)
6. Click the "Revert waiting status" button for that hold
--> The hold should be reverted to pending status
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Liz Rea [Fri, 16 Jun 2023 17:50:35 +0000 (12:50 -0500)]
Bug 34041: z3950 responder additional options not coming through properly
This patch adds the <config> node that the z3950 responder starter script is looking for in the z3950/config.xml to the example code.
To test:
- verify that the <config> </config> is around the commented z3950_additional_options suggestion in the etc/z3950/config.xml file
- copy the config stanza to the live file: /etc/koha/sites/kohadev/z3950/config.xml
- restart_all
- ps aux | grep z3950
- confirm the script has restarted
- confirm the options: --add-item-status k -t 5 have been passed through
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 10 May 2024 14:14:59 +0000 (14:14 +0000)]
Bug 36830: Update delete -> cud-delete
1) Visit <staff_url>/cgi-bin/koha/tools/holidays.pl
2) Select "Holiday only on this day" (or whatever other option to add an holiday). Click 'Save.
3) Now click on that day in the calendar, pick "delete this holiday". Click 'Save'. Notice the holiday is still there.
4) Apply patch. Repeat. Notice its deleted.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Sun, 18 Feb 2024 17:25:33 +0000 (17:25 +0000)]
Bug 33737: Fix undefined variable issues
This patch resolves the undefined bookings_table variable issue reported
and also further fixes a subsequent undefined timeline bug that was
exposed by the original fix.
Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 7 Dec 2021 14:38:06 +0000 (14:38 +0000)]
Bug 33737: Add bookings tab to patron details
This patch adds a new 'bookings' tab to the bottom of the members
details pages. When a patron has any future or current bookings against
their record the tab will display the number of bookings in the tab name
and on clicking the tab a bookings table will display the current and
upcoming bookings.
Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Fri, 10 May 2024 08:37:32 +0000 (08:37 +0000)]
Bug 35994: (QA follow-up) Fix Biblio.t
A follow-up changed orders->cancel a bit. This test assumed to
cancel completed lines here. So we are doing it now with a
direct update to have the original result.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 22 Feb 2024 12:48:55 +0000 (12:48 +0000)]
Bug 35994: Add $biblio->acq_status
This allows you to see quickly if a biblio has linked orders or not.
And if they are all cancelled, or some still in processing, or some
are complete (and the rest cancelled).
Test plan:
Run t/db_dependent/Koha/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:24:25 +0000 (14:24 +0000)]
Bug 30047: Unit tests
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:20:19 +0000 (14:20 +0000)]
Bug 30047: Add new heading field to auth_header table
This patch adds a new heading field containing the display form of the authority record
NOTE: If trying to save an auhority in the 'DEFAULT' framework, you will get an error, you should not be
using DEFAULT for authorities and we should remove from the list on another bug
To test:
1 - Apply patches
2 - Update database
3 - Restart all
4 - Create a new authority, save.
5 - Do this for various types
6 - View the db records:
SELECT * FROM auth_header\G
7 - Note new heading field is populated correctly
8 - Edit your new authorities
9 - Confirm the heading field is updated correctly
10 - Import some authorities and confirm heading generated correctly
11 - Import auth via Z39.50 and confirm heading generated correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:19:32 +0000 (14:19 +0000)]
Bug 30047: DB Updates
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 5 Apr 2023 12:49:59 +0000 (12:49 +0000)]
Bug 33418: Add overlay_framework option to connexion scripts
This patch adds the option to specify a framework to be used when overlaying records from webservices/connexion
To test:
1 - vim /etc/koha/sites/kohadev/connexion.cnf
2 - Set content:
host:
port: 8888
koha:http://localhost:8081
log:/var/log/koha/kohadev/connexion.log
match:ISBN
user:kohauser
password:kohapass
overlay_action:replace
nomatch_action:create_new
item_action:always_add
import_mode:direct
framework:BKS
overlay_framework:
debug:1
3 - Save the sample file from this bug into your kohaclone (or copy and paste into a file your koha test site can reach)
4 - On the command line:
