In acqui/parcel.pl both the "Pending orders" and "Already received" tables show how many holds there are for the given record. However, the count of holds in the "Pending orders" table confuses librarians because it only lists holds for the particular items in the orderline. Due to that, the holds column may show 0 holds even if there are a dozen record level holds for that bib! This is not what librarians seem to expect, instead it seems that the same total holds in the "Pending orders" table would be preferred.
Test Plan:
1) Find an invoice with an item in the "Already received" table
2) Add one or more record level holds to the record
3) Note the holds column does not count those holds
4) Apply this patch
5) Note the holds column now shows total holds and holds for just those ordered items
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nancy Keener <nkeener@washoecounty.us> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 19812: (QA follow-up) Swap sides for total and item holds
Bug 19812: (QA follow-up) If 0 holds show '0' not '0 / 0'
Bug 19812: (QA follow-up) Remove unnecessary line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 3 Jan 2018 14:07:17 +0000 (14:07 +0000)]
Bug 19910: Use the delimiter syspref to name download link
To test:
1 - Set delimiter syspref to anything but comma
2 - Download report results as comma separated text
3 - They actually follow the syspref
4 - Apply patch
5 - Download link should now match pref selection
6 - Change pref, note link changes
7 - Verify things still work as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Victor Grousset <victor.grousset@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 6 Nov 2017 18:35:50 +0000 (15:35 -0300)]
Bug 19578: Remove MARC punctuation in notices (TT syntax)
Jenkins fails (run 287) on a test in t/db_dependent/Letters/TemplateToolkit.t:
With the historical syntax:
# Your request for an article from tQYRS (c3Av58O0P5xkkIGu) has been canceled for the following reason:
With the TT syntax:
# Your request for an article from tQYRS_ (c3Av58O0P5xkkIGu) has been canceled for the following reason:
The last character of the biblio's title has been removed because it's a punctuation character.
It comes from: C4::Letters::_parseletter
893 $val =~ s/\p{P}$// if $val && $table=~/biblio/;
The same replacement is done for patron's attributes too.
Test plan:
- Confirm that the new tests pass. That should be enough to confirm this change make sense.
Test plan (manual):
- Create a biblio with a title ending with a punctuation (like "with_punctuation_"), or any other fields of biblio/biblioitem
- Generate a notice which will display this field (CHECKIN for instance)
Use the historical syntax and the TT syntax, both should display the title without the punctuation character at the end
CHECKIN historical:
The following items have been checked in:
----
<<biblio.title>>
----
CHECKIN TT syntax:
The following items have been checked in:
----
[% biblio.title %]
----
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19223: Add methods to correctly handle plugin-generated output
This patch introduces two methods to be used by plugin authors:
->output
->output_html
They are basically wrappers for the helper methods from C4::Output
(output_html_with_http_headers and output_with_http_headers).
Plugin authors can use them, or keep the current flexibility of handling
the headers themselves in their code.
The KitchenSink plugin should be updated to highlight this.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Plugins.t
=> FAIL: The methods are not implemented
- Apply this patch
- Run:
k$ prove t/db_dependent/Plugins.t
=> SUCCESS: Tests pass, and they are meaningful
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19223: Unit tests for output and output_html methods
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19892: Replace numbersphr variable with Koha.Preference('OPACNumbersPreferPhrase') in OPAC
Test Case
1) Check that the following files have been changed properly.
opac/opac-search.pl
opac/opac-main.pl
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt
2)Apply bug
3) Check that there are no differences in behaviour as a result of the patch.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 23 Feb 2018 10:58:27 +0000 (10:58 +0000)]
Bug 20282: Match course reserve on holdingbranch
To test:
1 - Add a course (Course Reserves)
2 - Add an item to the course
3 - Ensure to change the holding branch for the course reserve
4 - Modify the course item
5 - Note the dropdwn for holding branch is unset
6 - Apply patch
7 - Modify the course item
8 - Dropdown should be correctly populated
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Mon, 12 Mar 2018 11:15:12 +0000 (07:15 -0400)]
Bug 20369: Analytics search is broken with QueryAutoTruncate set to 'only if * is added'
Test Plan:
1) Enable EasyAnalytics
2) Disable QueryAutoTruncate
3) Create an analytic record, add some host items to it
4) Browser to the analytics tab for the record
5) Click the link in the 'used in' column of the table
6) No search results
7) Apply this patch
8) Reload the page, now you get the analytic record!
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Josef Moravec [Wed, 3 Jan 2018 11:20:46 +0000 (11:20 +0000)]
Bug 19907: Fix email validation in patron edit form
Test plan:
0) Confirm that email validation is not working in add/edit patron form
1) Apply the patch
2) Edit/add patron, the e-mail validation should be working now
3) Ensure the password validation is still working (use test plan from
bug 19908)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt
Jonathan Druart [Mon, 26 Mar 2018 15:22:15 +0000 (12:22 -0300)]
Bug 20462: Ensure batch item deletion will not delete the same item twice
This has been done on bug 9509 when barcodes are scaned, but not when using a text file.
