Marcel de Rooy [Mon, 21 Jun 2021 08:47:59 +0000 (08:47 +0000)]
Bug 28581: (QA follow-up) Fix method on unblessed reference
Speaks for itself.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 17 Jun 2021 13:47:07 +0000 (14:47 +0100)]
Bug 28581: Enhance POD for EnqueueLetter
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 17 Jun 2021 13:30:59 +0000 (14:30 +0100)]
Bug 28581: Use 'from_email_address' where appropriate
This patch replaces a few more trivial cases where we were using
library->branchemail with a fallback to KohaAdminEmail to just use the
new library->from_email_address method directly instead.
There were also a couple of cases where we were passing borrowernumber
and the patrons library from address too.. this is unneccesary as the
code in _send_email_massage will already default to patron library from
address if we do not pass an override.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a semicolon.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 17 Jun 2021 13:12:23 +0000 (14:12 +0100)]
Bug 28581: (QA follow-up) Prevent code failure
This patch prevents a fatal error when both $params->{from} and
$params->{borrowernumber} are undefined. We fallback to
KohaAdminEmailAddress before finally falling through to setting a
failure status for the message if that last fallback is not found.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 17 Jun 2021 09:59:18 +0000 (09:59 +0000)]
Bug 28581: Use from_email_address in the codebase
Adding only a few (trivial) cases now. Changes in C4::Letters
are not trivial after all..
We now add the KohaAdminEmail fallback implicitly when the from
address was still empty. The extra check makes us not rely on
a do or die action in Email::Stuffer.
Test plan:
Run password recovery or membership expiry cron.
Check sender address.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 17 Jun 2021 08:54:46 +0000 (09:54 +0100)]
Bug 28581: Add 'from_email_address' method and use in Koha::Patron
This patch adds a new 'from_email_address' method to Koha::Library to
return the appropriate email address to use as the 'from' field for
email notices from the library.
We then update Koha::Patron->queue_notice to use this new method instead
of the incorrect inbound_email_address.
I also update the POD for inbound_email_address to clarify it's use
case.
Test plan
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lucas Gass [Wed, 12 May 2021 18:20:16 +0000 (18:20 +0000)]
Bug 26205: Add logging of news items
To test:
1. Apply patch, updatedatabase, restart_all
2. Make sure the system pref 'NewsLog' is turned on.
3. Go to the Koha News tool and create a new news item.
4. View the logs and display only the OPAC News module
5. You should see your new news, it will include the lang (
OPACheader_en ) and the content of the news item.
6. Filter the logs so the only action is 'Add', your new news item
should appear
7. Modify some news items
8. They should appear in the logs now as modification.
9. Make sure you can filter the action to 'Modify' and can confirm it
works
10. Delete some news items
11. They should appear in the logs now as deletinon
12. Make sure you can filter the action to 'Delete' and can confirm it
works
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 4 Jun 2021 13:36:59 +0000 (15:36 +0200)]
Bug 28516: Prevent failures if borrower_attribute_types.mandatory=1
TestBuilder will generate an integer for the
Koha::Patron::Attribute::Type object, but if 1 is picked some tests are
failing randomly
At least t/db_dependent/Koha/Patrons.t and t/db_dependent/Koha/Patrons/Import.t
The expection "Missing mandatory extended attribute" is raised when the
patron is stored.
Test plan:
The following script should return 0 when the patch is applied:
"""
use t::lib::TestBuilder;
my $builder = t::lib::TestBuilder->new;
my $x = $builder->build_object(
{
class => 'Koha::Patron::Attribute::Types',
}
);
say $x->mandatory;
"""
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28598: Update DateFormat and TimeFormat descriptions to remove warnings
To test, confirm that the warnings are present without the patch and gone with it.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Jun 2021 13:24:31 +0000 (15:24 +0200)]
Bug 28570: Remove log to /tmp file from bor_issues_top.pl
This is unusual and must not be done.
Removing it.
Test plan:
Use the "Home > Reports > Patrons with the most checkouts" report and
confirm that it is working correctly after you applied this patch
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28242: added captions to tables and legends to forms
Ensured that in the OPAC, all tables have relevant captions and all forms have relevant legends.
Many of these have class="sr-only" so they are not visible but will be
available for people who use screen-readers.
