Bernardo Gonzalez Kriegel [Thu, 29 Oct 2015 12:13:26 +0000 (09:13 -0300)]
Bug 15049: (Signed off) Hide currency but preserv alert
This follow up hides currency, but the alert pops
if no currency is active.
To test:
1) Apply the patch
2) Unset any active currency
3) Alert must show on Acquisitons home
4) Set a currency active, no currency display on Acqui home
5) Check that currency IS displayed on /cgi-bin/koha/admin/aqbudgets.pl
or /cgi-bin/koha/admin/aqbudgetperiods.pl
Amended for better translation
Currency does / does not display as described in test plan.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Thu, 22 Oct 2015 09:44:23 +0000 (11:44 +0200)]
Bug 15049: Add warning about "No active currency" to Acquisitions start page
If no active currency is defined, Acquisitions does not work properly and software
can occur while receiving.
This patch adds the warning message about missing active currency to Home > Acquisitions
To test:
- Apply patch
- Go to Home > Administration > Currencies & Exchange Rates > Currencies
- Make sure that no active currency is set
- Go to Home > Acquisitions
- Verify that a warning displays:
- If user has at least permission for parameters_remaining_perissions,
the warning should display a link to Currencies and exchange rates (currency.pl)
- If the user has no permission to edit the Currencies and exchange rates,
no link is displayed.
- Set an active currency
- Veryfy that the warning no longer displays
(Amended to remove superfluous line / mv)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Olli-Antti Kivilahti [Thu, 29 Oct 2015 13:40:50 +0000 (15:40 +0200)]
Bug 15080 - ./translate tool should tell if xgettext executable is missing
Just upgraded our Koha container to 14.04 and noticing the
misc/translator/translate doesn't work. This is because of a missing
package gettext.
This patch makes ./translate die with a helpful suggestion to install
gettext if xgettext-program is missing.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I can reproduce the bug by desinstalling 'gettext' package on a Debian
box. I confirm that without this patch, 'translate' command fails
miserably. Suggesting to install gettext package is welcomed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Aleisha [Thu, 20 Aug 2015 03:34:48 +0000 (03:34 +0000)]
Bug 10468: (followup) fix indentation
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Aleisha [Thu, 20 Aug 2015 03:34:48 +0000 (03:34 +0000)]
Bug 10468: Adding holds table to summary print
To test:
1) Add a hold to a patron
2) Go to patron page
3) Click Print Summary
4) Confirm that 'Pending Holds' table displays with correct information under appropriate headings (should be Title, Author, Placed on (reserve date), Expires on (expiration date), and Pick up library)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Kyle M Hall [Tue, 3 Nov 2015 19:43:17 +0000 (14:43 -0500)]
Bug 12544 - Send scheduled reports as an attachment
This patch adds the ability to add the report as an attached file
to the sent email.
Test Plan:
1) Email yourself a test report
2) Apply this patch
3) Repeat step 1, note there is no difference
4) Add the -a parameter, note your also recieve the report as an attachment
Sponsored-by: Briar Cliff University
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julius Fleschner <Julius.fleschner@briarcliff.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Joonas Kylmälä [Tue, 1 Sep 2015 07:26:40 +0000 (07:26 +0000)]
Bug 12289: (follow-up) fix the compilation error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Martin Renvoize [Mon, 19 May 2014 13:20:50 +0000 (13:20 +0000)]
Bug 12289: Add --no-create options to stage_file.pl
This patch adds the no-create options to the command line interface
for bulk loading of records.
To test
1/ Apply both patches
2/ Call the script with --no-create and your will find that new
records are not created when no match is found. The default, of
create_new remains the same as before.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mirko Tietgen [Fri, 18 Dec 2015 09:24:29 +0000 (10:24 +0100)]
Bug 15396: fix MARC21 Leader plugin label '1-4 Record size'
The plugin label says "1-4 Record size", but it's actually 0-4.
http://www.loc.gov/marc/bibliographic/bdleader.html
Test plan:
-apply patch
-in cataloging, open a record in a framework that uses the plugin
-open LEADER/000 and check that the label says "0-4 Record size" now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Good catch, fixed tab, no errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 01:52:02 +0000 (02:52 +0100)]
Bug 14853: Change 'Fund' to 'Shipping fund'
Changes the 'Fund' to 'Shipping fund' so it's clear
what the fund setting is used for.
To test:
- Receive a new shipment
- Verify that 'Shipping fund' displays on the parcels page
- Search for your invoice
- View invoice details
- Verify that 'Shipping fund' displays on the invoice page
Followed test plan (changed lines: '...cost' -> '...fund')
Display OK on both places.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 9 Dec 2015 15:10:10 +0000 (16:10 +0100)]
Bug 15340: Translatability: fix issue with 'or choose' splitted by <strong> tag
This patch fixes a translatability issue due to <trong> tags.
To verify:
- Make sure that you have some entries in 'Cities and Towns'
( Home > Administration > Cities )
- Edit the main address of a patron's details
- Locate field "City", at the right you have the text 'or choose'
followed by a drop-down ('choose' is bold)
- change language e.g. to German, the text reads 'or auswählen'
(instead of 'oder auswählen')
- This is due to the <strong> tags around 'choose'
To test:
- Apply patch
- Verify that the <strong> tags around 'choose' are removed in:
koha-tmpl/intranet-tmpl/prog/en/includes/member-main-address-style-de.inc
koha-tmpl/intranet-tmpl/prog/en/includes/member-main-address-style-us.inc
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Obvious issue/solution
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Tue, 22 Dec 2015 15:37:41 +0000 (15:37 +0000)]
Bug 15409 - Plugins section missing from Admin menu sidebar
The sidebar menu in the Admin area of Koha is missing a section for
Plugins.
