Owen Leonard [Mon, 31 Oct 2011 15:01:35 +0000 (11:01 -0400)]
Fix for Bug 7120 - After deleting order from order receive page redirect fails
The order modification script doesn't retrieve an order's basket
when doing a delete, so the template must explicitly pass
the basket number if we want the redirect to work.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Martin Renvoize [Thu, 27 Oct 2011 16:58:28 +0000 (17:58 +0100)]
Bug 7108 - OPAC Translations Display Patch
If multiple similar languages (i.e: fr-FR, fr-CS or en, en-GB) are installed
and the opaclanguagesdisplay preference is set to allow patrons to choose a
language then at each occurrence of a language with multiple options the
display is the selector splits across multiple lines breaking the display.
http://bugs.koha-community.org/show_bug.cgi?id=7108 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes deprecated calls to HTML::Template or HTML::Template::Pro from:
C4/Output.pm
catalogue/export.pl
reports/issues_by_borrower_category.plugin
reports/itemtypes.plugin
Only remaining calls are in misc/cronjobs/rss/rss.pl, misc/cronjobs/smsoverdues.pl,
and t/test_template.pl. These scripts still legitimately depend on H:T:P
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marcel de Rooy [Mon, 17 Oct 2011 07:28:38 +0000 (09:28 +0200)]
Bug 7041: Sort >1000 search results with sortmax parameter in zebra config file
By default, zebra does not sort more than 1000 records (search results). You
can increase this number by adding the sortmax parameter in zebra-biblios.cfg.
Putting this value in Koha's zebra config file will make this default value
visible and make it easier to increase it if one prefers that.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Robin Sheat [Wed, 12 Oct 2011 05:29:28 +0000 (18:29 +1300)]
Bug 7008 - create tmp dir for zebra
Sometimes zebra needs a tmp dir in order to work. This ensures that it
is created both by koha-create-dirs in the packages, and by
rebuild_zebra when it runs.
--
tested ok, signing off Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 6997: Koha-remove leaves system in inconsistent state
If you accidentally delete one of the files that koha-remove is supposed to
remove, when koha-remove reaches that point in the script, it will die, leaving
later removal steps undone. This patch fixes the problem by checking for the
existence of each file prior to deleting it, so that short of an actual problem
with removing the file, the script can continue. Note that the fix for bug 6929
is also needed to prevent any problems with stopping Zebra from killing
koha-remove.
Paul Poulain [Tue, 27 Sep 2011 13:13:01 +0000 (15:13 +0200)]
Bug 6926 : overdue_notices don't send itemcount to notification
In advanced_notices.pl you can return the number of due items using <<count>>
flag.
If you use this flag in overdue_notices, it does not work, no number is
displayed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Katrin Fischer [Sun, 27 Nov 2011 13:52:22 +0000 (14:52 +0100)]
Bug 5974: Fix broken toolbar on paton checkout tab
Fixed a couple of errors:
- [% CAN_user_staffaccess %] should be [% IF ( CAN_user_staffaccess ) %]
- added missing [% END %]
- added missing line new YAHOO.widget.Button("duplicate");
To test:
1) Open patron account
2) Go through tabs, especially 'Check out'
3) Check toolbars are correct and buttons work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Paul Poulain [Fri, 2 Dec 2011 16:31:41 +0000 (17:31 +0100)]
Bug 6015, new script for load testing
This benchmark_staff.pl script is based on the previous benchmark_circulation.pl script
As it does not test only circulation, the renaming was necessary.
The script has many enhancement compared to the benchmark_circulation.pl one
The benchmark_staff will run a benchmark on the following pages:
* mainpage.pl
* catalogue/detail.pl
* catalogue/search.pl
* members/member.pl (search on a name)
* members/member.pl (search on a 1st letter)
* circulation/circulation.pl and return.pl (check-out and check-in)
* all those steps at the same time
run the script without any parameter to get syntax
Paul Poulain [Mon, 28 Nov 2011 11:13:42 +0000 (12:13 +0100)]
fixing the translatable-template.t to handle localized setups
Depending on your locale, msgmerge will return a different messages, enclosed in .... and .