Test plan (stolen from Barton on the bug report):
1) Create a text file containing duplicate barcodes
Here's a quick way to do that, substitute INSTANCE for the instance name of your test server:
sudo koha-mysql INSTANCE <<< "select barcode from items where barcode is not null limit 3" | sed '1d;p' > /tmp/dup_barcodes.txt
2) Go to Home › Tools › Batch item deletion
3) Click 'Choose File', select the file you created in step 1.
4) Click 'Continue'
5) Note that duplicate items appear in the list of items to batch delete
6) Check 'Delete records if no items remain'
7) This will trigger a software error
Note that entering the barcodes via the 'scan items one by one' text box removes duplicates in the list, so this only causes problems when uploading a file.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 20318: Merge invoices can lead to an merged invoice without Invoice number
When you want to merge invoices you have a page with a non editable
field 'Invoice number:' it shows the content of the first invoice to be
merged.
But if you validate by clicking the 'merge' button you arrive on the
next page which says that 'Invoice has been modified' and if you quit
this page without saving you have now a merged invoice without Invoice
number.
This tiny patch just prevents this issue to occur.
Test plan :
1° go to the acqui/invoices.pl page and search invoices to merge.
You must have at least 2 invoices on the same vendor
2° check boxes to select invoices to merge and click on 'merge selected
invoices' button
3° next page you see the non editable field 'Invoice number:'
4° click on the 'merge' button
5° next page you see 'Invoice has been modified'
6° leave this page i.e click on the left link 'Invoices'
7° search invoices you'll see the merged invoice without invoice number.
Apply the patch, replay the steps 1 to 3
4° on this page you can enter your invoice number and click on the
'merge' button.
If you leave this field empty and click merge, a message informs you
that it is required and you can not merge.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/acqui/invoices.tt
Jonathan Druart [Thu, 21 Dec 2017 18:59:24 +0000 (15:59 -0300)]
Bug 18474: Restore multiple holds when patron is searched for
We lost the ability to place multiple holds when we are searching for
patrons. The multi_holds parameter is lost and not handled correctly in
the template.
Test plan:
- Make sure you can place multiple holds for a patron you will search for
- Same for simple hold
TODO the multiple holds view should not be displayed if only 1 record
has been selected from the search result.
Signed-off-by: claude brayer <claude.brayer@cea.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 13 Mar 2018 14:57:47 +0000 (14:57 +0000)]
Bug 20385: Don't try to get info for bad authtypecodes
TO test:
0 - Have a koha with ES enabled and some auth records
1 - backup your db
2 - sudo koha-mysql <<instance>>
3 - UPDATE auth_types SET authtypecode="PERSO_NAMB" WHERE
authtypecode="PERSO_NAME" (or adjust as necessary)
4 - Search for some authorities where a PERSO_NAME record will be
returned
5 - KA_BOOM!
6 - Apply patch
7 - Results are returned, they do not display a code, viewing record you
won't see code
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lari Taskula [Wed, 28 Mar 2018 21:19:52 +0000 (21:19 +0000)]
Bug 20490: Correct bug number typo in comment in Circulation.t
NOTE: Confirmed that the typo of 17641 was part of bug 17941.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 28 Mar 2018 12:42:19 +0000 (12:42 +0000)]
Bug 19564: (QA follow-up) Make commented out tests pass
We likely shoudln't pass through an uncoverted sort order for now, but
it does allow us to look ahead to implementing the orders directly so
seems a good option to have.
Either this patch should be used, or the commented out tests should be
removed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 22 Dec 2017 18:21:51 +0000 (15:21 -0300)]
Bug 19564: Add tests for _convert_sort_fields
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19564: Fix extraction of sort order from sort condition name
Currently sort order is extracted from sort condition by splitting the
field, instead use regular expression to extract the last part preceded
by underscore.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 21 Dec 2017 00:35:47 +0000 (21:35 -0300)]
Bug 19673: Allow to set patron attributes to 0 with batch patron modification
This patch will have to be tested deeply to make sure it will not
introduce regression!
The idea is to display an empty option in the patron attributes select
and ignore it. That way we can deal with false values 0 and "" which
were skipped before.
Test plan:
Add several patron attributes
Use the batch patron modification tool to add/update/remove them
Play with empty "" and 0 values, as well as other values
Modify several attributes in a row
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/modborrowers.tt
Nick Clemens [Thu, 4 Jan 2018 15:31:52 +0000 (15:31 +0000)]
Bug 19916: Add keyword and standard ID fields to acq external search
To test:
1 - Add an order from external source
2 - Note you don't have keyword or standard ID fields
3 - Add a catalog record from Z3950, note those fields are there
4 - Apply patch
5 - Check acq and note you do have those fields
6 - Do some searches to verify they work as expected
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Pasi Kallinen [Mon, 5 Mar 2018 07:09:28 +0000 (09:09 +0200)]
Bug 20330: Allow translating more of quote upload
Translate the error messages, and the table headers.
Test plan:
1) Go to Home -> Tools -> Quote editor -> Import quotes
2) Upload quotes from a file. Try to trigger the error messages
3) On successful import, check the table header texts
4) Apply patch, update & install a language
5) The error messages and the table header texts should
show up in the xx-YY-staff-prog.po
6) Repeat 1,2,3
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/quotes-upload.tt
Jonathan Druart [Mon, 26 Mar 2018 16:13:58 +0000 (13:13 -0300)]
Bug 20455: Fix sort patrons by date expired
We may need to apply this change for all other occurrences in our
codebase.
