Bug 21798: We need t::lib::TestBuilder::gimme_a_biblio
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 15 Nov 2018 13:35:33 +0000 (08:35 -0500)]
Bug 21495: Regression in hold override functionality
The changes caused by the patches for bug 11512 have broken existing
workflows for many libraries and are widely considered to be a bad move.
We should revert this behavior.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 18 Jan 2019 17:10:40 +0000 (17:10 +0000)]
Bug 22168: Improve styling of new chart settings for reports
This patch updates a number of aspects of the reports chart creation
interface: Chart creation form is now shown in a modal window, and a
separate link has been added to show or hide the chart itself.
Also changed: Minor markup and JavaScript cleanup.
To test, apply the patch and go to Reports -> Saved reports.
- Run a report which returns more than one column.
- On the report results page, click the "Create chart" button. The chart
settings form should appear in a modal window.
- Confirm that the form controls work correctly: Each label should give
focus to the correct input. Changing the chart type should show or
hide the appropriate form fields.
- Click the "Draw" button. The modal should disappear and the chart
should be shown.
- Above the chart should be a "Hide chart" link which works to hide (and
then show) the chart.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements a route to change patron's password for
unprivileged users. It's intended for using in the OPAC (or however
consumers find it useful).
It is a starting point for the public API, and the bug also implements
the on/off switch some community members asked for.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons_password.t \
t/db_dependent/api/v1/auth.t
=> SUCCESS: Tests pass! i.e.
- RESTPublicAPI is honoured
- The /public/patrons/:patron_id/password endpoint works as
expected
- Use your favourite API testing tool to try the endpoint.
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22061: Add a /public namespace that can be switched on/off
This patch adds a check in Koha::REST::V1::Auth::under to catch all
routes that begin with 'public' (inside /api/v1). If they match, and the
RESTPublicAPI syspref is off, then an exception is thrown, rendering a
403 error to the consumer.
Otherwise the routes are processed as usual. This is THE on/off switch
for the public REST API. The target use case: people not wanting an OPAC
or public interaction with the API besides privileged users.
In order to test, the rest of the patches are needed because the only
way to test a route is having it in the spec.
To test:
- Apply the patches
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth.t
=> SUCCESS: tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch introduces an endpoint for changing a patron's password. It
targets privileged user with the right permissions, changing some
patron's password.
To test:
- Apply this patchset
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons_password.t
=> SUCCESS: tests pass!
- Play with the different use cases highlighted by the tests, on your
favourite REST testing tool (Postman, RESTer on FF, etc).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 14 Jan 2019 06:21:39 +0000 (06:21 +0000)]
Bug 19770: Add cardnumber and CSS classed to patron info on waiting holds
Patch makes use fo patron-string.inc for displaying the patron information
on the waiting holds report.
It also adds spans with classes for phone and email.
To Test:
1 - View the holds awaiting pickup report
2 - Note there is no cardnumber for the patron
3 - Apply patch
4 - Cardnumber shows now
5 - Verify the same works for 'Holds over' tab
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 18661: Made "Replace only included patron attributes" default on patron import
Test Plan:
1) Go to the import patrons page and notice that "Replace all patron attributes" is selected by default in the Patron Attributes section.
2) Apply this patch
3) Go back to the import patrons page and notice that "Replace only included patron attributes" is delected by default.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 29 Jun 2018 16:27:28 +0000 (16:27 +0000)]
Bug 10562: Improve Leader06 Type Labels in MARC21slim2OPACResults.xsl
This patch takes the suggestions in Bug 10562 and implements those
changes in MARC21slim2OPACResults.xsl. This patch also makes the
following changes:
- De-duplicate famfamfam icons: Remove the /silk subdirectory and move
non-duplicates to famfamfam/; Correct paths to these images in
templates and CSS
- Improve the granularity of some material type icon choices: Show
"Film," "Picture," or "Object" instead of "Visual material."
