Kyle M Hall [Thu, 8 Mar 2012 19:35:08 +0000 (14:35 -0500)]
Bug 7597 - Part 5 - Remove my from $branch, which was masking previous declaration
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Tue, 28 Feb 2012 14:34:59 +0000 (09:34 -0500)]
Bug 7597 - Part 3 - fines not recording the right info in the stats table
This commit fixes writeoff_all to write off only the amount outstanding
for each fine being written off, rather than the original amount owed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Tue, 28 Feb 2012 14:17:04 +0000 (09:17 -0500)]
Bug 7597 - Part 2 - move sub writeoff to C4::Accounts
Currently, the subroutine writeoff lives in pay.pl, which
is a violation of the Koha coding guidelines, as it writes
to the database. This commit restructures and moves writeoff
to C4::Accounts::WriteOff(), and modifies pay.pl to use it.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Tue, 28 Feb 2012 13:47:43 +0000 (08:47 -0500)]
Bug 7597 - Part 1 - fines not recording the right info in the stats table
Koha was writing off the value of accountlines.amount rather
than the value of accountlines.ammountoutstanding.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Magnus Enger [Mon, 5 Mar 2012 12:36:43 +0000 (13:36 +0100)]
Bug 7092 - Complete-subfield searches TraceCompleteSubfields syspref not working correctly
This patch adds a syspref UseICU for toggling between using "" and {} for
quoting in subject tracings. With normal Zebra indexing, "" must be used. With
ICU Zebra indexing, {} must be used.
This syspref interacts with TraceCompleteSubfields and TraceSubjectSubdivisions.
To test:
- marcflavour = MARC21
- make sure you have a record with a "complex subject", like
"Internet -- Law and legislation"
Toggle UseICU, TraceCompleteSubfields, and TraceSubjectSubdivisions and check
that you get the expected results for the clickable links in the OPAC detail
view:
TraceCompleteSubfields = Don't force
TraceSubjectSubdivisions = Don't include
UseICU = Not using
opac-search.pl?q=su:"Internet"
UseICU = Using
opac-search.pl?q=su:{Internet}
TraceCompleteSubfields = Force
TraceSubjectSubdivisions = Don't include
UseICU = Not using
opac-search.pl?q=su,complete-subfield:"Internet"
UseICU = Using
opac-search.pl?q=su,complete-subfield:{Internet}
TraceCompleteSubfields = Don't force
TraceSubjectSubdivisions = Include
UsingICU = Not using
opac-search.pl?q=(su:"Internet") and (su:"Law and legislation.")
UsingICU = Using
opac-search.pl?q=(su:{Internet}) and (su:{Law and legislation.})
TraceCompleteSubfields = Force
TraceSubjectSubdivisions = Include
UseICU = Not using
opac-search.pl?q=(su,complete-subfield:"Internet") and (su,complete-subfield:"Law and legislation.")
UseICU = Using
opac-search.pl?q=(su,complete-subfield:{Internet}) and (su,complete-subfield:{Law and legislation.})
Check that clicking on the generated links gives the expected search results,
but with normal and ICU indexing. (I have actually not tested this with ICU, so
doing that before signing off is crucial.)
UPDATE 2012-03-16:
Changed the name of the syspref from TracingQuotes to UseICU after a suggestion
from Paul P., to make it more generally useful.
I have used "Using/Not using" instead of "Use/Don't use" in the description of
the syspref, to reflect the fact that this syspref will not change how Zebra
does its indexing - it's just a way of telling Koha how the indexing is
actually done.
I have also set UseICU = 1 in updatedatabase.pl, since that will preserve the
current behaviour of Koha, but UseICU = 0 in sysprefs.sql, since most new
installations will not have ICU activated.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Katrin Fischer [Mon, 19 Mar 2012 13:38:30 +0000 (14:38 +0100)]
Bug 7734: NO_LIBRARY_SET should be translatable
To test:
- Make sure you are logged into Koha as 'root' user - not superlibrarian
- Before the patch the label will show 'NO_LIBRARY_SET', after applying
the patch it will be 'NO LIBRARY SET' without underscores.
- Verify correct description is shown after selecting a library.
Signed-off-by: mveron <veron@veron.ch> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Janusz Kaczmarek [Tue, 25 Jan 2011 17:10:00 +0000 (18:10 +0100)]
Bug 5657: Changes made to sub merge to eliminate errors occuring when updating bibio records in batch (after updating multiple authority records)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
One of the tests in t/db_dependent/Linker_FirstMatch.t ony works if Zebra is
running and authorities have been indexed. This was causing Jenkins agitas.