perl misc/bin/connexion_import_daemon.pl -c /etc/koha/sites/kohadev/connexion.cnf
5 - In another terminal:
cat bug_33418.test | nc -v localhost 8888
6 - It should report success and a biblionumber
7 - In Koha: Cataloguing->Manage staged MARC record
8 - View the most recent batch with file name (webservice)
9 - Confirm it was imported, no match
10 - Click 'View' under the 'Record' column
11 - Confirm record loads correctly and 'MARC framework' detail is 'Books, Booklets, Workbooks'
12 - On the terminal repeat the command:
cat bug_33418.test | nc -v localhost 8888
13 - It should succed
14 - View the new batch, confirm the record matched this time
15 - View the record details, confirm framework is now 'default'
16 - On the first terminal hit Ctrl+C to stop the daemon
16 - Edit connexion.cnf and change:
import_mode:stage
framework:ACQ
overlay_framework:IR
17 - Restart daemon:
perl misc/bin/connexion_import_daemon.pl -c /etc/koha/sites/kohadev/connexion.cnf
18 - Delete the record created above
19 - On the second terminal repeat the command:
cat bug_33418.test | nc -v localhost 8888
20 - Confirm the batch is created, but not imported
21 - In terminal:
perl misc/cronjobs/import_webservice_batch.pl --framework=ACQ --overlay_framework=BKS
22 - Confirm batch imported, and record in ACQ framework
23 - In terminal:
cat bug_33418.test | nc -v localhost 8888
perl misc/cronjobs/import_webservice_batch.pl --framework=ACQ --overlay_framework=BKS
24 - Confirm batch added, record matched, record imported, and record now in Books framework
25 - Stop the deamon, edit connexion.cnf:
import_mode:direct
26 - Start the daemon, and on other terminal repeat:
cat bug_33418.test | nc -v localhost 8888
27 - Confirm record in Binders framework
28 - Set record framework to Books
29 - Stop daemon, edit cnf and remove 'overlay_framework' setting
30 - Start daemon and cat the file again
31 - Confirm the record remains in Books framework
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Julian Maurice [Tue, 2 Apr 2024 07:34:25 +0000 (09:34 +0200)]
Bug 36486: Add tests for Koha::DateTime::Format::SQL
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
One of the embeds refers to suggestions. This table also has
a quantity column.
Test plan:
Verify that Pending Orders table does load now instead of
triggering an internal server error on ambiguous column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 25 Mar 2024 09:46:06 +0000 (09:46 +0000)]
Bug 36018: (follow-up) Do not rely on assumed correct quantities
Now filter_by_active checks quantities, we should ascertain that
our test data is correct, not leaving it to random values from
TestBuilder.
Test plan:
Run t/db_dependent/Koha/Acquisition/Order.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 15:20:23 +0000 (15:20 +0000)]
Bug 36018: $orders->filter_by_active should check quantityreceived
An active order that has no items to receive any more is actually
not very active anymore :)
Test plan:
Run t/db_dependent/Koha/Acquisition/Orders.t
Enable OPACAcquisitionDetails.
Add order on basket for new biblio. Check that opac-detail does not
yet count the item as on order (since status is still new).
Close basket. Check opac-detail again. Should count it now.
Reopen basket. Cancel line. Check opac-detail again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 14:39:00 +0000 (14:39 +0000)]
Bug 36018: biblio->active_orders should be ->uncancelled_orders
Active orders are more than just not cancelled. See filter_by_active
in Koha::Acquisition::Orders. They are still in the acq process; we
still need to receive items on those orders.
When we cancel and want to delete a biblio, we should check for not
cancelled orders (broader than active orders as in Orders.pm).
Test plan:
Git grep active_orders.
Run t/db_dependent/Koha/Biblio.t
Run t/db_dependent/Koha/Acquisition/Order.t
Add two order lines in a basket referring to same biblio. Try to
cancel with delete biblio. Should not be possible.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 21 Feb 2024 12:34:50 +0000 (12:34 +0000)]
Bug 36018: Rename orders->filter_by_current
Current is a bit misleading here. It means the ones that are not
cancelled.
We already use the filter_out_etc naming schema. So in harmony with
that, we switch it to filter_out_cancelled.
Test plan:
Run t/db_dependent/Koha/Acquisition/Order.t
Run git grep -l '::Orders' | xargs grep filter_by_current
* All occurrences should be related to Recalls, not Orders.
