Jonathan Druart [Wed, 10 Feb 2016 10:32:52 +0000 (10:32 +0000)]
Bug 15783: AddAuthorisedValue - Remove the subroutine
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The C4::Koha::AddAuthorisedValue is only called twice from
reports/guided_reports.pl and insert an authorised value.
This job can be achieve easily using the Koha::AuthorisedValue module.
Test plan:
1/ Create a new guided report
2/ Use an existing group and/or subgroup of reports
3/ Save
4/ Update an existing report
5/ Use an existing group and/or subgroup of reports
6/ Save
7/ Create or update an existing report
8/ Remove its assigned group and subgroup
9/ Save
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jesse Weaver [Wed, 6 Jan 2016 20:19:10 +0000 (13:19 -0700)]
Bug 15813: Fix list-context call to ...->guarantor in opac-memberentry.pl
(was: Bug 14658: (followup) fix issue with list context on DBIC call)
While working on bug 14659, it was discovered that the call to
...->guarantor in list context will cause the hash to be misaligned if
there is no guarantor.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 04:29:59 +0000 (04:29 +0000)]
Bug 15826 - Use Font Awesome icons in confirmation dialogs - Tools
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 02:49:33 +0000 (02:49 +0000)]
Bug 15827 - Unfriendly message when saving overdue notice/status triggers
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Tue, 16 Feb 2016 17:49:02 +0000 (12:49 -0500)]
Bug 15828: Upload patron images is hard to read
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 03:22:46 +0000 (03:22 +0000)]
Bug 15829 - Rotating Collections is under Patrons on Tools Home - Should be Catalog
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 04:01:13 +0000 (04:01 +0000)]
Bug 15830 - Move Rotating Collections actions into a drop-down list
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 18 Feb 2016 16:44:52 +0000 (11:44 -0500)]
Bug 15859: Move some basic MARC editor controls into settings menu
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Natasha [Tue, 19 Jan 2016 00:56:56 +0000 (00:56 +0000)]
bug 12920 - Remove AllowRenewalLimitOverride from pl scripts and tt files, use Koha.Preference instead
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 19 Jan 2016 20:29:24 +0000 (20:29 +0000)]
Bug 13474: Adding untranslatable log actions to viewlog.tt
Added 'Run'
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
(Amended to remove tab chars to make qa tools happy) Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Sat, 23 May 2015 04:22:26 +0000 (00:22 -0400)]
Bug 14097 - Correct noise under Debian
The first four patches do not create any noise under Ubuntu 14.04 LTS.
Running on Debian Jessie:
[SNIP]
keys on reference is experimental at t/db_dependent/UsageStats.t line 88.
keys on reference is experimental at t/db_dependent/UsageStats.t line 106.
keys on reference is experimental at t/db_dependent/UsageStats.t line 119.
keys on reference is experimental at t/db_dependent/UsageStats.t line 136.
keys on reference is experimental at t/db_dependent/UsageStats.t line 153.
keys on reference is experimental at t/db_dependent/UsageStats.t line 162.
keys on reference is experimental at t/db_dependent/UsageStats.t line 587.
[SNIP]
Instead of having 'keys $foo->{bar}', 'keys %{$foo->{bar}}' was used.
TEST PLAN
---------
1) On a DEBIAN system (Jessie gives above messages)
apply the first 4 patches interactively.
2) $ prove t/db_dependent/UsageStats.t
-- trigger noise like above.
3) apply this patch
4) $ prove t/db_dependent/UsageStats.t
-- no noise triggered.
5) koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Julian FIOL [Tue, 12 May 2015 12:28:56 +0000 (14:28 +0200)]
Bug 14097: Rollback issue and warning corrected
The rollback issue came from '_count' testing.
It used a 'DROP TABLE' and 'CREATE TABLE' which implicitly do autocommit.
That's why the final rollback could not be.