Test Plan:
1) Apply this patch
2) Log in with a user that has plugin permissions
3) Browse to a page with the admin menu sidebar, such as
/cgi-bin/koha/admin/transport-cost-matrix.pl
4) Note the new Plugins section with a link to manage plugins
5) Log in with a user that has no plugin permissions
6) Revisit the same page, note the Plugins section is no longer visible
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 16:49:16 +0000 (16:49 +0000)]
Bug 15099 [QA Followup] - Make bug pass koha-qa.pl
Cleaned up additional tab characters and such well. This is a very
good time to take care of these.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 2 Dec 2015 08:49:50 +0000 (08:49 +0000)]
Bug 15099: Move admin/categorie.pl to admin/categories.pl
This patch fixes the filename categorie.pl correcting it by categories.pl
The plurial is usually used for script names in the admin module.
Test plan:
Navigate to the patron categories page.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
No reference to categorie.pl anywhere in the code
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 28 Dec 2015 15:00:54 +0000 (16:00 +0100)]
Bug 15432: t/db_dependent/Letters.t depends on external data/configuration
To test:
- Set system preference LetterLog to 'Don't log'
- prove t/db_dependent/Letters.t
- Result: Fails on test 62 - Successfully sent claim
- Apply patch
- Test again
- Result: Pass OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: removed the bug reference, not needed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Sun, 20 Dec 2015 19:57:54 +0000 (19:57 +0000)]
Bug 15373: More changes of Zip to ZIP on intranet
To test:
- Log in to Staff Interface, go to Administration, Libraries and Groups (cgi-bin/koha/admin/branches.pl). Click 'New library' and confirm that it says 'ZIP/Postal Code:' in the form.
- Go back to Administration, Cities and towns (cgi-bin/koha/admin/cities.pl). Confirm it says 'ZIP/Postal code' in table heading. Click 'New city' and confirm it says 'ZIP/Postal code:' in form
- Go back to Administration, Global system preferences, I18L/L10N (cgi-bin/koha/admin/preferences.pl?tab=i18n_l10n). Under AddressFormat, confirm all available options say '[ZIP/Postal Code]'
- Go to Reports, Patrons (cgi-bin/koha/reports/borrowers_stats.pl). Confirm it says 'ZIP/Postal code' under Title
- Go to Tools, Batch patron modification (cgi-bin/koha/tools/modborrowers.pl), enter any card number and click 'Continue'. Confirm it says 'ZIP/Postal code' in the table of patron details, and in the form to edit
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Tested together with first patch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Mon, 14 Dec 2015 22:43:26 +0000 (22:43 +0000)]
Bug 15373: Changing Zip to ZIP on OPAC and Intranet
To test:
1) Login to OPAC --> You personal details.
2) Ensure it says 'ZIP/Postal Code' under Main Address, Alternate Address and Alternate Contact
3) Login to Staff interface --> Go to a member's page (ie koha/members/memberentry.pl) --> Details.
4) Ensure it says 'ZIP/Postal Code' under Alternate address and Alternative contact
5) Click Edit
6) Ensure it says 'ZIP/Postal Code' under Main Address, Alternate Address and Alternate Contact
Signed-off-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Tested together with second patch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 16:28:32 +0000 (16:28 +0000)]
Bug 9819 [QA Followup] - Fix DBrev description
Kyle M Hall [Wed, 30 Dec 2015 16:25:06 +0000 (16:25 +0000)]
Bug 11569 - [QA Followup] - Update English description for existing installations, DBrev 3.23.00.005
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Mon, 21 Dec 2015 22:45:57 +0000 (22:45 +0000)]
Bug 11569: Correcting typos in userpermissions.sql
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 16:01:23 +0000 (16:01 +0000)]
Bug 9819 - DBrev 3.23.00.004
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 15:54:56 +0000 (15:54 +0000)]
Bug 9819 [QA Followup] - Removed missed stopwords refs, remove Schema file
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Dec 2015 10:07:39 +0000 (10:07 +0000)]
Bug 9819: Make the tests pass
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Mon, 22 Apr 2013 12:10:13 +0000 (09:10 -0300)]
Bug 9819 - QA Followup: Stopwords vestiges in es-ES removed
Gotcha.
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Wed, 10 Apr 2013 14:13:10 +0000 (11:13 -0300)]
Bug 9819 - Make updatedatabase.pl remove the 'stopwords' table
To test:
- Apply the patch
- Will be prompted to run the updater
- The 'stopwords' database should be removed
( test on a mysql prompt with
> SHOW TABLES LIKE 'stopwords';
and should get no results)
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Wed, 10 Apr 2013 14:06:45 +0000 (11:06 -0300)]
Bug 9819 - Remove 'stopwords' table from kohastructure.sql
Just that.
To test:
- Apply the patch
- Do a fresh install
- The database structure should be created flawlessly
- There should not be a 'stopwords' table created
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Wed, 10 Apr 2013 13:52:54 +0000 (10:52 -0300)]
Bug 9819 - 'stopwords'-related code removed
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 15 Dec 2015 15:15:25 +0000 (10:15 -0500)]
Bug 15382: 245$a visibility constraints not respected in opac-MARCdetail.pl
This tiny change determines if the bibliotitle should be set or not
in accordance with the 'Advanced constraints' visiblity setting for
OPAC.
TEST PLAN
---------
1) Find a record detail in OPAC
2) Click 'MARC view'
-- 245$a should be visible.
3) In a new tab, log into the staff client
4) Click 'Koha administration'
5) Click 'MARC bibliographic framework'
6) Click 'MARC structure' for the framework of
the record displayed in OPAC.
7) Search for tag: 245, and click 'Search'
8) Click 'Subfields'
9) Click 'Edit' beside the a subfield.
10) Click 'Advanced constraints'
11) Uncheck 'OPAC'
12) Click 'Save changes'
13) In the OPAC tab, refresh
-- 245$a (Title) will still be visible!
14) Apply this patch
15) In the OPAC tab, refresh
-- 245$a (Title) will be hidden.
16) In the staff client, navigate back to
'Advanced constraints' and check 'OPAC'
17) Click 'Save changes'
18) In the OPAC tab, refresh
-- 245$a (Title) will be visible again.
