Janusz Kaczmarek [Wed, 17 Apr 2024 11:17:22 +0000 (11:17 +0000)]
Bug 36620: Broken order management for suggestions with quantity
Test plan
=========
Scenario A (the bug)
--------------------
1. In OPAC, create a purchase suggestion with defined quantity
("Copies" in staff interface).
2. Accept the suggestion.
2. Have a budget, fund, vendor etc. to use the Acquisitions module.
Ensure that AcqCreateItem syspref is set to 'placing an order'.
3. Create a new basket and add to basket an order line from accepted
suggestion. Note the initial Quantity set to the quantity entered
in suggestion. Note increasing this number while you add items
to the order with the 'Add item' button. Save the order, close the
basket.
4. Start receiving shipments for this order (create invoice etc.).
Receive items you created by 'Add item' until there is nothing more
to receive. Note the number of unreecived items in the order (eqal
to the initial quantity from the suggestion) that cannot be regulary
received (with the items table on the left). This is the *bug*.
[This is due to the ambiguity of $data->{quantity} in the neworderempty.pl
-- it normally comes from the order: GetOrder, but in the case of a yet
empty order created from a suggestion, it comes from the suggestions table:
GetSuggestion].
5. Apply the patch, restart plack etc.
6. Repeat step 2 and 3. While adding items in order note that you start
from quantity 0, and that the suggested quantity is shown in brackets.
7. Continue with p. 4. You should be able to receive the order in the
regular way (with the items created).
Scenario B (bonus)
------------------
Repeat the above with AcqCreateItem syspref is set to 'receiving the order',
or 'cataloging the record'. These cases do not create a bug as it does
the case with 'placing an order'. Note however, after applying the patch,
the initial quantity in the order is set to 0 and there is the bonus infomation
about the suggested number of items (from the suggestion).
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matthias Le Gac [Mon, 18 Mar 2024 18:05:15 +0000 (14:05 -0400)]
Bug 35836: change | by , for the print
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matthias Le Gac [Thu, 22 Feb 2024 19:26:24 +0000 (14:26 -0500)]
Bug 35836: search_for_data_inconsistencies.pl - Search for loops in dependencies
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36819: Default layout data prints squished barcodes
This patch changes the default layout data for the barcode
width.
To test:
**On a fresh db**
1. Go to Cataloging > Label creator
2. Click New > Label batch
3. Enter the following barcodes in the text field (or enter your own)
4. Click Add items
5. Click Export full batch
6. Choose the following
- Template: Avery 5160 | 1 x 2-5/8
- Layout: Label test
7. Click Export
8. Click Download as PDF
9. Open the PDF
--> Note the squished barcodes
10. Apply patch and reset_all
11. Redo steps 1 to 9
--> Note the barcodes now look OK
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 25 Mar 2024 10:26:10 +0000 (10:26 +0000)]
Bug 36414: OPAC - Skip csrf_token
Skip csrf_token field if it already exists and
is coming from a previous workflow stage form
submission, as it's already included at the
start of the form.
The test plan requires EDS credentials in order to be followed.
I'm available to help others through this test plan if required.
Otherwise, I believe the code is simple enough to understand
and follow what it's fixing without testing.
Test plan:
1) Install an ILL availabililty plugin, e.g.:
https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds
3) Configure the plugin and add EDS credentials
4) Enable ILLCheckAvailability sys pref
5) Enable ILLModuleDisclaimerByType by copying the example YAML block in the sys pref description
6) Create a new ILL request of type 'Book' and add a DOI
7) You should now be on the availabililty stage, click 'Continue adding your request'
8) You should now be on the type disclaimer stage, click 'Create'
9) Notice 'Wrong CSRF token' error.
This happens because the type disclaimer stage is adding its own CSRF token in addition
to the CSRF token coming from the previous availabililty stage
10) Apply patch. Repeat. No error -> Request is created as expected.
