Nick Clemens [Fri, 27 May 2016 20:51:56 +0000 (16:51 -0400)]
Bug 11606: Add Novelist client to staff
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options
Sponsored by:
Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)
Chris Cormack [Mon, 4 Jul 2016 21:12:24 +0000 (09:12 +1200)]
Bug 7143 : More new devs
confirmed dates against emails and downloads.koha-community.org
Two names added correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Cormack [Mon, 20 Jun 2016 20:39:34 +0000 (08:39 +1200)]
Bug 7143 : Adding new developers
Claire Gravely seemed to be a cut and paste error.
June 3 better matches git log.
Three other names in history are in about as well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Jun 2016 06:36:48 +0000 (08:36 +0200)]
Bug 7143: [QA Follow-up] Adjusting developer information
For consistency we should not only add firstnames to the list of
developers in about.tt and history.txt.
Adding some surnames with the help of git log and Bugzilla. Also
corrected a closing li tag.
Note that I did not find one surname: Natasha of Catalyst Academy.
Probably Chris could add that missing piece.
NOTE: Natasha piece still needs clean up.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 18 Jul 2016 11:02:14 +0000 (11:02 +0000)]
Bug 16934 - Cannot add notes to canceled and deleted order line
Some librarians would like to be able to add notes to deleted order
lines to keep track of data such as what title the order line was for.
For some reason ModOrder dies if a biblionumber is passed in, even
though it does not use biblionumber and does not need it to exist in any
fashion! This limitation should be removed.
Test Plan:
1) Create a basket with an orderline
2) Cancel the order / delete the record
3) Click the "Add internal note" link for that order line
4) Fill in a note and click "Save"
5) Note the error
6) Apply this patch
7) Repeat steps 3-4
8) Note this time the note is saved!
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 07:14:27 +0000 (08:14 +0100)]
Bug 16958: Fix XSS in opac-imageviewer.pl
Test plan:
Trigger
/opac-imageviewer.pl?biblionumber=14&imagenumber=7"><sCrIpT>alert(42)<%2fsCrIpT>
=> Without this patch you will see the JS alert
=> With this patch applied you won't see it
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc [Thu, 21 Jul 2016 08:22:57 +0000 (10:22 +0200)]
Bug 16947: Can not modify patron messaging preferences
To verify:
- Set syspref 'EnhancedMessagingPreferences' to 'Allow'
- In staff client, go to a patron's detail page
- Edit Patron messaging preferences (using link below table)
- Save
Result: Form does not save, stays open
JavaScript error in intranet-tmpl/prog/js/members.js line 107
TypeError: document.form.password is undefined
To test:
- Apply patch
- Repeat steps above
- Verify that messaging preferences save as expected
- Verify that other patron modifications work as before
NOTE: remember to force reload of the javascripts.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Mon, 13 Jun 2016 03:35:56 +0000 (15:35 +1200)]
Bug 16716: Replaced wrong GROUP BY with DISTINCT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15974: Rancor: Correctly select existing authorized value
Test plan:
1) Open up a record in Rancor with an itemtype besides the first in
the list ('BK' in the sample itemtypes).
2) It will show "Book" instead of the correct itemtype.
3) Apply patch, reload the page.
4) The correct itemtype should now show.
NOTE: The scope is only 942$c. This corrects that.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Thu, 14 Jul 2016 13:50:22 +0000 (15:50 +0200)]
Bug 16941: Can not add new patron in staff client
To reproduce:
- Go to staff client Home > Patron
- New patron
- Choose a category and fill form, submit
Result: Form reloads, patron data are not saved.
To test:
- Apply patch
- Repeat steps above
- Verify that patron data are saved and the new patron's
detail page displays
- Try to enter a duplicate patron (e.g. same surname, firstname
and birthday as above)
- Verify that a duplicate message appears
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine has been added by
commit 5904681faca77c87ff8071414d66e123a2d3baa9
Date: Wed Mar 19 10:11:12 2008 -0500
CleanBorrowers fixing.
but has never been used.
It can be removed safely.
Test plan:
git grep GetBorrowersNamesAndLatestIssue
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.
Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:37:46 +0000 (14:37 +0100)]
Bug 16889: Remove C4::Items::biblioitems_columns and use Koha::Biblioitems->columns instead
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the biblioitems table are correctly displayed in the 'Conditions'
dropdown list.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:35:02 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Items::columns and use Koha::Items->columns instead
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the items table are correctly displayed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:35:08 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Members::columns and use Koha::Patrons->columns instead
Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:32:40 +0000 (14:32 +0100)]
Bug 16889: Add Koha::Objects->columns
Currently we have 3 subroutines to retrieve the columns of tables:
C4::Members::columns, C4::Items::columns and
C4::Items::biblioitems_columns.