This patch no longer uses t::lib::TestBuilder either because it was the cause
of the warning on Comment #1 :
"DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now data is preserved, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add unit tests to C4::UsageStats
Subroutine :
(V : tested, X : Not tested)
V NeedUpdate
V BuiltReport
X ReportToCommunity
V _count
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/UsageStats.t
-- All tests should run successfully
/!\ I have 1 warning but I don't know where it can come /!\
(in cleanup) DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308
TEST PLAN OPTIONAL
------------------
Go check bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 40,5%
Branch : 0,0%
Condition : 0,0%
Subroutine : 55,6%
Coverage AFTER this patch :
Statement : 81,0%
Branch : 100,0%
Condition : 100,0%
Subroutine : 88,8%
Aleisha [Mon, 18 Jan 2016 03:30:44 +0000 (03:30 +0000)]
Bug 15416: Warns on guided_reports.pl
Initialising $phase variable to be '' if not defined.
To test:
1) Go to Reports -> Guided Reports Wizard
2) Notice warns
3) Apply patch
4) Refresh page
5) Confirm warns are gone and page still works as it should
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Warns are gone. Page still works as expected
Hector Castro [Thu, 28 Jan 2016 16:40:34 +0000 (10:40 -0600)]
Bug 15693: Unnecessary punctuation mark when check-in an item in a library other than the home branch
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Mark Tompsett [Thu, 11 Feb 2016 02:51:26 +0000 (21:51 -0500)]
Bug 15795: C4/Members.pm is floody (Norwegian Patron DB)
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Colin Campbell [Wed, 17 Feb 2016 12:47:56 +0000 (12:47 +0000)]
Bug 15841 Circulation module's true value misplaced
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Wed, 17 Feb 2016 15:32:03 +0000 (16:32 +0100)]
Bug 15845: Renewal date in circulation.pl is not always correct and not even used
If you have a patron category with a hard renewal date, the enrolllment
period will be zero. You cannot calculate the renewal date as is done
in the script currently.
Even more, the renewaldate template var is not even used.
Test plan:
[1] Verify that checkin/checkout works as expected.
[2] Git grep on renewaldate
[3] Check the code in circulation.pl for "$renew"
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Juan Romay Sieira <juan.sieira@xercode.es>
Patch works as expected. From a biblio detail page, the link
'OPAC view: Open in new window' opens a new browser window. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Wed, 10 Feb 2016 20:43:27 +0000 (20:43 +0000)]
Bug 13778: Putting patron lists buttons into a dropdown menu
To test:
1) Go to Tools -> Patron lists
2) If there are no lists, confirm there is a message box saying 'There are no patron lists.'
3) Create a list if you do not already have one.
4) Confirm that in the 'Actions' drop down menu next to the list, the options to 'Add patrons',
'Edit', 'Delete', and 'Print patron cards' are all there and work as expected.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 18 Feb 2016 15:06:41 +0000 (10:06 -0500)]
Bug 15600: System preferences broken toolbar looks broken
This patch reverts some deletions made to staff-global.css in Bug 11559.
The deletions broke the appearance of the floating toolbar in system
preferences.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> System preferences and view a tab with enough
content to allow you to scroll and test the appearance of the floating
toolbar. Confirm that it looks correct.
- Open the advanced cataloging editor and confirm that its toolbar looks
correct.
- Open the normal cataloging editor and confirm that the floating
toolbar looks correct and works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tollbar looks correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 25 Jan 2016 12:14:56 +0000 (13:14 +0100)]
Bug 15652: Allow current date in datepicker on opac-reserve
If you enable AllowHoldDateInFuture (and its OPAC variant), you get
an additional "Hold starts on date". In that field and in "Hold not
needed after" it was not possible to enter the current date.
Although it does not really make any difference if you leave the startdate
empty or put the current date in it, we concluded that it still makes
a psychological difference. Some patrons were confused when placing a
hold because the first date to select was tomorrow. Instead of telling
them "Yes, but you can leave it empty", we should just allow the current
date as well.
The expiration date ("not needed after") also started on tomorrow. (This
field can really be empty.) But there is actually no reason not to allow
today here too. If the patron only wants it today, why force tomorrow?
