Jonathan Druart [Fri, 19 Feb 2016 16:13:50 +0000 (16:13 +0000)]
Bug 15863: Show/hide date range selection if not needed - dictionnary
When creating a dictionary for a date column, there is a "date range" /
"all dates" radio buttons and 2 inputs to select the date range. These
inputs should be hidden if "all dates" is selected.
Test plan:
1/ Create a new dictionary on reports/dictionary.pl
2/ Select a date column (borrowers.dateofbirth of instance)
3/ On step 4, the start/end of the date range inputs should be
hidden/shown depending of the radio buttons.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 25 Feb 2016 19:41:11 +0000 (14:41 -0500)]
Bug 15918 - Obsolete file datatables-strings.inc can be removed
The include file datatables-strings.inc is no longer necessary. Its
contents are now in datatables.inc. This patch corrects two references
in comments to datatables-strings.inc (replacing it with datatables.inc)
and removes the obsolete file.
To test, apply the patch and load any page with a DataTables-enabled
table configured to show pagination buttons, e.g. Saved Reports.
Pagination labels like "Next," "Previous," and "Showing X of X..."
should be correct.
Search the codebase to confirm that no references remain for
datatables-strings.inc.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 29 Feb 2016 16:53:14 +0000 (11:53 -0500)]
Bug 15938 - Use validation plugin when adding or editing classification sources and filing rules
In Administration -> Classification sources there is some embedded
JavaScript which checks for empty form values. This patch removes that
JS and adds validation using the globally-included validation plugin
instead.
To test, apply the patch and go to Administration -> Classification
sources.
- Click to add a new classification source and confirm that you cannot
submit the form with empty required values.
- Edit an existing classification source and confirm that you cannot
empty a required field and submit the form.
- Repeat the previous two steps with filing rules.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Tue, 12 Jan 2016 04:17:35 +0000 (15:17 +1100)]
Bug 15555: Index 024$a into Identifier-other:u url register when source $2 is uri
This patch indexes 024$a into the "phrase" index type, and the "url" index type,
if the 024$2 equals "uri".
TEST PLAN
1) Apply the patch.
1b) If you're using a gitified Koha or a git install,
you'll need to upgrade your instance or copy your zebradb files
over to /etc/koha/zebradb or your "kohadev" directory.
2) Add a 024$a with a URL like http://libris.kb.se/resource/bib/219553
to a bibliographic record
3) Re-index Zebra
4) Type "id-other,st-urx,fuzzy=http://libris.kb.se/resource/bib/219553"
into the "Search the catalog" box in the Staff Client and search
5) Note that you retrieve your record
NOTE: The fuzzy is required because Koha's query "parsing" functions change
http:// to http=// which won't correctly match the value in the "Identifier-other:u" index.
NOTE: Alternatively, you could do the following search instead:
"id-other,phr=http libris kb se resource bib 219553".
It would work as well by using the "Identifier-other:p" index.
Advanced tester version:
4) In a terminal window, find the "koha-conf.xml" file in your "etc" directory.
5) Open "koha-conf.xml" and find <listen id="biblioserver">.
Copy the URI you find there. (e.g. unix:/home/dcook/koha-dev/var/run/zebradb/bibliosocket).
6) Type "yaz-client unix:/home/dcook/koha-dev/var/run/zebradb/bibliosocket"
7) After it connects, type "base biblios" and press enter
8) Type "format xml" and press enter
9) Type "elements zebra::index" and press enter
10) Type "f id-other,st-urx=http://libris.kb.se/resource/bib/219553" and press enter
11) Note that you should have at least one result
12) Type "show 1"
13) If you scroll through the results, you should find something like the following:
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised the record is retrieved
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Some of the statements in the commit message do not work for me.
A search like "id-other,phr=http libris kb se resource bib 219553" does not
have results. Searching for "id-other,phr=libris.kb.se resource" does.
The steps in the advanced tester version do not work for me too.
I verified the following in yaz-client:
[1] Z> f @attr 1=9012 @attr 4=104 http://libris.kb.se/resource/bib/219553
Sent searchRequest.