It is easier to have a Koha::Objects->columns method to provide the
different classes to retrieve their related column names.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16876: Remove Full Heading column from OPAC Auth search results
To test:
1) Go to Authority Search and do a search
2) Notice that there is a Full Heading column that has 'View full
heading' links. These take up a lot of space and don't mean a lot to
the user
3) Apply patch and refresh
4) Notice that the the Full Heading column is gone and there is now a
Details column next to the authorities. Confirm the link takes you to
the expected authority detail page.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 13:00:58 +0000 (14:00 +0100)]
Bug 16853: Move changepassword to Koha::Patron->update_password
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 10:29:16 +0000 (11:29 +0100)]
Bug 16849: Move IsDebarred to Koha::Patron->is_debarred
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 14 Jul 2016 15:45:54 +0000 (11:45 -0400)]
Bug 16681 - Allow update of opacnote via batch patron modification tool
To test:
1 - Select a batch of patrons (via list, saved file, and cardnumber
entry)
2 - Verify you cannot edit 'opacnotes' field, nor can you see
'borrowernotes' field in table, though you can edit it
3 - Verify editing works as expected
4 - Apply patch
5 - Select a batch via each method as above
6 - Note both note columns display in table
7 - Note that you can edit or clear the opacnotes field as expected
8 - Verify other feautres work as previously
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2016 15:18:14 +0000 (11:18 -0400)]
Bug 16538: Improve the style of progress bars
This patch updates the style of progress bars to make them a little
nicer. Progress bars in the staff client are not built in a consisten
way. Some have been updated to use the <progress> element and some have
not. This patch improves some styling common to both kinds.
Other changes:
- Redundant in-page CSS has been removed from many pages.
- An invalid "min" attribute has been removed from several instances of
<progress>.
- Corrected capitalization.
- Fixed incorrectly quoted attributes.
- Added missing form "action" attributes.
To test, clear your browser cache if necessary. Apply the patch and
test uploads on the following pages:
- Circulation -> Offline circulation file upload
- Tools -> Batch item modification
- Tools -> Batch record modification
- Tools -> Stage MARC records for import
- Tools -> Manage staged MARC records
- Tools -> Upload local cover image
- Tools -> Upload
In all cases, progress bars should look improved and work correctly.
Test Tools -> Batch item deletion. Unused background job handling markup
has been removed. Deletion processing should work correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Tue, 17 May 2016 04:46:31 +0000 (04:46 +0000)]
Bug 16531: Circ overdue report is showing an empty table if no overdues
EDIT: Comment 2
EDIT2: using noreport variable (Comment 5)
To test:
1) Ensure you have no items overdue
2) Go to Circ -> Circulation reports -> Overdues
3) Notice empty table, '0 items overdue' heading
4) Ensure syspref FilterBeforeOverdueReport is set to 'Don't require'
5) Apply patch and refresh page
6) Notice empty table is no longer showing and page says "There are no
overdues"
7) Apply a filter to search
8) Page now says "There are no overdues matching your search" with a
link to reset filter.
9) Click Reset filter -> confirm any filters you applied are cleared.
10) Set FilterBeforeOverdueReport to 'Require' and refresh overdue
report
11) Page should say "Please choose one or more filters to proceed"
12) Check out an item to a member, ensure due date is a date that has
passed (i.e. yesterday)
13) Refresh overdue report page
14) Page should still say "Please choose one or more filters to proceed"
15) Set FilterBeforeOverdueReport to 'Don't require'
16) Confirm table now shows correctly with '1 items overdue' heading
etc.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 3 Jun 2016 18:49:25 +0000 (14:49 -0400)]
Bug 15853 - Add author and link columns to opac course reserves table
To test:
1 - Add some course reserves
2 - View the table in staff and opac, there is no column for author or
link
3 - Apply patch
4 - You shoudl see these columns
5 - Link should contain item uri if present, fallback to title 856$u,
then be blank if niether
Sponsored by:
Southeastern Wisconsin Information Technology Exchange, Inc (SWITCH)
(http://caspian.switchinc.org/)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Might be good to add this table to the column visibility tool if you
plan to add more columns.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add Font Awesome Icons to:
- "Select/Clear all" links to pay.tt (Pay fines tab)
- "Filter icon" in "filter paid transactions" to Accout tab (boraccount.tt)
- "Trash icon" to Remove option in "Manual restrictions"
(borrower_debarments.inc) also add "Ban and plus icon" to "Add manual restriction"
To test:
-Apply patch
-Select a patron who has fines
-Go to "Fines->Pay fines" tabs and see the icons in "Select/Clear all"
-Choose the "Account" tab and sse the icon in "Filter paid transactions"
-Select the "Check out" tab and go to "Restrictions"
-Add a manual restriction and notice about the two new icons fa-plus and fa-band
-See the new button btn-mini and the fa-trash icon
-Verify that all works as expected
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Fri, 24 Jun 2016 21:55:40 +0000 (15:55 -0600)]
Bug 16812: Revise JS script for z3950_search.tts and remove onclick events
Modify JS script to all templates for z3950_search.tt and reduce the
redundant code
This patch propose:
-z3950_auth_search.tt has various onclick events used in links.