Test plan:
- Make sure sample patron data is loaded and you have a patron without a
date expired defined
- Make an empty search for all patrons or another search that gives you
a good amount of results
- Try to sort on the date expired column
=> Without this patch you get
Odd number of elements in anonymous hash
at /home/vagrant/kohaclone/C4/Utils/DataTables/Members.pm line 189.
output_pref is called with 'dateonly' (ref SCALAR), not a DateTime
object
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Claire Gravely [Tue, 13 Mar 2018 11:18:33 +0000 (11:18 +0000)]
Bug 20386: Improve warning and error messages for Search Engine Configuration
This patch updates a warning message and error message in the Search
engine configuration for Elasticsearch.
Note: elasticsearch does not need to be active in order to test.
To test warning message:
1. go to: cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
2. note the warning message
3. Apply patch
4. Note the change in warning message. Confirm it makes sense.
To test error message:
Apply patch and check the changed message in the template file mappings.tt and confirm it makes sense.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Mon, 12 Mar 2018 15:56:45 +0000 (15:56 +0000)]
Bug 19582: (follow-up) get params in correct order
We were ordering the values out of sync with the order of the mathclist
param and so causing 'entire record' and 'all headings' to be reversed
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 7 Nov 2017 01:24:56 +0000 (01:24 +0000)]
Bug 19582: Unit tests
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Mon, 6 Nov 2017 17:14:34 +0000 (17:14 +0000)]
Bug 19582: Use compat routines for searching authorities in auth_finder.pl
To test:
1 - Enable Zebra
2 - Perform an auth search
3 - note results
4 - Enable ES
5 - Repeat search, note (likely) diff results
6 - Open a record in cataloging and use the button to launch auth search
7 - Perform same search as above, note results match for eiher engine
selected
8 - NOTE: Disbale sorting for ES search - this will be dealt with in
another report
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 27 Mar 2018 15:21:41 +0000 (12:21 -0300)]
Bug 20474: Mimick Letters.t
Please improve if needed the 2 occurrences on a separate bug reports.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Mon, 26 Mar 2018 15:39:28 +0000 (15:39 +0000)]
Bug 20474: Mock sendmail instead of actually emailing
Copy mocking sendmail code from t/db_dependent/Letters.t
into the Passwordrecovery.t test file.
prove t/db_dependent/Passwordrecovery.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Mon, 26 Mar 2018 16:46:19 +0000 (16:46 +0000)]
Bug 20474: Explicitly call sendmail to make mocking work
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Mon, 4 Dec 2017 09:04:48 +0000 (10:04 +0100)]
Bug 19739: Add default ES configuration to koha-conf.xml
Bug 18571 added default ES configuration for packaging config.
This patch adds it to dev install in koha-conf.xml.
Database name is used in index_name to allow multiple installs.
Test plan :
- Run dev install
- Install ElasticSearch server and Koha deps
- Enable ElasticSearch in Koha
- Check indexing and searching works directly
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Charles Farmer [Fri, 19 Jan 2018 21:04:19 +0000 (16:04 -0500)]
Bug 19955: Minor grammatical correction
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 11 Jan 2018 18:00:31 +0000 (13:00 -0500)]
Bug 19955: Add ability to process only one 'type' of message ( sms, email, etc ) for a given run of process_message_queue.pl
It would be nice to allow emails to be sent overnight, but limit the sending of SMS messages to hours when people are awake. Adding a type limit to process_message_queue.pl would allow this to be accomplished easily.
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Victor Grousset [Thu, 22 Mar 2018 14:44:00 +0000 (15:44 +0100)]
Bug 20461: Serials: fix ignored params in subscription creation form
In subscription-add.pl, the two params aren't passed to
NewSubscription() but they are to ModSubscription()
== Test plan ==
1. Enable syspref "makePreviousSerialAvailable"
2. Create a minimal subscription with a value in the "Item type" and
"item type for older issues" fields.
3. Edit the subscription
4. You should see that the two fields are empty. This is the bug.
5. Apply this patch
6. Do step 2 and 3
7. You should see that the two fields have the right value
8. Express the joy of a successful and easy sign off.
(this is important, otherwise the sign off spell won't work!)
Signed-off-by: delaye <stephane.delaye@biblibre.com> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Fri, 23 Feb 2018 13:29:48 +0000 (14:29 +0100)]
Bug 20067: Fix other checks for linked authorised value categories
The same pattern was used in other files, this patch fixes it.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Fri, 23 Feb 2018 13:20:17 +0000 (14:20 +0100)]
Bug 20067: Fix false display of authorised value for materials on staff detail page
Koha didn't check for a linked authorised value category for
Koha didn't check for a linked authorised value category for
items.materials correctly which led to displaying false information
on the detail page.
To test:
- before applying the patch:
- make sure sample data and configuration is loaded
- edit any item
- write 2 in the $3 materials specificed
- check the details page normal view - it will display 'restocking'
- apply patch
- check display, it should now show "2"
- link 952$3 (MARC21) to ORDER_CANCELLATION_REASON
- check display again, it should now show 'restocking'
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 2 Jan 2018 18:42:12 +0000 (15:42 -0300)]
Bug 18593: Move suggestions when bibliographic records are merged
When bibliographic records are merged, the suggestions.biblionumber
field should be replaced with the new record.