The test should be skipped if Zebra isn't running or authorities have not been
indexed at the time the test is run.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Srdjan Jankovic [Fri, 27 Jan 2012 03:59:27 +0000 (16:59 +1300)]
bug_7140: Added item description to complement icon to search result and biblio detail pages
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This seems like a very big improvement, especially for people using screen
readers. I agree that the change to C4::Search is required.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Thu, 8 Mar 2012 13:53:45 +0000 (08:53 -0500)]
Bug 7670 - make required fields red
Adding "required" style and "Required" note to additem fields,
consistent with the way required fields are displayed
on the add patron form.
This patch also corrects an error in the client-side validation
script which misidentified which fields were required. Leaving
a required field empty should result in an alert and the missing
field being highlighted in yellow.
To test, open the add item form on a record which uses
a framework in which one or more item fields are required.
Required fields should be labeled in red and appended with a
"Required" note.
Submit the form while some required fields are empty. You should
see a javascript alert. The empty mandatory fields should have
a yellow background.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Works - passes tests.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Tue, 6 Mar 2012 19:08:04 +0000 (14:08 -0500)]
Bug 7656 - "undefined" pop-up message when putting hold on reference item
This is a single line fix. Initializing the msg var to an empty
string solves the problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
David [Mon, 12 Mar 2012 23:17:32 +0000 (10:17 +1100)]
Bug 7618 Escape HTML special characters for SQL displayed above results in Report module
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Marcel de Rooy [Mon, 12 Mar 2012 11:33:07 +0000 (12:33 +0100)]
7368 Typo in cart_to_shelf
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 5 Mar 2012 19:47:51 +0000 (14:47 -0500)]
Bug 7644 - Invalid markup in staff client language chooser
This patch removes invalid markup from the language chooser
in the intranet. It also copies the markup and style of
the staff client include to the OPAC so the two are
more consistent. I hope that will make future changes
and debugging a little easier.
I believe this patch also fixes Bug 7366, "Language chooser
display problems."
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes bug 7366, but there is still a difference between staff
and OPAC.
Installed languages: en, en-NZ, de-DE, fr-FR
Activated langauges: en, en-NZ, fr-FR
OPC shows English, staff shows en-NZ as label for the list.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
1. Edit a patron, and try to use the datepicker to set the date the patron is
restricted until.
2. Note that the datepicker does not come up.
3. Apply patch.
4. Repeat step 1.
5. Note that the datepicker does come up.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Katrin Fischer [Sun, 26 Feb 2012 21:25:41 +0000 (22:25 +0100)]
Bug 7609: Improving links to find analytics and volumes when using UseControlnumber (MARC21)
To test:
- switch on UseControlnumber
- add a serial record with 001
- ldr pos 19 = a or
- 008 (continuing resource), pos 21 = m
- add 2 analytics with with $w subfields containing the 001 of the serial
- one with ldr pos 7 = a
- one with ldr pos 7 = b
- add 1-2 monographical records linked to the serial
- 8xx $w subfield containing the 001 of the serial
- 490
The serial should show 2 links (in both OPAC and Intranet):
'Show volumes' should only bring up the monographical records.
'Show analytics' should only find the analytical records.
Without the patch both links would find all linked records, no difference
between both links.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Other facets subfields could be added now. For example, other subjects
subfields.
Following patches are required to handle better MARC21 subfields and choose
other subfields to deal with UNIMARC format.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested under both MARC21 and UNIMARC. Does not cause any regressions with
MARC21, and offers the possibility for better faceting there in the future.
Works as advertised with UNIMARC.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Liz Rea [Wed, 7 Mar 2012 19:29:58 +0000 (13:29 -0600)]
Bug 7665 - Bibs with no ISBN's show broken images for covers when using Syndetics cover images
Patch fixes problem for syndetics + bibs with no ISBN. Also adds "no image found" capability to Syndetics results.
To test (first, contact me and I will let you use my syndetics credentials *for testing this bug only*):
* replicate bug - have a bib with an ISBN, and one without. The one with the ISBN should show a cover, the one without will show a broken image.