Also fix: acqui/z3950_search.tt and cataloguing/z3950_search.tt
-Trigger onclick events via JQuery .on()
-Make a separate .js and .inc file
-Reduce the number of line and redundant code
-Also add Font Awesome Icons to "Select/Clear all" and "Clear search
form" links
To test:
1-Apply bug 16600 on top
2-Apply patch
3-Go to Authorities > click New from Z39.50
4-Fill some fields and click in "Clear search form" link
5-Search under "Dalton" or another author that launch too many headings
6-Clic in some heading and notice the dialog open, test: "Preview MARC",
ISBD (when showed), "Import" and close the dialog "X". Use the
"Import" from table too.
7-Use the "next/previous page" button, change "Go to page" to number in and
out of the range presented, also test whit a letter, etc.
Go to Cataloging > New from Z39.50/SRU
Repeat steps 3 to 6. But this time with bib records.
Go to Adquisition > Open or Create a basket and choose to "Add to basket"
button. A modal appear, chose the option "Order from external source"
Repeat steps 3 to 6. But this thime with bib records.
NOTE: The icon trash for "Clear search form" has been selected according
with module "Advanced search" there is an icon trash with link "Clear
fields" that has the same fuctionality.
For some reason the image loading-small.gif does not charge all times
when the code is get out of the template. (Fixed with this new patch)
DataTable it is specific for each template
Sponsored-by: Universidad de El Salvador Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 20 Jun 2016 12:57:25 +0000 (14:57 +0200)]
Bug 16777: Correct intranet search alias
A long-standing typo in our apache config files:
[intranet]/search refers to search.pl (which does not exist)
This patch refers it to catalogue/search.pl
Test plan:
Run an install or copy the change from apache-shared-intranet.conf or
koha-httpd.conf to your apache config. Restart Apache and check
if http://[your staff client]/search works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested by making manual changes according to the patch. Did not test a
new installation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add missing quote in line 152
Modify title of the page and breadcrumbs section wrong "searchfield" used
should be instead "currency.currency"
To test
-Try to delete the active and used currency, for example, my case
USD, look that appear USD' with the initial single quote missing in
message Confirm deletion of currency USD'
-Notice about the breadcrumbs section appear:
Confirm deletion of currency ''
Should appear the currency
-Try to delete another currency see the pharese look the same
-Notice about the title in both cases, there is missing the currency name
-Apply follow-up and re-test
Sing-off on followup Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 21 Jun 2016 07:08:06 +0000 (09:08 +0200)]
Bug 16701: Translatability: Fix problem with isolated ' in currency.tt
This patch moves markup <span class="ex"> into template variables to
avoid sentence splitting.
To test:
- Apply patch
- Verify that currency administration works as before
(Home > Administration > Currencies & Exchange rates > Currencies)
- Examine code changes
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Fri, 10 Jun 2016 08:25:54 +0000 (10:25 +0200)]
Bug 16621: Translatability: Issues in opac-user.tt (sentence splitting)
This patch fixes issues due to sentence splitting in
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
Note: This is a string patch. It does not add or change functionallity.
To test:
- Examine code and verify that the text changes remove sentence splitting
and that the changes make sense.
- Log in to OPAC and verify that messages look correct
- with blocked /debarred user (with and without comment and date)
- with user who has to much fines (needs syspref OpacRenewalAllowed
and syspref OPACFineNoRenewals)
- with user who has his card marked as lost
- with user with an account that is about to expire
- with user with expired account
- with user with uncertain address information (with and without
syspref OPACPatronDetails set to Allow)
Note: Amended to make patch apply 2016-07-10 mv Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 11 Jul 2016 19:03:37 +0000 (15:03 -0400)]
Bug 16900 - Hold suspend button incorrectly styled in patron holds list
This patch updates the style of the suspend/resume button in the list of
holds displayed on the checkout page and on the patron detail page. The
button is now a Bootstrap-styled button with a Font Awesome icon.
To test, apply the patch and locate a patron who has holds.
- On the checkout page, view the 'Holds' tab and confirm that there is a
correctly-styled 'Suspend' button for each hold.
- Verify that the button works correctly and looks correct when a hold
has been suspended.