Go to acqui/basket.pl. Delete a whole basket who has some active
and some cancelled lines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Thu, 25 Jan 2024 14:59:32 +0000 (14:59 +0000)]
Bug 35907: Add ability to log all custom report runs with or without query
Because of the way Koha::Logger has been used to log to different categories based on the interface and caller, it can be extremely hard to log all of a particular log statement to one place.
For custom report runs, the category is plack-intranet.C4::Reports::Guided when run from the web interface, cron.C4::Reports::Guided when run from runreport.pl, and plack-intranet.C4::Auth when run from svc/report.
We should add a more standardized report run log, both with and without the full query, so that administrators can log all report runs to a centralized location. If an administrator were to need the "point of entry" for reports, it is easy to include via parameters in PatternLayout.
Test Plan:
1) Apply this patch
2) Modify your log4perl file, add the following:
3) Restart all the things!
4) Run a report somehow:
CLI: ./misc/cronjobs/runreport.pl 1
API: /cgi-bin/koha/svc/report?id=1
Web: /cgi-bin/koha/reports/guided_reports.pl?reports=1&phase=Run this report
5) Note the report runs are logged to /tmp/report-time.log and /tmp/report-query.log
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Mon, 5 Feb 2024 10:20:04 +0000 (10:20 +0000)]
Bug 26567: (follow-up) Update label and add check for RoutingSerials
The system preference RoutingSerials controls if the routing list
feature is available in the staff interface or not. If routing lists
are deactivated, the search option should not show.
Also updated the label to read: "Has routing list"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
danyonsewell [Wed, 20 Dec 2023 04:15:06 +0000 (04:15 +0000)]
Bug 26567: Allow to limit subscription search to subscriptions with routing lists
Adds a search option to the advanced search in the
serials module that allows to limit search on subscriptions
with routing lists.
Test plan:
1. Apply this patch
2. Create two subscriptions, one with a routing list and one without
3. Navigate to Serials home and tick the checkbox labeled "Search routing lists only:"
4. Confirm that the only search result to appear is the subscription you added the routing list to
5. Run unit tests: prove t/db_dependent/Serials.t
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Perltidied changes to make QA test tools pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 9 May 2024 12:34:06 +0000 (13:34 +0100)]
Bug 36757: (QA follow-up) Fix for action on different triggers
This patch updates the 'title' and 'comment count' links to action the
same ticket detail/update modal as the 'details' button.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Paul Derscheid <paulderscheid@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 10 May 2024 12:36:25 +0000 (13:36 +0100)]
Bug 34655: (QA follow-up) Tidy the file
As we're already updating whitespace over almost the entire file, we may
as well go and tidy the whole thing too and add the /* keep tidy */
flag. (I checked for conflicts with existing bugs.. there's bug 20930
which will need a rebase, but it will already conflict and need a rebase
and is currently FQA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 10 May 2024 08:33:26 +0000 (10:33 +0200)]
Bug 34655: Prevent selenium/system_preferences_search.t to fail randomly
Removing this JS code from document.ready.
The script tag is at the end of the DOM and there is no good reasons (at
least I didn't find any) to wait for the whole document to be ready
before executing the JS code.
It made the selenium tests selenium/system_preferences_search.t to fail
randomly with:
# Failed test 'The first "Policy" section (under "Accounting") is currently expanded'
# at t/db_dependent/selenium/system_preferences_search.t line 63.
# got: undef
# expected: 'expanded'
# Looks like you failed 1 test of 6.
Because we set the class in this JS code and selenium won't wait for it
to finish before starting running the tests.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Thu, 21 Mar 2024 08:25:08 +0000 (09:25 +0100)]
Bug 36380: Add filter value on patron statistics report summary
Test plan:
1) Go to reports and select "Patrons"
2) Select some filters (patron category, library,..) and run it
3) Normally you will see filters selected but with blank value like
"branch code = "
4) Apply this patch
5) Refresh
Matt Blenkinsop [Wed, 8 May 2024 14:29:36 +0000 (14:29 +0000)]
Bug 34788: (QA follow-up)
This patch fixes a few things:
1) The blue dialog box now clears when navigating away from the page
2) The background job now uses skip_record_index to avoid queuing indexing jobs for every new biblio and instead queues one job at the end
3) Large files that get chunked now successfully create linked biblios if requested
4) Title matching rules have been expanded to check the package ID so that we can have duplicate titles in different packages
5) A link to the package is now included on the job report page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Tue, 30 Apr 2024 10:27:48 +0000 (10:27 +0000)]
Bug 34788: Allow import of file with additional columns
This patch allows a file with additional columns to be imported. When the file is submitted, the system will enqueue the background job and send back information to the UI that certain columns have been ignored. The data will stil l import as normal but only the standard KBART columns will be parsed and imported
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 17 Apr 2024 14:22:29 +0000 (14:22 +0000)]
Bug 34788: Make biblio creation optional
This patch rebases in the changes from bug 36618 to make biblio creation optional
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 19 Oct 2023 16:12:58 +0000 (16:12 +0000)]
Bug 34788: Allow for import of CSV files
This commit allows CSV files to be imported alongside TSV files.