* apply patch
* search for the same bib - you should now see "no image available" for the one with no ISBN, and a cover image for your bib with an ISBN.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA Comment: normalized spacing
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Thu, 1 Mar 2012 20:06:25 +0000 (15:06 -0500)]
Bug 7636 - error when trying to email cart when opacuserlogin set to don't allow
This patch hides the "send cart" link if the opacuserlogin
preference is set to disallow. Other similar changes included:
- hide the "send list" link
- hide the "your lists" tab
- hide the "log in to create your own lists" link
- hide the "recent comments" link
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested with opacuserlogin set to both "Allow" and "Don't allow." With
opacuserlogin set to "Allow," the links showed up, and with opacuserlogin
set to "Don't allow," the links did not.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 5 Mar 2012 17:38:00 +0000 (12:38 -0500)]
Bug 7645 - System preferences editor save button obscured by language chooser
This patch amends the preferences page's CSS file to add
bottom padding to the page container. This gives the bottom-
most submit button some breathing room.
Markup correction: Adding "row" and "col" attributes to
<textareas> to quiet validation errors. This doesn't
affect output at all (dimensions are specified in CSS).
To test, open the system preferences page to a tab like OPAC
which contains many preferences. At the bottom of the page
the last submit button should have about a line's worth of
white space below it.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Thu, 1 Mar 2012 15:00:14 +0000 (10:00 -0500)]
Bug 7631 - Self checkout renewal fails because of reference to non-existent subroutine in sco-main.pl
Changing "CanBookBeIssuedCheckout" to "CanBookBeIssued"
To test, try to renew an item which has no renewals left. Before the patch
you'll get an error:
Undefined subroutine &main::CanBookBeIssuedCheckout called at /opac/sco/sco-main.pl line 135.
After the patch you'll get the correct message about having no renewals left.
Other tests: checking out a barcode which doesn't exist, checking out an
item which is on hold for another patron.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Srdjan Jankovic [Wed, 7 Mar 2012 03:53:09 +0000 (16:53 +1300)]
Bug 6488: Display OPAC search result count conditional to OpacHiddenItems syspref
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Amended this patch for a small spelling issue: supress->suppress. Could not suppress it ;)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Thu, 1 Mar 2012 14:40:01 +0000 (09:40 -0500)]
Bug 7629 - Update sco.css to include CSS Gradients and prevent error upon missing background image file
Copying CSS gradients for input buttons and dialogs from opac.css. Also copied missing
CSS for language-picker footer. Markup corrected in a couple of places in order
for the right style to be applied.
To test corrections to dialog CSS, enter an invalid patron barcode.
Multiple languages will have to be enabled in order to see the footer
correction working.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Dialog CSS looks correct, footer also looks correct with multi languages.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Liz Rea [Mon, 28 Nov 2011 17:39:33 +0000 (11:39 -0600)]
Bug 7271 - change sort in items.pm to sort by home library instead of holding branch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 6 Feb 2012 14:05:18 +0000 (09:05 -0500)]
Bug 7493 [REVISED] Deleting a record with comments breaks "Recent Comments"
Adding foreign key constraint on biblio and borrowers:
- delete reviews when bibliographic records are deleted
- set set reviews.borrowernumber to NULL when patron records are deleted.
Before these constraints are set the database update script will
clean up existing instances of these problems by deleting reviews of
deleted biblios and setting to NULL reviews.borrowernumber for deleted
patrons.
In comments moderation, the list of comments will indicate "(deleted patron")
if the review was submitted by a patron who has since been deleted.
In the OPAC display of comments will omit the patron name altogether
if the patron has since been deleted.
To test:
1. CONFIRM THAT THE DATABASE UPDATE RUNS CORRECTLY
Before applying the patch:
- delete the record for a title which has a review
- delete a patron who has submitted a review (on a different title).
Viewing /cgi-bin/koha/opac-showreviews.pl should result in an error.
Apply the patch and make sure the database update runs. Viewing
the recent comments page in the OPAC should no longer result in an
error. The title with the comment from a deleted patron should
show no patron name on these pages:
Comments from other patrons should show correctly.
2. CONFIRM THAT NEW DELETIONS PERFORM CORRECTLY
After applying the patch:
- delete the record for a title which has a review
- delete a patron who has submitted a review (on a different title).
Viewing /cgi-bin/koha/opac-showreviews.pl should NOT result in an error.
The review of the title which you deleted should no longer appear in the
list of recent comments.
The title with the comment from a deleted patron should
show no patron name on these pages:
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Squashed patch incorporating all previous patches (there is no functional
change compared to the previous version of this patch, this patch merely
squashes the original patch and follow-up, and rebases on latest master).