- Remove unnecessary title attributes from material type images
- Implement the kind of changes made in Bug 18235, "Add classes to
material type icons on result lists and detail pages"
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
helene hickey [Thu, 17 Jan 2019 02:28:57 +0000 (02:28 +0000)]
Bug 15110: Improve decreaseHighHolds system preference description
To test:
1) Apply patch
2) Go to Koha admin
3) Search in system prefernces for 'high demand'
4) Verify that the system prefernce 'decreaseLoanHighHolds' is in the
results of the search
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Mon, 14 Jan 2019 09:16:53 +0000 (09:16 +0000)]
Bug 22124: Update cataloguing plugin system to not generate type parameter in script tag
Test plan:
1) Apply the patch
2) Have defined some cataloguing plugin which generates javascript - for
example dateaccessioned.pl
3) Go to cataloguing/adding item and show source
-> there should be no type parameter in script tag in code added by
cataloguing pulgin
4) prove t/db_dependent/FrameworkPlugin.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ethan Amohia [Wed, 16 Jan 2019 04:01:44 +0000 (04:01 +0000)]
Bug 22136: Added 'ExtendedPatronAttributes' notes to 'Import Patrons' notes.
Fixed ExtendedPatronAttributes typo.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 18 Jan 2019 13:05:55 +0000 (13:05 +0000)]
Bug 22134: (follow-up) Simplify check for expired patron
This patch move the check for "is_expired" to the template and removes
unnecessary code from the script.
The page now correctly handles messages for patrons who are about to
expire, as defined in the NotifyBorrowerDeparture preference.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Select a patron who will expire within the period defined in
NotifyBorrowerDeparture.
- On the patron detail page you should see a message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 15 Jan 2019 14:53:07 +0000 (14:53 +0000)]
Bug 22134: Add account expiration information to patron details
This patch modifies the patron detail template in the staff client so
that when a patron's registration is expired a message shows at the top
of the page along with the same "Renew" and "Edit" links which appear on
the checkout page. Links are also shown next the the expiration date in
the body of the page.
This patch also corrects the capitalization of the "Edit Details" link
on circulation.tt.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
- On the patron's checkout page the "Edit details" link in the
expiration message should have correct capitalization.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr> Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
helene hickey [Thu, 17 Jan 2019 01:09:04 +0000 (01:09 +0000)]
Bug 19818: Add id into tag html from moremember.tt
1) Go to the patron details for a patron
2) On the right of the screen, right click one of the labels below
'Library use' etc, and Inspect Element
3) View <li> tags which should now each have a unique <id> tag for each
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 11 Jan 2019 14:52:28 +0000 (14:52 +0000)]
Bug 22102: Markup fixes for OPAC article request page
This patch makes a few improvements to the OPAC article request page:
- Improve the breadcrumbs menu by adding a link to the title
- Add a header with the record's title
- Wrap the "no article requests" message in the correct dialog div
- Remove obsolete CDATA marker
To test, apply the patch and log in to the OPAC
- Peform a search which will return multiple results
- Click "Request article" on a title for which article requests can be
submitted.
- Confirm that the breadcrumbs menu looks and works correctly.
- Click "Request article" on a title for which article requsts are not
allowed.
- Confirm that the message is correctly styled.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 4 Dec 2018 16:52:44 +0000 (16:52 +0000)]
Bug 21945: Clean up stock rotation template
This patch makes some minor markup upgrades to the stock rotation
template: Replace some YUI markup with Bootstrap; Add some missing <tr>
tags; Remove invalid "type" attribute from <script> tag.
To test, apply the patch and go to Tools -> Stock rotation. Confirm that
the page looks correct and adjusts well at various browser widths. Test
with various views: New rota, edit rota, manage stages, manage items.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 11 Jan 2019 17:06:45 +0000 (17:06 +0000)]
Bug 22104: Clean up patron API keys template
This patch makes two corrections to the patron API key template: Convert
to Bootstrap grid and correct class on "new key" button.
To test, apply the patch and enable the RESTOAuth2ClientCredentials
preference.
- Open a patron record in the staff client and choose More -> Manage
API keys.
- On the API keys page, confirm that the page adjusts well at various
page widths.
