Fridolin Somers [Mon, 18 Jun 2018 07:04:19 +0000 (09:04 +0200)]
Bug 20953: Prevent several discharge requests on OPAC
On OPAC, a user can requested a discharge even if one is already pending.
This generates several pending discharges in staff interface that can not be deleted.
This is because request operation leads to page 'opac-discharge.pl?op=request' and user can refresh this page performing a new request.
Perl code must check that operation is allowed.
Patch reoganised the code so that the following FIXME is obsolete :
'FIXME looks like $available is not needed'
Patch also replaces 'op' arg test to also check undef : input->param("op") // ''
Test plan :
1) Set system preference 'useDischarge' to 'Allow'
2) Choose a patron without checkouts nor fines nor restrictions
3) Log at OPAC and go to patron page /cgi-bin/koha/opac-user.pl
4) Click on 'ask for a discharge' tab
=> You see /cgi-bin/koha/opac-discharge.pl
with text 'What is a discharge? ...'
5) Click on 'Ask for a discharge' link
=> You see /cgi-bin/koha/opac-discharge.pl?op=request
with text 'Your discharge request has been sent ...'
6) In a new browser tab/page, go to intranet on /cgi-bin/koha/members/discharges.pl
=> You see one discharge requets for the patron
7) Come back to OPAC and refresh page
=> You see /cgi-bin/koha/opac-discharge.pl
with text 'Your discharge will be available on this page within a few days.'
8) Come back to intranet and refresh /cgi-bin/koha/opac-discharge.pl
=> There is still one requets for the patron
9) Come back to OPAC and enter URL /cgi-bin/koha/opac-discharge.pl?op=get
=> You see /cgi-bin/koha/opac-discharge.pl
with text 'Your discharge will be available on this page within a few days.'
10) Come back to intranet and refresh /cgi-bin/koha/opac-discharge.pl
=> There is still one requets for the patron
11) Click on 'allow' on patron discharge request
12) Come back to OPAC and refresh /cgi-bin/koha/opac-discharge.pl
=> You see link 'Get your discharge'
13) enter URL /cgi-bin/koha/opac-discharge.pl?op=request
=> You see same page and no new discharge requets is created
14) Come back to intranet on patron details page
15) Remove the discharge restriction
16) Come back to OPAC and refresh /cgi-bin/koha/opac-discharge.pl
=> You see text 'What is a discharge?...'
17) enter URL /cgi-bin/koha/opac-discharge.pl?op=get
=> You see same page and no new discharge requets is created
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mirko Tietgen [Fri, 15 Jun 2018 10:34:51 +0000 (12:34 +0200)]
Bug 20949: (follow-up) debian/control
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mirko Tietgen [Fri, 15 Jun 2018 10:10:19 +0000 (12:10 +0200)]
Bug 20949: Koha depends on Clone
Clone was not declared a dependency before. It used to be a dependency
of Hash::Merge but isn't in the recent version.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Mar 2017 13:13:10 +0000 (14:13 +0100)]
Bug 18250: Force startup order in postinst script
This is a workaround meant to correct upgrading installs.
We force the order by disable/enable.
Test plan:
[1] When upgrading an existing install, check that the startup order
after the upgrade has been corrected in /etc/rcX.d (say X=5).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Mar 2017 12:53:49 +0000 (13:53 +0100)]
Bug 18250: Update LSB block of koha-common init script
Currently koha-common may start before memcached. We should prevent that.
If we add memcached to the LSB section of the koha-common init script,
Debian's insserv will know about this requirement.
Note: This patch is only a step in resolving the issue.
Test plan:
[1] Copy the updated koha-common script to /etc/init.d
[2] Look for S..koha-common and S..memcached in /etc/rcX.d (say X=5)
[3] Run sudo update-rc.d koha-common disable
[4] Run sudo update-rc.d koha-common enable
[5] Look again for S..koha-common in /etc/rcX.d (say X=5).
The number for koha-common should now be higher than for memcached.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Mon, 25 Jun 2018 12:14:43 +0000 (14:14 +0200)]
Bug 19502: Add POD for max_result_window
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Mon, 25 Jun 2018 12:14:32 +0000 (14:14 +0200)]
Bug 19502: Remove debug warn
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Tue, 5 Jun 2018 13:11:34 +0000 (15:11 +0200)]
Bug 19502: Retrieve index.max_result_window from ES
This avoid hardcoding '10000' in two different places and allow users to
adjust this setting.
