Mathieu Saby [Wed, 13 Mar 2013 15:12:03 +0000 (16:12 +0100)]
Bug 7593: Move orders on the destination record when merging 2 records
Revised patch according to QA comments. No more dependent from bz 9780.
At present, merging records breaks the link order/record, except
if an item of the deleted record is used in the order.
This is a serious issue for libraries creating items on receipt.
This patch moves existing orders from deleted record to destination record.
It creates a new function Acquisitions::GetOrdersByBiblionumber,
that could be used by other patches later.
To test :
Check the problem :
1. Set syspref AcqCreateItem = Create an item when receiving an order
1. Create a basket with one order
2. Put the record used by this order in a list
3. Put an other record in the list
4. Merge the 2 records, keeping as a reference the record NOT used in the order
5. In the order, you will see for that order "Deleted bibliographic information..."
6. Apply the patch
7. Repeat steps 1-4
8. In the order, you will see the title/author of the kept record.
9. Set syspref AcqCreateItem = Create an item when placing an order
10. Repeat steps 1-4 (an item will be created)
11. In the oreder, you will see the title/author of the kept record
(it is already the case at present. the patch should not alter this behavior)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan, test suite and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 14:14:48 +0000 (10:14 -0400)]
Merge branch 'bug_9680' into 3.14-master
Owen Leonard [Fri, 10 May 2013 16:12:11 +0000 (12:12 -0400)]
Bug 9680 - cart aligned right in CCSR
The CCSR theme sets a min-width of 1000px for windows which are more
than 700px wide. This caused the cart popup window to be given a
min-width of 1000px, resulting in a broken layout with unnecessary
horizontal scrolling.
This patch adds a class to the cart template and to other pop-up window
templates to ensure that a large min-width is not enforced and to give
consistent padding to those pages.
To test, set your theme to 'CCSR' and view the following pop-up pages:
- The Cart. From the cart, trigger:
- The "send" window
- The "download" window
- From a view of a List's contents trigger:
- The "send" window"
- The "download" window
Each of these pages should look correct with no horizontal scrolling.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template and CSS changes only, but no string changes.
Save for inclusion in 3.12.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 14:11:47 +0000 (10:11 -0400)]
Merge branch 'bug_10054' into 3.14-master
Kyle M Hall [Mon, 15 Apr 2013 13:09:05 +0000 (09:09 -0400)]
Bug 10054 - When SingleBranchMode is enabled, allow superlibrarians to set logged in library
Currently, when SingleBranchMode is enabled, nobody can change the
logged in library in Koha. To change it requires disable
SingleBranchMode, switching the library, and re-enabling it. It seems
reasonable to allow superlibrarians to switch the logged in library even
if SingleBranchMode is enabled.
Test Plan:
1) Apply this patch
3) Enable SingleBranchMode
4) Log in as a superlibrarian
5) Attempt to change the logged in branch
This change should succeed
6) Log in as a non-superlibrarian account
7) Attempt to change the logged n branch
This should not be allowed, as per Koha's current behavior
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I guess this doesn't do any harm even though the practical motivations
behind it, as described in the bug, seem otherwise solvable. If
SingleBranchMode is supposed to prevent librarians from switching their
logged in library why can they choose their library when they first log
in? Was SingleBranchMode supposed to only affect the OPAC originally? Or
should the login form be modified? This seems to be a band-aid on a
poorly-implemented feature.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works as decribed. As this only adds a check for a superlibrarian
it seems safe and should not interfere with normal staff accounts.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 14:09:38 +0000 (10:09 -0400)]
Merge branch 'bug_10225' into 3.14-master
Owen Leonard [Thu, 9 May 2013 19:08:41 +0000 (15:08 -0400)]
Bug 10225 - If an item isn't editable, don't show the onclick Edit/Delete menu
The user should not be shown edit/delete links when clicking on a row in
additems which they cannot edit because of the IndependantBranches
setting. This patch adds a class to the row to exclude such rows in the
JavaScript onclick handler.
To test:
- Turn IndependantBranches on and edit items for a title which
has holdings from various branches including your own.
- Click a row for an item which is held by your library. You should see
the "Edit/Delete" links appear.
