git.koha-community.org Git

Bug 18680: Add an empty entry by default to sort1/sort2 values in patron account

When using sort1/sort2 with authorised values to create a pull down
list, there will be no empty entry unless one is manually added to
the authorised values list.

This is not a good default behaviour, as it can easily
cause errors on patron creation. Without the empty entry, the first
alphabetic value is pre-selected and will be saved if not explicitly
changed. It also doesn't allow to mark sort1/sort2 as mandatory,
as the value is always 'set', the required message won't be triggered.

This adds an empty parameter to av-build-dropbox.inc to allow selectively
adding this empty entry without causing side-effects in other places
this include is used.

To test:
- Create authorised values for either Bsort1 or Bsort2 authorised
 value category
- Create a new patron:
 - you should see a pull down list on one and an input field for the other
 - for the pull down list, there will be no empty entry and the first
 alphabetic value will be preselected
- Make your sort1 and sort2 mandatory using BorrowerMandatoryField
- Verify there is still on empty entry
- Apply patch
- Repeat tests and verify that the behaviour is as expected
 - There should now be an empty entry
 - When the field is marked mandatory and empty is left, the required
 warning will be shown.

Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 10561: Rephrase DisplayOPACiconsXSLT and DisplayIconsXSLT slightly

As the pref removes the whole 'line' of information, this tries to makes
the behaviour a little clearer by adding a 'and descriptions' to the pref
text. It now reads:

[Show|Don't show] the format, audience, and material type icons and
descriptions in XSLT MARC21 results and detail pages in ...

To test:
- Check both preference descriptions in the staff client
- Verify the text reads correctly and this helps things

Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25016: Coce should not return a 1-pixel Amazon cover image

This patch adds an onload function to the JavaScript which loads images
from Coce. In the case where the image is 1 x 1 pixel the image should
be removed.

To test you should have Coce enabled and Amazon.com included in the list
of sources.

- Apply the patch and view the bibliographic details page under a
 variety of conditions:
 - A title which has a matching Amazon image:
 - The image should load as expected.
 - A title which doesn't have a matching Amazon image
 - The image should not be found in the source at all after the page
 has loaded.
 - Test with local cover images enabled

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25176: Compiled CSS

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25176: Fix style of checkout form

This patch makes a small CSS change in order to fix a display problem
with the checkout form where the form's width doesn't match that of the
"last checked out" message.

To test, apply the patch and regenerate the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).

Check an item out to a patron. Confirm that the green-bordered "Checked
out" message under the checkout form matches the width of the form.

Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24800: Add tests

Signed-off-by: Clemens Elmlinger <clemens.elmlinger@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24800: Handle inexistent return date on self checking

See bug 24800 comment 0 for a description of the problem.

We do not want the SIP server to crash if it receives a checkin request
with a return date that is not given.

The option this patch chose is to parse it only if provided.

Signed-off-by: Clemens Elmlinger <clemens.elmlinger@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25069: Fix AddressFormat="fr" behavior

Something went wrong during a rebase of bug 13618
 commit dcd1f5d48c758aee17b6c6f069c6146b42efe117
 Bug 13618: Add html filters to all the variables

Several changes related to AddressFormat are wrong:

- [% IF Koha.Preference( 'AddressFormat' ) %]
- [% INCLUDE "member-main-address-style-${ Koha.Preference( 'AddressFormat' ) }.inc" %]
- [% ELSE %]
- [% INCLUDE 'member-main-address-style-us.inc' %]
- [% END %]
+ [% SWITCH Koha.Preference( 'AddressFormat' ) %]
+ [% CASE 'de' %]
+ [% INCLUDE 'member-main-address-style-de.inc' %]
+ [% CASE # us %]
+ [% INCLUDE 'member-main-address-style-us.inc' %]
+ [% END %]

Test plan:
Create a patron with all the address fields filled
Play with the 3 option values of AddressFormat, and confirm that the address is displayed correctly
on the patron's view, and in the patron module (top left)

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24840: [19.11.x] Replace DateTime->now with dt_from_string

We should use Koha::DateUtils instead of Date::Time directly

This patch simplay replaces calls to now() with a call to dt_from_string()
which does effectively the same thing.

Probably reading the code and verifying changes is sufficient but...

To test:
1 - confirm the files all compile
2 - confirm all tests pass
3 - confirm Koha still works

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24840: Catch some further cases of DateTime->now

This patch corrects a few additional cases where DateTime->now is called
directly instead of via Koha::DateUtils.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24620: [19.11.x] Close existing transfer when hold set to waiting (squashed)

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24620: Close existing transfers when setting item to waiting

This patch adds a clause in ModReserveAffect to check if there
are existing transfers and close them when setting a hold to waiting

To test:
1 - Set AutomaticItemReturn to Do
2 - Checkin an item from Library B at Library A
3 - Confirm item is in transfer (check the details page)
4 - Place a item level hold for pickup at library A
5 - Checkin the item at Library A
6 - Confirm the hold
7 - View the details page
8 - Note the item is in transit and waiting
9 - Apply patch
10 - Delete hold and repeat
11 - Confirm that transfer is closed when hold marked waiting

Signed-off-by: Sally <sally.healey@cheshirewestandchester.gov.uk>
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 24620: Fix test, remove replaced code, use dt_from_string

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 20101: Cronjob automatic_item_modification_by_age.pl does not log run in action logs

C4::Log::cronlogaction() was never implemented in automatic_item_modification_by_age.pl.