Also, this patch fixes a bug when the search return less than 10000
results
Test plan:
1. Do a search that returns 10000+ records.
2. Note the warning above the pagination buttons
3. Go to the last page, no error
4. Change the ES setting:
curl -XPUT http://elasticsearch/koha_master_biblios/_settings -d \
'{"index": {"max_result_window": 20000}}'
5. Do another search that returns more than 10000 but less than 20000
6. Note that the warning does not show up
7. Go to the last page, still no error
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Fri, 16 Mar 2018 11:10:37 +0000 (11:10 +0000)]
Bug 19502: Limit pagination to first 10000 results when using ES
This patch is to avoid hitting an error page. We should eventually make the
max number returned configurable for ES.
To test:
1 - Have Koha running ES with 10,000+ records
2 - Search for '*'
3 - Click 'Last' to view last page of results
4 - 'Cannot perform search' error
5 - Apply patch
6 - Search again
7 - View 'Last' page
8 - No error, you go to the last of 10000
9 - Note the warning above the pagination buttons
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 29 Jun 2018 17:09:07 +0000 (14:09 -0300)]
Bug 21009: Fix max length of inputs on editing/adding items
There is a "max length" value you can define at framework level to
limit the size of the input. But it is not taken into account on the
add/edit item form.
Test plan:
- Define a maximum length for an item subfield
- Add or edit an item
=> Without this patch the maxlength attribute of the inputs are not
defined (maxlength="")
=> With this fix you will see the maxlength attributes correctly set
with the value you defined in the framework
Note:
We could/should set this value to the size of the DB column when mapped
For instance 952$u is mapped with items.uri, which is a varchar(255).
This length restriction should done at framework level
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Victor Grousset [Thu, 25 Jan 2018 13:37:56 +0000 (14:37 +0100)]
Bug 20084: Fix Industrial2of5 and COOP2of5 patron card layouts
== Test plan ==
This is an oversimplification of a full patron card setup used in production.
1. Create a batch with 1 patron
2. Create a layout and set
the name
"Print card number as barcode"
"Barcode type:" to "Code 39"
3. Create a card template without filling anything
4. Export the batch using the layout and template
5. You should have a white page with a barcode
And no errors in the relevant log file
This show that this setup isn't completely bogus
(although Code 39 is the only type working...)
6. Layout: set "Barcode type:" to Industrial2of5
7. Export the batch
8. You should have a white page with no barcode
And errors in the relevant log file
"Invalid Characters"
This is the bug.
9. Layout: set "Barcode type:" to COOP2of5
10. Export the batch
11. You should have a white page with no barcode
And errors in the relevant log file
"Invalid Characters"
This is the bug.
12. Apply this patch
13. Retry with both non-working patches
1. You should have a white page with a barcode
2. And no errors in the relevant log file
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 9 Jul 2018 13:24:44 +0000 (13:24 +0000)]
Bug 21054: Remove extraneous </body> tag from sco-main.tt
To test:
1 - Enable sco and setup AutoSelfCheck
2 - Try to use self checkout and print receipt
3 - You shoudl be redirected to the login page
4 - Apply patch and restart all the things
5 - Try to use self checkout and print a receipt
6 - Success!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 21 Jun 2018 21:06:00 +0000 (18:06 -0300)]
Bug 20979: Fix confirm deletion popup when deleting a biblio
When deleting an empty bib, error messages pops up "1 order(s) are
using this record. You need order managing permissions to delete this
record." even though user has superlibrarian permissions. Prevents the
deletion of the bib record.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Arnaud [Fri, 6 Jul 2018 13:40:53 +0000 (13:40 +0000)]
Bug 21046: Return the correct borrowernumber when there is empty cardnumber(s)
Test plan:
- Use a patron with an empty cardnumber to authenticate with ILSDI
AuthenticatePatron
(cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=userid&password=pass),
- make sure you have other patron(s) with empty cardnumber and there
borrowernumber is
smaller than the one you authenticate with,
- you should get a wrong borrowernumber,
- apply this patch,
- test again, you should get the right one
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Mon, 30 Apr 2018 16:47:26 +0000 (12:47 -0400)]
Bug 19617: Allow 'writeoff of selected'
This patch adds a writeoff equivilent to 'Pay selected'
Test Plan:
1) Apply this patch
2) Find a patron with fines
3) On the "Pay fines" tab, select one or more fines and use the
"Write off selected" button.
