Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Kyle M Hall [Thu, 21 Mar 2013 11:18:50 +0000 (04:18 -0700)]
Bug 9448: Add separate permission for writing off fees
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12079: ensure that CheckReserves() includes reserve_id in its response
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 6 Jan 2014 18:46:02 +0000 (13:46 -0500)]
Bug 11484: Add option to cleanup_database.pl to purge Z39.50 search records from reservoir
It would be good to be able to specifically target import records from
Z39.50 for cleanup.
Test Plan:
1) Apply this patch
2) Import one or more batch record sets into Koha
3) Perform some Z39.50 searches
4) Run this command: misc/cronjobs/cleanup_database.pl -v --z3950
5) Verify that only Z39.50 records were deleted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12081: make tmpl_process3.pl delete ts temp files
This patch enable deletion of temp files used by
tmpl_process3.pl.
Just removed coments on existing code
To test:
1. Do a count of files on /tmp ( ls /tmp | wc -l )
2. Update preferred language
3. Count again, new files on /tmp
4. Apply the patch
5. Update again, check, no new files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I watched what temp files were actually in /tmp to make
sure other processes didn't magically increase/decrease
the number.
$ perl translate update {lang code}
generated 10 temporary files for me (2x5 po files). After
removing those ten files, and applying the patch, no
other files were generated.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
These lines has been commented by commit a399dcefad193fc21ef2dc1fe31d07686ab2da46 without any apparent good
reason.
Pasi Kallinen [Wed, 29 Jan 2014 07:37:18 +0000 (09:37 +0200)]
Bug 11630: improve parsing of age restriction markers
This patch makes the parsing of AgeRestrictionMarker values consider
the case where the marker is immediately followed by the age, e.g.
"K16" in Finland.
How I tested:
[1] Configure Age Restricition (see Syspref AgeRestrictionMarker) and
have a biblio record with e.g. PEGI 99 in age restriction field.
[2] Try to check out to a patron with age < 99
[3] Check out should be blocked
[4] Change entry in age restriction field to PEGI99
[5] Checkout should be possible
[6] Apply patch
[7] Checkout schould now be blocked
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 9 Apr 2014 08:24:24 +0000 (10:24 +0200)]
Bug 12052: New syspref to display message on the OPAC patron summary page
Test plan:
Fill the OPACMySummaryNote with HTML code or just text.
The content should be displayed at the OPAC on the summary page for
patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Rephrased the pref text a little bit, using 'logged in' instead of
'connected', also added " so the description appears correctly in the
pref editor.
Mason James [Mon, 16 Sep 2013 03:12:16 +0000 (15:12 +1200)]
Bug 10825: don't display enum/chron twice for items received via the serials module
TEST PLAN
---------
1) In the staff interface, display a bib that has one or more items
that were received in the serials module. The following query
can identify them:
-- in MySQL:
SELECT items.biblionumber,items.enumchron,serial.serialseq
FROM items,serial,serialitems
WHERE items.itemnumber=serialitems.itemnumber
AND serialitems.serialid=serial.serialid;
2) Note that in the holdings tab, the serial enumeration/chronology
is displayed twice.
3) Apply the patch
4) Refresh the screen
4) Now, the enum/chron should be displayed only once per item.
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Template change only.
Mark Tompsett [Thu, 6 Mar 2014 06:29:39 +0000 (01:29 -0500)]
Bug 11797: fix odd number of elements in hash warning (MARC21)
This was discovered when someone triggered an authority search
on an authority record that was missing what is assumed the
default subfield for a given field.
It, however, also can be triggered in an OPAC authority search
by looking at the record that lacks the default subfield for a
given field.
TEST PLAN
---------
1) Create an authority record with 180$x and NOT 180$v.
See C4::AuthoritiesMarc::BuildSummary in the 1.. foreach loop
for known tags and default values. The default subfields are
the first letter of the $subfields_to_report string.
2) Trigger the bug:
Method 1: /cgi-bin/koha/opac-authoritiesdetail.pl?authid=#
Where # is the authority id of your tweaked record.
The error occurs in Normal view.
Method 2: Home -> Cataloging -> + New record
-> Click the 'Tag Editor' on 100$a
Editing of $a to $b and back may be required.
3) Notice there is an error log entry.
4) Apply the patch
5) Attempt to trigger the bug again
6) That specific error log entry is not generated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Could generate the warning with a missing 151$a with both methods.
No warning anymore after applying this patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unit tests for C4::AuthoritiesMarc::BuildSummary
for both UNIMARC and MARC21 and a regression test for the "Odd
number of elements in anonymous hash" warning.
To test:
[1] Run prove -v t/db_dependent/AuthoritiesMarc.t. It should
report one failure.
[2] Apply the main patch.
[3] Run t/db_dependent/AuthoritiesMarc.t again; it should pass.
Bug 5052: make it possible to pick a language if all choices are sublanguage
This was tricky to catch. In current implementation, Bug 6755
introduced in C4/Templates.pm as condition to send the array of
hashrefs of languages that (@$languages_loop<2), but with one
language group that condition is false, there is only one
element in that array.
This patch changes that condition to have more than one language
selected, grouped or not.
Also send $bidi value always, that was only sent if there is
more than one group language.
To test:
1. Translate to en-GB and en-NZ, or simply do mkdirs
on intranet-tmpl/prog and opac-tmpl/bootstrap
2. Go to Administration > System preferences > I18N
enable those languages on staff/opac
3. Check that language chooser is nowhere to be found
4. Apply the patch
5. Reload staff/opac, now you can see language chooser
NOTE: I made little changes on staff, but can't replicate
bootstrap colors for selected/unselected language. Someone
need to touch css files to make it happen. But that is
current behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Good catch!
Robin Sheat [Mon, 17 Mar 2014 05:33:00 +0000 (18:33 +1300)]
Bug 11947 - renumber reserves when hold is confirmed
Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Owen Leonard [Fri, 11 Apr 2014 16:40:20 +0000 (12:40 -0400)]
Bug 12075: fix keyboard shortcuts broken by jQueryUI upgrade
The recent jQueryUI upgrade broke keyboard shortcuts in the staff client
because of changes to the jQueryUI API. This patch fixes the problem.