Test Plan:
1) Apply this patch
2) Enable CronjobLog
3) Run automatic_item_modification_by_age.pl succesfully
4) Note the run is noted in the action logs

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25086: DBRev 19.11.05.003

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25086: Set changed_fields column as nullable

This patch changed_fields column as nullable.

To test:
1. Do not apply any patch
2. Set PatronSelfRegistrationVerifyByEmail preference to require
3. Fill self registration form in opac and submit
CHECK => OPAC dies with a nasty message, that says Field 'changed_fields' doesn't have a default value
4. Apply this patch and updatedatabase
5. Repeat step 3
SUCCESS => Registry process continues as expected
6. Sign off

Sponsored-by: Orex Digital
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25007: (follow-up) Fix the way image check alters layout

A question in the bug report asks: Why is is necessary to change the
Bootstrap class to col-xs-12? The JavaScript which checks for the
existence of an Amazon cover image is designed to remove the Amazon
cover's container if there is none. Changing the class of
cover image column is gone.

However, the check is incorrect because it doesn't account for Local
Covers. There might be both a 1 x 1 pixel Amazon image and a local cover
image, so the layout shouldn't be changed unless there are no images
present.

To test, apply the patch and view the bibliographic details page of
various titles including:
- Amazon cover present, no local cover
- No Amazon cover, local cover image present
- Both Amazon and local cover image

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25007: Check for normaalized ISBN when building Amazon link

TO RECREATE:
-Have Amazon images turned on and local images too.
-Have a record with a local cover image
-Make sure the record has no ISBN in 020 field.
-Load detail page of that record and see that the local cover images is
not on the right hand side like it should be but forced underneath
'catalogue_detail_biblio' in an odd spot.
-Apply patch and reload page
-The image should be back in its normal spot

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 22468: Standardize on labelling ccode table columns as Collections

We now display the descriptions everywhere, so we should drop the
'code' from labels.

This changes text in a lot of playes in Koha, including:

- The relatives checkouts table when displayed for the guarantor
- The new order and order receive forms in acquisitoins (item creation)
- The description of CCODE in the authorised values table
- The column description on results in item search
- The branch tranfers page
- Course reserves: add reserve items (one and in batch)
- Patron account > statistics tab

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25120: Make accounting the default tab when opening the pref editor

The default/active tab when opening the sys pref editor used
to be 'Acquisitions' as the first tab, but should now be the new
first 'Accounting'

To test:
- Go to Administration > System preferences
- Verify the Aquisition tab is second and preselected
- Apply patch
- Repeat
- Verify now Accounting is selected

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 21865: allow test arg alone

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 21865: add confirm to remove_unused_authorities.pl script

Like in most scripts in misc, add confirm argument
to ensure script is not run without knowing what it does.

Test plan:
1) Run misc/migration_tools/remove_unused_authorities.pl -h
2) You see help line for confirm
3) Run misc/migration_tools/remove_unused_authorities.pl
4) You see help and script does nothing
5) Run misc/migration_tools/remove_unused_authorities.pl -c
6) Script runs like wanted

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 21865: ES compatiblity of remove_unused_authorities.pl

The script misc/migration_tools/remove_unused_authorities.pl directly checks if Zebra search is OK.

This patch changes so that this test is only if Zebra is the search engine.
It also adds a test on the search off any authority number indexed (index 'an').
With Zebra its : an,alwaysmatches=''
With ES its : an:*
This test ensure that biblios records are indexed and that not all autorities will be deleted.

Test plan:
1) On a catalog create a new authority
2) Use Zebra in systempreference SearchEngine
3) Stop Zebra server
4) Run misc/migration_tools/remove_unused_authorities.pl -c
5) The script does nothing and says :
 Zebra server seems not to be available. This script needs Zebra runs.
6) Restart Zebra server
7) Delete biblio index base
8) Run misc/migration_tools/remove_unused_authorities.pl -c
9) The script does nothing and says :
 Searching authority number in biblio records seems not to be available : an,alwaysmatches=''
10) Use ElasticSearch in systempreference SearchEngine
11) Delete biblio index base
12) Run misc/migration_tools/remove_unused_authorities.pl -c
13) The script does nothing and says :
 Searching authority number in biblio records seems not to be available : an:*

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 21865: improve remove_unused_authorities.pl script

remove_unused_authorities.pl script can be improved.

This patch changes changes verbosity so than test mode can be used
to know the autorities that are used and those that can be deleted.
It also writes a line in output if limited authority type(s).

