Bug 30907: Fix incorrect uses of Koha::Recall->item_level_recall
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit beb663836b45a77f45195774133cc9b78957fcd5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Petro Vashchuk [Mon, 13 Jun 2022 12:02:28 +0000 (15:02 +0300)]
Bug 30960: Fix JS error message when no pick-up location is selected when placing a hold
It's possible to place item-level hold without selecting a pick-up
location, which causes problems: if the item is then returned,
Koha tells about a hold, but gives error 500.
At patron's hold tab you see the number of holds, but cannot see the
actual holds there. However, if you go to the title in question,
then modify the hold so that it has a pick-up location,
then the hold will work normally again.
This patch fixes already existing but not working JS error message and
ensures that hold cannot be made while pickup location is undefined.
To reproduce:
1. Go to admin page, to the libraries configurations, and disable
pickup location for one of them.
2. Pick any biblio that has items that have that same library as a
default pickup location.
3. When placing the item-level hold, notice that the pickup location
dropdown box is empty by default. Keep it empty, place the hold.
4. Go to the patron's page of the patron who you placed that hold for,
check that it doesn't show the new hold.
5. Apply patch.
6. Repeat steps 2 and 3, it shouldn't let you make the item-level hold
until you select a specific pickup location.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 505b62b4d2ff9617733547d41088bdae37b4506d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 23 Jun 2022 17:29:26 +0000 (17:29 +0000)]
Bug 31005: Don't inlcude attributes only required for other categories
To test:
1 - Create a new patron attribute - check boxes to make it mandatory and visible etc.
2 - Limit it to 'Patron' or other category
3 - Edit a patron not in that category
4 - Attempt to save
5 - 500 Error
6 - Missing mandatory extended attribute (type=MAND)
7 - Apply patch
8 - Attempt aedit again
9 - It succeeds!
10 - Edit a patron in the category with MAND required
11 - on the edit page, right click teh attribute - click 'delete node'
12 - Submit the form
13 - 500 error, but this time that's good, the attribute check works
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit bc0264bae4769fc75133f0e10f13fc6edd86f016)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 23 Jun 2022 17:22:53 +0000 (17:22 +0000)]
Bug 31005: Unit test
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 39c39430766f66008a465e1d023830c49b1f6122)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is a mix of Nick's patch and Jonathan's comment on it. I tested it
with KTD using MySQL 8 and it works correctly.
To test:
1. Launch KTD with bells and whistles:
$ docker compose -f docker-compose.yml \
-f docker-compose.mysql8.0.yml \
up -d
2. Inside of it, do:
$ koha-mysql kohadev
> update systempreferences set value="21.1200015" where variable="version";
> \q
$ restart_all
$ updatedatabase
=> SUCCESS: All good :-D
3. Run:
$ koha-mysql kohadev
> update systempreferences set value="21.1200015" where variable="version";
> ALTER TABLE user_permissions DROP PRIMARY KEY;
> \q
$ updatedatabase
=> FAIL: You get:
Upgrade to 21.12.00.016 [12:47:09]: Bug 30060 - Update user_permissions to add primary key and remove null option from code column
ERROR - {UNKNOWN}: DBI Exception: DBD::mysql::db do failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'IF EXISTS `PRIMARY`' at line 1 at /kohadevbox/koha/C4/Installer.pm line 739
4. Apply this patch
5. Run:
$ updatedatabase
=> SUCCESS: Update goes well
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d3e6c3c7090ed706a152c6c465efc767fc0428c1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kevin Carnes [Thu, 9 Jun 2022 06:12:56 +0000 (08:12 +0200)]
Bug 30844: Ensure that allow_nonref is enabled when using older versions of JSON
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cc40bbf1952f67b2e46bae0cf71b8d4fbe0bea3d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kevin Carnes [Wed, 25 May 2022 10:54:25 +0000 (10:54 +0000)]
Bug 30844: The OPAC detail page's browser is limited to the current page of results when using Elasticsearch
When viewing the detail page of the first or last record of a result page,
it's not possible to browse to another page when using Elasticsearch.