To test, apply the patch and clear your browser cache if necessary.
- View any page in the staff which includes header search tabs for check
out, check in, or catalog search (staff client home page or
circulation page for instance).
- Test the keyboard shortcuts: Alt-q for catalog search, Alt-u for check
out, Alt-r for check in.
- Each keyboard shortcut should select the correct tab.
Followed test plan, patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed that the shortcuts were broken before the patch
and now work again after applying it.
Fridolin Somers [Mon, 24 Feb 2014 11:15:55 +0000 (12:15 +0100)]
Bug 11846: Correct database update for restrictions with date 9999-12-31
The borrowers with indefinite restrictions have borrowers.debarred with '9999-12-31'.
Database update for this bug contained :
INSERT INTO borrower_debarments ( borrowernumber, expiration, comment )
SELECT borrowernumber, debarred, debarredcomment FROM borrowers WHERE debarred IS NOT NULL
For borrowers where borrowers.debarred is '9999-12-31', this value
is copied into borrower_debarments.expiration.
This is not correct because borrower_debarments.expiration must be
NULL for indefinite restrictions.
This patch corrects update 3.13.00.035 and also adds an update for
databases already updated.
Test plan :
- Use a database with version 3.13.00.000
- Set a borrower as restricted for ever (leave until empty)
- Use sources to master + patch
- Perform updatedatabase
- Look at borrower details, tab "Restrictions"
=> Without patch, you see Expiration 31/12/9999
=> With patch, you see Expiration Infinite
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested both DB revisions by resetting Version of my database (and
adding a SetVersion after the revised older dbrev). This was possible
since the debarred field still exists in borrowers. (I have my doubts
about that, but that goes outside the scope of this report.)
Also note that routine _UpdateBorrowerDebarmentFlags puts back 9999-12-31
into borrowers for indefinite restrictions (which looks not very consistent).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12073: don't show link URLs when printing Bootstrap OPAC detail page
On OPAC Bootstrap detail page, by clicking Print link on the right the
page is printed. But the printed page contains HTML <a> anchors URL
attribute. It's useless, and unreadable. It isn't the case with prog
theme.
This patch hides all <a> href attributes when printing any OPAC page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and improves the printed detail page's readability.
Currently there is no less file for the print.css.
Owen Leonard [Thu, 10 Apr 2014 19:50:40 +0000 (15:50 -0400)]
Bug 12069: redirect to staff login if you access members/mod_debarment.pl when logged out
members/mod_debarment.pl's call to checkauth should pass 'intranet' so
that if the user happens to be logged out they will be redirected to the
staff client login form, rather than the OPAC.
To test, apply the patch and log in to the staff client:
- Add a restriction to a patron's account.
- View the restrictions tab on the patron's account. You should see the
restriction and a "Remove" link for that restriction.
- In another tab, log out of the staff client.
- In the first tab, click the "Remove" link. You should be redirected to
the staff client login page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch! Works as described, passes all tests and QA script.
Bug 12076: better detect an untranslatable template construct
Per bug 6458, template constructs of the form
<li [% IF (foo) %]selected="selected"[% END %]...
are forbidden as they can cause problems with translated templates.
However, the tt_valid.t test currently doesn't catch the variation
where '-' is used to suppress extra whitespace:
<li [%- IF (foo) -%]selected="selected"[%- END -%]...
This patch corrects the issue.
To test:
[1] Temporarily add the following line to a template file:
<li [%- IF a -%]a="a"[%- END -%] />
[2] Run prove -v xt/tt_valid.t. Note that no error is reported.
[3] Apply the patch, and rerun the tt_valid.t test. This time,
an error should be reported.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, detects the forbidden pattern
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Kyle M Hall [Fri, 7 Mar 2014 14:05:31 +0000 (09:05 -0500)]
Bug 11563: (follow-up) add noEnterSubmit class to pulldowns
When using Chrome on Mac OS X, form submits are triggered by hitting
enter when focused on a select. This is not an issue with any other
combination of browser and operating system that I am aware of.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Tue, 25 Feb 2014 11:13:13 +0000 (12:13 +0100)]
Bug 11563: restore preventing the enter key from submitting several forms
Several forms that take patron or item barcodes as input stopped
preventing the enter key (which is often sent by barcode scanners)
from submitting the form.
The code binding the CSS class noEnterSubmit to the handler preventing
submission when hitting the enter key was no longer triggered. This is
because this class is added using JavaScript in $(document).ready() and
the keypress event listerning is also set using $(document).ready().
This patch corrects by using JQuery live() with will set event handlers
for HTML generated with JavaScript.
Also sets noEnterSubmit to use the checkEnter(e) function, as that has
broader browser compatibility. Also corrects a small bug, for IE,
window.event must be used, not event alone.
Test plan :
- Flush browser cache (Crtl+F5) to update js files
- Go to patron creation : members/memberentrygen.tt
- Type a text in all mandatory inputs
- Type some caracters in a non mandatory input
- Press Enter key
=> Without patch : the form is submitted
=> With patch : the form is not submitted
- Try to set several lines in a textarea
=> It works (checks that in this case enter key is allowed)
- Test other pages usign noEnterSubmit class :
cataloguing/additem.tt
course_reserves/course.tt
members/mancredit.tt
members/maninvoice.tt
patron_lists/list.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested in Firefox and Chromium.
Passes tests and QA script.
Jonathan Druart [Wed, 19 Mar 2014 15:38:20 +0000 (16:38 +0100)]
Bug 11960: replace unnecessary call of GetMemberDetails by CanBookBeRenewed
C4::Circulation::CanBookBeRenewed called C4::Members::GetMemberDetails to
retrieve categorycode and branchcode.
- categorycode is used to retrieve the issuing rule
- the borrower information is passed to
C4::Circulation::_GetCircControlBranch. Which only uses the branchcode
parameter.