19) Run koha qa tools
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 17:38:52 +0000 (12:38 -0500)]
Bug 15317 - Use Bootstrap modal for MARC and Card preview when ordering from staged files
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the page in Acquisitions for ordering from a staged
file so that the "MARC" and "Card" previews display in Bootstrap modals.
To test:
1. Apply the patch and navigate to Acquisitions.
2. Locate an exsiting basket or create a new one.
3. Add to the basket using the option to order from a staged file.
4. Click "Add orders" from any staged file.
5. Test the "MARC" and "Card" links for multiple results and confirm
that the correct data is shown each time.
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 19:33:59 +0000 (14:33 -0500)]
Bug 15316 - Use Bootstrap modal for authority Z39.50 search results preview
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the authorities Z39.50 search results page so that
MARC previews are displayed in Bootstrap modals. This patch also
modifies the authorities toolbar include file to make the Z39.50 search
popup size match that in cataloging.
Because the modal is triggered from a pop-up window, the modal has been
reformated to exclude the footer and reduce the size of the modal
header.
To test:
1. Apply the patch and navigate to Authorities.
2. Click the "New from Z39.50" button to open the search
window.
3. Perform any search which will return multiple results.
4. Test the visible "MARC" link for multiple results and
confirm that the correct data is shown each time.
5. Click anywhere in the results table to show the hidden menu and test
the "MARC" link it displays.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 13:53:26 +0000 (08:53 -0500)]
Bug 15320 - Use Bootstrap modal for MARC preview when ordering from an existing record
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the page in Acquisitions for ordering from an
existing record so that the "View MARC" preview is displayed in
Bootstrap modals.
To test:
1. Apply the patch and navigate to Acquisitions.
2. Locate an exsiting basket or create a new one.
3. Add to the basket using the option to search for an existing
record.
4. Perform any search which will return results.
5. Test the "View MARC" link for multiple results and confirm
that the correct data is shown each time.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 13:44:02 +0000 (08:44 -0500)]
Bug 15318 - Use Bootstrap modal for MARC and Card preview when ordering an external source
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the page in Acquisitions for ordering from an
external source so that the "MARC" and "Card" previews display in
Bootstrap modals.
This patch also fixes a bug where the in-table popup menu points to the
wrong record (fixed in Cataloging by Bug 6367).
To test:
1. Apply the patch and navigate to Acquisitions.
2. Locate an exsiting basket or create a new one.
3. Add to the basket using the option to order from an external source..
4. Perform a search which will return multiple results.
5. Test the "MARC" and "Card" links for multiple results and confirm
that the correct data is shown each time.
6. Click anywhere in the results table to show the hidden menu and test
the "MARC" and "Card" links it displays, confirming that the data
looks correct and corresponds correctly to the title you selected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 14:26:35 +0000 (14:26 +0000)]
Bug 15442 - Checkouts table will not display due to javascript error
Uncaught ReferenceError: AllowCirculate is not defined
Test Plan:
1) Go to circulation.pl for a patron, note the checkouts table
does not load
2) Apply this patch
3) Reload the page, checkouts table should show
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 14:56:28 +0000 (14:56 +0000)]
Bug 8085 - DBrev 3.23.00.003
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Thu, 3 Dec 2015 13:02:17 +0000 (14:02 +0100)]
Bug 8085: Follow-up: Update to 'Hold Slip' for existing installations
Title and description are updated separately, in case that the
library has changed one of them when editing the slip.
To test:
- Verify that you have a letter named 'Reserve Slip' in your database
- Run the database update
- Verify the slip has been renamed correctly
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Job done on a Koha English version. It won't hurt other langages
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 00:32:26 +0000 (01:32 +0100)]
Bug 8085: Rename 'Reserve slip' to 'Hold slip'
This patch changes all occurrences of 'Reserve slip'
to 'Hold slip' in the sample notices files and
in one of the system preferences.
To test:
- Make sure the sample_notices.sql are correctly
changed.
- Verify the description of the SlipCSS system
preference has been changed correctly.
Checked the working in system preferences and re-loaded notices from the
updated English sample notices SQL. Changes look correct.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 8 Dec 2015 10:15:44 +0000 (10:15 +0000)]
Bug 15319: Move marcPreview modal div to avoid duplication
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Good catch Jonathan, thank you.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 02:21:37 +0000 (21:21 -0500)]
Bug 15319 - Use Bootstrap modal for MARC preview when performing batch record modifications
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the batch record modification page so that the
"Preview MARC" link triggers a preview in a Bootstrap modal.
To test:
1. Apply the patch and navigate to Tools -> Batch record modification.
2. Submit multiple biblionumbers for batch modification.
3. In the results list, click the "Preview MARC" link for multiple
results and confirm that the correct data is shown each time.
4. Use the "Modify record using the following template" menu to change
the modification template.
5. Confirm that the "Preview MARC" links still work and show data
correctly modified by your newly chosen template.
6. Repeat steps 2-5 with authority record numbers.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. No regression.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Sat, 5 Dec 2015 01:37:47 +0000 (20:37 -0500)]
Bug 15327: Minor tweaks to Bootstrap modal handling on Staged MARC management page
This patch makes a couple of minor corrections to the template for
staged MARC management. The MARC preview is now formatted using the
"html" option, and some obsolete Greybox-related code has been removed.
To test:
1. Apply the patch and go to Tools -> Staged MARC management.
2. Click any staged MARC file containing multiple records.
3. Click the title in the "Citation" column and confirm that a Bootstrap
modal is triggered showing the correct data.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Modal looks much better. Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nicholas van Oudtshoorn [Tue, 22 Dec 2015 03:44:13 +0000 (11:44 +0800)]
Bug 15405 - XML paths to zebra libraries is wrong for 64-bit installs on non-Debian linux Adjusts the modulePath to search in the well-known location for 64 bit systems. Required for at least Fedora.