This patch also removes the unused vars $thresholdmin and $thresholdmax.

It also changes the query to use SQL with parameters for authority types.

Test plan :
1) On a catalog create a new authority
2) Be sure catalog is well indexed
3) Run misc/migration_tools/remove_unused_authorities.pl -t
4) You will see the line :
 *** Testing only, authorities will not be deleted. ***
5) You will see lines of :
 authid=x type=y : used X time(s)
6) You will see the line for the authority created in 1) :
 authid=x type=y : can be deleted
7) You will see at the end :
 x authorities parsed
 y can be deleted because unused
 z unchanged because used
8) Run misc/migration_tools/remove_unused_authorities.pl
9) You don't see the line :
 *** Testing only, authorities will not be deleted. ***
10) You will see lines of :
 authid=x type=y : used X time(s)
11) You will see the line for the authority created in 1) :
 authid=x type=y : deleted
12) You will see at the end :
 x authorities parsed
 y deleted because unused
 z unchanged because used
13) Run misc/migration_tools/remove_unused_authorities.pl --auth NP --auth CO
14) You see the line :
 Restricted to authority type(s) : NP,CO.

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25053: Clarify the description of syspref PatronSelfRegistrationExpireTemporaryAccountsDelay

This patch changes the wording of this system preference.

To test:

1) Check the current wording of this system preference.
2) Install the patch.
3) Check that the wording of this system preference has changed to "Delete patrons still in the category indicated by PatronSelfRegistrationDefaultCategory X days after account creation."

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24547: Add more action logs for holds

It seems like ModReserveFill and ModReserveAffect should both produce action logs for holds.

Test Plan:
1) Apply this patch
2) Place a hold
3) Check in the item to trap the hold
4) Check out the item to fill the hold
5) Check the action logs for that reserve id
6) Note the new logs!

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25027: Use localStorage instead of sessionStorage for results browser

Staff side, when a search a done and a result clicked, a browser appears
on the left, to navigate between the different results.

We use sessionStorage to know the list of biblionumber from the result.

As sessionStorage is only for the current tab, we do some ugly things,
to catch the click events, then open the new tab, attach it to the
current window, and put the focus back on the result list.

We really should not do that, and let the user decide what they want to
do with their clicks!

To do so, let use the correct storage, localStorage, and have the
results shared between the windows.

We may need to clear that at some point, isn't it?

Test plan:
Launch a search, click result (left or middle), confirm you see the
browser and that the window/tab opened like any other websites
(depending on your web browser settings).

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 20370: Misleading comment for bcrypt - #encrypt it; Instead it should be #hash it

This patch changes the wording of the comment

To test:

1) Check the wording of Line 67 of Koha/AuthUtils.pm
2) Apply the patch
3) Check that the wording has changed from "Encrypt it" to "Hash it"

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24993: fix increment

Aparently ((i++)) isn't portable, changed for an admittedly uglier
but functional increment.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24993: Make sure we are not going to loop indefinitely

Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24993: Make sure SIP server is stopped before restarting it

Sometimes doing koha-sip --restart instance happens too fast and
the SIP server is not started.

To test:
- have SIP enabled and running for your instance
- issue a restart, make sure it restarts
sudo koha-sip --restart inst

Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25008: Overload Koha::RecordProcessor->options to update filters

This patch overloads the 'options' accessor generated by Class:Accessor.
It does so the passed options are used to refresh the loaded filters.

Tests are added for this overloaded method as well.

To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/RecordProcessor.t
=> SUCCESS: Tests pass!
3. Sign off :-D

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25008: Tests for ->options

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25008: Regression tests

This patch highlights a behaviour of Koha::RecordProcessor that is
unexpected: if you change the original options using ->options, the
loaded filters don't pick the change. That's because the filter objects
are loaded on ->new, and they are never updated.

To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/RecordProcessor.t
=> FAIL: Test prove ->options doesn't update the filters!

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24764: TinyMCE shouldnt do automatic code cleanup when editing HTML in News Feature

TEST PLAN:
1. Make a new news item and use the TinyMCE editor, click on the <> icon to go to the Source code editor
2. Add some HTML like TEST and save it.
3. Go back in and notice that TinyMCE has changed it to: TEST
4. It should not auto clean up and also it should not autowrap with tag.
5. Apply patch patch, and repeat step 2. Save again.
6. It should not have automatiicly changed any HTML or added any wrapper.

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24903: Add tests for _handle_seqno

Trivial tests.

Test plan:
Run t/Serials/ModSerialStatus.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24903: Special characters like parentheses in numbering pattern cause duplication in recievedlist

Test plan:
Use serial with a numbering pattern with parentheses like "2018 (No. 1)".
Mark serial issue as arrived, check receivedlist on summary.
Edit issue again, check if not duplicated on receivedlist.
Mark issue as missing or not available, check missinglist.
Mark missing issue as not missing, check list again.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25038: Fix tabs on the OPAC reading history view

OPAC reading history table has three tabs for different checkout types: All, Checkouts, On-site checkouts.

