As said in the previous commit, I considered SetAge as unnecessary and
removed it.
Test plan:
1/ Edit a patron using the different 'Edit' links
2/ Play with the patron category limited to age ranges, and date of
birth
3/ You should get the expected warning if the date of birth is inside
the patron category date range.
To finish:
prove t/Circulation/AgeRestrictionMarkers.t t/db_dependent/Reserves.t \
t/db_dependent/Koha/Patrons.t t/db_dependent/Members.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 4 Nov 2016 16:18:00 +0000 (16:18 +0000)]
Bug 17557: Revised patron age calculation tests
The SetAge and GetAge test coverage are excessive.
First the SetAge subroutine was only created for testing purpose.
The goal of GetAge is quite simple and it seems quite easy to provide
corect test coverage using DateTime->add using negative numbers.
Edit: rebased so it applies
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 16203: Convert item plugins to new style (see bug 10480)
Converts item plugins to new style (with builder and launcher).
See also bugs 10480 and 13437.
The following plugins have been adjusted:
barcode_manual.pl
barcode.pl
callnumber-KU.pl
callnumber.pl
cn_browser.pl (Added license statement too)
dateaccessioned.pl
macles.pl
stocknumberam123.pl
stocknumberAV.pl
stocknumber.pl
Test plan:
Connect the plugin to an item field.
Verify that the plugin still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested if all plugins compile okay.
Ran most of them thru FrameworkPlugin.t.
Tested them in the item editor.
Note: the form for macles.pl comes up, further hard to test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Mon, 7 Nov 2016 09:32:54 +0000 (09:32 +0000)]
Bug 17472: Borrower Previously Checked Out: Display title
Test plan:
0) apply the patch
1) turn on checking previously checkouts - syspref CheckPrevCheckout
2) checkout an item to borrower
3) check the item in and check it out again, you should see the
dialog, with information that the current item was previously checked
out to this patron. With this patch, the information includes title and
author of the item
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 10 Oct 2016 09:52:51 +0000 (05:52 -0400)]
Bug 17418 - Move staff client home page JavaScript to the footer
This patch alters the header and footer include files so that JavaScript
can be included in either one or the other. As a proof of concept, the
staff client home page is updated to include JS in the footer instead
of the header.
The processing of JavaScript included on individual pages can now be
similar to how it is done in the OPAC. A block is created with the
page's JavaScript which is then processed in js_includes.inc in the
correct order, after other required js assets.
On pages which have been modified to allow JavaScript to be moved to the
footer you must add a variable to the template: [% SET footerjs = 1 %].
Eventually all staff client templates should be modified so that setting
a flag is not required.
"[% MACRO jsinclude BLOCK %]" is used instead of "[% BLOCK %]" and "[%
PROCESS %]" because MACRO allows the template directives to be
processed correctly when included by intranet-bottom.inc.
To test, apply the patch and view the staff client home page.
- Confirm that you get a confirmation when deleting a news item from the
home page.
- Enable the CircAutocompl system preference and test that patron
autocomplete works from the "Check out" tab from the staff home page
and from other pages where the "Check out" tab is present.
- Test that JavaScript is working correctly on other pages like
Circulation, Preferences, etc.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 12 Dec 2016 11:59:30 +0000 (06:59 -0500)]
Bug 17761 - Renewing or returning item via the checkouts table causes lost and damaged statuses to disappear
Due to the fact that the lost and damaged status are contained within the due_due span,
when the item is renewed or returned these statuses disappear.
Some librarians find this disconcerting and it seems that it would be better to keep the visible.