4) Note the fine amount you used was written off for those fines.
Signed-off-by: Kyle M Hall <kyle@bywatetsolutions.com> Signed-off-by: Martha Fuerst <mfuerst@hmcpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Fri, 8 Jun 2018 08:24:19 +0000 (10:24 +0200)]
Bug 12395: Add FK constraint and use patron-title.inc
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Mon, 16 Apr 2018 21:10:15 +0000 (21:10 +0000)]
Bug 12395: (QA follow-up) Change wording for consistency and fix use CGI;
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 3 Dec 2015 18:01:46 +0000 (13:01 -0500)]
Bug 12395: Use standard <fieldset> + <ol> markup for showorder.tt
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 25 Oct 2015 11:32:45 +0000 (12:32 +0100)]
Bug 12395: (QA follow-up) Add class/id to body tag
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Arnaud [Tue, 16 Jun 2015 08:05:16 +0000 (10:05 +0200)]
Bug 12395: Make received orders table consistent with pending orders table
(links of More column)
Also change "Created by" with "Ordered by" in receive page.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 20 Feb 2015 10:31:52 +0000 (11:31 +0100)]
Bug 12395: Display created_by even if firstname is missing on receiving
On receiving orders, "no name" was displayed if the firstname of creator
was not filled.
The surname should be displayed.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Tue, 10 Feb 2015 09:23:25 +0000 (10:23 +0100)]
Bug 12395: Add unit test to check created_by is correctly set
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Mon, 9 Jun 2014 14:15:17 +0000 (16:15 +0200)]
Bug 12395: Save order line's creator
New MySQL column: aqorders.createdby
Creator's name is displayed on order's receive pages (acqui/orderreceive.pl
and acqui/parcel.pl)
On acqui/orderreceive.pl it replace the name of basket's creator
On acqui/parcel.pl, to avoid adding more data in the table of pending
orders, it is shown in a popup like MARC and Card views
Test plan:
1/ Run updatedatabase.pl
2/ Create a new order and go to the receipt page (acqui/parcel.pl)
3/ Click on "Order" link in column "More" (previously "View record")
4/ A javascript popup should appear with your name in it. Close the
popup.
5/ Click on "Receive" link
6/ Your name should appear in front of "Created by" label, to the right
of the page.
Patch updated with use of atomic update.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 19 Jun 2018 12:45:07 +0000 (12:45 +0000)]
Bug 20650: (follow-up) Add missing include file
This patch adds a missing include of doc-head-open.inc.
To test, apply the patch and export a batch of patron cards. The modal
view for downloading the card batch PDF should work correctly.
Validating the iframe's source should show no relevant errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 24 Apr 2018 13:37:07 +0000 (13:37 +0000)]
Bug 20650: Switch single-column templates to Bootstrap grid: Various, part 3
This patch updates various unrelated templates to use the Bootstrap
grid. In each case, confirm that the indicated page looks correct.
This patch also corrects a couple of capitalization errors and removes
an unused template: virtualshelves/merge.tt.
- Tools -> Patron card creator -> Manage -> Card batches
- Export a batch
- The pages inside the modal window should look correct: Both the "X
batch(es) to export" screen and the "download exported batch(es)"
one.
- Tools -> Patron lists -> Edit list
- The patron list add/edit form should look correct.
- Disable plugins in koha-conf.xml.
- Tools -> Plugins
- The "Plugins disabled" page should look correct.
- Enable plugins in koha-conf.xml
- Tools -> Plugins -> Upload plugins.
- This page should look correct.
- Tools
- The tools home page should show three columns: Patrons and
Circulation, Catalog, Additional tools.
- At viewport width below 768 pixels content should reflow into one
column.
- virtualshelves/merge.tt has been removed as it is unused. Search the
codebase for references to it. There should be none.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 23 Apr 2018 18:26:14 +0000 (18:26 +0000)]
Bug 20641: Switch single-column templates to Bootstrap grid: Various, part 2
This patch updates various unrelated templates to use the Bootstrap
grid. In each case, confirm that the indicated page looks correct.
- Acquisitions -> Vendor -> Add to basket -> From a staged file.