To test:
1) Search for "*" in the OPAC
2) Click on the last result of the page
3) Observe that you cannot browse to the next page
4) Apply the patch
5) Search for "*" in the OPAC
6) Click on the last result of the page
7) Observe that you can browse to the next page
8) Sign off
Sponsored-by: Lund University Library Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 71f54a75713c5d5a6acfbdd3fefe1166ea0efafd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 1 Jun 2022 12:36:52 +0000 (14:36 +0200)]
Bug 30726: Fix "yesterday" when limited to past dates
Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 637c580663f2abc5005ed2c96ef324e28c4feb20)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 1 Jun 2022 12:54:34 +0000 (14:54 +0200)]
Bug 30746: Fix JS error on opac-memberentry
Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c699f05970bbef78ec07e16eac5991cd72f9b87a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 23 May 2022 12:59:03 +0000 (12:59 +0000)]
Bug 23659: (follow-up) Correct syspref.sql to match atomicupdate
Missed updating this file when I added another option and renamed another
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit dd9ca0c44e89f922772092160fdd3892541de483)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 18 May 2022 14:21:35 +0000 (14:21 +0000)]
Bug 23659: Add DefaultHoldPickupLocation system preference
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a25b4d78d090a69b46ad07b05f915cc0f849a30c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 3 Jun 2022 11:35:34 +0000 (11:35 +0000)]
Bug 30893: Fix documentation in update_patrons_category.pl
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f279cdd30fa73241d87d9bb46c21f34c4370d472)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 31 May 2022 06:23:30 +0000 (08:23 +0200)]
Bug 30868: (bug 29684 follow-up) Fix borrowernumber var in template
borrower_data does not contain the borrowernumber, it is sent
separately.
Test plan:
1. Edit a patron record (for example: Henry Acevedo).
2. Note that the URL is http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl?op=modify&destination=circ&borrowernumber=19
3. Change date of birth to yesterday.
4. Save.
5. Error message displayed above the Save and Cancel buttons:
The following fields are wrong. Please fix them.
- Patron's age is incorrect for their category. Ages allowed are 18-999.
6. Note that the URL is now http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl
7. Fix date of birth (for example: change year to 2000).
8. Select Save.
=> Without this patch you get: "Patron not found. Return to search."
=> With this patch applied the patron's data is saved
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9f1cfa0bd31abdf54cb2ccd9eddae674dcaedc97)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Slava Shishkin [Fri, 3 Jun 2022 14:47:46 +0000 (17:47 +0300)]
Bug 30884: Fix jQuery selector to correctly detect active tab
To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
is sent with empty data.
Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f0062c67d6628ded2db76a9bb16a44e694acbaac)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Jun 2022 22:59:56 +0000 (22:59 +0000)]
Bug 30886: Show pending recall on item on OPAC
The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.
Sponsored-by: Catalyst IT Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8f09ef75c365fd20dcdfefb92122e1b0c6afa6d6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Jun 2022 21:23:55 +0000 (21:23 +0000)]
Bug 30885: Display recall data correctly
This page does not pull the recall columns correctly.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place an item-level recall on that item.
5) Go back to the staff interface and search for the item. Confirm that when you go
to the record detail page, it explodes and errors are shown.
6) Apply patch and refresh page.
7) Confirm page loads as expected.
8) Check the Status information for the item in the Holdings table.
Confirm it shows the recall information correctly.
9) Check in the item and confirm the recall as waiting for Patron A.
10) Go back to the record detail page and confirm the Status information
for the item shows as Waiting in the Holdings table.
Sponsored-by: Catalyst IT Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b1ee10ee5111eb5346ac8c285a776f8bd51e778)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 1 Jun 2022 11:59:09 +0000 (13:59 +0200)]
Bug 30876: Use Koha::Biblio
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b60d59eb89a1250da5122ce6acea49a9197650cd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30876: Fix wrong call to ->search in list context
The code is clearly incorrect as ->search no longer returns a list when
called in list context.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8beb878e5b1276cf6924364d9a6e7caccbad065c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Tue, 24 May 2022 18:27:30 +0000 (18:27 +0000)]
Bug 30840: Add support for barcode filters to course reserves
This bug adds support for barcode filters on the inputs in the course reserves module.
To test:
1 - Set itemBarcodeInputFilter to 'Remove spaces from'
2 - Find a barcode in your system and add spaces between each characters
e.g. 3 9 9 9 9 0 0 0 0 0 0 8 1 8
3 - Past that barcode into the checkin box, success
4 - Browse to course reserves, ensure you have a course or create on
5 - Test adding a reserve, batch adding a reserve, and batch removing reserves
6 - The pasted barcode does not in any
7 - Apply patch and restart
8 - Pasted barcode with spaces can now successfuly be added, batch added, and batch removed from courses
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b8a18702d291210f9d62ca9daa747ec06f2cc8f6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 27 Jan 2022 16:55:34 +0000 (16:55 +0000)]
Bug 29961: Make horizontal scroll bar always visible on acqui/z3950_search.pl
To test:
1. In Acquisitions make a basket and add something "From an external source"
2. Search for a title and click on the 'MARC' button, make sure the MARC prview is both tall and wide.
3. You will not see the horizontal scroll bar unless you scroll all the way to the bottom of the preview.
4. Apply patch.
5. Try steps 1 & 2 again, this time you should see the horizontal scroll bar as soon as the MARC prveiw loads.
Note: I put the CSS on multiple lines for better readability
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 98c5ecd0d5bbced740c55c85ed1db226f1569b67)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Sat, 14 May 2022 12:29:25 +0000 (12:29 +0000)]
Bug 30756: Rename to Koha_MetadataRecord_Authority
What we are actually testing here.
