Bug 36775: Allow multiple holds on record when holds per record is unlimited
To test:
1 set Holds Per Record to Unlimited
2 confirm hold placement interface does not include "Holds to place (count)"
3 apply patch, restart all
4 reload hold placement interface, confirm it does include "Holds to place (count)"
5 set Holds Per Record to 2
6 confirm Holds to place shows when placing a first hold for a patron, but not when placing a second
7 set Holds Per Record to 1
8 confirm Holds to Place does not show
9 sign off and eat a nice snack
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36791: Koha explodes when trying to edit an authority rec. with an invalid authid
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 2 May 2024 23:19:17 +0000 (16:19 -0700)]
Bug 27363: Restore temporary selection of Z39.50 targets throughout multiple searches
The advanced editor currently saves which Z39.50 servers are selected
in local storage using the index in the sorted array of servers, and
then misreads them back as though they were server_ids. We want them to
be server_ids, since that's immutable and the index can change with
changes in rank or server name.
We use the data-server-id property in the HTML more often as a server_id
than as the index that's currently stored there, so this patches
switches it back to be the server_id, and in the one place we would use
the index, instead uses Array.find to just get the server object instead
of referencing it by index.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to enable
2. Administration - Z39.50 Servers, for NATIONAL LIBRARY OF FRANCE
uncheck "Preselected"
3. To be sure you don't have confusing saved preferences, open
Firefox's Developer Tools, in the Storage tab open Local Storage and
select your URL
4. In the row for cateditor_preferences_{your Koha user id}, if there
are any values for selected_search_targets, delete them so you
have "selected_search_targets":{}
5. Open the advanced editor, and click "Advanced »" in the search box
6. You should have Local catalog unchecked, LIBRARY OF CONGRESS checked
because it is preselected, and NATIONAL LIBRARY OF FRANCE unchecked
7. Toggle each checkbox so Local catalog and France are selected, and
LoC is unselected.
8. In a new broser tab, open the advanced editor, and click "Advanced »"
9. You will see Local catalog unchecked, LoC checked, and France
unchecked.
That's the bug.
10. Apply patch, open the advanced editor in a new tab, click "Advanced »"
11. Toggle the checkboxes so Local catalog and France are selected, and
LoC is not selected.
12. Open the advanced editor in another new tab, click "Advanced »"
13. You should see what you just set, Local catalog and France checked,
and LoC unchecked, That's the correct behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Tue, 7 May 2024 15:46:23 +0000 (15:46 +0000)]
Bug 36804: Fix clear filter
1) Visit serials and click "New subscription":
http://localhost:8081/cgi-bin/koha/serials/serials-home.pl
2) Enter '112' on the record input and '1' on the vendor input. Click "Next"
3) 'First issue publication date' -> Enter some date in the past
4) 'Frequency' -> Enter '2/day'
5) 'Subscription start date' Same as step 3)
6) 'Subscription end date' Some date in the future
7) 'Numbering pattern' -> Enter 'Number'
8) Click 'Test prediction pattern'. Click 'Save subscription'
9) On the left side menu -> Click "Serial collection". Click the yellow button 'Edit serials'
10) On the first serial, edit the status to 'Late'. Save.
11) Visit serials claims:
http://localhost:8081/cgi-bin/koha/serials/claims.pl?supplierid=1
12) Input some dates in "From" and "To"
13) Click 'Clear filter'. Notice it doesn't work.
14) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:22:13 +0000 (14:22 +0000)]
Bug 34263: (QA follow-up): Use flatpickr .clear instead
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 13:09:39 +0000 (16:09 +0300)]
Bug 34263: Suspending holds consecutively populates previously used date falsely
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:07:25 +0000 (14:07 +0000)]
Bug 36774: Remove wrapper if already exists
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 11 Jan 2024 11:53:42 +0000 (11:53 +0000)]
Bug 34360: Get distinct biblionumber
This fixes the problem noted in the bug:
[WARN] DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /usr/share/koha/Koha/Objects.pm line 421
We are taking a list of items, assuming the scenario is that these are from a single biblio and possibly some host_items, then searching and ordering conditionally on whether the biblio is a serial.