How is this arranged? Well, this is one of the simplest Koha patches ever
written. It only changes the minDate option of both date pickers in one
line from 1 to 0.
Test plan:
[1] Allow future hold dates via systempreferences.
[2] Verify that you can enter today in both fields.
[3] Put today in start and expiration date. Place the hold and verify that
you can confirm the hold, check out and check in again.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
- Apply patch
- Go to Tools > Logs (viewlog.pl)
- Verify that the actions appear in the list 'Actions'
- Verify that the new entries filter the list as appropriate (in
combination with Modules: All or with a meaningful selection in
list 'Modules')
Note for testing: You have to set a date in 'Display from' to get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Logs work as advertised, translated in bug 13474
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"Run" could be more explicit.
Marc Véron [Tue, 26 Jan 2016 15:33:49 +0000 (16:33 +0100)]
Bug 15667: Fix date and branch formatting of messages in patron account display
This patch fixes the date and branch formatting of messages in patron
account display.
To verify:
Add a new message to a patron account from the 'checkouts' tab in staff,
the displayed date is not correctly formatted and the branch displays as code
instead as branch name
To test:
Apply patch, verify that the messages and branch names are properly formatted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. The message dates in checkouts tab follow dateformat sypref
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 28 Jan 2016 15:20:07 +0000 (10:20 -0500)]
Bug 15692 - Move some patron entry form JavaScript into members.js
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nick Clemens [Thu, 28 Jan 2016 21:58:37 +0000 (21:58 +0000)]
Bug 15699 - Course reserves instructors should be in form "Surname, Firstname" for sorting purposes
This patch changes the order of the name fields and adds a span class around
each in case of library wanting to customize further
To test:
1 - Enable course reserves
2 - Add some courses with instrcutors
3 - Note they are of form "Firstname Surname"
4 - Apply patch
5 - Note the change
6 - Note span tags
7 - Note you can hide firstname by adding to intranet user js: $(".instr_firstname, instr_separator").hide();
Sing-off note: This patch displays the names as advertised on cgi-bin/koha/opac-course-reserves.pl Sorting
the names would need some more actions but seems not to be intended by this patch. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Mon, 1 Feb 2016 23:12:44 +0000 (18:12 -0500)]
Bug 15719: Silence warning in C4/Language.pm during web install
This problem was discovered the hard way:
- Drop DB
- Create DB
- Webinstaller run until the screen is:
We are ready to do some basic configuration.
Please install basic configuration settings to continue the installation.
-- The error log file will end with an error about splitting
an uninitialized value.
TEST PLAN
---------
0) First patch already applied
1) prove -v t/Languages.t
-- success, but warn prints
2) Apply this patch
3) prove -v t/Languages.t
-- success without warning messages
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. QA test tools run OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Mon, 1 Feb 2016 23:26:41 +0000 (18:26 -0500)]
Bug 15719: Silence warning in C4/Language.pm during web install - tests
Test empty database case.
TEST PLAN
---------
1) prove -v t/Languages.t
-- success (because test case is missing)
2) Apply this patch
3) prove -v t/Languages.t
-- success, but warning printed.
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. QA test tools rus OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Julian Maurice [Thu, 4 Feb 2016 16:42:42 +0000 (17:42 +0100)]
Bug 15743: Allow plugins to embed Perl modules
This patch allows plugins to embed Perl modules by ignoring Perl modules
in plugins directory that don't inherit from Koha::Plugins::Base
TEST PLAN
---------
1) Edit koha-conf.xml to have enable_plugins set to 1, and
the pluginsdir set to a particular path.
2) Create a dummy plugin file. (e.g. {that path}/Koha/Plugin/Kaboom.pm)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Fri, 12 Feb 2016 11:47:22 +0000 (11:47 +0000)]
Bug 15747: Do not use CGI->param in list context - Auth.pm
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Mark Tompsett [Fri, 12 Feb 2016 04:30:36 +0000 (23:30 -0500)]
Bug 15777 - Refactor and fix the RecordProcessor class
TEST PLAN
---------
1) Apply all three patches
2) prove -v t/RecordProcessor.t
-- all should be successful
3) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Fri, 12 Feb 2016 04:23:27 +0000 (23:23 -0500)]
Bug 15777 - Fix base class to prove refactor and fix required
TEST PLAN
---------
1) Apply the testing patch and this patch
2) prove -v t/RecordProcess.t
-- will complain about string use with "use strict".