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: remove Dumper
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e96ba5ac7b3c12e8c231cc7e38fd49ebc13bc39c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Sat, 14 May 2022 12:07:17 +0000 (12:07 +0000)]
Bug 30756: Further adjustments to Koha_Authority.t
Remove use of exported_records file in favor of TestBuilder.
Remove conditional tests with SKIP block. Create reservoir record.
Test plan:
Run t/db_dependent/Koha_Authority.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 24ff8b4a855680820761f6e6cfb7405526c82e2a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Sat, 14 May 2022 07:42:42 +0000 (07:42 +0000)]
Bug 30756: Ground work for improving Koha_Authority.t
Move stuff into two subtests.
Test plan:
Run t/db_dependent/Koha_Authority.t.
If you have no imported auths, you will still see skips.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 96867a4fdcde290a260085b38b5e285c455828db)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30855: (follow-up) Rewrite tests using Basic authentication
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b4ea3da6f1d1b6066317d885cb4a676a56e0f147)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch renames the route to make it consistent for future additions.
To test:
1. Run
$ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
$ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
$ kshell
k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 891972d0d335c4cf13ea458a024256367c21b6ad)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 18 May 2022 15:08:39 +0000 (15:08 +0000)]
Bug 27697: Only preopulate search when we have found a single biblio
This patch uses the url parameter we created in 23475 to determine whether
we should populate the search bar or not
Note - a bookmark with this param will still populate search term with last search
To test:
1 - Search staff client for 'cat'
2 - Browse to a patrons checkouts and click on a title, or just go directly to a details page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850
3 - Search bar says 'cat'
4 - Apply patch
5 - Repeat 1-2
6 - Search bar is not populated
7 - Search "dalek war box set" or a term that finds a single record in your instance
8 - Search bar is populated
9 - Note url like: http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850&found1=1
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 022330b8d26b81e53f9c4af7798fa42ff48bdaa3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 19 May 2022 03:50:13 +0000 (17:50 -1000)]
Bug 30781: Fix warning in GetPreparedLetter
Test by running :
prove t/db_dependent/Letters.t
Check you dont see warning :
Use of uninitialized value $val in substitution iterator
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 34b84b68e509c9172b850dad4dbc5b7e9f518225)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 19 May 2022 03:47:18 +0000 (17:47 -1000)]
Bug 30781: Add unit test for substitute with undefined value
Add unit test that generates warn.
This may be usefull as no regression test.
Run prove t/db_dependent/Letters.t
You see warn :
t/db_dependent/Letters.t .. 1/84 Use of uninitialized value $val in substitution iterator at /kohadevbox/koha/C4/Letters.pm line 607.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2e0243c378158755660d7bc95e15ad32dd6d0ebf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Tue, 22 Mar 2022 18:14:52 +0000 (14:14 -0400)]
Bug 30337: Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended
Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended,
and shows the wrong number of "patrons with holds" which presumably tells the
librarian how many copies to pull from the shelves.
Test Plan:
1) Create a record with one or more holdable items
2) Place two holds on the record
3) Note they show in the holds to pull report
4) Suspend the priority 2 hold
5) Note the report continues showing that 2 patrons have holds
6) Resume the priority 2 hold
7) Suspend the priority 1 hold
8) Note the hold disappears from the holds to pull report
9) Apply this patch
10) Restart all the things!
11) Reload the holds to pull report
12) The report should show one hold that needs an item pulled to fill it!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e536229292617e2f6e5bade47e3fbad1a0101ea4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Wed, 13 Apr 2022 12:18:13 +0000 (12:18 +0000)]
Bug 30523: Quiet console warning about missing shortcut-buttons map file
This patch updates the Flatpickr plugin shortcut-buttons which adds the
"Yesterday," "Today," and "Tomorrow" links to Flatpickr widgets. This
updates it to the latest version, 0.4.0.
The file is modified in two ways: The version information is added to
the top of the file, and the sourceMappingURL line is removed from the
bottom. This quiets browser console warnings about a missing map file.
To test:
- apply the patch and clear your browser cache.
- Go to Circulation -> Check out and check out to a patron.
- Click "Checkout settings" and click the "Specify due date" field.
- In the pop-up calendar, test all controls, including the shortcut
links, to confirm that everything works as before.