To test:
1) Go to OPAC
2) Apply patch and dependencies
3) Check that on all pages, any tables have a caption (many of them will
not be visible, but will be in the markup code)
4) Check that on all pages, any forms have a legend (many of them will
not be visible, but will be in the markup code)
5) Check that the captions are appropriate and relevant
6) Check that the legends are appropriate and relevant
Sponsored-by: Catalyst IT Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 21 May 2021 18:10:14 +0000 (18:10 +0000)]
Bug 28418: Show template_id of MARC modification templates
This patch adds an "id" column to the table of MARC modification
templates. The table is now a DataTable with table settings, with the
new column hidden by default to preserve the existing configuration.
To test, apply the patch and restart services.
- Go to Administration -> MARC modification templates.
- If necessary, add two or more templates.
- Confirm that table of templates displays as a DataTable, with all
associated sorting, filtering, export, etc.
- The "id" column should be hidden by default.
- Confirm that column visibility controls work correctly.
- Confirm that the table settings found under Administration -> Table
settings work correctly to set the default visibility of the table
columns.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sun, 21 Mar 2021 13:11:25 +0000 (13:11 +0000)]
Bug 27498: (follow-up) Update to display logic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Amit Gupta <amitddng135@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 3 Feb 2021 12:04:31 +0000 (12:04 +0000)]
Bug 27498: Add a link for the Hold Ratios to Acquisitions home page
This patch adds a link to the hold ratios report in the Acquisitions
sidebar menu under the "reports" heading.
To test, apply the patch and go to Acquisitions. The link to the hold
ratios report should be there and it should work correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Amit Gupta <amitddng135@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 15:30:31 +0000 (16:30 +0100)]
Bug 27600: Remove password check from `add_hold`
As suggested in the bugzilla comments, the add_hold method also
doesn't require the password checking code.
Test plan
1/ Run t/db_dependent/SIP/ILS.t and watch it pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 15:09:17 +0000 (16:09 +0100)]
Bug 27600: Remove password check from `cancel_hold`
As suggested in the bugzilla comments, the cancel_hold method also
doesn't require the password checking code.
Test plan
1/ Run t/db_dependent/SIP/ILS.t and watch it pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Wed, 3 Feb 2021 10:03:31 +0000 (10:03 +0000)]
Bug 27600: Remove password check from SIP2 `renew_all`
This patch removes the password check code from the renew_all method for
SIP2. This is required, as many units send an empty AD field in the SIP
message which can cause the transaction to fail.. but the authentication
should have already taken place earlier in the session.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Wed, 3 Feb 2021 10:16:30 +0000 (10:16 +0000)]
Bug 27600: Add unit test
This patch adds a basic unit test to catch the case where patron_pwd is
sent to renew_all as an empty string.
Test plan
1/ Run t/db_dependent/SIP/ILS.t and watch it fail
2/ Apply second patch
3/ Re-run the above test and watch it pass.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Tue, 11 May 2021 08:39:42 +0000 (09:39 +0100)]
Bug 28264: (QA follow-up) Impliment fix for debit_type_code
The fix for the debit_type line was also missing.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ivan Dziuba [Thu, 6 May 2021 19:33:02 +0000 (15:33 -0400)]
Bug 28264: Transaction type is empty is cash register statistics wizard report
To test:
1) Go into a patron file and add some manual fees and pay them
2) Go to Reports > Statistics wizards > Cash register
3) In the form, choose Transaction type: All transactions
4) Click "Submit"
5) Note that the Transaction type column is empty
6) In the form, choose Output: To a file
7) Click "Submit"
8) Open the file in a spreadsheet software (I use LibreOffice)
9) The Transaction type column IS NOT empty
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 7 Jan 2021 09:55:35 +0000 (10:55 +0100)]
Bug 27348: Fix test on ALTERNATE_INDEXER_DAEMON in koha-indexer
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Thu, 7 Jan 2021 00:22:03 +0000 (00:22 +0000)]
Bug 27348: Fix test on INDEXER_PARAMS in koha-indexer
koha-indexer doesn't test INDEXER_PARAMS correctly which causes errors
to display when stopping/starting the daemon.
This patch fixes the test so that the variable is tested as a string,
so that no errors are created and the params are passed correctly.