Current code gets the first biblio from the list - this patch adds a 'DISTINCT' to the results ebfore fetching the column
To test:
1 - Find a biblio in the staff interface
2 - Transfer one of the items a few times
3 - Recreate the issue on the command line:
export DBIC_TRACE=1
perl -e 'use Koha::Items; my $items = Koha::Items->search({biblionumber=>9})->search_ordered(undef,{ prefetch => ['issue','current_branchtransfers'] }); $items->next'
4 - Note warning:
DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /kohadevbox/koha/Koha/Objects.pm line 426
5 - Apply patch
6 - Repeat 3
7 - Error is gone
Signed-off-by: baptiste <baptiste.bayche@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 30 Apr 2024 12:08:09 +0000 (12:08 +0000)]
Bug 19768: Add "Title notes" tab to OpacSerialDefaultTab preference
This patch adds a "title notes tab" option to the opacSerialDefaultTab
preference.
To test, apply the patch and restart services.
- Go to Administration -> System preferences -> opacSerialDefaultTab.
- There should now be a new options, "title notes tab."
- Set the preference to the new value.
- Go to the OPAC and locate a bibliographic record which is associated
with a subscription and which has data in a 5XX notes field.
- On the bibliographic detail page the "Title notes" tab should be
selected by default.
- Test that the other system preference values still work correctly too.
Sponsored-by: Athens County Public Libraries Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 17 Apr 2024 10:31:27 +0000 (10:31 +0000)]
Bug 36618: Make biblio creation optional for ERM local titles
This patch makes biblio creation on local title creation optional.
Test plan:
1) Navigate to the local title creation form
2) Create a title and leave the "Create record" box unchecked
3) Submit the form
4) Search the catalogue for the title you have just created - no biblio result will be available
5) Repeat steps 2 - 3 but this time check the box to create a record
6) You should now be able to find a record in the catalogue for the title you just imported
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 26 Jan 2024 18:14:04 +0000 (18:14 +0000)]
Bug 36582: Add option to set library, desk, and register from user menu
This patch adds an expandable "panel" in the user dropdown menu in the
staff client. Expanding the panel will load the form from
set-library.pl, including library, desk and register options if present.
The patch moves the contents of desk_selection.js and
register_selection.js into staff-global.js so that the functionality is
available on every page.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Test plan stolen from Bug 36572:
1. Have 3 staff accounts to test:
-STAFF A: superlibrarian
-STAFF B: loggedinlibrary permission
-STAFF C: no loggedinlibrary or superlibrarian permission
2. Enable 'UseCirculationDesks' and create some desks. (Admin >
Circulation desks)
3. Enable 'UseCashRegisters' and create some registers ( Admin > Cash
registers)
4. Use STAFF A ( superlibrarian ) and make sure you can change branch,
desk and register.
5. Use STAFF B ( loggedinlibrary permission ) and make sure you can
change branch, desk and register.
6. Use STAFF C ( no loggedinlibrary or superlibrarian permission ) and
make sure you can change branch, desk and register.
7. Each time you change you should be redirected to the page you were
previously on.
8. Turn off UseCirculationDesks, make sure everything still works.
9. Turn off UseCashRegisters, make sure everthing still works.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 3 May 2024 17:12:26 +0000 (17:12 +0000)]
Bug 35648: (follow-up) Remove sorting from transport columns
There's not a simple way to handle sorting of a column containing only
checkboxes, so I think it makes sense to remove the sorting unless
someone feels strongly about it being necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 22 Mar 2024 12:47:22 +0000 (12:47 +0000)]
Bug 35648: (follow-up) Clear table filter before submitting
This patch takes advise from elasticsearch-mappings.js and adds an
onsubmit event to clear any DataTables filter before submitting. This
should prevent hidden fields from being overwritten.
To test, filter the table and make a change to one of the visible rows.