Signed-off-by: Arslan Farooq <arslanone@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11325 add solved a focus on "Add item" missing in Lists page.
Since revamping of this page, the add item form exists both in page.
The one corrected by Bug 11325 is not visible because it checks a bad
var allowaddingitem instead of can_add_biblios.
This patch removes the first form and corrects the second form.
It moves the form at left part of page so that it is always shown
(usefull when there are a lot of items). It does not add the list name
after "Add item" besause it whould be huggly for long names and because
listname already exists in breadscrumbs and on top of the table.
It also adds autocomplete="off" on barcode input because there can be
problems with a scanning device.
Test instructions:
1. Create a list
2. Make sure you have an object with an assigned barcode
3. Go to the list
=> The barcode entry interface should be at left and has the focus
4. Enter the barcode and press enter (or use a scanner)
=> The item is added to the list
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice improvement, thanks!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 11 Jul 2016 12:51:12 +0000 (08:51 -0400)]
Bug 16893: Missing closing tag disrupts patron detail page style
A missing closing </i> causes the the patron detail page to be in all
italics if the patron has a restriction message. This patch corrects it.
To test, apply the patch and locate a patron who has a restriction
message. The restriction message should be in italics but the rest of
the page should display normally.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rest of the page displayed normally
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 11:25:16 +0000 (12:25 +0100)]
Bug 16844: (follow-up of 15656) Remove export of GetMemberRelatives from C4::Members
Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.
Test plan:
git grep GetMemberRelatives
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 5 Jul 2016 17:23:59 +0000 (19:23 +0200)]
Bug 14138: Patroncard: Warn user if PDF creation fails
Change patroncards/create-pdf.pl to redirect with an error message
instead of writing an invalid pdf that does not open in pdf viewer.
To test:
- Apply patch
- Test that pdf creator behaves as before (with valid batches and
patron lists)
- While testing, copy pdf link address from window with title 'Click
the following link(s) to download...'
- Open another staff client browser tab
- Paste link to browser address field, change batch id rsp. patron
list id to an invalid value and submit
- The window should redirect to cgi-bin/koha/patroncards/create-pdf.pl
and display an error message
- Bonus test 1: Create an empty patron list and test patron card
creation. You should get an error message as appropriate.
- Bonus test 2: Use a link with params like the following:
...create-pdf.pl?borrower_number=61&template_id=2&layout_id=1&start_card=1
Verify that you can create a pdf with a valid borrower_number and that
you get the error message with an invalid borrower number
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 14:56:32 +0000 (15:56 +0100)]
Bug 16890: Make TestBuilder generate date for date columns (and not datetime)
TestBuilder should not generate datetime for date columns, but only for
datetime and timestamp columns.
Test plan:
Make sure the change in t/db_dependent/TestBuilder.t are consistent.
Before this patch, 1 of the 2 tests should fail.
After this patch applied, they both should pass.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 12:22:18 +0000 (13:22 +0100)]
Bug 16845: Remove unused C4::Members::ModPrivacy
This subroutine is no longer in used and can be removed safely
Test plan:
git grep ModPrivacy
should not return any occurrences.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 4 Jul 2016 12:30:24 +0000 (14:30 +0200)]
Bug 16810: Fines note not showing on checkout
Fines did not show on patron checkout and detail pages unless amout
was greater than syspref NoIssueCharges.
This patch fixes the logic in
koha-tmpl/intranet-tmpl/prog/en/includes/blocked-fines.inc
Additionally, it changes links to buttons and makes some small
text changes to ease translation.
To test:
- Apply patch
- Display checkout or detail page and verify proper display for
a patron who has
- no fines (no message)
- fines not exceeding syspref NoissueCharges (message)
- fines exceeding syspref NoIssueCharges (message)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 5 Jul 2016 00:10:55 +0000 (02:10 +0200)]
Bug 16682: Fix display if Batch patron modification tool does not get any patrons
To reproduce:
- Go to Tools->Batch patron modification
- Submit without filling any of "Use a file", "Or use a patron list",
"Or list card numbers..." or use a patron lists with zero members
Result: Screen without any information
To test:
- Apply patch
- Repeat steps above
- Verify that you get a nice message
- Verify that the tool works as before
- with invalid card numbers only
- with valid and invalid card numbers
- with valid card numbers only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15006: [QA Follow-up] Only handle login requests in raw_transport
Although mainly hypothetical, it would still be possible to get
response from the server for an acs resend request. (This exception
is allowed in MsgType::handle.)
I also noticed that the response may well be a message from an older
session still.
This patch just removes that exception by only passing login requests
to sub handle in the raw_transport loop.
Test plan:
[1] Verify normal login procedure for raw.