Test Plan:
1) Find a lost item checked out to a patron
2) Renew that lost item via the checkouts table
3) Notice the lost status disappears from that row
4) Apply this patch
5) Refresh the page ( you may want to clear your browser cache as well )
6) Renew the item again
7) The lost status should remain visible!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Edie Discher <edischer@cityoffargo.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Wed, 16 Nov 2016 10:02:34 +0000 (10:02 +0000)]
Bug 17700: Add columns setting to fines tables
Test plan:
0) Apply the patch and restart memcached + koha-common services if
needed
1) Go to adminitration -> Configure columns and confirm there is new
table configuration with id=account-fines in Patrons section available
2) play with table setting to ensure it works as expected
3) go to to boraccount page for some patron with both fines - payed and
owed
4) Note there is new button "Columns visibility" in top paginator panel,
try to use it
5) Play with the datatable, sort filter and so on
Signed-off-by: Radek Šiman <rbit@rbit.cz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 31 Oct 2016 14:39:40 +0000 (14:39 +0000)]
Bug 14876 - Show number of holds per record on the search results
This patch sues the existing plugin
Koha::Template::Plugin::Biblio->HoldsCount
To be consistent with current behaviour 'Holds (0)' is shown when
no holds have been placed on an item
To test:
1 - Search in staff
2 - Note holds link has no extra information
3 - Apply patch
4 - prove -v t/db_dependent/Template/Plugin/Holds.t
5 - Do search in staff that returns records with some holds (i.e. place
some holds)
6 - Note the number of holds now displays next to the text of the link:
Holds (#)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Cormack [Thu, 29 Sep 2016 20:31:11 +0000 (09:31 +1300)]
Bug 13029 : Follow up
Adding POD, changing the config files to live in a path pointed to by
koha-conf.xml
This means multiple instances can have their own config
Please test the 2 patches together
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Arbitrary arguments can be passed to SMS:Send
drivers. If an argument is provided that has already been set by
SMS::Send or the driver, it will be overwritten by the value from
the YAML file. My only suggestion for an improvement would be an
example of what the YAML should look like, but that is a minor thing.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Mon, 6 Oct 2014 13:04:12 +0000 (15:04 +0200)]
Bug 13029: Allow to pass additional parameters to SMS::Send drivers
C4::SMS::send_sms now reads a YAML file and pass all parameters in the
file to SMS::Send::new.
The config file is read in <installdir>/etc/sms/driver/<driver>.yaml.
For instance, if the driver used is SMS::Send::UK::Kapow, the config
file has to be in <installdir>/etc/sms/driver/UK/Kapow.yaml
A underscore character is prepended to all parameter names so they are
treated as driver-specific options (leading underscore must not appear
in config file).
Signed-off-by: Magnus Enger <magnus@libriotech.no> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Kirby [Mon, 28 Nov 2016 05:15:02 +0000 (00:15 -0500)]
Bug 17652: opac-account.pl does not include login branchcode
opac-account.pl does not include the login branchcode, whereas the other pages
available to users (opac-user, opac-memberentry, opac-passwd, opac-readingrecord,
opac-suggestions, opac-messaging, opac-shelves, etc.) on login DO provide
the login branchcode. Having the login branchcode available on opac-account.pl
would facilitate customization of the OPAC for individual branches.
To test:
1) Login to the OPAC and open /cgi-bin/koha/opac-account.pl
2) Inspect the body tag and observe the class attribute does not include
the login branchcode.
3) Apply the patch.
4) Repeat step 2.
5) Observe that the login branchcode is present.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 25 Nov 2016 12:22:42 +0000 (13:22 +0100)]
Bug 17681: Exiisting typos might thow some feees when recieved
Yes, we are fixing these four typos here.
Test plan:
[1] Read the changes.
[2] Run t/Auth_with_shibboleth.t
[3] Run git grep recieved| grep -v -e 'recievedlist' | grep -v -e 'serials-recieve.tt'
Note: serials-recieve.tt is just history. Bonus points for the one who makes
us get rid of that column recievedlist.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
EDIT:
Rebased. Change in Accounts has been corrected already.
Removed the po file.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17547: (MARC21|NORMARC) have Chronological term field $9 indexed
This patch makes Zebra index the 648$9 link for chronological terms on
bibliographic records. This way an authority search on chronological terms
will show the right number in 'Used in X records' message.
To test:
- Have a record with a 648 field, linked to an authority record (i.e. with an authid on 648$9).
- Search for the record, notice it is indexed.
- Perform an authority search for the chronological term
=> FAIL: the term is linked to our record, but koha shows '0' count.
- Apply the patch
- Run:
$ cd kohaclone
$ xsltproc etc/zebra/xsl/koha-indexdefs-to-zebra.xsl \
etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml \
> etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
$ git diff
=> SUCCESS: Notice the shipped etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
is up-to-date
- Run:
$ sudo cp etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
$ sudo koha-restart-zebra kohadev
$ sudo koha-rebuild-zebra -f -b -v kohadev
- Search for the record, notice it is indexed.
- Perform an authority search for the chronological term
=> SUCCESS: the term is linked to our record, usage count is 1
- Sign off :-D
I assume NORMARC is similar on this regard. Feel free to fail it if the NORMARC part of the
patch is wrong.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 12 Dec 2016 12:48:40 +0000 (13:48 +0100)]
Bug 17759: Remove invalid guarantorid's in Members.t
See also bug 17733. As long as we have no FK, these invalid guarantorid's
can make tests fail.
Adding a sql statement to clear them in the beginning of the test.
Test plan:
[1] Since it seems that AUTO_INC+8, +9 and +10 may fail one or two tests,
we should manipulate one or two borrowers:
Run this SQL query first:
SELECT `AUTO_INCREMENT` FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = '[your database]' and table_name='borrowers';
Now run: UPDATE borrowers SET guarantorid=[former value + 8] WHERE borrowernumber=[some existing borrowernumber]
[2] Without this patch, run Members.t. Should fail two tests.