The flow is not utf8 compliant, so this patch switches to testing "..... anything." instead of ".... word."
Chris Cormack [Mon, 7 Nov 2011 02:30:20 +0000 (15:30 +1300)]
Bug 7268: Fixing failing tests for translatable templates
To test run
perl xt/author/translatable-templates.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test runs without any complaints about the fixed templates now.
Also checked detail pages without XSLT turned on display correctly.
Katrin Fischer [Tue, 25 Oct 2011 15:38:04 +0000 (17:38 +0200)]
Bug 6894: Order from suggestion defaulting to wrong currency
This problem turned out to be a bit different, than I initally thought.
This patch fixes the currency selections for new orders created in staff.
Before this patch, the first currency in the list was selected instead
of the active currency. So you needed to change it explicitly.
After patch it should work like this:
1) Suggestion created in OPAC - currency defaults to NULL in database
2) Editing a suggestion created in OPAC will default to active currency.
3) Creating a new suggestion in staff will default to active currency.
4) When ordering, the currency will default to the vendor currency, if no
currency is set in the suggestion. (still happens, when suggestions are accepted
in batch from the list.
I hope this is right - comments and testing appreciated.
Signed-off-by: Liz Rea <lrea@nekls.org>
Verified that in the above places, active currency was displayed or selected. Tested both suggestions entered from the OPAC and from the intranet.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Verified the existence of the bug, and that the fix works as advertised.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Chris Cormack [Fri, 25 Nov 2011 18:39:51 +0000 (07:39 +1300)]
Bug 6628 : Stopping a potential vulnerability
Signed-off-by: Frère Sébastien Marie <semarie-koha@latrappe.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- verified help pages still work
- verified /cgi-bin/koha/help.pl?url=koha/../catalogue/advsearch.pl does not
show the template file (did work on master, not after applying patch)
- verified cgi-bin/koha/help.pl?url=koha/../../../../../../etc/passwd%00.pl does not work (didn't work on master or after applying patch)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The potential vulnerability would allow anyone to see the content of any .tt file, and .tt only. Was much less critical than the vulnerability for 6629, but it's worth fixing !
Katrin Fischer [Mon, 21 Nov 2011 06:54:15 +0000 (07:54 +0100)]
Bug 7250: stage_biblios_file.pl is missing options for encoding
- adds command line options for encoding, defaulting to utf8
- options match options availablen in the stage marc records form
of the staff interface
- activates warnings
- adds copyright statement
To test:
Import records with diacritics using the stage_biblios_file.pl
Records can be imported into the catalog using the staff interface
or the commit_biblios_file.pl script.
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Successfully tested with default encoding utf8.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Sat, 17 Sep 2011 11:45:09 +0000 (12:45 +0100)]
Bug 6877 - use is executed and errors at compile time
Although use is being called in an eval it will still be executed
at compile time so that an error can cause the script to abort before
the eval is executed. The eval expression syntax is not checked
so eval block should be preferred.
