Björn Nylén [Fri, 1 Apr 2022 14:13:47 +0000 (14:13 +0000)]
Bug 32392: Enable skipping forward issues when receiving serials.
This patch adds the ability to skip forward issues when receiving and generating the next issue
from both the serial receive page and serial collection page.
To test:
1. Apply patch.
2. Set up a subscription for a bib record.
3. Go to Serials -> Search your subscription -> Serial receive
4. Note that below last expected issue there will be checkbox to toggle a field to
specify how many issues to skip when recieving and generating the next.
5. On serials-collection page there is also a button 'Skip issues and generate next'.
When pressed will open a modal promting how many issues to skip.
6. Generate issues with different values and make sure the correct issue is generated.
Sponsored-by: Lund University Library Sponsored-by: Bibliotek Mellansjö, Sweden Co-authored-by: Johan Sahlberg <johan.sahlberg@tidaholm.se> Signed-off-by: Marie Hedbom <marie.hedbom@musikverket.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It appears this bug introduces the first actual use of this function in
the OPAC and thus exposes that bug 31261 didn't fully port the
Date_from_syspref from the intranet.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 5 Feb 2024 13:36:21 +0000 (13:36 +0000)]
Bug 35993: Apply new routine to ModBiblioMarc
Now both AddBiblio and ModBiblio will insert 005 if not present.
Test plan:
Run t/db_dependent/Biblio.t
Add biblio record via acquistion order. Check 005 in the table
biblio_metadata.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Note: This routine does not check field existence like
ModBiblioMarc does/did (see next patch). So it inserts
a field 005 if it is not present.
Test plan:
Run t/SimpleMARC.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 22 Apr 2024 16:10:46 +0000 (16:10 +0000)]
Bug 31671: Add print slip button to transfer page
This patch reimplements/rebases Lucas' patch and adds a style
modification to the button.
To test:
1. Apply patch
2. Go to Circulation / Transfer
3. Try transfering some items and notice the 'Print slip'
button
4. Try clicking on it and make sure it generates correctly and with the
correct information on the slip
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 22 Apr 2024 17:46:52 +0000 (17:46 +0000)]
Bug 36671: (follow-up) remove stray anchor tag
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 22 Apr 2024 16:05:50 +0000 (16:05 +0000)]
Bug 36671: (follow-up) Add markup comments
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 22 Apr 2024 16:05:21 +0000 (16:05 +0000)]
Bug 36671: Reindent item transfer template (branchtransfers.tt)
This patch reindents the item transfer template so that it has
consistent indentation, with tab indentation coverted to space.
To test, apply the patch and go to Circulation -> Transfer. Test some
transfers, including transfers which trigger a hold notification.
Everything should work correctly.
If you view the diff while ignoring whitespace the only changes should
be places where line breaks were introduced.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 22 Apr 2024 15:53:57 +0000 (15:53 +0000)]
Bug 36663: Hide specific inner elements, not the whole top pager container
1- Enable StaffDetailItemSelection
2- Visit a biblio page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=76
3- Notice there are no table configuration options on the top right (Columns, Export, Configure).
4- Click the "Show filters" link, notice the table configuration options now show, as well as top and bottom pagers, column filter inputs and search input.
5- Disable StaffDetailItemSelection
6- Visit a biblio page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=76
7- Notice that the table configurations options are visible, as well as top and bottom pagers, and search input.
8- Click the "Show filters" link, notice it now only governs the column filter inputs, the other elements mentioned in step 7 are always visible.
9- Apply patches, run yarn css:build
10- Repeat 1 and 2.
11- Notice the table configuration options are shown on the top right, and no other table options exist.
Further testing:
Test clicking hide/show filters
Test with StaffDetailItemSelection enabled/disabled
Test other datatables in other pages
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 22 Apr 2024 15:53:11 +0000 (15:53 +0000)]
Bug 36663: Update alignment of datatable buttons
Pack items from the end
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 22 Apr 2024 15:50:34 +0000 (15:50 +0000)]
Bug 36663: Adjust datatable button selector
This change makes the selector apply specifically to the 'clear filter' button, instead of whatever is the first button as 'clear filter' may or may not exist.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 30598: remove all the console.log redundancies
Please test the patch. Thank you!