[2] Check a few acs resend requests in raw. They should terminate without
a response.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15006: [QA Follow-up] Satisfy qa tools with one tab less
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Wed, 6 Jul 2016 14:25:21 +0000 (15:25 +0100)]
Bug 15006 Correct indentation of EXPORTs in Sip.pm
Removed tabs and used spaces consistently
Used 'use base' to remove unnecessary BEGIN sub and
explicit setting of ISA at application level
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15006: Centralize timeout logic and allow zero client timeout
Moving timeout logic to one routine (with unit test).
This further implements two suggestions from Kyle and Larry:
[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.
Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Fri, 20 Nov 2015 12:12:48 +0000 (12:12 +0000)]
Bug 15006: Introduce client_timeout in SIPconfig.xml
Most selfchecks have persistent connections and send a
periodic status request at intervals (approx every 5mins appears
the norm) The timeout was dropping connections by default every 30secs
which for the client appears as a very flakey network.
This patch adds a separate parameter client_timeout that can be
used if you do want to force a disconnect if the client sends
no requests for a period. The sample config sets it to 600, but you
can also define a 0 value meaning no timeout. If the parameter is not
defined, it will fallback to service timeout.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restored this patch from Colin in order to separate it from the
get_timeout patch. Adjusted the commit message slightly.
The original value of 600 from Colin's earlier patch may give less
discussion than setting to 0 (no timeout) in a later proposal.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Tue, 5 Jul 2016 09:36:31 +0000 (10:36 +0100)]
Bug 15006 Remove tabs from sip_protocol_loop
Remove the tabs causing inconsistent indentation
of sip_protocol_loop and replace with spaces
Reimplements the renaining parts of Marcel de Rooy's
original QA patch
No logic changes in this patch - layout only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Mon, 4 Jul 2016 15:13:16 +0000 (16:13 +0100)]
Bug 15006 Drop raw connection if login fails
raw_connection was not behaving correctly if an invalid string was
passed or a login failed.
It was not checking that the login succeeded ( it checked that account
existed not that it contained data and it existed even if login failed)
and so failed logins instead of aborting immediately fell through into
the sip_protocol_loop, forcing that to timeout invalid connections.
It now checks that account has id set and returns if not.
The timeout alarm is now set on the while loop, in normal running this
should not be triggered as the socket is opened and the first data
should be a login message and the while loop should only iterate once,
but lets not go into an infinite loop due to unforeseen circumstances.
I have reindented the routine as the flow was not clear (the while was
not indented at all.
Also if using Net::Server::PreFork when a new connection comes in you
may be handed the the successful login parameters from a preceding call.
Because of this you could successfully transmit transactions and Koha
would carry them out without having received a valid login ( and
possibly with the wrong account details!) We now delete any existing
account for new connections.
NB: This patch requires that the patch for bug 13807 has been applied
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 28 Apr 2015 15:00:44 +0000 (17:00 +0200)]
Bug 12178: Update serial status to "claimed" when exporting to CSV
On the same way as late issues, the serial status should be updated to
'claimed' when the issues as exported as csv.
QA note: The updateClaim and UpdateClaimdateIssues subroutine did almost the
same thing, I kick the second on off to centralize the code.
Test plan:
1/ Export some late issues as CSV (serials/claims.pl).
2/ Refresh the page (the export does not do it) and confirm that the
status, the claim date and the claim count have been updated.
3/ Select some others issues, select a notice and send the notification.
Confirm that the behavior is the same.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 9 Jun 2016 15:42:27 +0000 (16:42 +0100)]
Bug 2735: CSS changes
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 9 Jun 2016 15:39:56 +0000 (16:39 +0100)]
Bug 2735: Fix authority search pagination at the OPAC
The authority search pagination displays only 15 pages, even when there
are more.
To fix that, this patch mimic the authorities-home.pl intranet script to
manage the pagination.
Test plan:
Without this patch, do some authority search and click on different
pages.
Apply this patch, redo the same search and make sure the same records
are displayed (i.e. confirm that the pagination still works as before).
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 14 Jul 2016 02:46:17 +0000 (22:46 -0400)]
Bug 16920: sysprefs.sql - missing comma for MaxOpenSuggestions
TEST PLAN
---------
1) back up DB
2) drop database koha_library;
3) create database koha_library;
4) run web browser install, choose ALL defaults
-- notice the SQL syntax warning.
5) apply patch
6) repeat steps 2-4
-- notice SQL syntax warning is gone.
7) run koha qa test tools
8) restore db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 13 Jul 2016 15:41:30 +0000 (15:41 +0000)]
Bug 16917 - Error when importing patrons, Column 'checkprevcheckout' cannot be null
Error:
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'checkprevcheckout'
cannot be null at C4/Members.pm line 697
Test Plan:
1) Attempt to import a patron via csv
2) Note the error
3) Apply this patch
4) Repeat the import
5) No error!