GetMemberDetails does a lot of calls/queries (patronflags,
account, etc.) that are not needed by CanBookBeRenewed.
This patch replaces it with a call to C4::Members::GetMember.
Note: I presented this small optimisation during a quick introduction to
NYTProf (hackfest 14 in Marseille).
Test plan:
- launch member unit tests
- check the code
Checking the code resulted in the following:
CanBookBeRenewed builds a hash reference from the borrowernumber
(2482). Note it is only used in this function and not passed in.
_GetCircControlBranch (2485) requires that hashreference to
have a branchcode key. As stated above.
The following line (2486) requires it have a categorycode key.
As such, C4::Members::GetMemberDetails is confirmed to be
overkill, and C4::Members::GetMember is sufficient.
Testing Done
------------
0) Back up DB
1) Make sure MPL is in the list of libraries.
2) Apply the patch.
3) run the koha qa test tool
4) prove -v t/db_dependent/Circulation.t
Patch applies cleanly. QA Test tool was all OK. All tests ran successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 22 Jan 2014 14:50:16 +0000 (09:50 -0500)]
Bug 11598: Add --text option to overdue_notices similar to --html option
We have a number of reports of libraries that were upset by Bug 10720
being fixed! These libraries preferred this single file output, but as
text only. We should bring back this behavior, but as a feature, not a
bug.
Test Plan:
1) Apply this patch
2) Run overdue_notices.pl --html
3) Note the output is wrapped in html tags
4) Run overdue_notices.pl --text
5) Note the same output, but not wrapped in html tags
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To test, add the -n parameter.
The filename generation could be refactored but not blocker.
Bug 12040: Add 3 parameters to runreport.pl for SMTP authentication
This patch adds three optional parameters to runreport.pl
to allow authentication with the SMTP server.
--username -> Username to pass to the SMTP server for
authentication
--password -> Password to pass to the SMTP server for
authentication
--method -> Method is the type of authentication.
Ie. LOGIN, DIGEST-MD5, etc.
Test Plan
---------
As for testing manually using a Gmail account:
1. Set up your sendmail as shown in
misc/cronjobs/CONFIGURE.gmail
2. Before applying this patch, run misc/cronjobs/runreports.pl
on your favorite report including the proper email parameters
against your gmail account.
3. Note the failure message stating the authentication
requirement.
4. Apply this patch, and return the script including the
additional parameters and specifying "LOGIN" for the method.
5. Note the successful send.
6. perldoc misc/cronjobs/runreport.pl
7. Run the koha qa test tool.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11441: enhance remove_unused_authorities.pl ability to select records
remove_unused_authorities.pl previously required that --aut be supplied
to specify one or more authority types to check for unlinked authority
records. If --aut was omitted, it would default to search for
records of authority type NC, which is not present in many (or any?)
Koha databases.
Now, if --aut is omitted, unlinked authority records of any type
are removed.
To test it:
Parse only PERSO_NAME authorities:
misc/migration_tools/remove_unused_authorities.pl -aut PERSO_NAME
Parse all authorities:
misc/migration_tools/remove_unused_authorities.pl
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 24 Mar 2014 14:25:05 +0000 (15:25 +0100)]
Bug 11995: restore ability of serialsUpdate.pl to calculate next serial issue dates
Bug 7688 changed the prototype for GetNextDate, but the serialsUpdate.pl
cronjob script had not been updated. This patch fixes the problem.
Test plan:
Before applying the patch:
1/ Check that the following SQL query returns something:
SELECT serial.*
FROM serial
LEFT JOIN subscription ON (subscription.subscriptionid = serial.subscriptionid)
WHERE serial.status = 1
AND DATE_ADD(planneddate, INTERVAL CAST(graceperiod AS SIGNED) DAY) < NOW()
AND subscription.closed = 0;
2/ Run misc/cronjobs/serialsUpdate.pl -v
It should die with an error message like this:
Can't use string ("2011-03-05") as a HASH ref while "strict refs" in use
3/ Apply the patch
4/ Run misc/cronjobs/serialsUpdate.pl -v
It should exit normally and print messages like this:
Serial issue with id=XX updated
5/ Run the Koha QA test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:16:21 +0000 (10:16 +0100)]
Bug 7267: Add account number to German PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pagesde
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:13:33 +0000 (10:13 +0100)]
Bug 7267: Add account number to English PDF templates
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pages
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
- Repeat with pdfformat::layout3pages
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:17:44 +0000 (10:17 +0100)]
Bug 7267: Add account number to French PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout3pagesfr
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sat, 1 Mar 2014 08:33:27 +0000 (09:33 +0100)]
Bug 11828: (follow-up) add new option to OrderPdfFormat
To test:
- Check appearance of the OrderPdfFormat system preference
It will offer a pull down with options, including
"German 2-page"
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Wed, 26 Feb 2014 16:50:10 +0000 (17:50 +0100)]
Bug 11828: Add German translation of layout2pages PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pagesde
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check everything is translated into German and the formatting/layout
looks ok
Followed test plan and compared English with German printout.
German version is OK.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Thu, 3 Apr 2014 00:22:44 +0000 (20:22 -0400)]
Bug 11885: (follow-up) make default styling consistent with previous look
Jonathan Druart raised the following three issues:
1/ subtags was bold before patch
2/ 1 dash existed between tag and tag name
3/ A space has been added ("606 #1 - Sujet nom commun"
becomes "606 # 1 Sujet nom commun", "101 ## - Langue"
becomes "101 # # Langue")
This patch addresses them in the following way:
1/ You will note that @ was not bold on the 0 tab.
Every other tab were bold. By making the similar template
into a procedure based on the 0XX tab, bolding was lost.
This patch bolds all subtags including the @, so that
the visible change is minimized.
2/ The dash was programmatically added in at the code stage
previously. This bug fix splits the the single concatenation
mess into parts which can be styled. This puts the dash back
into the template. However, it should be noted that the
spacing for the 0 tab's tag and tag description will have an
extra space after the hypen that was lacking before.