Received SearchResponse.
Search was a success.
Number of hits: 1, setno 16
[2] First removed $2 and reindexed. Then searched again:
Z> f @attr 1=9012 @attr 4=104 http://libris.kb.se/resource/bib/219553
Sent searchRequest.
Received SearchResponse.
Search was a success.
Number of hits: 0, setno 1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 11 Jan 2016 23:07:33 +0000 (16:07 -0700)]
Bug 15531: (QA followup) Fix several small issues
* Add `AFTER` to DB update
* Change "Is standing order basket:" to "Orders are standing:"
* Disable item creation when adding from a staged file
* Correctly show is_standing for existing baskets
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 11 Jan 2016 23:07:33 +0000 (16:07 -0700)]
Bug 15531: Add support for standing orders
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15303 Followup: If install LE dependencies from backports on Jessie
On Debian Jessie, apt needs to be told it should get the dependencies
for the LE package from backports, or it will error. We check if we are
on Jessie and do that automatically so users don't need to set priorities
manually in apt.
Changed to lsb_release -c -s.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Sat, 16 Jan 2016 23:15:30 +0000 (00:15 +0100)]
Bug 15303 LE production server
Deletes the --staging option of the letsencrypt command to get
real certificates. Rate limits apply.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Fri, 4 Dec 2015 00:11:17 +0000 (01:11 +0100)]
Bug 15303 Letsencrypt option for Debian package installations
New option koha-create --letsencrypt
- installs the letsencrypt package if needed
- creates <instance>
- generates letsencrypt certificates for <instance>
- sets up a https-only website for <instance>
- redirects http to https for <instance>
! you need to enable jessie backports to install letsencrypt: add
deb http://http.debian.net/debian jessie-backports main contrib non-free
to your /etc/apt/sources.list
! this patch uses the letsencrypt staging server
to create real certificates, apply thy "LE production server" patch
Test plan:
- build a debian package with patch applied
- use apache mod_ssl
sudo a2enmod ssl
- make sure the machine is accessible on 80 (needed for letsencrypt) and 443 from the internet
- install koha with your new package
- Put your (existing) domain options in /etc/koha/koha-sites.conf
- use koha-create with the new options:
sudo koha-create --create-db --letsencrypt <instance>
- if you do not have the letsencrypt package installed, you will be prompted to do that
[
if there is no package available, a symlink to the git checkout will work:
on your test server, get letsencrypt via git
git clone https://github.com/letsencrypt/letsencrypt
create a symlink from /usr/bin/letsencrypt to letsencrypt-auto
sudo ln -s /path/to/letsencrypt/letsencrypt-auto /usr/bin/letsencrypt
]
- wait until setup is finished, check that you got a working OPAC and staff client with certificates
- check that http redirects to https
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 18 Apr 2016 09:37:18 +0000 (10:37 +0100)]
Bug 15009: QA follow-up
This patch adds a test to check the unicity of auth cats, simplify
the GetBudgetAuthCats subroutine and make it return an arrayref of scalar
instead of an arrayref of hashref with only 1 key.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
charles [Fri, 25 Mar 2016 21:09:24 +0000 (17:09 -0400)]
Bug 15009 - Adds unit tests for C4::Budget::GetBudgetAuthCats
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Blou [Tue, 13 Oct 2015 20:12:49 +0000 (16:12 -0400)]
Bug 15009 - Planning dropdown button in aqbudget can have empty line
When displaying a budget, the Planning button in the admin toolbar displays
Plan by months
Plan by libraries
Plan by item types
Plan by
The last one is empty, due to C4::Budgets::GetBudgetAuthCats returning an empty field if the budget has no sort defined.
This prevents returning an array with empty element(s)
TEST:
1) Admin -> Budgets
2) Select a budget
a) you must have '' (empty) in your aqbudgets.sort1_authcat field.
b) edit the budget (direct DB or interface) to get that.
3) Click on Planning dropdown, see the "Plan by <nothing> " entry.
4) apply the patch, revalidate.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more empty option
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug #14377 Show "BIBNO - Suppressed in OPAC" for records with 942$n=1.