This is because it is using the module name, instead
of the object instantiated with new().
3) run koha qa test tools.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Wed, 10 Feb 2016 16:18:40 +0000 (11:18 -0500)]
Bug 15777 - Test to prove initialization isn't working correctly.
TEST PLAN
---------
1) Apply this testing patch
2) prove -v t/RecordProcessor.t
-- tests will fail.
3) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Wed, 3 Feb 2016 13:40:20 +0000 (08:40 -0500)]
Bug 15784: Library deletion warning is incorrectly styled
When deleting a library in Administration -> Libraries and groups, the
deletion confirmation message is not styled with the standard "dialog
alert" <div>. This patch modifies the confirmation markup to match the
standard.
Revised to include Font Awesome icons. Depends on Bug 15785.
To test, apply the patch and go to Administration -> Libraries and
groups.
- Try deleting a library. The confirmation box should have the standard
"dialog alert" class.
- Test the 'confirm' and 'cancel' actions and make sure both complete
correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Buttons display as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marc Véron [Fri, 12 Feb 2016 09:19:00 +0000 (10:19 +0100)]
Bug 15808 - Remove "Return to where you were before" from sysprefs
This patch removes the link 'return to where you were before' from
syspref search result page after failing search.
To test:
- Apply patch
- Go to System preferences in staff client, do a search
with something that does not exist
- Verify that a message pops up that does not contain the link.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Fri, 12 Feb 2016 15:26:49 +0000 (15:26 +0000)]
Bug 15811: follow-up Bug 4912: Redirect to the appropriate view after editing/deleting a list
Test plan:
1/ At the opac, go on the the list home page (opac-shelves.pl)
2/ Click on 'new list', create a list and save
=> You should be redirect to the list
3/ Click on edit, save
=> You should be redirect to the list
4/ Delete the list
=> You should be redirect to the list
5/ Edit a list from the list view, save
=> You should be redirect to the list
6/ Click on a list link (op=view)
7/ Edit the list, save
=> You should be redirect to the 'show' view
8/ Delete list
=> You should be redirect to the list
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Wed, 17 Feb 2016 14:33:28 +0000 (09:33 -0500)]
Bug 15843: Move MARC subfields structure JavaScript into separate file
The JavaScript embedded in the MARC subfields structure template is not
dependent on template processing and can safely be moved to a separate
file. This patch does so. Removed in the process is some lines which
were commented out.
To test, apply the patch and go to Administration -> MARC framworks.
- Click 'MARC structure' for a framework you can edit.
- Click 'subfields' for a tag you can edit.
- Click 'Edit' for a subfield you can edit.
- Confirm that tabs and accordian sections work correctly.
- Make changes under Advanced constraints -> Visibility and confirm
that they are saved correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Wed, 17 Feb 2016 14:54:28 +0000 (09:54 -0500)]
Bug 15844 - Correct JSHint errors in staff-global.js
This patch corrects minor errors in staff-global.js according to
warnings raised by JSHint.
To test, apply the patch and run JSHint on staff-global.js. No warnings
should be raised.
To confirm that the behavior of the JS is not changed, clear your
browser cache if necessary and:
- Confirm that the "Help" link opens the help window.
- Confirm that audio alerts work with local and remote sound files
- Confirm that the format() method is still working correctly by, for
instance, opening the detail page for a bibliographic record with
multiple items and choosing 'Edit -> Delete record' from the menu. The
error message should read like "2 item(s) are attached to this
record..."
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. No errors with JSHint CLI (6 errors fixed)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Wed, 17 Feb 2016 17:17:17 +0000 (12:17 -0500)]
Bug 15847: Correct JSHint errors in basket.js in the staff client
This patch corrects minor errors in the staff client's basket.js
according to warnings raised by JSHint.