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 30598: Replacement cost is not copied from retail price when ordering from file
Test plan :
To test :
1- In Acquisitions, create a basket
2- Add an order from a new (empty) record
--> Note that when you enter the "vendor price", it is copied in the "replacement cost" field
3- Add an order from a new file
--> Note that when you enter the "price", the "replacement price" field stays empty
4- Apply the batch
5- Redo step 3 and notice that when you change the 'price', the
'replacement price' syncs with it
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 21 Nov 2023 11:46:17 +0000 (11:46 +0000)]
Bug 34792: Improve flexibility of CookieConsentBar layout
This patch makes CSS and markup changes to the CookieConsentBar, in both
the OPAC and staff interface, so that the layout of custom text and
buttons works better with varying text content and varying browser widths.
The patch also adds some JavaScript to the OPAC so that the cookie
consent bar interacts better with the language selection footer. When
the language selection footer is visible, the cookie consent bar should
"stick" to the bottom of the viewport except when the page is scrolled
all the way down. When the page is scrolled all the way to the bottom
the cookie consent bar should move to the top of the language selection
footer.
To test, apply the patch and rebuild the OPAC and staff interface CSS.
- Go to Administration -> System preferences and enable the
CookieConsent preference if necessary.
- Follow the link in the preference description to HTML customizations.
- Create an HTML customization in the CookieConsentBar display location.
Add a paragraph of text.
- Go to the OPAC. If you don't see the cookie consent bar at the bottom
of the screen you may need to clear your browser cookies and local
storage.
- Confirm that the text flows well in relation to the buttons: With a
lot of text, the text expands to fill the width of the cookie consent
bar and the buttons are below. With a small amount of text, the text
and buttons should be side by side.
- Test that this layout adapts well to various browser widths.
- Perform the same tests in the staff interface.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 20 Nov 2023 17:22:51 +0000 (17:22 +0000)]
Bug 34792: (Preparation) Run stylelint fixes on cookie consent CSS
This patch applies automated stylelint fixes to the OPAC CSS which was
added when the Cookie Consent feature was added. No other CSS has been
changed.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 12 Feb 2024 08:01:26 +0000 (08:01 +0000)]
Bug 10758: Show title of deleted biblio on basket page
Test plan:
Find a completed order line and a cancelled one with deleted biblios.
Goto acqui/basket.pl
Check if you see the title if deleted_biblionumber is filled.
Bug 36615: Terminology: use 'on hold' instead of 'reserved' in OPAC self checkout
This patch changes the term 'reserved' to 'on hold' in the OPAC self
checkout feature.
To test:
1. Apply patch
2. Place a hold for a patron
3. Enable OpacTrustedCheckout
4. Log into the OPAC as another patron
5. Click Self checkout at the top of the page
6. Paste the item's barcode in the text input
7. Click 'Submit'
8. Make sure the warning sentence is correct and there are no spelling
errors
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 26 Apr 2022 11:29:13 +0000 (11:29 +0000)]
Bug 30623: Copy permissions from one user to another
This patch adds controls to the patron "Set permissions" page allowing
the user to copy a set of permissions from one patron to another.
The patch also makes a minor correction to global staff interface CSS to
correct the appearance of non-primary split buttons.
To test, apply the patch and rebuild the staff interface CSS. You may
want to clear your browser cache.
- Locate a patron in the staff client and choose More -> Set
permissions. You might want to start with a staff patron who has
multiple permissions enabled.
- You should see two new buttons in the toolbar immediately above the
list of permissions: "Copy settings," a split button with a secondary
option to choose "Forget copied settings"; and "Paste settings" which
should be disabled by default.
- Clicking the "Copy settings" button should trigger the copy icon to
cycle/fade from the copy icon to the check-mark icon and back to the
copy icon. I thought this interaction needed some visual feedback
since it doesn't otherwise trigger visible action.
- Clicking the "Copy settings" button should also enable the "Paste
settings" button.
- Locate another patron, preferable one with permissions visibly
different from your first choice.
- On their "Set permissions" page, click the "Paste settings" button.
The list of permissions should expand all settings and all the
checkboxes should now match your original choice.
- At this stage you could find another patron and paste the same
permissions again.
- Click "Copy settings -> Forget copied settings." The "Paste settings"
button should become disabled.