- Logged-in user menu (in the upper right) -> Search history.
- With plugins disabled in koha-conf.xml, go to Tools -> Tools plugins.
- With the EasyAnalyticalRecords system preference set to 'Display,'
view a bibliographic record.
- Choose Edit -> Link to host item.
- Submit a barcode to be linked.
- Configure a MARC subfield (e.g. 100$a) to use the
unimarc_field_225a_bis plugin.
From the MARC edit page, trigger the plugin and confirm that the
page in the popup window looks correct. Confirm that changes made in
the popup window are saved to the corresponding field in the editor.
- Administration -> Funds -> Edit a fund.
- Click 'Select owner.'
- Search for a patron.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 25 Apr 2018 18:07:42 +0000 (18:07 +0000)]
Bug 20220: Move template JavaScript to the footer: Holds
This patch modifies the holds template so that JavaScript is included in
the footer.
To test, apply the patch and initiate the process of placing a hold.
Throughout the process JavaScript-based interactions should work: Patron
autocomplete, datepickers, DataTables, cancel confirmations, etc.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 8 May 2018 13:45:37 +0000 (13:45 +0000)]
Bug 19709: Move template JavaScript to the footer: Labels
This patch modifies the staff client label creator templates so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of
each modified template: All button controls, DataTables functionality,
form validation, etc.
This patch also modifies the templates to use the Bootstrap grid instead
of YUI, and removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and test the following interactions:
- Creating and managing layouts
- Creating and managing batches
- Creating and managing templates
- Creating and managing printer profiles
- Creating quick spine labels
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 26 Apr 2018 18:54:44 +0000 (18:54 +0000)]
Bug 20668: Update two-column templates with Bootstrap grid: Acquisitions part 2
This patch modifies several acquisitions templates to use the Bootstrap
grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags in the modified templates.
Staff client CSS is modified in this patch so that elements which were
styled based on the sidebar's "yui-b" class will work with <aside>.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- I don't have EDI set up, so to test acqui/edi_ean.tt I navigate
directly to /cgi-bin/koha/acqui/edi_ean.pl. It's only the page
structure we're worried about.
- Acquisitions -> Orders search
- Acquisitions -> Vendor -> Invoices -> Invoice search
- View an invoice
- Manage invoice files (Preference AcqEnableFiles must be enabled).
- Acquisitions -> Late orders
Patch applies and operates as described. Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 3 Jan 2018 17:41:09 +0000 (17:41 +0000)]
Bug 20731: Move template JavaScript to the footer: Call number browser MARC plugin
This patch modifies the call number browser plugin so that JavaScript is
in the footer instead of the header.
This patch also makes some unrelated changes: The page title has been
corrected; DataTables code has been removed as it was unused.
To test, apply the patch and configure a MARC framework to use
cn_browser.pl as the plugin for tag 952 subfield o.
Open an item for editing. The "Full call number" field should have an
active "..." link next to it. Clicking this should trigger a popup
window with the Call number browser. Confirm that submitting a new
search from this window works correctly.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes 'credit' account types generate 'Manual Credit' offset.
The original patch used 'Payment' but I think the code wants to
distinguish between payments and manually added credits (otherwise they
would've picked the same accounttype value, and they don't.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20980: (follow-up) Only use UpdateStats for 'payment' and 'writeoff'
This patch makes Koha::Account::add_credit record statistics logs
(through C4::Stats::UpdateStats) only for the 'payment' and 'writeoff'
credit types.
Both credit types are whitelisted in UpdateStats, so we keep the current
behaviour. Another option would've been to add new account types to the
white list, but with the account offsets it seems that using the
statistics table for account changes won't be useful for too long, as
offsets contain the same (and more) information.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20980: Make mancredit.pl use Koha::Account::add_credit
This patch makes creating a manual credit from the UI record the account
offset as 'Manual Credit', and properly set account_offsets.credit_id
instead of account_offsets.debit_id.
To test:
- Create a manual credit (of 'Credit' type) for a known patron (acevedo?)