After submitting, confirm that the previously-hidden rows retain the
same settings as before.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 2 Jan 2024 20:11:28 +0000 (20:11 +0000)]
Bug 35648: Allow sorting of patron categories in Overdue notice/status triggers
This patch adds a basic DataTables configuration to the table of patron
categories on the Overdue notice/status triggers page. The table can be
sorted by patron category and can be filtered.
To test, apply the patch and go to Tools -> Overdue notice/status
triggers.
- Confirm that the table of patron categories is sorted by default by
patron category
- Other columns should not be sortable
- You should see a search field above the table which works to filter by
patron category.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 2 May 2024 13:19:05 +0000 (13:19 +0000)]
Bug 36755: Atomicupdate file
Test plan, k-t-d:
1) Apply patches.
2) Run the following SQL and save the output of each:
SHOW CREATE TABLE pseudonymized_borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types_branches;
SHOW CREATE TABLE borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types;
3) Run updatedatabase
4) Run the SQL queries again, compare the output of each with the previous output before updatedatabase.
5) Make sure the only diff between the two is VARCHAR(10) -> VARCHAR(64)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 2 May 2024 13:19:27 +0000 (13:19 +0000)]
Bug 36755: Update UI input element
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 6 May 2024 03:42:57 +0000 (03:42 +0000)]
Bug 32256: Use a new SCOBatchCheckoutsValidCategories syspref
So that this functionality can be controlled separately from staff-side batch checkouts
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 1 May 2024 14:19:09 +0000 (15:19 +0100)]
Bug 32256: (QA follow-up) Tidy sco-main.pl
This tidies the whole file as the patchset touched so much that we
basically needed to tidy all to make the QA scripts clean.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This enhancement modifies the self-checkout script to better handle 'impossible' and 'needs confirmation' checkout messages.
Test with a combination of barcodes that would invoke these messages, for example:
- impossible: barcode doesn't exist
- impossible: barcode is for a 'notforloan' item type
- impossible: debt
- needs confirmation: barcode already checked out, i.e. confirm renewal
Include barcodes that should have successful checkouts too.
Also, test with the following sysprefs:
- BatchCheckouts: enabled
- BatchCheckoutsValidCategories: none selected
Confirm SCO does not have a multi-line text area for more than one barcode, and doesn't accept more than one barcode.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 32256: Display barcodes not checked out in batch
This patch encourages the user to check out certain items individually if they fail to be checked out in a batch.
This way they will be presented with more useful error messages.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - Find three barcodes
3 - log into SCO with a user in category Patron, paste the barcodes separated by newlines and submit. confirm one item is succcessfully checked out and the other two barcodes are listed in the pop-up, encouraged to try checking out individually.
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 32256: (follow-up) Use correct patron category
This patch ensures we check the categorycode of the patron trying to issue the items is valid (based on BatchCheckoutsValidCategories), rather than the categorycode of the AutoSelfCheckAllowed patron.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - confirm AutoSelfCheckAllowed is allowed and contains the username and password for the self_check user. Confirm self_check user is in category Staff
3 - log into SCO with a user in category Patron, confirm you can only check out 1 item at a time
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Sponsored-by: Koha-US Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Tue, 7 Nov 2023 03:18:02 +0000 (03:18 +0000)]
Bug 32256: Add message to SCO that batch checkouts works for checkouts only
Not yet handling renewals, returns, or items that are impossible to check out.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 28 Aug 2023 04:58:26 +0000 (04:58 +0000)]
Bug 32256: Enable batch checkout using self-checkout
This patch allows more than one item to be scanned and processed at once in Koha's self-checkout module. The items in the batch will still be handled one-by-one, so if any item in the batch requires confirmation (i.e. to be renewed or returned) or is impossible to check out, the process will stop at that item. Any items earlier in the list will be processed, but any items coming after in the list will be ignored. This feature uses the existing BatchCheckouts and BatchCheckoutsValidCategories system preferences to determine if batch checkouts should be allowed.