- Using the browser console to check the contents of Local Storage
should confirm that the "copiedPermissions" entry has been removed.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 2 Nov 2023 11:15:52 +0000 (11:15 +0000)]
Bug 19097: (follow-up) Fix typo 'altough'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 30 Oct 2023 13:00:01 +0000 (13:00 +0000)]
Bug 19097: Adjust some GetMarcFromKohaField calls
We need to:
[1] Remove obsolete framework parameters if any (yes there are).
[2] Check scalar context calls if any (most probably not).
Ad 1:
How to find them? Git grep and look at each hit. You will need the -C
parameter to add a few context lines around the call even.
Found one in C4/Biblio.pm and six in Suggestions.t with ''.
Found one in C4/Items on a second line. Similar one in Koha/EDI.
Note: sub receipt_items in EDI has no unit tests yet.
Also did a few git searches like:
git grep GetMarcFromKohaField | grep -v -P "GetMarcFromKohaField.*;"| grep -P "GetMarcFromKohaField\s*\("
Note: Seeing still three lines; they are all fine. Last line comes from
testing to trigger the warn.
Ad 2:
Have been looking at each git grep line and did not spot any
scalar context call. Before this report, we had an example in
POD and the Biblio test only.
Try to find them by performing smarter git searches?
Did look again at results for:
git grep GetMarcFromKohaField | grep -v -P "\)\s*=\s*&?(C4::Biblio::)?GetMarcFromKohaField" | grep -v -P "use "
The tests from this grep are included in the last test plan line.
Test plan:
Read the patch.
Run t/db_dependent/Biblio/TransformHtmlToMarc.t
Run t/db_dependent/Items.t
Run t/db_dependent/Suggestions.t
Run prove t/Biblio2.t t/db_dependent/Biblio.t t/db_dependent/Filter_MARC_ViewPolicy.t t/db_dependent/Koha/Authorities.t t/db_dependent/Koha/Biblio/Metadata.t t/db_dependent/Koha/Filter/EmbedItemsAvailability.t t/db_dependent/Koha/SearchEngine/Search.t t/db_dependent/XISBN.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 30 Oct 2023 14:11:17 +0000 (14:11 +0000)]
Bug 19097: Remove wantarray from GetMarcFromKohaField
The routine should be called in list context now.
Warns also about use of obsoleted framework parameter. This
is the case for several years already btw. But may help us
catch a forgotten occurrence? Can be removed later.
In a follow-up we will check for second parameters and
we will update calls in scalar context.
Test plan:
Prove t/db_dependent/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 30 Oct 2023 13:20:14 +0000 (13:20 +0000)]
Bug 19097: Remove wantarray from GetMarcSubfieldStructureFromKohaField
Replacing wantarray by always returning all mappings.
In a few cases only we expect multiple ones.
Changing two calls to pick the first hit, and add comment about
the implicit assumption being made (as before, no behavior change).
Test plan:
Look at results of git grep GetMarcSubfieldStructureFromKohaField
Run t/db_dependent/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 22 Dec 2023 18:52:57 +0000 (18:52 +0000)]
Bug 35646: Unit tests
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 22 Dec 2023 18:20:09 +0000 (18:20 +0000)]
Bug 35646: Allow use of publication date fields in serial numbering pattern
This patch extends the numbering pattern field to accept subsititutions for:
{Year} {Day} {DayName} {Month} {MonthName}
These fields are based on the publication date for the serial issue.
To test:
0 - Apply patch
1 - Setup a enw numbering pattern
Serials->Manage numbering patterns + New numbering pattern
2 - In the numbering formula enter: {X} {Y} {Z} {Year} {Month} {Day} {MonthName} {DayName}
3 - Populate X/Y/Z in the table as you wish, these should be unaffected by patch
4 - Set a Frequency / First issue plublication date / Subscription length
5 - Click 'Test pattern'
6 - Confirm the dates in the Number match the publication date values
7 - Try with different frequencies to confirm they match
8 - Save the pattern
9 - Create a new subscription and use the new pattern
10 - Confirm it works as expected
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Thu, 25 Jan 2024 08:50:28 +0000 (09:50 +0100)]
Bug 35903: In cataloguing authority plugin using autocomplete must set operator exact
When cataloguing and using authority plugin, there is auto-completion on inputs and default operator is "contains".
When using auto-completion and selecting a result it would be logical to set operator "exact".
See doc https://api.jqueryui.com/autocomplete/#event-select
This patch also adds auto-completion missing on "Search all headings".