[3] Apply the patch. Fetch the new AUTO_INCREMENT value and update
guarantorid accordingly again for the manipulated borrower.
[4] Run the test. It should not fail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 8 Dec 2016 19:41:33 +0000 (19:41 +0000)]
Bug 17749 - Missing l in '.pl' in link on waitingreserves.tt
Fixes a small typo introduced by Bug 17010
waitingreserves.p#[% tab %]
should be
waitingreserves.pl#[% tab %]
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 6 Dec 2016 16:09:21 +0000 (17:09 +0100)]
Bug 17733: Fix Members.t
In some dirty DB (Jenkins), the borrowers.guarantorid field is not set
to a valid patron id.
That make some tests fail if we create a patron with that patron id.
In my DB, auto increment for borrowers is set to 52 before the tests
On the 4th run of the tests, some tests fail.
Before I got a patron with a guarantorid=112 (I let you do the math).
Test plan:
The easiest is to trust me
Todo: Add a FK! Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Opened a new report for special case: Bug 17759.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On a kohadevbox:
Error flock (1) on
'/home/vagrant/kohaclone/installer/data/mysql/atomicupdate/bug_xxxx.perl':
No locks available at installer/data/mysql/updatedatabase.pl line 13637.
This is because Path::Tiny->slurp[_utf8] uses flocks which does not work
with NFS
Test plan:
Execute a .perl atomic update file on a kohadevbox
=> Without this patch you should get the flock error
=> With this patch the update should work fine
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 21 Nov 2016 13:26:13 +0000 (08:26 -0500)]
Bug 11274 Sent Notices Tab Not Working Correctly
This patch implements the notices toggle event using a different method.
Using on() lets us bind the event to a parent element, allowing the
event to attach to elements which may not exist on the page yet.
Test plan the same as original patch:
1) have a patron with more then 20 notices sent
2) go to patron profile -> notices
-> without patch, the showing/hidding of notices content does work
correctly only on first loaded page
-> with patch, it should work correctly everywhere - try to use
paginator, searching, ordering....
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Olivier Crouzet [Thu, 10 Nov 2016 16:25:09 +0000 (17:25 +0100)]
Bug 17470 Make overdue notices according to branch item only
When a patron had overdues on items from different branches
he received from each corresponding branch a notice claiming
the complete list of these items.
Signed-off-by: sbujam <sbujam@users.noreply.github.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Thu, 8 Dec 2016 09:13:35 +0000 (10:13 +0100)]
Bug 17744: Remove the oai_dc:dcCollection wrapper in OAI responses
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Members::GetHideLostItemsPreference can easily be
replaced with Koha::Patron->find(42)->category->hidelostitems
Test plan:
Create 2 patron categories, 1 with "Lost items in staff client" set to
"shown" and another one to "Hidden by default"
Create 2 patrons using them
On the result search page, the detail page of a record, the item list
page and the page to place a hold, make sure the lost items are
shown/hidden as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 31 Oct 2016 13:50:16 +0000 (13:50 +0000)]
Bug 17516 - Add CSV export option to item search after displaying output to screen
To test:
1 - Perform an item search
2 - Note you now have a link to output to csv
3 - Click that link
4 - Page should not change and you should recieve a csv
5 - Ensure nothing breaks
6 - Sign off
High five!
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 10 Oct 2016 09:52:51 +0000 (05:52 -0400)]
Bug 17416 - Move javascript in doc-head-close.inc into a separate include
In order to prepare to move staff client javascript assets into the
footer, this patch creates a new include file containing all <script>
content. This change should have no visible effect on how pages are
generated.
To test, apply the patch and view various pages in the staff client
(ciruclation, preferences, etc) to confirm that JavaScript is working
correctly.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 4 Nov 2016 10:39:12 +0000 (11:39 +0100)]
Bug 15896: [QA Follow-up] Add accountlines_id parameter in paycollect
We can solve the minor problem reported on 15906 now by using the
accountlines_id parameter of this report.
Test plan:
[1] Add two manual fines (say 20 and 30).
[2] Pay the second one in full, and check that the first one is not paid
first. So the 20 should remain and not the 30 with 20 outstanding.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 24 Feb 2016 12:36:20 +0000 (12:36 +0000)]
Bug 15896 - Use Koha::Account::pay internally for makepayment
This is the second patch in a series to unify all payment functions into
a single mathod
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
3) Test fine payment via the "Pay" button
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Followed test plan, works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 4 Nov 2016 08:46:08 +0000 (09:46 +0100)]
Bug 15906: [QA Follow-up] Correct a partial payment
The amount in accountlines should be saved as a negative amount, but
amount outstanding is correct.