However, all of your checkouts are visible every tab regardless of checkout type.

Test plan:
1. Enable OnSiteCheckouts system preference
2. Perform two checkouts: one normal checkout, one on-site checkout
3. Go to OPAC /cgi-bin/koha/opac-readingrecord.pl
4. Observe your checkouts all are visible in first tab
5. Select second tab and notice that the table is now filtered
6. Same with third tab

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24966: Add unit tests

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24966: (QA follow-up) Fix return value of hold_patron_bcode

It is used in list context, but we need a scalar value.
Can be fixed by adding scalar's, or returning empty string as here.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25040: monkeypatch Schema::Loader for recent MariaDB

Recent versions of MariaDB changed the output of 'DESCRIBE' for
timestamp columns with defaults from `CURRENT_TIMESTAMP` to
`current_timestamp()`. As such the code inside
DBIx::Class::Schema::Loader which catches such cases and outputs
`\"current_timestamp"` as a sensible cross platform default is missed
and this leads of inconsistent class files and bugs with out default
lookup code in Koha::Objects.

This patch serves as a backport of the code I have submitted upstream
such that out developers can continue to use update_dbix_class_files.pl
to build their schema classes from the database and regardless of their
db server version get a consistently correct output.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25050: Adjust marc_records_to_documents to search entire mapping array

There was an assumption in the ES code that match-heading mappings will appear in
a specified portion of the mappings array.

Certain mappings setups will not meet this assumption.
We need to move our searching up one level

The key seems to be having a mapping for a complete field, say 150, in both the
match-heading and another field as well as having mappings for ungrouped fields like
150a 150ab etc.

The unit test coverage should be sufficient for testing

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25050: Unit tests

This patch simplay alters the data we use for the tests, doing so causes them to fail

To test:
1 - Apply only this patch
2 - prove -v t/Koha/SearchEngine/Elasticsearch.t
3 - It fails!
4 - Apply next patch
5 - It passes!

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24266: (alternate patch) Only use defined borrowernumbers in reconcile_balances.pl cron

I believe the error is triggered when borrowernumbers are left empty in
the accountlines table. Not sure why this would happen, but it appears
to be what causes the problem.

Do not apply the first patch if testing this patch.

To test:
1) sudo koha-mysql INSTANCENAME
2) Create a test borrower, add any payment etc to create an accountline,
then delete this borrower
3) ensure the AccountAutoReconcile syspref is disabled
4) Go to another borrower's accounting tab
5) Create a manual credit or debit. Confirm this shows in the 'Make a
payment' tab as an amount that COULD be applied, but isn't automatically
applied
6) in your terminal, run the reconcile_balances.pl script
7) Confirm the error does not show in the logs and the balance for
the borrower is correctly reconciled.

Sponsored-by: Horowhenua District Council
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25095: Remove warn left in FeePayment.pm

It appears that a debugging statement was accidentally left in FeePayment.pm by bug 5605.

Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 22778: Add unit test

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 22778: Suggestions with no "suggester" can cause errors

If one tries to modify a suggestion that has no suggester you will get the following error:

Can't call method "lang" on an undefined value at /usr/share/koha/lib/C4/Suggestions.pm line 506

Koha assumes that every suggestion has a borrowernumber in suggestedby

Test Plan:
1) Create a suggestion with an unpopulated suggestedby
2) Attempt to modify that suggestion
3) Note the error
4) Apply this patch
5) Restart all teh things
6) Attempt to modify that suggestion
7) No error!

Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 23514: Split Call Numbers for all layout types

This patch ensures call numbers are properly split for layout types
other than 'BAR'.

Test plan:

1. Go to Label Creator and choose/create a Label Layout with "Choose
layout type: Biblio"
2. make sure you have at least "itemcallnumber" in Bibliographic data to
print/Data fields
3. check "Split call numbers" box and save the layout (ie testlayout)
4. create a label batch, using items that have a call number (ie
DC611.B848 H84 1997). LCC is used here, but you may try with Dewey as
well.
5. export selected batch using any template and the layout you created
in previous step to a PDF
6. Call numbers are splitted (as expected) in the resulting PDF file
7. edit the layout you created in the previous step (ie testlayout) and
change the "Choose layout type:" to either Biblio/Barcode (BIBBAR) or
Barcode/Biblio (BARBIB)
8. export the same batch using the same template and layout as before
9. Call numbers are NOT splitted at all

After patch is applied, call numbers splitting functions are applied
even in Biblio/Barcode (BIBBAR) or Barcode/Biblio (BARBIB) layout types.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 25081: Fix wrong comment

Not directly related to previous patch, coming from 23435.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 25081: Fix creation of new item for a received issue

The Bug 23435 introduced the idea of multiple copies added while
receiving a new issue. Unfortunately, under some circumstances, it
causes no items being added at all. It occurs stochastically, only
under some conditions. But it is quite likely to happen while receiving
a supplemental issue.