11) Do the same test plan on both Staff UI and OPAC
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 25 Mar 2024 10:23:37 +0000 (10:23 +0000)]
Bug 36414: Staff UI - Skip csrf_token
Skip csrf_token field if it already exists and
is coming from a previous workflow stage form
submission, as it's already included at the
start of the form.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Wed, 27 Mar 2024 13:18:21 +0000 (13:18 +0000)]
Bug 28869: (follow-up) Switch to cud-edit_category for CSRF
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Tue, 30 Jan 2024 13:53:05 +0000 (13:53 +0000)]
Bug 28869: Unit tests
Test plan:
Run t/db_dependent/AuthorisedValues.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 5 Feb 2024 09:34:49 +0000 (09:34 +0000)]
Bug 28869: (follow-up) Add html restriction for tinyint
Several item fields are signed tinyints, connected to
authorised value categories like NOT_LOAN etc. They only
accept -128 up to 127.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Add category with/without integer restriction.
Test adding/editing values.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Tue, 30 Jan 2024 14:08:09 +0000 (14:08 +0000)]
Bug 28869: Database revision
Test plan:
Run updatedatabase.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 15 May 2024 11:51:54 +0000 (11:51 +0000)]
Bug 36844: (QA follow-up) Fix preselected options on set-library.pl
I found that when switching from a branch with a default register to one without, the default register for
the last branch was remaining selected (though disabled)
When opening the page if no desk was set (choose 'My library' on initial login) the branch was default to 'No desk' rather than defaulting to the first desk of the current branch
Remove a debugging line as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 13 May 2024 16:53:39 +0000 (16:53 +0000)]
Bug 36844: Set library, desk, and cash register menu follow-ups
This patch ties up a couple of loose ends which should have been
included in Bug 36582. The patch includes fixes for the staff interface
login page and the cash register statistics page.
To test you should have multiple libraries, desks, and cash registers
defined. You may need to enable the UseCirculationDesks and
UseCashRegisters system preferences.
- Apply the patch and log out of the staff interface.
- On the login form, test that changing your selected library correctly
affects the desk and cash register dropdowns: Only desks and registers
for your selected library should appear.
- Log in and confirm that your selections were submitted correctly.
- Go to Reports, and under "Statistics wizards" choose "Cash register."
- Confirm that changes to the "Transaction library" correctly change the
available options in the "Cash register" dropdown, including the "All"
option.
Sponsored-By: Athens County Public Libraries Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 8 Mar 2024 15:06:11 +0000 (16:06 +0100)]
Bug 36149: Unset userenv from middleware
The userenv (logged in user's info) are stored in
$C4::Context->context->{activeuser}, which persists in plack worker's
memory.
It's really bad in theory as we are not cleaning it before or after the
HTTP request, but only when set_userenv is called (what we are doing
commonly in C4::Auth::get_template_and_user).
If C4::Context->userenv is called before set_userenv we should get undef,
not the userenv from the previous request!
In practice this should not be a problem, but well... who really knows?
This patch suggests to have a middleware to deal with removing the
userenv at the beginning of each request (maybe it should be after, right? - FIXME).
To test:
1 - Edit /etc/koha/sites/kohadev/koha-conf.xml to set <plack_workers>1</plack_workers>
2 - Edit about.pl and add a line after: CGI->new:
warn Data::Dumper::Dumper( C4::Cointext->userenv() );
3 - tail -f /var/log/koha/kohadev/*.log
4 - View about.pl in staff interface, should get a "somethign's wrong" warning
5 - Reload, you get current user info
6 - Open an incognito tab, sign in as a different user and click some stuff
7 - Reload about.pl in other window
8 - You get the opac user info
9 - Apply patch
10 - Edit /etc/koha/sites/kohadev/plack.psgi and add the middleware after "RealIP":
enable "+Koha::Middleware::UserEnv";
11 - Restart all
12 - Reload about.pl - you get a "Something's wrong" warning
13 - Click things in opac on incognito window
14 - Reload about.pl - only "Something's wrong" - you no longer see any user info
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 20 Mar 2024 07:35:29 +0000 (08:35 +0100)]
Bug 19613: Use the 'note' profile
WNC amended patch: tidied
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 5 Apr 2024 06:58:06 +0000 (08:58 +0200)]
Bug 36532: Protect opac-dismiss-message.pl from malicious usages
Really bad design, NEVER retrieve the logged in user from the CGI
param!