Note: This routine is actually used only once (in paycollect.pl). And is
only cosmetically tested in Accounts.t.
Test plan:
[1] Create a manual invoice, Fine, say 20.
[2] Click on the Pay button next to this fine, and pay 1.
[3] Pay again, using 'Pay amount' button, and pay 2.
[4] Pay again, using 'Pay' on the same line, the full remaining amount.
[5] Verify that you see -1, -2 and -17 on the Accounts tab.
[6] Run t/db_dependent/Accounts.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 24 Feb 2016 15:51:07 +0000 (15:51 +0000)]
Bug 15906 - Remove use of makepayment in paycollect.pl
Test plan:
1) Apply this patch
2) Make a payment in full using the "Pay" button
3) Note payment succeeds
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17722: Make PatronLists.t run inside a transaction
This patch makes t/db_dependent/PatronLists.t run inside a transaction.
It also makes it generate its own data using t::lib::TestBuilder instead
of relying on sample patrons on the DB.
To test:
- Run:
$ prove t/db_dependent/PatronLists.t
=> SUCCESS: Tests pass
- Apply the patch
- Run:
$ prove t/db_dependent/PatronLists.t
=> SUCCESS: Tests pass
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Nov 2016 09:13:27 +0000 (09:13 +0000)]
Bug 14541: Do not truncate tax rate values
Tax rates are stored in decimal(6,4) fields which means that 4 decimals
are allowed.
If a tax rate is 8.42%, it is stored as 0.0842
If a tax rate has more precision than that, Koha won't deal correctly
with it. We will need to update the DB structure.
With this patch, the tax rate will be displayed with the same precision
as in the DB. So if you enter 8.42, you will see 8.42% instead of 8.4%
without this patch.
Test plan:
Do a full acquisition workflow with a tax rate like 8.42% and confirm
that it is correctly displayed.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 22 Nov 2016 15:28:04 +0000 (15:28 +0000)]
Bug 17668: Fix typo in parcel.pl - listinct vs listincgst
This typo has been introduced by
commit eed14b080db8691f371b4c19f1a190b87fcc396a
Bug 13001: Refactor VAT and price calculation - parcel page
So before the tax rewrite (13321, 13323).
It sounded weird to me that testers did not catch the bug on this page.
To understand the logic:
Conditions are listincgst, invoiceincgst
Conditions | Before this patch | If we fix the typo | After this patch
0 0 | excluded | excluded | excluded
0 1 | included | included | included
1 0 | excluded | excluded | excluded
1 1 | included | included | included
Test plan:
Create 4 vendors with the difference combinations
Create a basket, add an order (with a tax) and receive it
Confirm that the different values displayed on the parcel page are correct
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 23 Nov 2016 10:06:04 +0000 (10:06 +0000)]
Bug 15822: Fix 500 error when searching if items.onloan=0000-00-00
The calls
output_pref({ dt => dt_from_string( $date ) })
are wrong and should be replaced with
output_pref({ str => $date })
For better error handling.
Here we fix the problem of items.onloan when searching
Test plan:
- Set items.onloan=0000-00-00 (UPDATE items SET onloan='0000-00-00')
This can come from old data or bad migration
- Execute a search
=> Without this patch you get
Can't locate object method "ymd" via package "dateonly" (perhaps you forgot to load "dateonly"?) at /home/vagrant/kohaclone/Koha/DateUtils.pm line 225.
=> With this patch you won't get the error
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Mon, 23 May 2016 01:57:04 +0000 (11:57 +1000)]
Bug 16376 - Koha::Calendar->is_holiday date truncation creates fatal errors for TZ America/Santiago
Using a DateTime object with a timezone of America/Santiago
was causing fatal errors for Koha::Calendar->is_holiday
and Koha::Calendar->exception_holidays, when the objects
were truncated to an invalid local time.
Using a floating zone allows us to use the same day, month, year
for comparison purposes without running into the possibility of
creating an invalid local time and thus a fatal software error.
Edit:
While the changes to is_holiday and single_holiday make sense (Jonathan agrees too)
I didn't manage to have them fail, because truncate is not failing in my trials, but
days_between. So to me, it narrows down to have exception_holiday return floating tz
datetime objects so it doesn't break days_between.
Anyway, it is ok to push this patch, and the regression test I provide covers this scenario
I'm describing.