- Click a row for an item which is held by another library. No links
should appear.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Changes to the templates include no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 14:05:40 +0000 (10:05 -0400)]
Merge branch 'bug_10134' into 3.14-master
Magnus Enger [Wed, 8 May 2013 09:10:27 +0000 (11:10 +0200)]
Bug 10134 - set XSLT usage ON as default, for new Koha installs
Currently, new installs are created with XSLT display set to "off",
but XSLT seems to be the preferred way to display records, so
having the default be "on" instead seems to make sense. This patch
will of course only affect new installs.
To test:
- Apply the patch
- Run through the webinstaller on an empty database
- Log in to the staff client and search for "xslt" in system
preferences
- Verify that XSLTDetailsDisplay, XSLTResultsDisplay,
OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay are all set to
"default"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passes test plan correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes syspref.sql for new installations to use XSLT views
by default. No changes to existing installations, no
string changes.
Passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 13:58:04 +0000 (09:58 -0400)]
Merge branch 'bug_9679' into 3.14-master
Owen Leonard [Fri, 10 May 2013 13:50:51 +0000 (09:50 -0400)]
Bug 9679 - can't place hold from cart in CCSR
When the CCSR theme is enabled, selecting items in the cart and clicking
"place hold" triggers a JavaScript error and fails. This patch adds a
function missing from the CCSR version of basket.js.
To test, apply the patch and clear your browser cache.
- Enable the CCSR theme and put items into the OPAC cart.
- Open the cart, select one or more items, and click "place hold."
The cart should automatically close and the main window should redirect
to the holds screen showing your selections.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test passed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed patch fixes the problem described.
All tests and QA script pass, JavaScript only change.
No strings involved, save for inclusion in 3.12.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 13:54:11 +0000 (09:54 -0400)]
Merge branch 'bug_10201' into 3.14-master
Owen Leonard [Tue, 7 May 2013 16:11:23 +0000 (12:11 -0400)]
Bug 10201 [Follow-up] Old OPAC patron update system should be removed
The previous patch missed removal of one template, kohaerror.tt, which
was used only by opac-userupdate.pl. This patch removes it.
To test, apply the patch and search Koha source files for references to
kohaerror. There should be none.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. Updating the German po files
with this patch applied no new strings appeared.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 6 May 2013 14:56:03 +0000 (10:56 -0400)]
Bug 10201 - Old OPAC patron update system should be removed
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sun, 12 May 2013 13:46:06 +0000 (09:46 -0400)]
Merge branch 'bug_10217' into 3.14-master
Magnus Enger [Wed, 8 May 2013 10:03:48 +0000 (12:03 +0200)]
Bug 10217 - Make sure direct links to detail views work when there is no session
To reproduce:
- Make sure you do not have a session for the OPAC you will be testing
with. Delete the CGISESSID session cookie if you have one.
- Go directly to a detail view, e.g.:
/cgi-bin/koha/opac-detail.pl?biblionumber=1
- Observe the error "Can't use an undefined value as a HASH
reference at /home/magnus/scripts/kohadev/opac/opac-detail.pl line 445."
To test:
- Apply the patch
- Reload the page with the error
- You should now see the detail view of the record, as usual
Thanks to Chris Cormack who suggested the fix for this!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, confirmed patch fixes the problem.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 14:03:51 +0000 (10:03 -0400)]
Merge branch 'bug_9681' into 3.14-master
Jared Camins-Esakov [Wed, 8 May 2013 14:03:26 +0000 (10:03 -0400)]
Bug 9681: Increment version number
Database update for bug 9681 has been given version 3.11.00.301
Paul Poulain [Mon, 6 May 2013 13:06:47 +0000 (15:06 +0200)]
Bug 9681: Add some indexes in database
Some table columns should have an index to speed SQL queries :
- statistics table has only one index (used to make heavy queries for reports)
- itemtype should have an index in items and biblioitems (this is used in circulation to check the number of existing issues of a specific item type)
- issue.branchcode and issue.issuingbranch
Test plan :
- Create a new database using kohastructure.pl
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Apply update database on a master version
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Indexes created as described. No errors.
Fixing small merge conflict.
Test presence of new indexes on all affected tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 14:00:53 +0000 (10:00 -0400)]
Merge branch 'bug_10185' into 3.14-master
Julian Maurice [Mon, 6 May 2013 06:43:50 +0000 (06:43 +0000)]
Bug 10185: Add missing columns in update 3.09.00.025
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL only changes fixing an important database update.