See comment 1 for more info
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Thu, 21 Mar 2024 13:30:26 +0000 (09:30 -0400)]
Bug 36382: XSS in showLastPatron dropdown
1) Set borrower surname to:
<script>alert("here comes trouble");</script>
2) Save, nothing happens
3) Enable showLastPatron
4) Reload patron
5) Note the alert popup
6) Apply this patch
7) Reload patron
8) No alert!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jan Kissig [Fri, 3 May 2024 12:11:58 +0000 (14:11 +0200)]
Bug 36772: OPAC Self checkout accepts wrong or partial barcodes
When using the opac trusted checkout feature it is possible to enter non existant or partial barcodes to check out items.
Testplan:
a) set System preference OpacTrustedCheckout to Allow
b) go to http://localhost:8080/ and login with koha / koha
c) click Self Checkout in navigation bar
d) enter barcode 1234
e) result: Item '39999000011234' was checked out
apply patch and reload the page
a) now enter barcode 1234
b) result: Item '1234' not found
c) enter 39999000011234
d) result: Item '39999000011234' was checked out
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emmi Takkinen [Fri, 10 May 2024 05:31:42 +0000 (08:31 +0300)]
Bug 36825: Hide "Protected" field via BorrowerUnwantedField syspref
Setting field "Protected" as hidden in patron entry/modification
form via BorrowerUnwantedField syspref doesn't work. Form is
missing condition "UNLESS noprotected".
To test:
1. From BorrowerUnwantedField, check field "Protected" as hidden.
2. Either attempt to create a new patron or modify existing one.
=> Note that "Protected" is still displayed in the form.
3. Apply this patch.
4. Navigate back to create/modify patron form.
=> Note that "Protected" is no longer displayed.
5. Uncheck field "Protected" from BorrowerUnwantedField.
=> Field should now be displayed in create/modify form.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch makes the XSLT contain HTML tags instead of building them
from scratch with static attribute values. This made it awkward for
translators as CSS classes ended up being extracted for translation
purposes. Plus, there's no need to spend CPU cycles on static content
generation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 18 Apr 2023 19:42:24 +0000 (21:42 +0200)]
Bug 33099: Add missing MARC21 Match authority mappings so "Search all headings" search works
The main entry form of corporate names (110), uniform titles (130), topical
terms (150), geographical names (151), and genre/form (155) are not indexed
with 'Match' search field in Elasticsearch standard mapping. As a result,
the respective records are not present on the result list when performing
an 'All headings' search for the authority records with the main heading form
(MARC 21).
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In Authorities, make an 'All headings' search for a main entry
form from the corporate names, uniform titles, topical terms,
geographical names, or genre/form
--> e.g., in ktd: UK Archiving. You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -a kohadev
3. Repeat the test. You should see 'UK Archiving' on the result list.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Wed, 20 Mar 2024 19:32:50 +0000 (15:32 -0400)]
Bug 36378: Cannot stay logged in if AutoLocation is enabled but branch ip is not set correctly
We can get into a scenario what a user cannot stay logged in for more than a single page load.
If AutoLocation is enabled with branch IP addresses being set to a space, you will be logged out with every page load.
Test Plan:
1) Set your branch ip to a space
2) Enable AutoLocation
3) Restart all the things!
4) Log out
5) Log in
6) Browse to another page
7) You are logged out
8) Apply patch
9) Repeat 1-6
10) You are not logged out!
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 29 Apr 2024 15:18:26 +0000 (15:18 +0000)]
Bug 36708: Fix column index for processing No automatic renewal after
To test:
1- Find or create a circulation rule with a 'Holds allowed (total)' limit of 3 (or another number) and no value in 'No automatic renewal after (hard limit)'
2- Select to edit the rule, and note that 'No automatic renewal after (hard limit)' box in the editing line is now populated with a date
3- Note also that 'Holds allowed (total)' is empty in your editing line
4- If you save your edits without clearing the new 'No automatic renewal after (hard limit)' date, it will save as part of the rule. Also, 'Holds allowed (total)' will save as Unlimited unless you re-add your numerical value.
5- APPLY PATCH
6- Try again, the values should save corrected and not erroneously fill the No automatic renewal after (hard limit) column.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 14 May 2024 12:47:33 +0000 (14:47 +0200)]
Bug 35862: Fix patron_search_form selection
We were no longer getting a match here and so ended up with 2 forms on
the budget page (where we have two modals for patron: owner and users).