To test:
- Apply the regression tests patch
- Run:
$ prove t/db_dependent/Holidays.t
=> FAIL: Unexpected error due to bad timezone/date combination
- Apply this patch
- Run:
$ prove t/db_dependent/Holidays.t
=> SUCCESS: Tests pass
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a regression test for exception_holidays. This routine
returns a list of datetimes to be used in date comparison and some datetimes don't exist
in some timezones, so floating timezones should be used instead.
To test:
- Apply the patch on master
- Run:
$ prove t/db_dependent/Holidays.t
=> FAIL: The new test fails
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17716: (followup) Remove dep on existing data and tidy
This patch removes the requirement for this tests for the DB to include
at least 10 borrowers to pass. Borrowers are now created on each run
using t::lib::TestBuilder and a loop.
Bonus: some tiny changes to tidy the file.
To test:
- Run:
$ prove t/db_dependent/CourseReserves.t
SUCCESS => Tests pass with and without the patch.
- Sign off :-D
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/CourseReserves.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/CourseReserves.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/CourseReserves.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Holds/RevertWaitingStatus.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Holds/RevertWaitingStatus.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Holds/RevertWaitingStatus.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Members/* create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Members/*
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Members/*
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 2 Dec 2016 15:10:51 +0000 (15:10 +0000)]
Bug 17713: Fix Members.t tests
If the category_type is 'S', GetBorrowersToExpunge won't return the
patron.
Test plan:
t/db_dependent/Members.t
should always return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 5 Dec 2016 08:17:21 +0000 (08:17 +0000)]
Bug 17720: CSRF - Handle unicode characters
From the pod of Digest::MD5:
"""
Since the MD5 algorithm is only defined for strings of bytes, it can not
be used on strings that contains chars with ordinal number above 255
(Unicode strings). The MD5 functions and methods will croak if you try
to feed them such input data.
What you can do is calculate the MD5 checksum of the UTF-8
representation of such strings.
"""
Test plan:
- Set a MySQL/MariaDB password with unicode characters:
UPDATE user SET password=PASSWORD('❤') WHERE USER='koha_kohadev';
FLUSH PRIVILEGES
- Update your $KOHA_CONF file
- Restart Memcached
- Hit the files modified by this patch
=> Without this patch, you will get a software error (with "Wide
character in subroutine entry" in the logs).
=> With this patch, everything will go fine
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: removed debugging leftover
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 8 Nov 2016 12:16:49 +0000 (12:16 +0000)]
Bug 17580: Add the Koha::Patron->get_overdues method
This method will be used by several patches later.
Test plan:
prove t/db_dependent/Koha/Patrons.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 2 Dec 2016 10:25:29 +0000 (11:25 +0100)]
Bug 17583: [QA Follow-up] Final polishing
Number of tests in Patrons.t corrected.
Method is_going_to_expired (no english!) renamed to is_going_to_expire.
Adding a negative duration replaced by a subtract. Reads easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 11:16:03 +0000 (11:16 +0000)]
Bug 17583: Mock the pref before tests
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Nov 2016 13:24:09 +0000 (13:24 +0000)]
Bug 17583: Make sure we are comparing 2 dates
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Nov 2016 11:25:16 +0000 (11:25 +0000)]
Bug 17583: Fix tests
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Wed, 9 Nov 2016 09:59:50 +0000 (09:59 +0000)]
Bug 17583: Add test for is_going_to _expired to be true
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 8 Nov 2016 15:01:55 +0000 (15:01 +0000)]
Bug 17583: Add the Koha::Patron->is_going_to_expired method
In order to be consistent, we need to create this method as well.
Test plan:
Make sure the pref NotifyBorrowerDeparture works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 8 Nov 2016 11:26:00 +0000 (12:26 +0100)]
Bug 17583: Use Koha::Patron->is_expired from the circulation page
Bug 17579 introduces a Koha::Patron->is_expired method.
Let's use it from this script.
Test plan:
Confirm that you see the message on the interface from the circulation
page for an expired patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17671: Remove unused variables in C4::Reserves
I was reading through Reserves.pm trying to figure out a bug - found some
unused variables instead.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
phette23 [Tue, 29 Nov 2016 20:16:23 +0000 (12:16 -0800)]
Bug 17696: Add 2 missing periods in opac-suggestions.tt
Problem:
- two missing trailing periods in template
Test plan:
- configure MaxOpenSuggestions with a low limit (e.g. 1)
- visit opac-suggestions.pl?op=add, login if necessary
- note that the period is missing from the second sentence of the leading paragraph under the "Enter a new purchase suggestion" heading
- continue to submit suggestions until you've reached the MaxOpenSuggestions limit
- observe the missing period in the "TooManySuggestionsText" paragraph
- apply patch
- revisit opac-suggestions.pl?op=add
- note that the period is now present in the second sentence of the leading paragraph under the "Enter a new purchase suggestion" heading
- note that the period is also present at the end of the "TooManySuggestionsText" paragraph
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 1 Dec 2016 20:11:41 +0000 (20:11 +0000)]
Bug 17709 - Article request broken - 'internal server error'
Article requsts from OPAC and from intranet are showing an 'internal
server error'. I am testing in 16.11 with Plack.