Test plan:
1) Create a new authority Topical Term with heading "Cart"
2) Create a new authority Topical Term with heading "Carthage"
3) Create a new biblio record
4) Use authority plugin on field 650
5) You see current operator are "contains"
6) Enter "Car" in "Search main heading ($a only):"
7) You see auto-completion showing "Cart" and "Carthage"
8) Click on "Cart"
9) You see operator changes to "is exactly"
10) Submit form to see the results
11) Clear form and repeat 6-9 for the three other inputs
Signed-off-by: Michelle Spinney <mspinney@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Sat, 16 Dec 2023 16:11:50 +0000 (16:11 +0000)]
Bug 35586: Added the collection to the location column in the OPAC cart
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Mon, 8 Jan 2024 16:57:20 +0000 (17:57 +0100)]
Bug 35727: Remove unused code in HoldsQueue::MapItemsToHoldRequests
Test plan:
prove t/db_dependent/HoldsQueue.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Mon, 29 Apr 2024 07:35:17 +0000 (07:35 +0000)]
Bug 36499: (follow-up) Update "Date last borrowed" to "Last checkout date"
This makes the description on the item search form match with
the column name in the results and avoids the "borrow" for the
more Koha common term "checkout".
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Thu, 4 Apr 2024 13:26:06 +0000 (13:26 +0000)]
Bug 36499: Added datelastborrowed column to item search results
Test plan:
1. Apply patch
2. Checkout an item to a patron
3. Perform an item search and either search as is, or add a “Last checkout date:” of today’s date for a more refined search.
1. Notice that there is now a date last borrowed column by the date due column
2. Export the table into a CSV and notice that there is also a date last borrowed column there
4. Sign off and have an amazing day :D
Nick Clemens [Tue, 16 Apr 2024 03:50:21 +0000 (03:50 +0000)]
Bug 36605: Add update_lastseen to handle_patron_status for SIP
This patch extends the TrackLastPatronActivity trigger to cover SIP status messages as well.
Other SIP messages like Checkin/Checkout should be covered by those values in system preference, so
should not need adjustment.
To test:
prove -v t/db_dependent/SIP/Message.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Wed, 6 Dec 2023 17:26:27 +0000 (17:26 +0000)]
Bug 35511: Add visual indicators of patron edit form collapsible sections
This patch updates CSS and markup in the patron add/edit form so that
there is better visual indication that sections can be collapsed by
clicking headings.
The JS function for showing and hiding sections has also been updated to
reduce verbosity.
Unrelated markup change for the sake of accessibility: A <label> has
been added to the "Show collapsed fields" checkbox which is seen when
CollapseFieldsPatronAddForm is active.
To test, apply the patch and go to Patrons -> New patron.
- Each section of the form should have an arrow indicator by the section
heading indicating whether it is expanded or collapsed.
- Mousing over the heading should show a border to help show the
clickable region.
- Clicking the header should collapse the section and the arrow
indicator should change to reflect that the section is collapsed.
- Go to Administration -> Sytem preferences and search for
CollapseFieldsPatronAddForm.
- Make some selections from the dropdown and save your changes.
- Return to the patron entry form and confirm that your selections are
collapsed by default.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Wed, 3 Jan 2024 16:01:56 +0000 (16:01 +0000)]
Bug 35689: Add id and classes to each MARC note in OPAC bibliographic details
Building on Bug 14156, this patch updates the OPAC bibliographic
detail page's display of MARC notes to add the tag number in both a
class (for consistent styling across the same tag number) and id (for
unique styling for each repeated tag).
To test:
- As a quick test for custom CSS, go to Administration -> System
preferences and locate the OPACUserCSS preference.
- Add this testing CSS:
- Locate a record with multiple notes fields. In the sample data, record
46, "Viridiana" is a good example which works well with the above CSS.
- On the bibliographic detail page for the record, click the
"Descriptions" tab.
- Each MARC note should be colored according to the tag it comes from.
- Inspect the HTML to confirm that each paragraph also has its own
unique ID.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 16 Jun 2023 16:07:35 +0000 (16:07 +0000)]
Bug 34082: Cut some redundancy in OPAC JavaScript string translations
This patch consolidates some JS code so that we're not defining a string
ine one place and using it once elsewhere. With JS-friendly translations
tools we don't need this workaround.
To test, apply the patch and go to Administration -> Circulation and
fine rules.