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM account_offsets;
=> FAIL: The account offset for the manual credit has type=Manual Debit,
credit_id=NULL and debit_id=accountlines_id
- Run the atomic update:
$ updatedatabase
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM account_offsets;
=> SUCCESS: The account offset has been corrected and now has
type=Manual Credit, credit_id=accountlines_id and debit_id=NULL
- Create a new manual credit (of 'Forgiven' type) for a known patron
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM account_offsets;
=> SUCCESS: The account offset has been stored correctly as a credit!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20980: Add 'Manual Credit' and fix existing offsets
This patch adds a new offset type 'Manual Credit'. And adds an atomic
update for fixing existing offsets.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20978: (follow-up) Another use case from C4::Circulation
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds:
- Koha::Account::add_credit
- A single source of truth for accounttype and offset_type values
To test:
- Apply the first patch
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> FAIL: Tests fail!
- Apply this patch
- Run:
k$ prove t/db_dependent/Koha/Account.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds unit tests for Koha::Account::add_credit.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 26 Jun 2018 13:40:22 +0000 (13:40 +0000)]
Bug 20969: (follow-up) Move focus to textarea whe modal is shown
This follow-up adds code to move the mouse cursor to the modal window's
textarea when the modal is displayed.
To test, apply the patch and test the process of adding/editing notes on
an order. Confirm that the focus moves to the textarea when the note
editor modal window is shown.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 20 Jun 2018 12:39:05 +0000 (12:39 +0000)]
Bug 20969: Use modal to add and edit notes from basket
This patch modifies the acquisitions basket page so that links to add or
edit vendor or internal notes trigger a modal with the notes edit form
instead of redirecting to a different page. This is a markup change only
-- The form still submits to modordernotes.pl.
To test, apply the patch and view a basket in acquisitions which has
multiple orders. Test various note controls: Add internal note, Add
vendor note, Edit internal note, edit vendor note.
Confirm that the operations work correctly with multiple orders in the
basket.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Apply Bug 19835
2) Apply this patch
3) Reload marc21 bibliografic frameworks, check loads ok
4) Clean your browser cache
5) Edit a new bib record, fire 007 plugin,
for Map, 04 position, check new 'x'
for Map, 06 position, check renamed 'c'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Victor Grousset [Wed, 20 Dec 2017 16:13:40 +0000 (17:13 +0100)]
Bug 19849: Make a string translatable again after a rebase error
Bug 16621 reverted part of bug 12509
1. Log in the OPAC and staff interface
2. Restrict the user logged in the OPAC (restricting yourself works)
Staff interface → Patron page → Restrictions → Add manual restriction
Put this comment the "OVERDUES_PROCESS Give the books back or we're comming!"
3. Install the fr_FR locale and switch the interface to it
4. Go to OPAC: /cgi-bin/koha/opac-user.pl
5. Then you should see the ugly comment with "OVERDUES_PROCESS"
6. Apply this patch
7. Update the translation: ./translate update or equivalent
8. Open misc/translator/po/fr-FR-opac-bootstrap.po
9. Find the string containing "Restriction added by overdues process"
10. Remove the fuzzy flag
11. Install the language
12. Refresh the page in the OPAC
13. Then you should see the translation + the comment instead of "OVERDUES_PROCESS" + the comment
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Victor Grousset [Wed, 20 Dec 2017 14:15:49 +0000 (15:15 +0100)]
Bug 19849: Minor fixes & refactor of opac-reserve.tt & opac-user.tt
- make next patch easely reviewable.
- fix lone quote. (Replace by <strong>
- add forgotten condition for 9999-12-31
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Wed, 16 May 2018 02:25:38 +0000 (02:25 +0000)]
Bug 7136: Correct description of Grace period for subscriptions
The grace period is used with the serialsUpdate.pl cronjob. It will
generate the next issue and set the one before to 'Late' with
an optional note.
There is on trace of a 'waiting' status for serials.
To test:
- check help file on the subscription edit form for
the description of the 'Grace period'.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 26 Jun 2018 13:05:42 +0000 (13:05 +0000)]
Bug 20507: Shelf browser does not update image sources when paging
This patch updates the shelfbrowser include so that the system
preference check for Coce will function correctly.
To test, apply the patch and test the OPAC shelf browser with each of
the enhanced content options enabled: Coce, Amazon, Google. In each
case, page through the shelf browser to confirm that covers load
correctly.
