Owen Leonard [Tue, 9 Jun 2020 20:05:48 +0000 (20:05 +0000)]
Bug 25687: Switch Y/N in EDI accounts table for Yes and No for better translatability
This patch changes the list of EDI accounts shown in EDI administration
so that columns which previously used "Y" or "N" now show "Yes" or "No."
To test, apply the patch and go to Administration -> EDI accounts.
If necessary, add an EDI account. In the table of information about the
EDI account, the columns with information about quotes, orders,
invoices, responses, and auto-ordering should show "Yes" or "No" based
on the account's settings.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25346: Supress warning message when install dir exists
To see it enable verbose mode
To test:
1) Install lang with install dir
(cd misc/translator; ./tranlste install de-DE)
check message: "de-DE installer dir /...mysql/de-DE already exists."
2) Apply patch
3) Repeat 1, now message is gone
4) Repeat 1 in verbose mode (./translate install de-DE -v)
check the message now appears at the bottom.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Tue, 2 Jun 2020 11:08:23 +0000 (11:08 +0000)]
Bug 25582: Don't show OPAC problems entry on dashboard when there are no reports
This patch makes a minor correction to the template to correct the check
on outstanding OPAC problem reports. An error was preventing the check
from working correctly.
To test, apply the patch and enable the OPACReportProblem system
preference.
- On the staff interface home page, check the area showing pending
operations (suggestions, tags, etc.).
- If you have no pending OPAC problem reports there should be no line
for OPAC problem reports.
- If necessary, mark all pending OPAC problem reports closed and
confirm that when there are no outstanding reports the link is
hidden.
- Also test when there are no other outstanding reports in that
section (suggestions, tags, patron modifications), nothing appears
at all, not even the surrounding border.
- If necessary, test that the link appears when you have one or more
OPAC problem reports.
- Go to the OPAC and use the "Report a problem" to submit a test
report.
- Check that the staff interface home page reflects that there is
now a pending report.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Roberts [Sat, 9 May 2020 16:07:03 +0000 (16:07 +0000)]
Bug 22470: Missing the table name on misc/migration_tools/switch_marc21_series_info.pl
This patch adds the table name to the SQL update statements.
To test:
1) Apply the patch
2) Run the script. Check that there are no errors, and that the script
behaves as expected.
Signed-off-by: Andreas Roussos <a.roussos@dataly.gr>
Created a test record with values in field 440. Applied the patch, ran the
script with the -c -f flags and observed that the values were moved to field
490. Also, the relevant Koha to MARC mappings were changed accordingly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25394: Cronjob path in the AuthorityMergeLimit syspref description is wrong
Test plan:
1- Apply patch
2- Go to Administration > Global system preferences > Authorities
3- The path to merge_authorities.pl in the AuthorityMergeLimit
description should now read misc/cronjobs/merge_authorities.pl
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 21 May 2020 17:52:32 +0000 (13:52 -0400)]
Bug 25537: Page reload at branchtransfers.pl loses destination branch
At branchtransfers.pl, one selects a destination branch and scans in any
number of items to generate transfers to that branch. However, anything
that makes the page reload causes your branch selection to be lost,
reverting you back to whichever branch comes first alphabetically.
This is an invitation to error when one has a stack of books to
send all to the same branch. Could that error handling get moved
into a modal or something that won't reload the page?
Test Plan:
1) Place a hold on an item and set it to waiting
2) Initiate a branch transfer from branchtransfers.pl for any branch but
the first in the pulldown branch selector
3) Choose to cancel the hold and transfer
4) Note the pulldown reverts to the first option
5) Apply this patch
6) Repeat steps 1-3
7) Note the pulldown retains your preveiously selected branch!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Petro Vashchuk [Fri, 22 May 2020 15:11:28 +0000 (18:11 +0300)]
Bug 25587: fix for "clear" button to reset all selects
Button "clear" on cgi-bin/koha/admin/smart-rules.pl did not reset fields
with a dropdown selector except the first one.
This happens because jQuery selector .find("select option:first")
in koha-tmpl/intranet-tmpl/prog/en/modules/admin/smart-rules.tt
selects only single first element in the whole group, as from jquery
doc:
> The :first pseudo-class is equivalent to :eq( 0 ). It could also be
> written as :lt( 1 ). While this matches only a single element,
> :first-child can match more than one: One for each parent.
