Kyle M Hall [Wed, 20 Feb 2013 14:34:38 +0000 (09:34 -0500)]
Bug 9673 - Track when items are marked as lost or withdrawn
Add date fields to track when an item was marked as lost or withdrawn.
Display those fields on catalogue/moredetail.pl
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a record with items, browse to the 'items' tab ( moredetail.pl )
4) Mark an item as lost, verify the field "Lost on:" displays below
the "Lost status" field with todays date.
5) Mark the item as not lost, verify the field no longer displays
6) Repeat steps 4 and 5 with the Withdrawn field.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Fri, 8 Nov 2013 15:15:33 +0000 (16:15 +0100)]
Bug 9807: (follow-up) reindent basketgroup.tt
Basketgroup.tt is very hard to read. This patch simply reindents it.
No visible changes expected
Regression test :
- check the list of opened and closed basketgroups for a vendor is
displayed properly
- check an individual basketgroup (closed and opened) is displayed
properly
- check you can edit a basketgroup and save changes
- check you can print and export a basketgroup
- check you can close and reopen a basketgroup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Thu, 7 Nov 2013 19:16:40 +0000 (20:16 +0100)]
Bug 9807 : Make it possible to view a basket group without reopening it
This patch make possible to view an individual closed basket group
without reopening it.
- It adds a new "View" button on closed basket group list
- It creates a view for closed basket groups, with 3 buttons (reopen,
print, export)
- It adds a "delete" button on standard "edit" view (for open
basket groups)
To test :
1/ regression test :
- create some empty basket groups
- create some basket groups by closing baskets
- in the list of basket groups closed and opened, check you can use
the buttons that existed before the patch (close and print, delete,
export, print, reopen)
- click on "Edit" to edit a opened basket group : check everything is
like before :
-- change the billing and delivery places,
-- add a note,
-- put some new baskets in the bg,
-- remove baskets from it
-- save it without checking "close" box => it should be saved but kept
open
-- edit it again, and make other some changes (define a freetext
delivery place for example)
-- save it with checking "close" => it should be saved but closed
2/ new feature test
- click on "view" button on top right column of some closed basket group
- check all the displayed informations are correct (places, free place,
note, list of baskets)
- check you can not change anything
- click on "print" button => check a pdf is created
- click on "export" button => check a csv is created
- click on "reopen" button => you should stay on the same basket group, but
it is now open and you can make some changes
- go back to the basket group list of the vendor. Check the reopened bg
is in "open" tab
- click on "edit"
- click on new "delete" button => the bg should be deleted, and you are
redirected to the bg list of the vendor.
Signed-off-by: cedric.vita@dracenie.com <cedric.vita@dracenie.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, t and xt. Works as advertised.
Fridolyn SOMERS [Thu, 7 Mar 2013 15:02:55 +0000 (16:02 +0100)]
Bug 7518: certain searches with quotation marks don't work
Under certain circumstance, a search term without quotation marks
returns the expected results while the same search with a
double quote embedded in it would fail.
Koha should ignore the quotation marks and return results anyway.
This appears when QueryWeightFields syspref is activated (and
QueryAutoTruncate is off), as field weighting builds a complex CCL
query using double quotes around search words. This patch simply
replaces double quotes in search words by a space.
Test plan :
- Set QueryAutoTruncate off (you may also need to set QueryFuzzy to off)
- Set QueryWeightFields off
- Perform a serch on two words where you have results, like : centre "ville
=> you get results
- Set QueryWeightFields on
- Perform same serch
=> you get the same results
Signed-off-by: Leila <koha.aixmarseille@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Tue, 17 Dec 2013 16:32:09 +0000 (16:32 +0000)]
Bug 7518: regression test double-quote in search operand
Under certain circumstances, namely where QueryParser is off,
QueryWeightFields is on, and QueryFuzzy and QueryAutoTruncate are
off, a search with a double-quote embedded in it can fail: for
example
web application
would return results where
web "application
does not.
This patch adds an automated regression test.
To test:
[1] Apply this patch and run prove -v t/db_dependent/Search.t;
two tests should fail.
[2] After applying the main patch that fixes the bug, the
prove -v t/db_dependent/Search.t should succeed.
Fridolyn SOMERS [Thu, 14 Nov 2013 13:29:51 +0000 (14:29 +0100)]
Bug 11249: Add Db indexes on borrowers names
The borrowers search is by default on columns surname, firstname,
othernames and cardnumber.
(See C4::Members::_express_member_find).
Adding DB indexes will really increase the query speed.
This patch adds DB indexes on surname, firstname, othernames (cardnumber
has already an index).
Those indexes must be defined with a size because columns are mediumtext.
Test plan :
Test with mysql client :
mysql> explain select * from borrowers where surname like 'A%';
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
| 1 | SIMPLE | borrowers | range | surname_idx | surname_idx | 767 | NULL | 395 | Using where |
+----+-------------+-----------+-------+---------------+-------------+---------+------+------+-------------+
=> key show the index is used
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, changes from updatedatabase and in kohastructure match.
I think deletedborrowers can be left out, as it's not queried when doing
patron searches. Patron deletes still work as expected.
Bug 7934: generate separate PO files for help pages
This patch modifies LangInstaller.pm to enable separation
of translation for Staff UI and Staff Help files.
It's a move that make sense, Help strings accounts for
44% of total word count for Staff, and as stated on
Comment #1, it could enable a different workflow on
translation work.
It's more a hack than an elegant solution, but it works.
Feel free to suggest another approach.
To test:
We need to test complete functionality, i.e. create and update
translation files and install translation, and verify that no
string is missing.
1) Before applying the patch, we need some data from staff file.
Pick your language, say de_DE, and
Only results came from help-top and bottom, and a few "help" on staff strings
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan. Checked various pages in OPAC,
staff and intranet, translation was ok.
Passes QA script and tests.