Test plan:
0. Apply patch
1. vi /etc/default/koha-common
2. Add the following to the bottom of the file:
INDEXER_PARAMS="-daemon -sleep 6"
3. cp debian/scripts/koha-indexer /usr/sbin/koha-indexer
4. koha-indexer --stop kohadev
5. Note no errors
6. koha-indexer --start kohadev
7. Note no errors
8. ps -efww | grep "indexer"
9. Note that rebuild_zebra.pl has the arguments "-daemon -sleep 6"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 7 Jun 2021 16:36:20 +0000 (16:36 +0000)]
Bug 28443: Terminology: Issuing should be Checking out
This patch modifies the title element of the batch checkout page so that
it uses the phrase "Batch check out" instead of "Issuing."
To test, apply the patch and enable BatchCheckouts system preference.
- Open a patron for checkout who has a category included in the
BatchCheckoutsValidCategories system preference.
- Click the "Batch check out" tab and confirm that the page's title is
correct.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Mon, 24 May 2021 10:58:00 +0000 (10:58 +0000)]
Bug 28428: Capitalization: Password Updated
This patch corrects the case of two headings on the "Change password"
page in the staff interface.
As far as I can tell these strings are never seen because the page
redirects to the patron detail page instead of redisplaying after a new
password or username is submitted.
A visual inspection of the patch may be the only test.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test:
1- create an item type with a 'Default replacement cost' and a
'Processing fee (when lost)'
2- numbers are displayed with 6 decimals.
4- apply patch
5- numbers are displayed with 2 decimals.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 7 Jun 2021 12:26:02 +0000 (12:26 +0000)]
Bug 28522: Correct eslint errors in staff-global.js
This patch makes minor corrections to staff-global.js in order to quiet
warnings from ESLint. This includes:
- Remove unused variables
- Declare undeclared variables
- Update list of global and exported variables and functions
- Correct whitespace
- Remove an unused function (paramOfUrl)
To test, apply the patch and clear your browser cache if necessary.
- Confirm that the first search header form field has focus when
switching bewteen pages.
- Confirm that text entered in any search header form field persists
when you switch search header form tabs, e.g. a word typed into the
"Check out" tab is copied to the "Check in" form when you switch to
that tab.
- Perform a search from the "Search the catalog" tab in the header. On
the search results page and any following detail page your search term
should remain in the header search form.
- From a bibliographic detail page, confirm that selecting a list from
the "Add to list" button menu correctly triggers a popup window.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 24 May 2021 10:24:59 +0000 (10:24 +0000)]
Bug 28427: Terminology: Shelf should be list
This patch corrects the title element on the download list page in the
staff interface.
The affected page should never be seen by the user because other
error-handling should take precedence. In order to see it you have to
set up such an error:
- Log into the staff client as a user with existing lists.
- Open the Lists page.
- Open one of your lists in a new tab.
- In the original tab, delete the list you opened.
- In the tab showing the contents of the list, click the "Download" menu
button and select an option.
- You should be redirected to a page with an error message at the top.
- The title of this page should be correct: "Download list."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 21 May 2021 17:11:09 +0000 (17:11 +0000)]
Bug 28423: JavaScript error on MARC modifications page
This patch makes a minor change to the MARC modifications template so
that the "mmtas" variable isn't defined if there is no JSON to be
assigned as its value.
To test, apply the patch and go to Administration -> MARC modification
templates.
- If necessary, add a template with at least one action.
- Check the browser console, there should be no errors.
- Click the "Edit" button corresponding to one of the template actions.
- The details of the action should load correctly in the edit form and
there should be no errors in the console.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 17 Jun 2021 09:38:15 +0000 (09:38 +0000)]
Bug 28582: Fix hashref in a warning message
Can't enqueue letter HASH(0x55edf1806850)
Test plan:
If you cancel an article request when there is no email address
(no branch email, no KohaAdminEmailAddress), Koha warns.
Verify that the warning now contains the letter code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 10 Jun 2021 14:02:16 +0000 (14:02 +0000)]
Bug 28545: Noisy uninitialized warn at opac-MARCdetail.pl line 313
Test plan:
You do not even need a NULL value in a authorised value controlled
item field, a zero in damaged or withdrawn is enough to trigger the
warnings. (Because only the 1 is linked to an authvalue.)