Caught be selenium tests patrons_search.t :
Error while executing command: element not interactable: Element <a class="patron_name patron_preview" href="/cgi-bin/koha/circ/circulation.pl?borrowernumber=511"> could not be scrolled into view
It fixes the following UI issues:
When you open a modal, start a search, close the modal
open the other modal search: the results from the other modal were shown
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 13 May 2024 14:03:47 +0000 (14:03 +0000)]
Bug 30047: (follow-up) Fix failing tests
This patch updates the test files to correctly create authorities and/or correctly
mock the needed data for authorities.
the tests in t/db_dependent/Authority/Merge.t cover the case of 'Default' authorities
which don't have valid headings - so I had to add handling for blanking the heading field
when Default type is used.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Mon, 13 May 2024 13:46:03 +0000 (13:46 +0000)]
Bug 36838: Add CSRF token to tags review AJAX requests
The JavaScript for approving or rejecting tags in the staff interface's
tag review interface lacked a CSRF token for the POSTed requests. This
patch adds the token for "approve" and "reject" operations.
To test, apply the patch and clear your browser cache if necessary.
- If necessary, enable tags in system preferences.
- Log in to the OPAC and submit multiple tags on various records.
- In the staff interface, go to Tools -> Tags.
- Test the process of approving and rejecting tags by clicking the
buttons in each row of the table of tags.
- The browser console should show no errors, and the lists of approved
and rejected tags should correctly show the tags you moderated.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
danyonsewell [Fri, 10 May 2024 02:40:45 +0000 (02:40 +0000)]
Bug 36723: Add musical presentation to Elasticsearch index mappings
Testing plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply the patch and restart everything (restart_all).
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Update the visibility for 254$a in the default framework so that it is visible in the Editor (OPAC, Staff interface should already be selected).
7. Add a new record using the default framework and put a term in 254$a, such as 'Full score'.
Sponsored-by: Education Services Australia SCIS Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 6 Mar 2024 18:41:04 +0000 (18:41 +0000)]
Bug 34823: Do not show Item group dropdown if there are no item groups
To test:
1. Enable EnableItemGroups and EnableItemGroupHolds
2. Go to the OPAC and log in as a patron
3. Go to any record that doesn't have grouped items and try to place a hold
4. Click on "Show more options"
5. See "Request specific item group:" and dropdown
6. APPLY PATCH
7. Try again, this time if the record has no item groups you should not see the dropdown at all.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36440: Add edit buttons for patron flags in attention box
Add edit buttons for patron flags in attention box and show
flag status in detail view
To test:
1) Go to patron details for a patron with address in
doubt and card lost flags set and verify these are
highlighted under "Library use" and the patron messages
has edit buttons that links to the modfiy patron page.
Sponsored-by: Gothenburg University Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Laura Escamilla [Thu, 4 Apr 2024 12:31:59 +0000 (12:31 +0000)]
Bug 26654: Added item number column to item search
Test plan:
1. Apply patch
2. Do an item search and notice the column containing the item number
Signed-off-by: Michelle Spinney <mspinney@clamsnet.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:22:42 +0000 (12:22 +0200)]
Bug 29948: Remove margin bottom for paragraph
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 6 May 2024 10:18:55 +0000 (12:18 +0200)]
Bug 29948: Hide entry if empty
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Mon, 6 May 2024 06:48:28 +0000 (06:48 +0000)]
Bug 29948: (follow-up) Update system preference description and heading
This follow-up:
1. Updates the OPACAuthorIdentifiersAndInformation system preference
description.
2. Changes the OPAC heading used on the bibliographic record and
authority record detail pages from "Author identifiers/information"
to "Author information". Identfiers are a subset of author information
and having just "Author information" is sufficient. In addition,
the authority record doesn't have to include identifiers.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 11:46:21 +0000 (12:46 +0100)]
Bug 29948: Fix display of selected values
The values were correctly inserted but the display was not sorting
correctly
Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 14 Mar 2024 09:40:29 +0000 (10:40 +0100)]
Bug 29948: Allow to sort info
With this patch the different info can be ordered when editing the
syspref
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 14 Mar 2024 08:58:05 +0000 (09:58 +0100)]
Bug 29948: OPACAuthorIdentifiersAndInformation
This patch merge the previous patch attempt with the existing OPACAuthorIdentifiers syspref.