Frédéric Demians [Tue, 26 Nov 2013 09:16:41 +0000 (10:16 +0100)]
Bug 11277: fix errors with search facet links in Bootstrap theme
This patch fixes the following rwo errors:
1. When selecting 'show more' above a facet, the advanced search page
is displayed.
2. When restricting search on a library facet, all the biblio records
of this library are returned.
The patch fixes the way URL are encoded with TT filter. See:
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works nicely. Tests done:
- 'More' link on facets redirects to advanced search before applying
the patch. After appyling the link works correctly.
- In my tests, the facet links themselves worked nicely, limiting the
search as expected.
- Availability search works ok for me with patch applied.
- Also made sure to click on some links containing diacritcts (German
umlauts).
Kyle M Hall [Tue, 27 Aug 2013 17:14:12 +0000 (13:14 -0400)]
Bug 10626: (follow-up) replace another use of KohaBranchName
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
Make sure
- independentbranches is turned on
- Your user doesn't have superlibrarian permission
Then
- Try to check out an item with home and holding branch !=
logged in branch
Kyle M Hall [Tue, 23 Jul 2013 13:52:08 +0000 (09:52 -0400)]
Bug 10626 - Remove doubled up TT plugins - Merge KohaBranchName and Branches
Looking at the TT plugin directory I notice we have some plugins that
seem to do the same thing:
KohaBranchName.pm
Branches.pm
This patch drops KohaBranchName in favor of Branches
Test Plan:
1) Apply this patch
2) View a basket group, note the branch name is displayed
3) View a subscription's details, note the branch name is displayed
4) View suggestions, note the branch names are displayed
5) Return an item that needs transfered, note the branch name is displayed
6) Run 'prove t/db_dependent/Koha_template_plugin_Branches.t'
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested with a branch name with umlauts.
Galen Charlton [Fri, 13 Dec 2013 23:42:26 +0000 (23:42 +0000)]
Bug 8230: (follow-up) repair regression on order search
This patch repairs a regression introduced by the main
patch where it became impossible to search for cancelled
orders from the advanced order search form.
This patch also tweaks the wording on the order status
drop-down on the order search form to clarify that the
default status filter is orders that have any status
except cancelled.
To test:
[1] Before applying this patch, perform an advanced
order search (acqui/histsearch.pl) for orders
with status cancelled. Observe that no hits are returned.
[2] Apply the patch and run the search again. This time,
the cancelled orders should be returned.
Galen Charlton [Fri, 13 Dec 2013 23:04:59 +0000 (23:04 +0000)]
Bug 8230: (follow-up) don't link to basket unless user has appropriate permissions
With this patch, the basket number on the bib details page is linked
to the basket management page only if the staff user has the appropriate
permissions.
To test:
[1] Log in as a user with the acquisition/order_manage permission.
Bring up a bib record that is attached to an order and verify
that the basket number is an active link.
[2] Log in as a user that doesn't have the acquisition/order_manage
permission. Verify that the basket number displayed on the bib
details page is not a hyperlink.
Jonathan Druart [Fri, 18 Oct 2013 13:05:11 +0000 (15:05 +0200)]
Bug 8230: (follow-up) reflect the fact that order statuses are now alphabetic codes
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised. No regressions found.
Jonathan Druart [Wed, 18 Sep 2013 12:30:05 +0000 (14:30 +0200)]
Bug 8230: Display acquisition details on the catalogue detail page
This patch adds a new tab "Acquitition details" on the catalogue detail
page. It provides a list of order made for this biblio.
New system preference:
AcquisitionDetails: Hide/Show the new tab. The default for
new and upgraded installations is to display the new tab.
Test plan:
1/ Apply the patch.
2/ Select the "placing an order" value for the AcqCreateItem pref.
3/ Create a new order with X items.
4/ Go on the catalogue detail page for the selected biblio.
5/ Click on the "Acquisition details" tab and check that your order is
displayed. Itemnumbers are present in the last column. Check that links
are not broken.
6/ Close your basket.
7/ Status become "Ordered"
8/ Receive X-1 items.
9/ Come back on the catalogue detail page. There are 2 orders: 1
complete and 1 partial. The complete one has a receive date.
10/ Receive the last item.
11/ Now you have 2 orders with a complete status.
12/ Cancel the last receipt.
13/ You have 1 ordered and 1 complete (2 items).
14/ Cancel the first receipt.
15/ You have 1 ordered (3 items).
16/ Delete your order
17/ You have 1 deleted order.
18/ Switch the AcqCreateItem pref to "receiving an order"
19/ Do again steps 3 to 17.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This dependency is used in load testing (misc/load_testing/*)
Test plan:
Check if you see the dependency listed on About/Perl modules.
Verify if the version information is correct.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Fri, 6 Dec 2013 10:13:41 +0000 (11:13 +0100)]
Bug 11124: QA Follow-up resolving a warning and three typos
Resolves warning on uninitialized author in split on line 128.
Just adds the same behavior for title on line 129 for completeness.
Fixes typo on occurrences and two other minor typos.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2/
perl misc/load_testing/benchmark_staff.pl --steps=1
--url=http://admin.koha.local/cgi-bin/koha/
--password="root" --user="root"
should produce:
Authentication successful
You cannot use the database administrator account to launch this script
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 15 Nov 2013 10:10:04 +0000 (11:10 +0100)]
Bug 11255: allow "relevance ascending" as a sort option
This patch fixes a problem where if a staff member sets the
*defaultSortField/*defaultSortOrder system preferences to relevance
ascending while QueryParser is enabled, default keyword search
would break -- the query parser config did not declare relevance asc
as a possible "modifier".
Note that setting the sort order to relevance ascending does not
actually make catalog search return results with the least relevant
records showing up first; Zebra does not support such a mode. In other
words, relevance ascending acts exactly the same as relevance descending.