Check your plack-opac-error.log before and after applying this change.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Without the patch I had at least four warnings per item: withdrawn,
lost, damaged and notforloan.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Fri, 28 May 2021 10:33:24 +0000 (13:33 +0300)]
Bug 28479: Use primary keys to check object existence in TestBuilder
The TestBuilder::build_object function used any foreign keys to check
whether an object already exists or not. This brought incorrectly
results of unrelated objects because using any other keys other than
primary keys don't guarantee our results to point to one single
object. For example, as is put here in the unit test, if you created
two items with the same biblionumber and then tried to create a hold
using build_object() we were using the biblionumber to check whether
an item was linked to the hold already. Thus, we were checking whether
a random item was already linked to the hold instead of the one we
wanted either by passing it explicitly to build_object() or the one
build_object() created implicitly. This also resulted in following
warnings when there were more than one match:
DBIx::Class::Storage::DBI::select_single(): Query returned more than
one row. SQL that returns multiple rows is DEPRECATED for ->find and
->single at /kohadevbox/koha/t/lib/TestBuilder.pm line 235
To test:
$ prove t/db_dependent
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 21 May 2021 07:37:54 +0000 (09:37 +0200)]
Bug 28388: Preserve "Browse results" when "view plain" is clicked
This patch modifies the way search sessions are preserved in the OPAC so
that viewing the "plain MARC" view will not cause the search context to
be lost.
To test, apply the patch and make sure OpacBrowseResults is enabled.
- Perform a search in the OPAC which will return multiple search
results.
- View the details of one of the search results.
- You should see a "Browse results" box in the right-hand sidebar.
- Click the "MARC view" link.
- If you click back to the "Normal view" now, the results browser
should still appear.
- From the MARC view, click the "view plain" link.
- Return to the "Normal view."
- Before the patch: The results browser is gone.
- After the patch: The results browser is still there.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 7 Jun 2021 18:47:25 +0000 (18:47 +0000)]
Bug 28511: Road types in OPAC should prefer OPAC description if one exists
This patch modifies the patron entry form in the OPAC so that if street
types are defined in authorized values, the OPAC description is
preferred.
To test, apply the patch and go to Administration -> Authorized values.
- Add or edit entries in the "ROADTYPE" category.
- Some entries should have only the "Description" set, while others
should have "Description" and "Description (OPAC)".
- In the OPAC, open the patron registration page. Check the "Stree type"
drop down in the "Main address" section.
- For entries which have an OPAC description, this value should show.
- For entries without an OPAC description the default should show.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 24 May 2021 15:55:43 +0000 (15:55 +0000)]
Bug 28422: OPAC MARC detail view doesn't correctly evaluate holdability
This patch modifies the MARC detail view in the OPAC so that it
evaluates whether a title can be placed on hold in the same way it is
done on the "normal" detail page and the ISBD detail page. This allows
for consistency in the display of the "Place hold" link.
To test, apply the patch and log into the OPAC.
- Perform a search which will return results, at least one of which can
be placed on hold.
- View the detail page, the MARC detail page, and the ISBD detail page.
In each case the "Place hold" link should appear in the sidebar.
- View the same pages for a record which cannot be placed on hold to
confirm that the link doesn't appear. For instance:
- All items are not for loan.
- All items are lost.
- There are no items attached.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 24 May 2021 13:13:10 +0000 (13:13 +0000)]
Bug 21286: Add Corporate-name as phrase to zebra indexes
When using Zebra for searching, Koha performs a number of searches in order
to improve relevancy. This means that even for 'wordlist' search, we perform a phrase search.
When selecting 'Corporate-name' as an index, this expansion of the search causes errors and fails
the search
We can fix this for 'Corporate-name' searches by adding a phrase index
To test:
1 - Edit koha-conf.xml and uncomment the zebra debug line and add 'request' to the list
2 - Restart all
3 - tail -f /var/log/koha/kohadev/zebra-output.log
4 - Edit a record to add a 110 field e.g. 'House plants'
5 - Enable syspref IntranetCatalogSearchPulldown
6 - Search for 'Corporate name' and term 'House plants'
7 - No results
8 - View the log, see 'ERROR' and full search terms listed
9 - Apply patch
10 - copy the zebra files to the production instance:
cp etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
cp etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
11 - restart all
12 - rebuild: sudo koha-rebuild-zebra -v -f kohadev
13 - Repeat search
14 - Success!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 13 May 2021 10:25:36 +0000 (11:25 +0100)]
Bug 28344: Restore ability to issue refund against older payments
When implimenting the refund features into the point of sale system, it
appears that at some point we lost the ability to apply refunds against
accountlines in the historic transactions table. This patch restores
that ability.