3/ <span>...</span><span>...</span> is different than
<span>...</span>
<span>...</span>
The later puts that extra space. This patch fixes that.
See comment 1 for the test plan.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described.
Small koha-qa errors fixed in followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Pasi Kallinen [Tue, 4 Mar 2014 06:57:11 +0000 (08:57 +0200)]
Bug 11885: fix inconsistent HTML in MARC Details
In Catalog > MARC Details, the HTML in the different tabs is slightly
inconsistent and doesn't differentiate different elements, making CSS
styling complicated or impossible:
* tab 0 has <p class="subfield_line"> whereas all the other tabs
have just <p>
* all other tabs wrap the subfield character in <b> tags, except
for tab 0
* the MARC tag title is a single div with the tag, the indicators
and the field description.
Attached patch folds all the tab outputs into a single TT BLOCK,
which is then reused. It also marks the separate parts of the tag
title in their own spans.
The output should be nearly identical to previous behaviour, minus
a dash from the tag title descriptions - it was used to separate
the tag from the description. The description can now be styled
separately from the tag itself, so the dash can be added with CSS,
if necessary.
Revised test:
1) Find a biblio
2) Edit the record so that there is something in every tab (0-9).
3) Save and then click 'MARC' in the left pane to view the
MARC details.
4) Note the contents of each tab.
5) Apply patch
6) Compare the MARC details output to what was noted. Should
be the same, minus a dash in each of the tag title descriptions.
Signed-off-by: Pasi Kallinen <pasi.kallinen@pttk.fi> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you have search suggestions enabled in the OPAC and click the "Check
for suggestions" link before it is replaced with the JS-rendered output
you will get a template error. This patch corrects it.
To test you must have the bootstrap theme enabled and at least one
OPAC plugin enabled in Administration -> Did you mean?
- Perform a search in the OPAC.
- Look for a box which says "Not what you expected? Check for
suggestions"
- Click the "Check for suggestions" link before it disappears. If
necessary disable JavaScript in your browser so that the link doesn't
disappear.
- The search suggestions page should render without errors.
Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The non-Javascript fallback link now works correctly.
Passes tests and QA script.
Srdjan [Fri, 1 Nov 2013 08:24:11 +0000 (21:24 +1300)]
Bug 11184: correct attribute cloning for the patron editor
This patch fixes Perl warnings logged when setting up the
patron attribute form in the patron editor.
To test - Patron details entry page:
* Have ExtendedPatronAttributes enabled. Check that "Additional
attributes and identifiers" section behaves.
* Verify that editing and saving a patron record does not
result in the following sorts of entries in the Apache log:
se of uninitialized value $_ in hash element at memberentry.pl line 798
Use of uninitialized value in anonymous hash ({}) at memberentry.pl line 798
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different types of patron attributes:
- repeatable
- linked to an authorized value
- free text
Tested editing, adding, removing one of multiple, adding multiple,
etc. No regressions found.
Passes all tests and QA script.
Owen Leonard [Wed, 9 Apr 2014 16:41:24 +0000 (12:41 -0400)]
Bug 10865: (Follow-up) Add CSS style for form hints
This patch adds a new "hint" class for displaying information relating
to a form field. On the list edit screen the hint also has an alert
class to highlight it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Works as advertised.
Tested with Bootstrap and prog theme. Some notes:
- When OpacAllowPublicListCreation is turned off, the permissions
don't show.
- When OpacAllowPublicListCreation is turned off, we could also hide
the Category pull down in the [new list] pop up, as there is only
Private left as an option.
- Maybe we should move the new list link outside of the tabs?
When OpacAllowPublicListCreation is turned off, but public lists
exist, the link 'new list' will still show on the public list tab,
but a private list will be created.
Galen Charlton [Fri, 21 Feb 2014 20:44:24 +0000 (20:44 +0000)]
bug 10865: (follow-up) allow patrons to make their public lists private when OpacAllowPublicListCreation is off
This patch ensures that patrons continue to have the ability to make
their public lists private for any public lists they control that were
created before the library turned the OpacAllowPublicListCreation
system preference off.
To test:
[1] Ensure OpacAllowPublicListCreation is on.
[2] As a patron, create a public list in the OPAC. Also, create
a private list.
[3] Turn OpacAllowPublicListCreation off.
[4] Back in the OPAC, verify that the public list can be edited
and that there are drop-downs for category and permissions.
Also verify that there is a warning that the patron cannot
change it back if they convert a public list to private.
[5] Edit the private list created in step 2. Verify that the
category and permissions drop-downs are not displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 13 Sep 2013 14:50:27 +0000 (10:50 -0400)]
Bug 10865: Don't show list permissions when adding public lists/sharing lists is not allowed
If patron creation of public lists is disallowed by the
OpacAllowPublicListCreation system preference the "category" option
should be hidden altogether instead of showing a <select> with "private"
as the only option. This patch hides category and permissions controls
when OpacAllowPublicListCreation is set to "don't allow."
To test you must have the virtualshelves system preference enabled.
Apply the patch and log into the OPAC. Test:
- With OpacAllowPublicListCreation enabled, create a new list. You
should see options for setting category and permissions. Saving the
new list should complete correctly and save the right settings.
- With OpacAllowPublicListCreation enabled, edit an existing list. You
should see the same options and saving your changes should work
correctly.
- With OpacAllowPublicListCreation disabled, create a new list. You
should only see fields for title and sort. Saving this list should
complete correctly and save the right settings.
- With OpacAllowPublicListCreation disabled, edit an existing list. You
should be able to edit only title and sort settings. Saving your
changes should work correctly.
Repeat your tests for both prog and bootstrap themes.
Revision: Existing public lists can be edited and retain their public
status even if OpacAllowPublicListCreation has since been disabled. This
preserves the behavior previous to this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch fixes a big ergonomic issue.
Note: to me, the "New list" action should be outside the tabs.
It is confusing to have a "new list" into the public lists tab when it
is not possible to create new public lists.