Ideally we should have kept an history of the merges, to know what was
the original record. Now we cannot fix the broken links.
Test plan:
1) Create a suggestion in OPAC
2) Accept the suggestion in staff
3) Add order from this suggestion
4) Go to cataloguing search and search for the record and another
5) Merge the suggestion record with the catalog record - catalog record wins (should be the more common case when a patron suggests something that already exists)
6) Verify that after merging, the new title displays in the acquisition record
7) Verify that the suggestion info no longer displays in basket
From Katrin's test plan:
8) Verify that the new title doesn't display in suggestions. The old title will still show as suggested (not updated)
=> This is the title from suggestions.title, I think it makes sense to show this one.
Maybe we should open a new bug report to improve the display of the suggestion, and link to the bibliographic record
Signed-off-by: Lucie Gay <lucie.gay@ens-paris-saclay.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Mon, 12 Mar 2018 10:51:59 +0000 (11:51 +0100)]
Bug 11936: (QA follow-up) Consistent log message for item insert
Fix the same error in another place
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Magnus Enger [Thu, 22 Feb 2018 09:37:08 +0000 (10:37 +0100)]
Bug 11936: Consistent log message for item insert
If you use bulkmarcimport.pl to import records with items it looks
like the successfull insert of the record is reported multiple time,
but the second and subsequent "ok" is really related to importing
the item(s).
This patch changes the log message on successfully inserting an item
to match the log message given when inserting an item fails.
To test, the easy way:
- Look at lines 530 and 536 of bulkmarcimport.pl, and note that the
"op" in those two lines are different
- Apply the patch
- Look at lines 530 and 536 again, and note that the "op" is now
identical, and that this makes sense, since they are both related
to the same operation, specifically inserting an item
To test, the hard way
- Have some records with items
- Import the records with bulkmarcimport.pl, and make sure to specify
the -l option, to create a log of the actions taken
- Look at the log and verify it looks something like this:
id;operation;status
1;insert;ok
1;insert;ok
2;insert;ok
2;insert;ok
- Apply this patch and import some more records with items. The log
should now be similar to this:
id;operation;status
1;insert;ok
1;insertitem;ok
2;insert;ok
2;insertitem;ok
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 13 Mar 2018 10:15:31 +0000 (10:15 +0000)]
Bug 20383: Hide link to plugin management if plugins are not enabled
This patch adds a check in admin-home.pl to see whether plugins are
enabled. If plugins are disabled, the link to plugins management is
hidden even if the user has plugin management permission.
To test, view the administration home page with plugins enabled and
disabled via the enable_plugins flag in the Koha configuration file.
Also test using users with different plugins permissions:
- Plugins enabled
- CAN_user_plugins = 1
-> Plugins link appears
- CAN_user_plugins = 0
-> Plugins link hidden
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 12 Mar 2018 12:56:08 +0000 (12:56 +0000)]
Bug 20372: Correct toolbar markup on some pages
Differences in markup around some toolbars has the potential to create
CSS styling problems. This patch changes the markup to be consistent
with other instances of <div id="toolbar"></div>
On each of these pages the toolbar should look correct.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Maksim Sen [Mon, 12 Mar 2018 20:15:30 +0000 (16:15 -0400)]
Bug 20376: Make select/unselect all ignore disabled checkboxes on batch record deletion
Test Plan:
0.1 - find at least one biblionumber that has at least one item checked out
0.2 - find at least one biblionumber that has zero items checked out.
1 - Go into the module "Tools > Batch record deletion"
2 - in "List of biblionumbers or authority ids (one per line)" put the values you found in step 0.1 and 0.2
3 - click continue
4 - biblionumbers with at least one item checked out should not be clickable.
5 - biblionumbers with zero items checked out should be clickable.
6 - click "Select all" and "Clear all", both buttons should change the "checked" status of the enabled AND disabled biblionumber checkboxes.
7 - apply patch
8 - click "Select all" and "Clear all", both buttons should change the "checked" status of ONLY the enabled biblionumber checkboxes.
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/batch_delete_records.tt
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Tue, 31 Oct 2017 02:28:58 +0000 (02:28 +0000)]
Bug 19547: Deal with --create-db missing debian.cnf issue
Followed test plan. Patch functions as described and both commands execute. Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Mon, 30 Oct 2017 21:59:43 +0000 (17:59 -0400)]
Bug 19547: MariaDB install has no debian.cnf
This attempts to handle issues arising when running
koha-create on a system that never had MySQL installed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Fri, 9 Mar 2018 11:54:16 +0000 (11:54 +0000)]
Bug 18570: (QA follow-up) Improved POD
This tweaks the perldoc for SendQueuedMessages and adds
some for _get_unsent_messages.
TEST PLAN
---------
perldoc C4::Letters
-- look at _add_attachments (ugly), _get_unsent_messages (non-existent),
SendQueuedMessages (no reference to borrowernumber or letter_code).
apply patch
perldoc C4::Letters
-- confirm that SendQueuedMessages and _get_unsent_messages
have reasonable POD information.