Test plan:
1/ Add some transations via the point of sale system
2/ Navigate to the 'register details' page and note that you have the
option to refund some of the lines.
3/ Use the Cashup option to make the transactions historic
4/ Refresh the page and then select a past date to see the historic
transactions in the second datatable
5/ Note that the option to refund has not dissapeared from all lines
6/ Apply patch
7/ Refresh and note the refund option now appears as expected.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lucas Gass [Mon, 10 May 2021 21:16:59 +0000 (21:16 +0000)]
Bug 28313: Add street type to alternate address in OPAC
1. Add some values to the ROADTYPE authorized value
2. Go to PatronSelfRegistrationBorrowerUnwantedField and make sure B_streettype is NOT checked
3. Go the self reg form, no alternate address street type field
4. Apply patch
5. Check the self reg form, B_streettype should be there with all the options defined in ROADTYPE a.v.
6. Check the self modification form, B_street type should be there.
7. Make sure PatronSelfRegistrationBorrowerUnwantedField and PatronSelfModificationBorrowerUnwantedField hide the field correctly.
8. Make sure PatronSelfRegistrationBorrowerMandatoryField properly makes the field required.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Thu, 3 Jun 2021 23:33:11 +0000 (23:33 +0000)]
Bug 28191: Upate wording on batch patron deletion
This adds another point to the list of things that prevent patron
deletion:
<li>They have permissions assigned to them.</li>
In order to test:
- Go to tools > patron deletion and anonymization
- Verify the new condition shows at the top of the page.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Fri, 4 Jun 2021 11:06:53 +0000 (14:06 +0300)]
Bug 28513: Fix analytics search links so they don't match unrelated biblios
At least when using Searchengine=Elasticsearch what happened was that
without () parenthese included the search for Host-item field was done
only to the first token, the subsequent ones matched any
fields. Adding the parentheses restrict the search to Host-item search
field only.
To test:
1) Set Searchengine = elasticsearch
2) Make a biblio with 245a = "biológica paranaense." and 773a = "Acta"
3) Go to a biblio with 245a = "Acta biológica paranaense" (in
kohadevbox or create one if you need).
4) Notice that the "Acta biológica paranaense" biblio's detail page link "Show
analytics" takes to the "biológica paranaense" incorrectly just
because the 773a has "Acta" and the words "biológica" and "paranaense"
appear elsewhere in the biblio.
5) Apply patch and notice the link is now not created at all
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 11 Jun 2021 17:44:01 +0000 (17:44 +0000)]
Bug 27929: (QA follow-up) Hide tag editor on regex
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 11 Mar 2021 15:22:13 +0000 (16:22 +0100)]
Bug 27929: Allow regex for subfield linked with cataloguing plugin
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Thu, 10 Jun 2021 13:05:51 +0000 (15:05 +0200)]
Bug 28542: Move new authority from Z39.50/SRU to a button
Actually in authority tools bar, 'New from Z39.50/SRU' is inside 'New autority' menu.
This is different from biblio cataloguing toolbar, and adds a click to access it.
I propose to move this to its own button.
Test plan :
1) Create a Z39.50/SRU server connexion for authorities
2) Go to authorities home page
3) Check you see buttons 'New autority' and 'New from Z39.50/SRU'
4) Click on 'New autority'
5) Check you only see autority types
6) Click on 'New from Z39.50/SRU'
7) Check you go to Z39.50/SRU popup
8) Delete Z39.50/SRU server connexion for authorities
9) Go to authorities home page
10) Check you dont see 'New from Z39.50/SRU'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Fri, 21 May 2021 06:52:25 +0000 (06:52 +0000)]
Bug 28409: Comprehensively validate category in opac-shelves.pl
Default to a category of 1 (ie Private). Only allow input of 1
or 2 (ie Public)
== Test plan ==
1. Go to http://localhost:8080/cgi-bin/koha/opac-shelves.pl?category=function(){window.location.href%20=%20%27https://git.koha-community.org/stats/koha-master/authors.html%27}()
2. Note that you are redirected to another website
3. Go to http://localhost:8080/cgi-bin/koha/opac-shelves.pl?op=add&shelfname=foo&category=9
4. Note that you can't see this list in the Lists (but it has been added to the database)
5. Apply the patch & restart services
6. Go to http://localhost:8080/cgi-bin/koha/opac-shelves.pl?category=function(){window.location.href%20=%20%27https://git.koha-community.org/stats/koha-master/authors.html%27}()
7. Note that you are not redirected to another website
8. Go to http://localhost:8080/cgi-bin/koha/opac-shelves.pl?op=add&shelfname=bar&category=9
9. Note that "bar" has been added as a Private list
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes a scope issue. Originally, a variable declared as
our $borcat
was replaced by
my $patron
This patch makes the method not rely on global variables, but have a
parameter for the patron, and thus things are clearer.