The reason fot hist is that, in serials-edit.pl, line ca 292 and infra,
@num_copies is treated in the same way as @tags, while it should be
treated similarly to @bibnums. It will be obvious after examining the
content of parameters tag, subfield, field_value, ..., number_of_copies.
In other words, for every edited issue number_of_copies is a scalar.

Nota bene:
a) beter to initialize $countdistinct with zero;
b) note that in master, now, before applying the patch,
$itemhash{$item}->{'num_copies'} is treated once as a scalar
and in the next line--as an array:

$itemhash{$item}->{'num_copies'} //= 1;

for (my $copy = 0; $copy < $itemhash{$item}->{'num_copies'}[$index];){

TEST PLAN
=========
1. Have a subscription with the option "Create an item
record when receiving this serial" active and try to receive a
supplemental issue. Control that a new item under the biblio record
(usually) will not be created.
2. Apply the patch.
3. Repeat p. 1 -- a new item should be created.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 22937: Add hint to groups editor

Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>

Bug 25046: Add test

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25046: Include borrowers.othernames in SELECT statement

In C4/Utils/DataTables/Members.pm, the SELECT statement that fetches
patron data from the database does not include borrowers.othernames
in the field list. As a consequence, when the output is in the form
of a DataTable, the Template Toolkit files that refer to .othernames
(such as the patron-title.inc include) won't display the information
from the 'Other name' input field if that field has been filled in.

This patch fixes that.

Test plan:
0) Have a few patrons with some data in the 'Other name' field.
1) Perform a generic search in Home > Patrons to ensure you will get
 a DataTable with results.
2) Observe that the 'Name' column does not include 'Other name' info.
3) Apply the patch, and restart Plack if necessary.
4) Repeat your search: this time you should see the information from
 the 'Other name' field, it will be next to the patron's First name
 and within parentheses.

Sponsored-by: Eugenides Foundation Library
Signed-off-by: Devinim <nazli@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24826: Remove warnings from Sendmail

Use of uninitialized value $mail{"Cc"} in substitution (s///) at /usr/share/perl5/Mail/Sendmail.pm

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24940: Serials statistics wizard: order vendor list alphabetically

This patch changes the dropdown from being sorted by aqbookseller.id to
aqbookseller.name

To test:
1) Add at least 2 vendors:
- First: ZZZZ
- Second: AAAA
2) Add subscriptions for each of the vendors
3) Check the pull down in the serials statistics wizard and verify it
lists them as ZZZZ, AAAA
4) Apply the patch
5) Re-check the pull down in the wizard and check that the vendors are
now listed AAAA,ZZZZ

Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25019: Make the ViewPolicy filter initialization standard

This patch makes the ViewPolicy filter use the 'params' accessor instead
of relying of ->{options} which has no accessor. This will allow
interacting with the filter object be similar through all the filters in
the chain.

To test, we just need to verify no behaviour change takes place:
1. Run:
$ kshell
k$ prove t/db_dependent/Filter_MARC_ViewPolicy.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 20754: DBRev 19.11.05.002

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 20754: DB revision to remove double accepted shares

[Originally submitted for bug 11943, parked at 20754.]
[Attempt to revive it now.]

Although it is no problem to have them, we could do a cleanup.
This patch just removes duplicate rows from the table.

Note: I considered adding a unique index like:
ALTER TABLE virtualshelfshares ADD UNIQUE INDEX (shelfnumber, borrowernumber, invitekey);
But the possible NULL values in borrowernumber and/or invitekey require
additional code changes. So I left it alone.

Test plan:
[1] Create two records with same borrowernumber and shelfnumber in the shares
table, if not present already.
[2] Run updatedatabase.pl

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24604: Add 'Pay' button under Transactions tab in patron accounting

It does the same thing as the 'Pay' button under 'Make a payment' tab.
It is nothing more than a shortcut.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 18227: (QA follow-up) Add fix to koha-common.postinst

Now koha-common.postinst has a way to patch log4perl configs on
instances, we should patch the Z3950 responder config accordingly,
before it is backported to 19.11 or the 20.05 release :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 18227: Handle utf8 in Koha::Logger

No more wide characters in print when logging to a file with Koha::Logger.

Test with this string

"♯Turpo :"

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25010: DBRev 19.11.05.001

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25010: Fix typo 'rewewal' in debit types

This fixes a typo in the debit type description of
RENT_DAILY_RENEW

1) Go to Administration > Debit types
2) Show all debit types
3) Check for the typo
4) Apply patch
5) Verify that the typo is gone
6) Check account_debit_types table for type:
SELECT * FROM account_debit_types;
7) Run database update
8) Repeat and verify typo is gone

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25024: Do not escape $

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25024: Make grep match full string

To test:
1 - Create or have a branch with code CPL
2 - Create two new branches 'ACPL' and 'CPLA'
3 - In branch transfer limits disallow some itype or collection from another branch (FPL) to ACPL and CPLA
4 - Set UseBranchTransferLimits to 'Enforce'
5 - Find a biblio with one item belonging to FPL
6 - On opac, attempt to place a hold
7 - Note that ACPL and CPLA don't show in dropdown, OK
8 - Note that CPL is disabled, NOT OK
9 - Apply patch
10 - Place hold
11 - CPL is now enabled