Owen Leonard [Wed, 9 Apr 2014 13:08:27 +0000 (09:08 -0400)]
Bug 12056: fix untranslatable strings in calendar
In the calendar there are some strings in a JavaScript function which
are not properly wrapped in a function for translation. This patch
corrects this.
This patch also corrects some minor validation issues and spelling and
grammar issues, including those covered by Bug 12055.
To test, apply the patch and view the calendar in Tools -> Calendar.
When you hover your mouse over a day in the calendar you should see a
title tooltip indicating what kind of day/holiday it is and showing the
title of the holiday, if any.
To test that the strings are now being picked up for translation,
run translate update on a po file and confirm that the affected strings
are now present: "Weekly holiday," "Yearly holiday," etc.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well. New strings on translation file. No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Mark Tompsett [Wed, 9 Apr 2014 18:34:21 +0000 (14:34 -0400)]
Bug 12060: remove extraneous tags from header.inc
By correcting the indentation, it became more apparent the two
markup errors (stray </li> and </div> tags) that were generated
by pasting the page source of
PROTOCOL://STAFFCLIENT/cgi-bin/koha/tools/holidays.pl
into http://validator.w3.org/check
TEST PLAN
---------
1) Home -> Tools -> Calendar in the staff client
2) In another tab open http://validator.w3.org/check
3) Select Validate by Direct Input
4) In the staff client, view the page source
5) Copy the page source to the Validation text box in the
other tab.
6) Click the 'Check' button.
-- There will be 3 errors.
7) Apply the patch.
8) Refresh the staff client page.
9) Copy the revised page source into the validation text box.
10) click the 'Check' button.
-- There will be 1 error.
11) Run the koha qa test tool.
NOTE: This error is not in the intended file to fix. Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
git diff --color -w HEAD^ reveals, that only a </li> and a </div>
are removed by this patch, all other changes are whitespace.
Passes all tests and QA script.
Owen Leonard [Mon, 10 Feb 2014 17:26:34 +0000 (12:26 -0500)]
Bug 11734 - Use new DataTables include in batch modification templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
batch modification and batch deletion pages.
Minor text changes: Corrected capitalization.
Apply the patch and test the following:
- On batch modification and batch deletion, submit multiple barcodes or
item numbers. On the results page the title column has been configured
to use the "anti-the" filter to exclude articles from sorting. Sorting
on all columns should work correctly.
Edit: Put back checkboxes plugin which was accidentally removed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Owen Leonard [Fri, 7 Feb 2014 19:06:50 +0000 (14:06 -0500)]
Bug 11711 - Use new DataTables include in circ templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Circulation
- The UseTablesortForCirc system preference must be enabled.
- Check out to a patron with existing checkouts. Choose a patron who
is a guarantor to another patron with checkouts in order to test the
relatives' checkouts table.
- The checkouts and relatives' checkouts tables have been modified to
exclude articles when sorting of titles.
- Hold ratios - The title column has been configured to exclude articles
from sorting
- Transfer to receive
- Holds queue
- The title column has been configured to exclude articles when
sorting
- The date column has been modified to use the title-string filter for
sorting. An unformatted date is now passed from C4::HoldsQueue.pm to
the template, where the KohaDates filter is used for formatting.
Sorting is based on the unformatted date.
- Holds awaiting pickup
- The "available since" column has been configured for sorting on an
unformatted date. waitingreserves.pl now passes the unformatted
date to the template, and formatting is done using the KohaDates
filter.
- The title column has been configured to exclude articles when
sorting.
Edit: Rebased on current master following commit of Bug 11605 Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 27 Feb 2014 08:12:25 +0000 (09:12 +0100)]
Bug 11855: Tiny code cleanup in members
[1] Template variable actionname is not used in the associated
template. This could be a copy-paste from serials/member-search.pl.
Consequently, the module is no longer needed in member.pl. Template
members/search.tt still contains actionname; it seems that this
emplate is not used too.
[2] $template_name not used in members-home.pl.
Test plan:
[1] Go to Patrons. If you reach that page, you tested members-home.pl
[2] Add a new patron.
[3] Search for a patron. Edit one.
Followed test plan. No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jesse Weaver [Thu, 20 Mar 2014 17:20:40 +0000 (11:20 -0600)]
Bug 11978 - Fix URLs displayed in OverDrive search
OverDrive has recently changed its APIs to include "http://" in the URLs
it returns. This patch removes the "http://" on the Koha end so they
aren't doubled.
Test plan:
1. Run an OverDrive search on the OPAC.
2. Check the links, they should start with "http://http://"
3. Apply this patch.
4. Rerun the search, the links should now be correct.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I can reproduce the problem and confirm that this patch fixes it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch removes hardcoded http:// from URLs in the Overdrive code.
Trusting Jesse and Owen to have tested this with Overdrive,
code review reveals no additional changes or possible problems.
Bug 9075: Rename "type" to "material type" on OPAC XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) In the staff client, set the OPAC system preference
OPACXSLTDetailsDisplay to 'default' and save.
2) In the staff client, set the OPAC system preference
OPACXSLTResultsDisplay to 'default' and save.
3) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
4) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
6) Look at the biblio details
-- It should also display "Type:"
7) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
8) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
9) Look at the biblio details
-- It should also display "Type:"
10) Apply the patch
11) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
12) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
13) Look at the biblio details
-- It should display "Material type:" this time.
14) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
15) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
16) Look at the biblio details
-- It should display "Material type:" this time.
17) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: Just a simple string change. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, works as advertised in staff, prog and bootstrap
OPAC.
Bug 9075: Rename "type" to "material type" on staff XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) Set the Staff system preference XSLTDetailsDisplay to
'default' and save.
2) Set the Staff system preference XSLTResultsDisplay to
'default' and save.
3) Click 'Search the catalog' tab in the search area.
4) Search for something
5) Look for a biblio that has 942$c set to some type.
-- It should display "Type:"
Or take a result and modify it to have a 942$c.