-- notice how _add_attachments' POD is now readable
run koha qa test tools
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Thu, 8 Mar 2018 00:15:33 +0000 (00:15 +0000)]
Bug 18570: Send Password Reset Emails immediately
Run through the password reset process, and your server
should send the message immediate, not waiting for the
cronjob.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Thu, 8 Mar 2018 00:13:09 +0000 (00:13 +0000)]
Bug 18570: Prove that the letter code parameter tweaks work
Run the following commands:
kshell
prove -v t/db_dependent/Letters.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Wed, 7 Mar 2018 23:59:54 +0000 (23:59 +0000)]
Bug 18570: Tests to prove if email send was attempted
kshell
prove -v t/db_dependent/Passwordrecovery.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 16 Mar 2018 08:02:36 +0000 (09:02 +0100)]
Bug 20430: (See also bug 19436) Button display depends on wrong server count
This is a QA follow-up of bug 19436, submitted separately for ease of
backporting it. (The bug was not raised by 19436.)
Obviously, the number of authority servers not biblio servers should
be the key factor for showing or hiding the button for new authority
records via Z39.50/SRU.
Trivial fix.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Tue, 6 Mar 2018 11:26:19 +0000 (12:26 +0100)]
Bug 20341: Show authorized value description for withdrawn like damaged and lost
Actually catalog detail page shows for damaged and lost items the authorized value description if exists.
We must do the same for withdrawn information.
Test plan :
1) Set for items a subfield linked to items.withdrawn and using the authorized value category 'WITHDRAWN'
2) Edit the authorized value category to add value '2' and description 'Eaten by dog'
3) Edit an item to set this withdrawn value
4) Go to staff interface and look at items in record detail page /cgi-bin/koh/catalogue/detail.pl :
=> Without patch you see 'Withdrawn' and with patch you see 'Eaten by dog'
5) Go to OPAc and look at items in record detail page /cgi-bin/koha/opac-detail.pl :
=> Without patch you see 'Withdrawn' and with patch you see 'Eaten by dog'
Signed-off-by: delaye <stephane.delaye@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Mon, 5 Feb 2018 08:25:03 +0000 (08:25 +0000)]
Bug 19908: Do not use .optional in password match validation function
Test plan:
0) Aplly only first patch
1) You will be able to submit a from on member-password.pl even if the
passwords don't match
2) Apply this patch -> you can't be able to submit the form if the
paswords don't match, but you'll be able to submit the form when
password fields are blank
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Wed, 3 Jan 2018 10:56:37 +0000 (10:56 +0000)]
Bug 19908: Password fields in edit/add patron form should respect BorrowerMandatoryField preference
Test plan:
0) Do not apply the patch, note the password field is always required
1) Apply the patch
2) Try to add and edit patron with and without "password" in BorrowerMandatoryField, it should always respect this setting
3) Use "Change password" button in patron toolbar, the password field
should be never required here - when leaved blank, the password is
unchanged
4) Play with minPasswordLength and RequireStrongPassword preferences,
to ensure they work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/members/member-password.tt
koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Victor Grousset [Fri, 5 Jan 2018 14:03:38 +0000 (15:03 +0100)]
Bug 19953: Record page: acquisition details: add column for invoice
Test plan:
1. create a vendor with minimal info
2. create a basket with minimal info
3. add a item to the basket
4. close the basket
5. receive a shipment
6. on the "receipt summary" click on "receive" for the wanted item (it
should be the only one)
7. items → receive? → tick this checkbox
8. save
9. click on "finish receiving"
10. go to the record → Acquisition details
11. apply this patch
12. refresh the page
13. you should see the new column
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Josef Moravec [Fri, 9 Mar 2018 06:58:34 +0000 (06:58 +0000)]
Bug 12812: (Follow-up) Fix use of C4::Circulation
Fixes this error:
Undefined subroutine &main::MarkIssueReturned called at
misc/cronjobs/longoverdue.pl line 316.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The longoverdue.pl option --mark-returned doesn't work unless the
--charge option is used as well.
Test Plan:
1) Run long overdue with --mark-returned and not --charge,
note your items are marked lost but not returned
2) Apply this patch
3) Repeat step 1, the items should now get returned!
Tested with (for example):
misc/cronjobs/longoverdue.pl --lost 10=1 --mark-returned --verbose
--confirm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 5 Mar 2018 10:30:15 +0000 (11:30 +0100)]
Bug 17717: (QA follow-up) Fix typo chdir
This test does obviously not achieve the desired result:
[ "chdir" != "no" ]
Trivial fix.
Adding the same quotes around starting_dir (just as for Bug 19546).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 17717: Make cronjobs using koha-foreach use --chdir
In order to patch production sites we need to adjust the shipped
cronjobs so they are called with the --chdir option switch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 17717: Add a --chdir option switch for koha-foreach
Until Perl 5.26, the current directory is added to @INC when running a
Perl script [1]. Having the current directory in @INC means it can be
tried to be traversed when performing a lib lookup. Since version 5.18,
Perl dies when it finds an unreadable directory (permissions) in @INC
that needs to be traversed. This behaviour won't change because Perl
devs consider it an enhancement to security. [2]
Because of this, we need to make sure our scripts are ran **from** a
directory in which they have read permissions.