Signed-off-by: Cab Vinton <bibliwho@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20703: Add confirmation modal when making a credit void
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 3 May 2018 13:17:06 +0000 (09:17 -0400)]
Bug 20703: Add ability to void any credit
At this time, only payments may be voided. There is no reason to have this limitation. There are situations where a librarian may need to void an accidental writeoff, or perhaps void an automatic credit that was created by Koha. For illustration, this is directly from a partner library:
"For example a lost book refund becomes a credit on account. Presently the credit may be applied to a fine for a different item charged to patron. We perform a write off to clear the remaining credit, then add the fine back to the account and give the patron a refund for the lost/refunded amount. Our accounting system ask that we keep the Lost funds/refunds separate from all fines."
Test Plan:
1) Create a fine and write it off
2) Note there is no 'void' button for the writeoff
3) Apply this patch
4) Note the buttons now show
5) Test each button on a writeoff
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20946: (QA follow-up) make outstanding_debits return the account lines only
This patch was discussed with Jonathan on a QA conversation. It is
better to keep this simpler and more reusable. And is the right approach
in this case.
This patch makes Koha::Account::outstanding_debits return the account
lines, and a method is added to Koha::Account::Lines so the outstanding
amount is calculated on the resultset. This is done the dame way it was
done before, and the tests got adjusted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20946: Use K::Account->outstanding_debits in pay.pl and paycollect.pl
This patch changes the how account lines are fetched (using
Koha::Account->outstanding_debits) so credits are not picked.
To test:
- Add a $5 credit to a patron
- Add a $1 fine
- Go to the 'Pay fines' tab
=> FAIL: Credit is displayed
- Try to pay all fines
=> FAIL: You are told to enter a value less than or equal to -4.00
(Observe you cannot do that)
- Apply this patch
- Reload
=> SUCCESS: Credit is not displayed
=> SUCCESS: You are able to pay all fines
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a handy method that returns the total for outstanding
debits (i.e. those that haven't been canceled with credits), and the
corresponding Koha::Account::Line objects.
Unit tests are added.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> SUCCESS: tests pass!
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Wed, 4 Jul 2018 17:55:14 +0000 (14:55 -0300)]
Bug 21029: Make "Suspend until:" translatable
The label was part of the holds.js file. As .js files are never
translatable it needs to be moved to template level.
Test plan:
- Place a hold on an item
- Go to the patron account
- Click on the Suspend button on the holds tab
- View the modal, the label before the date field "Suspend until:" is
now translatable.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Since this commit AddReturn return a Koha::Issue object, not a hashref
with item's info.
Test plan:
1 - Enable SIP server on your test instance
For kohadevbox:
cp /etc/koha/SIPConfig.xml /etc/koha/sites/kohadev/
create patron with user/pass term1/term1 and grant circulation
privileges
2 - enable AutomaticItemReturn
3 - Checkin an item which will generate a transfer via SIP2:
perl /home/vagrant/kohaclone/misc/sip_cli_emulator.pl -a localhost -p
6001 -su term1 -sp term1 -l LPL --item {BARCODE} -m checkin -t
CR
4 - Note no CT field
5 - Apply patch
6 - Repeate checkin via SIP2
7 - Transfer destination is correctly returned in CT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Andrew Isherwood [Tue, 24 Apr 2018 15:03:40 +0000 (16:03 +0100)]
Bug 20651: Improve full supplier metadata display
This patch improves the display of the extra metadata that may be
returned by an ILL supplier.
The display of the metadata has been moved from the "Toggle full
supplier metadata" link at the bottom of the page to a button on the
right of the request toolbar, labelled "Display supplier metadata".
Clicking this button opens a modal displaying the metadata.
To test:
1) Ensure ILL is enabled and you have at least one request
2) From the "View ILL requests" page, click "Manage request" on a
request
3) Click the "Display supplier metadata" button on the right of the
toolbar
4) Observe that a modal opens containing the metadata
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
The modal looks good!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 29 Mar 2018 11:33:16 +0000 (07:33 -0400)]
Bug 20467: (QA follow-up) Add Branches plugin to template
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Fri, 23 Mar 2018 01:03:00 +0000 (01:03 +0000)]
Bug 20467: Add ability to batch add items to a course
Some librarians have requested the ability to batch add items to a
course using the same settings for all items.
Test Plan:
1) Apply this patch
2) Create a new course
3) Click the new 'Batch add reserves' button
4) Enter some valid and invalid barcodes in the text box, add some settings
5) Submit the batch, note the results list added items and invalid barcodes
6) Note the valid items were added to the course
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This followup fixes all repeatability cases, from
updates 23+24+25 and a few older ones.