6) Look at the biblio details
-- It should also display "Type:"
7) Apply the patch
8) Search for the same biblio again.
-- It should display "Material type:" this time.
9) Look at the biblio details
-- It should display "Material type:" this time.
10) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: This is a simple string substitution. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7413: (follow-up) tweak description of the AllowRenewalLimitOverride syspref
As it happens, the AllowRenewalLimitOverride serves to both allow
operators to override renewal blocks when the renewal exceed the
maximum renewal count or when the renewal is premature. This
patch adjust the wording to reflect the expansion in meaning; if
it turns out that folks want to distinguish between overriding the
maximum renewal count and overriding premature renewals, a new
system preference can be added later.
Bug 7413: (follow-up) teach renew interface about too_soon
This patch ensures that the new staff interface for renewals
recognizes when premature renewals are requested. If the
AllowRenewalLimitOverride system preference is enabled, staff members
are able to override the block:
To test:
[1] Set up a loan policy with a "no renewal before" value and
check out an item.
[2] In the renewal page, verify that attempting to renew the loan
results in an error forbidding the renew.
[3] If AllowRenewalLimitOverride is enabled, the operator should
also be given the option to override the block.
Bug 7413: (follow-up) improve return of GetSoonestRenewDate()
This patch modifies GetSoonestRenewDate() so that it returns
undef if the patron, item, or loan cannot be found. This
better reflects the usage of this routine GetSoonestRenewDate(),
as none of its callers tried to check the second return
value containing an error code.
This patch ensures both both '0' and strings consisting of zero
or more blanks are recognized by the circ rules editor as specifying
clearing the "no renewal before" value. Concretely, this fixes
warnings of the following form when clearing this field:
Holger Meißner [Fri, 14 Feb 2014 09:01:19 +0000 (10:01 +0100)]
Bug 7413: Unit test
This patch makes the new parameter norenewalbefore known to
unit test Circulation_Issuingrule.t.
To test:
1) Before applying the patch:
prove t/db_dependent/Circulation_Issuingrule.t
2) Notice that the test fails with:
$got->{norenewalbefore} = undef
$expected->{norenewalbefore} = Does not exist
3) Apply the patch.
4) Run test again and it should pass.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Fri, 14 Feb 2014 08:11:19 +0000 (09:11 +0100)]
Bug 7413: OPAC bootstrap theme changes
This patch makes opac-user.pl and the bootstrap version of opac-user.tt
handle the new renewal error "too_soon".
To test:
1) Set global syspref "opacthemes" to bootstrap.
2) Set global syspref "OpacRenewalAllowed" to Allow.
3) Test the same things as in previous patch, this time for the OPAC
summary page.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Thu, 13 Feb 2014 16:05:08 +0000 (17:05 +0100)]
Bug 7413: Code and intranet template changes
This patch modifies CanBookBeRenewed, so that based on
issuingrules.norenewalbefore a new error "too_soon" can be returned.
Also adds a new subroutine GetSoonestRenewDate.
To test:
1) Create an issuing rule with "No renewal before" set to value X
and "Unit" set to days.
2) Test the following steps for both:
Home > Patron > Patron details
Home > Circulation > Checkouts
3) On the checkout page, test for today's issues as well as previous
issues. (Check something out on one day and something else on the
next day, then do the testing.)
4) Confirm that items can't be renewed if current date is more than
X days before due date.
5) Confirm that the date and time of the soonest possible renewal are
displayed in the format specified by global sysprefs "dateformat"
and "TimeFormat".
6) Confirm that items can be renewed if "No renewal before" is
undefined or current date is X or less days before due date.
7) Confirm that if the number of allowed renewals is exceeded
"Not renewable" is displayed, no matter what "No renewal before"
is set to.
8) Test the same things with "Unit" set to hours.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Wed, 12 Feb 2014 16:16:40 +0000 (17:16 +0100)]
Bug 7413: Add "No renewal before" to the circulation and fine rules
This patch adds a column "No renewal before" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that an empty entry, zero and non-numerical values for
"No renewal before" are saved as undefined.
3) Confirm that numerical values can be entered and saved.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Wed, 12 Feb 2014 15:53:06 +0000 (16:53 +0100)]
Bug 7413: Add issuingrules.norenewalbefore to database
Currently multiple renewals can be done in immediate succsession.
To optionally prevent this, a new parameter "No renewal before"
is introduced.
This patch adds issuingrules.norenewalbefore to the database.
Default value is NULL.
To test:
1) Run installer/data/mysql/updatedatabase.pl
2) Create a SQL report like:
SELECT * FROM issuingrules
3) Confirm that norenewalbefore was added after renewalperiod.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 7567: (follow-up) make tests of get_opac_new more readable
This patch updates two of the tests cases to directly compare
the results returned by get_opac_new with the expected value
by using is_deeply(). Consequently, it removes the use of magic
numbers (which do not stop being magic numbers if they're wrapped
in constants named F1, F2, etc.).
To test:
[1] Verify that prove -v t/db_dependent/NewsChannels.t passes.
This follow-up corrects a JavaScript error by converting the sorting
configuration to be class-based
(http://wiki.koha-community.org/wiki/DataTables_HowTo#Sorting_dates_regardless_of_date_format_preference).
I have also changed the DataTables configuration to allow for pagination
and JS-based filtering.
To test, apply the patch and view the list of News items. Your browser
should report no JavaScript errors. Table sorting, pagination, and
filtering should work correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Fri, 20 Dec 2013 03:59:28 +0000 (22:59 -0500)]
Bug 7567 - Use, display, filter News by library
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Mon, 17 Feb 2014 03:40:28 +0000 (22:40 -0500)]
Bug 7567 - Schema update for opac_news
This was generated by:
Reset hard to master.
Restore old DB
Apply the patches for 7567
./installer/data/mysql/updatedatabase.pl
./misc/devel/update_dbix_class_files.pl -db_name=... -db_user=... -db_passwd=...
git add Koha/Schema/Results/OpacNews.pm
This should provide the necessary changes to the schema files for
Koha 3.16 and forward.