- Confirm that the size of the "Generate new client id/key pair" button
matches the buttons in the toolbar.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Thu, 17 Jan 2019 02:55:46 +0000 (02:55 +0000)]
Bug 22026: Removed 'use Modern::Perl;' from Koha::REST::classes
Test plan:
1) Check all Koha/REST files and confirm that 'use Modern::Perl;' has
been removed.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Fri, 30 Nov 2018 10:26:54 +0000 (10:26 +0000)]
Bug 21926: Enhance OAI-PMH:archiveID system preference description
Test plan:
1) Apply the patch
2) Go to Administration -> System preferences -> Web services, section
OAI-PMH
3) See description on OAI-PMH:archiveID and confirm it does make sense
and have the link to implementation guidelines
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
helene hickey [Wed, 16 Jan 2019 23:20:38 +0000 (23:20 +0000)]
Bug 21290: Updating documentation for ModItem
To test:
Review the patch and check it is now updated correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 2 May 2018 17:56:43 +0000 (17:56 +0000)]
Bug 21964: Update two-column templates with Bootstrap grid: Patrons part 2
This patch modifies several patron templates to use the Bootstrap grid
instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags in the modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Patrons home page
- New patron
- Patron -> Fines -> Create manual invoice
- Patron -> Set permissions
- Patron -> Change password
- Patron -> Edit
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Wed, 16 Jan 2019 20:53:40 +0000 (20:53 +0000)]
Bug 20679: Removed 'rows per page' from report print layout
Test plan:
1. Create a report or view an existing report
2. Notice that 'Rows per page:' is visible
3. Print report (Ctrl+P)
4. Confirm that on printed report, 'Rows per page:' is no longer visible
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Wed, 16 Jan 2019 23:10:35 +0000 (23:10 +0000)]
Bug 22149: Fixed grammar in the manage_circ_rules_from_any_libraries description
Test plan:
1. Review patch and confirm that the sentence makes sense
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jack Kelliher [Tue, 15 Jan 2019 03:24:17 +0000 (03:24 +0000)]
Bug 21930: Reworded message on permissions.inc
1. Go to patrons account, more, Set Permissions.
2. Dropdown the Parameters section.
3. Text should display "If not set the logged in user could only edit
circulation rules for its the own library (please note that
manage_circ_rules is still required)"
4. Apply patch and reload page
5. Text should now display "Edit circulation rules from any library. If
not set the logged in user could only edit circulation rules for their
own library (please note that manage_circ_rules is still required)"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
helene hickey [Tue, 15 Jan 2019 21:08:47 +0000 (21:08 +0000)]
Bug 22029: Google plus has been removed from the social links.
For testing:
1) Make sure SocailNetworks is enabled
2) Find a book and verify that in the social links, there is a Google
Plus option
3) apply patch and verify that the Google Plus option is no longer there
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Tue, 15 Jan 2019 21:34:32 +0000 (21:34 +0000)]
Bug 20569: Improved description of CheckPrevCheckout system preference
The CheckPrevCheckout preference can be overriden by a setting in the
patron categories, I've edited the options to reflect this.
Test plan:
1. Check the CheckPrevCheckout system preferences and confirm that the
options are clear
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jasmine Amohia [Wed, 16 Jan 2019 00:54:52 +0000 (00:54 +0000)]
Bug 22138: updated tab names on members/paycollect.pl
Test plan:
1. Give patron outstanding fees
2. Search patron and select 'Make payment'
3. Select either 'Pay' or 'Write off'
4. Confirm that first tab title remains as 'Transactions'
5. Confirm that current tab title remains as 'Make a payment'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 15 Oct 2018 15:10:28 +0000 (15:10 +0000)]
Bug 21573: Move lists barcode and biblionumber entry form to modal
This patch modifies the staff client lists page so that the
barcode/biblionumber entry form from the left hand sidebar into a modal
window, triggered by a button in the toolbar.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View the contents of a list in the staff client, logged in as a user
who has permission to add items.
- Click the "Add items" button. A modal window should appear with the
barcode/biblionumber entry form.
- Submit barcodes and/or biblionumbers and confirm that the correct
titles are added to the list.
- Log in again as a user who does not have permission to add to the
list. Confirm that the button isn't present.
Signed-off-by: Mackey Johnstone <mackeyfj@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 26 Sep 2016 17:43:20 +0000 (17:43 +0000)]
Bug 17353: Add phone number column to checkout search
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 10 Oct 2018 18:16:10 +0000 (18:16 +0000)]
Bug 20729: Update style of datepickers
This patch updates the styling of form fields which are configured to
use the jQueryUI datepicker widget. Some CSS has been added, and the
default datepicker configuration has been changed.