To test, apply the patch and run JSHint on basket.js. No warnings
should be raised.
To confirm that the behavior of the JS is not changed, clear your
browser cache if necessary and:
- Test adding multiple titles to the Cart from staff client search
results.
- Confirm that adding titles to the Cart triggers a message by the Cart
link.
- Test clicking the "Cart" link in the header menu when the Cart popup
is open but behind the main window.
- Testing emptying the Cart.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. No warnigns raised with jshint tool
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 12549: Hard coded font Paths ( DejaVu ) cause problems for non-Debian systems
Allows for selection of DejaVu font path when installing from the command line. This
is useful for non-debian distributions that don't store the fonts in the same place.
Adds a new configuration variable to Makefile.PL: FONT_DIR
Defaults to the Debian install location for the fonts.
Test plan:
1. Run a CLI install, accepting the defaults.
2. Compare the generated koha-conf.xml to a
previous install - the font path for DejaVu fonts should be the same.
3. Run another CLI install, this time choosing a custom path for the fonts
4. Check that the path selected is reflected in the koha-conf.xml file.
NOTE: 'perl Makefile.pl' and 'make' generates blib/KOHA_CONF_DIR/koha-conf.xml
ran with a weird string for the font dir
copied that koha-conf.xml to my home dir
reran with all defaults
compared the two, and only the font paths differed.
Also, I cleaned up the tabs that snuck in. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 25 Jan 2016 10:31:34 +0000 (10:31 +0000)]
Bug 14244: Does not display patron's info in the checkout history if not authorised
The librarian needs CAN_user_circulate_circulate_remaining_permissions
to see the checkouts patron's information.
Test plan:
The "Patron" column of the checkout history page should only be
displayed of you have the circulate > circulate_remaining_permissions
permission.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
But that really doesn't make sense. People should be able to view the history of circulation without having permission to circulate items themselves
This patch changes the required permissions from circulate to catalogue.
Test Plan:
1. Login as user without the circulate_remaining_permissions
2. Attempt to view Circulation History of an Item
3. Does not work
4. Apply Patch
5. Attempt to view circulation history with a user that has access to the staff side.
6. Can view circulation history now
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Colin Campbell [Wed, 5 Aug 2015 11:55:41 +0000 (12:55 +0100)]
Bug 14507 Use checkpw to check password in Patron Info
Some devices are using patron information responses to validate
patron passwords to govern access to facilities as we
were using C4::Auth::checkpw_hash this only worked in a db password
context not other authentication routines.
The C4::Auth routines are not very consistent and there isnt a dropin
replacement for checkpw_hash this calls checkpw instead.
In a password only environment this behaves as the old version did
returning field CQ as Y if a valid password or no password is passed in
the patron info request and N if an incorrect password is supplied
It should also test against the appropriate authentication sources if
othere autrhentication schemes are in use
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested this with a client who reports that this enables SIP authentication to work correctly with their LDAP server.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Thu, 28 Jan 2016 23:09:43 +0000 (23:09 +0000)]
Bug 14930 [QA Followup] - Allow OpacFineNoRenewals to be 0
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Gus [Tue, 19 Jan 2016 03:12:48 +0000 (03:12 +0000)]
Bug 14930 - Leaving OpacFineNoRenewals blank blocks renewals, but should disable feature
To Test
- Borrower has some fines and checkouts
- Leave OPACFineNoRenewals empty/blank
- Try to renew items in the OPAC
- notice error message
- Add a big value to OpacFineNoRenewals
- notice renewals work
Leaving the OPACFineNoRenewals empty will disable the feature.
Patch works as expected.(Amended to format the commit message and to
remove a warn on line 112 / MV) Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Fri, 15 Jan 2016 10:01:54 +0000 (10:01 +0000)]
Bug 15285: Fix conflict with the treetable plugin
The tables using the treetable plugin don't display correctly (with JS
error).
The lazy way to fix it is to redefine the dom of the table and remove
the button area (B).