NOTE: Given that all the other tests ran (comment #2), except
those in comment #3, I resorted to following the test plan
above using the attachment provided in comment #5. I
believe the issues in comment #3 constitute other bugs
which need fixing and are unrelated this bug. Applying the
patch does resolve the error triggered, and the code is
good.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Tue, 26 Apr 2016 07:04:17 +0000 (09:04 +0200)]
Bug 16166: Fix t/Cache.t tests
Thou shalt not forget to include changes made in the t/Cache.t
in the patch set.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jacek Ablewicz [Tue, 26 Apr 2016 06:43:12 +0000 (08:43 +0200)]
Bug 16166: Improve L1 cache performance and safety
Bug 16044 introduced two-level caching mechanism to Koha::Cache. By
default, get_from_cache() returns a deep copy of the data structures
stored in L1 cache (aka "safe mode"). For extremely big and/or complex
data structures (like MARC framework hash-of-hashes-of-hashes returned
by GetMarcStructure() ), deep-cloning is currently sub-optimal;
this patch addresses that particular issue. It also provides an
ability to intermix "safe" and "unsafe" cache feches, in such
way that they don't interfere with each other (i.e., eliminating
the risk involved with "unsafe" calls possibly compromising
further "safe" calls).
Test plan:
1) apply patch
2) flush L2 cache if necessary (restart memcached daemon)
3) profile GetMarcStructure() calls before / after patch, e.g. by
running some script which calls it often (like catalogue search
w/ XSLT processing turned on, etc.) - GetMarcStructure() should be
faster than before, in all possible circumstances (eg. 18 msec
per call -> 10 msec p/call)
4) after testing, before returning to the master branch, flush L2 cache
again (restart memcached daemon) - otherwise all system preferences
returned from L2 cache would be suffixed with '-CF0'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Fri, 25 Mar 2016 17:04:14 +0000 (17:04 +0000)]
Bug 13691: Add changes for 3.22
To test:
Run the tests
t/db_dependent/selenium/basic_workflow.t
After you have set up selenium following the tests in the previous patch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 10 Feb 2015 15:07:31 +0000 (16:07 +0100)]
Bug 13691: Add basic selenium script
This script has been used to compare 3.16.x and 3.18.x performances on
bug 13690.
What it does:
- Go on the mainpage and process a log in
- Create a patron category
- Create a patron
- Add 3 items
- check the 3 items out to the patron
- check the 3 items in
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Note the pages have changed so the tests will not all pass.
Also you need Selenium::Remote::Driver installed and staffClientBaseURL
must be set
I will change the tests in a follow up patch. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 10 Feb 2015 15:07:16 +0000 (16:07 +0100)]
Bug 13691: Remove existing selenium scripts
They are not usable.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Colin Campbell [Fri, 6 Mar 2015 11:57:09 +0000 (11:57 +0000)]
Bug 13807 Rework main input loop in SIPServer
Debugging various problems in SIPServer and control of it, found it
could loop on unread buffers (e.g. the LF of a CRLF if it was only
expecting CR) making it unresponsive to signals.
Reworked the input loop with an eye to removing unnecessary whiles
and replacing the while(1) by a while( connection valid)
Enhanced the timeout code by wapping in an eval.
Moved the logic from SIP_read_packet into the server itself
Hopefully this makes the already baroque code easier to navigate
and it did seem the server was the logical place for this
Removed no longer iused SIP_read_packet from Sip.pm
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) prove t/db_dependent/Languages.t
-- noisy output
2) apply patch
3) prove t/db_dependent/Languages.t
-- no noise
4) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No noisy output
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::DelMember function actually deletes reserves, and it is
not properly tested.
To test:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off
Sponsored-by: NEKLS Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 23 Jun 2016 18:51:26 +0000 (14:51 -0400)]
Bug 16805: Log in with database admin user breaks OPAC
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
-- dies before finishing tests
-- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
-- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
-- says 'getalert'
-- all tests pass.
8) Log into OPAC with database admin user.
-- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised
NOTE: Revised test plan, as Jonathan added useful test case.
Works as I've tested above.
Hector tested older test plan which was steps
5,6,8 and 9.
Revised test plan again while tweaking to address comment #9.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Fri, 24 Jun 2016 16:28:27 +0000 (12:28 -0400)]
Bug 16805: Tweak new test message to say getalert
It said 'addalert', which is likely a cut-paste typo.
Plus, let's keep running the other tests if that one
goes bad.
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply this test patch
4) prove t/db_dependent/Letters.t
-- still dies before finished tests,
'addalert' now is 'getalert' in message.
5) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 24 Jun 2016 16:02:59 +0000 (17:02 +0100)]
Bug 16805: Add test to getalert (no param passed)
TEST PLAN
---------
1) apply patch
2) prove t/db_dependent/Letters.t
-- fails
3) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Wed, 22 Jun 2016 17:11:03 +0000 (11:11 -0600)]
Bug 16801 - Include Font Awesome Icons to check/unchek all in Administration > Library transfer limits
For purpose to uniformity and leave just one entry in .po files,
this patch change: Check all/Uncheck all -> to -> Select all/Clear all.
Also added Font Awesome icons.
To test:
-Go to Administration > Library transfer limits
-Notice about Check all/Uncheck all for "For all items types" and
"Policy for:"
-Apply patch and refresh the screen
-Notice about the new Select all/Clear all links with their icons
-Confirm that all links work as expected
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 1 Jun 2016 14:54:09 +0000 (10:54 -0400)]
Bug 16778: Replace usage of Greybox modals with Bootstrap modals
This patch is a proof-of-concept for replacing Greybox modals in
situations where in-modal page transitions happen. This one addresses
patron card export from the patron lists page.
To test you must have at least one patron lists containing patrons.
- Apply the patch and go to Patrons -> Patron lists.
- In the 'Actions' menu associated with your list, choose 'Print patron
cards.' A modal window should be triggered.
- In the modal window, change settings as necessary and click the
"Export" button.
- The modal should reload and display a link to download a PDF. Confirm
that the PDF download works correctly and that the correct patron
batch was processed.
- Repeat the process and confirm at each step that clicking the 'X'
button or the 'Cancel' link dismisses the modal window.
To confirm that changes to the patron card print template has not
adversely affected printing patron cards from the patron card creator
page:
- Go to Tools -> Patron card creator.
- Choose Manage -> Card batches.
- Click 'Export' for any batch.
- Confirm that the Greybox modal still works correctly for patron card
export.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 14 Jun 2016 06:41:03 +0000 (08:41 +0200)]
Bug 16730 - Use member-display-address-style*-includes in moremember-brief.tt
To test:
- Apply patch
- Create a new patron with the same first and last name as an existing
patron. This should trigger a duplicate warning message. Click the
"View existing record" link to trigger a pop-up window with a patron
detail brief view.
- Verify that the address information displays the same way as on the
patron details screen (moremember.pl).
- Change syspref 'AddressFormat' and verify that the address displays
as appropriate.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described: AddressFormat is taken into account on 'view exiting
record' dialog box.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Tue, 7 Jun 2016 07:27:15 +0000 (09:27 +0200)]
Bug 16677 - Use abbr for authorities linked headings
In authorities search results, UNIMARC flavour, linked headings are displayed
with a link type : BT, NT, UF, RT.
This patch adds a abbr tag around those acronyms to know there meaning :
BT = Broader Term
NT = Narrower Term
UF = Used For
RT = Related Term
Acronyms are used because there can be a lot of linked headings, using abbr
will display the complete text on mouse over.
Test plan :
- Use UNIMARC database
- Create an authority with :
250 $a Heading250a
450 $a Heading450a
550 $5 a $a Heading550a
550 $5 g $a Heading550g
550 $5 h $a Heading550h
- Save an index zebraqueue
- Go to intranet authorities search
- Search for "Heading250a"
- You see :
Heading250a
Heading250a
UF: Heading450a
RT: Heading550a ; BT: Heading550g ; NT: Heading550h
- Move your mouse over the acronyms, you see a tip with the complete text
- Same with opac authorities search
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. Translatable.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies the style of some "print slip" links on the checkin
page to make them consistent with other buttons shown in dialogs.
This patch also removes the use of "onclick" in some places in favor of
defining events in the JavaScript.
To test apply the patch and go to Circulation -> Check in.
- Check in an item which belongs at another branch. You should see a
dialog which asks the user to transfer the item. Confirm that the
"Print slip" button looks correct and works correctly.
- Check in the same item again. You should see a different dialog which
has both a "Print transfer slip" and "Cancel transfer" button. The
"Print transfer slip" button should look correct and work correctly.
- Check in an item which is part of a rotating collection. (Or, if Bug
16570 is still open, check in any item) You should see a dialog which
notifies you that the item is part of a rotating collection. The
"Print slip" button in this dialog should look correct and work
correctly.
Followed test plan. Buttons appear as expected. Signed-off-by: Marc Véron <veron@veron.ch>
Revision following QA: Removed redundant class attribute from the print
button tested in step 1.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the Search button in the header into a dropdown that holds the Advanced search and the Item search.