To test, apply the patch, rebuild the staff client CSS file, and clear
your cache if necessary. Test pages which include a datepicker to
confirm that they look correct and work correctly. Some examples:
- Circulation -> Check out -> Specify due date
- Patrons -> Add patron -> Date of birth, registration date, expiry
date fields
- Serials -> Search subscriptions -> Search results page sidebar
- Tools -> News -> Add news item
And confirm that this change hasn't adversely affected the calendar
tool:
- Tools -> Calendar
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 27 Nov 2018 19:25:09 +0000 (19:25 +0000)]
Bug 21399: Sort patron fines in OPAC by date descending as a default
This patch modifies the DataTables configuration of the logged-in user's
"Fines and charges" table in the OPAC so that the table is sorted by
date, descending.
To test, apply the patch and log in to the OPAC as a user with multiple
fines. Go to the "your fines" page and confirm that the table is sorted
by default on the first column with the newest entries first.
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 24 Oct 2018 16:09:12 +0000 (16:09 +0000)]
Bug 21913: Clean up payment details page
This patch makes various corrections and improvements to the payment
details page:
- Grid converted to Bootstrap
- Correct title tag
- Add patron toolbar
- Adding missing patron-related JavaScript
- Improve some language
To test, apply the patch and locate a patron who has one or more
payments on their account.
- Open Fines -> Account -> Details of a transaction
- Confirm that the page looks correct and adjusts well at various
browser widths.
- Confirm that patron toolbar items work correctly
Signed-off-by: Jose-Mario <jose-mario.monteiro-santos@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a typo in circulation_batch_checkouts.tt that makes Koha skip
a warning if the user cannot borrow due to circulation rules.
This patch corrects this typo.
To test:
1. In Administration > Global system preferences, 'Allow'
BatchCheckouts and enter patron categories in
BatchCheckoutsValidCategories
2. Go to Administration > Circulation and fines rules
3. Enter a rule where a certain category of patrons (that is in
BatchCheckoutsValidCategories) cannot take out a particular item type
4. Search the catalog for an item of that item type
5. Copy the barcode
6. Go into patrons and find a patron of that category
7. Click on the Batch checkout tab
8. Paste the barcode in the box and click Check out
9. It should say 'Too many checked out'
10. Apply the patch
11. Try the check out again, it should show both warnings ('Too many
checked out' and 'This patron can't check out this item per library
circulation policy')
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Tue, 27 Mar 2018 19:31:36 +0000 (19:31 +0000)]
Bug 19945: (follow-up) optimization and test correction
The double call to CanItemBeReserved was pointless in
the C4/Reserves.pm HoldItem, as CanBookBeReserved calls
CanItemBeReserved and even returns that code.
Additionally, the tests failed, because there were 5
tests not 4.
TEST PLAN
----------
prove t/db_dependent/ILSDI_Services.t
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Arnaud [Wed, 10 Jan 2018 15:31:54 +0000 (15:31 +0000)]
Bug 19945: ILSDI - Return the reason a reserve is impossible
Currently, the ILDSI services HoldTitle and HoldItem always return a
"NotHoldable" code is the reserve is impossible. We need to know why
Test plan:
- Apply this patch
- Place a hold on a non reservable title using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1&request_location=)
- you should get the reason instead of NotHoldable,
- Place a hold on a non reservable item using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=1&bib_id=1&item_id=1)
- you should get the reason instead of NotHoldable,
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On creating manual credits, the (newly introduced) branchcode should be
set now. This trivial patch makes it work.
To test:
- Create a manual credit for a known patron
- Using MySQL check the result:
$ sudo mysql
> SELECT * FROM accountlines WHERE borrowernumber=<known_id>;
=> FAIL: The created accountline row has NULL for the branchcode
- Apply this patch
- Create a manual credit for the patron
- Run:
> SELECT * FROM accountlines WHERE borrowernumber=<known_id>;
=> SUCCESS: branchcode is set correctly
-Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Buckley [Wed, 31 Oct 2018 13:52:29 +0000 (13:52 +0000)]
Bug 21241: (follow-up) Syspref to control fallback to SMS when no email is defined
This patch adds a new system preference (FallbackToSMSIfNoEmail)
which if enabled Koha will send suggestion notices by SMS if a borrower
has a defined SMSalertnumber and no email.