Test Plan:
1) Set circ rule to record only article requests
2) Attempt to place a request on a record with no items
3) Note the error
4) Apply this patch
5) You should now be able to place the request!
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 23 Nov 2016 01:25:23 +0000 (01:25 +0000)]
Bug 17670: Grammar mistakes - effect vs affect
In two places:
1. Administration -> Preferences -> Circulation ->
AllowMultipleIssuesOnABiblio: says effect, should say affect
2. Reports -> Lost Items -> Help (top-right corner): says effect, should
say affect
To test, navigate to these two places and confirm charges have been made
and are correct.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Tue, 4 Oct 2016 10:52:46 +0000 (12:52 +0200)]
Bug 17395 - exporting checkouts in CVS generates a file with wrong extension
In checkouts table, the is an export form (when some exports syspref are enabled).
Export using a CSV profile will create a file with name koha.mrc (same as ISO2709 export).
It would be better with koha.csv.
Bug 14647 manages the export page, this but will only manage for export from checkouts table where file name is hard-coded.
Test plan :
- Enable checkouts exports by setting syspref ExportWithCsvProfile with a profile for record export
- Go to circ page of a patron with checkouts : /cgi-bin/koha/circ/circulation.pl?borrowernumber=xxx
- Show checkouts table
- Select some checkboxes in "Export" column
- Select "CSV" in export format combo-box
- Click on "Export"
=> Without patch, the generated file is koha.mrc
=> With patch, the generated file is koha.csv
- Check ISO2709 export generates a file named koha.mrc
Signed-off-by: Dani Elder <dani@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 19 Aug 2016 11:01:32 +0000 (12:01 +0100)]
Bug 16873: Improve renewal error messages on self check
When a patron is not allowed to renew from the self check module, the
only message displayed is "No renewals allowed".
It would be nicer to let him/her know that the renewal is not allowed
because it's a on-site checkout or automatic renewal.
To do so we can call CanBookBeRenewed instead of CanBookBeIssued and get
the renewal error.
Test plan:
0/ Switch off AllowSelfCheckReturns
1/ check out an item and tick "auto renewal"
2/ Go on the self check module
=> auto renewal message is displayed
3/ check out an item and tick "on-site checkout"
4/ Go on the self check module
=> on-site checkout message is displayed
5/ check out an item without ticking any checkboxes (regular checkout)
Renew it to reach the max renew allowed
6/ Go on the self check module
=> regular checkout message is displayed
7/ Switch on AllowSelfCheckReturns and repeat previous steps
=> "Return this item" button is displayed in addition of the renewal
error message
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Thu, 13 Oct 2016 09:05:00 +0000 (11:05 +0200)]
Bug 14699: Reword "Select all/Clear all" and change their behaviour
"Select all" -> "Select all visible rows"
"Clear all" -> "Clear selection on visible rows"
+ fix the bug where the Delete link was visually enabled only if you
checked a box in the first page (now every checkbox enable the link)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Tue, 8 Sep 2015 06:49:44 +0000 (08:49 +0200)]
Bug 14699: Show number of selected searches in search history
With the number displayed, it should remove the ambiguity about what
"Select all" and "Clear all" do.
The number is repeated in the "Delete" confirmation dialog.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Thu, 20 Aug 2015 13:38:59 +0000 (15:38 +0200)]
Bug 14699: Fix intranet search history issues due to pagination
DataTables removes hidden rows from the DOM. Because of that, "Select
all", "Clear all" and the form submission don't work correctly
(basically they act only on the currently displayed page).
This patch fixes just that.
Test plan:
1/ Go to your search history page
2/ Make you sure you have at least 21 entries in your search history. If
not, do some searches and come back here.
3/ Click "Select all" and change page. The checkboxes on the new page
should be checked.
4/ Check some checkboxes on this new page and click "Clear all". Go back
to the previous page, checkboxes shouldn't be checked.
5/ Check some checkboxes on at least 2 different pages and click
"Delete". All selected search history entries should be deleted.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 24 Nov 2016 13:37:52 +0000 (13:37 +0000)]
Bug 17676: Update default COLLATE of marc_subfield_structure
(This issue has been raised on bug 17216 comments 93-103)
On bug 11944 (3.19.00.006) we updated the default COLLATE for all our tables to
utf8_unicode_ci but not the marc_subfield_structure table.