Includes class="suppressed_opac" for library specific styles.
Suggested css: .suppressed_opac { color:red; font-size:1.25em; font-weight:bold; float:right; margin-right:2em; clear:none; }
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 5 Apr 2016 15:52:22 +0000 (11:52 -0400)]
Bug 14305: RSS message correction follow-up
If a user is not logged in but requests a specific branch,
the RSS feed message fails to mention the branch.
TEST PLAN
---------
1) Apply first patch
2) go to OPAC's opac-main.pl?branch={some branch with specific news}
-- notice bad RSS message
3) Apply this patch
4) Repeat step 2
-- notice branch is properly shown.
5) koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Persson [Wed, 5 Aug 2015 14:16:50 +0000 (16:16 +0200)]
Bug 14305: View arbitrary branch's news
This patch adds an input named 'branch' to opac-main.pl that
allows overriding the home library to view news from any branch.
This is part of the 'Use Koha as a CMS' development.
To reviewers: Does this create any security implications?
The column is text; it is possbile to push SQL
statemens into the DB via the opac-membership.pl
page, but all the code there seems to use DBIx::Class
and prepared statements. When attemped, accepting the
changes were rejected because of the foreign key
constraint placed on the main borrowers table.
It is recommended to use this patch in conjunction with 11584
which adds a WYSIWYG editor to System Preferences.
Test plan:
* Make sure your Koha installation has multiple branches:
* Log in to the Staff interface and select 'Koha administration'
* Select 'Libraries and groups', the first item in the list
* Add an extra branch named 'BRANCH1':
* Press the 'New library' button
* Set 'Library code' to 'BRANCH1'
* Enter an arbitrary name
* Press 'Submit'
* Add at least two news items with different branches:
* Log in to the Staff interface and select 'Tools'
* Under 'Additional tools' select 'News'
* On the 'Koha news' page, create a news item for all libraries:
* Press the 'New entry' button
* Set 'Library' to 'All libraries' and enter a title.
* Press 'Submit'
* On the 'Koha news' page, create a news item for one library:
* Press the 'New entry' button
* Set 'Library' to 'BRANCH1' and enter a title
* Press 'Submit'
* Add links to OPAC to select branch:
* Select 'System preferences' and then the 'OPAC' tab
* Scroll down to the 'OpacNav' preference and click 'Click to Edit'
* Create two hyperlinks with a parameter named 'branch':
* '<a href="?branch=BRANCH1">BRANCH1</a>'
* '<a href="?branch=">none</a>'
* Click 'Save all OPAC preferences'
* Test OPAC:
* By default, global news and news for home branch should show.
* When clicking the 'BRANCH1' link, you should see global news
plus news for the BRANCH1 branch.
* When the parameter 'branch' is set but has no value,
news from the home branch should be shown.
Issues: Tricky to create a link to the same page
which removes existing paramters.
The user normally has a home branch set.
We can override it with the parameter.
If undefined, the home branch should be shown.
Sponsored-by: Halland County Library
http://bugs.koha-community.org/show_bug.cgi?id=14305
Changed 2015-12-14: Whitespace fix
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Persson [Tue, 18 Aug 2015 21:03:54 +0000 (23:03 +0200)]
Bug 14305: View arbitrary branch's news, RSS fix
This fix changes the RSS link to reflect the URL paramter override.
This is less elegant than the existing solution which uses the
Branches TT module, perhaps there is a better way?
Sponsored-By: Halland County Library
Test plan:
* Follow instructions in the original patch but also check the
URLs and contents of the RSS link at the bottom the OPAC page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 4 Apr 2016 22:59:33 +0000 (18:59 -0400)]
Bug 14144: Clean ups and refactors
perltidy
old new calls to new call format
attrType -> attr_type (perlcritic friendlier)
double quotes to single quotes
'' combinations to q{} (perlcritic friendlier)
refactored parameters to mock_net_ldap_search into a HASH
This piece is not necessary, but I think it is nicer.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected. No koha-qa erros
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Revisiting this bug, I noticed that C4::Context->config() was mocked
poorly. I expanded the mock function a little and have quieted the
test which seemed to be working in a broken manner before.