The use of the syspref prevents automatic fallback to sending suggestion notices as SMS when there's no defined email.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply patches, restart memcached and plack
6. Check the 'FallbackToSMSIfNoEmail' syspref
is disabled
7. Repeat steps 2,3 and observe in the message_queue
table the message_transport_type = 'email'
i.e. If the syspref is disabled then the message is still sent by email
to borrowers with defined smsalertnumber and no email address
8. Enable the 'FallbackToSMSIfNoEmail' syspref
and repeat steps 2,3 and notice the
message_transport_type = 'sms'
i.e. If the syspref is enabled then the message is sent by sms to
borrowers with defined smsalertnumber and no email address
9. Repeat steps 2,3 with a patron with an email
address and no smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref
enabled and disabled and notice in both cases the
message_transport_type = email.
i.e. If a borrower has an email address defined the suggestion
notice will always be sent via email
10. Repeat steps 2,3 with a patron with no email or smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref enabled and disabled and notice in both cases the message_transport_type = email
i.e. If the borrower has no smsalertnumber and no email defined then the
suggestion notice will be sent by 'email'
11. Run t/db_dependent/Suggestions.t
Sponsored-By: Brimbank Libraries, Australia Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21241: (follow-up) Renamed system preference
Sponsored-By: Brimbank Library, Australia Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Buckley [Thu, 16 Aug 2018 14:06:56 +0000 (02:06 +1200)]
Bug 21241: Conditional to choose appropriate message_transport_type for suggestion notices
Introducing a conditional into C4/Suggestions.pm to check if no patron
email exists but a smsalertnumber does exist then the suggestion notice
message_transport_type is set to 'sms', otherwise the suggestion
message_transport_type='email'.
This ensures patrons with no email address still receieve their
suggestion notices because at present the message_transport_type is
hardcoded to 'email'.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply this patch, restart memcached and plack
6. Repeat steps 2,3 with the same patron and query the message_queue
table again and notice this time the message_transport_type = 'sms'
7. Repeat steps 2,3 with a patron with no smsalertnumber or email
address. Query the database and observe the
message_transport_type=email.
If no smsalertnumber is set then the message_transport_type is set to
'email' by default
Sponsored-By: Brimbank Library, Australia Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Lucas Gass [Fri, 25 Jan 2019 15:37:21 +0000 (15:37 +0000)]
Bug 22207: course reserves page does not have unique <body> id
Test plan: Go to cgi-bin/koha/opac-course-reserves.pl in the OPAC and
make sure the body id is opac-course-reserves
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Mikaël Olangcay Brisebois <mikael.olangcay-brisebois@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 7 Jan 2019 13:48:55 +0000 (13:48 +0000)]
Bug 21089: Overlapping elements in ordering information on acqui/supplier.pl
This patch changes the HTML structure of the vendor edit page so that
the markup is a little simpler. CSS is modified to match. This structure
should serve as a model for other similar form structures:
To test, apply the patch and regenerate the staff client CSS.
- Go to Acquisitions -> Vendor search -> Vendor -> Edit vendor
- In the "Ordering information" section, confirm that the position of
radio buttons looks correct.
- Confirm that radio button labels work correctly.
- Confirm that the adjacent dropdown menus work well.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21478: Make Koha::Hold->suspend reject found holds
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Tue, 22 Jan 2019 08:45:02 +0000 (09:45 +0100)]
Bug 21877: Use AuthorisedValues.GetDescriptionByKohaField for notforloan in checkout
Using only TT plugin for authorised value description is a better code.
Test plan :
Part 1:
1.1) On a catalog with items.notforloan defined with authorized values category NOT_LOAN
1.2) Define in NOT_LOAN an authorized values 1 with description 'at the beach'
1.3) Define in NOT_LOAN an authorized values 2 with description empty
Part 2:
2.1) Set preference 'AllowNotForLoanOverride' to 'Don't allow'
2.2) Edit an item with notforloan=1
2.3) Checkout this item => You see 'Item not for loan (at the beach)'
2.4) Edit an item with notforloan=2
2.5) Checkout this item => You see 'Item not for loan'
Part 3:
3.1) Set preference 'AllowNotForLoanOverride' to 'Allow'
3.2) Edit an item with notforloan=1
3.3) Checkout this item => You see 'Item is normally not for loan (at the beach)'
3.4) Edit an item with notforloan=2
3.5) Checkout this item => You see 'Item is normally not for loan'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Tue, 22 Jan 2019 08:47:22 +0000 (09:47 +0100)]
Bug 21877: Show authorized value description for withdrawn in checkout
During checkout the withdrawn information is displayed in a message :
"Item has been withdrawn".