It creates a new syspref OPACAuthorIdentifiersAndInformation and remove
OPACAuthorIdentifiers.
"identifiers" become an entry of the new syspref.
Test plan:
Select some entries in OPACAuthorIdentifiersAndInformation
Edit an authority record and enter data in the corresponding subfield
(the list is on the syspref entry)
Go to the biblio detail page or the authority detail page at the OPAC
and notice that the info you selected are correctly displayed.
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 13 Mar 2024 15:07:47 +0000 (16:07 +0100)]
Bug 29948: Display authors information along with the identifiers
Sponsored-by: Orex Digital Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 10 May 2024 13:13:20 +0000 (13:13 +0000)]
Bug 36827: Fix tab formatting
This patch removes unwanted whitespace between the tabs and the tab content
Test plan:
1) Enable the ERM module and navigate to the eUsage > Reports sections
2) Observe the whitespace between the tabs and the content
3) Apply patch and run yarn build
4) Hard refresh the page, the whitespace should be gone
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 10 May 2024 13:18:45 +0000 (13:18 +0000)]
Bug 36828: Remove commented out code
Test plan:
1) Look at the patch diff and observe that the commented out code has been removed
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Wed, 20 Mar 2024 15:04:14 +0000 (16:04 +0100)]
Bug 36370: Add ContentWarningField to UNIMARC XSLT
Bug 31123 added new feature with preference ContentWarningField.
Add this behavior to UNMARC XSLT files.
This patch adds new template 'tag_content_warning' in UNIMARCslimUtils.xsl
called in results and details pages.
New field is placed after 3xx.
Test plan (in both interfaces OPAC and staff):
1) Create a new field 599 in framework
2) Set system preference ContentWarningField to 599
3) Edit a record to add a 599 with text in $a$b and an URL in $u
4) Perform a search to find this record
=> Check you see content_warning: <a href="$u">$a</a> $b
5) Click on details page
=> Check you see content_warning: <a href="$u">$a</a> $b
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 6 Mar 2024 16:24:25 +0000 (16:24 +0000)]
Bug 36373: Show existing bookings in the datepicker
This patch exposes existing bookings as info dots in the flatpickr
Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
danyonsewell [Fri, 15 Mar 2024 01:21:53 +0000 (01:21 +0000)]
Bug 36325: Add option to koha-run-backups/koha-dump, to exclude logs
Written patch to add flag to both koha-dump and koha-run-backups.
Test plan:
1. do a sudo koha-dump and sudo koha-run-backups and check the contents of the .tar.gz backup in /var/spool/koha/instance/ and verify logs are in there
2. apply this patch
3. this time do sudo koha-dump --exclude-logs and sudo koha-run-backups --exclude-logs and check the contents of the .tar.gz backup in /var/spool/koha/instance and verify nothing from /var/log/koha is in there.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 16 Jan 2024 12:18:48 +0000 (12:18 +0000)]
Bug 35813: (follow-up) Correct dialog class and clean up whitespace
This patch changes the class of the success message from "success"
(which is a Bootstrap class) to "message" which is the class we use
elsewhere in Koha for this kind of informational message.
The patch adds the same dialog markup to labeledMARCdetail.tt.
The patch also trims trailing whitespace from place_booking_modal.js
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Mon, 15 Jan 2024 16:45:03 +0000 (16:45 +0000)]
Bug 35813: Add success feedback after placing/editing bookings
This patch restores the lost behaviour that a successful add/edit of a
booking via the 'Place booking' modal should notify the end user that
the submission was sucessful.
Test plan
1) Set an item as bookable to expose the 'Place booking' button
2) Place a new booking from the following pages and confirm that you
now recieve feedback.