Had to generate under Debian, because Ubuntu's was broken by comparison.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Thu, 19 Dec 2013 22:51:34 +0000 (17:51 -0500)]
Bug 7567 - Added branchcode to opac_news
This patch merely adds branchcode varchar(10) DEFAULT NULL to
the opac_news table.
TEST PLAN
---------
1) backup your kohadata base if you care about the data.
2) use the koha database
3) describe opac_news;
4) show create table opac_news;
-- No branchcode constraint will exist.
5) apply the patch
6) upgrade the database (either staff client or script)
7) use the koha database
8) describe opac_news;
9) show create table opac_news;
-- The branchcode constraint should be listed.
10) drop that koha database
11) create the koha database
12) use the koha database
13) source ~/kohaclone/installer/data/mysql/kohastructure.sql
-- there should be no errors in creating the database.
14) describe opac_news;
15) show create table opac_news;
-- The branchcode constraint should be listed.
16) restore your koha database if you backed it up.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Mon, 16 Dec 2013 05:41:47 +0000 (00:41 -0500)]
Bug 7567: convert news add/update routines to take hashref; fix bugs
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Mon, 16 Dec 2013 03:33:32 +0000 (22:33 -0500)]
Bug 7567: (code cleanup) remove finish calls
"When all the data has been fetched from a SELECT statement,
the driver will automatically call finish for you. So you should
not call it explicitly except when you know that you've not
fetched all the data from a statement handle and the handle
won't be destroyed soon."
(http://search.cpan.org/~timb/DBI-1.627/DBI.pm#finish)
All the $sth variables were scoped within the functions,
and would be destroyed immediately. Additionally, there was
one after a SELECT, for only a single idnew, and so it was
not necessary.
TEST PLAN
---------
1) prove -v t/db_dependent/NewsChannels.t
2) apply patch
3) prove -v t/db_dependent/NewsChannels.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
ok 1 - use C4::NewsChannels;
ok 2 - Successfully added the first dummy news item!
ok 3 - Successfully added the second dummy news item!
ok 4 - Successfully updated second dummy news item!
ok 5 - Successfully tested get_opac_new id1!
ok 6 - Successfully tested get_opac_new id2!
ok 7 - Successfully tested get_opac_news!
ok 8 - Successfully tested GetNewsToDisplay!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Sat, 14 Dec 2013 03:12:37 +0000 (22:12 -0500)]
Bug 7567 - Correct Filtering and Default dropdown values
In the staff client, when you went to Home -> Tools -> News
the default 'Display location' is 'All'. Everything is correctly
displayed. However, if you change the filter it filters the
table correctly, but does not set the dropdown value to match.
This patch corrects this.
TEST PLAN
---------
1) Home -> Tools -> News
2) Change 'Display location' value and click 'Filter'.
- Is the 'Display location' value the same now?
(no)
- Are the correct values displayed?
3) Click 'New entry'
- Is it anything other than 'All'?
(no, and is this correct?)
4) Click 'Cancel'
5) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(no)
6) Apply patch
7) Change the 'Display location' value and click 'Filter'.
- Does the 'Display location' value stay the same?
(this should be correct now)
- Are the correct values displayed?
8) Change the 'Display location' value to 'All' and click 'Filter'.
- Does everything display?
9) Change the 'Display location' value and click 'Filter'.
10) Click 'New entry'
- Does it match what the filter was?
(should match now)
11) Click 'Cancel'
12) Click 'Edit' for various news items with different locations.
- Does the 'Display location' get proper set?
(this should be correct now)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Fri, 13 Dec 2013 20:51:36 +0000 (15:51 -0500)]
Bug 7567 - Clean up sample news files
Some files had truncate. Some files had foreign key checks.
Other files had foreign key checks disabled. Some files gave
the column names expressly, and others assumed the fields in
a particular order. Everything was modified to:
- not truncate
- not say utf8 (because it should already be by default)
- not disable foreign key checks (because it should work)
- expressly name the fields (adding fields shouldn't break it)
TEST PLAN
---------
0) Backup opac_news if you care about your news.
1) open mysql client
2) use the koha database
3) Run the following script
TRUNCATE opac_news;
source ~/kohaclone/installer/data/mysql/uk-UA/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/it-IT/necessari/sample_news.sql
source ~/kohaclone/installer/data/mysql/de-DE/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/sample_news.sql
source ~/kohaclone/installer/data/mysql/en/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/pl-PL/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/es-ES/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/ru-RU/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/fr-FR/2-Optionel/sample_news.sql
- Were there errors?
- Did everything add nicely?
- Not likely, by expressly stating the idnew field, the news
items in some files would not be added.
4) apply patch
5) try running the script again
- Were there errors?
- Did everything add nicely?
6) Log into the staff client
7) Tools->News
- Do you see the news items added?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much needed clean up, making for much more robust and less error prone
sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Fri, 13 Dec 2013 19:49:56 +0000 (14:49 -0500)]
Bug 7567: (code cleanup) update license and use Modern::Perl
Grabbed the current license from
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
and changed the use strict; use warnings; into a
use Modern::Perl instead.
TEST PLAN
---------
1) Log into staff client.
- Does news look okay?
2) Apply patch
3) Refresh staff client.
- Does news look the same?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Safe no op action
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Fri, 13 Dec 2013 04:19:18 +0000 (23:19 -0500)]
Bug 7567: add tests for C4::NewsChannel
Testing was lacking, this tests every function call. As a
side effect, this moved the stub of a test file from
t/NewsChannels.t to t/db_dependent/NewsChannels.t, since the
table opac_news must exist.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passes all 8 tests
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10790: fix misalignment in item type form when noItemTypeImages is off
This patch fixes the odd behavior when noItemTypesImages is set
to 'Don't show'. Just a misplaced </div>
To test:
1) Set syspref noItemTypeImages to 'Don't show'
2) Go to Admininstration > Item types
3) Edit some item type, you will view a display
similar to the attached image
4) Apply the patch
5) Reload the page, now the display is fixed
6) Change syspref to 'Show' to check that
the display is also good
Also fixed a missing '/' on a closing select
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 15 Jan 2014 19:51:11 +0000 (14:51 -0500)]
Bug 11570 - Upgrade jQueryUI to latest version in the staff client
This patch upgrades the version of jQueryUI included in the Koha staff
client from v1.8.23 to v.1.10.4. The upgrade introduces a few minor API
changes which require the updates in this patch:
- In CSS, the term "active" is used instead of "selected"
- Autocomplete functions use slightly changed parameters
Changes to the default jQueryUI CSS allows us to remove some instances
of "!important" from jQueryUI-related CSS in the staff client's main CSS
file.