Like in other pages and like notforloan, we should display the withdrawn authorized value description.
This patch adds this display.
Add <span> so that translation does not change.
Also adds class 'co-withdrawn' (like in checkin 'ci-*' classes) to ease hidding this new information via CSS.
Test plan :
1) On a catalog with items.withdrawn defined with authorized values category WITHDRAWN
2) Define in WITHDRAWN an authorized values 1 with description 'dropped in trash'
3) Define in WITHDRAWN an authorized values 2 with description empty
4) Edit an item with withdrawn=1
5) Checkout this item => You see 'Item has been withdrawn (dropped in trash)'
6) Edit an item with withdrawn=2
7) Checkout this item => You see 'Item has been withdrawn'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 24 Jan 2019 14:57:46 +0000 (14:57 +0000)]
Bug 22203: Holds modal does not link to patorn account
To test:
1 - Place a hold for a patron
2 - Check the item in at the pickup location
3 - Note the holds modal does not link to patron
4 - Apply patch
5 - Check in item again
6 - Patron name in modal is a link
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 14 Jan 2019 14:17:23 +0000 (14:17 +0000)]
Bug 21989: JS error in "Add orders from MARC file" - addorderiso2709.pl
This patch undoes the changes to addorderiso2709.tt introduced by Bug
19753. The item information tab can include embedded JavaScript for
cataloging plugins, and these don't currently work with JS in the
footer.
To test, apply the patch and test the JavaScript driven features of the
"Add to basket from a staged file" page:
- Acquisitions -> Vendor -> Basket -> Add to basket from a staged file
- MARC and Card previews, select all/clear all
- Item information tab: Cataloging plugins for fields like date
acquired, barcode
- Default accounting details tab: Show inactive control
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The $circControlBranch variable was originally set to be used to pick
the right dropbox branch. It was only used in MarkIssueReturned, to get
the right Koha::Calendar object. As this responsability was moved top to
the AddReturn caller, and the fact that _GetCircControlBranch is
actually used for fines rules, there's no use for it in this context.
And it was left on the previous patch as a mistake.
To test:
- Make sure the variable is not actually used:
$ git grep '$circControlBranch'
=> SUCCESS: removed variable is not actually used.
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The current tests only check some failure use cases. This patch makes it cover more use cases
To test:
- Apply this patchset
- Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22049: Make MarkIssueReturned rely on returndate only
This patch changes the params accepted by
C4::Circulation::MarkIssueReturned by removing the $dropbox_branch
param.
This passed branchcode was only used to initialize the Koha::Calendar
object, but the date arithmetic has already taken place in a couple
places before we reach this point. This logic needs to be simplified
(bug 14591), and this is the starting point.
To test:
- Apply this patch
- Run:
$ git grep MarkIssueReturned
=> SUCCESS: Check all the uses of the function either originally passed
undef, or now pass the same date that would've been calculated anyway,
in the returndate param.
- Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22051: Make Koha::Object->store translate incorrect value exceptions
This patch adds a new condition to Koha::Object->store so it catches
incorrect value-related DBIC exceptions.
This DBIC exceptions get now translated into
Koha::Exceptions::Object::BadValue exceptions with relevant parameters
passed.
To test:
- Apply the exception and unit tests patches
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Object.t
=> FAIL: Tests fail because this exception handling code is not
implemented
- Apply this patch
- Run:
k$ prove t/db_dependent/Koha/Object.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new exception to be thrown in Koha::Object->store when
a DBIC exception is thrown regarding bad data format.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/Koha/Exceptions.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Wed, 12 Dec 2018 08:54:01 +0000 (08:54 +0000)]
Bug 21002: Add ->add_debit method to Koha::Account
Sponsored-by: PTFS Europe Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Wed, 12 Dec 2018 08:53:37 +0000 (08:53 +0000)]
Bug 21002: Add tests for Koha::Account::add_debit
Sponsored-by: PTFS Europe Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Wed, 12 Dec 2018 17:59:54 +0000 (14:59 -0300)]
Bug 21993: Display a user-friendly message when the CSRF token is wrong
Instead of dying!