Ths patch adds a --chdir option switch to the **koha-foreach** wrapper
script, that makes the inner shells/scripts to be ran within the Koha
instance's user home directory.
The change is trivial and should be QAed easily. I tested this on a prod
server:
- Create a /tmp/test.pl file containing:
use Modern::Perl;
use Cwd;
my $dir = getcwd;
warn $dir;
1;
A) then create a cronjob entry to run it using koha-foreach:
(in /etc/cron.d/test):
1/* * * * * root koha-foreach perl /tmp/test.pl
- Once I noticed the cronjob ran, I used mutt to read the emails in the
root user.
=> FAIL:
...
Subject: Cron <root@koha> koha-foreach --enabled perl /tmp/test.pl
"/root"
"/root"
"/root"
"/root"
"/root"
...
B) I then used the patched koha-foreach with different results:
=> SUCCESS:
...
Subject: Cron <root@koha> /root/koha-foreach --chdir --enabled perl /tmp/test.pl
C) master's koha-foreach seems to work just the same... I think it is
because of my previous attempt to fix this by using sudo in koha-shell.
So I think environmental conditions affect the behaviour (which shell is
configured for cron, sudo configuration, etc).
====
In conclusion, I think we should go ahead with this patch as it will solve
peoples issues, and it is a right solution (option #5 on the list) to
this Perl behaviour change. It doesn't cover other commands, but
followup patches could do.
I avoided /tmp as it is writable by any user... so it is an easy path
for both exploiting by replacing some lib, and also because the
existence of an unreadable dir that the interpreter could try to
traverse (unreadable /tmp/Authen or /tmp/Koha will trigger the same
error, and I assume people know what they are putting on the instance's
dir, at least it will be easier to track).
A followup patch takes care of making the cronjobs use --chdir when
calling koha-foreach
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 27 Feb 2018 18:30:18 +0000 (15:30 -0300)]
Bug 20286: Fix filter for BakerTaylor* prefs
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Mon, 26 Feb 2018 13:48:18 +0000 (10:48 -0300)]
Bug 20286: Correctly escape URI characters in OPAC RSS template
Bug 19568 use the TT filter url whereas it must have escaped the URI
characters with the uri filter.
Test plan:
Subscribe to an OPAC search
=> Without this patch you will get an empty page
=> With this patch applied you will see result list.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20234: Update service description in koha-common.init
The service description is very old and outdated. This patch fixes this.
Sponsored-by: Orex Digital Signed-off-by: Hugo Agud hagud@orex.es Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 20234: Make maintenance scripts use koha-zebra instead of koha-*-zebra
This patch makes all maintenance scripts use **koha-zebra** instead of
the old **koha-*-zebra** scripts.
To test:
- Run:
$ perl misc4dev/cp_debian_files.pl
$ sudo service koha-common stop
=> SUCCESS: No errors and the Zebra-related sevices are stopped
$ sudo service koha-common start
=> SUCCESS: No errors and the Zebra-related services are started
$ sudo service koha-common restart
=> SUCCESS: No erros and Zebra-related services are running
$ sudo koha-create --create-db test
=> SUCCESS: Instance created and zebra running for it
$ sudo koha-disable test
=> SUCCESS: No errors and Zebra is stopped for instance test
$ sudo koha-zebra --start test
$ sudo koha-remove test
=> SUCCESS: No errors, instance removed, no Zebra running for test
- Sign off :-D
Sponsored-by: Orex Digital Signed-off-by: Hugo Agud hagud@orex.es Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Pasi Kallinen [Tue, 27 Feb 2018 10:59:56 +0000 (12:59 +0200)]
Bug 20302: Allow translating Delete button in Patron batch mod tool
There is an untranslatable Delete-button in the patron batch modification
tool. Allow translating it.
Test plan:
1) Go to Home -> Tools -> Batch patron modification, put a patron's
card number in the box, and click on Continue
2) At the bottom of the screen there is an drop-down entry for
Attribute, click on the "New" at the nd of that line
3) There should now be another Attribute -line, with "Delete" -link
at the end of that line
4) Apply patch, install a language
5) Repeat 1-3 in that language, the Delete-link should be shown in
the correct language, if the msgid "Delete" was translated
in xx-YY-staff-prog.po
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/modborrowers.tt
Pasi Kallinen [Tue, 27 Feb 2018 07:10:17 +0000 (09:10 +0200)]
Bug 20301: Allow translating "View" in manage MARC import
When looking at the table showing the staged MARC records, the "View"
text in the Diff-column is not translatable. Make it so.