- Configure an item type rule with the "OPAC item level holds" setting
set to "Force."
- Log in to the OPAC and locate a record with that item type and
multiple items. An example in the sample data:
/cgi-bin/koha/opac-detail.pl?biblionumber=12
- Place a hold on the item.
- The holds screen should show a table of items.
- Open your browser's developer tools.
- In the Console tab, paste in this code and hit ENTER:
$(".checkitem").prop("checked", false);
- All radio buttons in the table of items should be cleared.
- Click the "Confirm hold" button. You should get an alert:
"Expecting a specific item selection."
- Log in to the OPAC and click the "Search history" tab from the user
summary page.
- Check one or more checkboxes next to search history items and click
the "Remove selected searches."
- You should get an alert: "Are you sure you want to delete selected
search history entries?"
- Log in to the OPAC, create a new list if necessary, and add some
titles to the list.
- Test that confirmation messages show correctly:
- Deleting a single title by clicking the "Remove
from this list" link.
- Deleting multiple titles by checking boxes and
clicking "Remove from list."
- Deleting a list.
- In Administration -> System preferences, enable TagsEnabled if
necessary.
- Log in to the OPAC and tag one or more items.
- From the Tag cloud page, check one or more boxes for your tags, and
click the "Delete selected tags" button at the bottom of the page.
- The confirmation message should display correctly.
- To test the change to opac-account.tt you have to install a payment
plugin, e.g.
https://gitlab.com/thekesolutions/plugins/koha-plugin-pay-via-paypal,
and attempt to submit a payment which is below the minimum payment
threshold set in the plugin's configuration.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emmi Takkinen [Mon, 6 Nov 2023 12:31:03 +0000 (14:31 +0200)]
Bug 34032: Use reserves.patron_expiration_date if set
If reserves.patron_expiration_date is set use it as holds
expiration date when waiting status is reverted.
To test:
1. Apply this patch.
2. Add hold for patron A and set expiration date manually.
3. Check in item on hold for patron A and confirm hold was
set as waiting.
4. Revert holds waiting status.
=> Hold should still have expiration date you set manually
in step 2.
5. Check that you have DefaultHoldExpirationdate and other
DefaultHold sysprefs set.
6. Add hold for patron B, but this time do not set expiration
date.
7. Check in item on hold for patron B, revert waiting status.
=> Hold should now have expiration date set based on
DefaultHold sysprefs.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emmi Takkinen [Wed, 21 Jun 2023 11:36:08 +0000 (14:36 +0300)]
Bug 34032: Set new expirationdate if waiting status is reverted
When one reverts holds waiting status holds expiration
date is not set even if DefaultHoldExpirationdate
syspref is enabled. This patch adds new param
hold_reverted to be used when RevertWaitingStatus is
used to determine if expiration date should be set again.
To test:
1) Make sure you have DefaultHoldExpirationdate syspref enabled.
2) Find hold with status "Waiting".
3) Revert waiting status.
=> Note that hold has no expiration date set.
4) Apply this patch.
5) Repeat steps 2 and 3.
=> Expiration date should now be set based on reserve
date.
Also prove t/db_dependent/Hold.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Mon, 5 Feb 2024 16:50:32 +0000 (16:50 +0000)]
Bug 35996: Make it clear that --category-code can not be used alone
This patch adds a clarification to writeoff_debts.pl to make it clear that --category-code can't be used as the only filter when running the script. If this is the case, the script just displays the help menu as it is expecting one of the other filters
Test plan:
1) Run perl misc/cronjobs/writeoff_debts.pl --category-code TEST --confirm
2) Observe that the help menu is displayed instead of running the script
3) Check the help menu for the text added in this patch
WNC amended patch - added same warning in the option section
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36565: EDI files API docs fixes (bug 30070 follow-up)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36565: Preservation module API docs fixes (bug 30708 follow-up)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36565: Biblio merge API docs fixes (bug 33036 follow-up)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36565: ILL requests API docs fixes (bug 22440 follow-up)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36565: Bookings API docs fixes (bug 29002 follow-up)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch introduces tests on the OpenAPI spec so that all tags used in
path definitions have their corresponding entry at the top level 'tags'
section.
This it important for correctly rendering the API documentation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Brendan Lawlor [Wed, 24 Jan 2024 17:15:09 +0000 (17:15 +0000)]
Bug 35856: added options to runtime parameter modal
This patch adds radio checkboxes to the reports runtime parameter modal for adding param options :all and :in.