I have rewritten this patch to be independent of Bug 16323 since that patch is so controversial.
To test:
1) Confirm that Advanced search and Item search are both under the 'Search' dropdown menu in the header and both links work as expected
Sponsored-by: Catalyst IT Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that the CAN_user_catalogue test is useless. If a librarian does
not have it, (s)he cannot access to the staff interface.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Fri, 15 Apr 2016 08:49:29 +0000 (10:49 +0200)]
Bug 16271: Allow more filters on /api/v1/holds
borrowernumber parameter is no longer required and you can filter on
every column of reserves table
Some example requests
- GET /api/v1/holds
- GET /api/v1/holds?biblionumber=123
- GET /api/v1/holds?borrowernumber=456
- GET /api/v1/holds?priority=0&found=W
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Wed, 2 Dec 2015 16:56:25 +0000 (10:56 -0600)]
Bug 15172: (follow-up)Serial enumchron/sequence not visible when returning/checking in Items
Display br and span tag only if the value enumchron exists.
To test
-Apply patches
-Follow the previous test plan
-Checkin whichever material (e.g., book) without sequence or enumchrom
-Open up source code for checkin page, search under title and
verify that b and span tags do not appear
Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15172: Serial enumchron/sequence not visible when returning/checking in Items
Displays the items.enumchron-column in returns.pl when checking in Items.
Rewording commit
To test:
-Checkout a barcode for serial with items generated in
Serials > New subscription or item in DB with items.enumchron-column
-Checkin the same barcode, the table Checked-in items will appear without
information about "Publications details (Vol. 400, No. 32)"
-Apply patch
-Checkout and checkin another item of the same serial title
-Notice about the Vol. 400, No. 32 below the serial title.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
items.enumchron-column display successful in returns.pl (Home>Circulation>
Check in)
NOTE: Patch rebased on master
Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 1 Jul 2016 16:00:39 +0000 (17:00 +0100)]
Bug 15128: Do not display "New suggestion" if limit has just been reached
If limit is X and patrons has X-1 pending suggestions, when a new one is
added, the "New suggestion" should not been added.
to avoid another call to SearchSuggestions, we assume than the
suggestion has been correctly added.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 20 Jun 2016 20:04:21 +0000 (16:04 -0400)]
Bug 15128 - Followup
Only check limit for signed in borrower
Show all suggestions after a new one is added
Signed-off-by: Barbara Walters <bwalters@ncrl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 20 Jun 2016 19:25:12 +0000 (19:25 +0000)]
Bug 15128 [QA Followup 2] - Only count pending suggestions for the limit
Signed-off-by: Barbara Walters <bwalters@ncrl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 20 Jun 2016 16:44:38 +0000 (16:44 +0000)]
Bug 15128 [QA Followup] - Make suggestion display after being added
Also fixes the issue that the add suggestion link would sometimes
show even if the patron could not make an additional suggestion.
Signed-off-by: Barbara Walters <bwalters@ncrl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Tue, 14 Jun 2016 20:47:43 +0000 (16:47 -0400)]
Bug 15128 - Add ability to limit patrons open purchase suggestions
To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.
Sponsored by:
North Central Regional Library (http://ncrl.org/)
Signed-off-by: Barbara Walters <bwalters@ncrl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 3 Jun 2016 16:52:01 +0000 (12:52 -0400)]
Bug 14902 - Add qualifier menu to staff side "Search the Catalog"
To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to select search index
I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:
Kyle M Hall [Wed, 15 Jun 2016 14:30:18 +0000 (14:30 +0000)]
Bug 14790 - Add OPAC view link to Serials detail
Test Plan:
1) Apply this patch
2) Browse to subscription-detail.pl for a given serial
3) Note the new "OPAC view" link
4) Click the link, a new tab should open up showing the record
details for that record in the OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 15 Jun 2016 13:55:28 +0000 (13:55 +0000)]
Bug 14790 - Add OPAC view link to items editor
Test Plan:
1) Apply this patch
2) Find a record and open the items editor for it
3) Click the "Actions" button for an item
4) Choose the option "OPAC view"
5) A new browser tab should open to the OPAC details page for the record
whose items you are editing.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 15 Jun 2016 12:27:40 +0000 (12:27 +0000)]
Bug 14790 - Add Opac view link to search results
Test Plan:
1) Apply this patch
2) Perform a staff catalog search
3) Note the new "OPAC view" link
4) Click the link, it should open a new tab to the OPAC details for that
record.
This works fine except that it doesn't open in a new tab. I don't think
it's the fault of the patch, but of browser.js messing with links again
(See Bug 11937).
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 22 Jan 2016 12:43:12 +0000 (12:43 +0000)]
Bug 14757 [QA Followup] - Add Unit Tests
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log