* Catalog > Title > Details
* Catalog > Title > MARC details
* Catalog > Title > ISBD details
* Catalog > Title > Item details
* Catalog > Title > Bookings
3) Edit a booking on the 'Catalog > Title > Bookings' page and confirm
you now recieve feedback.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36794: Illegitimate modification of biblionumber subfield content (999 $c)
It happens that librarians, by mistake, open a biblio editor putting in the
URL, by hand, the biblionumber prefixed with a blank (e.g.
.../addbiblio.pl?biblionumber= 123 -- mind the space before 123).
In such a case the editor opens with the right biblio record (i.e. 123)
but, after saving the record, the content of the biblionumber MARC
field (999 $c for a standard MARC 21 installation) results modified and
contains additional initial blanks.
Moreover, while using ES and making a search for the record (with title,
author etc.) we get two records on the result list (instead of one).
This is because in the addbiblio.pl script $biblionumber is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction.
Test plan:
==========
0. Have a test installation with ES.
1. Open a biblio record in the editor with an added space before
biblionumber value, e.g.:
http://ktd:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber= 123
Save the record.
2. From the Normal view choose Save -> MARCXML. Open the saved file in
your favourite editor. You should see, at the end, something like:
<datafield tag="999" ind1=" " ind2=" ">
<subfield code="c"> 123</subfield>
(mind the space before 123).
This is not right.
3. Make a search with the title or author's name from the record (e.g.
Henning Mankell for the record 123 from the default ktd data set).
You should get two records instead of one (while using ES).
4. Apply the patch, restart_all. Repeat p. 1 and 2 with a different
biblionumber. Notice the unchanged (i.e. without spaces) value
of 999 $c subfield in the exported record and only one record
as a result of a search.
WNC amended patch - rebased, added conditional in case no bib, moved comments to their own lines
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36799: Illegitimate modification of MARC authid field content (001)
It happens that librarians to save time open an authority editor by putting
in the URL, by hand, the authid prefixed, by mistake, with a blank (e.g.
.../authorities.pl?authid= 100 -- mind the space before 100). In
such a case the editor opens with the right auth record (i.e. 100) but,
after saving the record, the content of the authid MARC field (001 for
a standard MARC 21 installation) results modified and contains
additional initial blanks.
Moreover, if the heading (1XX field) was modified in the authority record
during such an edit, the changes will not propagate to the linked
bibliographic records. And won't in the future.
This is because in the authorities.pl script $authid is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction (line 540 in the current main branch).
Test plan:
==========
1. Open an auth record in the editor with an added space before
authid value, e.g.:
http://ktd:8081/cgi-bin/koha/authorities/detail.pl?authid= 100
Modify the heading field -- in the ktd data set:
150 Computerized typesetting
Save the record.
2. a) Open the record for editing again--see the space added before
the authid in field 001. Close the editor (with Cancel).
b) Try to go to the linked biblio records with Used in X records.
Note no results, if using ES.
c) Remove the space before authid (after an:) in the URL.
Go to the linked biblio records. See that the content of
the field controlled by the modified auth record did not
update.
3. Apply the patch; restart_all.
4. Repeat p. 1 and 2 with a different authid. Everything should
be OK now.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 33849: Do not reset new patrons home library when error occurs
While adding new patron, if patron is flagged as duplicate
or another error occurs and their home library differs from
library user is logged in, patrons home library resets as
logged in users library. This happens with all patrons
expect those with category type C. This patch removes checking
if patrons category type is C from code so that all category
types use previously chosen home library even if error occurs.
To test:
1. Add new patron and set their library to a different
library than the one you're logged in.
2. Cause an error (wrong age, duplicate etc) while saving.
3. Attempt to save.
=> Note that patrons home library is set as one you're
logged in.
4. Apply this patch.
5. Repeat steps 1 to 3.
=> Note that patrons home library hasn't changed.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35149: Add Option to ignore submit of checkout field when empty
1) Apply patch
2) Set CircAutoPrintQuickSlip to "do nothing"
3) Go to the checkouts form for a specific patron
4) Submit the form with empty value
5) Verify that no action is taken and you stay on the current page
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 7 May 2024 16:03:54 +0000 (16:03 +0000)]
Bug 36797: Change WHILE loop into FOREACH
To test:
1. Find a record that has 1000 non-waiting holds with different priorities.
2. Try loading the reserve page for that record ( /reserve/request.pl?biblionumber=X )
3. Error: Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
4. APPLY PATCH
5. Try again, this time the page should load.
6. Try testing on a record with less than 1000 holds, making sure the priorities are still set right.
7. Make sure you can change your priorities and everything works right.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 10 May 2024 18:01:59 +0000 (14:01 -0400)]
Bug 36832: (bug 36791 follow-up) Allow authid=0
To test:
1. Go to the Authorities module and do a Z39.50 search that will return
results (e.g. a general subject heading)
2. Import an authority record from the results
--> Confirm that the record is imported into the editor
3. Authorities > New, replace it via Z39.50, confirm it's imported
4. Authorities > New, fill the required fields, confirm it saves
5. Edit an existing authority, replace it via Z39.50, confirm it saves
6. Edit an existing authority, replace authid=nn in the URL with a
number that doesn't exist like 1000000, confirm you get a 404 page
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Mon, 29 Jan 2024 09:08:00 +0000 (10:08 +0100)]
Bug 35927: Selecting MARC framework again doesn't work when adding to basket from an external source
Like Bug 19372, selecting MARC framework currently doesn't work when adding to basket from an external source.
Strangly I can reproduce on koha-testing-docker, but we have this issue with a Ubuntu Focal install.
Looks like it comes from a bad syntaxe than needs to be replaced in any case.
Test plan:
1) Add an order to a basket from an external source
2) Select another framework than the default one on the search result
view. Before doing 'add order' on choosen search result line.
3) Chek the framework code you will pick will be used in the created biblio record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Mon, 6 May 2024 16:04:39 +0000 (12:04 -0400)]
Bug 36735: (follow-up) Fix TT filters and add a comment
holds_table.inc depends on form-submit.js, but importing the asset
directly breaks the script. Add a comment stating that any script that
imports holds_table.inc must import form-submit.js too.
Also change uri filters to html
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Update the revert hold button to use the new include for submitting
forms from link data with a POST request
To test:
1. Place a hold on a biblio record
2. Check an item in to fill the hold
3. On the holds tab for the biblio record, click the "Revert waiting
status" button for that hold
--> The page reloads but the hold is still waiting
4. Apply patchset
5. Click to another page and then return to the holds tab (we don't want
to refresh the page and resend the request)
6. Click the "Revert waiting status" button for that hold
--> The hold should be reverted to pending status
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Liz Rea [Fri, 16 Jun 2023 17:50:35 +0000 (12:50 -0500)]
Bug 34041: z3950 responder additional options not coming through properly
This patch adds the <config> node that the z3950 responder starter script is looking for in the z3950/config.xml to the example code.
To test:
- verify that the <config> </config> is around the commented z3950_additional_options suggestion in the etc/z3950/config.xml file
- copy the config stanza to the live file: /etc/koha/sites/kohadev/z3950/config.xml
- restart_all
- ps aux | grep z3950
- confirm the script has restarted
- confirm the options: --add-item-status k -t 5 have been passed through
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 10 May 2024 14:14:59 +0000 (14:14 +0000)]
Bug 36830: Update delete -> cud-delete
1) Visit <staff_url>/cgi-bin/koha/tools/holidays.pl
2) Select "Holiday only on this day" (or whatever other option to add an holiday). Click 'Save.
3) Now click on that day in the calendar, pick "delete this holiday". Click 'Save'. Notice the holiday is still there.
4) Apply patch. Repeat. Notice its deleted.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Sun, 18 Feb 2024 17:25:33 +0000 (17:25 +0000)]
Bug 33737: Fix undefined variable issues
This patch resolves the undefined bookings_table variable issue reported
and also further fixes a subsequent undefined timeline bug that was
exposed by the original fix.
Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 7 Dec 2021 14:38:06 +0000 (14:38 +0000)]
Bug 33737: Add bookings tab to patron details
This patch adds a new 'bookings' tab to the bottom of the members
details pages. When a patron has any future or current bookings against
their record the tab will display the number of bookings in the tab name
and on clicking the tab a bookings table will display the current and
upcoming bookings.
Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Fri, 10 May 2024 08:37:32 +0000 (08:37 +0000)]
Bug 35994: (QA follow-up) Fix Biblio.t
A follow-up changed orders->cancel a bit. This test assumed to
cancel completed lines here. So we are doing it now with a
direct update to have the original result.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 22 Feb 2024 12:48:55 +0000 (12:48 +0000)]
Bug 35994: Add $biblio->acq_status
This allows you to see quickly if a biblio has linked orders or not.
And if they are all cancelled, or some still in processing, or some
are complete (and the rest cancelled).
Test plan:
Run t/db_dependent/Koha/Biblio.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:24:25 +0000 (14:24 +0000)]
Bug 30047: Unit tests
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:20:19 +0000 (14:20 +0000)]
Bug 30047: Add new heading field to auth_header table
This patch adds a new heading field containing the display form of the authority record
NOTE: If trying to save an auhority in the 'DEFAULT' framework, you will get an error, you should not be
using DEFAULT for authorities and we should remove from the list on another bug
To test:
1 - Apply patches
2 - Update database
3 - Restart all
4 - Create a new authority, save.
5 - Do this for various types
6 - View the db records:
SELECT * FROM auth_header\G
7 - Note new heading field is populated correctly
8 - Edit your new authorities
9 - Confirm the heading field is updated correctly
10 - Import some authorities and confirm heading generated correctly
11 - Import auth via Z39.50 and confirm heading generated correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 19 Jan 2024 14:19:32 +0000 (14:19 +0000)]
Bug 30047: DB Updates
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 5 Apr 2023 12:49:59 +0000 (12:49 +0000)]
Bug 33418: Add overlay_framework option to connexion scripts
This patch adds the option to specify a framework to be used when overlaying records from webservices/connexion
To test:
1 - vim /etc/koha/sites/kohadev/connexion.cnf
2 - Set content:
host:
port: 8888
koha:http://localhost:8081
log:/var/log/koha/kohadev/connexion.log
match:ISBN
user:kohauser
password:kohapass
overlay_action:replace
nomatch_action:create_new
item_action:always_add
import_mode:direct
framework:BKS
overlay_framework:
debug:1
3 - Save the sample file from this bug into your kohaclone (or copy and paste into a file your koha test site can reach)
4 - On the command line:
perl misc/bin/connexion_import_daemon.pl -c /etc/koha/sites/kohadev/connexion.cnf
5 - In another terminal:
cat bug_33418.test | nc -v localhost 8888
6 - It should report success and a biblionumber
7 - In Koha: Cataloguing->Manage staged MARC record
8 - View the most recent batch with file name (webservice)
9 - Confirm it was imported, no match
10 - Click 'View' under the 'Record' column
11 - Confirm record loads correctly and 'MARC framework' detail is 'Books, Booklets, Workbooks'
12 - On the terminal repeat the command:
cat bug_33418.test | nc -v localhost 8888
13 - It should succed
14 - View the new batch, confirm the record matched this time
15 - View the record details, confirm framework is now 'default'
16 - On the first terminal hit Ctrl+C to stop the daemon
16 - Edit connexion.cnf and change:
import_mode:stage
framework:ACQ
overlay_framework:IR
17 - Restart daemon:
perl misc/bin/connexion_import_daemon.pl -c /etc/koha/sites/kohadev/connexion.cnf
18 - Delete the record created above
19 - On the second terminal repeat the command:
cat bug_33418.test | nc -v localhost 8888
20 - Confirm the batch is created, but not imported
21 - In terminal:
perl misc/cronjobs/import_webservice_batch.pl --framework=ACQ --overlay_framework=BKS
22 - Confirm batch imported, and record in ACQ framework
23 - In terminal:
cat bug_33418.test | nc -v localhost 8888
perl misc/cronjobs/import_webservice_batch.pl --framework=ACQ --overlay_framework=BKS
24 - Confirm batch added, record matched, record imported, and record now in Books framework
25 - Stop the deamon, edit connexion.cnf:
import_mode:direct
26 - Start the daemon, and on other terminal repeat:
cat bug_33418.test | nc -v localhost 8888
27 - Confirm record in Binders framework
28 - Set record framework to Books
29 - Stop daemon, edit cnf and remove 'overlay_framework' setting
30 - Start daemon and cat the file again
31 - Confirm the record remains in Books framework
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log