> (https://api.jquery.com/first-selector/)
And it works if replaced by: .find("select option:first-child")
To reproduce:
1) Go to /cgi-bin/koha/admin/smart-rules.pl
2) Start editing one of existing rules or filling a new one, change
all selects to have non-first option selected. Fill text input
fields with sample data.
3) Reset all fields with the "clear" button.
4) Observe that only the first dropdown field was reset to the first
option while all others still contain previously given values,
meanwhile all text input fields are cleared as expected.
5) Apply the patch.
6) Repeat steps 1, 2 and 3.
7) Check that all dropdown fields were reset to first option, as
expected.
Mentored-by: Andrew Nugged <nugged@gmail.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 28 May 2020 10:11:37 +0000 (12:11 +0200)]
Bug 25615: Remove empty entries in the filter dropdowns of "holds to pull"
On the "Holds to pull" view there are filters that are built on the
value of the cells.
Bug 22536 improved the ergonomic by adding a ul list, but the filters
are now broken, the ul and li tags are retrieved and put in the filter
list.
The idea of this patch is to remove the HTML tags and skip if the value
is then empty.
Test plan:
Place a hold on an item
Go to Home › Circulation › Holds to pull
Open the "libraries" filter
=> Without this patch you see empty entries
=> With this patch the filter contain only the libraries
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a missing transaction wrapping one of the subtests. This
is probably an oversight when refactoring this file.
To test:
1. Open the patron categories page
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> SUCCESS: Tests pass
3. Reload the patron categories page
=> FAIL: There's random data in there
4. Apply this patch and repeat 2
5. Reload the patron categories page
=> SUCCESS: The random data from the previous tests is still there, but
no new random data
=> SUCCESS: Tests still pass
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 4 Jun 2020 15:22:43 +0000 (15:22 +0000)]
Bug 25658: Print icon sometimes obscures patron barcode
This patch alters the style of the patron name/cardnumber label on the
checkout screen so that it has a maximum width. This will help avoid the
label being obscured by the print/close buttons displayed when
DisplayClearScreenButton is enabled.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Enable the DisplayClearScreenButton system preference.
- Check out to a patron. Resize the browser to confirm that at narrower
browser widths the patron name in the checkout form isn't obscured by
the print and clear screen buttons.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25675: Reword and reorganize sysprefs related to patron self modification
To Test:
1: apply patch
2: restart all
3: go to System Preferences > OPAC
4: confirm "Self registration" section is now labeled "Self registration and modification"
5: confirm OPACPatronDetails is now in the "Self registration and modification" section
6: confirm PatronSelfRegistration now reads "(Allow / Don't allow) library patrons to register for an account via the OPAC."
7: set OPACPatronDetails to Don't allow
8: set PatronSelfRegistration to Allow
9: log into the opac and verify you're not able to edit your patron details on an existing account
Signed-off-by: DonnaB <donna@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Tue, 9 Jun 2020 05:38:27 +0000 (15:38 +1000)]
Bug 25696: Correct "Test prediction pattern" HTML button
This patch corrects the closing tag for the "Test prediction pattern"
button from "</a>" to "</button>"
Test plan:
1. Apply the patch
2. Create a serial subscription from a new or existing bib record
3. Choose any frequency, numbering pattern, and subscription start
date you choose (ie fill out all mandatory subscription fields)
4. Click "Test prediction pattern"
5. Note that the prediction pattern appears on the right of the screen
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 12 May 2020 13:13:44 +0000 (15:13 +0200)]
Bug 20783: Similar changes for OPAC
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 12 May 2020 10:54:50 +0000 (12:54 +0200)]
Bug 20783: Use iframe to embed Youtube videos
WWW::YouTube::Download is broken and not reliable.
Other alternative was to use HTML::Video::Embed but not updated since
years.
The best alternative seems to follow youtube advise and use an iframe
https://developers.google.com/youtube/iframe_api_reference
Test plan:
Put youtube video in 856$u (using different url formats, youtu.be,
youtube.com/embed, etc.)
Enable HTML5MediaEnabled and HTML5MediaYouTube and confirm that the
youtube videos are correctly embeded.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Nov 2019 14:40:10 +0000 (15:40 +0100)]
Bug 23276: Do not display tag if pref TagsEnabled is off
If the pref TagsEnabled is off we should not display the tags at the
OPAC.