=== TL;DR VERSION ===
*** Installation ***
1. Run installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt1
and installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt2
2. Make sure you copy the following files from kohaclone to koha-dev:
etc/zeradb/authorities/etc/bib1.att,
etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml,
etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl,
etc/zebradb/marc_defs/marc21/authorities/koha-indexdefs-to-zebra.xsl, and
etc/zebradb/marc_defs/unimarc/authorities/record.abs
3. Run misc/migration_tools/rebuild_zebra.pl -a -r
*** Important notes ***
You must have rebuild_zebra processing the zebraqueue for bibs when testing this
patch.
=== DESCRIPTION ===
*** Cataloging module ***
* Added an additional box to the authority finder plugin for "Heading match,"
which consults not just the main entry but also See-from and See-also-from
headings.
* With this patch, the automatic authority linking will actually work properly
in the cataloging module. As Owen pointed out while testing the patch,
though, longtime users of Koha will not be expecting that. In keeping with
the principles of least surprise and maximum configurability, a new syspref,
CatalogModuleRelink makes it possible to disable authority relinking in the
cataloging module only (i.e. leaving it enabled for future runs of
link_bibs_to_authorities.pl). Note that though the default behavior matches
the current behavior of Koha, it does not match the intended behavior.
Libraries that want the intended behavior rather than the current behavior
will need to adjust the CatalogModuleRelink syspref.
*** misc/link_bibs_to_authorities.pl ***
Added the following options to the misc/link_bibs_to_authorities.pl script:
--auth-limit Only process those headings that match the authorities
matching the user-specified WHERE clause.
--bib-limit Only process those bib records that match the
user-specified WHERE clause.
--commit Commit the results to the database after every N records
are processed.
--link-report Display a report of all the headings that were processed.
Converted misc/link_bibs_to_authorities.pl to use POD.
Added a detailed report of headings that linked, did not link, and linked
in a "fuzzy" fashion (the exact semantics of fuzzy are up to the individual
linker modules) during the run.
*** C4::Linker ***
Implemented new C4::Linker functionality to make it possible to easily add
custom authority linker algorithms. Currently available linker options are:
* Default: retains the current behavior of only creating links when there is
an exact match to one and only one authority record; if the 'broader_headings'
option is enabled, it will try to link to headings to authority records for
broader headings by removing subfields from the end of the heading (NOTE:
test the results before enabling broader_headings in a production system
because its usefulness is very much dependent on individual sites' authority
files)
* First Match: based on Default, creates a link to the *first* authority
record that matches a given heading, even if there is more than one
authority record that matches
* Last Match: based on Default, creates a link to the *last* authority
record that matches a given heading, even if there is more than one record
that matches
The API for linker modules is very simple. All modules should implement the
following two functions:
<get_link ($field)> - return the authid for the authority that should be
linked to the provided MARC::Field object, and a boolean to indicate whether
the match is "fuzzy" (the semantics of "fuzzy" are up to the individual plugin).
In order to handle authority limits, get_link should always end with:
return $self->SUPER::_handle_auth_limit($authid), $fuzzy;
<flip_heading ($field)> - return a MARC::Field object with the heading flipped
to the preferred form. At present this routine is not used, and can be a stub.
Made the linking functionality use the SearchAuthorities in C4::AuthoritiesMarc
rather than SimpleSearch in C4::Search. Once C4::Search has been refactored,
SearchAuthorities should be rewritten to simply call into C4::Search. However,
at this time C4::Search cannot handle authority searching. Also fixed numerous
performance issues in SearchAuthorities and the Linker script:
* Correctly destroy ZOOM recordsets in SearchAuthorities when finished. If left
undestroyed, efficiency appears to approach O(log n^n)
* Add an optional $skipmetadata flag to SearchAuthorities that can be used to
avoid additional calls into Zebra when all that is wanted are authority
records and not statistics about their use
*** New sysprefs ***
* AutoCreateAuthorities - When this and BiblioAddsAuthorities are both turned
on, automatically create authority records for headings that don't have
any authority link when cataloging. When BiblioAddsAuthorities is on and
AutoCreateAuthorities is turned off, do not automatically generate authority
records, but allow the user to enter headings that don't match an existing
authority. When BiblioAddsAuthorities is off, this has no effect.
* CatalogModuleRelink - when turned on, the automatic linker will relink
headings when a record is saved in the cataloging module when LinkerRelink
is turned on, even if the headings were manually linked to a different
authority by the cataloger. When turned off (the default), the automatic
linker will not relink any headings that have already been linked when a
record is saved.