TEST PLAN
---------
1) prove t/db_dependend/Auth_with_ldap.t
-- shibboleth noise
2) apply this patch
3) prove t/db_dependend/Auth_with_ldap.t
-- no noise
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 25 Apr 2016 13:02:36 +0000 (15:02 +0200)]
Bug 14050: Default framework for authorities should not be deletable
To test:
- Apply patch
- In staff client, go to Home > Administration > Authority types
- Verify that the Actions for the Default type do not contain the delete
action
- Verify that other types have a delete action
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Delete action was eliminated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bouzid Fergani [Thu, 5 Mar 2015 15:56:14 +0000 (10:56 -0500)]
Bug 11371 - Add a new report : Orders by fund with more options
Add option show or no inactive budget and more options
Use subroutine GetBudgetHierarchy for return all budgets
Delete subroutine GetBudgetPeriodDescription and theire tests
Use Price TT plugin
Correct name of column and capitalization the first letter
Add checkbox for show inactive budgets, default the drop down list containt a active budget
Not use [i] for inactive budgets, i add (inactive) at the end of inactive budget
Add vendor note in the list of show attribute
Test case:
Go to Home > Reports > Orders by fund
Select one or all budgets
You can show the inactive budget, default the drop down list containt a active budget
Choose output to screen ou csv file
Works as expected. QA tools OK with Bug 16104 applied. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed 'Fund (budget):' back to 'Fund:', as the budget
no longer shows in the pull down.
- Fixed number of tests in Budgets.t
- Removed &GetBudgetPeriodDescription
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 6 Apr 2016 14:54:48 +0000 (10:54 -0400)]
Bug 9387 - Feedback message for FAILED check out items are not obvious for visually impaired
This patch adds a heading to the error dialg displayed when a barcode
has been submitted for checkout which doesn't exist. This patch also
modifies the markup of the error dialog in order to make error a little
more clear to sighted users.
To test, apply the patch and submit a barcode for checkout which does
not exist. The resulting error dialog should have a heading, "Barcode
not found."
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 6 Jul 2015 13:43:34 +0000 (09:43 -0400)]
Bug 14497 - Add warning to patron details page if patron's fines exceed noissuescharge
Some librarians have requested that the same warning on the check out
page be placed on the patron details page if a patron's fines exceed the
system preference noissuescharge.
Test Plan:
1) Apply this patch
2) Find or create a patron who's fines exceed noissuescharge
3) Browse to that patron's details ( moremember.pl )
4) You should see a warning near the top of the page with links to the
patron's account page and the pay fines page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Patch ammended post sign-off
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 22 Mar 2016 13:04:25 +0000 (09:04 -0400)]
Bug 11565 [QA Followup] - Hide checkout options when not in use
This follow-up reformats the checkout screen so that checkout settings
like specify due date, on-site checkout, and override high holds are
grouped in a panel which is hidden by default. Clicking a link shows all
the available settings.
Also modified in this patch: The default color for div.hint has been
made a little darker for readability.
To test, apply the patch and clear your browser cache if necessary.
- Check out to a patron who is not blocked from checking out.
- Click the "Checkout settings" link and confirm that the settings panel
is displayed.
- Test that the settings in the panel behave as expected.
- Test with preferences on and off: decreaseLoanHighHolds,
OnSiteCheckouts, SpecifyDueDate.
NOTE: This patch is a work in progress. It does not address the issue of
checkout setting being hidden even if they are active.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Sep 2015 15:48:14 +0000 (11:48 -0400)]
Bug 11565 - decreaseLoanHighHolds needs Override
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 18 Dec 2012 15:55:25 +0000 (10:55 -0500)]
Bug 16283 - Make OPAC registration captcha case insensitive
The OPAC registration captcha should not be case sensitive. This patch
was moved here from bug 9393.