Test plan:
1) Go to Home -> Tools -> Stage MARC records for import
2) Select eg. t/db_dependent/www/data/marc21record.mrc and upload the file
3) Click on Stage for import
-> Manage staged records
-> Import this batch into the catalog
4) Wait for zebra to reindex, or trigger it yourself by
running rebuild_zebra.pl -a -b -r
5) Go to Home -> Tools -> Stage MARC records for import
6) Select the same file as in part 2 and upload the file
7) Change the Record matching rule to ISBN (020$a)
8) Click on Stage for import
-> Manage staged records
9) In the table below, there should now be a line showing
the staged MARC record matches biblio
10) Note the "View"-text in the "Diff"-column
11) Apply patch
12) Install a language, view the same batch in the
Manage staged MARC records -page in that language
13) The "View" should show up correctly, and if the
msgid "View" was translated in the xx-YY-staff-prog.po,
should show up in the correct language
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Pasi Kallinen [Tue, 6 Feb 2018 10:19:17 +0000 (12:19 +0200)]
Bug 20141: Untranslatable string in transport cost matrix
Make the "Disable" checkboxes in transport cost matrix translatable
Test plan:
1) Go to Home -> Administration -> Transport cost matrix
2) Click on any cell
3) Note the "Disable" checkbox text
4) Install patch, add a language, translate the text, etc
5) Repeat 1-3, the "Disable" text should now be translated
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/admin/transport-cost-matrix.tt
Pasi Kallinen [Mon, 26 Feb 2018 10:08:27 +0000 (12:08 +0200)]
Bug 20296: Untranslatable "All" in patrons table filter
There's an untranslatable "All" in the "Show X entries" filter
when browsing the patrons.
Test plan:
1) Home --> Patrons --> Browse by last name.
2) In the table filtering toolbar, there's a dropdown with
"Show [20] entries" and the last in the dropdown is "All".
3) Update and install a language, check that msgid "All" is
translated and isn't fuzzy.
4) Check the "All" in the dropdown, it is not translated.
5) Install patch, repeat 1-3, and check the "All" in the dropdown,
it should now be translated.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/members/member.tt
Katrin Fischer [Tue, 20 Feb 2018 21:42:13 +0000 (21:42 +0000)]
Bug 20290: Fix capitalization of "Routling List"
This fixes some strings to be properly capitalized.
To test:
- Create a new routing list, check title and breadcrumbs
- View the routing list tab in the patron account in staff,
check title and breadcrumbs
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Pasi Kallinen [Tue, 6 Feb 2018 11:01:36 +0000 (13:01 +0200)]
Bug 20142: Allow translating offline circ message
Allow translating the notification saying you cannot change branch or
logout while offline.
Test plan:
1) Enable AllowOfflineCirculation
2) Go to Home -> Circulation -> Built-in offline circulation interface
3) Try to change your branch. Note the notification message
4) Apply patch, install language, translate the notification
5) Repeat 2 and 3 in that language. The message should be translated
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
koha-tmpl/intranet-tmpl/prog/en/modules/circ/offline.tt
Pasi Kallinen [Tue, 6 Feb 2018 12:17:45 +0000 (14:17 +0200)]
Bug 20147: Allow translating prompt in label edit batch
Fix one untranslatable prompt in the label batch edit.
Test plan:
1) Go to Home -> Tools -> Label creator
2) Click on New -> Label batch
3) Add items to the batch
4) Select any of the items
5) Click on "Remove selected items"
6) Note the popup text
7) Apply patch, update a language, translate the msgid
"Are you sure you want to remove label number(s): %s from this batch?"
8) Repeat 1-6. The popup text should now be translated.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 6 Apr 2018 15:40:56 +0000 (15:40 +0000)]
Bug 20140: Allow translating more of OAI sets
Allow translating two strings in the OAI set config:
"setDescription" and "Remove"
Test plan:
1) Go to Home -> Administrator -> OAI sets config -> Add a new OAI set
2) Click on "New set"
3) Click on "Add description"
4) Note the "setDescription:" and "Remove" -texts
5) Install patch, update language, translate the new strings
6) Redo 1-4, note how the strings in part 4 are now translated
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Roch D'Amour <roch.damour@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Owen Leonard [Wed, 21 Feb 2018 17:40:06 +0000 (17:40 +0000)]
Bug 20240: Remove space before : when searching for a vendor in serials (Vendor name :)
This patch removes the space before the colon in the "vendor" label in
the vendor search pop-up window.
To test, apply the patch and go to Serials -> New subscription.
- Click the "Search for a vendor" link next to the vendor form field.
- In the pop-up window, confirm that there is no space before the colon
in the "vendor" label.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 21 Feb 2018 17:59:49 +0000 (17:59 +0000)]
Bug 20239: Fix spelling on authority linker plugin
This patch corrects the capitalization of the "Choose" link in the
pop-up window for selecting an authority record to link to a MARC field.
This patch also converts the link, and the "Edit authority" link, to
Bootstrap buttons.
To test:
- Create a new record
- Go to the 100 field
- Click on plugin link behind $a
- Look for an existing authoriy in your system
- In the table of search results, confirm that the "Choose" and "Edit
authority" links look correct and work correctly.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 16 Feb 2018 15:23:26 +0000 (12:23 -0300)]
Bug 20229: Explicitly list the SQL modes we support
In our installation procedure we ask the administrator to edit the
MySQL|MariaDB configuration file to specify the SQL modes we support
(see bug 17258 comment 6 and 7 for more information).
We are on the way to catch and fix all these issues and support these
stricter modes (as they highlight problem in our codebase/DB structure)
but in the meanwhile it may be good to remove this step and revert the
changes when we are ready.