To test:
1) Open the staff interface. Go to Koha Administration -> Global system preferences. Search for "BatchCheckouts". Confirm BatchCheckouts syspref is disabled, and no categories are selected for the BatchCheckoutsValidCategories syspref.
2) In another tab, open the OPAC self checkout (found out OPACBaseURL/cgi-bin/koha/sco/sco-main.pl) and log in
3) Confirm the self-checkout works as normal for checking out, returning or renewing one item at a time
4) Go back to the staff interface tab (you may need to log back in). Enable the BatchCheckouts syspref but leave the BatchCheckoutsValidCategories syspref empty.
5) Refresh the OPAC self checkout tab. The barcode input field will now be bigger to support a list of barcodes. Enter a list of barcodes separated by newlines and Submit.
6) Only the first barcode should be processed. This is because no categories are valid for BatchCheckouts.
7) Go back to the staff interface tab (you may need to log back in). Select at least your patron category for the BatchCheckoutsValidCategories syspref and Save.
8) Refresh the OPAC self checkout tab. Enter a list of barcodes separated by newlines and Submit. Confirm all valid items are checked out as expected.
9) Test with a few items that are notforloan or would not be valid checkouts. Confirm they are not checked out, but other valid items in the batch are checked out successfully.
10) Test with a batch where one of the items is already checked out to the patron. The batch should get blocked at this item as the self-checkout asks for confirmation.
11) Test with both renewing and returning of items that are already checked out to the patron. This will only work with one item at a time and later items in the list will be ignored.
Sponsored-by: Koha-US Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 7 May 2024 14:55:34 +0000 (14:55 +0000)]
Bug 31097: (follow-up) Restructure messages a bit
This patch updates the patron restrictions markup and splits up some
strings to (hopefully) improve the translation process. The patch also
fixes a bug in a previous patch which prevented manual restrictions from
being displayed if there was also a restriction added by
overdue_notices.pl.
Test that all three kinds of restrictions display correctly:
- Restrictions added by overdue process
- Manual restriction without an expiration date
- Manual restriction with an expiration date
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Philip Orr [Thu, 18 Apr 2024 15:41:33 +0000 (15:41 +0000)]
Bug 31097: Added more restrictions info
Added more info to the restrictions message
in circulation as well as to the OPAC display
in "Your account" and to the display of
restriction messages when trying to place a
hold in the OPAC.
To Test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
4a. Make sure that you add some with an
expiration date and some without
4b. Make sure you add some with a comment and
some without
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed and not all info
is displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
10. Notice the colon is only displayed
if there is a comment
11. Notice the expiration date is also displayed
12. Open the OPAC and log in with that user
(or if you want to log in with your own user:
make sure they have all the restrictions
mentioned above as well)
13. Go to "Your account" in the OPAC
14. Notice the display of restrictions
15. Try to place a hold on any record
16. Notice the display of restrictions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Philip Orr [Thu, 18 Apr 2024 09:37:59 +0000 (09:37 +0000)]
Bug 31097: Display restriction types
This patch changes the display of patron
restrictions in checkout and patron details
pages to show the restriction type for each
restriction. It also changes the display so
each restriction is shown on a newline.
To test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Place a hold on any bib record
2. Cancel the hold by clicking the trash can icon next to it
--> Note that there is an empty red page section in the modal
3. Apply patch and refresh the page
4. Repeat steps 1-2
--> No empty red page section
5. Confirm that the test plan from bug 33174 still works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 11:27:06 +0000 (14:27 +0300)]
Bug 36534: Batch operations when using limit in report
When report results number exceeds the result per page limit, batch
operations link reads "Batch operations with (page limit) records" even
if there are more or less shown records (more when using limit in SQL or
less in the last page of result). This patch fixes the link text to
actual shown records.
To test:
1) Create a report of items with a limit of e.g., 26.
2) Run report.
3) See that number of results shown exceeds 20 but the link says "Batch
operations with 20 visible records".
4) See that the second page shows 6 results but the link is still for 20
records.
5) Apply patch.
6) Run report again.