There is a message to tell that tags system is disabled, but the tags
are displayed.
We should redirect to 404 like we do in opac-topissues.pl and
opac-suggestions.pl.
Test plan:
- Turn TagsEnabled on
- Add some tags
- Turn TagsEnabled off
- Hit /cgi-bin/koha/opac-tags.pl
=> Without this patch you see a warning messaging saying that the tag
system is disabled, but the tags are displayed
=> With this patch you get a 404 redirect
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 25 May 2020 07:33:10 +0000 (09:33 +0200)]
Bug 25266: Fix error when no later order
If no late order we got:
"Argument passed to the 'IN' operator can not be undefined"
It highlights a context error
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 4 May 2020 11:17:34 +0000 (13:17 +0200)]
Bug 25266: Remove C4::Bookseller
This was the only occurrence of GetBooksellersWithLateOrders and it was
the only subroutine of C4::Bookseller
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 4 May 2020 11:13:56 +0000 (13:13 +0200)]
Bug 25266: Build the vendor list from the order list
This patch is removing the use of GetBooksellersWithLateOrders and use
the late order list to generate the vendors.
Test plan:
Create several vendors, several orders, close the baskets
Also create vendors that do not have orders (or basket not closed)
Go to the late orders page and confirm that the list of vendors is
correctly filled, select one, you can see the "select all" link in the
header of the table
QA: that would be good to test this with production data and compare
execution time.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Tue, 5 May 2020 18:04:11 +0000 (18:04 +0000)]
Bug 25349: Add checkEnter function and apply it to SCO page
This patch adds the checkEnter function to the OPAC global.js and then applies it to the SCO login page.
TO TEST:
1. Go to SCO login and try entering something in the "Login:" input amd "Password:" input.
2. Pressing enter while in either will automatically submit the form.
3. Apply patch.
4. Type something into the Login: field and press enter, the form should NOT submit.
5. Type something into the Password: field and pess enter, this SHOULD submit the form.
6. Change the syspref SelfCheckoutByLogin to 'Cardnumber'
7. Type something into the Please enter your card number: field, the form should submit.
Signed-off-by: Donnab <donna@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 26 May 2020 10:28:13 +0000 (12:28 +0200)]
Bug 25434: Display selections-toolbar on small screens
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Fri, 22 May 2020 23:22:53 +0000 (01:22 +0200)]
Bug 25507: Fix table in basket group PDF German 2-pages
A variable was doubled up which made the columns in the
table of orders no longer line up (different number of headers
to columns).
To test:
- Create at least one basket with one or more orders
- Close the basket
- Add the basket to a basket group manually or let Koha do it
on closing
- Change the OrderPdfFormat system preference to 'German 2-page'
- Go to the basket group page and print the PDF of the basket
- Verify the table of orders doesn't look right and runs outside
the page
- Apply patch
- Repeat the PDF print - now table should look right
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25521: Remove cart_to_shelf note from NewItemsDefaultLocation syspref
To test:
1- find the NewItemsDefaultLocation syspref
2- confirm it says "NOTE: This system preference requires the misc/cronjobs/cart_to_shelf.pl cronjob. Ask your system administrator to schedule it."
3- apply patch
4- restart all
5- reload syspref, it doesn't say that anymore!
Signed-off-by: Holly Cooper <hc@interleaf.ie> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 27 May 2020 10:38:03 +0000 (10:38 +0000)]
Bug 25545: Add adjustments to total tax included
Adjustments are not affected by tax, they are meant as a way to alter invoice
values after receiving (damaged items, refuneds, extra charges, etc)
When adjustments were added the tax included column was missed
To test:
- Add a basket with at least one order
- Close it
- Receive shipment
- Receive the order
- Finish receiving
- Add an adjustment of any amount
- Verify in the invoice details table:
- Total tax exc. is showing including the adjustmnt
- Total tax inc. is missing the adjustment
- Apply patch
- Reload
- Total tax exc. is showing including the adjustmnt
- Total tax inc. is showing including the adjustment
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Wed, 20 May 2020 17:59:16 +0000 (17:59 +0000)]
Bug 25555: Invert patron name in holdsqueue.tt
TEST PLAN:
1. Have multiple holds from multiple patrons and run the holds queue cron to populate the holds queue list.
2. Try sorting by patron and see that is sorts based on first name.
3. Apply patch
4. Try sorting again and now it should sort by surname.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Mon, 25 May 2020 06:25:06 +0000 (16:25 +1000)]
Bug 25597: Add missing Javascript libraries to sco printslip
This patch adds missing Javascript libraries to the self-checkout
print slip. These missing libraries were preventing the auto print
prompt and close. There was also a font error.