The :in param option functionality depends on https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=35746
Test plan:
1. Apply patch
2. Create a report from SQL
3. Click Insert runtime parameter and choose any option other than date, list or text field
4. Note the form now includes a radio checkbox for parameter options
5. Choose 'Include option for all' and click Insert parameter
6. Note the parameter is inserted with :all option like <<label|authval:all>>
7. Choose 'Allow multiple selections' and click Insert parameter
8. Note the parameter is inserted with :in option like <<label|authval:in>>
9. Make sure that parameter options are not included on the form for date, list and text field
Thanks!
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 11 Jan 2024 16:21:48 +0000 (16:21 +0000)]
Bug 30324: Don't use default rule if we have a parent rule
Currenty, if we find only a defult rule for a checkout we are ignoring the parent rule.
We should not use the default if there is a parent rule
To test:
1: have an itype BK
2: create an itype BK2, set BK as the parent to BK2
3: create a circ rule for All Patrons, item type BK (displays as "Books (All)" in the circ rules interface), setting total checkouts to 1
4: do not create any rule specifically for the BK2 itype
5: have some BK items and some BK2 items
6: check a BK item out to a patron
7: check a BK2 item out to the same patron, observe you are not blocked from doing so
8: try to check out a second BK2 item to the same patron, get message "Too many checked out. 1 checked out, only 1 are allowed."
9: try to check out a second BK item to the same patrons, get message "Too many checked out. 2 checked out, only 1 are allowed."
10: return both items
11: check a BK2 item out to your patron
12: try to check a BK item out to your patron, get message "Too many checked out. 1 checked out, only 1 are allowed."
13: Apply patch
14: Repeat 7, you are now blocked
15: Other results should be the same
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Michael Adamyk <madamyk@ckls.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 11 Jan 2024 14:50:35 +0000 (14:50 +0000)]
Bug 30324: Unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Fri, 26 Apr 2024 17:29:30 +0000 (17:29 +0000)]
Bug 35249: (follow-up) Use Asset.css to fix QA script failure
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/admin/searchengine/elasticsearch/mappings.tt
FAIL forbidden patterns
forbidden pattern: intranet-tmpl should certainly replaced with [% interface %] (line 12)
forbidden pattern: Do *not* include full path to css files, use the Asset TT plugin (bug 20538) (line 12)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 11:26:51 +0000 (12:26 +0100)]
Bug 35249: Remove tableDnD from the about page
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 11:25:36 +0000 (12:25 +0100)]
Bug 35249: Adjust table id and style
We could eventually have a table for authorities, so better to have a
specific table id.
Also I think it's better to have the table smaller than taking the whole
width
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 30 Oct 2023 17:53:41 +0000 (17:53 +0000)]
Bug 35249: Use DataTables RowReorder extension instead of tableDND jQuery plugin
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Arnaud [Wed, 10 Apr 2024 12:03:14 +0000 (14:03 +0200)]
Bug 22613: Add GET endpoint /patrons/{patron_id}/checkouts
This patch adds a new endpoint, for fetching checkouts from a specific
patron.
Test plan:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/patrons_checkouts.t
=> SUCCESS: Tests pass!
3. Run:
$ curl -v -s -u koha:koha --request GET \
http://kohadev.local/api/v1/patrons/{id}/checkouts
test with query parameters (they are the same as for /patrons/{id}/holds
=> SUCCESS: The API works!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 26 Mar 2024 13:44:32 +0000 (13:44 +0000)]
Bug 33478: (follow-up) Correct file permission
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Thu, 29 Feb 2024 01:30:06 +0000 (01:30 +0000)]
Bug 33478: Consider TranslateNotices when saving notice styles
This patch ensures saving styles per notice still works as expected when the TranslateNotices system preference is enabled.
To test, enable the TranslateNotices system preference and attempt to save different CSS for each installed language for one notice. Confirm the correct CSS is saved for the correct language.
Confirm the CSS selector helpers are inserted into the textarea as expected.