It also adds some performance improvements relating to the max_allowed_packet and the matching of titles, as well as some small bugfixes and unit test changes
Test plan:
1) Enable the ERM module
2) Navigate to E-resource management > eHoldings > Local > Packages
3) Create at least one package
4) Navigate to E-resource management > eHoldings > Local > Titles
5) There should be a button for "Import from KBART file"
6) Click this button
7) Select the package that you created from the dropdown and then choose your KBART file using the "Choose file" button. I have attached some example files to the bug but feel free to use your own if you have them.
8) Click Submit
9) If your file is a valid file, a background job will be queued, if not then a warning will display showing what is incorrect in your file
10) To test the file format warning, edit your file and add a random column heading into the file e.g. test_column. When you upload it, the warning should show that an invalid column "test_column" has been detected
11) Click on the background job. (If you have uploaded a very large file, the system will chunk the file into smaller pieces and create multiple background jobs)
12) It should display a progress bar followed by a report and any error messages
13) Navigate to E-resource management > eHoldings > Local > Titles and you should see your new titles.
14) Run the unit test: prove t/db_dependent/Koha/BackgroundJob/ImportKBARTFile.t
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Mon, 16 Oct 2023 10:45:25 +0000 (10:45 +0000)]
Bug 34788: Add a relationship to a package for the imported file
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:39:45 +0000 (12:39 +0000)]
Bug 34788: Add unit test
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:36:40 +0000 (12:36 +0000)]
Bug 34788: Add a background job to import a KBART file
This patch adds a background job that will import a KBART file
Sponsored-by: UKHSA Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:35:08 +0000 (12:35 +0000)]
Bug 34788: Add Vue components, api client and navigation route
This patch adds a new component to handle the file import, a route to that component and the API client route needed to access the API
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 14 Sep 2023 12:34:06 +0000 (12:34 +0000)]
Bug 34788: Add an API endpoint to import a KBART file
This patch adds the endpoint needed to queue an import_from_kbart_file background job
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35925: Adjust default purchase suggestion notices to use TT
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Set syspref EmailPurchaseSuggestions to "email address of library"
4. Under Administration > Libraries, enter an email address for at least
one library
5. Go to "my account", and enter a Primary email and Phone number
6. Go to the Acquisitions module > Suggestions page
7. Click "New purchase suggestion", and fill in values for, at minimum:
Bibliographic information:
Title
Author
Copyright date
ISBN/ISSN
Publisher
Publication place
Collection title
Document type
Reason for suggestion
Notes
Acquisition information:
Library (set to the library you entered an email for in step 4)
Copies
8. Submit the suggestion
9. Set the suggestion status to "Rejected"
a. Check the checkbox next to the suggestion
b. Set the "Mark selected as" drop-down (below the table) to Rejected
c. Select a value for the "Reason" drop-down
d. Click the Submit button
10. Set the suggestion status to "Accepted" (as above)
11. Set the suggestion status to "Ordered" (as above)
12. Return to "my account" and open the Notices tab
--> There should be notices suggestion declined, suggestion accepted,
suggestion ordered, and (depending on settings) new suggestion*
13. Open each notice, and confirm the all information was filled in
correctly
* New suggestion will be there if you're using default KTD settings/data
and logged in as the root user. If it is not there, query the database
(by command line or SQL report) to see the generated notice text:
SELECT * FROM message_queue WHERE letter_code = 'NEW_SUGGESTION'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36106: Adjust DUE and PREDUE notices to use TT
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Item due:
- Check SMS
- Check Email
- Leave Digests only unchecked
Advance notice
- Select 1 day in advance
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Go to the checkout tab for that patron
6. Set a custom due date for today and check out an item
7. Set a custom due date for tomorrow and check out another item
8. Run the cron job to generate notices:
misc/cronjobs/advance_notices.pl -v -c
9. Open the Notices tab on that patron's account
--> The patron should have four notices:
Item due reminder (one for SMS and one for email)
Advance notice of item due (one for SMS and one for email)
10. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable SMS Notices
a) Find the system preference SMSSendDriver
b) Enter "Email" as the value for SMSSendDriver and save
4. Go to a patron account, and set the following messaging preferences:
Hold filled:
- Check SMS
- Check Email
- Leave Digests only unchecked
5. Leave SMS number and all email address fields blank for that patron
6. Place a hold for that patron
7. Check in an item to fill the hold
8. Open the Notices tab on that patron's account
--> The patron should have a Print "hold filled" notice, since they
don't have an email address or SMS number in the system
9. Add a Primary email and SMS number to the patron account
10. Place another hold for that patron
11. Check in an item to fill the hold
12. Go back to the Notices tab on that patron's account
--> The patron should now have Email and SMS "hold filled" notices as well
13. Open each notice and confirm that all information is correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36113: Adjust default RENEWAL notice template to use TT
Test plan:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Enable the system preference RenewalSendNotice
4. Check an item out to a patron
5. Edit that patron:
a. Enter a value for Primary email
b. Set messaging preference to enable email notices for Item
checkout and renewal
6. Renew the checked-out item
7. Check the patron's Notices tab for the Item renewal notice, and
confirm that the notice is correct
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Find a patron and make sure their account contains values for
all of the following fields:
First name
Surname
Card number
Phone
Address
Address 2
City
Zipcode
Email
4. Place a hold for this patron, specifying a hold note
5. Check in an item to fill the hold and click "Confirm and print slip"
6. Confirm that all information on the hold slip is correct
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36608: Adjust TO_PROCESS and AVAILABLE to use TT
To test:
1. Apply patch
2. reset_all (or start your testing environment in the first place)
3. Go to "my account", and enter a Primary email
4. Under Administration > Libraries, enter an email address for at least
one library
5. Add the demo user (koha) as the owner of the Main Fund
a) Go to the Acquisitions module
b) Click on Main Fund
c) Click the Actions button at the end of Main Fund row > click Edit
d) Click "Select owner"
e) Search for "koha"
f) Click the Select button
g) Click Submit
6. Click "Suggestions" on the left side of the page, and click "New
purchase suggestion"
7. Fill in values for, at minimum:
Bibliographic information:
Title
Author
Acquisition information:
Library (set to the library you entered an email for in step 4)
Fund (set to Main Fund)
9. Submit the suggestion
10. Run the cron job to generate TO_PROCESS notification email:
misc/cronjobs/notice_unprocessed_suggestions.pl -v -c --days=0
11. Set the new suggestion to "Accepted"
a) Check the checkbox next to the new suggestion
b) Below the table, set "Mark selected as" drop-down to "Accepted"
c) Click Submit
12. Create an order from the purchase suggestion
a) Return to the Acquisitions homepage
b) Leave the Vendor field blank and click Search
c) Next to the sample basket (My Basket), click "Add to basket"
d) Click "From a suggestion"
e) Click "+ Order" next to the suggestion
f) Make sure there are values for all required item fields
g) Click "Add item"
h) Click Save
13. Close the basket and receive the order
a) Click "Close basket" and click "Yes, close"
b) Click "Receive shipments"
c) Enter a number in "Vendor invoice" and click Next
d) Check the checkbox next to "My Basket" and click "Receive
selected" button
e) Check the checkbox under "Receive?" in the Items table
f) Click Confirm
14. Return to "my account" and open the Notices tab
--> There should be (among others) notices for "A suggestion is ready to
be processed" and "Suggested purchase available"
15. Open each of the above two notices, and confirm all the information
was filled in correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 9 May 2024 22:45:45 +0000 (15:45 -0700)]
Bug 36823: Switch database schema links in Reports from master to main
Test plan:
1. Reports > click Database schema link, verify it gets a 404 not foun
2. Reports > Use saved > click Database schema link, verify 404
3. Apply patch
4. Reports > click Database schema link, verify it loads as main
5. Reports > Use saved > click Database schema link, verify it loads
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 9 May 2024 23:31:56 +0000 (16:31 -0700)]
Bug 36824: Fix conversion of __VERSION__ in system preferences to use main rather than master
Test plan:
1. Administration > search system preferences for the words database columns
2. Click the links to schema.koha-community.org, note that they 404 with
/master/ in the URL
3. Apply patch, reset_all
4. Search again, click the links, note that they load successfully with /main/
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jan Kissig [Tue, 23 Apr 2024 18:19:05 +0000 (20:19 +0200)]
Bug 36676: SIP2 drops connection on unknown patron id in fee paid message
When sending a fee paid message to SIP2 with an unknown patron id it will respond with an empty response followed by dropping the connection to a client.