Test plan:
0/ Create some biblio with "history" in the title and
ensure that the QueryParser system preference is enabled.
1/ Define prefs defaultSortField = relevance and defaultSortOrder = asc
2/ Search "history" on the staff interface
3/ Note that no result is returned.
4/ Apply the patch
5/ Verify the queryparser config file in use takes the modification into
account (see the queryparser_config value in your $KOHA_CONF file).
6/ Relaunch the search and verify results are returned
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Wed, 16 Oct 2013 15:31:04 +0000 (17:31 +0200)]
Bug 9224: Make acqui/finishreceive.pl Plack-compatible
Under Plack/mod_perl wrapping, sub update_item() will become a closure,
so after the 1st run it will retain its own private instances of the
following variables: $booksellerid, $datereceived, $unitprice, $rrp,
$biblionumber.
I.e., in case update_item() gets invoked 2nd+ time (inside
the same process, but for different-subsequent receives) it may
incorrectly flag the (old, wrong) biblionumber for Zebra reindexing,
and erronously modify the current item[s] with the previously
used (wrong) values.
This simple patch should make acqui/finishreceive.pl Plack-compatible.
Test plan:
Test patched acqui/finishreceive.pl script (create and receive some
orders w/ items, etc.). Ensure items are gettting added and/or modified
correctly during receiving process.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised, no regressions found.
This patch adds a plugin for field 100 of UNIMARC
authorities.
To test on a UNIMARC site:
1) Apply the patch
2) Edit some authority framework, field 100
3) Link subfield 'a' to unimarc_field_100_authorities.pl
plugin, save
4) Edit or add auth record, click on '...' to bring plugin
5) Modify field 100a
6) Save record
Thanks to Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> for
converting Vitor's original patch to a Git patch and doing
some tidying.
Zeno Tajoli [Wed, 30 Oct 2013 18:36:41 +0000 (19:36 +0100)]
Bug 11174: fix OPAC search links built from authority 5xx fields
In the templates opac-authoritiessearchresultlist of prog and
bootstrap the incorrect parameter 'valuec' is changed to 'value'
To test:
1) Insert an authority record with a 5xx field (on MARC21 or UNIMARC)
2) Index the record
3) Search for the record in using OPAC authorities search.
4) Click one of the "see also" links built from the 5xx field, the link
doesn't work
5) Apply the patch
6) Close the browser
7) Open the opac and select the english interface
8) Redo the search
9) Now the link works
10) To use the patch in others languages you need to regenerate the
templates.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with bootstrap.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Following commit remove the use to valuec:
commit 31f41e2c1db9d8dca82e0249050acb8f906c8164
Bug 8206: Specify index in OPAC authority search
Galen Charlton [Tue, 10 Dec 2013 20:20:37 +0000 (20:20 +0000)]
Bug 11009: (follow-up) tweak wording and remove potential log noise
This patch makes the message that is displayed when attempting to
view circ history for the anonymous patron more informative. It
also removes a potential source of log noise if the AnonymousPatron
system preference happens to be set to a blank value.
Fridolyn SOMERS [Tue, 8 Oct 2013 07:34:42 +0000 (09:34 +0200)]
Bug 11009: Do not display circulation history of anonymous patron
When using an anonymous patron to anonymise issues history, this patron
may have a huge number of old issues. In this case, trying to display
the reading history of this patron will perform a huge SQL query.
It is not useful to have the reading history of this anonymous patron.
This patch adds an alert instead of old issues when displaying reading
records of anonymous patron.
Test plan :
- Set syspref AnonymousPatron to 0.
- Select a borrower with old issues. For example 123.
- Look at its reading records page : members/readingrec.pl
=> Old issues are displayed in a datatable
- Set syspref AnonymousPatron with this borrower number. For example 123.
- Look at its reading records page
=> Old issues are not displayed and an alert is displayed
- Using SQL query, remove old issues of this borrower :
DELETE FROM old_issues WHERE borrowernumber=123.
- Look at its reading records page
=> A message is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works as advertised and seems like a reasonable thing to do. I
suspect that someone will object... Perhaps that person will implement a
solution which uses an AJAX DataTable.
Galen Charlton [Tue, 10 Dec 2013 18:21:09 +0000 (18:21 +0000)]
Bug 11112: (follow-up) add FIXME
The caching introduced by the main patch is not ideal
as it won't work correctly if a persistance engine is used.
However, I have good reason to expect that bug 8089 will
be worked on (because I'm going to do it) so that Koha::Cache
can be used for this prior to the release of 3.16.
This patch ensures that the package-level cache is updated
when add_holiday() is used. Note that except for the test
case added by this patch, there doesn't seem to be anything
that actually calls ->add_holiday(); it may be better to remove it.
Jonathan Druart [Wed, 16 Oct 2013 13:36:30 +0000 (15:36 +0200)]
Bug 11112: Koha::Calendar needs some caching
Each time a Koha::Calendar object is created, its constructor retrieves
all holidays from the database and create a DateTime::Set object with
all holidays.
[RM note: I've observed that the time it takes DateTime::Set to be
initialized with a set of dates increases faster than linearly with
the number of dates. I think this, more than just retrieving a bunch
of holidays from the database, is what is most expensive.]
In one of our customer's DB, there are 11085 special_holidays and 598
repeatable_holidays. When a loan is returned, there are 3 calls to
Koha::Calendar->new.
This patch adds caching of the holiday list via package-level variables
as well as lazy fetching of the holidays. (RM note: this means that if
a persistance engine is in use, updates to the holiday list will not
be reflected during checkout. I'm allowing this breakage for now on
the plan that bug 8089 will be fixed soon and we can switch to using
Koha::Cache).
Nytprof benchmarks (on a 3.8.x branch):
In DateTime::Set->from_datetimes:
3 times (5.49ms+4.90s) by Koha::Calendar::_init at line 80 of Koha/Calendar.pm, avg 1.63s/call
on a total of 7.67s (of 10.2s), executing 6353333 statements and 3031273 subroutine calls in 147 source files and 36 string evals.
for the circulation/return.pl page.