Test plan:
Without this patch, doing a zebra reindex on a fedora-based install will cause errors like this:
15:10:47-01/05 zebraidx(16108) [warn] No such record type: dom./etc/koha/zebradb/biblios/etc/dom-config.xml
With this patch, reindexing should just work.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
I have tested this doesn't break on debian/ubuntu systems, someone with a non
debian system will need to test it on that
Signed-off-by: Bob Ewart bob-ewart@bobsown.com
It works on openSUSE Leap 42.1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Just noting that the debian zebra files already contain much more paths here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 14:08:37 +0000 (14:08 +0000)]
Bug 11747 - Update Koha.pm to DBrev 3.23.00.002
Frédéric Demians [Wed, 30 Dec 2015 12:10:16 +0000 (13:10 +0100)]
Bug 15429 UT for _parseletter modifying its parameter
Before/after applying the related patch, do:
prove -v t/db_dependent/Letters.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 28 Dec 2015 09:29:17 +0000 (10:29 +0100)]
Bug 15429 - sub _parseletter should not change referenced values
In C4/Letters.pm, sub _parseletter changes values that are passed by
reference. E.g. patron's expiry date can change from iso format to
syspref format, leading to strange behaviour in the calling routines
(see Bug 15423).
This patch makes sub _parseletter work on a copy of the referenced values.
(Submitted to get feedback - is this the way to go?)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Good solution to real time bomb.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 16 Dec 2015 15:00:15 +0000 (16:00 +0100)]
Bug 15386: Checkout / patron pages: Hide menu items leading to 404 pages
Some of the menu items on patron / Checkout related pages lead to a 404 page
depending on the permissions. This patch hides them as appropriate.
To test:
- For a staff member A, set permission 'borrowers' only (+ 'catalogue')
- Log in as A
- Search a patron and display details
- Verify that none of the menu items at the left lead to the 404 page
- For a staff member B, set permission 'circulate_remaining_permission'
only (+ catalogue)
- Log in as B
- Go to Circulation > Checkout, search a patron
- Click menu items at the left, some of them lead to the 404 page
- Verify that none of the menu items at the left lead to the 404 page
- Do the same for a staff member C with both permissions set
- Verify that menu items appear as expected
Signed-off-by: Lucio Moraes <lmoraes@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: I have remove the double if
CAN_user_circulate_circulate_remaining_permissions statement (and group
block into one). And also remove unecessary change ('IF a IF b' instead
of existing 'IF a && b')
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Wed, 25 Nov 2015 13:02:05 +0000 (14:02 +0100)]
Bug 15252 - Add tests
Tested 4 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Wed, 25 Nov 2015 11:34:18 +0000 (12:34 +0100)]
Bug 15252 - Patron search on start with does not work with several terms
When searching a patron, search type can be 'start with' and 'contain'.
If the search text contains a space (or a coma), this text is splitted into several terms.
Actually, the search on 'start with' with several terms never returns a result.
It is because the search composes an "AND" SQL query on terms.
For example (I display only the surname part) :
search type = contain :
'jean paul' => surname like '%jean% AND %paul%'
search type = start with :
'jean paul' => surname like 'jean% AND paul%'
The query for 'start with' is impossible.
I propose, for search with start with, to not split terms :
jean paul => surname like 'jean paul%'
One can always use '*' to add more truncation :
jea* pau* => surname like 'jea% pau%'
This bug affects a lot surnames with several terms like 'LE GUELEC' or 'MAC BETH'.
Note that the patch moves :
$searchmember =~ s/,/ /g;
It removes the test "if $searchmember" because $searchmember is tested and set to empty string previously :
unless ( $searchmember ) {
$searchmember = $dt_params->{sSearch} // '';
}
Test plan :
==========
- Create two patrons with firstname "Jean Paul"
- Go to Patrons module
- Choose "Starts with" in "Search type" filter
- Perform a search on "Jean Paul"
=> without patch : you get no result
=> with this patch : you get the two results
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you do not get results for search on "Jea Paul"
- Choose "Contains" in "Search type" filter
- Check you get the two results for search on "Jean Paul"
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you get the two results for search on "Jea Paul"
- Check you get the two results for search on "Paul Jean"
Signed-off-by: Alex <alexklbuckley@gmail.com>
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - Patron search on start with does not work with several terms - followup 1
'start_with' is the default value of $searchtype, it can be explicit.
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - correct UT searchtype value is contain and not contains
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 4 Dec 2015 16:27:20 +0000 (11:27 -0500)]
Bug 15309 - Use Bootstrap modal for cataloging search MARC and Card preview
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones. This
patch modifies the cataloging search results page so that "MARC" and
"Card" previews are displayed in Bootstrap modals.
To test:
1. Apply the patch and navigate to Cataloging.
2. Perform a search which will return results from the catalog.
3. Test the "MARC" and "Card" links for multiple results and confirm
that the correct data is shown each time.
4. Perform a search which will return results from the reservoir.
5. Test the corresonding "MARC" and "Card" links for those results.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 2 Dec 2015 11:38:27 +0000 (11:38 +0000)]
Bug 14636: Remove debug message
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Wed, 25 Nov 2015 17:00:33 +0000 (18:00 +0100)]
Bug 14636: Follow-up - fix typo in system preference name
The preference is named "marcflavour" not "marcflavor".
Without this change, search will always use "copyrightyear"
and break search by publication date for UNIMARC.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Wed, 25 Nov 2015 16:06:01 +0000 (17:06 +0100)]
Bug 14636: Item search - biblioitems column is publicationyear not publicationdate
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for the follow-up!
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sat, 21 Nov 2015 21:37:03 +0000 (22:37 +0100)]
Bug 14636: Item search - improving display
- Changes "Publication Date" to "Publication date"
in the CSV export
- Fixes 'no JavaScript fallback' display to match
the normal display
- only show 'by' when it's UNIMARC and an author
exist
- show copyrightdate if publicationyear is empty
To test:
- Turn of Javascript in your browser before you
item search. This will activate the alternative
display.