* LinkerModule - Chooses which linker module to use for matching headings
(current options are as described above in the section on linker options:
"Default," "FirstMatch," and "LastMatch")
* LinkerOptions - A pipe-separated list of options to set for the authority
linker (at the moment, the only option available is "broader_headings," which
is described below)
* LinkerRelink - When turned on, the linker will confirm the links for headings
that have previously been linked to an authority record when it runs. When
turned off, any heading with an existing link will be ignored.
* LinkerKeepStale - When turned on, the linker will never *delete* a link to an
authority record, though, depending on the value of LinkerRelink, it may
change the link.
*** Other changes ***
* Cleaned up authorities code by removing unused functions and adding
unimplemented functions and added some unit tests.
* This patch also modifies the authority indexing to remove trailing punctuation
from Match indexes.
* Replace the old BiblioAddAuthorities subroutines with calls into the new
C4::Linker routines.
* Add a simple implementation for C4::Heading::UNIMARC. (With thanks to F.
Demians, 2011.01.09) Correct C4::Heading::UNIMARC class loading. Create
biblio tag to authority types data structure at initialization rather than
querying DB.
* Ran perltidy on all changed code.
*** Linker Options ***
Enter "broader_headings" in LinkerOptions. With this option, the linker will
try to match the following heading as follows:
=600 10$aCamins-Esakov, Jared$xCoin collections$vCatalogs$vEarly works to
1800.
First: Camins-Esakov, Jared--Coin collections--Catalogs--Early works to 1800
Next: Camins-Esakov, Jared--Coin collections--Catalogs
Next: Camins-Esakov, Jared--Coin collections
Next: Camins-Esakov, Jared (matches! if a previous attempt had matched, it
would not have tried this)
This is probably relevant only to MARC21 and LCSH, but could potentially be of
great use to libraries that make heavy use of floating subdivisions.
=== TESTING PLAN ===
Note: all of these tests require that you have some authority records,
preferably for headings that actually appear in your bibliographic data. At
least one authority record must contain a "see from" reference (remember which
one contains this, as you'll need it for some of the tests). The number shown
in the "Used in" column in the authority module is populated using Zebra
searches of the bibliographic database, so you *must* have
rebuild_zebra.pl -b -z [-x] running in cron, or manually run it after running
the linker.
*** Testing the Heading match in the cataloging plugin ***
1. Create a new record, and open the cataloging plugin for an
authority-controlled field.
2. Search for an authority by entering the "see from" term in the Heading Match
box
3. Confirm that the appropriate heading shows up
4. Search for an authority by entering the preferred heading into the Main
entry or Main entry ($a only) box (i.e., repeat the procedure you usually
use for cataloging, whatever that may be)
5. Confirm that the appropriate heading shows up
*** Testing the cataloging interface ***
6. Turn off BiblioAddsAuthorities
7. Confirm that you cannot enter text directly in an authority-controlled field
8. Confirm that if you search for a heading using the authority control plugin
the heading is inserted (note, however, that this patch does not AND IS NOT
INTENDED TO fix the bugs in the authority plugin with duplicate subfields;
those are wholly out of scope- this check is for regressions)
9. Turn on BiblioAddsAuthorities and AutoCreateAuthorities
10. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is automatically created, and the heading you
entered linked
11. Confirm that if you enter a heading with only a subfield $a that fully
*matches* an existing heading (i.e. the existing heading has only
subfield $a populated), the authid for that heading is inserted into
subfield $9
12. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
13. Turn on BiblioAddsAuthorities and turn off AutoCreateAuthorities
14. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is *not* created
15. Confirm that if you enter a heading with only a subfield $a that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
16. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
17. Create a record and link an authority record to an authorized field using
the authority plugin.
18. Save the record. Ensure that the heading is linked to the appropriate
authority.
19. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
20. Ensure that the heading remains linked to that same authority.
21. Change CatalogModuleRelink to "on."
22. Open the record. Use the authority plugin to link that heading to the
same authority record you did earlier.
23. Save the record. Ensure that the heading is linked to the appropriate
authority.
24. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
25. Ensure that the heading is no longer linked to the old authority record.
*** Testing link_bibs_to_authorities.pl ***
26. Set LinkerModule to "Default," turn on LinkerRelink and
BiblioAddsAuthorities, and turn AutoCreateAuthorities and
LinkerKeepStale off
27. Edit one bib record so that an authority controlled field that has already
been linked (i.e. has data in $9) has a heading that does not match any
authority record in your database
28. Run misc/link_bibs_to_authorities.pl --link-report --verbose --test (you may
want to pipe the output into less or a file, as the result is quite a lot of
information)
29. Look over the report to see if the headings that you have authority records
for report being matched, that the heading you modified in step 2 is
reported as "unlinked," and confirm that no changes were actually made to
the database (to check this, look at the bib record you edited earlier, and
check that the authid in the field you edited hasn't changed)
30. Run misc/link_bibs_to_authorities.pl --link-report --verbose (you may want
to pipe the output into less or a file, as the result is quite a lot of
information)
31. Check that the heading you modified has been unlinked
32. Change the modified heading back to whatever it was, but don't use the
authority control plugin to populate $9
33. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
34. Confirm that the heading has been linked to the correct authority record
35. Turn LinkerKeepStale on
36. Change that heading to something else
37. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
38. Confirm that the $9 has not changed
39. Turn LinkerKeepStale off
40. Create two authorities with the same heading
41. Run misc/migration_tools/rebuild_zebra.pl -a -z
42. Enter that heading into the bibliographic record you are working with
43. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
44. Confirm that the heading has not been linked
45. Change LinkerModule to "FirstMatch"
46. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
47. Confirm that the heading has been linked to the first authority record it
matches
48. Change LinkerModule to "LastMatch"
49. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
50. Confirm that the heading has been linked to the second authority record it
matches
51. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--auth-limit="authid=${AUTH}" (replacing ${AUTH} with an authid)
52. Confirm that only that heading is displayed in the report, and only those
bibs with that heading have been changed
If all those things worked, good news! You're ready to sign off on the patch
for bug 7284.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master and squashed follow-up, 16 February 2012 Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master, 21 February 2012
Signed-off-by: schuster <dschust1@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Tested with an UNIMARC setup that things work fine. They do
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Cherry-picked onto 3.6.x, 10 March 2012
Note for RMaint: this patch squashes all the bug 7284 patches from Master,
including the updatedatabase changes (but does not set the DB revision).
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
D Ruth Bavousett [Mon, 13 Feb 2012 15:25:40 +0000 (10:25 -0500)]
Bug 7535: ampersands not showing properly in non-XSLT OPAC
Jared's fix for Bug 3326 fixed this in the staff client, but not the OPAC; moving this one line fixes it
both places.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
This can be replicated by indexing with -x
OPACXSLTResults must be set to "normally"
Reproduced original bug with rebuild-zebra.pl -x -b -w -r -v -v
Patch corrects the issue, does not change intranet behavior.
Liz Rea [Fri, 17 Feb 2012 20:00:53 +0000 (14:00 -0600)]
Bug 6488 - followup - fixes issue with bibs with no items and serials being suppressed
To test:
* create a bib with no items
* update your index
serial records and your new bib with no items should be displayed.
* add something to the OPACHiddenItems syspref (I like itype: [BK] from the test data)
*** test both ways, with something in there and with the syspref empty.
* add an item to your new bib that would be suppressed
* update your index
* search for the bib
The item should not show
* change the item into a state where it would no longer be suppressed
* update your index
* search for the bib
The item should show in the opac
* just for fun, delete your item
* update your index
* Search for the bib - it should still display.
Srdjan Jankovic [Wed, 21 Dec 2011 08:26:30 +0000 (21:26 +1300)]
bug_7090: AllowItemsOnHandCheckout syspref
Observe AllowItemsOnHandCheckout syspref when using SIP self checkout
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
To test:
* place an item on hold for patron A
* attempt to circulate that item to patron B (via SIP/selfcheck)
syspref off: item should not circulate to patron B
Syspref On: item should circulate to patron B
Both conditions passed in our testing.
Also verified that normal staff client behavior regarding this situation was preserved. It was.
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
-backported to 3.6.x
Adrien Saurat [Mon, 9 Jan 2012 10:55:08 +0000 (11:55 +0100)]
Bug 7357: display serial title instead of '---'
The full title of a serial is now displayed even
if several lines have the same title.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit cb1a9466931790bbe3aac19845a3c7b441e43ea2)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Robin Sheat [Sun, 12 Feb 2012 03:36:34 +0000 (16:36 +1300)]
Bug 7532 - remove dependency on Date::ICal
This removes the dependency on Date::ICal (which is largely
unmaintained) and replaces it with DateTime::Format::ICal which can do
the same job. It also updates all the docs and installation scripts to
handle this change.
Note that this causes a minor behaviour change: previously the generated
times were converted to UTC, now they are left "floating" (that is, have
no timezone attached) and so will appear as the local time when imported
into a calendar. I don't anticipate this'll cause any issues however.