Comparing the access_log:
Without the patch:
checkout: time=2759838
checkin: time=1832751
Without the patch and with overdues:
checkout: time=1086727 + time=1144706
checkin: time=3928854 (x2)
With the patch and overdues:
checkout: time=1077839 + time=1060886
checkin: time=2420898
Test plan:
- checkout an item with a return date < today
- checkin the item and verify the suspension period is well calculated
(depending on the holidays).
- prove t/db_dependent/Holidays.t
- t/Calendar.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Thu, 10 Oct 2013 17:06:14 +0000 (18:06 +0100)]
Bug 11032: Check a valid MARC::Record passed to Biblio
Intermittently problems in the calling environment
cause a C4::Biblio routine to be called with an undefined
MARC::Record object. This results in the process
dying and returning to the end user a low level
message such as 'cannot call method x on an undefined
object'.
For exported subroutines taking a MARC::Record object,
check that object is defined otherwise return a logical
return value and log a stack trace to the error log.
A couple of cases were checking but dying, this may have
unwelcome results in a persistent environment so croak has
been downgraded to carp
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds lots of checks for $record in various places, should
not affect behaviour.
Passed all tests and QA script, including new unit tests.
Tested adding and saving a new record.
Also tested detail and result pages without XSLT.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 14 Nov 2013 10:31:23 +0000 (11:31 +0100)]
Bug 10605: fix encoding issue on basket email (INTRANET)
Same fix for the staff interface.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Both patches tested with English and German, diacritics
now appear correctly if UTF-8 is selected as encoding.
Passes all tests and QA script.
Jonathan Druart [Thu, 14 Nov 2013 11:17:38 +0000 (12:17 +0100)]
Bug 10605: fix encoding issue in basket email (OPAC)
There is an encoding issue on the received mail.
Here, we have to keep the encode_qp in order not to break links (= is a
special char for email https://en.wikipedia.org/wiki/MIME#Encoded-Word).
Fridolyn SOMERS [Fri, 30 Aug 2013 09:41:26 +0000 (11:41 +0200)]
Bug 10808: (follow-up) reformat auth_finder.pl
Perltidy and some format changes.
Most important : call to get_template_and_user must be at begining
of script because it checks authentification.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
- Tested various searches, selections now remain after
submitting the search form.
Regression testing:
- Clearing the authority from the record still works.
- Creating a new authority from the plugin page
still works.
- Autocomplete of entries still works.
Fridolyn SOMERS [Fri, 30 Aug 2013 08:54:00 +0000 (10:54 +0200)]
Bug 10808: make authority search form retain drop-down selections
When cataloging a field defined with a thesaurus, an authority search
popup is displayed with a search from. Once operators, values and sort
selected in this form the search can be performed. The bug is that the
values entered are kept but not the selected operators and sort.
The same bug was existing in authorities module, solved by Bug 8692.
This patch corrects the bug.
Also uses in 'sort by' options the same text as search in authorities
module : Heading A-Z (default), Heading Z-A, None.
Also removes duplicated code in auth_finder.pl :
value_mainstr => $query->param('value_mainstr') || "", ...
Test plan :
- Create a new biblio with a framework containing a field linked to a
thesaurus. For example : 600
- Click on small icon of main entry. For example : 600$a
=> You get a search form with all operators to "contains" and sort by
"Heading A-Z"
- Enter a value in each text box and perform search
=> You get a search form with values in text boxes and all operators
to "contains"
- Select "starts with" in all operator comboboxes and perform search
=> You get a search form with all operators to "starts with"
- Select "is exactly" in all operator comboboxes and perform search
=> You get a search form with all operators to "is exactly"
- Select "Heading Z-A" in sort by and perform search
=> You get a search form with "Heading Z-A" in sort by
- Select "None" in sort by and perform search
=> You get a search form with "None" in sort by
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: With both patches applied no koha-qa errors
Test
1) Original behavior is whatever selection you do before patch,
search form returns to default options
2) After patch, selection remains
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, further comments on second patch.
Owen Leonard [Thu, 15 Aug 2013 14:06:29 +0000 (10:06 -0400)]
Bug 10661: format mandatory item fields the same on all forms
Mandatory item fields are not indicated the same way in all places. This
patch corrects two places where required fields were shown in bold
rather than using the standard "required" class: When adding an order
from a staged file and when adding an item for a new issue of a serial.
This patch also normalizes the text input size on item entry forms: In
some places it was 50, others 67. I have changed the latter to 50.
Unrelated changes: Added $KohaDates formatting of date and time and
corrected capitalization on a heading on the add order from staged file
page.
It would be nice to be able to use the same method for displaying the
item form as we use on neworderentry.tt -- pulling in the form from a
separate include. However that system is designed for handling multiple
items and would need to be adapted for these cases.
To test, you must have a staged file from which to add an order. Open an
existing basket or create a new one and choose to add an order "From a
staged file." Choose a staged file from which to order. The item entry
form under the "Import all" heading should show required fields in red.
To test in serials: Begin the process for receiving an item from an
existing subscription. On the serials-edit page, find the "Click to add
item" links and click to open the item edit forms. There should be one
under the numbered issue and the supplemental issue forms. In both cases
the item edit screen should show the mandatory item fields in red.
Confirm that the cataloging add item form looks correct and works
correctly.
Revision: Left out the "required" note which should appear after each
required field.
Jonathan Druart [Wed, 13 Nov 2013 10:33:05 +0000 (11:33 +0100)]
Bug 8683: ensure clear button clears all item fields on order form
The clear js function parses input text, but input filled to a plugin
does not contain the type attribute.
Test plan:
- fill the barcode field to the barcode plugin
- go on the new order page
- verify the barcode plugin works as before
- verify the clear link clears the barcode field and all others fields.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template change only.