7) See that the link texts will show correctly 26 records on the first
page and 6 records on the second.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 7 May 2024 08:45:56 +0000 (09:45 +0100)]
Bug 36757: Sync concerns tables
This patch re-syncs the two catalog concerns display tables markup. We
add the 'Title' field into the catalog/detail version of the table and
split the columns settings so you can control the table distinctly from
the cataloguing module version so we can hide 'title' by default in the
details display tab.
This results in the table matching the display from the cataloguing
module page, i.e. the assignee and status detail displays.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 24 Apr 2024 17:05:18 +0000 (17:05 +0000)]
Bug 36687: Update itemtypes.notforloan to not allow NULL values and change to tinyint(1)
To test:
1. Have some itemtypes.notforloan values set to NULL.
2. APPLY PACTH, updatedatabase, restart_all
3. When you updatedatabase those values should be set to 0.
4. Try updating an itemtypes.notforloan value to NULL. You cannot.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 3 May 2024 14:22:13 +0000 (14:22 +0000)]
Bug 34263: (QA follow-up): Use flatpickr .clear instead
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katariina Pohto [Thu, 2 May 2024 13:09:39 +0000 (16:09 +0300)]
Bug 34263: Suspending holds consecutively populates previously used date falsely
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36786: (Bug 31791 follow-up) Koha explodes when trying to edit a biblio with invalid biblionumber
After changes made to addbiblio with the bug 31791, when trying to open the
editor with biblionumber=<invalid_number> (e.g. a deleted biblionumber)
Koha explodes with a message << Can't call method "can_be_edited" on
an undefined value at /kohadevbox/koha/cataloguing/addbiblio.pl line 555 >>
Test plan:
==========
1. Try to edit a biblio giving as a biblionumber (in URL) a non-existing
biblionumber, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=1234567
Koha should explode with the message:
Can't call method "can_be_edited" on an undefined value at
/kohadevbox/koha/cataloguing/addbiblio.pl line 555
2. Apply the patch; restart_all.
3. Repeat p.1. You should get a page with the info: "The record you are trying
to edit doesn't exist...".
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 2 May 2024 16:44:36 +0000 (16:44 +0000)]
Bug 36750: (35138 follow-up) Use same display code for OPAC
To test:
1 - In OPAC with ES enabled do a search
2 - Note missing facet labels
3 - Apply patch
4 - They are back!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Tue, 7 May 2024 05:41:54 +0000 (05:41 +0000)]
Bug 36796: (follow-up) Fix column descriptions for the statistics table
This follow-up to bug 32312 fixes the descriptions for the statistics
database columns, used in guided reports.
It removes the duplicate statistics section in Koha/Database/Columns.pm
so that descriptions are displayed for all columns, as originally
intended.
It also adds a description for the interface column (a new column added
after the original patch was pushed).
Test plan:
1. Go to Reports > Guided reports > Create guided report.
2. Choose 'Circulation' for the module to report on and select
'Next'.
3. Choose 'Tabular' for the type of report and select 'Next'.
4. Scroll down to the statistics table section and note that some
columns have descriptions and some don't:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Type / statistics.type
Item number / statistics.itemnumber
Item type / statistics.itemtype
statistics.other
statistics.location
Borrower number / statistics.borrowernumber
statistics.ccode
statistics.categorycode
statistics.interface
5. Apply the patch.
6. Restart all the things (restart_all).
7. Repeat steps 1 to 4.
8. Scroll down to the statistics table section again and note that all
columns now have descriptions:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Transaction type / statistics.type
SIP mode / statistics.other
Item number / statistics.itemnumber
Koha item type / statistics.itemtype
Shelving location / statistics.location
Borrower number / statistics.borrowernumber
Collection / statistics.ccode
Patron category / statistics.categorycode
Interface / statistics.interface
9. Sign off :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 28 Aug 2023 14:42:49 +0000 (14:42 +0000)]
Bug 30579: (follow-up) Add fieldsets and style disabled elements
This patch surrounds each section with a fieldset which allow enabling/disabling
all the elements in one go. CSS is added to make it clear which fields are disabled.