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 14 Dec 2015 12:18:33 +0000 (12:18 +0000)]
Bug 15285: Update for 3 specific tables
The checkouts, currency and items lost tables redefine the dom/sDom and
the older C(olvis) should be replaced with the current B(utton).
Test plan:
To test the whole patch set, you will have to test the 4 tables impacted
by this patch as well as the others using the columns settings.
The additem has specific code and should be tested keeping that in mind.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 14 Dec 2015 12:17:43 +0000 (12:17 +0000)]
Bug 15285: Update common files
This patch moves the Button area all tables which does not redefine the
dom/sDom DT parameter.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 14 Dec 2015 12:15:58 +0000 (12:15 +0000)]
Bug 15285: Upgrade DataTables to 1.10.10
The ColVis DataTables plugin is now retired.
We need to upgrade the plugin to 1.10.10 and use the column visibility
module for Buttons.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Thu, 7 Jan 2016 12:34:54 +0000 (12:34 +0000)]
Bug 15306: Do not display the translate link if only 1 language is installed
It doesn't make sense to offer the option to translate an item type
description into another language if there is only one language
installed.
Test plan:
Generates templates for only 1 language
Edit an item type and confirm that the link "translate into..." is not
displayed.
Generates templates for another language
Confirm that the link is now displayed.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Colin Campbell [Thu, 21 Jan 2016 11:30:31 +0000 (11:30 +0000)]
Bug 15479 Add tests for ILS.pm
This patch specifically adds a test for the sub added to
resolve Bug 15479. As no test script existed to add this two
added one which also tests that ILS objects can be instantiated
correctly and offer the required interface
NOTE: This does not apply without the first patch.
Comment #3 suggested a unit test that would fail
before and pass after. So while this code is good,
it missed the before case. -- mtompset
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Colin Campbell [Wed, 6 Jan 2016 12:56:24 +0000 (12:56 +0000)]
Bug 15479 Make ILS cardnumber comparison case insensitive
The borrowers table is defined COLLATE=utf8_unicode_ci which means
that cardnumbers may be saved in either lowercase or uppercase and
these are considered equivalent.
The server was performing a case sensitive comparison between
the incoming patron identifier and that retrieved from the db
As a result some renewals were rejected as being on loan to
another borrower if the stored cardnumber differed in case.
Make code comparison comply with db.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jesse Weaver [Wed, 27 Jan 2016 23:39:22 +0000 (16:39 -0700)]
Bug 15514: Fix error with certain repeatable fields in Rancor
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Thu, 7 Jan 2016 15:26:15 +0000 (15:26 +0000)]
Bug 15517: deleted* tables won't never differ anymore!
These tests will ensure that the 4 deleted* tables won't never differ
anymore.
Test plan:
0/ Do not execute the update DB entry
1/ prove t/db_dependent/db_structure.t
should fail
2/ Execute the update DB entry and update the schema with
misc/devel/update_dbix_class_files.pl
3/ prove t/db_dependent/db_structure.t
should now be happy
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Test pass successfuly. Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Natasha [Wed, 20 Jan 2016 02:11:37 +0000 (02:11 +0000)]
Bug 15605 - Accessibility: Can't tab to add link in serials routing list add user popup
To Test -
1. Go to Serials and search for a title and then click on it.
2. Click routing list and then Add recipients.
3. Search for a patron.
4. Using the tab key try to navigate onto the Add link.
5. Notice it skips Add.
6. Apply the patch and then repeat steps 1-4, notice the Add link can now be accessed through using the keyboard.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
In this patch I have fixed the 'Remove selected items' button.
I have also added a 'Delete batch' button like there is in the Patron Card Creator.