Use require/import which execute at runtime which is the intention
here.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
checked that, with Libravatar OK things are still OK
Paul Poulain [Fri, 21 Oct 2011 15:23:36 +0000 (17:23 +0200)]
Bug 6328 Fixes for comment 35
* correctly indenting with tab the debarrcomment field
* setdebar.pl is called without status parameter, thus it is not working anymore. It's fixed & some dead code has been removed. To test : debar someone, then go to patron detail page and click "lift debarment"
* the test function had not been updated. The fix define a debarment date of 2099-12-31 (no limit)
Paul Poulain [Tue, 11 Oct 2011 16:22:27 +0000 (18:22 +0200)]
Bug 6328 follow-up for QA comments
* fixed documentation in C4/Auth_with_ldap.pm
* updated ILSDI/Utility.pm to work with debarred being a date
* updated Members.pm/patronflags to work with debarred being a date (copy/paste of BibLibre code that had not been backported)
* fixed opac-reserve to check correctly for debarred status
I also have removed a duplicate line on circulation.pl when the patron was restricted = the information was displayed twice
Paul Poulain [Wed, 11 May 2011 14:54:56 +0000 (16:54 +0200)]
Bug 6328 fine in days does not work
Some code coming from BibLibre has been lost in the process of inclusion in
3.4. The result is that fine in days does not work at all (you can setup rules,
but it does nothing)
Step to reproduce:
- Koha > Admin > circ rules > set 1 day fine every day of overdue for default
rule
- Issue a book return date last week
- check-in the book => no debarment is set
The following patch will fix all of those problems by :
* updating borrowers.debarred to a date field (instead of tinyint). It contains
the limit of the debarment
* changing API of DebarMember and UpdateBorrowerDebarred to pass a date
* display debarrdate where applicable. Note that a debarrdate of 31/12/9999 is
considered as unlimited and not displayed
* added a debarrcomment, usefull to explain why a patron is debarred (this is
independant from debarrdate changes and can be used when placing an unlimited
debarment too)
[2011-05-12] F. Demians. It works as described. And I can confirm this
functionality is impatiently awaited by French libraries since one year. Thanks
BibLibre for the good work and for contributing this code.
Bug 6328 Followup--update DB structure
Thanks Katrin.
Bug 6328: make comment a textbox / fix debar by notice trigger
Debarring by notice triggers was broken, because the new function
expects a date as second parameter.
The comment field in patron account details was a very long text field.
Patch changes it to be a textbox instead.
Bug 6328: Lift debarment leaves patron account
'Lift debarment' redirects to an empty circulation page.
BZ6328 follow-up 3
Fixes comment 23 from Fernando L. Canizo : when the patron was debarred and debar removed
he still could not check-out.
The changes in the IsMemberBlocked (that were on biblibre/master) were lost somewhere
The sub was still checking for old_issues instead of calling CheckBorrowerDebarred
to get a debardate if applicable
Note : this bug was appearing only is you had issuing rules defined for itemtype/categorycode/branch.
Seemed to work if you had only default rules. That's probably why it hadn't been spotted before
BZ6328 follow-up 4
Comments fron Zeno Tajoli: The patch is OK and I sign-off it. Two little changes done on
installer/data/mysql/kohastructure.sql and installer/data/mysql/updatedatabase.pl
Katrin Fischer [Fri, 28 Oct 2011 15:33:31 +0000 (17:33 +0200)]
Bug 3388: Restore account number on vendor page
This patch makes it possible to add the account number to the
vendor information. The used field aqbookseller.accountnumber was
already existent in the database.
To test:
1) Add a new vendor with accountnumber
> Verify form has a field for accountnumber
> Verify accountnumber does show up on vendor summary page
2) Edit this vendor, change accountnumber
> Verify change was correctly saved and new number is displayed on
vendor summary page
3) Delete accountnumber
Signed-off-by: Liz Rea <lrea@nekls.org>
Tested 1-3, no troubles found.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Chris Cormack [Fri, 25 Nov 2011 06:07:28 +0000 (19:07 +1300)]
Bug 6629 : Sanitizing input from language cookie
I dont think we can use only 2 digits, some languages is much longer
zh-hans-TW for example
But the regex should stop it bening able handle nasty chars,
whitelisting safe ones instead
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked the patch doesn't break language switching and language selection.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I confirm the bug security issue was not here for master, but this fix improve the behaviour, so pushing it
Marcel de Rooy [Wed, 23 Nov 2011 12:33:26 +0000 (13:33 +0100)]
Bug 7254 Show pending orders from baskets with closedate > 180 days
Current code for selecting pending orders does not select orders from baskets
with a closedate > 180 days.
The code in Acquisition.pm already includes a FIXME for that.