- In the browser console there should be no warning related to
shortcut-buttons-flatpickr. (Firefox didn't have the warning, Chromium
can be used.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fcb08b0e932a2ce1b70e90b2c7219aebc72ac4f4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Tue, 31 May 2022 09:36:37 +0000 (11:36 +0200)]
Bug 28723: Replace "No title" by an empty string
This is to be consistent with what is done in checkouts.js
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5a90eb17e6c9a0d54376584e356dcacef4aab6c8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Tue, 20 Jul 2021 12:45:35 +0000 (14:45 +0200)]
Bug 28723: Fix holds table display when a biblio has no title
Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 35874fa380707ba8eedda825e9cdc7ad47755958)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
== Test plan ==
1. Go to http://localhost:8081/cgi-bin/koha/patroncards/manage.pl?card_element=layout
2. See that the page title in your browser window title is wrong because it contains <span>
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. See that the page title in your browser window title is wrong because it contains <span>
5. Go to http://localhost:8081/cgi-bin/koha/admin/aqbudgetperiods.pl
6. Administration => Budgets => Click on a budget => planning => plan by months
7. See that the page title in your browser window title is wrong because it contains <span>
8. Refresh the pages and see that the titles are correct
9. Sign off :)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 44d6528b566e5c16eba9b15f8aa24667293766c3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 28529: Make biblio-level hold itemtype count against max rules
The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 81bdce5c4390e1914ff6cfb2adb469027904f659)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ad14a8eee8a8f229518ee0d40c7d9c807f1c0937)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Thu, 12 May 2022 07:05:50 +0000 (07:05 +0000)]
Bug 30731: Remove Readonly::XS::MAGIC_COOKIE
This variable does not make sense anymore, since the Readonly::XS
module is not listed in the cpanfile. So it will not be required
the versions_info loop.
Test plan:
Run t/Installer_PerlModules.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 900aa4bf51b131c9f362cb647edf1bb0de2fbcc0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Wed, 11 May 2022 14:26:06 +0000 (14:26 +0000)]
Bug 30731: Silence noisy CPAN modules in C4::Installer::PerlModules
Main change is replacing 'no warnings' by local $SIG{__WARN__}.
The modules are sorted now too. This will make results of requiring
them one after the other a more predictable experience and improves
the output of koha_perl_deps.
Test plan:
Run about. Check plack intranet log.
Run koha_perl_deps.pl -a
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit da1115336bfab44eb9eebaae214c355fa19fc36d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Wed, 11 May 2022 14:35:18 +0000 (14:35 +0000)]
Bug 30731: Unit tests
Installer_pm.t can safely be discarded, having Installer_PerlModules.t.
Note: Without the second patch, the test about versions_info being silent
might fail. With the second patch, it should pass.
Note that since the order of requiring the cpan modules varies (without
the second patch), the results (potential warnings) vary too.
Test plan:
Run t/Installer_PerlModules.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2265739a378c1d31c5ea3d4beb07cbaa4d04e62b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 25 May 2022 08:04:58 +0000 (10:04 +0200)]
Bug 30842: 2FA - Allow at least one old TOTP
We allow one old token when we are setting the two-factor auth, we
should reuse the same settings when validation the authentication
itself.
Test plan:
Setup 2FA for your logged-in user
Logout/Login
Have a look at the code and wait for 30 sec before using it (< 1min
however)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f6110ce4170ced8ba246e295cc547c9794566ef1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Nind [Wed, 18 May 2022 02:21:14 +0000 (02:21 +0000)]
Bug 30786: Fix capitalization in advanced search system preferences
This fixes the capitalization in the descriptions for the
AdvancedSearchTypes and OpacAdvancedSearchTypes system preferences.
Test plan:
1. In the staff interface, search the system preferences for
'AdvancedSearch'.
2. Review the current descriptions for the AdvancedSearchTypes and
OpacAdvancedSearchTypes system preferences.
3. Note that "..Shelving Location.." is used instead of "..Shelving
location..".
4. Apply the patch.
5. Refresh the page.
6. Sentence case is now used for "Shelving location" in the
descriptions (as per coding guideline HTML4: Upper and lower cases
in strings).
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 17b7ae56c539bfaaf2dae75f6855e9cda13ec904)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Fri, 20 May 2022 08:05:43 +0000 (08:05 +0000)]
Bug 30788: Unit test
Run:
prove t/db_dependent/Circulation/CalcFine.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e59e2c4b8f58b267227bd5159e90a3ce015d0beb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Fri, 20 May 2022 07:43:15 +0000 (09:43 +0200)]
Bug 30788: Fix warning in Overdues.pm when fine is empty in circ rules
Argument "" isn't numeric in multiplication (*) at /usr/share/koha/lib/C4/Overdues.pm
To test:
* Create a issuing rule where fine is empty, but a fine interval is set.