Confirm the 'Apply format settings to all notices for this language' setting works, as in CSS is saved for all relevant language notices.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:26:42 +0000 (21:26 +0000)]
Bug 33478: Apply formatting to AR_SLIP
To test:
1. Enable ArticleRequests system preference in Koha Administration -> Global system preferences
2. Log into the OPAC
3. Do a catalogue search
4. Click the 'Request article' button for a record
5. Fill in some information and submit
6. Go to the staff interface
7. Go to Circulation -> Article Requests
8. Click the Actions menu next to your article request and choose Print slip
9. Confirm your format settings for AR_SLIP are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:37:02 +0000 (21:37 +0000)]
Bug 33478: Apply formatting to RECALL_REQUESTER_DET
To test:
1. Enable UseRecalls system preference and configure all relevant recalls circulation and fines rules
2. Search for a record with only one item
3. Check out this item to Patron A
4. Log into the OPAC as Patron B
5. Search for the item and place a recall
6. Go back to the staff interface
7. Check in the item
8. When the pop-up for the recall is triggered, confirm recall and print slip
9. Confirm your format settings for RECALL_REQUESTER_DET are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:35:58 +0000 (21:35 +0000)]
Bug 33478: Apply formatting to ACCOUNTS_SUMMARY
To test:
1. Go to a patron accounting page
2. Create a manual invoice and Save
3. Click the Print button in the patron toolbar
4. Click the 'Print account balance' button
5. Confirm your format settings for ACCOUNTS_SUMMARY are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:34:51 +0000 (21:34 +0000)]
Bug 33478: Apply formatting to RECEIPT
To test:
1. Enable EnablePointOfSale and UseCashRegisters system preferences in Koha Administration -> Global system preferences
2. Go to Koha Administration -> Cash registers and add a new cash register
3. Go to Koha Administration -> Debit types and add a new debit type. Make sure you check the 'can be sold' option
4. Go to Point of sale
5. Select Add for your item under Items for purchase
6. Fill in Collect payment box and click Confirm
7. When payment is received, click Print receipt
8. Confirm your format settings for RECEIPT are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:33:29 +0000 (21:33 +0000)]
Bug 33478: Apply formatting to ACCOUNT_CREDIT
To test:
1. Go to a patron accounting page
2. Create a manual invoice and Save
3. You'll be redirected to the Transactions tab
4. Click the Pay button next to your invoice and confirm Payment
5. Click the Print button next to your Payment
6. Confirm your format settings for ACCOUNT_CREDIT are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:32:13 +0000 (21:32 +0000)]
Bug 33478: Apply formatting to ACCOUNT_DEBIT
To test:
1. Go to a patron accounting page
2. Create a manual invoice and Save
3. You'll be redirected to the Transactions tab
4. Click the Print button next to your invoice
5. Confirm your format settings for ACCOUNT_DEBIT are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:28:36 +0000 (21:28 +0000)]
Bug 33478: Apply formatting to OVERDUES_SLIP
To test:
1. Check out an item to a user. Set the due date to a time in the past so it is overdue
2. Click Print in the members toolbar, then Print overdues
3. Confirm your format settings for OVERDUES_SLIP are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:27:54 +0000 (21:27 +0000)]
Bug 33478: Apply formatting to TRANSFERSLIP
To test:
1. Search for an item that was last seen at a library different from your logged in library i.e the holding library is Fairview but your logged in library is Centerville
2. Use the barcode to check in the item
3. When the popup to 'please return this item to <home library>' is triggered, click the Print slip button
4. Confirm your format settings for TRANSFERSLIP are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:24:53 +0000 (21:24 +0000)]
Bug 33478: Apply formatting to HOLD_SLIP
To test:
1. Place a hold on a record
2. Check in an item attached to the record
3. When the pop-up for the hold is triggered, confirm hold and print slip
4. Confirm your format settings for HOLD_SLIP are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Sun, 12 Nov 2023 21:15:20 +0000 (21:15 +0000)]
Bug 33478: Apply formatting to ISSUESLIP, ISSUEQSLIP, CHECKINSLIP
To test:
1. Check out an item to a patron
2. Click Print in the members toolbar, then Print quick slip
3. Confirm your format settings for ISSUEQSLIP are applied
4. Click Print in the members toolbar, then Print slip
5. Confirm your format settings for ISSUESLIP are applied
6. Return the item
7. When the item is checked in, click the 'Print checkin slip' button
8. Confirm your format settings for CHECKINSLIP are applied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Save format settings for an individual notice, or for all notices
This patch implements a single style field for a slip to allow for advanced CSS customisation of printed notices. There are links to insert selectors as helpers. Styles can be applied for an individual notice, or all notices.