To Test:
0) Apply patch
1) Turn on system preference SelfCheckReceiptPrompt
2) Check out item via /cgi-bin/koha/sco/sco-main.pl
3) Click "Finish"
4) Press F12 on keyboard and choose Console
5) Note no Javascript errors
6) Note that print dialog appears and closes after
a print option is chosen
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 26 May 2020 08:50:31 +0000 (10:50 +0200)]
Bug 25599: Fix default value placeholders for UseACQFrameworkForBiblioRecords
The feature was there but a condition disabled it.
Test plan:
- modify the default value for 008@ or another subfield in the ACQ framework using one or more of the placeholders above
- activate UseACQFrameworkForBiblioRecords
- create a basket
- create an order from a new record
- verify the values have been replaced
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 10 Jun 2020 10:03:20 +0000 (12:03 +0200)]
Bug 25701: (bug 14419 follow-up) Always display facet groups in the same order
It seems that this regression comes from bug 14419, but I have not found
a logic reason behind that.
This patch restores the behaviour we always had: facet groups must be
displayed in a given order: the Zebra index (au, ccode, holdingbranch,
etc.)
Test plan:
Apply this patch, restart all and confirm that the facets are not moving
up and down when you refresh your search result page.
QA note:
I think the following line must be removed
@facets_loop = sort {defined $a->{expand} && defined $b->{expand} && $a->{expand} cmp $b->{expand}} @facets_loop;
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the API set more userenv params than just the
borrowernumber. To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth_*
=> SUCCESS: All tests pass
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24003: (follow-up) Move interface setting to a more readable place
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24003: Make the API set userenv on authentication
This patch makes the authentication step stash the user that got
authenticated so code outside the Mojo part of Koha can use it (i.e.
through the use of C4::Context->userenv).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds regression tests for the different authentication
mechanisms Koha supports. It highlights the fact that Koha expects
userenv to be set on authentication.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Mon, 8 Jun 2020 09:23:53 +0000 (10:23 +0100)]
Bug 25526: Equality matching is case sensative
TEST PLAN:
1. Have a fine on a Patron's account.
2. Choose the "Write off Selected" button
3. Enter an amount less than the amount owed by the patron.
4. Koha will give a yellow box with a note "You must collect a value
greater than or equal to 2.00." The $2.00 is the amount that is
attempted to write off (the amount less than the amount owed).
5. Apply patch
6. Again try to writeoff an amount less than the amount owed.
7. You should be able to write it off.
8. Try paying an amount more than owed, you should still get an
error. You shouldn't be able to write off more than the amount.
9. Follow the above steps via 'Pay selected' as aposed to 'Writeoff
selected'.
10. You should not be able to 'Tender' less than the amount you have
'Paid'.
11. Disable Javascript and run through all the above steps. You should
still be blocked where relevant.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Sat, 23 May 2020 14:35:45 +0000 (14:35 +0000)]
Bug 25492: Your Account Menu button does nothing on mobile devices
This patch removes some redundant code from the OPAC JavaScript which
was causing problems with the show/hide action on two controls which are
shown only at narrower browser widths: The "Your account" menu shown
when the user is on a user-related page, and the "Refine your search"
menu shown on the search results page.
To test, apply the patch and go to the OPAC. Narrow your browser width
to below 768 pixels.
- Perform a search.
- On the search results page you should see a "Refine your search"
link at the top of the results. Clicking it should expand and
collapse the facets menu.
- Log in to the OPAC.
- On the "Your summary" page there should be a "Your account menu" link
at the top of the main part of the page. Clicking it should expand
and collapse the account menu.
- Verify that these menus display correctly when you widen and narrow
the browser window.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Tue, 26 May 2020 02:30:53 +0000 (12:30 +1000)]
Bug 17842: UTF-8 encode ISO2709 MARC download from cart
The cart was outputing ISO2709 MARC records with Latin-1
encoding. Records containing non-latin1 characters were
automatically re-encoded as UTF-8 by browsers, which led to
inconsistent character encodings for downloaded MARC files.