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 23601: Prevent default for auxclick

The issue appears to be that the default action is not prevented for middle click because it registers
an 'auxclick' event as opposed to a 'click' event

To test:
1 - Perform a search in staff client
2 - Shift-click and hold on a result
3 - Note a new tab opens
4 - Release the click, no change
5 - Middle click and hold on a result
6 - New tab opens
7 - Release, a second new tab opens
8 - Apply patch
9 - Reload page
10 - Middle click and hold
11 - New tab opens
12 - Release
13 - No new tab

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24964: [19.11.x] Do not fetch all patrons for owner/users of funds

admin/add_user_search.pl sets 'patrons_with_acq_perm_only', to only
retrieve patrons with acq (order_manage) permissions.

The original bug was hidden in the existing code, but the behavior was
terrible.
To prevent patrons matching the permissions contrainst to be hidden, we
fetched ALL the patrons from the DB, then filtered them depending on
their permissions. This might have awful performance on DB with lot of
patrons.

So basically with this patch we are adding the pagination back to the
"owner/users for funds" feature, as the permission filtering is now done
at DB level.

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24964: [19.11.x] Fix perl critic warning

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24964: [19.11.x] Prevent random failures sorting by borrowernumber

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24964: [19.11.x] Do not filter patrons after they have been fetched

The svc/members/search script is called in different places.
In some places (Set owner for a fund, add users to a fund, or set a
manager to a suggestion), we need patrons to be filtered depending on
the permissions they have.
For instance you can only set a fund's owner with a patron that has
acquisition.order_manage.

Currently we have fetching X (default 20) patrons, then filter them
depending on their permission.
Says you have 3 patrons that have the correct permissions but are not in
the 20 first patrons, if you do not define a search term, the search
result will be empty.

This is not ideal and we should filter when requesting the DB.

Test plan:
- Have more than 20 patrons, remove them their permissions
- Create 3 more:
1 superlibrarian
1 with the full acq permission
1 with acquisition.order_manage
- Create a fund and set a owner
- Search for patrons, without specifying a search term (to get them all)
=> Without this patch the new patrons you created are not displayed
=> With this patch they are!

Same test plan apply to set a manager to a suggestion (freshly pushed,
see bug 23590), with suggestions and suggestions.suggestions_manage

Note: The code has been written that way to rely on
C4::Auth::haspermission, but the SQL query is quite trivial and the gain
is important.

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24964: [19.11.x] Add tests

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24183: Add before_send_messages hook

This patch adds a simple hook to the process_message_queue cronjob
to allow plugins to pre-process messages in the messaging queue before
they are sent.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 19014: [19.11.x] Prevent auto_renew notices form sending if too early to renew

Bug 19014: Unit tests

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 19014: Return auto_too_soon before on_reserve

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 19014: on_reserve blocks auto_renew

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25022: Display problem in authority editor with repeatable field

This patch corrects an error in the structure of the authority editor
template so that repeating subfields do not generate invalid markup. The
correction was found by comparing with addbiblio.tt.

If you are viewing the diff, please note that some minor whitespace
changes have been made.

To reproduce, clone and and populate any repeatable subfield, save, and
open the authority for editing again. The clones subfield will be
formatting incorrectly, showing bullet points on each line.

To test, apply the patch and reload the authority editor showing the
record with the cloned subfield. It should display correctly.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 17938: Fix display of label for repeated MARC 583 - Action note fields

When there are mulitple 583 on a record, the label "Action note" will be
repeated for each. This fixes it, so that the label only appears once and
multiple fields are separated by | following the existing pattern.

Also makes sure there is a space between $z and other subfields.

Note:
Ind. 1 = private - These won't display in the OPAC
Ind. 1 = 0 or empty - These will display in the OPAC
Staff will display all 583 independent from indicator.

To test:
- Add one or more records with none, one and muliple 583, at least one including $z
For examples see:
http://www.loc.gov/marc/bibliographic/bd583.html
- Verify display problems
- Apply patch
- Verify display is improved - one label and $z is followed by a space

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24941: Serials - Fix link to basket from acquisition details information

Adding orders from subscriptions makes acquisition information visible
in the serials module. In the table of acquisition data is a link back
to the basket - but this link is missing the basket number parameter -
it doesn't work. This patch fixes the TT variable to make it work.

To test:
- Add a subscription
- Add a new basket
- Add a order line using "Add from subscription"
- Go to the subscription details page, check the acquisitions tab
- Try the link to the basket - it should not work
- Apply patch
- Try the link again - now it should bring up the basket page with
the order.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25012: Fix class on OPAC view link in staff detail page

Probably a copy & paste error: the OPAC view link on the staff
detail page currently has the class succeeding_entry_note.

This patch changes it to opac_view to allow for independent
styling of the link.