TODO:
- Remove that for dev installations (to let developers catch these bugs)
- Edit the wiki page to remove this step
Test plan:
0. Do not apply this patch
1. Edit your MySQL|MariaDB config and add:
sql-mode = "ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
to the [mysqld] section (or edit it)
2. Restart your DBMS
3. Try to make the app explode (watch the logs)
(tips: you should get "'koha_kohadev.me.id' isn't in GROUP BY" when
editing an order)
4. Apply the patch, restart_all, restart your DBMS
5. Try to recreate the failure
=> You should no longer see the error in the logs
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Tue, 30 Jan 2018 22:35:39 +0000 (22:35 +0000)]
Bug 20083: Follow up - use same logic in opac-showmarc
It was correctly pointed out that opac-showmarc would leak
the same way as catalogue/showmarc.pl, and so this patch
moves the authentication step up to the top where it
should be so as to prevent inappropriate data leaks.
TEST PLAN
---------
1) Set your OpacPublic system preference to Disabled
2) Open your OPAC and login
3) Find a biblio with items
4) Go to the opac details, particularly MARC view.
5) Copy the "view plain" shortcut link.
6) log out.
7) Paste the link into the address bar.
-- the information will leak!
8) apply the patch
9) restart_all
10) Refresh the OPAC link
-- log in screen will appear.
11) run koha qa test tools
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Andreas Roussos [Fri, 26 Jan 2018 01:12:47 +0000 (14:12 +1300)]
Bug 20083 - Information disclosure when (mis)using the MARC Preview feature
The MARC Preview feature in the Staff client (catalogue/showmarc.pl) does not
check whether a user is logged in or not. As a consequence, it can be used to
obtain information that would normally be available to logged-in users only.
For example, you can view any bibliographic record by passing a value to the
'id' argument, but you can also view records as they were imported (normally
done via the 'Staged MARC management' tool).
All three 17.11 installations currently listed at
https://wiki.koha-community.org/wiki/Koha_Demo_Installations
are affected by this issue, as demonstrated by the URLs below:
It should be noted that this only applies to XSLT-enabled installations.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Colin Campbell [Mon, 19 Mar 2018 10:45:26 +0000 (10:45 +0000)]
Bug 20446 Revert to using syspref for item creation
Using a per-basket setting is nonsensical when baskets
are created automatically by quote processing a few lines before
this attempts to read it. cron job aborts with a runtime error
leaving basket for quote half-created.
This reverts to the previous code using the global setting.
(Basket itself will have been set to the global setting
by default)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Lari Taskula [Fri, 9 Mar 2018 13:49:27 +0000 (15:49 +0200)]
Bug 20367: Avoid resetting userid when BorrowerUnwantedField contains userid
To test:
1. In staff client, set your username to firstname
2. Add userid to BorrowerUnwantedField system preference
3. Go to your patron modification screen (memberentry.pl) and click Save
4. Observe you get kicked out into login screen, saying:
Error: You do not have permission to access this page.
Log in as a different user
5. Apply patch and restart plack
6. Set your username back to firstname
7. Repeat step 3
8. Observe you were not kicked out and your userid stays the same
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jose Martin [Wed, 7 Mar 2018 12:21:39 +0000 (15:21 +0300)]
Bug 20348: SIP2 patron identification fails to use userid
Replaces "or" with "||" in variable assignment
second attempt to retrieve borrower was not being executed due
to changed precedence
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 27 Feb 2018 18:54:38 +0000 (15:54 -0300)]
Bug 20303: Do not explode when receiving an order if authorisedby not set
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20167: Make changing a hold pass the itemnumber to ModReserve
If you have an item-level hold, changing an attribute (like priority,
pickup location or suspended until date) makes the hold a biblio-level
hold, because ModReserve is not passed the current itemnumber.
This patch uses the hold's itemnumber and passes it to the ModReserve
call.
To test:
- Run the regression tests from the previous patch:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> FAIL: Tests fail
- Apply this patch
- Run the tests:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Conflicts:
t/db_dependent/api/v1/holds.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Fri, 16 Feb 2018 12:31:39 +0000 (12:31 +0000)]
Bug 20218: Fix matching of uri in tracklinks
The current code matches using a regex, this breaks when the url
contains special characters. We swtich it to equality check
To test:
1 - Enable TrackClicks (either track or anonymous)
2 - Find the URL of a biblio in the OPAC
3 - Paste this into the 856$u of another record
(or use any url containing a '?' or other characters)
4 - View the record in the opac
5 - Click the URL
6 - 404 Error!
7 - Apply patch
8 - Try again
9 - Success!
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Wed, 14 Feb 2018 20:19:01 +0000 (20:19 +0000)]
Bug 20201: Silence warnings triggered by admin/aqplan.pl
TEST PLAN
---------
0) back up DB
1) Run the following commands on a kohadevbox:
reset_all
git bz apply 20185
echo | sudo tee /var/log/koha/kohadev/plack-error.log
restart_all
2) Navigate in a staff client:
Home -> Administration -> Budgets -> Edit -> Planning by libraries
-- could be any of the planning, but by libraries is nicely visible
on screen.
3) Run the following commands:
cat /var/log/koha/kohadev/plack-error.log
-- several warnings.
4) Run the following commands:
git bz apply 20201
echo | sudo tee /var/log/koha/kohadev/plack-error.log
restart_all
5) repeat step 2 and refresh the staff client page.
-- this time warnings related to aqplan.pl are not there.
6) run koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Conflicts:
admin/aqplan.pl
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log