IMPORTANT: Patches must be backported to all versions containing
the database update 3.09.00.025.
I used the test plan provided by Julian with some additions:
1/ Do a fresh 3.8 install
2/ Do some reserves
3/ Check your old_reserves table is empty
4/ Update your sources to 3.10
5/ Run updatedatabase.pl
6/ Your reserves table is now empty!
I made sure I had item level and title level holds, also
suspended holds.
I repeated the test with entries in my old_reserves table
(cancelled and filled holds) to make sure this is also still
working correctly.
Before the patch we lost all suspended holds and when the
old_reserves table was empty also all holds in general.
After the patch the reserve_id is added but the other data
in both tables is not altered.
NOTE: Adding the reserve_id first to old_reserves and then
to reserves we are missing one id in between.
old_reserves: 1,2,3
reserves: 5,6
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Julian Maurice [Fri, 3 May 2013 15:20:17 +0000 (17:20 +0200)]
Bug 10185: Fix update 3.09.00.025
It can remove all reserves from reserves table when there is no entries
in old_reserves.
This is due to @ai which is set to NULL in
SET @ai = ( SELECT MAX( reserve_id ) FROM tmp_reserves )
and reserve_id > NULL returns no results in
INSERT INTO reserves SELECT * FROM tmp_reserves WHERE reserve_id > @ai
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan and comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 13:52:28 +0000 (09:52 -0400)]
Merge branch 'bug_10156' into 3.14-master
David Cook [Wed, 8 May 2013 08:00:29 +0000 (18:00 +1000)]
Bug 10156 - Fix usr/bin/perl path for get_report_social_data.pl
Currently, the perl path for get_report_social_data.pl is "#!/bin/perl"
when it should be "#!/usr/bin/perl".
While I'm not entirely sure how to test this, rangi did mention:
23:47 (it wouldnt work on my debian install)
23:48 zsh: no such file or directory: /bin/perl
It's a pretty trivial change, so I'm not sure it needs much of a test
plan.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Before the patch "grep -r '#!/bin/perl' in the misc dir shows one file
with this line, and it is indeed get_report_social_data.pl. After the
patch there are no occurrences left.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 13:50:02 +0000 (09:50 -0400)]
Merge branch 'bug_8278' into 3.14-master
Jonathan Druart [Mon, 22 Apr 2013 14:19:01 +0000 (16:19 +0200)]
Bug 8278: build the structure with to_json instead of manually.
Test plan:
Same as previously.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 15 Apr 2013 19:09:24 +0000 (15:09 -0400)]
Bug 8278 [Follow-up] Replace YUI autocomplete in UNIMARC 210c plugin
This follow-up corrects the heading of the plugin pop-up window to match
the UNIMARC field it targets.
To test, trigger the plugin and confirm that the pop-up window refers to
210c.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Smple patch, fixes label. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Chris Cormack [Tue, 2 Apr 2013 06:48:34 +0000 (19:48 +1300)]
Bug 8278 : Follow up, fixing the permissions on cataloguing/ysearch.pl
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works. No errors.
Without patch and normal staff user, logged out
With patch, normal staff, valid output.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 8 Mar 2013 17:56:24 +0000 (12:56 -0500)]
Bug 8278 - Replace YUI autocomplete in UNIMARC 210c plugin
This plugin, for pseudo-authority-control of publisher information,
used YUI autocomplete to pull existing publisher data from the
biblioitems table. Despite its name it is not UNIMARC-specific.
It assumes publisher name data is saved in biblioitems.
This patch converts the autocomplete to jQueryUI. The search
script has been amended to return valid JSON. The template has
been modified to enable the jQueryUI autocomplete and to add
structure more consistent with other popups.
To test, link the publisher name field in your MARC structure to
the unimarc_field_210c_bis.pl plugin. Open a MARC record for
editing and click the "tag editor" link to launch the plugin.
Type the first few letters of a publisher which exists in your
database. You should get an autocomplete menu of publishers
which match your search. Select one and click the "choose"
button to fill the field in the MARC editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described. No errors.
Test: link 260b to plugin. Edit record and search first letters
of present editors. Menú appears and can select and fill value.
Why plugin 210c_bis talk about field 225a?