Test Plan:
1) Enable patron self registration
2) Test the captcha by typing in the captcha in lower case. Registration
should still succeed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 11 Feb 2016 01:23:09 +0000 (01:23 +0000)]
Bug 14577 - Allow restriction of checkouts based on fines of guarantor's guarantees
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 18 Dec 2012 19:18:16 +0000 (14:18 -0500)]
Bug 9393 - Add note to circulation.pl if borrower has pending modifications
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
New link "patron modifications" (if there are) on the checkout page.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 5 Nov 2013 16:31:20 +0000 (11:31 -0500)]
Bug 11203 - Datatables in acqusitions do not ignore "stopwords" in titles
Sorting by the "summary" column does not produce the preferred results.
Title beginning with 'a', 'an', or 'the' are sorted using those
articles.
Test plan:
1) Place an order for 2 items with the titles "Alpha" and "The Alpha",
along with some other records with titles starting with something
between 'a' and 't', and 't' and 'z'
2) Sort the "pending orders" table, note the incorrect sorting
3) Receive all the items
4) Sort the "already received" table, note the incorrect sorting
5) Apply the patch
6) Repeat steps 1-4, note the corrected sorting
7) Check acqui/basket.pl for correct sorting
8) Check acqui/invoice.pl for correct sorting
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12333: Acquisitions toolbar and removing Add to basket section at bottom
To test:
1) Go to Acqui -> do a vendor search -> view a basket
2) Confirm that the Add Order to basket section at the bottom is gone.
Confirm the add to basket button in the toolbar still works as
expected
3) Confirm that when you make your browser shorter, the toolbar follows
the page down as you scroll
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11088 [Follow up] - Patron entry page should use floating toolbar like cataloging interface
To test:
1) Go to add a new patron
2) Confirm floating 'Save' button stays fixed at bottom right corner of
the page as you scroll the page up/down
3) Resize the browser window to s smaller size, and see the 'Save'
button stays fixed in place
3) Go to edit an existing patron
4) Repeat Step 2 and 3
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11088: Floating Save div for Patron entry page
To test:
1) Go to add a new patron
2) Confirm floating save div scrolls down page with you and works as
expected
3) Go to edit an existing patron
4) Repeat Step 2
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16263: making authority tags and subfields actions buttons
EDIT: Subfields icon, 'i' to eye
To test:
1) Go to Admin -> Authority types
2) Click the dropdown for one of the frameworks and click MARC structure
3) Confirm the actions subfields, edit and delete all show in the dropdown and work as expected
4) Click subfields
5) Confirm the action delete on this page shows as a font awesome button and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Arslan Farooq <arslanone@gmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Another sign, pretty eye.
No errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 28 Apr 2016 01:44:57 +0000 (21:44 -0400)]
Bug 10171 [Follow-up] Add a header in Advanced Search (staff interface)
This patch re-indents the new include file because it's not often you
get to help a new file come into the world, it should be indented
nicely.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 10171: Add a search box include on advanced search and item search pages
This patch creates a new file: adv-search.inc. This search include has
no catalog search (as it makes no sense to have the catalog search tab
on the advanced search page).
The item search page uses home-search.inc (with catalog search) as the
catalog search is different to the item search.
To test:
1) Go to Search (advanced search)
2) Confirm search header is there with no catalog search tab and works
as expected
3) Go to item search
4) Confirm search header is there with catalog search tab and works as
expected
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested together with follow up patch, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15414: Silencing warns triggered by creating a new layout in patron card creator
This patch assigns $field and $image values in the for loops
To test:
1) Go to Tools -> Patron Card Creator -> New layout
2) Notice warns
3) Apply patch and refresh page
4) Notice warns are gone and page still works as expected
Sponsored-by: Catalyst IT
NOTE: Trivial initialization in a loop issue.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 11 Apr 2016 03:22:11 +0000 (23:22 -0400)]
Bug 16236: Whitespace followup
tab to 4 spaces on line 255, as per koha qa test tool failure
without this patch.