To test:
1. Open the OPAC detail page for a record
=> FAIL: The logs show some errors about the $patron variable not
available in the scope
2. Apply this patch
3. Repeat 1
=> SUCCESS: No errors
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the route set the 'updated_by' attribute as well, when
resolving a return claim through the API.
Tests are added for this behavior.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/return_claims.t
=> SUCCESS: Tests pass! updated_by is set correctly!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28586: Pass the right parameter to resolve claim
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that this is not consistent but at least we have lib now in both
situations
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Mon, 7 Jun 2021 00:14:55 +0000 (00:14 +0000)]
Bug 28519: Put CGI::Session::Serialize::yamlxs in lib directory
This patch adds a "lib" directory to the source tree which gets
mapped to the same directory as "C4" and "Koha" for single and
standard installations.
CGI::Session::Serialize::yamlxs is put into this "lib" directory.
This patch also includes some changes so that dev/git installations
work as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 2 Jun 2021 15:20:08 +0000 (15:20 +0000)]
Bug 28503: Compare item homebranch to patron branch when hold policy set to 'from_home_library'
This fixes an issue in the way we calculate the check for hold policy 'from_home_library'
Currently we change the comparison based on ReservesControlBranch, however, that should
only control the rule we fetch, not how we compare
When ReservesControlBranch is set to "patron's home library" we compare the patron's branch to
the patron's branch, this is useless and means we pass the check for all branches all of the time
We should instead compare the patron's branch to the item's branch, and only fetch the rule using ReservesControlBranch
To test:
1 - Have a record with an item from library A and library B
2 - Set the 'Default checkout, hold and return policy'->Hold policy->From home library for all libraries
and ensure you have no branch specific/itemtype specific rules set
3 - Attempt to place a hold on the record for a patron from library B
4 - Note that only the library B item is holdable - place a title level hold (do not choose an item)
5 - Check in the item from library A
6 - It fills the hold - This is incorrect - ignore the hold
7 - Apply patch
8 - Restart all the things
9 - Check in the item from library A
10 - No hold found
11 - Check in the item from library B
12 - Hold found, correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28503: Clarify what ReservesControlBranch controls
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 2 Jun 2021 15:05:08 +0000 (15:05 +0000)]
Bug 28503: Unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 7 Jun 2021 16:02:35 +0000 (16:02 +0000)]
Bug 28488: Javascript error in self-checkout (__ is not defined)
This patch adds inclusion of the internationalization JavaScript which
is required by the newest version of the DataTables include. It
references the double-underscore function provided by i18n.js.
To test, apply the patch and log into the self-checkout system as a user
with checkouts. The table of checkouts should display correctly and
there should be no JavaScript errors in the console.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 5 Jun 2021 14:08:46 +0000 (16:08 +0200)]
Bug 28518: Display missing inputs for "Return to the last advanced search"
When more than 3 search terms are passed on the advanced search form,
the "Return to the last advanced search" feature does not display them.
Test plan:
Perform an adv search at the OPAC, enter more than 3 terms, launch the
search, click the "Return to the last advanced search" link and confirm
that all the entries are there.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 11 Jun 2021 11:25:57 +0000 (13:25 +0200)]
Bug 28383: Fix itemsearch when accessed from the login form
There are params here (credentials), we need to test for the existence of $format.