To test:
0) Apply both patches
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check repeatability...
Bibs and auth frameworks checked against LOC description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Repeatability checks on followup
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 22 Feb 2018 14:46:12 +0000 (15:46 +0100)]
Bug 20272: Changes for Breeding.pm and Record.pm
In Breeding.pm we let Z3950Search return the xslt handler error codes back
to the template. They are converted to text messages by using an new include
file (added for opac and intranet now). The generic xslt_err code is now
obsoleted.
In Record.pm the errstr call is removed. The croak is done with the new
error code in err. This seems sufficient.
Test plan:
[1] Run Breeding.t
[2] Run Record.t
[3] Add a nonexisting xslt file to one of your Z3950 targets. Search on that
target and check if you see a error 'XSLT file not found'.
The bonus is these error messages are now translatable as they are in
the templates
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 22 Feb 2018 13:52:29 +0000 (14:52 +0100)]
Bug 20272: Replace error numbers by codes in XSLT_Handler
We remove the error numbers 1 to 7 by readable codes.
And remove the errstr attribute (not used widely).
Make XSLT_Handler a little bit less noisy by defaulting print_warns to
false unless $ENV{DEBUG} is set. (See also bug 19018).
The unit has been changed accordingly.
(A few warnings are no longer tested.)
Test plan:
Run t/db_dependent/XSLT_Handler.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 29 Mar 2018 13:32:19 +0000 (13:32 +0000)]
Bug 20495: Remove get_saved_report
To test:
1 - prove t/db_dependent/Reports/Guided.t
2 - grep "get_saved_report" - ensure there are no occurences of the
singular form
3 - create, save, edit, and convert a report
4 - access a public report and report json from opac and staff client
5 - Ensure all function as expected
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 22 May 2018 16:29:09 +0000 (16:29 +0000)]
Bug 20793: (follow-up) Add style to the non-link hold count on detail page
This small follow-up changes the style on the bibliographic detail page
of the hold count so that it looks similar whether it's a link to holds
or not.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 20 May 2018 00:42:28 +0000 (02:42 +0200)]
Bug 20793: Don't show a holds link in staff for users without permission
On the results list in staff the 'Holds (x)' link always shows
independent of the permissions of the staff user.
This patch tightens the permission checks on the result page
to explicitly check for the place_holds permission.
To test:
- Create a staff user with place_holds permission
- Check the result list, you should see 2 links to the
holds page:
- 'Place holds' on top of the results list
- 'Holds (x)' at the bottom of each entry in the results
list
- Verify both links work
- Create a staff user without place_holds_permission
- Without the patch you'll see the second link,
but it will lead to a permission error
- With the patch you'll still see the 'Holds (x)', but
it will no longer be a link.
- Go to the detail page of a record with an existing hold.
- Repeat test with both staff users.
- One time the Hold information in the bibliographic information
should show as a link, the other time as a simple text.
Displaying the information about existing holds still make sense
as this is the current beheviour.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Wed, 27 Jun 2018 13:00:17 +0000 (13:00 +0000)]
Bug 7547: (QA follow-up) Make button background transparent for consistency
Test plan:
Add some records to cart in opac and show the cart, look at the print button/link
--> without patch it has darker background than other buttons
--> with this patch it has the same background
Note: tested wir firefox 45, firefox 60 and chromium 66
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 21 Jun 2018 17:31:44 +0000 (17:31 +0000)]
Bug 7547: printing a sorted cart
This patch adds a DataTables-generated print button to the OPAC cart. To
make that process easier, the DataTables plugin has been upgraded to the
latest version (1.10.18) with the Buttons plugin included.
Changes to the OPAC LESS file style the DataTables button to look like
the static version.
Other templates in the OPAC which use the DataTables plugin have been
modified to use up-to-date option names.
To test, apply the patch and add several titles to the cart.
- Open the cart
- Re-sort the cart using something other than the default sort
- Click the 'Print' button.
- A print view should open in a separate window, sorted correctly,
and automatically show the print dialog.
- Click the cart's 'More details' button and click the print button.
- This should trigger the print dialog directly.