Button for item specific is moved form the multi-hold section
Javascript is simplified to use the new fieldsets
To test:
1 - Repeate test plan on earlier commit
2 - Additionally, search and select multiple records and place hold
3 - Confirm multi-hold placing works :-)
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 23 Sep 2022 15:06:05 +0000 (15:06 +0000)]
Bug 30579: Disentangle multi-hold and single bib forms
This patch alters the structure of the hold request page to make it clear
that "Hold next available", "Hold item group", and "Hold specific item" are
mutually-exclusive options.
While there is some duplication from this, it makes the sections easier to read
and allows for more variation in the two forms
To test:
1 - Find a bib with multiple items
2 - Enable item groups and item group holds in system preferences
3 - Load the records detail page
4 - Add an item group on the item groups tab
5 - Select two items and add to the group
6 - Click the 'Holds' tab and search for/select a patron
7 - Confirm the three levels of holds are clear
8 - Confirm checking the radio next to one disables the others
9 - Check 'Hold next available item from an item group'
10 - Do not select an item group
11 - Click 'Place hold' and confirm you are notified of need to select an item group
NOTE: if you are overrirding you may also have an alert that the items cannot normally be put on hold
12 - Click 'Place hold on a specific item' - but do not select an item
13 - Click place hold and confirm there is an alert and you cannot continue
14 - Click 'Hold next available item' and place hold
15 - Hold is successfully placed
16 - Place another hold for the same patron
17 - Only the 'Hold next available item' form is enabled
18 - Confirm you cannot switch hold type
19 - Place hold
20 - Select a new patron and place an item group hold
21 - Select the same patron and place another hold - you are forced to place an item group hold
22 - Select a new patron and place a hold on a specific item
23 - Place a second hold, confirm you can only place it on a specific item
Signed-off-by: hinemoea <hinemoea@inlibro.com> Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 09:04:08 +0000 (10:04 +0100)]
Bug 36396: Export/import the yaml config
Test plan:
Export the ES fields/mappings using
misc/search_tools/export_elasticsearch_mappings.pl > mappings.yaml
Copy this file to admin/searchengine/elasticsearch/mappings.yaml
Reset the mapping from the UI
Notice that the links to the AV categories have been preserved
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 08:23:19 +0000 (09:23 +0100)]
Bug 36396: UI - OPAC
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 22 Mar 2024 08:29:45 +0000 (09:29 +0100)]
Bug 36396: Prevent link to av for 'specials'
See previous commit message, 'QA' part.
We do not support the "specials" categories.
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 15:48:56 +0000 (16:48 +0100)]
Bug 36396: Link facet with authorised value category - ES
This new feature adds the ability to link an ES facet to an authorised
value category, in order to display a description instead of the code.
Test plan:
1. Go to the ES mapping admin page
2. Notice the new "Authorized value category" column in the facets
config table
3. Create a new facet that is linked to a search field containing values
from an authorised value category. Pick this category in the list
4. Save
5. Reindex
6. Notice that the descriptions are now displayed (staff and OPAC) in
the search result page.
QA: See the related bug report for possible improvements. It's not
easy at all to deal with the "specials" here, a lot of changes must be
done in how we fetch/cache the AVs.
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 14:51:44 +0000 (15:51 +0100)]
Bug 36396: DBIC schema changes
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 21 Mar 2024 14:45:11 +0000 (15:45 +0100)]
Bug 36396: DB changes
Add the new DB column search_field.authorised_value_category
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When languages come into facets in ES, Koha should know
the names for the codes used records. Otherwise
the three-letters language code is being displayed in
the facet instead of name. Koha now knows about 77
languages, many are still missing.