Fine amount: empty
To do this, remove the 0 displayed in the input field before saving.
Fine charging interval: 5 or any other numeric value
When to charge: Start of interval
Fine grace period: 0
* Check out an item with the due date yester (use specify due date)
* Run misc/cronjobs/fines.pl -v
* You should see above warn in the output
* Apply patch
* Rerun fines.pl, there should be no warn.
* Run:
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Fines.t
t/db_dependent/Circulation.t
t/db_dependent/Overdues.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 368bdcf4e95e1cbb93f53f1d5dd976b98f59bf29)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Joonas Kylmälä [Sat, 21 May 2022 19:23:32 +0000 (19:23 +0000)]
Bug 30828: Remove useless 'type' parameter in placerequest.pl
To test:
1) Grep for placerequest.pl in the source code and check that
request.tt is the only place where the type parameter is passed.
Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: adjust commit title Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 54a6c73c6d6e94554b7e4c15554e08d79e3eb578)
Owen Leonard [Tue, 17 May 2022 11:19:19 +0000 (11:19 +0000)]
Bug 30774: Typo: i %sEdit %sReserve %s
This patch removes an out of place "i" and replaces it with a space. The
patch also removes obsolete CDATA markers in the page's JavaScript.
To test, apply the patch and go to Course reserves.
- Create a course if necessary, then view the details of your course.
- Click the "Add reserves" button.
- Enter a barcode or biblionumber.
- On the next page, the heading "Reserve [title] for [course]" should
look correct, with no extra "i" at the beginning of the line.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 72dcf17ea0f23b0e23272231d39632bc5b57db73)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Nind [Sat, 28 May 2022 18:55:59 +0000 (18:55 +0000)]
Bug 30772: (follow-up) Age restriction message
Improve age restriction message.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a614cb21268a21cb21f8aa59025bef5d5c1bb0d0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2022 12:04:41 +0000 (12:04 +0000)]
Bug 30772: Terminology: Replace instances of "reserve" with "hold"
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e68ecb3311eb34e8b1f12a98ccf51576c03f3307)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/selenium/regressions.t
=> FAIL: You see several
item-level_itypes set but no itemtype set for item (985) at /kohadevbox/koha/Koha/Schema/Result/Item.pm line 905.
2. Apply this patch
3. Repeat 1
=> SUCCESS: No more item type warnings
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 169c535e880bf1233622042cab76351b7dbc65ca)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2022 12:30:28 +0000 (12:30 +0000)]
Bug 30761: Fix typos in OPAC reset password template
This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.
To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d1f67e4287e888beb205c48a6769d967deb1777e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch changes the word 'langues' to 'languages' in the description
of the following system preferences:
- OPACXSLTDetailsDisplay
- OPACXSLTListsDisplay
- OPACXSLTResultsDisplay
- XSLTDetailsDisplay
- XSLTListsDisplay
- XSLTResultsDisplay
To test:
1- Apply patch
2- Check the aforementioned system preferences and make sure the descriptions say 'languages'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 58de13cb9a5efa3fd9c9fd50865eea62ee18ec5b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30853: Add description for baskets in swagger.yaml
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b46396c0035a981f61fbd2c26e0dceb50de0566b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 14 Apr 2022 12:20:09 +0000 (12:20 +0000)]
Bug 30528: Process limits before handling CCL query
This patch moves the code that handles limit processing before that for CCL queries to ensure that special limit cases (branch, multibranch, etc) are handled before adding the limits to the query string
To test:
1 - Apply unit tests patch only
2 - prove -v t/db_dependent/Search.t
3 - It fails
4 - Apply this patch
5 - It passes!
6 - Test searching and confirm things work as epxected
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2da14cf8c10c2d5165220e6657b279b37aa02f81)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 14 Apr 2022 12:19:22 +0000 (12:19 +0000)]
Bug 30528: Unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fde3aefba821c43554adaa53324c81cbe7d2d95a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 31 May 2022 09:29:57 +0000 (11:29 +0200)]
Bug 30870: Don't skip tests if Test::Deep if not installed
We are using Test::Deep in different tests, but from t/db_dependent/Koha.t the tests are skippted if the module is not installed.
We must assume the module is installed
Test plan:
prove t/db_dependent/Koha.t
should return green in ktd
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42290cb43deb7dde668d9a55467c44ba705e665c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 31 May 2022 09:26:36 +0000 (11:26 +0200)]
Bug 29883: Add test
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 740258568368b7741df1a95d7bf330c527bf9054)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Petro Vashchuk [Fri, 14 Jan 2022 09:57:39 +0000 (11:57 +0200)]
Bug 29883: avoid uninitialized value warn in GetAuthorisedValues sub
GetAuthorisedValues is defined with optional parameter $category but it
is instantly interpolated without preventing "Use of uninitialized value
$category in concatenation (.) or string at .../C4/Koha.pm line 491."
warning.