This patch explicitly encodes ISO2709 MARC characters from
the cart download as UTF-8 encoded bytes, which resolves the problem.
Test Plan:
0) Don't apply patch
1) Create bib record with only ASCII characters
2) Add a ü character to the title
3) Save bib record
4) Download bib record from cart (opac and staff client)
5) Using xxd or some other program, note that the ü is
represented by a FC byte (latin-1 encoded)
6) Apply the patch
7) Download bib record from cart (opac and staff client)
8) Using xxd or some other program, note that the ü is
represented by C3 BC bytes (utf-8 encoded)
9) Success
(Note that you could potentially use Notepad++ or some other
program to open the downloaded file and just note the encoding
that it finds. You could also try "chardetect" instead. Lots
of options for figuring out the encoding.)
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 2 Jun 2020 14:00:25 +0000 (14:00 +0000)]
Bug 25653: Update tab selector to use 'active' and include all options
It looks like the functionality was broken when ui tabs were upgraded
and mainmainentry was added
To test:
1 - Browse to Authorities
2 - Search in each tab
3 - Note all search results revert to 'Search main heading a only'
4 - Apply patch
5 - Note selection is retained after search
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 16 Jul 2015 16:14:42 +0000 (12:14 -0400)]
Bug 14543: Order lines updated that have a tax rate not in gist will have tax rate set to 0!
If the tax rate for a given order line has been removed from the system
preference gist, that tax rate will show in the pulldown as 0. If a
librarian then saves the order line the original tax rate will be
overwritten with 0%!
Test Plan:
1) Find an order line
2) Remove the tax rate set for that order line from the syspref gist
3) Edit the order line
4) Note the tax rate is 0
5) Apply this patch
6) Edit the order line
7) Note the tax rate now displays with a warning
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Mon, 1 Jun 2020 23:53:06 +0000 (09:53 +1000)]
Bug 25634: Warn if koha-shell returns non-zero in koha-foreach
By putting koha-shell in an if statement, "set -e" will no longer
cause the entire koha-foreach program to exit, if koha-shell
returns a non-zero status.
If a non-zero status is returned, we warn on it, and the caller
of koha-foreach can interpret that command visually.
To Test:
1) Write a shell script that says "Hello" and then exits with a 1
status
2) Run koha-foreach against that shell script with multiple instances
available to koha-foreach
3) Before the patch, koha-foreach will die after the first "Hello"
4) After the patch, koha-foreach will continue, through all the
instances, and report which instances returned non-zero statuses
by which command.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 8 Jun 2020 12:14:22 +0000 (14:14 +0200)]
Bug 25693: Set correct permissions on logdir after an upgrade
Since bug 25172 we are failing loudly if the permissions are not correct
and that the logger cannot init successfully.
We must set the correct permission on upgrading.
koha-create deals with new installs
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 4 Jun 2020 18:43:58 +0000 (14:43 -0400)]
Bug 25677: Checkbox options for EDI accounts cannot be enabled
Checking any of the checkboxes in the EDI Account editor does nothing.
They always remain set to "off".
Test Plan:
1) Browse to edi_accounts.pl
2) Create a new EDI account, check all the checkboxes
3) Edit the account, note none of the checkboxes are checked
4) Apply this patch
5) Repeat steps 1-2
6) Note the checkboxes remain checked
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Thu, 21 May 2020 23:42:01 +0000 (23:42 +0000)]
Bug 25557: Correct basket.pl column config
This patch corrects the column configuration tool for basket.pl
TO TEST:
1. Go to Acquisitions and look at basket.pl
2. Open another tab and go to column configuration and try to hide some columns like Quantity.
3. See that the wrong columns are being hidden.
4. Apply patch
5. Trying hiding each column in the table and make sure the correct one is being hidden.
6. Rejoice!
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Tue, 2 Jun 2020 11:32:10 +0000 (15:32 +0400)]
Bug 25651: Fix modification of authorised value
When modifying an existing authorised value, the category is not
correctly passed to the template and so it is not passed to the
POST request, which results in the authorised value switching to
category '', which effectively make it disappear from the interface.