Srdjan Jankovic [Wed, 8 Feb 2012 02:12:05 +0000 (15:12 +1300)]
bug_7458: A call number plugin
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
A library using an inhouse callnumbering system wants to be able to generate the next available call number not already in use. This custom call number plugin returns the next callnumber not already in use once a correct prefix has been entered. The prefixes are four to six letters, space, then one or two numbers.
(cherry picked from commit ecc1e94f35491ba392aa3bfd17118c55fa14e55b)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Robin Sheat [Fri, 10 Feb 2012 03:10:28 +0000 (16:10 +1300)]
Bug 7409 - add unzip and perl-doc dependencies to package
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 4e8cd9a9ddd3c76745a5102498d8836457173db5)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Bug 7312: Adds ISSN to serials/subscription-bib-search.pl results
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 91d0475a9b43dc3fbe6b373dc8dacd5db4bca9df)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Paul Poulain [Wed, 1 Feb 2012 14:15:02 +0000 (15:15 +0100)]
Bug 7246 add offset/length and where options to rebuild_zebra
This patch reimplement a feature that is on biblibre/master for Koha-community/master
It adds 4 parameters:
* offset = the offset of record. Say 1000 to start rebuilding at the 1000th record of your database
* length = how many records to export. Say 400 to export only 400 records
* where = add a where clause to rebuild only a given itemtype, or anything you want to filter on
Another improvement resulting from offset & length limit is the rebuild_zebra_sliced.zsh
that will be submitted in another patch.
rebuild_zebra_sliced will slice your all database in small chunks, and, if something went wrong for a given slice, will slice the slice, and repeat, until you reach a slice size of 1, showing which record is wrong in your database.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed mention of -l option for limiting number of items exported, as requested
by QA manager. This can be re-added in a later patch.
Srdjan Jankovic [Thu, 9 Feb 2012 00:24:35 +0000 (13:24 +1300)]
bug_7201: Holds reports: add copynumber and enumchron
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Data is there and correct - very helpful patch, thanks!
passes prove t xt t/db_dependent in line with current master failures.
Liz Rea [Wed, 25 Jan 2012 20:41:03 +0000 (14:41 -0600)]
Bug 6985 - remove kw,wrdl from the search results
To test:
* Apply patch
* Do a search in the OPAC, the result page should now say
"Your search returned X results" instead of
"Your search for "kw,wrdl:yyy" returned x results"
* Do a search that will have no results, kw,wrdl should not appear in the text.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Adrien Saurat <adrien.saurat@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 4490650e2fc5dd4da6bd2e339434f1366beb610d)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Katrin Fischer [Mon, 23 Jan 2012 06:43:11 +0000 (07:43 +0100)]
Bug 5346: Small display changes
Changing display from:
Suggested by Admin, Koha (from suggestion #2)
To:
Suggested by: Admin, Koha (suggestion #2)
Adding some missing parentheses and deleting some additional spaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit b5f7a1f8771fb0d98db3b39f1ef6315783c30238)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Jonathan Druart [Wed, 18 Jan 2012 13:16:16 +0000 (14:16 +0100)]
Bug 5346: Linking suggestions and orders.
Display suggestion info in acquisition module:
basket.pl
neworderempty.pl
orderreceive.pl
parcel.pl
To Test:
Create a suggestion and accept it.
Create a new order from this suggestion
Receive this order
For each step, check if suggestion info are visible.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test provides more unit tests, all complete successfully.
perl t/db_dependent/Suggestions.t
Note: test case should be cleaned up after running tests.
Display changes are consistent and information about the suggestion
is shown on every important screen now.
I created an order from a suggestion and one from an existing record.
Garry Collum [Wed, 18 Jan 2012 01:28:55 +0000 (20:28 -0500)]
Bug 7203: Fixes typo - 'Mange' to 'Manage' in several files.
Found 3 instances of the typo while looking for the typo reference in Bug 7203.
Fixed labels/label-edit-batch.tt, labels/label-edit-layout.tt, and patroncards/edit-layout.tt.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 6a60642a9dbe3103854dc1edfe68a4765e3c03f8)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Garry Collum [Fri, 20 Jan 2012 16:23:04 +0000 (11:23 -0500)]
Bug 7114: Fixes the Funds' page display after the Filter link is clicked.
On the funds page there is a Fund Filters form and a menu underneath this form. When the form is hidden the contents of the page shift to the left overlapping the menu. The menu underneath the fund filters form must have been a later edition. This patch removes the line of javascript that shifts the contents of the page after the form is hidden.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the broken Layout when clicking on 'Filters'.