Barcode and date acquired are now also cleared with the
'clear' link.
But: it only works when you enter a barcode manually currently,
because the AutoBarcode functionality is broken on master (bug 11273).
If you select an index in the search dropdown and then enter in a QP
query starting with the field, Koha will prepend the index you do not
want to use at the beginning of the search, resulting in a search that
probably does not match what you were hoping for.
To test:
1) Select an index in the search dropdown in the OPAC. Author is fine.
2) Enter a search term using manually entered indexes. For example:
ti:cat in the hat
3) Note that the search fails.
4) Apply patch.
5) Repeat steps 1 and 2.
6) Note that the search succeeds.
7) Sign off.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Srdjan [Fri, 23 Aug 2013 07:59:17 +0000 (19:59 +1200)]
bug_10781: Remove C4::ILSDI::Utility
This patch removes C4::ILSDI::Utility on the basis
that one of its routines (BorrowerExists) was not used
and that the other routine can be (and is) moved to
C4/ILSDI/Services.pm.
Test:
This should be a noop. Regression testing required:
/cgi-bin/koha/ilsdi.pl functioanality, in particuler:
GetAvailability - ?service=Describe&verb=GetAvailability
AuthenticatePatron - ?service=Describe&verb=AuthenticatePatron
ILS-DI syspref must be turned on
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Fri, 22 Nov 2013 22:04:00 +0000 (11:04 +1300)]
Bug 11290: fix display of patron home page for certain translations
To test
1) In a fresh Koha, generate translation into XX
2) Select XX for the staff interface (i.e. enable it, and choose it)
3) Go to the Patrons page
4) Everything looks fine
5) In the admin page, create a patron category with any non-ASCII
character.
6) Go back to the Patrons page, everything is broken
7) Apply patch
8) regenerate translation
9) Go back to the Patrons page, everything looks fine
10) Switch to english it still looks fine
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tried with ru-RU and fixes the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Problem is also visible on untranslated templates changing
one of the sample category descriptions to include diacritics.
[RM note: I wasn't able to reproduce this on an unstranslated
template -- I tried using Arabic, Cyrllic, and Spanish characters]
Jonathan Druart [Tue, 12 Nov 2013 14:31:56 +0000 (15:31 +0100)]
Bug 11225: remove \n from some strings to be translated
Some strings in the serials module contain linebreaks \n that cause
problems in translation.
Test plan:
- Update your po file
- Verify that strings in serials/subscription-add.tt and
serials/subscription-numberpatterns.tt are present and don't contain
"\n" character.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only change, passes all tests and QA script.
Updated po files now contain only the strings and no line breaks.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No regressions found. Passes koha-qa.pl and xt.
Galen Charlton [Tue, 3 Dec 2013 17:06:48 +0000 (17:06 +0000)]
Bug 11333: use jQuery validator plugin for CSV profiles forms
This patch adds the use of the jQuery validator plugin for
the two forms (new and edit) on the CSV profiles page. Doing
this standardizes messages that gets displayed on validation
errors.
This patch, in the process, fixes a bug where if a page has
more than one validated form, only the first such form would
get the validator plugin applied to it -- it looks like $.validate()
does not do implicit iteration.
To test:
[1] Apply the patch, then go to Tools | CSV profiles.
[2] Create a new profile, but leave the name and the MARC/SQL
fields blank. When you click the submit button, the form
should not be submitted; instead, text will be displayed
to the right of each input that lacks required input.
[3] As above, but change the profile type and verify that the form
is not submitted unless all of the required fields are filled in.
[4] Edit an existing form, then empty the MARC/SQL field. Try
submitting the form; it should refuse to submit the form
and display text saying that the field is required.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs, works nicely and as described.
Jonathan Druart [Tue, 19 Nov 2013 10:27:52 +0000 (11:27 +0100)]
Bug 11265: ensure current locale is selected when editing a subscription
Test plan:
0/ you have to have some locales defined, run dpkg-reconfigure locales
to configure locales
1/ edit a subscription (or add a new one) and select a locale
2/ save
3/ edit again and verify the locale value is selected
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Tested creating a suscription, selecting locale (have many) and saving.
When editing suscription:
1) Without patch locale value is not showed on page, empty value
2) With patch correct value is displayed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Template change only.
Works as expected - saved locale is now shown on editing the
subscription and will not be deleted upon saving.
Jonathan Druart [Wed, 23 Oct 2013 10:40:30 +0000 (12:40 +0200)]
Bug 2546: make description of standard fine types translatable
The descriptions for fines are stored in English in the DB
(accountlines.description). So they are not translatable.
This patch removes the descriptions automatically added and generates
the string in the template.
Test plan:
1/ Execute the updatedatabase entry.
2/ Verify in the following pages the description is consistent:
- members/pay.pl?borrowernumber=XXXX
- members/boraccount.pl?borrowernumber=XXXX
- opac-account.pl
3/ Launch the translate script and update the po files in order to
translate the new strings.
4/ Verify the strings are translated in the interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Corrected few typos in the commit message.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Sun, 20 Oct 2013 15:12:29 +0000 (08:12 -0700)]
Bug 2310: display tooltips explaining why patron menu items are disabled
With some staff client menus options are displayed as disabled when the
logged in user doesn't have permission to perform that function. This
patch adds Bootstrap tooltips to patron menu items with text explaining
why they are disabled.
To test, log in as a user who lacks permission to modify patrons or set
permissions. Open a patron record in circulation or patrons. Hovering
over renew, delete, and set permissions links (in the patron toolbar
"More" menu) should trigger a tooltip with a brief explanation.
Test the "Update child to adult patron" link by viewing an adult patron.
A separate patch will address catalog menu items.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
New tooltip texts are translatable, patch passes all tests
and QA script.
Tested according to test plan in Chromium and Firefox.