To test:
1) Go to Tools -> Label creator -> New label batch
2) Add 2 items
3) Select the checkbox next to an item you just added and click 'Remove selected items'
4) A pop-up will say that you are yet to select an item. (Please ignore the mistake in the pop-up message, this is being fixed in Bug 15662)
5) Apply patch and refresh. Confirm there is now a 'Delete batch' button in the toolbar
6) Select one item and click 'Remove selected items'
7) Confirm the item is deleted from the batch
8) Select the final item and click 'Remove selected items'
9) Pop-up message will tell you that deleting this item will delete the batch. Click 'Okay'
10) Click 'Delete batch' then 'Okay'
11) Confirm you are redirected to the Labels page and the batch has been deleted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 11 Feb 2016 13:56:42 +0000 (08:56 -0500)]
Bug 15670 - Rename "Cancel" to "Cancel hold" when checking in a waiting item
When checking in an on-hold item which is waiting, the "Cancel" button
cancels the hold, so it should say so. This patch changes the text.
This patch also moves the 'cancel hold' button to the middle, on the
theory that buttons on the left should default to 'confirm' and buttons
on the right should generally imply 'cancel'--as in 'do nothing.' Moving
it to the middle seems like a good place to put it where users will have
to think about clicking it.
To test:
1. Find an hold which has been made 'waiting,' or check in an confirm a
pending hold at your library.
2. Check in that item again and verify that the 'Hold found' dialog
contains a 'Cancel hold' button which works to cancel the waiting
hold.
3. Repeat the process and confirm that the functionality of the other
buttons is unchanged.
Followed test plan, works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 28 Jan 2016 13:54:56 +0000 (08:54 -0500)]
Bug 15691: Show card number minimum and maximum in visible hint when adding a patron
The CardnumberLength system preference defines card number minimum and
maximum allowed values when adding a patron. This information is
currently hidden in a title attribute on the card number input field.
This patch moves the information into a <div class="hint">, matching
other fields in the entry form which offer details about entry
guidelines.
To test, apply the patch and open the new patron entry form. Test for
various values of CardnumberLength, and with 'cardnumber' mandatory or
not mandatory as defined in BorrowerMandatoryField.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Mon, 1 Feb 2016 22:36:06 +0000 (22:36 +0000)]
Bug 15706: (follow-up) Changing to circulate_remaining_permissions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Sun, 31 Jan 2016 21:16:18 +0000 (21:16 +0000)]
Bug 15706: Changing to circulate_remaining_permissions
I have only changed this in the includes for the tabs at the top.
Dependent on Bug 12051 as that patch adds extra tabs to the top which would need to be changed later
To test:
1) Apply Bug 12051 first, then this patch
2) Ensure that Check Out/Check In/Renew tabs still work as they should
3) Check patch for errors or pages I've missed
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 16 Feb 2016 15:58:44 +0000 (15:58 +0000)]
Bug 15833: item.biblioitemnumber returns a biblioitem DBIx::Class object
2 links are wrong on the renew page, because item.biblioitemnumber does
not return the biblioitemnumber as expect the template.
Test plan:
Renew an item and check the item link.
It should contain a valid biblioitemnumber for the 'bi' parameter.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Link repaired. At first glance, I am wondering if biblioitemnumber is
of actual use here; is it only passed back and forth between script and
template?
Srdjan [Mon, 14 Dec 2015 07:01:18 +0000 (20:01 +1300)]
bug_6624: OpenLibrarySearch syspref for OPAC
If set to Yes, OPAC search results and details will include buton from
Open Library Raed API.
In addition, Number of titles held in Open Library and the results link
will be reported on the search results screen.
Aleisha [Tue, 19 Jan 2016 03:44:31 +0000 (03:44 +0000)]
Bug 12051: Adds a Renew tab to the staff client
UPDATE: Added to checkin-search.inc to show up on returns.pl
To test:
1) Apply patch
2) Confirm that there is now a Renew tab on the pages where there is also a Check-in tab only
3) Attempt to renew a book using this, confirm it works as expected
4) Check if I have missed any pages
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Wed, 3 Feb 2016 15:10:30 +0000 (15:10 +0000)]
Bug 15730 - 500 error on returns.pl if barcode doesn't exist
If a librarian enters a barcode that does not match an item in the
database, a 500 error will be displayed instead of the "No item with
barcode" message.