IMHO this part of the where clause should just be removed; an order is pending
until it is filled. If you do not want to fill it, delete it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 20 Oct 2011 19:54:07 +0000 (15:54 -0400)]
Bug 7073: GetCOinSBiblio should take $record object, not biblionumber
This patch changes the GetCOinsBiblio subroutine to take a MARC record object
(as returned from GetMarcBiblio) instead of a biblionumber. The first thing the subroutine
did was GetMarcBiblio, and the $biblionumber passed was never used again.
This subroutine was only used 3 places: opac/opac-search.pl, opac/opac-detail.pl,
and C4/VirtualShelves/Page.pm. In the first and last cases, it was used in a loop.
In the last two cases, a call to GetMarcBiblio had already been done. This is expensive, and
we were doing it twice per record.
For opac/opac-search.pl, the call to GetMarcBiblio was moved to just outside GetCOinSBiblio;
this will not change the performance at all. But for opac/opac-detail.pl and C4/VirtualShelves/Page.pm,
a redudant call to GetMarcBiblio is now avoided.
To Test:
1. Enable COinSinOPACResults in system preferences. Perform a search in the OPAC.
Verify that the COinS spans are showing up
2. View the detail record of one of the returned items. Confirm that the COinS span exists on the detail page.
3. View a list in the OPAC. Confirm that COinS spans are still showing up
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Srdjan Jankovic [Wed, 16 Nov 2011 23:45:47 +0000 (12:45 +1300)]
Bug 6303: Display Organisation and Parent Organisation names when viewing a borrower of type organisation
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as advertised, doesn't affect display for non-organisational patrons.
Note: Display change in OPAC only affects the summary tab.
It would be a little bit more consistent to make the name show the
same on all tabs in OPAC patron account.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I repeated Katrin's signoff here (with permission). The patch only changed for some minor rebasing and cosmetic QA requests. Passed QA now.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Fri, 11 Nov 2011 17:34:44 +0000 (12:34 -0500)]
Incremental fix for Bug 2847, Use HTML escape in templates where appropriate
Fixes for output in a couple of acquisitions templates where
user-generated data should be escaped. This instances were found
by creating a vendor name like "Baker & Taylor" and finding
that the ampersand was not escaped, causing validation errors.
This patch also consolidates multiple <script> blocks which
do not need to be separate and corrects a couple of unclosed
<input> tags.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 17 Nov 2011 15:27:47 +0000 (10:27 -0500)]
Bug 7134: patron records getting corrupted birthdates
If no date of birth is provided in a new member form, the borrower gets the birthdate of "00/02/0", which
is obviously incorrect (the result of passing 0 to the database directly)
The fix is to remove a conditional check buried deep in C4::SQLHelper. This is in a helper subroutine that was changed
for the Unified Member Search dev (bug 6253). Reverting this small change to the conditional does not seem to break
search, but testing will be required.
To test:
1. apply patch, and create a new patron with blank birthdate. The new patron should now have a blank birthdate instead of '00/02/0'
2. search for a borrower by 1 part surname, confirm search works
3. search for a borrower by 2 part surname, confirm search works
4. search for a borrower across firstname AND surname; confirm
5. search for a borrower and include categorycode/branchcode filters
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I confirm all working tests 1-5
1. Created patron with blank birthdate - birthdate was blank
2. Searched for patron "henry james acevedo III" by using "acevedo" - result was correct
3. Searched for mr. acevedo using "Acevedo III" - result was correct
4. Searched for Henry James Acevedo III, Henry Acevedo and James Acevedo - results were correct
5. Searched for Mr Acevedo with the branch he was not in, with the branch he is in, with a category he was not, and a category he was. All results were correct.
also noted: inner searching seems to be working now? Example: Henry James (firstname) Acevedo III (surname) - searching James Acevedo brings back the correct patron.
Not complaining, just noting. :)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A javascript error could occur if the CloneSubfield function failed for
any reason. This would prevent the popup from disappearing.
Example : Importing informations of a UNIF_TITLE authority with multiple
$x subfields in the biblio's 440 field. 440$x isn't repeatable, so an
error occurs when trying to clone it.
http://bugs.koha-community.org/show_bug.cgi?id=6977 Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 6475 - Edit it's not possible in subfield "0" in MARC framework
When trying to modify the subfield "0" on a field in the
MARC subfield structure admin -> Tag xxx Subfield Constraints,
the boolean condition on liblibrarian fails for the initial "0" value.