Indeed we want to keep tagsubfield a utf8_bin (to allow lowercase and uppercase
of the same letter for subfields).
We should have set the default collate to utf8_unicode_ci for further changes.
This patch updates the DB entry 3.19.00.006 to set the default COLLATE to this
table (for people upgrading from prior to 3.19.00.006) and set this
default COLLATE on 16.06.00.033 (for people upgrading from after 3.19.00.006).
The error is:
DBD::mysql::db do failed: Can't create table `koha_kohadev`.`#sql-306_9f9` (errno: 150 "Foreign key constraint is incorrectly formed") [for Statement "
ALTER TABLE marc_subfield_structure
MODIFY COLUMN authorised_value VARCHAR(32) DEFAULT NULL,
ADD CONSTRAINT marc_subfield_structure_ibfk_1 FOREIGN KEY (authorised_value) REFERENCES authorised_value_categories (category_name) ON UPDATE CASCADE ON DELETE SET NULL;
"] at installer/data/mysql/updatedatabase.pl line 13175.
Upgrade to 16.06.00.033 done (Bug 17216 - Add a new table to store authorized value categories)
Test plan:
1/ git checkout v3.18.00
2/ Do an install
3/ git checkout master;
4/ perl installer/data/mysql/updatedatabase.pl
=> Without this patch, you get the error
=> With this patch applied you will not get it and the default COLLATE for
marc_subfield_structure will be correctly set. Make sure tagsubfield is
still utf8_bin
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Will put some notes on the Bugzilla report.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 21 Nov 2016 11:47:00 +0000 (11:47 +0000)]
Bug 17344 - Can't set guarantor in quick add brief form
This patch updates the guarantor form to work with the quick add form
To test:
1 - Quick add a 'Kid' patron (or other patron type that may have
guarantor)
2 - Verify form appears as expected
3 - Test that you can add a patron manually or using selector
4 - Test that deletion works as expected
5 - Test 3 and 4 from the full version of the form
6 - Save or cancel and add a new patron using the full form only
7 - Verify that adding/deleting guarantor works with no errors
8 - Sign off
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 13 Oct 2016 08:49:17 +0000 (10:49 +0200)]
Bug 8835: New db rev for issn_idx
This db rev reapplies dbrev 3.15.00.049 in case that one failed due to
existence of issn_idx.
Test plan:
If you do not have index issn_idx, recreate it:
ALTER TABLE biblioitems ADD INDEX issn_idx (issn (255))
Run this db rev. You should see: Removed issn_idx.
Rerun the dbrev. You should see: Everything is fine.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Marcel de Rooy [Wed, 12 Oct 2016 13:29:01 +0000 (15:29 +0200)]
Bug 8835: Drop issn_idx for completeness
When dbrev 3.15.00.049 failed, the still existing issn_idx must have
been the cause.
This patch only adjusts the old db rev.
Still thinking if we also need a new db rev to fix isbn and issn for
those installs where 3.15.00.049 failed too. (In that case the fields
may not have been changed to mediumtext and no indexes were added.)
Test plan:
Ideally, run an upgrade from something older than 3.15.00.49.
But running the added sql command from the command line might convince
you too.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Jonathan Druart [Mon, 3 Oct 2016 11:27:21 +0000 (12:27 +0100)]
Bug 17278: Fix "show all items" link
Then we need to remove the "available" part from the query.
They are really awkward patches...
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 3 Oct 2016 09:45:13 +0000 (10:45 +0100)]
Bug 17278: Use available limit when requesting zebra when ccl query is used
When a ccl query is used, the buildQuery subroutine does not handle
the available limit (not an index).
This available limit is handle later in the subroutine.
This affect the author links on the detail page for instance (an=xx).
A much better solution would be to keep an 'available' zebra index up-to-date.
Test plan:
(OPAC or staff interface, it does not matter)
- Launch a search, click on a result and then on an author link to
launch another query (an:xx)
- Limit to available items without the 'facet'
=> Without this patch you won't get any results
=> With this patch applied you should get relevant result (regarding the
known bugs 16970, 13715, 13658, 5463, etc.)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Wed, 16 Nov 2016 16:05:09 +0000 (10:05 -0600)]
Bug 17609: Small typo in about.tt
Small typo whould => should
To avoid any misunderstanding you should not export the memcached config
from ENV in line 79
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
An error occurred when updateing mappings => updateing
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 09:01:19 +0000 (09:01 +0000)]
Bug 17391: Fix number of values in sysprefs.sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 08:58:55 +0000 (08:58 +0000)]
Bug 17391: Add atomic update file
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sun, 16 Oct 2016 12:20:42 +0000 (14:20 +0200)]
Bug 17391: Add missing prefs to sysprefs.sql
Adds
- ReturnpathDefault
- ReplytoDefault
to the sysprefs.sql file.