- For MARC21:
- Verify that the author displays when existing
and no 'by' is shown.
- Verify that the publication date is now shown.
- For UNIMARC:
- Verify that 'by' only displays when there is
an author to display.
- Verify that the publication date is still
shown.
- Try the CSV export.
- Verify that the CSV header now reads 'Publication date'.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Successfully tested non-JS behavior and CSV export. DID NOT test
UNIMARC.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sat, 21 Nov 2015 21:32:52 +0000 (22:32 +0100)]
Bug 14636: Item search - fix search and sort by publication date for MARC21
Problem: MARC21/NORMARC stores the publication
date in biblio.copyrightdate, but UNIMARC uses
biblioitems.publicationyear.
To test:
- Without patch in a MARC21 installation:
- Search by publication date
- Verify that the results don't match the
publication year you searched for.
- Try sorting the table by publication year.
- Verify that the sort doesn't work.
- Apply patch.
- Repeat both, search and sort.
- Verify both work correctly now.
- Repeat tests on a UNIMARC installation.
- Verify both still work.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested searching and sorting successfully in a MARC21 installation. DID
NOT test in UNIMARC.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Dec 2015 17:41:04 +0000 (17:41 +0000)]
Bug 15344: Remove some other calls of GetMemberDetails from pl scripts
Same as previously.
For these files it's a bit less obvious.
To make sure these changes won't introduce any regression, check that
the variable returned by GetMember is never used to get something
else than a borrower fields.
The 'flags' should not be get neither.
For opac-user.tt it's different, other keys are got but there are defined
in the pl script.
On the way:
- 'showname' is removed (never used)
- fix scope var issue in opac-user.tt (BORROWER_INF.OPACPatronDetails vs
OPACPatronDetails)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Dec 2015 17:00:10 +0000 (17:00 +0000)]
Bug 15344: Remove unucessary call to GetMemberDetails
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 11:48:36 +0000 (11:48 +0000)]
Bug 11747 - DBrev 3.23.00.002
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 22 Apr 2015 15:21:53 +0000 (11:21 -0400)]
Bug 11747 [QA Followup] - Use system preference
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 21 Apr 2015 15:19:24 +0000 (11:19 -0400)]
Bug 11747 - Implement DefaultToLoggedInLibraryOverdueTriggers
This patch makes the default circ rules and notices/slips to edit
the logged in branch, if one is set.
Test Plan:
1) Apply this patch
2) Log into staff side, and set your library
3) Browse to Tools/Overdue notice/status triggers
4) Note the actions displayed are for your library
5) Select "All libraries"
6) Note the actions displayed are for "All libraries"
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 21 Apr 2015 15:17:14 +0000 (11:17 -0400)]
Bug 11747 - Add system preference DefaultToLoggedInLibraryOverdueTriggers
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: INSERT IGNORE INTO + msg
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 30 Dec 2015 11:45:01 +0000 (11:45 +0000)]
Bug 11625 - DBRev 3.23.00.001
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 23 Apr 2015 13:41:17 +0000 (15:41 +0200)]
Bug 11625: Implement DefaultToLoggedInLibraryNoticesSlips
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 21 Apr 2015 15:03:27 +0000 (11:03 -0400)]
Bug 11625 - Implement DefaultToLoggedInLibraryCircRules
This patch set makes the default circ rules and notices/slips to edit
the logged in branch, if one is set.
Test Plan:
1) Apply this patch
2) Log into staff side, and set your library
3) Browse to Administration/Circulation and fines rules
4) Note the rule set selected is for your library
5) Select "All libraries"
6) Note the rule set selected is for "All libraries"
7) Browse to Toos/Notices & slips
8) Note the notice set selected is for your library
9) Select "All libraries"
10) Not the rule set selected is for "All libraries"
11) Click "New Notice"
12) Note the Library field is set to "All libraries"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 21 Apr 2015 14:59:46 +0000 (10:59 -0400)]
Bug 11625 - Add system preferences DefaultToLoggedInLibraryCircRules and DefaultToLoggedInLibraryNoticesSlips
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: INSERT IGNORE INTO + msg
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Gaetan Boisson [Fri, 9 Oct 2015 12:44:44 +0000 (14:44 +0200)]
BUG 14991 Improve consistency of authority search
At the moment we can search authorities from two places: authorities-home.pl and auth_finder.pl (while cataloguing).
The auth_finder.pl page offers searching specifically in the $a of the main heading, while the authorities home page doesn't.
Additionally, the wording and order of the options is different.
authorities-home.pl has:
Search main heading
Search all headings
Keyword search
while auth_finder.pl has:
Main entry ($a only)
Main entry
Anywhere
Heading match
This patch will add some consistency so that both pages offer:
Search main heading ($a only)
Search main heading
Search all headings
Search entire record
Test plan:
- apply patch
- go to authorities home
- check that previous searches are still working
- check that the new ($a only) search is working
- go to auth finder (from cataloguing)
- check that searches are still working
- check that we do have the same wording in both pages and that forms are now consistent
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 4 Oct 2015 09:38:03 +0000 (11:38 +0200)]
Bug 14948 - Display amounts right aligned in tables on patron pages
This patch set display amounts for charge, fine, price etc. right aligned in tables
on patron pages.
To test, apply patch and verify that amounts appear right aligned on following pages:
- Go to Home > Patrons, perform a search (Column 'Fines')
- Go to a patron with fines and credits
- Checkout tab (circulation.pl): Columns 'Charge', 'Fine', 'Price'
(maybe you have to show column with 'Show / hide colums')
- Fines Tab > Pay fines (pay.pl): Columns 'Amount', 'Amount Outstanding'
- Fines Tab > Account (boraccount.pl): Columns 'Amount', 'Outstanding'
Note: Test here 'Filter paid transactions' as well
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Sun, 13 Dec 2015 22:24:05 +0000 (22:24 +0000)]
Bug 14153: Noisy warns in admin/transport-cost-matrix.pl
To test:
1) Go to Admin -> Transport cost matrix
2) Notice the warns in the error log
3) Apply the patch and refresh page
4) Notice page still works but no warns in error log
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Init a $op variable, if it must be reused later.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Nick [Wed, 18 Nov 2015 16:49:15 +0000 (11:49 -0500)]
Bug 15210 - Novelist throws an error if no ISBN
This patch makes opac-detail.tt check for an ISBN before attempting to load Novelist content and prevents a js error which breaks other code.