Test Plan:
1) Enter an invalid barcode on returns.pl
2) Note the 500 error
3) Apply this patch
4) Repeat setp 1
5) Note the "No item with barcode" message
Jonathan Druart [Thu, 4 Feb 2016 13:25:14 +0000 (13:25 +0000)]
Bug 15742: Remove unnecessary loop in j2a cronjob
If no branchcode is given, all the libraries are retrieved and the same
query (so without using the libraries loop) is executed for each
library.
Test plan:
Use the j2a.pl cronjob to change the category of a child patron
If a branchcode is passed to the script, only the children from this
branchcode should be updated.
But if it is not passed, all children of the DB should be updated.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Fri, 5 Feb 2016 10:46:28 +0000 (10:46 +0000)]
Bug 15746: Do not record individual payments with randomly picked libraries
When a payment is made individualy, the library used to record this
payment is randomly picked from the library list.
This is because C4::Branch::GetBranch looks at 1. the $branch variable
sent by the template, wich does not exist, then 2. the branchname
cookie, which does not exist neither, then 3. get the first branchcode
from a list of keys (non ordered).
To reproduce:
- Create a manual invoice for a patron
(members/maninvoice.pl?borrowernumber=XXXX)
- Pay this fine using the "Pay" button of the corresponding line from
the members/pay.pl?borrowernumber=XXXX page
Look at the statistics table:
select * from statistics order by datetime desc limit 10;
The branch value of the first line might not correspond to the library
you were using to pay the payment.
Test plan:
Apply this patch, repeat the steps above and confirm that the library
picked is now the one used to pay.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 8 Feb 2016 13:58:56 +0000 (14:58 +0100)]
Bug 15756: Some tests for haspermission in C4::Auth
Test plan:
Run this new test.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests successful. koha-qa.pl run OK. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Julian Maurice [Tue, 9 Feb 2016 10:16:55 +0000 (11:16 +0100)]
Bug 15764: Fix timestamp sent by KOCT
KOCT plugin send UTC timestamp, it should be converted to local timezone
Test plan:
1. Install latest version of KOCT and configure it
https://addons.mozilla.org/fr/firefox/addon/koct/
https://wiki.koha-community.org/wiki/Offline_circulation_firefox_plugin
2. Use it to do a checkout and a checkin. See that timestamps are UTC.
3. Click on "Commit to Koha" under "Log" tab
4. Wait for all operations to be processed
5. In Koha, go to Circulation > Offline circulation and check the
timestamps were correctly converted to the Koha server's timezone
6. Process the pending operations and see that timestamps are still
correct
7. Repeat step 2
8. Now click on "Apply directly"
9. Check the timestamps are correct in Koha
NOTE: I could not get "Commit to Koha" to work for me, but I did
confirm this corrected behaviour with "Apply directly".
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Using the "commit to Koha" option works fine for me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch only affects service.pl, which is not used in any way by the
uploader for desktop client files. No changes to the desktop offline
circ will be needed.
projects / koha.git / log
![8 years agoBug 12920 [QA Followup] - Show override option below checkouts table when allowed](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=05be0f29cd2d7175acdf2ddf4a8805ec5b3df15e){kind=link}
![8 years agoBug 15699 [QA followup] - Only display firstname if present](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=ad63a6b8da1cd91f2e03ec4093d76b00cd3045d2){kind=link}
![8 years agoBug 14507 [QA Followup] - Restore comment, tidy sub](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=f56ad87648ddef5cba66a4cbae9efb53a221c09a){kind=link}
![8 years agoBug 14930 [QA Followup] - Allow OpacFineNoRenewals to be 0](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=655e35649c1877224d184de2baf82e3a505ec999){kind=link}
![8 years agoBug 15479 [QA Followup] - Tidy sub to remove tabs causing qa script to fail](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=d268d428fd984aeb76f617e0e93ef6fdea543230){kind=link}
![8 years agoBug 15742 [QA Followup] - Tidy script](/gitweb/images/date_time.gif?p=koha.git;a=commit;h=0277c545b0369046e3d2785689ea52b99d84962f){kind=link}