TEST PLAN
---------
1) Apply first patch
2) Run koha qa test tools
-- fails because of a tab
3) Apply this patch
4) Run koha qa test tools
-- passes
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16236: Making authorised values actions buttons
To test:
1) Go to Admin -> Authorised values
2) Select a category
3) Confirm that Edit and Delete shows as buttons under 'Actions' column and work as expected
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16235: Making borrower account actions buttons
EDIT: Fixing some indenting and adding actions class to the cells so the buttons don't wrap
EDIT: Comment 6
EDIT: Moving the buttons into one column
EDIT: Fixing typo and js error
EDIT: removing tabs
To test:
1) Go to a borrower's account page who has paid fines before
a) Confirm column heading is now 'Actions' and covers both Reverse column and Print column
b) Confirm Reverse and Print show as buttons and work as expected
2) Go to a borrower's account page who has never paid fines (or create a new borrower)
a) Create a manual credit (just to put something in their account)
b) Go back to their account page
c) Confirm the Reverse column does not show as the column heading for Print is (since there is only one action in this column and it's written on every button)
d) Confirm Print shows as a button and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Followed test plan. White spaces OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to the Fines account of a borrower (i.e. members/boraccount.pl)
2) Notice 'View link' text is unnecessary and clutters description column
3) Apply patch and refresh page
4) Confirm 'view link' text is gone and the record title is now a link and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Thu, 31 Mar 2016 21:24:21 +0000 (21:24 +0000)]
Bug 16182: Make phone number clickable to call
EDIT: fixing typo, changing sms number from tel: to sms:
To test:
1) Go to a patron detail page
2) Confirm that all available phone numbers can be clicked and allow you to call this number from your device
a) in the top left circ-menu.inc
b) primary/secondary/other/organisation/mobile phone numbers
c) alternate address phone number
d) alternate contact phone number
e) enable the EnhancedMessagingPreferences system preference. check the SMS number under Patron messaging preferences (back on the detail page) is clickable
3) Check to see if there are any phone numbers I have missed.
Sponsored-by: Catalyst IT Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 22 Apr 2016 13:31:10 +0000 (09:31 -0400)]
Bug 16281: [Follow-up] Remove the use of "onclick" from Reports module
This minor follow-up adds a dummy href attribute to the "Return to the
previous page" link so that the link behaves like a link. A
"preventDefault()" is added to the goback() function to keep the "#"
link from triggering a page jump.
To test, apply the patch, create a report with an SQL error and run
it. Confirm that the 'Return to previous page' link works as expected.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16281: Remove the use of 'onclick' from Reports module
EDIT: Removing unnecessary functions
To test:
1) Go to Reports -> Dictionary
a) Attempt to delete a definition. Confirm the Ok and cancel
buttons in confirm dialog work as expected
2) Go to Reports -> Build new
a) On each step of building a report, confirm the back button
works as expected
b) Confirm add column and delete column on step 3 works as
expected
3) Confirm deleting a report from the toolbar triggers confirm dialog
and it works as expected
4) Create a report with an SQL error and run it. Confirm that the
'Return to previous page' link works as expected
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16268: Add confirm message for deleting circ and fines rules
EDIT: Removes unnecessary code and uses confirm message in staff-global.js
To test:
1) Apply 16267
2) Go to Admin -> Circ and fines rules
3) Try clicking on Delete and Unset buttons
4) Confirm a confirm message pops up and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16267: Making circ and fines rules actions buttons
EDIT: Comment 3
To test:
1) Go to Admin -> Circulation and fines rules
2) Fines rules
a) Confirm that buttons Edit, Delete, Save, and Clear all show as font awesome buttons and work as expected
2) Default checkout, hold and return policy
a) Confirm that column heading is now Actions
b) Confirm that actions Save and Unset show as font awesome buttons and work as expected
3) Checkout limit by patron category AND holds policy by item type
a) Confirm that buttons Add and Delete show as font awesome buttons and work as expected (you may need to add a rule to see the Delete button)
4) Confirm that none of the buttons wrap on a narrower browser
Sponsored-by: Catalyst IT Signed-off-by: Arslan Farooq <arslanone@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16363: Add floating toolbar to advanced search
EDIT: Ah yes I was so sure it wasn't mini but couldn't remember what to
use! Thanks for that Owen
To test:
1) Go to advanced search
2) Confirm Save, More Options and Clear fields (notice change from New
search to Clear fields) are in toolbar and work as expected
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16360: Adding 'actions' class to column in tag review so buttons don't wrap
EDIT: Comment 3
Note: the wrapping only happens when all tags have been approved (or all
rejected), i.e. column has a certain width. When testing, ensure all
tags have been approved or rejected and click the opposite
action to see the effect of the bug and the patch.