To test:
1 - Enable novelist
2 - Add a visible change to OPACUserJS eg: $(document).ready(function() {$("body").css("background-color","pink");});
3 - Load a record with no ISBN
4 - Note you do not see a color change in the body and that there is an error in the console
5 - Apply patch
6 - Reload the record
7 - You should see the color change and no error in the js
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Mon, 9 Nov 2015 17:05:39 +0000 (11:05 -0600)]
Bug 15170 - Add 264 field to MARC21*DC.xsl
Modify MARC21*DC.xsl to add RDA 264 field
To test:
- Copy from LOC z39.50 the Maxwell's handbook for RDA (ISBN
9780838911723)
- Look the field 264 in framework, save record
- Open this URL in OPAC
/cgi-bin/koha/unapi?id=koha:biblionumber:41201&format=marcxml
And play with id (the number of new record for Maxwell book) &
format parameters
Test format=rdfdc, format=srw_dc and format=oai_dc
- Notice that <dc:publisher> and <dc:date> are not present
- Apply this patch
- Reload the URL for the three formats
- You will see the tags publisher and date are taken from 264
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 8 Dec 2015 15:10:46 +0000 (15:10 +0000)]
Bug 15324: Do not display 'Waiting holds:" if no holds are waiting
Test plan:
- Make sure that you have a patron A with waiting holds and a patron B
without waiting holds
- Go to the checkout page for patron A (Home > Circulation > Checkouts
> ...)
- At the right, there is a title "Waiting holds:" and a list of
holds waiting
- Go to the checkout page for patron B
=> Without this patch "Waiting holds:" is displayed
Sign-off on Jonathan's patch
Signed-off-by: Marc Véron <veron@veron.ch>
http://bugs.koha-community.org/show_bug.cgi?id=14324
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Fri, 4 Dec 2015 23:49:39 +0000 (18:49 -0500)]
Bug 15314: Use Bootstrap modal for cataloging merge MARC preview
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the cataloging merge selection page so that the
MARC preview is shown in a Boostrap modal. This patch also changes the
preview link to be the text "View MARC" so that it is clear what it
does.
To test:
1. Apply the patch and navigate to Cataloging.
2. Perform a search which will return results from the catalog.
3. Select two records and click the "Merge selected" button to begin the
merge process.
4. Test the "View MARC" link for both merge choices and confirm that the
correct data is shown each time.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Fri, 4 Dec 2015 19:32:08 +0000 (14:32 -0500)]
Bug 15313 - Use Bootstrap modal for z39.50 search MARC and Card preview
In order to reduce the number of dependencies for common interactions we
should attempt to use Bootstrap modals in place of Greybox ones.
This patch modifies the cataloging Z39.50 search results page so that
"MARC" and "Card" previews are displayed in Bootstrap modals.
Because the modal is triggered from a pop-up window, the modal has been
reformated to exclude the footer and reduce the size of the modal
header.
To test:
1. Apply the patch and navigate to Cataloging.
2. Click the "New from Z39.50/SRU button to open the search
window.
3. Perform any search which will return results.
4. Test the visible "MARC" and "Card" links for multiple results and
confirm that the correct data is shown each time.
5. Click anywhere in the results table to show the hidden menu and test
the "MARC" and "Card" links it displays.
Corrected: The original patch didn't address the hidden menu which
appears if you click in any table cell.
Followed test plan, works as expected (including click in table cell).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 18 Dec 2015 17:32:31 +0000 (17:32 +0000)]
Bug 15289 [QA Followup] - Fix minor language issue
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Alex Arnaud [Tue, 15 Dec 2015 13:11:54 +0000 (14:11 +0100)]
Bug 15289 - borrowers permission allows to see patron's loans
Test plan:
- log with a user that have "borrowers" permission but not "Remaining circulation permissions"
- go to a borrower's detail page (who has at least a loan) and click on "show checkouts"
- check that you see loan(s) and that you can't renew and checkin
- Do the same with a borrower that have "Remaining circulation permissions"
- check that you see loan(s) and that you can renew and checkin
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Fri, 18 Dec 2015 15:01:15 +0000 (15:01 +0000)]
Bug 15332: Sent DateTime object to DBIx::Class, not formatted dates
If formatted dates are sent to DBIx::Class on update/insert, the date
will be set as 0000-00-00 (except if the format is yyyy-mm-dd).
Test plan:
Use the batch patron modification tools to update the dateenrolled or
dateexpiry values for at least 1 patron.
Without this patch, the modified value will be updated to 0000-00-00,
with this patch, the correct value will be set.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Colin Campbell [Thu, 19 Nov 2015 14:17:10 +0000 (14:17 +0000)]
Bug 15217 Remove redundant duplicate var declaration
remove superfluous second declaration of template, borrowernumber and
cookie which are never used
Also removed the variables @results and @results_array which are
declared but not used
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
As suggested by Colin, perl -wc catalogue/search.pl doesn't complain
anymore after applying the patch. perlcritic confirms the 2 variables
were unused.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Mon, 23 Nov 2015 01:52:39 +0000 (19:52 -0600)]
Bug 15228: Switch "Items in batch number"
Yet another line to switch "Items in batch number" to
"Patrons in batch number"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 01:04:12 +0000 (02:04 +0100)]
Bug 15228: Patron card batches - Improve translatability
This patch removes the \n\n from a translatable string
as those don't translate correctly to new lines.