Test plan:
logout
access /cgi-bin/koha/catalogue/itemsearch.pl
Login
=> Without this patch you get a 500 (because we hit the exit statement)
=> With this patch you see the items search form.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Tue, 1 Jun 2021 04:43:23 +0000 (04:43 +0000)]
Bug 28467: (QA follow-up) Remove errorenous space in borrowers.lastseen
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28467: Update wording of TrackLastPatronActivity syspref
To Test:
1 - look up TrackLastPatronActivity
2 - Read it, be dissatisfied with it
3 - apply patch, restart, reload page
4 - be happier with the new wording
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Tue, 8 Jun 2021 08:14:20 +0000 (11:14 +0300)]
Bug 28520: Allow creating a transfer back automatically if a hold is canceled during transit
This fixes regression caused by "Bug 12362: Cancel transfer with hold
cancelation" where cancelled hold's transfer didn't show up in
intranet and opac because it create a new transfer that was not yet
put in in-transit state. The original idea of bug 12362 was to be able
to trigger transfer back home if a hold was cancelled (a regression
caused by bug 26078). However, we can do it more simply by setting the
$validTransfer variable true in the item check-in code when we are
dealing with Reserve transfers. More down in the AddReturn() code
there is also a check "and !$resfound" to make sure we only try to
trigger the transfer back home automatically if there is no hold
waiting at the current location the item arrived in.
It should be noted however that now we only display generic message
for the automatic transfer reason. Bug 12362 made the return display
as the reason "Transfer was cancelled whilst in transit". However,
since this fixes the original regressions caused by bug 26078 and
restores similar behaviour to that I think giving a more descriptive
message for example regarding a hold being cancelled can be considered
a further enhancement.
To test:
1) Apply patch
1) Have biblio with item in branch A
2) Create a new hold with a pickup library to branch B
3) Check-in the item at branch A and confirm the hold and transfer
4) Cancel the hold
5) Check-in the hold at branch B and notice it prompt to return it to
branch A
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Tue, 8 Jun 2021 07:55:52 +0000 (10:55 +0300)]
Bug 28520: Bring back TransferCancellation reason handling from reverted Bug 12362
The code from Bug 12362 was reverted but there might be still in
database transfers with the reason 'TransferCancellation' so we need
to restore the code to handle displaying that information.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
JD amended patch: restore Koha::Item::Transfer->from_library (we are
adding tests in a future patch).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 6 May 2021 13:14:24 +0000 (14:14 +0100)]
Bug 24434: Add 'WrongTransfer' to cancellation_reasons
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 17 May 2021 09:42:04 +0000 (10:42 +0100)]
Bug 24434: Submit on print slip
This patch ensures that the print slip option on the WrongTransfer modal
also submits the form and thus triggers the actual transfer of the item.
We also prevent a double transfer submission (and thus a cancellation
line appearing in the branchtransfers table) for the case where a
transfer back home is triggered.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 09:11:19 +0000 (10:11 +0100)]
Bug 24434: Unit tests for updateWrongTransfer
Add unit tests to cover updateWrongTransfer
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24434: (QA follow-up) Remove tab character
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 08:12:38 +0000 (09:12 +0100)]
Bug 24434: Add Unit Tests for relations
This patch adds unit tests for the newly introduced to_library (and also
add the missing test for the existing from_library).
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 6 May 2021 12:53:51 +0000 (13:53 +0100)]
Bug 24434: Reinstate updateWrongTransfer
This patch re-instates the call to updateWrongTransfer to ensure the
transfer line is updated to reflect the new frombranch.
Test plan
note: when applying the patches, also update the database
1/ Check an item out from it's home library
2/ Check the item in at another library
(with AutomaticItemReturn system preferences enabled)
2a/ Accept the transfer and note we now have a transfer present from the
items check-in library to it's home library
3/ Check the item in at a third library
3a/ Note you are asked to return the item to it's home library.
3b/ With the patch applied, the modal title should highlight that a
'Wrong transfer' was detected.
4/ Go to the item record and note the holding library has been updated
to reflect where the item was most recently checked in.
4a/ With the patch applied the item status should reflect the last
checked in branch as the 'from' branch of the transfer.
5/ check-in from a 4th library, but use the 'Print slip' option for
accepting the transfer and confirm that also works.
6/ check-in from a 5th library, but use the 'Cancel' option and check
that this results in the item staying at it's current location and the
final transfer having been cancelled.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alexis Ripetti [Thu, 13 May 2021 15:09:05 +0000 (11:09 -0400)]
Bug 28350: Fix borrowernotes sorting for patron search
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28338: Default to holding branch to save clicks
This patch makes request.pl pass the holding library object to the
template, if it is a valid pickup location for the item. This way, the
template can set a good default to save clicks.