This patch fixes that.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 9 Jun 2020 16:49:54 +0000 (12:49 -0400)]
Bug 25707: (bug 11529 follow-up) Do not update marc mappings, print old mappings to upgrade log
This patch removes the update of marc frameworks from the updatedatabase script and warns the
"MARC to Keyword" (fieldmappings ) to the upgrade log so they can be replaced manually
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 10 Jun 2020 11:21:42 +0000 (13:21 +0200)]
Bug 25538: Default to --login|-i if no command passed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 10 Jun 2020 09:17:34 +0000 (11:17 +0200)]
Bug 25538: Use sudo -i in koha-shell
See man sudo, -i parameter.
Should we expect regressions?
Test plan:
0. Use D11 or U18.
Don't apply this patch
1.
$ echo $KOHA_INTRANET_URL
$ sudo koha-shell kohadev
$ echo $KOHA_INTRANET_URL
2. Apply this patch
$ cp debian/scripts/koha-shell /usr/sbin/koha-shell
3. Repeat 1.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 10 Jun 2020 08:50:05 +0000 (10:50 +0200)]
Bug 25538: Don't run search_utf8.t if KOHA_*_URL empty
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 9 Jun 2020 14:15:04 +0000 (16:15 +0200)]
Bug 25638: Make the tests pass - ignoring the actual issue
The API related tests still don't pass with the previous modifications.
They pass on D10 but fail on U18 and I did not manage to find where the
problems come from.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 5 Jun 2020 14:09:46 +0000 (16:09 +0200)]
Bug 25638: Fix regression
Now that float/decimal columns are not treated similar to integer ones,
the default value handling we had set for numeric values is not trapping
the float/decimal cases as it should.
We love tests!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that there is another error on U20 for acquisitions_orders.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 25638: Add tests for JSON conversion vs DBD::mysql
We have the situation of needing to cast numbers so they are not
confused in JSON with strings by DBD::mysql returning them with the
wrong internal flags.
We have also recently removed the cast, and adding it back now.
This test could help us detect this situation in case we make changes in
the area, and even on specific libraries versions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 1 Jun 2020 10:54:03 +0000 (12:54 +0200)]
Bug 25641: Fix Koha/XSLT/Base.t failures on U20
There is a change in the version number.
On U20 we get
Opening and ending tag mismatch: a line 0 and b
On others (D9, D10, U18) we get:
Opening and ending tag mismatch: a line 1 and b
I did not find where it did come from, so assuming it's just a minor
change and won't have side-effects.
Test plan:
Make sure the tests pass on U20 and another OS
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mason James [Sun, 24 May 2020 03:16:20 +0000 (15:16 +1200)]
Bug 25591: Update list-deps for Debian 10 and Ubuntu 20.04
This patch removes version-specific packages from the debian/control file,
which fixes a bug where koha-common can only be installed on the debian
version that the package was built on
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Devinim [Fri, 22 May 2020 22:11:31 +0000 (22:11 +0000)]
Bug 25592: Add Devinim to about page
This adds Devinim to the 'Contributing companies and
institutions' section on Koha's about page.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 28 May 2020 13:30:02 +0000 (15:30 +0200)]
Bug 25618: Fix wrong package install path for misc dir
root@koha-debian9:/# koha-z3950-responder --start d9
[....] Starting Z39.50/SRU daemon for d9:Can't open perl script "/usr/share/koha/bin/z3950_responder.pl/z3950_responder.pl": Not a directory
failed!
Test plan:
On a dev install, copy the debian script and run it
Same on a package install
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Thu, 28 May 2020 17:37:20 +0000 (17:37 +0000)]
Bug 25617: (QA follow-up) Add responses to tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 28 May 2020 14:12:57 +0000 (16:12 +0200)]
Bug 25617: (bug 25133 follow-up) 12 PM is not 24 but 0
There was an error in the precedent code, in 12hr format, 12PM is
actually 00:00
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 22 May 2020 12:29:20 +0000 (14:29 +0200)]
Bug 25513: Remove unneeded integer casting in Koha::Object->TO_JSON
This patch removes a problematic integer casting happening in TO_JSON.
The original need for this cast (a DBD::mysql bug) is now fixed. We
remove the cast as it is causing random failures.