It also switches 'item' for 'patron' to avoid confusion
with catalog items.
To test:
1) Trigger changed error message
- Create a new batch with 1 patron entry
- Select patron in list using the checkbox
- Click 'Remove selected patrons' in toolbar
- Verify alert displays correctly
2) Verify that the page no longer uses "items" but
patrons instead.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 25 Nov 2015 16:45:50 +0000 (16:45 +0000)]
Bug 15101: Correct typo AllowPkiAuth vs AllowPKIAuth
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 01:43:36 +0000 (02:43 +0100)]
Bug 15101: Don't display sys pref AllowPkiAuth under CAS heading
The system preference AllowPkiAuth display under the heading
CAS authentication, but is actually a separate authentication
option. Patch creates a separate heading for it.
To test:
- Go to Administration > System preferences > Tab Administration
- Verify that AllowPkiAuth is now displayed separately
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 25 Nov 2015 16:14:35 +0000 (16:14 +0000)]
Bug 15229: Same fix for circulation.tt template (normal checkouts)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 00:48:31 +0000 (01:48 +0100)]
Bug 15229: Fix tiny typos in error messages of batch checkout page
Patch fixes some small spelling errors on the batch checkouts
page. Also switches 'reserves' to 'holds'.
To test:
- Read the patch and verify that the changes are correct.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Changes are correct, patch fixes capitalization and typo
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sun, 22 Nov 2015 01:13:12 +0000 (02:13 +0100)]
Bug 15224: Label creator - fix tiny typo 'itemnunber'
To test:
- Go to Tools > Label creator > New > Label batch
- Check text displayed in grey next to the text input
field
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Nicole C. Engard [Thu, 19 Nov 2015 15:31:01 +0000 (09:31 -0600)]
Bug 15220: Fix typo in circ rules help
MaxFinesystem should be MaxFine system
To test:
* visit circ & fine rules
* click help
* confirm typo fixed
Signed-off-by: Thomas Misilo <misilot@fit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 21 Nov 2015 02:25:56 +0000 (03:25 +0100)]
Bug 15238: Better translatability for Installer Step 1
This Bug streamlines html in installer/step1.tt for better translatibility.
To test:
Reviwe code and verify that changes in text make sense.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
To reproduce in Debian environment, remove a required module with
dpkg -r. Rewording Ok for translation purposes
Bug 15238: (followup) Remove word 'Note:'
'Note: ' removed as requested in comment #3
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Word 'Note' removed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 21 Nov 2015 02:09:55 +0000 (03:09 +0100)]
Bug 15237: Quote of the day: Better translatibility for editor and help
This patch moves html markup out of explanatory text in Quote of the day editor and help
for better translatibility (Home > Tools > Quote Editor).
To test:
- Apply patch
- Go to Home > Tools > Quote Editor and related Help
- Verify that text changes make sense.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translation purposes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Make consistent space after "Note:" (inside the br tag)
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 21 Nov 2015 01:32:30 +0000 (02:32 +0100)]
Bug 15236: Better translatibility in "Connect biblio.biblionumber to a MARC subfield"
This patch moves html markup out of explanatory sentence in koha2marclinks.tt ("Connect
biblio.biblionumber to a MARC subfield") for better translatability.
To test:
- Apply patch
- Go to Home > Administration < Koha to MARC mapping
and edit a tag
- Verify that text change makes sense
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translation purposes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 2 Dec 2015 23:10:28 +0000 (00:10 +0100)]
Bug 15233: (followup) Remove 2 sentences.
This patch removes 2 sentences (see comment #8)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 21 Nov 2015 01:10:24 +0000 (02:10 +0100)]
Bug 15233: Cataloging subfield editors: Clean up html and streamline text for better translatability
This patch removes bold markup from explanatory text in auth_subfields_structure.tt
and makes it the same as in marc_subfields_structure.tt for better translatibility.
To test:
- Apply patch
- Verify that string changes make sense and that the explanatory text is the same in both files.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translation purposes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 21 Nov 2015 00:31:00 +0000 (01:31 +0100)]
Bug 15232: Advanced Cataloging Editor: Fix translation issues
This patch makes
koha-tmpl/intranet-tmpl/prog/en/includes/cateditor-ui.inc to comply with
Coding guidlines to avoid translation issues: "JS3: Avoid strings which
mix text and markup Text mustn't contain HTML tags."
To test:
- Apply patch
- Verify that code changes are correct (html markup moved out of
function _(...) )
- Bonus test: Enable syspref 'EnableAdvancedCatalogingEditor' and verify
that it works as before
With type fix from: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 2 Dec 2015 05:33:32 +0000 (06:33 +0100)]
Bug 15231: (followup) Remove stray </b> tag
This patch removes a stray </b> tag (see comment #4) and a superfluous blank.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Fri, 20 Nov 2015 21:58:40 +0000 (22:58 +0100)]
Bug 15231 - Import patrons: Remove string splitting by html tags to avoid weird translations
Some of the strings in Home > Tools > Import patrons contain html tags and therefore are
splitted in the translation tool. This makes it nearly impossible to create correct translations
from the partial strings.
Additinally, the notes for Extended patron attributes never displayed (due to a bug).