Modified condition to allow the value "0"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Liz Rea [Mon, 24 Oct 2011 20:26:32 +0000 (15:26 -0500)]
Bug 7084 - Re-arranging results_summary for tags so that it applies where it is supposed to
To test:
Verify that New Tag text is the same size as all of the other surrounding text.
Verify that it is consistent in size with results that have existing tags.
See screenshot for what it looked like before:
http://screencast.com/t/hnt15kpS7SH9
Notice that the Add button and New tag text were slightly larger than the
similar constructions for results with existing tags. This patch should fix
that.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I made sure I had a results list with on record with tags and one without.
Before applying the patch the "New tag" text and "Add" button were
inconsistent for the two records, after applying it they look the same. Nice!
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
A) Do a full installation with German sample files
B) Run the sql file 'system_preferences.sql' against your database
Verfy values of system preferences have been changed.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Patch applied cleanly. I ran through the webinstaller in German on an empty
database, and made sure system_preferences were loaded. No complaints from
the database and the systprefs are set to the right values when I check in the
staff client.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- apply patch
- update po files using 'perl translate update <language-code>
- check po files for new strings from 007 plugin
- translate some / all of them
- update templates with changed po files 'perl translate install <language-code>
- verify 007 still works and got translated
Robin Sheat [Fri, 16 Jul 2010 02:45:58 +0000 (14:45 +1200)]
Bug 6916 - item's acq date now takes you to its invoice
When viewing an item's details, selecting the accession date for it now
takes you to the invoice for that item.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as advertised.
1) Order and receive an item in acquisition
2) Search for it in staff and go to the 'items' tab
3) Click on the 'receive date' link
Fixed conflict in moredetail.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
QA. This patch does only work when AcqCreateItem==placing an order. This is caused by an existing bug. See Bugzilla for more details.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Frédéric Demians [Fri, 13 May 2011 10:33:58 +0000 (11:33 +0100)]
Bug 6321 Add a 1/4 months frequency
Thanks Stefano Bargioni for the typo fix
[2011.09.16] Thanks Paul for catching the display error.
[2011.10.11] Thanks Katrin for finding display error on OPAC.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested prediction pattern and display in OPAC.
No problems found.
Katrin Fischer [Mon, 24 Oct 2011 15:48:29 +0000 (17:48 +0200)]
Bug 4161: Preselect active currency for new vendors
Currently when creating a new vendor in acquisitions the alphabetical first
currency will be preselected. For better usability and less mistakes the
active curency should be preselected.
To test:
Check your currency settings in administration.
Your active currency should not be the first in the list.
1) Create a new vendor
Verify the active currency is selected for list and invoice prices.
2) Check vendor summary page
Verify the correct currencies from the vendor record are shown here.
3) Edit vendor
Verify the correct currencies from the vendor record are shown here.
Signed-off-by: Liz Rea <lrea@nekls.org>
Verified with tests 1, 2, and 3.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Fri, 4 Nov 2011 10:26:01 +0000 (06:26 -0400)]
Bug 5945: email not searchable in patron search
Adds 'email' to valid search parameters in members/member.pl
To test:
1. give a patron a unique email address in your test database
2. search on the full email; should work
3. search on the part of the email before the domain; should work
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Katrin Fischer [Wed, 2 Nov 2011 23:44:36 +0000 (00:44 +0100)]
Bug 7138: Can't print basket group order pdf
PDF print of basket groups is broken.
To test:
1) Make sure OrderPdfFormat is set to pdfformat::layout2pages or pdfformat::layout3pages
2) Create a basket with orders
3) Close the basket and create a basket group checking the checkbox
4) Print the basket group as PDF
Before patch the file is broken and when opened in an editor contains an error message.
After the patch the PDF should be generated correctly again.