To test:
- Run the web installer in any language
- Check all preferences are installed without error
- Check prefs listed above now exsit in your
systempreferences table
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Mon, 14 Nov 2016 21:20:22 +0000 (15:20 -0600)]
Bug 17616: (follow-up)Select tag on elasticsearch mappings page is not closed properly
Also some close tag </selected> should be </select>
Follow previous patch to test
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Fri, 11 Nov 2016 16:48:15 +0000 (16:48 +0000)]
Bug 17616: Select tag on elasticsearch mappings page is not closed properly
Test plan
1) Have SearchEngine syspref set to Elastic
2) Look at source on admin/searchengine/elasticsearch/mappings.pl
-> without patch you'll see select with attribute
data-id="mapping_search_field_name" closing tag written badly as
"/select>"
-> with patch everything looks OK
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Tue, 9 Aug 2016 11:42:15 +0000 (14:42 +0300)]
Bug 17086: Reword borrowers to patrons in Swagger tags for holds
Routes for holds have tags called "borrowers". We should use "patrons" instead
in order not to have both (endpoints for patrons already add "patrons").
This patch changes the tags from borrowers to patrons in:
GET /holds
POST /holds
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 08:55:04 +0000 (08:55 +0000)]
Bug 17626: Remove existing install instructions and link to the wiki pages instead
Since we are pretty bad to maintain INSTALL files, I'd suggest to point
to the wiki.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 08:54:45 +0000 (08:54 +0000)]
Bug 17626: Remove INSTALL.distri files
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 15 Aug 2016 18:12:44 +0000 (18:12 +0000)]
Bug 17132 - Availability search broken when using Elastic
Elastic appears to be indexing onloan as a string, but our code assumes
it is a boolean.
Test Plan:
1) Ensure you are set up using Elastic as your search engine
2) Search only for available items from the advanced search
3) Note you get no results
4) Apply this patch
5) Re-run the search
6) You should now get results!
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Sun, 20 Nov 2016 15:35:53 +0000 (16:35 +0100)]
Bug 17663: Forgotten userpermissions from bug 14686
Bug 14686 added in a dbrev:
(13, 'upload_general_files', 'Upload any file'),
(13, 'upload_manage', 'Manage uploaded files');
But these were not added in userpermissions.sql somehow :)
So, what now?
This patch:
[1] adds them to userpermissions.sql as should have been done,
[2] adds a dbrev to add them for newer installs that did not run the
14686 dbrev.
Test plan:
[1] Run this sql statement:
DELETE FROM permissions WHERE code = 'upload_general_files' OR
code = 'upload_manage'
[2] Run the db rev.
[3] Check if you see Tools/Upload (with sufficient perms).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 18 Nov 2016 15:26:17 +0000 (15:26 +0000)]
Bug 17660: #adv is considered as an ad by adblock
So let's rename it!
Test plan:
Edit a $t in any framework, you should be able to unfold the "Advanced
constraints" part
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Mon, 10 Oct 2016 14:06:07 +0000 (17:06 +0300)]
Bug 17419: Fix smsalertnumber and mobile confusion in moremember.pl
members/moremember.pl will set mobile number as smsalertnumber in template if
smsalertnumber is not defined. This will cause incorrect display for SMS number
in patron's Details-tab. This confusion between smsalertnumber and mobile is
already fixed in Bug 14683, but members/moremember.pl was not fixed yet.
This is a minor issue since it won't occur for manually added new patrons due to
fixes already pushed in Bug 14683, but in case patron's smsalertnumber is null
in database, this bug can be replicated:
To test:
1. Set EnhancedMessagingPreferences to "Allow" and make sure SMSSendDriver
has been set.
2. Add a new patron, give it a mobile/other phone number.
3. Run a SQL query:
update koha.borrowers set smsalertnumber=NULL where borrowernumber=XXX;
(replace XXX with your new patron's borrowernumber)
4. Go to patron's details tab and observe that SMS number shows the mobile/
other phone you provided earlier.
5. Apply patch.
6. Refresh patron's details tab.
7. Observe that smsalertnumber is now empty, as it should be.
Followed test plan, works as expected. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Mon, 7 Nov 2016 22:03:33 +0000 (23:03 +0100)]
Bug 17543: Update German web installer sample files for 16.11
Updates sample files with German translations:
- Sample notices for article requests
To test:
- Make sure the German web installer installs all
sample files correctly.
- Bonus: check German translations.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested german installer/translation
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch:
- Authorised value HSBND_FREQ
is done by bug 17576 (and correctly translated in German)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log