Test plan:
Assuming you have a patron with borrowernumber=51 and another one that
can be deleted with borrowernumber=42
- authorities-home.pl
* Delete an authority record
* hit /cgi-bin/koha/authorities/authorities-home.pl?op=delete
- basket/sendbasket.pl
* Send a basket to someone
* hit /cgi-bin/koha/basket/sendbasket.pl?email_add=1
- members/apikeys.pl
* Generate and delete an API key for a patron
* hit /cgi-bin/koha/members/apikeys.pl?patron_id=51&op=delete
- members/deletemem.pl
* Delete a patron
* hit /cgi-bin/koha/members/deletemem.pl?member=42&op=delete_confirmed
- members/mancredit.pl
* Add a manual credit
* hit /cgi-bin/koha/members/mancredit.pl?borrowernumber=51&add=1
- members/maninvoice.pl
* Add a manual invoice
* hit /cgi-bin/koha/members/maninvoice.pl?borrowernumber=51&add=1
- members/member-flags.pl
* Change permissions for a patron
* hit /cgi-bin/koha/members/member-flags.pl?member=51&newflags=1
- members/member-password.pl
* Change the password for a patron (from the staff interface)
* hit /cgi-bin/koha/members/member-password.pl?member=51&newpassword=aA1
- members/memberentry.pl
* Edit some patron's info
* hit /cgi-bin/koha/members/memberentry.pl?borrowernumber=51&op=save
- members/paycollect.pl
* Pay an individual fine
* hit something like /cgi-bin/koha/members/paycollect.pl?borrowernumber=51&pay_individual=1&accounttype=L&amount=1.00&amountoutstanding=1.00&accountlines_id=157&paid=1
You may need to edit some values
- tools/import_borrowers.pl
* Import some patrons
* hit /cgi-bin/koha/tools/import_borrowers.pl?uploadborrowers=1
- tools/picture-upload.pl
* Upload an image for a patron
* You will need to edit the html content
hit Home › Tools › Upload patron images
then locate the csrf_token input and modify its value
Note for QA:
- Opac is not done as blocking_errors.inc does not exist for this
interface
- ill/ill-requests.pl
I did not manage to replace this occurrence
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 2 May 2018 18:13:33 +0000 (18:13 +0000)]
Bug 21965: Update two-column templates with Bootstrap grid: Patrons part 3
This patch modifies several patron templates to use the Bootstrap grid
instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
Markup has been corrected in paycollect.tt and readingrec.tt where a
table row lacked <tr>.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 8 Nov 2018 17:10:00 +0000 (17:10 +0000)]
Bug 21792: Switch two-column templates to Bootstrap grid: Serials part 3
This patch modifies several serials templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and go to Serials.
- Add or edit a new subscription. The "create an item..." and "do not
create an item..." labels should look correct.
- Search for subscriptions
- Select two or more subscriptions to batch edit.
- The subscription batch edit page should look correct and adjust
well to various browser widths.
- View a subscription and click the "Renew" button. The subscription
renewal pop-up window should look correct.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Apply this patch
- Run:
$ git grep update_password
=> SUCCESS: Only references are in Auth_with_ldap.pm and not related
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Auth.t \
t/db_dependent/Koha/Patrons.t \
t/db_dependent/Search/History.t \
t/db_dependent/selenium/authentication.t \
t/db_dependent/selenium/regressions.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22048: Use set_password opac/opac-password-recovery.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22048: Use set_password in create_superlibrarian.pl
Use $patron->set_password instead of update_password. In this case the
'skip_validation' param needs to be set as no password strength checks
are expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
- Verify that changing the password and userid of a patron by globally
editing they works,
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes member-password.pl use $patron->set_password instead of
update_password. The side effect is that setting password and userid
become separate steps in the code.
For the password all the initial checks are the same, but password
strength is checked on calling set_password and an exception is thrown.
So instead of checking the password quality, we just wait for exceptions
and behave the same as before.
Bonus: you will notice I reused the initially fetched $patron object.
Things get simpler :-D
To test:
- Verify that changing the password / userid for a patron works as usual
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test, verify the onboarding process sets the password correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log