The most missed 76 languages, in order of occurrences
in my data sets, are (MARC 21 codes): grc, syr, chu, cop, arc,
ang, epo, syc, gez, sla, san, csb, akk, gmh, egy, wen, gle,
fro, rom, mac, mal, uga, mis, sem, sux, pli, bos, che, dum,
kaz, tib, enm, frm, mlt, got, nds, ira, lin, uzb, ave, cho,
jrb, bnt, pal, tut, goh, hsb, inc, mlg, roa, cel, sam, bem,
fur, gem, hit, lad, nah, ota, peo, pro, tat, wel, yor, bra,
den, hau, her, kas, mga, myn, nya, pra, que, tir, tuk.
Plus: gwi, dgr, chp asked in bug 23693.
Here, I do not put language codes which are extremely rare
in my data sets.
Subtags and names for language_subtag_registry are taken from
https://www.iana.org/assignments/language-subtag-registry/language-subtag-registry,
English names for language_descriptions.description - from
https://www.loc.gov/marc/languages/language_code.html, and Polish names -
from https://przepisy.bn.org.pl/aneksy#25-kody-jezykow---marc-21.
Test plan:
==========
1. Hava a ES installation with reasonable number of records,
with a variety of languages in 008/35-39 not present in
Koha (you can modify your record with codes from the list above).
Set FacetMaxCount to a high number (like 500 or so,
dependiing on the size of your data set).
2. Do a search, like '*a*'.
3. Controll the content of the Language faset -- you should
see some bare codes instead of language names.
4. Apply the patch -- update the database.
5. Perform the same search.
6. You should see the names in place of the codes.
7. Optionally, you can activate the Polish translation and
you should be able to see Polish names for the added languages.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thomas Klausner [Mon, 6 May 2024 12:39:35 +0000 (12:39 +0000)]
Bug 36151: Update leaflet.js
Koha currently comes with leaflet.js 1.0.3 which is quite old (2017).
For GeoSearch (Bug 31652) we need a more current leaflet.js, so this
patch updates leaflet.js to the current version 1.9.4
Test plan:
* Go to staff /cgi-bin/koha/admin/usage_statistics.pl where you see a
map and can set the location of the library by clicking on the map.
* Apply the patch
* Again, go to staff /cgi-bin/koha/admin/usage_statistics.pl
* Do a complete reload of the page
* It should still work:
* Display the location as a pin
* Set a new location
There was no code change necessary besides downloading the current
version of leaflet.js and updating the about-page
Sponsored-by: Geosphere Austria Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 3 May 2024 14:07:44 +0000 (14:07 +0000)]
Bug 35169: (QA follow-up) Fix up syspref language and group them together
The language used in the syspref preferences was a bit confusing.
Also, it makes sense to keep these two together on the page as they
are intrinsically linked.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Sat, 9 Mar 2024 17:53:13 +0000 (17:53 +0000)]
Bug 35169: (follow-up) perltidy
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 29 Apr 2024 20:39:08 +0000 (20:39 +0000)]
Bug 36709: Add confirm flag to update_localuse_from_statistics.pl script
To test:
1. APPLY PATCH and restart all
2. Run the update_localuse_from_statistics.pl script without a confirm flag, nothing happens.
3. Run the script and add the --confirm flag, stuff happens.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 30 Apr 2024 10:18:12 +0000 (10:18 +0000)]
Bug 36730: (Bug 35428 follow-up) po files (sometimes) fail to update
Under some circumstances (e.g. non-standard disk latency) po files fail
to be generated. The output from the gulp po:update --lang xx-XX task
is than like this:
[10:01:39] 'po_update_staff' errored after 6.41 s
[10:01:39] Error: ENOENT: no such file or directory, open '/tmp/koha-5WCc9s/Koha-staff-prog.pot'
This is due to the time dependencies inside the function flush (callback)
(in the function xgettext) in gulpfile.js. It happens that the
/tmp/koha-NNNNNN folder gets deleted before the asynchronous callback
function called by fs.readFile is completed. The callback should copy
the content of the .pot file from /tmp/koha- to its final destination,
while, in parallel in fact, the folder inside /tmp is being removed.
This creates a race condition.
Test plan:
==========
Hard to reproduce. But the race condition found in the code should
be obvious.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log