- Test DataTables sorting on other modified pages:
- Bibliographic detail page (holdings table)
- Course reserves (table of courses)
- Course details (table of titles)
- Full subscription history
- Detail page for a subscription -> More details -> Full history
- Most popular
- Purchase suggestions
- Self checkouts
- Tag cloud
- Your fines
- Your interlibrary loan requests
- Your reading history
- Your search history
- Your search IDREF for ppn (I don't know how to test this)
The DataTables plugin is removed from "Your routing lists" and Self
check-in because it is unused.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 31 May 2018 13:29:33 +0000 (13:29 +0000)]
Bug 15360: Incorrect or mislabeled behavior on Authorities "New from Z39.50" Button
This patch makes a third stab at resolving this issue by reorganizing
the authorities toolbar buttons to more closely match the bibliographic
toolbar buttons:
- "New from Z39.50" has been added to the "New authority" dropdown.
- "Edit" is now a dropdown, like on the bibliographic detail page:
- Edit record
- Edit as new (duplicate)
- Replace record via Z39.50/SRU
- Delete record
To test, apply the patch and go to the authorities module. Testing with
existing Z39.50 authority sources configured:
- On the authorities home page and the authorities search results
page, the "New authority" menu should have a "New from Z39.50" link.
- View the details for an authority record. The menus should appear as
described above. Test each option.
Remove all Z39.50 authority servers and test again. The "New from
Z39.50" link should no longer appear.
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 25 Jun 2018 15:00:42 +0000 (15:00 +0000)]
Bug 20559: Compiled CSS
This patch contains the compiled OPAC CSS.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Mon, 25 Jun 2018 14:54:08 +0000 (14:54 +0000)]
Bug 20559: Occurrences of loading-small.gif still exist
This patch removes some leftover references to a file which no longer
exists. In the OPAC, loading-small.gif was included in CSS which was
never used. In the staff client, loading-small.gif should have been
corrected to spinner-small.gif.
To test, apply the patch and go to Tools -> Batch record modification.
- Submit a batch of records to modify
- In the table of titles which will be modified, click the 'Show MARC'
button.
- The modal preview window should show "Loading" and an animated
spinner before the MARC record is loaded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Wed, 20 Jun 2018 17:16:16 +0000 (17:16 +0000)]
Bug 20931: JS error "ReferenceError: $ is not defined" when CircSidebar is turned on
This patch reorganizes the way sidebar menus get highlighted based on
the current page. A global function is added to handle most cases.
Individual menu-handling scripts have been modified to handle only the
edge cases which aren't covered by the global one.
A new class is added to the global CSS file so that highlighted menu
links can be custom-styled.
To test, apply the patch and clear your cache if necessary.
View various pages to confirm that current-page-highlighting in the
sidebar menu is working correctly and that there are no JS errors in the
browser console. For example:
And with CircSidebar turned on test various circulation pages, e.g.
- Circulation -> Set library
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Thu, 21 Jun 2018 15:11:54 +0000 (11:11 -0400)]
Bug 20977: Javascript vars used in confirm_deletion in catalog.js do not match strings in catalog-strings.inc
The naming mismatch can cause javascript errors.
Test Plan:
1) Confirm the string vars used in catalog.js match the ones in
catalog-strings.inc
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Lee Jamison [Wed, 30 May 2018 00:26:56 +0000 (00:26 +0000)]
Bug 17153: Redirect to search when logging in from search
This patch is a fresh attempt at redirecting back to search
results after logging in on opac-search.pl
To test:
- Perform an OPAC search
- Login on opac-search.pl with the search results displayed
- The page is redirected to opac-user.pl
- Log out
- Apply the patch
- Perform a new OPAC search
- Note the URL query string
- Login on opac-search.pl with the search results displayed
- The opac-search.pl page should be displayed with the correct
query string and the page should indicate a logged in status
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and the patch works.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 12 Jun 2018 15:57:56 +0000 (15:57 +0000)]
Bug 20921: Add borrowernumber and branchcode as html attributes
To test:
1 - Apply patch
2 - Visit the opac
3 - Sign in
4 - You should not see any difference
5 - Inspect the element 'Welcome, {username}'
6 - Note the attributes for borrowernumber and branchcode
7 - Add to OPACUserJS:
$(document).ready(function(){
console.log( $(".loggedinusername").attr('data-branchcode'));
console.log( $(".loggedinusername").attr('data-borrowernumber'));
});
8 - Check the console and note you can see the info expected
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log