Fridolyn SOMERS [Mon, 21 Oct 2013 10:13:17 +0000 (12:13 +0200)]
Bug 11091: (follow-up) perltidy on serials/subscription-bib-search.pl
Signed-off-by: David Noe <drnoe@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Mon, 21 Oct 2013 09:54:16 +0000 (11:54 +0200)]
Bug 11091: revamp search limit options for new subscription bib search form
When creating a new subscription, you can click on "Search for Bilbio"
to search into catalog.
A popup opens with a text field for search terms and a combo-box to
limit search. This combo-box uses the syspref AdvancedSearchTypes to
know what list of values display.
The bug is that the code acts as if AdvancedSearchTypes has always one
value, but since Bug 7031, this syspref can have several values
(item types, collection codes and locations).
This patch removes the use of AdvancedSearchTypes syspref and defines
search form with 2 limits: item types and collection codes (from
authorised values CCODE).
One or both of this information can be on biblio. [RM note: this isn't a
true statement for the default configuration used by MARC21 libraries.]
Searching by location seems to be useless because this information is always
on item. If CCODE authorised value does not exist or is empty, the collection
code filter is not displayed.
Test plan :
- Check CCODE authorised value exists with some values
- Choose a biblio indexed with both itemtype and ccode indexes
- Go to Serials module and click on "New subscription"
- In form, click on "Search for Biblio"
=> The popup "serials/subscription-bib-search.pl" appears with two limits
- Enter a word of biblio title, select its item type and select its collection code
- Click on "Search"
=> You get the biblio
Signed-off-by: David Noe <drnoe@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While I am not sure how useful the collection code is for most libraries, where this
is an item level value, this fixes a broken feature and works as described.
Passes all tests and QA script.
Jonathan Druart [Tue, 22 Oct 2013 12:05:48 +0000 (14:05 +0200)]
Bug 11111: display the basket group name on the parcel page
Test plan:
Go on acqui/parcel.pl?invoiceid=XX page and verify the basket group name
is displayed into the 2nd column of the pending orders and already
received tables.
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed basketgroup to basket group to match spelling on other
pages.
Works as described, passes tests and QA script.
Srdjan [Fri, 1 Nov 2013 08:42:45 +0000 (21:42 +1300)]
Bug 11077: Correct more warnings in C4/Auth.pm
This gets rid of some more warnings.
It also corrects a noisy ne condition.
$userid = $retuserid if ( $retuserid ne '');
became
$userid = $retuserid if ( $retuserid );
It also integrates Srdjan Jankovic's patch with Petter Goksoyrsen's
patch, while correcting the problems found.
This includes:
my $q_userid = $query->param('userid') // '';
along with:
my $s_userid = '';
and:
my $s_userid = $session->param('id') // '';
Indentation does not reflect actual scoping.
A missing system preference would have triggered a ubiquitous
undef compare check failure message. This makes the flooding
message more useful, so as to help correct it.
The change to accomplish this was:
my $pki_field = C4::Context->preference('AllowPKIAuth');
if (!defined($pki_field)) {
print STDERR "Error: Missing AllowPKIAuth System Preference!\n";
$pki_field = 'None';
}
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11077: remove uninitialized value $pki_field warning
During login at the Staff interface you get warnings in the logs
regarding an uninitialized value for the $pki_field variable.
To test:
- tail -f /path/to/your-intranet-logs
- Point your browser to your staff login page
- Login
- Three warnings are showed
- Apply the patch
- Log out
- Log in
- No new warnings, and you can still log in.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Followed test plan; it works as advertised.
Also works when I deleted AllowPKIAuth system pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Wed, 4 Dec 2013 21:09:20 +0000 (10:09 +1300)]
Bug 11341: fix XSS bug in opac-search.pl (facets)
This patch fixes the prog theme; the bootstrap theme already
does the necessary filtering.
To test
1/ Craft a url like
cgi-bin/koha/opac-search.pl?idx=kw&q=fish&offset=20" onmouseover%3dprompt(994000) bad%3d"
(the search must return enough results to have a show more link in the facets)
2/ Check the source, or mouseover the Show more links in the facets
Notice the code is executable
3/ Apply patch - notice it is no longer executable
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some fields are required on editing/adding CSV profiles. This
patch adds HTML5 validation so that required fields must be
filled in before the form is submitted.
Test plan:
- add a new CSV profile (tools/csv-profiles.pl) without any value.
- save => error on empty fields.
- fill the "marc" content, select type="sql", fill the CSV name input.
- save => error on sql content field.
- fill the sql content
- save => the CSV profile is saved.
- retry for the edit form.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: On top of both patches for Bug 10853
Works very well, now we get an alert with empty field
Saves correctly MARC and SQL profiles
Solved minor conflict introduced by tab followup on Bug 10853
Again small tab errors corrected in followup
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, looks a bit 'non standard' for Koha,
but improves usability of the form.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To old plugin prevents the upgrade to the latest jquery. By replacing
with openjs' shortcut.js, we have now one less hurdle in upgrading
Koha to latest.
Changes:
- removed jquery.hotkeys.min.js
- added shortcut.js
- modified the related includes (doc-head-close.inc and help-top.inc)
- modified the calls in staff-global.js
Regression test:
1) apply the patch
2) in the intranet, test the shortcuts alt-q, alt-r, alt-u.
These are the only affected functionalities. There is no new functionality.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Tested existing
shortcuts for the search bar tabs on various circulation
related pages.
This uses a Javascript under BSD license, I wonder if it
should be listed in the About>licenses section that we
are using it. As Yui is also BSD I assume the license is
compatible.