To test:
1) Go to Tools -> Tags
2) Click Reject for a tag
3) Notice buttons do not wrap
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16359: Changing size of text input fields so filter box doesn't cover parts of page
To test:
1) Go to Reports -> Saved reports
2) Notice how Filter covers parts of page
3) Apply patch and refresh page
4) Notice how Filter does not cover anything anymore
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I couldn't see the problem in Firefox, but it is a problem in Chrome.
The fix works fine for both.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
EDIT: Added 'validated' class to form and removed 'Required' span (became unnecessary)
To test:
1) Go to Acqui -> Do a vendor search
2) Receive a shipment
3) Attempt to click 'Next' without specifying invoice number. Notice error.
4) Go back to vendor search then apply patch. Click Receive shipment
5) Notice you cannot click 'Next' until you put something in invoice number.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> Item types
2) Confirm Edit and Delete show as font awesome buttons and work as expected
3) Confirm the buttons do not wrap with a narrower browser
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 8 Apr 2016 12:37:46 +0000 (13:37 +0100)]
Bug 16221: follow-up for changes made by bug 16229
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Thu, 7 Apr 2016 08:26:31 +0000 (10:26 +0200)]
Bug 16221: Use Storable::dclone() instead of Clone::clone() for L1 cache deep-copying mode
Storable dclone() is over 3x faster then Clone::clone() when used for
creating a deep copies of the big, complex data structures like MARC
frameworks. See also Bug 16044 comments #18 & #20.
This is a trivial version of Bug 16166. Performance test
results (see Bug 16140 comment #23 for test setup description):
Bug 16166 is a bit faster and more comprehensive implementation, but
also more complex and harder to test/evaluate.
Test plan:
1) apply patch
2) profile GetMarcStructure() calls before / after patch, e.g. by
running some script which calls it often (like catalogue search
w/ XSLT processing turned on, etc.)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 18 Apr 2016 13:21:12 +0000 (13:21 +0000)]
Bug 15534 [QA Followup] - Remove superfluous lines from unit tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Sat, 6 Feb 2016 03:59:31 +0000 (03:59 +0000)]
Bug 15534 - Add the ability to prevent a patron from placing a hold on a record with available items
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Tue, 12 Apr 2016 13:18:20 +0000 (15:18 +0200)]
Bug 15533: Fix 'ambiguous' SQL query in CanItemBeReserved
Adding reserves.itemtype made a query to fail in CanItemBeReserved.
This patch prefixes the column names with the corresponding table names
to prevent that.
You can trigger the error by running
prove t/db_dependent/Holds.t
You should see something like this:
Column 'itemtype' in where clause is ambiguous
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 25 Dec 2015 12:05:57 +0000 (12:05 +0000)]
Bug 15533 - Allow patrons and librarians to select itemtype when placing hold
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se> Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Sat, 19 Dec 2015 11:34:03 +0000 (11:34 +0000)]
Bug 15532: Add ability to allow only items whose home/holding branch matches the hold's pickup branch to fill a given hold
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Fri, 18 Mar 2016 13:39:27 +0000 (13:39 +0000)]
Bug 16105: Do not initialize the memory cache if not needed
Cache::Memory is loaded and Koha::Cache::_initialize_memory is called
even if a memcached cache has been correctly initialize, it does not
make sense.
It should only be initialize if needed.
Test plan:
Correctly configure a memcache server and confirm that the memory cache
is not initialize.
Do not configure correctly a memcache server and confirm that the cache
system default on Cache::Memory
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
projects / koha.git / log