Test plan:
a) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 124447FT00USDBV0.01|AO|AA2352900100046|ACterm1|
Use of uninitialized value $data in concatenation (.) or string at /usr/share/koha/bin/sip_cli_emulator.pl line 355, <GEN0> chunk 1.
READ:
b) apply patch
c) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 125602FT00USDBV0.01|AO|AA2352900100046|ACterm1|
READ: 38N20240423 125602AO|AA2352900100046|AFInvalid patron barcode.|
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 12:25:49 +0000 (13:25 +0100)]
Bug 35812: Fix search URL aliases in Plack Apache config
Mimic missing stuff from apache-shared-opac.conf into apache-shared-opac-plack.conf, where /search and /opac-search.pl aliases were missing.
Note that while RewriteRule applies before reverse proxy directives and works, ScriptAlias applies purely to standard cgi perl scripts, meaning it didn't apply there.
Now it's mimicked analogously to how /index.html is configured.
This patch fixes an issue where someone might have just a reverse proxy to Plack configured without native Perl scripting, where this URL would then otherwise be failing.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 09:20:17 +0000 (10:20 +0100)]
Bug 35812: specify canonical URL for the main page
Currently main page can be accessed by:
- /
- /index.html
- /cgi-bin/koha/opac-main.pl
This specifies the canonical link for all of them to be "/", to aid search engines in assessing what's url to put in the index.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 09:16:06 +0000 (10:16 +0100)]
Bug 35812: Add canonical URL for biblio details page
This adds a nice canonical URL for search engines to use. Will prevent duplicates with different URL query parameters from getting indexed separately, will also prevent search engine confusion when opac-search.pl redirects to opac-detail.pl when there's just one result.
Should result in prettier/simpler URLs in the search engines too, plus removal of constant warnings in Google Search Console and other tools.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 27 Mar 2024 08:25:37 +0000 (09:25 +0100)]
Bug 35812: add noindex attribute to search result pages in OPAC
This will prevent search engines from putting the search results pages into their indexes, to prevent cluttering of the search results and give better visibility to the actual bibliographic records' pages.
Note that "noindex" is separate from "nofollow", meaning that the search engine is allowed to get and process the search results page and extract ("follow") further links from it, such as links to biblio records, which is exactly what we want.
This approach is better to the sitemaps, which search engines are free to choose whether to use or not, based on multiple factors such as the size of the page. In practice for small pages Google will just not download them at all, meaning that indexing by following links around is the only way the indexer will extract any links.
Note that for this to work properly, you must NOT block the affected pages in your robots.txt file (they're not blocked by default).
Also, this patch moves "cssinclude" block in opac-results.tt inside of <head>, because in all other templates it's inside, meaning its current positioning is a small mistake I fixed while at it.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Raphael Straub [Thu, 2 May 2024 09:19:32 +0000 (09:19 +0000)]
Bug 36503: (follow-up) Use the call method of Koha::Plugins
This removes the option to call multiple plugins in a prioritized order,
but this is not needed if there is only one plugin that uses this hook.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36503: (follow-up) Move the plugin hook to include the domain
This allows the plugin to read/change the domain.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Raphael Straub [Thu, 28 Mar 2024 12:31:15 +0000 (12:31 +0000)]
Bug 36503: Add a plugin hook after user authentication
This plugin hook allows to change patron data or define the patron
based on the authenticated user.
To test: Run
prove t/db_dependent/Koha/Auth/Client.t
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Thomas Klausner <domm@plix.at> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log