To test:
Testing changes to autocomplete:
- Enable the CircAutocompl system preference. Try searching in the
header's "Check out" tab. Autocomplete should look correct and
function correctly.
- In Circulation -> Overdues: The patron attribute authorized value
filter (must have patron attributes enabled, and a patron attribute
defined which uses authorized values.
- Course reserves -> Course -> Edit: Searching for an instructor
- In the unimarc_field_210c_bis.pl plugin:
1. Link the publisher name field in your MARC structure to
the unimarc_field_210c_bis.pl plugin.
2. Open a MARC record for editing and click the "tag editor" link to
launch the plugin.
3. Type the first few letters of a publisher which exists in your
database. You should get an autocomplete menu of publishers
which match your search.
4. Select one and click the "choose" button to fill the field in the
MARC editor.
- Tools -> Patron lists: Add a list or choose an existing list and add
patrons. Perform a search for a patron.
- Placing a hold: After choose a title and clicking "Place hold,"
search for a patron.
- Tags management: The sidebar filter for "reviewer" should let you
search by patron name.
Other jQueryUI widget changes:
- Check tabs appearance in header search, biblio detail, cataloging, and
circulation patron fines pages.
To confirm other jQueryUI widgets still function correctly:
- Check accordion (collapsing sections) in Patrons -> Patrons requesting
modifications and the MARC subfield structure edit screen.
- Check datepickers, especially in Circulation with the added timepicker.
Test a linked datepicker, for example in Reports -> Stats wizards ->
Circulation where the value in one date field affects what dates are
available in the matching field.
- Check the calendar interface in Tools -> Calendar
To confirm that the new jQueryUI default CSS is more flexible (fixing
Bug 11042), add the following CSS to your IntranetUserCSS system
preference and confirm that the header search active tab border color
changes (hash mark escaped so that it will appear in commit msg):
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11850: Add -append option to bulkmarcimport.pl to append to logfile
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Keeps current behaviour as default.
The -append option is described in the POD and works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Adding a date/time to the output might
be good, to make it easier to find the entry you were looking for.
Pasi Kallinen [Wed, 2 Apr 2014 11:30:03 +0000 (14:30 +0300)]
Bug 12024: fix add to list opening the list adding UI in two windows
In Item details, when using the menu toolbar for Add To > List,
the list adding UI opens in a popup window, and also in the original
window. The original window should stay showing the item details page.
This patch corrects this behavior, which has been observed in Chromium
on Ubuntu and Chrome on Windows.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works fixing problem. No koha-qa errors.
Test:
1. On staff, go to detail of some biblio,
click add to List, described behavior
2. With patch applied, original windows stay on item detail
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch passes all tests and QA script, works as described.
Bug 10818: improve display and translatability of sysprefs OAI-PMH:ConfFile's description
This patch correct english display for OAI-PMH:ConfFile syspref,
and makes it's strings translatable
To test:
1) On Administration > System preferences > Web Services
OAI-PMH:ConfFile syspref doesn't have description before
file box. Text after that box is not translated.
2) Choose your prefered language, xx-YY, update po files
cd misc/translator
perl translate update xx-YY
3) Look into xx-YY-pref.po for any occurence of "YAML", there is none
4) Apply the patch
5) Update po files again
6) Look into xx-YY-pref.po, now there are 2 entries
7) Also reload page from 1) and check for text before
file box.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works for me as described, only changes YAML pref file.
Owen Leonard [Thu, 3 Apr 2014 12:38:08 +0000 (08:38 -0400)]
Bug 12034: standardize alerts referring to lists and list items
The staff client lists template contains a warning which differs from
the same warning in the OPAC. The OPAC version is correct because it
refers to a list rather than a shelf. This patch copies the OPAC version
to the staff client template.
This patch also corrects a few of other instances where the incorrect
term "shelf" is used.
To test, apply the patch and view a list in the staff client which is
populated with items. Check the box next to one or more items on the
list and click the "Remove selected" button. You should see the message,
"Are you sure you want to remove these items from the list?"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11393: fix display of Thai in language menu when Thai translation is installed
The problem is with the name of PO files
Currently Koha expect, among other variants, that PO filenames
began with (using as example *-pref.po):
{lang}-pref.po
{lang}-{region}-pref.po
{lang}-{script}-pref.po
{lang}-{script}-{region}-pref.po
and expect 2 chars for lang and region, and 4 for script
So the problem with Thai translation files are that it's names
do not match that convention.
This patch only rename Thai files as th-THA-* to th-TH-*.
In that way language description is right.
translate script use that chars to make dirs, and use dirs to find
description.
To test:
1) Go to I18N/L10N sysprefs
2) Install th-THA language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-THA)
3) Reload page, wrong description
4) Apply patch
5) Install th-TH language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-TH)
6) Reload page, right description
7) If you want do "mkdir koha-tmpl/intranet-tmpl/prog/th-Thai", reload,
also right description
To the reporter of this Bug: the rename of the folder is a good
workaround, when this patch is pushed to stable I'll rename Thai
files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
This does not correct existing problems which need human
intervention. It does, however, allow for a correct installation
of Thai after the patch is made.
If we really want a patch for fixing an existing install. I
wrote it, but have not tested it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As pointed out by Mark, this does not fix existing installations.
Putting a note in the release notes might be something we can do here.
projects / koha.git / log