Thx to Chris for helping me to fix the problem.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Chris Cormack [Wed, 2 Nov 2011 03:13:20 +0000 (16:13 +1300)]
Bug 6679 : Don't declare variables in conditionals Don't change $_ in a list context http://search.cpan.org/~elliotjs/Perl-Critic-1.116/lib/Perl/Critic/Policy/ControlStructures/ProhibitMutatingListFunctions.pm
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Tue, 18 Oct 2011 20:13:15 +0000 (16:13 -0400)]
Bug 6390 Followup: Basket's authorisedby might not be a borrowernumber
aqbasket.authorisedby is not foreign key constrainted to borrowers.borrowernumber,
so if it's anything other than that, vendor search breaks by using an undefined value
(GetMember() on an invalid borrowernumber) as a HASH ref.
This patch sets the branchcode (the desired value from GetMember) to a blank value, then only
changes it if GetMember is defined. In the case where the authorisedby librarian has been deleted,
or the value is otherwise invalid, and AcqViewBaskets is set to 'branch', the basket will not appear
except to superlibrarians
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Invalid borrowernumber in aqbasket.authorisedby no longer breaks search.
Paul Poulain [Fri, 16 Sep 2011 22:58:41 +0000 (00:58 +0200)]
Bug 7188: C4::Context::db_scheme2dbi does case-insensitive grep
Checking NYTProf in C4::Context, it appears that the /i flag is highly time-consumming
As we don't support anything outside from mysql, returning directly mysql directly
If in a future version PostgresSQL works, then we will have to update this sub. But if an ORM is introduced, this code will be removed completly anyway
Testing note:
Drops execution time of the line from 300ms to 20 microseconds (in my testing).
Paul Poulain [Sun, 6 Nov 2011 08:36:52 +0000 (09:36 +0100)]
Bug 7184 raise mySQL error if debug is set
Before this patch, if a mySQL occured in Koha (any error), then the user was seeing nothing.
With this patch, if DEBUG is set in Koha VirtualHost, any mySQL error will make Koha die and display the SQL error
Step to test:
=== BEFORE PATCH ===
go anywhere, and change a mySQL statement to make it invalid.
Launch a page using the SQL you've made wrong, you'll see nothing, except you won't see the expected results
=== AFTER PATCH ===
Modify koha-httpd.conf, and add the following line, in the virtualhost (if it does not already exist)
SetEnv DEBUG 1
restart/reload Apache
Launch the same page, you'll get a Perl statement saying something like:
DBD::mysql::st execute failed: <<blablabla SQL error>> at <<where the error was raised line <<error line>>
Katrin Fischer [Mon, 24 Oct 2011 18:59:57 +0000 (20:59 +0200)]
Bug 6994: Wrong 'no budget defined' alert
When ordering from an existing record the 'no budgets and funds defined' error
message was shown below the result list.
To test:
A) No budgets defined for this user and library
Basket summary page shows a warning instead of the link for creation
of orders.
B) Budgets and funds are properly defined for this user and library
Basket summary page shows links for order creation.
Before patch: A search for an existing record had the alert at the bottom
of the search result list.
After patch: The links for creation of orders are shown instead.
Signed-off-by: Liz Rea <lrea@nekls.org>
Verified A and B.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Notify the user on his account page when his account is almost expired
New feature : If the "NotifyBorrowerDeparture" system preference is defined, a
notification appears in the user's account page if his subscription is almost
expired.
http://bugs.koha-community.org/show_bug.cgi?id=6978 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
works perfectly with date formatted DD/MM/YYYY as well
Owen Leonard [Tue, 25 Oct 2011 14:16:02 +0000 (10:16 -0400)]
Fix for Bug 7085 - Problems with searching for orders in acquisitions
Changing "if ( defined $input )" to "if ( $input )" in the section
of the script which builds the order search query seems to give
successful searches where they didn't exist before. Searches from
the advanced order search screen work with title, author, vendor,
basket number, date, etc.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Searches for date ranges, title and author keywords give
me the correct results now.
projects / koha.git / log