To test:
1. Apply the regression tests
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/acquisitions_orders.t
=> FAIL: Tests fail with select high values (i.e. casting gives wrong
results)
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests now pass!
5. Sign off :-D
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 26 May 2020 08:10:52 +0000 (10:10 +0200)]
Bug 25601: (bug 18928 follow-up) Fix "Unset" for "return policy for $branch"
returnbranch has to pass an itemtype key when setting the rule (here
setting it to unlimited for any item types)
Test plan:
1. Go the "Circulation and fine rules" admin page
2. Set a rule for "Default checkout, hold and return policy"
3. Unset it
4. Select a library
5. Set a rule for "Default checkout, hold and return policy"
6. Unset it
Display should be consistent with what you selected
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan :
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1'
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2'
- Create a file 'barecodes.txt' containing 2 lines '000AAA1' and '000AAA2'
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Choose file in 'Barcode file'
- Enter item callnumber between 'ZZZ' and 'ZZZa'
- Check 'Compare barcodes list to results'
- Submit
=> without patch, you get an error trace
- Apply patch, it works
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended commit title. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code set the *_storage fields when adding new
fields to an existing course item. And reverts those fields correctly
when removing the item from the course.
If a new field is enabled on an existing course reserve, the storage
field is not given a value, so when the item goes off reserve, the
item field will always be updated to NULL.
To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/CourseReserves/CourseItems.t
=> FAIL: Tests fail, data is not reverted correctly
3. Apply this patch and repeat 2
=> SUCCESS: Tests pass! Data is correctly reverted
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 26 May 2020 17:04:11 +0000 (13:04 -0400)]
Bug 25444: Add unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Petro Vashchuk [Mon, 25 May 2020 14:39:58 +0000 (17:39 +0300)]
Bug 25556: fix for unnecessary empty name/value pairs creation
During the web-install onboarding process, when the default circulation rule gets created, "circulation_rules" table gets populated with empty rule_name/rule_value items. This behavior differs from how the "unset" button on the smart-rules.pl page in "Default checkout, hold and return policy" group acts and leads to unpredictable bug when empty "holdallowed" rule_name prevents holds from any user.
This fix removes creation of these empty name/value pairs.
To reproduce:
1) Start with an empty installation (or delete all circulation rules and press "unset" in hold and return policy section on /cgi-bin/koha/admin/smart-rules.pl page). This is to have the circulation_rules table empty so onboarding.pl will work.
2) Go through the onboarding.pl process and create a default circulation rule.
3) Make sure that circulation_rules table contains will contain empty "patron_maxonsiteissueqty", "max_holds", "patron_maxissueqty", "returnbranch", "holdallowed" and "hold_fulfillment_policy" fields.
4) Apply the patch.
5) Repeat steps 1 and 2.
6) Observe that there are none of six mentioned above name/value pairs appeared.
To reproduce the bug with empty "holdallowed" rule_name:
1) Repeat steps 1, 2 and 3 that are listed in the previous instruction of reproduction, in order to get empty "holdallowed" field.
2) Find existing or create a new book with available status and place a holding on it.
3) Observe the yellow notification window with "Cannot place hold. No items are available to be placed on hold." warning.
4) Apply the patch.
5) Repeat steps 1 and 2.
6) Observe that hold was successfully placed and yellow notification does not appear anymore.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Fri, 22 May 2020 14:45:02 +0000 (16:45 +0200)]
Bug 25517: Look in all possible places for MO files
On a 'dev' install, MO files will be installed in
<intranetdir>/misc/translator/po
On 'standard' and 'single' installs, they will be installed in
<intranetdir>/../../misc/translator/po
This patch makes Koha::I18N try to use the "dev" directory first, and
fallback to the "standard" directory.
If none of these directories exist, it dies.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 22 May 2020 13:49:06 +0000 (14:49 +0100)]
Bug 24380: (RM follow-up) Fix update statement to prevent regression
The update statement did not respect the original value of
CalcalateFinesOnReturn and so would result in an unexpected functional
change during upgrades.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 22 May 2020 11:09:29 +0000 (12:09 +0100)]
Bug 23975: (RM follow-up) Comment example configuration
As promised, I am commenting out the configuration for git repositories
to use for searches by default prior to release. To enable the feature,
simply uncomment the relevant github repositories or add your own.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
projects / koha.git / log