To test:
1. Apply the patches, install database updates, update schema if needed, and restart services
2. Go to Tools -> Notices and slips
3. Edit any notice
4. Go to the Format tab
5. Confirm there is a textarea for CSS, and links to insert helpful selectors for IDs like #receipt and #slip
6. Add some CSS and confirm it saves.
7. Test that 'apply these settings to all notices' option works. Test the confirmation box appears when this is checked.
8. Add a new notice and confirm CSS settings save successfully
9. The subsequent patches have specific testing plans for each printable notice. For each, confirm that SlipCSS stylesheet changes are applied first. Specific notice styles should be applied last.
10. Test with a non-HTML notice as well, such as RECALL_REQUESTER_DET. Plain (non_HTML) notices have always come with <pre> tags around them so the text is formatted slightly differently but any CSS from SlipCSS or the notice Format should still hold.
Sponsored-by: Colorado Library Consortium Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31791: Display record source on the detail view
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a method for retrieving the related *Koha::RecordSource* from a *Koha::Biblio::Metadata* object.
The method is covered by tests:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Biblio/Metadata.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31791: Add x-record-source-id header to POST /biblios
This patch adds support for setting the record source on the API. It
does so by adding support for a new header `x-record-source-id`.
Setting the record source is restricted to patrons with the
`set_record_sources` permission.
A 403 error is returned on an attempt to set it without the correct
permissions.
The feature is documented on the spec.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/biblios.t
=> SUCCESS: Tests pass! Tests cover the right use cases!
3. Play with Postman (or similar)
4. Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31791: Add 'source_record_id' param to {Add,Mod}Biblio(Marc)
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31791: Add edit_locked_records and set_record_sources subpermissions
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: ByWater Solutions Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 10 Aug 2022 10:10:00 +0000 (12:10 +0200)]
Bug 31335: Remove unnecessary holds fetch from routing-preview
This $count variable is not used later, and I didn't find why it was
there in previous versions.
Test plan:
Use `git log -p serials/routing-preview.pl` and confirm we can remove
this block
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Brendan Lawlor [Tue, 20 Feb 2024 15:37:40 +0000 (15:37 +0000)]
Bug 35746: add multiselect to report dropdowns
Rebased for changes to guided_reports_start.tt
This patch adds the ability to use multi select in report dropdowns.
It uses syntax similar to using a list and when using the :all option
WHERE i.homebranch in <<Select libraries|brnaches:in>>
Test plan:
1. Create an SQL report with with new syntax for multi select
SELECT
i.homebranch,
count(*)
FROM items i
WHERE i.homebranch in <<Select libraries|branches:in>>
GROUP BY i.homebranch
2. Save the report
3. Note that you get the error
The authorized value category (branches:in) you selected does not exist.
4. Apply the patch and repeat steps 1 and 2
5. Note the report saves successfully
6. Run the report
7. Note the select dropdown is now a multiselect
8. Run the report with multiple selections
10. Click show SQL and note that multi select parameters get inserted into the query like:
WHERE i.homebranch in ('CPL', 'FFL', 'FPL')
11. Test other types of queries with multiple multi selects and lists etc
Sponsored-by: CLAMS Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Wed, 13 Mar 2024 11:09:39 +0000 (12:09 +0100)]
Bug 35826: Make copy of cost matrix when substituting inf
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Sun, 10 Mar 2024 18:50:13 +0000 (19:50 +0100)]
Bug 35826: Add unit tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Sun, 10 Mar 2024 18:49:40 +0000 (19:49 +0100)]
Bug 35826: Keep items on retry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Thu, 8 Feb 2024 20:13:42 +0000 (20:13 +0000)]
Bug 35826: Fix errors in transport cost optimization
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Andreas Jonsson [Sun, 21 Jan 2024 19:47:55 +0000 (19:47 +0000)]
Bug 35826: optimize on transport cost when building holds queue
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bonus: to ease testing I added `x-koha-embed: extended_attributes`
support.
To test:
1. Apply the unit tests
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: This is not implemented!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Exhaustive testes pass!
5. Sign off :-D
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36495: Use render_resource_deleted() helper everywhere
This patch makes the API controllers use the render_resource_deleted() helper.
No behavior changes are expected.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1
=> SUCCESS: Nothing broke
3. Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log