Note: The link will only be visible when OPACBaseURL is set.

To test:
- Use the element inspector or check the source code for
the class used on the OPAC view link on the staff detail page
- Apply patch
- Repeat and verify that the class has changed to opac_view

Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25013: Fix capitalization: Edit Items on batch item edit

Fixes a tiny string issue: Edit Items --> Edit items

To test:
- Go to tools / batch item edit
- Enter a barcode
- Check the heading above the edit item form
- Apply patch
- Verify the heading is now properly capitalized

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25014: Fix capitalization for "Call Number" in staff and OPAC sort options

There are some ocurrences of "Call Number" in the sort option lists in
staff and OPAC. The patch changes them to "Call number".

To test:
- Check the sort option list in staff and OPAC for the typo
- Apply patch
- Verify it's now all corrected

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25006: Make Koha::Item->as_marc_field skip undefined subfields

This patch makes as_marc_field skip subfields that don't have a value or
contains an empty string (replicating C4::Items:1021 logic).

To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Item.t
=> FAIL: Tests fail because the generated MARC::Field contains undef
subfields.
3. Apply this patch
4. Repeat 2.
=> SUCCESS: Tests pass! Undefined and empty subfields are skipped!
5. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25006: Regression tests

This patch introduces regression tests for as_marc_field. It makes sure
there are empty subfields and then uses List::MoreUtils' all to verify
all generated MARC subfields contain something (i.e. the undef ones are
skipped).

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 19475: Clear the caches at the end of the tests

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 19475: Don't copy holiday if it already exists in target calendar

Calendars copy tool created duplicate values to database.
Holidays in target calendar weren't checked before
inserting new holidays. This patch fixes this.

To test:
1. Add holidays for branch A
2. Copy branch A calendar to branch B
3. Repeat copy to branch B
=> Check database, branch B has now duplicate holidays
4. Delete holidays from branches A and B
5. Apply patch
6. Repeat steps 1-3
=> Check database, no duplicates

Sponsored-by: Koha-Suomi Oy
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 19475: Add unit tests

To test prove:
t/db_dependent/Holidays.t

Sponsored-by: Koha-Suomi Oy
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 9422: (RM follow-up) Rebase Correction

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 9422: Don't allow access to 'Upload patron images' when patronimages syspref is off

In addition to checking the patron image upload permission, this
adds a check for the patronimages system preference to the tools
home page and sidebar.

To test:
- Check that the patron image upload tool only displays when
 - system preference patronimages is set to 'Allow'
 and user is either
 - superlibrarian or
 - has bath_upload_patron_images permission
- Save URL of patron image uploader page
- Turn off patronimages
- Verify you get redirected to the home page of Koha when trying
 to access the page

Note: this redirect is already used by the stock rotation feature.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Update release notes for 19.11.05 release

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Increment version for 19.11.05 release

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: Compiled CSS

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: Adjust tests

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: (follow-up) separate positive and negative statuses as in the past

This patch preserves someting closer to previous functionality.

Negative not for loan are in the 'unavailable' section in red, positive ones are in the 'reference' section in green. Itemtype level will also be in green in reference

Item specific status will override an itemtype level.

The line break between 'reference' and 'unavailable' existed before and is preserved - negative not for loan and checked out items appear here

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: (follow-up) Fix display of undefined statuses and add a class

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: (follow-up) Add missing space

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: Change negative notforloan as well

This makes the changes apply to both positive and negative notforloan values

The extra line generated before is removed

Some spans are added and cleaned up and labels moved to CSS to allow for easier altering where needed

Itemtypes marked notforloan remain as reference, the label can be changed via css

To test:
1 - Have a record with items in various statuses, ideally
 - 3 available, with 2 in one branch, 1 in another
 - 3 with itemtype not for loan, 2 in one branch, 1 in another
 - 3 in a positive not for loan status, 2 and 1 as above
 - 3 in a negative not for loan status, 2 and 1 as above
 - 1 in a different positive loan status, but with the same opac description as the negative above
2 - Search the opac to include this record, take a screenshot
3 - Apply patch
4 - Restart all and refresh
5 - Compare to screen shot
6 - Differences include:
 - Positive statuses are now on separate line with opac description showing
 - Unavailable (not for loan items) now include callnumber and branch in display
 - Positive and negative notforloan with same description are combined where branches match
 - Inspect the elements, note new spans around 'Items available for
loan/reference'
7 - Add to OPACUserCSS:
 .ItemSummary .ItemBranch{
 display:none;
 }
 .unavailable .ItemSummary .CallNumber,.unavailable .ItemSummary .LabelCallNumber{
 display:none;
 }
8 - Note the branches are hidden, and callnumbe rhidden for unavailable
items

Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 7611: Show the NOT_LOAN authorised values for item status in XSLT OPAC search results

Added : Call number for all not for loan status

XSLT Results template improvement : Use the NOT_LOAN authorised values

Improvement : Use the NOT_LOAN authorised values when showing items status in the OPAC search results.
Before this patch, these items were only considered as "unavailable".