I am a bit confused by the link. I think it should toggle between different descriptions and
perhaps even hide all of the left navigation. This way the funds table would get more
room for display.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 3fcdd902f8fcd6d64fba8f434ae811d8e1a04fdd)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Magnus Enger [Fri, 3 Feb 2012 08:57:32 +0000 (09:57 +0100)]
Bug 7489 - Implement DisplayOPACiconsXSLT for NORMARC XSLT
This patch actually hides the whole line that contains the icon in the result
list, including "literary form" and "audience", but this is how the syspref
works for MARC21 too, so I'm sticking with that.
To test:
- Set marcflavour = NORMARC
- Set OPACXSLTResultsDisplay = on
- Set DisplayOPACiconsXSLT = show
- Check that icons and information about "Type", "Litterær form" and
"Målgruppe" are displayed in results, "Type" and the icon in detail
- Set DisplayOPACiconsXSLT = don't show
- Check that icons and information is not displayed in result or detail
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan worked nicely. Patch works as advertised.
Katrin Fischer [Fri, 10 Feb 2012 06:17:33 +0000 (07:17 +0100)]
Bug 7521: Templates should use receive_serials permission
Corrects templates to use permission receive_serials.
Before patch:
1) Serial receive page (/cgi-bin/koha/serials/serials-edit.pl...)
can only be accessed with full serials permissions.
When one permission is missing, page can not be accessed.
2) Serial collection/Issue History page (/cgi-bin/koha/serials/serials-collection.pl...)
can only be accessed with full serials permissions.
After applying patch:
1) Serial receive page can only be accessed when user has receive_serials
permission.
2) Edit and serial receive links are hidden, when user doesn't have
serials_receive permission. Page is accessible with at least 1 serials
permission.
I will send a another patch to correct behaviour for the routing permission.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit d9d364516b0bd5363c95b134520bb0379836be51)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Chris Cormack [Thu, 16 Feb 2012 20:23:53 +0000 (09:23 +1300)]
Bug 7551 : Can only renew for the user you are logged in as now
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 497f49d8b69e0be9e192b48bf40f2f5ab6cc92ce)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Liz Rea [Wed, 15 Feb 2012 20:13:49 +0000 (14:13 -0600)]
Bug 7546 - cannot view subscription detail
This patch adds a C4::Search to subscription-detail.pl to compensate for a removed
one from auth.pm during the denesting effort.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7546 Do not call routine as bareword
Fixes compilation errors due to calling routine without parens
Also nothing was gained (and obfuscation added) by forcing
the return into a hash ref have changed variable to hash
tidied up the if else chain
These routines should be refactored out future
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
bug 7546 follow-up, enabled_staff_search_views problem
* enabled_staff_search_views was not exported by C4::Search, should have been
* serials/serials-edit.pl were also missing it
Comments:
* checked with for file in */*.pl; do perl -wc $file; done that no script was still having this problem
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Final sign off for all 3 patches
Note: I had some problems with tests, but it is probably related to my data and not this patch.
(cherry picked from commit 1ddc9322dfc13ef7f1e930692bfd2cb3771b102b)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
Marcel de Rooy [Thu, 19 Jan 2012 08:50:03 +0000 (09:50 +0100)]
Bug 3264 UnCloneField() / minus button in MARC editor can clear all subfields (authorities AND biblio)
All subfields following the removed subfield were not saved.
Problem is in C4/Biblio routine TransformHtmlToMarc.
If the field is emptied, the param list contains a code param but no subfield
param. The while loop handling the subfields could not handle that. Also added
a FIXME because the whole routine depends on an assumption about the order of
cgi parameters that is not strictly guaranteed.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
I was unable to replicate the problem, but can confirm that the patch does
not break anything under any of the following platforms/browsers:
Mac OS X 10.6.8:
Chrome 16.0.912.77
Firefox 9.0.1
Windows 7:
Firefox 3.6.3
Firefox 9.0.1
IE 8.0.7600.16385
Kyle M Hall [Wed, 8 Feb 2012 15:45:53 +0000 (10:45 -0500)]
Bug 7018 - need all acq permissions to search
Single line fix. Changes permissions required for histsearch.pl
from requiring * for acquisitions to only requiring
group_manage, order_manage, and order_receive
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(cherry picked from commit 0d037efd358c5516466c5df99e565d5fd98d5a74)
Signed-off-by: Chris Nighswonger <chris.nighswonger@gmail.com>
projects / koha.git / log