To test:
- Apply patch
- Enable Syspref 'ExtendedPAtronAttributes'
- Go to Home > Tools > Import patrons and verify, that the Notes at the right of the
screen make sense
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Split html tags removed, notes at right side it displayed correctly
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 2 Dec 2015 14:34:44 +0000 (15:34 +0100)]
Bug 15301: branchtransfers.tt: Remove ambiguous "To" and fix splitted sentence
The file intranet-tmpl/prog/en/modules/circ/branchtransfers.tt contains two
ambiguous words 'to' and a sentence splitted up by html tags, leading to weird
translations. Example in German: "Sie können keine Exemplare aus itemtype
transferieren BK für: Airfield"
To test:
- Apply patch
- Set up transfer policies for item types and collection codes in
Home > Administration > Set library checkin and transfer policy
Make sure that you have rules that deny and others that allow transfers
- Verify that syspref 'UseBranchTransferLimits' is set to 'Enforce'
- Set 'BranchTransferLimitTypes' to 'item type'
- Go to Home > Circulation > Transfers
- Transfer an item that is allowed for item type
- Verify that the table of transferred items displays information
about Item type, Collection code and Destination
- Transfer an item that is not allowed for the item type
- Verify that the information about not allowing the transfer displays
properly and is meaningfull
- Set 'BranchTransferLimitTypes' to 'collection code'
- Repeat the transfer steps above for allowed / not allowed collection code
(Amended to add ids to table and 8 columns, see comment #2)
(Amended for comment #5)
Followup for comment #8
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 2 Dec 2015 11:39:59 +0000 (12:39 +0100)]
Bug 15300: Translatability: Replace ambiguous 'From' and 'To' in members-update.tt
This patch replaces semantically ambigous words "From" and "To" in
koha-tmpl/intranet-tmpl/prog/en/modules/members/members-update.tt
for better translatability.
To test:
- Apply patch
- Make sure that patrons can request detail changes in OPAC
(sysprefs opacuserlogin, OPACPatronDetails)
- Log in to OPAC, request a change of personal details
(cgi-bin/koha/opac-memberentry.pl)
- Log in to staff client
- Click link 'Patrons requesting modifications' or go to
Home > Patrons > Update patron records
- Verify that table headers make sense
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translation purpose
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 13 Dec 2015 21:39:53 +0000 (22:39 +0100)]
Bug 15366 - Fix breadcrumbs and html page title in guided reports
This patch fixes following issues with breadcrumbs and html page title
in Home > Reports > Guided reports wizard:
- Sometimes, breadcrumbs display a stray > at the end
- While creating a report, steps are not displayed in breadcrumbs and
do not appear in html page title
- html page title is divided by newlines
To test:
- Apply patch
- Go to Home > Reports > Guided reports wizard
- Go to all pages including the steps for creating a new report and
verify
- that the breadcrumbs display properly and make sense
- in html source, the page title makes sense and displays on one line.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as descrived
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 13 Dec 2015 19:34:46 +0000 (20:34 +0100)]
Bug 15365: Translatability: Fix issue on Administration > Circulation and fine rules
Fix translatability issue on smart-rules.tt to prevent odd translations (Sentences
splitted by tags and newlines).
To test:
- Apply patch
- Go to Administration > Circulation and fine rules
- Verify that the lines "Note: " and "Important: " below "Default holds policy by
item type" make sense and are not splitted by tags and (in html) by newlines.
(Amended to fix commit message)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
strong Note and Important displayed Ok for translation purpose
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 13 Dec 2015 10:58:52 +0000 (11:58 +0100)]
Bug 15363: Translatability: Fix issue with ambiguous 'all' on Administration > Set library checkin and transfer policy
In branch_transfer_limits.tt, set ambiguous word 'all' (separated by tags) into a
translatable context.
To test:
Apply patch
- Go to Home > Administration > Set library checkin and transfer policy
- Verify that the word 'all' is no longer separated by tags
in "For all collection codes: " rsp. "For all item types: "
(Switch with syspref 'BranchTransfersLimitsType')
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works well for translation purpose
Bug 15363: (followup) Move tags inside if statements
Followup for comment #3
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 13 Dec 2015 09:47:53 +0000 (10:47 +0100)]
Bug 15362: Translatability: Fix issue on Administration 'Did you mean?'
Fix sentence splitting by tags on didyoumean.tt leading to odd translations.
To test:
- Apply patch
- Go to Home > Administration > Did you mean?
- Verify that the information below the title displays properly and makes sense.
- Disable Javascript, reload page
- Verify that the warning about missing Javascript displays properly and makes sense.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as descrived. Removed em tags for translation purpose
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sun, 13 Dec 2015 09:08:41 +0000 (10:08 +0100)]
Bug 15361: Translatability: Fix issue on Administration Columns settings
This patch rewords the following sentence that is not correctly translatable due to
splitting b tags:
Changes made below will only apply to item subfields that are mapped to the items table.
To test:
- Apply patch
- Verify that the rewording makes sese and that no sentences are split by tags.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording message displayed Ok for translation purpose
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 9 Dec 2015 20:31:29 +0000 (21:31 +0100)]
Bug 15346: Translatability: fix sentence splitting issue in memberentrygen.tt
Fix sentences in memberentrygen.tt that are split by <strong> tags, leading to
wrong capitalization in German (because it can not be decided if a string is part
of a sentence or a standalone sentence).
Example: Es sind Keine Bibliotheken definiert.
To test:
- Apply patch
- To trigger the messages, you have to edit a patron in a system where
no libraries and no patron categories are defined
- Alternatively, carefully review the changes in
koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Sentences fixed for translation purposes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 9 Dec 2015 17:36:21 +0000 (18:36 +0100)]
Bug 15345: Translatability: fix issue in facets (Availability')
This patch fixes an issue with a splitted sentence in facets (Avalability)
that leads to weird translations e.g.:
German: 'Zeige nur Verfügbar Exemplare'
French: 'Montrer seulement disponible exemplaires'
Additionally, the link "Show all items" gets it's own li tags to display
nicely like the other links in the facets column and it removes superfluous
dots.
To test in OPAC and Staff client:
- Apply patch
- Do a search that results in more than one available items
- In column "Refine your search", click on "Limit to currently available
items"
- Verify that the message "Showing only available items" and the link
"Show all items" display nicely.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
use_zebra_facets set to 0 in koha-conf.xml to test. Works as described
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Barton Chittenden [Tue, 6 Oct 2015 13:54:41 +0000 (06:54 -0700)]
Bug 14515 (QA Followup) fix letter.pl available fields.
Add bibliotiems to the 'available fields' list for
module 'Holds' (aka reserves).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>