As category param is optional, we can avoid throwing that warn as it is
something that can happen and is not an actual error:
C<$category> returns authorized values for just one category (optional).
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 44e126bcc7fae369e13c533eea79f00ef41f2ff1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
* Missing summary for routes
* Missing error_code description for 500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b431117e4e20e15f48cfa3c5dca5c228b96b4af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30854: Missing description for 'import_record_matches' in swagger.yaml
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 15f8d8f42b6f2bdd14d5488cda92ae69d4b4f3c2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 2 Jun 2022 17:24:21 +0000 (17:24 +0000)]
Bug 30892: (bug 30742 follow-up) Send single bib as a holdable bib
To test:
1. Try placing hold
2. Everything seems to work but no hold gets placed.
3. Apply patch
4. Verify holds are no placed correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d37b9e6013ab2f1c3cb94e68dd75a2e5092fe5e4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 13 May 2022 15:23:30 +0000 (15:23 +0000)]
Bug 30742: Remove 'bad_bibs' and send a list of holdable bibs
Currently place request gets a list of bad_bibs that is created via javascript on the
template. It ignores this list
Ths patch instead doesn't add info for bad bibs, and provides a list of the bibs that
can be held
To test:
1 - Attempt multi hold with some items that can be held, and one that cannot due to notforloan
2 - Fill in pickup locations and place hold
3 - Note hold is place on bib with no avilable items and hsows twice in results
4 - Apply patch
5 - repeat with another patron
6 - Note no aidditonal hold on record with notforloan items
7 - Note with with not for loan items appears only once in results
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 503a7f0ab10b6689c2ac6e42f7f788d383575028)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 13 May 2022 14:01:48 +0000 (14:01 +0000)]
Bug 30742: Prevent placing holds on items/records where all items notforloan
This patch does a few things:
1 - Adds itemtype not for loan status to display
2 - Adds a conditional to display notforlaon status as the reason a hold cannot be placed
3 - Seperates the lower 'Place hold(s)' buttons for single and multi holds into two template sections
4 - Handles the case where all bibs in a multi hold have no items available
5 - Disables the button for single hlds when all items are unavailable
To test:
1 - Find or create a record with all items of itemtype marked 'notforloan'
2 - Attempt to place single hold on this record from staff client
3 - See one disab;ed button, one enabled 'Place holds' button
4 - Click 'Place holds' - hold placed
5 - Cancel hold
6 - Place multiple holds with some bibs that can be held, and this one that cannot
7 - Notice message that 'Cannot place hold on some items'
8 - Click 'Place holds' - hold is generated for the notforloan bib
9 - Apply patch
10 - Place single hold
11 - Note you now see not for loan status on items
12 - Note the red x also includes message abnout not for loan status
13 - Note the 'Place hold' button is disabled
14 - Attempt multi hold
15 - Message now includes "No items available: One or more records have no items that can be held"
16 - Click 'Place holds'
17 - Above still places the hold - this is for a followup patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1c1c1e19f5529b5728ed7770a030feabf1a9b8df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 23 May 2022 12:18:11 +0000 (12:18 +0000)]
Bug 30831: Unit test
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: minor typo fix
(cherry picked from commit f08951f044e2cdac7a9bdf4cdfb6897b9de9e1f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 23 May 2022 12:25:53 +0000 (12:25 +0000)]
Bug 30830: Add Koha Objects for Koha Import Items
To test:
prove -v t/db_dependent/Koha/Import/Record/Items.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6cd0249725f211f0df77ba367c379f0e5c5e1d4e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3c0c375d8e073c9eb765179fa7b3c3d0136b5174)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 15 Apr 2021 10:12:23 +0000 (12:12 +0200)]
Bug 28152: Fix import_items row creation if duplicate barcode
We are trying to insert "duplicate item barcode" into import_items.itemnumber (integer),
it fails with "Incorrect integer value: 'duplicate item barcode' for column 'itemnumber' at row 1"
To reproduce:
Export a biblio with an item
Import it
=> The item is not added, and there is no new row in import_items.
The error only appears in the log if you comment the close STDERR and
close STDOUT lines
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c7a8a456c7dcc0bc2a015968f7a2c0e9ac2370f0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 10 Jan 2022 09:15:35 +0000 (10:15 +0100)]
Bug 29828: Prevent additional content to be created without default
When creating or editing an additional content, the form is submitted if
only the title of the 'default' tab is filled in.