+/**
+ * http://www.openjs.com/scripts/events/keyboard_shortcuts/
+ * Version : 2.01.B
+ * By Binny V A
+ * License : BSD
+ */
Chris Cormack [Mon, 2 Dec 2013 23:01:23 +0000 (12:01 +1300)]
Bug 11322: rscrub bad data before storing suggestions in the DB
1/ In the public interface, add a suggestion containing html
2/ Save, notice the html is rendered (or if you have the other patches
is displayed)
3/ Apply this paget
4/ Add another suggestion
5/ Notice the html is stripped
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 2 Dec 2013 22:46:24 +0000 (11:46 +1300)]
Bug 11322: fix XSS bug in purchase suggestions - OPAC
1/ Add a suggestion in the opac, with lots of html
2/ View that suggestion in the OPAC, note the html is rendering
3/ Apply the patch
4/ Test again, in prog and bootstrap, no more rendered html
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 2 Dec 2013 22:34:48 +0000 (11:34 +1300)]
Bug 11322: fix XSS bug in purchase suggestions pages
To test
1/ Switch on purchase suggestions
2/ On the public interface (OPAC) add a suggestion, put html in every
field
3/ In the staff interface go to the suggestions page
/cgi-bin/koha/suggestion/suggestion.pl
4/ Notice the html is rendered
5/ Click on a suggestion, notice the html is rendered on the show page
also
6/ Apply the patch, check these two pages again, html should now be
escaped
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, thx Chris!
Mathieu Saby [Fri, 18 Oct 2013 09:44:39 +0000 (11:44 +0200)]
Bug 7791: (follow-up) add warning after deletion if some records were not deleted
This followup add some warnings after deletion if some items were not
deleted.
4 types of messages are possible :
- x item(s) attached.
- x subscription(s) attached.
- x order(s) attached.
- Unknown error.
To test :
test a
1. create a basket with
- an order using a record A which has already an item, which is used in
a subscription, and in other order (in an other basket)
- an order using a record B used nowhere elese
2. click on "Delete basket"
3. choose button "Delete basket, orders and records"
4. you should see a page anouncing basket deletion, and that record A was
not deleted because of its item, subscription and order.
5. check the link around the title of record B takes you to the record
6. check the link under the warning box ("Click here to go back to
booksellers page") takes you to booksellers page
5. check record B is deleted
test b
1. suppress the subscription linked with record A
2. create an other basket using record A
3. delete the basket on the same way as for test a
4. you should see a page anouncing basket deletion, and that record A was
not deleted because of its item and order
test c
1. suppress the item attached under record A
2. create an other basket using record A
3. delete the basket on the same way as for test a
4. you should see a page anouncing basket deletion, and that record A
was not deleted because of its orderBug 7791 Followup: add warning
after deletion if some records were not deleted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7791: (follow-up) tidy up some cruft in the main patch
This patch
- delete warns
- add a missing }
- add a condition in template of avoiding asking to delete orders or
records if the basket is empty
To test :
1. Make the same tests as defined in test plan of main patch. It should
behave the same way
2. Try to delete a basket with no records inside. You will only have a
"Delete basket" button, with fewer warnings
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7791: add ability to delete records when deleting a basket
Currently, when a basket is deleted, all the orders are deleted (there
is a foreign key in aqorders table on basketno).
This could be dangerous, and there is no warning.
After the deletion, unused biblios are left in the catalogue.
This patch
- adds a more detailed message describing the consequences of deletion
- give the choice of also deleting biblio records if possible
To test :
Test A :
1. create a basket with 4 orders:
- an order from a new record A
- an order from a record B which has already an item
- an order from a record C used in a subscription
- an order from a record D used in an other order
2. note the biblionumbers of the records used (or open them in other
tabs in your browser)
3. click on "Delete basket"
4. choose button "Delete basket and orders"
5. check the catalogue : records A,B,C,D should still be there
Test B:
1. create a basket with 4 orders:
- an order from a new record A
- an order from a record B which has already an item
- an order from a record C used in a subscription
- an order from a record D used in an other order
2. note the biblionumbers of the records used (or open them in other
tabs in your browser)
3. click on "Delete basket"
4. choose button "Delete basket, orders and records"
5. check the catalogue : records B,C,D should still be there. Record A
should be deleted
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 21 Aug 2013 14:53:20 +0000 (10:53 -0400)]
Bug 2693: add ability to filter by reviewer name on tag review page
If you want to filter results on the tags management page by the
reviewer you have to know their borrowernumber. It would be better to be
able to search by name, but in the meantime this patch adds an
autocomplete widget to the form field so that you can do a name search
and populate the field with the borrowernumber.
To test you must have approved or rejected tags. From the tags review
page (tags/review.pl), view all, approved, or rejected tags. Type a name
in the "reviewer" form field in the left sidebar filter. You should get
an autocomplete dropdown with names matching your search. When you
select one the form field should be populated by the borrowernumber.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Patch works as described. I'm not sure whether or not it would be better
to be able to search by name, as that would involve either choosing
between names after applying the filter or showing any possible matches,
so this seems fine.
--
Owen and I did observe that we were able to cause AJAX errors while
using this autocomplete, but we are not 100% sure how we caused the error.
In my case, I was able to occasionally cause it by typing in a name
then backspacing rapidly. The ajaxError method is attached to every
element in the DOM (yikes) so it's tough to say what exactly is the
source of the error (which is signalled by a pop-up window that can be
cancelled).
The error is quite rare so I don't think it's necessarily a problem
for us.
One idea that Owen had was to remove the current error message, which
is very unhelpful and replace it with an error like "Something went
wrong. Try again."
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Tue, 12 Nov 2013 16:19:09 +0000 (17:19 +0100)]
Bug 11059: (follow-up) restore time in staged dates in addorderiso2709.tt
Follow-up patch to restore the display of time in
acqui/addorderiso2709.tt in staged date.
Simply uses an option of KohaDates TT plugin.
This time may be useful if there where several imports in the same day.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Lyon3 Team [Tue, 12 Nov 2013 19:32:34 +0000 (15:32 -0400)]
Bug 11059: fix date sorting of import batches in basket add form
This patch improves the sorting of staged import batches by date,
particularly when the dateformat system preference is set to anything
other than YYYY-MM-DD.