Note : This patch only affects the OPAC XSLT search results template for MARC21 records. This patch was not tested on UNIMARC or NORMARC records. I won't be able to support these formats, so I'm hoping someone could do the same for these other record formats.

Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25142: Fix wrong grep logical test

To test and understand what's going on, you can try that bit of code:
my @a = qw( a b c a);
my @b = qw( b c d );
my @c;
@c = grep { 'a' eq $_ } @a ? 'ok' : ();
say @c;
@c = ( grep { 'a' eq $_ } @a ) ? 'ok' : ();
say @c;
@c = grep { 'a' eq $_ } @a ? ('ok') : (undef);
say @c;

The problem here:
Have patrons in 3 branches CPL, MPL, SPL
Have a non superlibrarian with edit_borrowers permission but
without view_borrower_infos_from_any_libraries, from CPL
Create a library group with CPL, MPL
Use that non superlibrarian to search for patrons
You can search for patrons fro CPL and MPL
BUT, edit the value for CPL, use SPL (edit the DOM)
Search and... oops

Apply this patch, try again

Also use a superlibrarian patron (and/or with view_borrower_infos_from_any_libraries)
and confirm that they can see all patrons

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with edit_borrowers permission but NOT view_borrower_infos_from_any_libraries
Editing the DOM I can search (not edit) from any branch
With patch no entries found :)

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Amended test plan slightly (+ without)

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 16922: Add RewriteRule to apache-shared-intranet for dev package installs

As a simple alternative to the solution in bug 9949 or just as an
additional measure, this patch adds a rewrite rule for intranet
in order to intercept potential misuse of perl scripts that could be
reached on a dev package install via the cgi-bin/koha scriptalias.

It simply rewrites them to the nonexistent "notfound", resulting in a
regular 404 error.

The rewrite rule does not harm regular installs and is just a little extra
step in securing a dev install. You should have more security measures in
place to secure your staff client.

QA Note: Although a rewrite rule may not be our first choice, this one
rule is more elegant and easier to maintain than e.g. a whole bunch of
aliases.

Note: This patch should have a regular and a dev install signoff.

Test plan:
[1] Make sure that this rewrite rule is inserted in your actual apache
 config via /etc/koha/apache-shared-intranet.conf. Restart Apache.
[2] For regular package installs:
 Try one of the URLs in step 3.
 Verify that your staff client still operates as usual. Test a few
 URLs inside some modules.
[3] For dev installs:
 Try some URLs like below.
 Expect 404 errors only, not 500s. If you do not see a 404, go back!
 /misc/stage_file.pl
 /t/db_dependent/default_search_class.pl
 /installer/data/mysql/updatedatabase.pl
 /Makefile.PL
[4] Do you see an additional directory to add to the regex? Please report.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 25009: Avoid leakages in opac-showmarc.pl

This patch cleans opac-showmarc.pl so it doesn't allow retrieving
records from import batches without requiring any permissions in the
OPAC.

it does so by just removing the code portion that does that.

It also cleans the record fetch operation and how the record processor
is initialized to it actually works :-D

To test:
1. Perform a successful Z39.50 search in cataloguing (this fetches 20
 records usually)
2. Query your DB for a valid import_record_id:
 $ koha-mysql kohadev
 > SELECT * FROM import_records LIMIT 1;
3. Notice some of the MARCXML details (title, author, etc), and the
 import_record_id
4. Point your browser to the opac-showmarc.pl URL like this:
 http://kohadev.mydnsname.org:8080/cgi-bin/koha/opac-showmarc.pl?importid=20
=> FAIL: You get the record! (Bonus: no field/subfield takes place)
5. Hide some obvious subfield on the framework for a known (to you)
 biblionumber
6. Point your browser to:
 http://kohadev.mydnsname.org:8080/cgi-bin/koha/opac-showmarc.pl?id=<biblionumber_here>
=> FAIL: No filtering takes place
7. Apply this patch
8. Repeat 4
=> SUCCESS: You get an error because you did a bad request (no id param)
9. Repeat 6
=> SUCCESS: Subfield filtering actually works!
10. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24487: Add 2 more tests

And make sure tests pass if there is no patron with borrowernumber=10 in
DB.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Ammended test description
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24487: Don't apply matching criteria to path parameters

This patch separates query parameters from path parameters, and uses exact matching for the later.

To test:
1. Apply this patch
2. prove t/Koha/REST/Plugin/Query.t t/db_dependent/Koha/REST/Plugin/Objects.t
SUCCESS => tests ok
3. Sign off

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24487: Regresion test

This patch introduces a regresion test where a path parameter is combined with 'contains' match criteria

To test:
1. apply this patch
2. prove t/db_dependent/Koha/REST/Plugin/Objects.t

Test should fail at this point.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24705: Fix tests for 19.11.x

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>

Bug 24553: Fix tests for 19.11.x

Signed-off-by: Joy Nelson <joy@bywatersolutions.com>