We should submit the form only if both title and content exist.
Test plan:
Create a new content using text editor (codemirror)
Confirm that the form is submitted only if title and content from the
default tab are not empty
Try again with wysiwyg (tinymce)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 05934b89b1b43ceb88928b48a4e1fd69708ac61b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 18 May 2022 14:12:11 +0000 (14:12 +0000)]
Bug 30747: Make column settings work for otherholdings table using forEach loop
To test:
1. Turn on SeparateHoldings and find a record that has some items at
different home libraries.
2. Look at the Other holdings(x) tab. Notice there is no Columns tool
(gear icon).
3. Go to Table Settings, try hiding columns from the otherholdings
table. You cannot.
4. Apply patch.
5. Now under the Other holdings(x) tab you should see the Columns
button, it should work.
6. Go back to Table settings and try hiding columns, it should work.
7. Now try uploading an item level cover image, make sure all columns
are still properly hidden and the Columns tool works
8. Try steps 6 & 7 but with the regular holdings table. Confirm that all
colums can properly hide.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Included a rename to table_name(s). Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Thu, 19 May 2022 14:52:21 +0000 (15:52 +0100)]
Bug 30730: (follow-up) Simplify query
This patch drops the 'fetch all non-loanable items' query used in the
subsequent query as part of the 'not_in' and instead replaces it with a
simple filter on 'notforloan => 0'
Test plan
Run the included unit tests before and apply applying the followup.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Shi Yao Wang [Tue, 17 May 2022 15:08:06 +0000 (11:08 -0400)]
Bug 30730: Holds to Pull should not list items with a notforloan status
Remove items with a notforloan value other than 0 because items that are
potentially holdable (with negative notforloan status) are not wanted in holds to pull.
Test plan:
1- Have a bib with 2 items, both holdable. Give one of these items a notforloan status with a negative value (like Ordered in the testing docker data).
2- Place a title-level hold on your bib
3- Confirm your bib is showing on Holds to Pull as expected, prompting staff to pull the item that does not have a not for loan status (correct!)
4- Take the item that does not have a not for loan status and check it out to a different patron, make sure not to fill or cancel your hold
5- Reload Holds to Pull, see your title is still listed and now Koha is directing staff to the item with a notforloan status
6- Apply the patch
7- Reload Holds to Pull, see your title with a notforloan status is gone
8- Run `prove t/db_dependent/Koha/Holds.t` and all tests should pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Wed, 11 May 2022 20:51:20 +0000 (10:51 -1000)]
Bug 30735: Fix filtering by patron attribute with AV in overdues report
In Circulation > Overdues, if there are seachable patron attributes
they can be used in left filters. Search does not work if this attribute
is linked to an authorized values category.
The problem is that AV code is compared to the AV desciption in :
if (grep { $attrval eq lc($_->[1]) } @{ $pattrs->{$code} }) {
Looking at a Data::Dumper of the var $pattrs you see for example :
$VAR1 = {
'ATT1' => [
[
'afr',
'Afrikaans'
]
]
};
First row is attribute code and second row is desciption.
It works for an attribute without AV because in this case
'avdescription' is undefined so code is stored as description :
push @{ $pattrs->{$row->{attrcode}} }, [
$row->{attrval},
defined $row->{avdescription} ? $row->{avdescription} : $row->{attrval},
];
This patch fixes the code and removes commented line.
Also reviews the SQL query :
- avcategory is useless
- use alias attrcode for borrower_attributes.code to be more explicit
Test plan :
1) Create a patron A with overdues
2) Go to Circulation > Overdues
3) Check you see the patron A
4) Create a patron attribute, searchable, with an authorized value
category, ie LANG
5) Edit patron A to set a value in this attribute
6) Go to Circulation > Overdues
7) Select attribute value and apply filter
8) Check you see the patron A
9) Redo test plan with a patron attribute, searchable, without an
authorized value category
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The basic MARC editor has its own button associated with each subfield
for emptying the contents of the input. Since the Flatpickr "X" icon
causes a layout problem and would be redundant, we can hide it on this page.
Alex Buckley [Wed, 18 May 2022 04:07:06 +0000 (04:07 +0000)]
Bug 30797: Add the calendar.inc include to addbiblio.tt
addbiblio.tt throws the '$(...).flatpickr is not a function' because it
is missing includes to flatpickr.min.js and shortcut-buttons-flatpickr.min.js
To fix this the addbiblio.tt should include the calendar.inc file (like
additem.tt does) which includes to those aforementioned JS files.