Adds title-string sorting type to enable this.
To test:
[1] Ensure that there are at least three staged
bib import batches, with upload timestamps such that
date sorting errors would be apparent.
[2] Set the dateformat system preference to either DD/MM/YYYY
or MM/DD/YYYY.
[3] Create a new basket in acquisitions, then chose to add
a new order line from a staged record batch.
[4] In the list of batches, click on the 'staged' column
heading to sort by date.
[5] Observe that dates are sorted in alphanumeric order, not date
order.
[6] Apply the patch and refresh. This time, dates should sort
correctly.
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Wed, 13 Nov 2013 20:55:24 +0000 (15:55 -0500)]
Bug 11242: fix opac-MARCdetail.pl display and warnings
This patch improves the public catalog MARC view display
of records that contain subfields that are not defined in
the framework used by the bib record.
To test:
(RM note: it may be easier to find or create a MARC record that
contains a subfield not present in the default framework, then
load it, rather than fiddle with the MARC frameworks in your
test database.)
BACK UP YOUR DATABASE!
1) Search for an item in OPAC
2) Open OPAC detail
3) Click 'MARC View' link
4) Look for something with multiple lines (e.g. 260 or 942)
5) In another tab, Go to staff client and log in
6) Go to the staff client URL similar to:
/cgi-bin/koha/catalogue/detail.pl?biblionumber=##### page
where ##### is the biblionumber.
7) Edit -> record
8) Note the framework used.
9) More -> Administration
10) MARC bibliographic frameworks
11) Click 'MARC structure' for the framework used by the item
shown in OPAC.
12) Find the tag (e.g. 260 or 942) and click 'Subfields'
13) Delete of the matching subfields (e.g. 260$b) shown in the
OPAC tab
14) Clear your opac error log.
15) Refresh OPAC tab. The tag subfields are split.
16) There are opac-MARCdetail.pl warnings.
17) Apply patch
18) Clear your opac error log.
19) Refresh OPAC tab. The tag subfields are no longer split strangely.
20) There are no opac-MARCdetail.pl warnings.
RESTORE YOUR DATABASE.
This also silences a series of warnings triggered by catching
undef hash references.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Srdjan [Fri, 1 Nov 2013 08:05:09 +0000 (21:05 +1300)]
Bug 11183: get rid of some log noise from the OPAC
To test in OPAC:
* With the OPAC System Preference EnableOpacSearchHistory set
to Keep, a simple search triggers the warning patched on
line 626 of opac-search.pl
* Selecting a search result item with no Collection Code
set triggers the warning patched on line 576 of opac-detail.pl
* Have an item with Collection Code. Check that the Collection
Code shows.
* Collection Code is set by editing an item in the staff client
(952$8)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7484: keep selected values when changing search type on authority search form
1) I'm on the "Search authorities" tab. I select an authority type,
then change the active tab. The type change is lost.
2) I'm on a tab and type a search pattern, then change tab, the string
is lost.
This behaviour is logical, given the fact that we're using tabs, but it
would be more practical to keep the typed informations when the user
changes the search mode.
This patch add a few JQuery code to synchronise inputs between all
tabbed authorities search forms.
Test plan :
- Go to Authorities home page : cgi-bin/koha/authorities/authorities-home.pl
- In toolbar, "Search main heading" is selected
- Change all inputs : authotity type, operator, term, and sort order
- Click on "Search all headings" tab
=> Inputs are the same has previous tab
- Click on "Keyword search" tab
=> Inputs are the same has previous tab
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Explicitly declare 2 new variables used.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, Firebug doesn't show any problems with
the Javascript.
Could be useful for other tabbed searches like the start page
as well.
Fridolyn SOMERS [Thu, 7 Nov 2013 09:22:49 +0000 (10:22 +0100)]
Bug 11214: improve create/edit routing list links in serial collection page
When a subscription has no routing list yet, the page
serials/subscription-detail.pl shows in left menu : "Create routing list".
In serials/serials-collection.pl page, the link in table is always
"Edit routing list", even when there is no routing list.
This patch adds a conditionnal link "Edit routing list"/"Create routing
list" into serials/serials-collection.pl page.
Test plan :
- Create a subscription no. 1 without routing list and a subscription
no. 2 with a routing list
- Go to serials/serials-collection.pl of subscription no. 1
=> You see "Create routing list" link
- Click on link
=> You see "Create routing list for"
- Go to serials/serials-collection.pl of subscription no. 2
=> You see "Edit routing list" link
- Click on link
=> You see "Edit routing list for ..."
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Functional and automated tests pass. Passes koha-qa.pl.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
With the patch applied the serial collection page shows the
right link depending on the existance of a routing list.
Jonathan Druart [Fri, 22 Nov 2013 09:42:42 +0000 (10:42 +0100)]
Bug 11286: fix bug preventing adding a new subfield to an authority framework
Bug 10602 introduces a bug when adding a new subfield to an authority
framework. A new parameter is added in a sql query but the placeholder
is missing.
Test plan:
- edit an authority framework
- add a new subfield
- save
- boom!
DBD::mysql::st execute failed: called with 16 bind variables when 15 are
needed at
/home/home/src/admin/auth_subfields_structure.pl line 454.
- apply the patch and try again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Tested trying to add subfield to 100, 2 for example.
Without patch silently fails (but error is logged)
With patch subfield creation or elimination is fine
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line fix for a bad bug. Confirmed the bug on master and
the fix. Passes all tests and QA script.
Jonathan Druart [Wed, 30 Oct 2013 14:48:10 +0000 (15:48 +0100)]
Bug 11171: Display basket group name on the supplier list page
Test plan:
Search supplier and verify the basket group column is filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
projects / koha.git / log