To test:
1. Have "Hold pickup library match" set to "Item's home library"
2. Have a record with items in three different branches. For example:
- item1: homebranch: MPL, holdingbranch: MPL
- item2: homebranch: FPL, holdingbranch: FPL
- item3: homebranch: CPL, holdingbranch: IPT
3. Have FPL marked as 'No' for pickup location
4. On the record, open the page for placing a hold for a patron
(acevedo?)
=> SUCCESS: You are presented the regular hold placing page, with an
extra column on the items for pickup location setting
=> SUCCESS: The item2 (on FPL) cannot be selected, there's a clear message
about not having valid pickup locations
=> FAIL: The other ones don't have anything pre-selected on the
dropdowns
5. Apply this patch
6. Repeat 4 (go back to the record, etc)
=> SUCCESS: Nothing changed BUT the item with holding branch = MPL has
it set by default in the dropdown.
=> SUCCESS: IPT is not a valid pickup location for item3, so not set by
default in this case.
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28338: Make item-level holds use locally defined pickup branches
Besides the commit subject, this patch does much more:
- It makes request.pl stop passing a pickup location to
CanItemBeReserved
- It makes the page use the API to render a dropdown for each item, with
their valid pickup locations
- Items with no valid pickup locations have a nice message about why
they are disabled for selection
To test:
1. Apply this patch
2. Choose a biblio for placing a hold
3. Choose a patron
=> SUCCESS: You are presented with a new layout, that includes a
dropdown for choosing each item's pickup location. If an item is not
holdable, it still isn't.
4. Try having an item whose home branch is not marked as a pickup
location
=> SUCCESS: Notice you cannot choose that item
5. CHoose an item, but do not choose a branch, and click 'Place hold'
=> SUCCESS: It shows an alert about the need to choose a pickup location
6. Choose one of the (only possible) pickup locations for the specific
item
7. Place the item level hold
=> SUCCESS: All goes as expected!
8. Sign off :D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 27931: Add GET /items/:item_id/pickup_locations
This patch adds the mentioned route. It does so by:
- Adding the new path in paths.json
- Adding the full route spec in items.json
- Adds a controller method that takes care of the task
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/items.t
=> SUCCESS: Tests pass!
3. Play with your favourite REST tool. Pay special care to
the AllowHoldPolicyOverride syspref and the expected behaviors.
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 9 Jun 2021 17:59:59 +0000 (17:59 +0000)]
Bug 28538: Insert formatted date if valid
This patch restores the setting of the date from bug 27937 and adds a parsing of the date to
ensure the correct format
To test:
1 - Follow test plan from bug 27937 - it fails
2 - Follow test plan from bug 28351 - it succeeds
3 - Apply patch
4 - Repeat 1-2
5 - both plans pass now
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 4 Jun 2021 10:19:18 +0000 (12:19 +0200)]
Bug 28487: Fallback to default template in overdue_notices
There is no fallback to the "default" language if there is no
language-specific template for the lang of the patron.
I am not really sure why we are not using GetPreparredLetter here (which
defaults), but this needs to be backported into all stable branches and
so as small as possible.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Mon, 7 Jun 2021 05:30:35 +0000 (05:30 +0000)]
Bug 28490: Add DBIx schema changes for testing
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Wed, 2 Jun 2021 17:37:25 +0000 (20:37 +0300)]
Bug 28490: Bring back accidentally deleted relationship columns
These were in active use before and were accidentally deleted in Bug
26995. This restores those deleted relationship columns.
To test:
1) verify the borrower_modifications, borrowers,
deletedborrowers contain the column exactly like it was before after
applying these patches by comparing to the old kohastructure.sql
version
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Wed, 2 Jun 2021 17:22:51 +0000 (20:22 +0300)]
Bug 28490: Comment out the relationship data removing DB update step
These columns that were actively used to store non-patron guarantor
relationship info were dropped incorrectly. In a later patch the
relationship fields will be re-added.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD Amended patch: Add a "SKIP" note on the DBrev we commented out
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Sat, 5 Jun 2021 13:27:02 +0000 (15:27 +0200)]
Bug 28489: Don't deal with encoding during the serialization
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log