Test plan:
1. Edit a MARC bibliographic framework
2. Make the 902$d subfield visible in the Editor
3. Also set the 902$d subfield plugin='dateaccessioned.pl'
4. Catalogue a new biblio record
5. Notice the 902$d subfield has not been pre-populated with todays date
6. Right click, choose 'Inspect', observe this JS error in the console: "Uncaught
TypeError: $(...).flatpickr is not a function"
7. Apply patch, and restart services
8. Repeat steps 4-6 and this time observe the 902$d is pre-populated,
and there is no flatpickr JS error in the console
Sponsored-by: Chartered Accountants Australia and New Zealand Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 18 Mar 2022 15:03:30 +0000 (15:03 +0000)]
Bug 30009: Do not set MARCNOTES to empty list in list context
AMENDED:
We should not pass an empty list here, but just undef in order to
prevent creating a shift of elements in the hash.
To test:
1 - Find or create an invalid marc record
2 - View in staff client
3 - Note tab Descriptions(1) has no content
4 - Apply patch, reload
5 - No empty tab
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 6 May 2022 20:32:32 +0000 (20:32 +0000)]
Bug 30714: Do no log update to holdingbranch
When an item from another branch is checked in, the holdingbranch is
updated, and this change is logged. We record the checkin in
statistics, we do not need the cataloguing update logged
To recreate:
1 - Enable cataloguing log
2 - Check in an item with a different holding branch
3 - Check the action logs
4 - There is a cataloguing log for the holdingbranch update
5 - Apply patch
6 - Repeate with another item
7 - No log added!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Joonas Kylmälä [Mon, 16 May 2022 18:56:05 +0000 (18:56 +0000)]
Bug 30776: import missing subroutine to fix import_webservice_batch.pl
Test plan:
1) Apply patch and notice the following error is gone:
$ perl misc/cronjobs/import_webservice_batch.pl
Undefined subroutine &main::GetStagedWebserviceBatches called at misc/cronjobs/import_webservice_batch.pl line 46.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 28 Apr 2022 11:37:31 +0000 (11:37 +0000)]
Bug 30640: Focus does not always move to correct search header form field
This patch updates the staff interface's global JavaScript to
accommodate changes in the way focus is being handled after the jQuery
upgrade (see: https://github.com/jquery/jquery/issues/4950).
The "focus" class is removed from search header include files so that
there isn't a contradiction between which form field has the focus class
and which form field is displayed in the active tab.
To test, apply the patch and view various pages in the staff interface.
- On pages where focus is not being directed to a form field within the
main content of the page, the form field in the active search header
tab should have focus on page load:
- Patron details
- System preferences
- Cities and towns
Also test pages where a tab other than the first one is preselected:
- Bibliographic details page
- Patron lists
On these pages, focus should move to the active tab's form field when
you switch tabs.
- On pages where focus is being sent to another form field, it should
work correctly:
- Patrons home page
- Check in
- Acquisitions home page
Katrin Fischer [Fri, 13 May 2022 10:25:27 +0000 (10:25 +0000)]
Bug 30720: Batch action links in result list missing permission checks
In the staff interface you can select records for merging, batch editing,
and batch deleting from the result list. This fixes the code to check for
the specific batch edit records and batch delete records permissions, so
those actions are only shown if the user has the right permissions.
As there is no merge record permission yet, it's assumed that edit_cataloge is
needed as before (no change in behavior).
To test:
- Create a staff user with only catalogue and editcatalogue permissions.
- Do a search in the catalog of the staff interface
- Select a few records from result list to unlock the Edit button on top
- Verify it shows all three options: edit, delete and merge
- Apply patch
- Verfiy now only merging is shown
- Add the records_batchdel and records_batchmod permissions from the tools
area one after another and verify the display changes accordingly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Aleisha Amohia [Fri, 6 May 2022 03:33:59 +0000 (03:33 +0000)]
Bug 30701: Make Upload Tool buttons work on mobile-size screen
When the Upload tool is accessed on a smaller (mobile) screen (less than
768 pixels wide), the Upload and Browse buttons cannot be clicked. This
patch fixes that.
To test:
1) Go to Tools -> Upload
2) Make the screen narrower, either by opening your browser's Inspector
tool and using Responsive Design Mode, or by dragging in the edge of the
window to make it narrower.
3) Notice that when the screen becomes narrower than 768px, the sections
squash together and the padding between them is lost. Try to click on
the Browse and Upload buttons, notice you cannot.
4) Apply patch and refresh the Upload Tool
5) Ensure the screen is narrower than 768px. Confirm there is now
padding between the sections, and the buttons are clickable again.
Sponsored-by: Chartered Accountants Australia and New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Thu, 12 May 2022 07:23:58 +0000 (21:23 -1000)]
Bug 30740: Link to authorities 'used in' should not use equal
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log