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Plugin now works correctly for me, even when linked
to 260$b in a MARC21 installation. All tests and QA script
pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 13:47:44 +0000 (09:47 -0400)]
Merge branch 'bug_10204' into 3.14-master
Owen Leonard [Mon, 6 May 2013 16:29:01 +0000 (12:29 -0400)]
Bug 10204 - Patron image no longer appears in the OPAC
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 8 May 2013 13:44:29 +0000 (09:44 -0400)]
Merge branch 'bug_9961' into 3.14-master
Jared Camins-Esakov [Thu, 2 May 2013 15:53:36 +0000 (11:53 -0400)]
Bug 9961: Add truncation support to QP driver
The original implementation of QueryParser did not handle truncation
based on the QueryAutoTruncate system preference. This patch adds support.
To test:
1) Apply patch.
2) Turn on UseQueryParser.
3) Set QueryAutoTruncate to "automatically."
4) Search for "har". Note that it returns results with words
like "Harry" (i.e. with right truncation).
5) Search for "har*". Note that it still returns results with right
truncation.
6) Set QueryAutoTruncate to "only when * is added."
7) Search for "har". Note that it returns only records that have the
exact word "har" in them (most likely there will be none unless you
have Hebrew items).
8) Search for "har*". Note that once again it returns results for "Harry"
(i.e. right truncated results).
9) Sign off.
This patch also reindents a hash in Koha/QueryParser/Driver/PQF.pm
because it was hard to read before.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Thx for fixing this Jared!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Mon, 6 May 2013 12:54:25 +0000 (08:54 -0400)]
Merge branch 'master' of git://git.koha-community.org/koha into 3.14-master
Jared Camins-Esakov [Mon, 6 May 2013 12:50:15 +0000 (08:50 -0400)]
Merge branch 'bug_8896' into 3.14-master
Marcel de Rooy [Thu, 11 Apr 2013 10:48:26 +0000 (12:48 +0200)]
Bug 8896 QA Followup for regex
Making sure that the regex does not kill more than it should.
Amended: does now only look at separating colons(;) not commas(,).
Amended: two index expressions in direct context replaced by same regex for
consistency.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Lyon3 Team [Mon, 8 Apr 2013 09:14:09 +0000 (11:14 +0200)]
Bug 8896: Delete serials no more missing from missinglist
When manual history is disabled in subscription history section
if a serial has been previously set as missing and is received
or set as expected, late or claimed, it will be deleted from missinglist
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Regex needs a followup. More comments on Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Mon, 6 May 2013 12:38:33 +0000 (08:38 -0400)]
Merge branch 'bug_10166' into 3.14-master
Jared Camins-Esakov [Mon, 6 May 2013 12:35:00 +0000 (08:35 -0400)]
Bug 10166: Increment holdable counter
The $anyholdable variable was set to 0 or 1. However, as it is set in
a loop, and future changes to the opac-reserve.pl script may require
knowing how many items the patron is going to place a hold on, it makes
more sense to treat $anyholdable as a counter. This follow up turns it
into one.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Wed, 1 May 2013 18:22:50 +0000 (14:22 -0400)]
Bug 10166 - Can't place holds on multiple titles if one or more are un-holdable
opac-reserve.pl tries to check whether all selected titles in a
multiple-hold batch are unavailable to be placed on hold. However, the
logic is flawed in such a way that if the last item in the batch cannot
be placed on hold the script assumes none can be placed on hold.
This patch modifies the way the script tracks the "no titles available
for holds" variable in order to correct the error.
To test, place multiple holds by selecting titles from a list of search
results. Test three conditions:
- All titles are available to be placed on hold
You should see no onscreen warnings, and all titles should be
selectable on the place hold screen. A "Place hold" button should
appear at the bottom.
- Some titles can be placed on hold, some cannot
The titles which can be placed on hold should be selectable.
Titles which cannot be placed on hold should show a warning
message. A "Place hold" button should appear at the bottom.
- No titles can be placed on hold
"Sorry, none of these items can be placed on hold." should appear at
the top of the page. All titles should appear with warning messages.
There should be no "Place hold" button.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Mon, 6 May 2013 12:24:59 +0000 (08:24 -0400)]
Merge branch 'bug_10183' into 3.14-master
Jonathan Druart [Fri, 3 May 2013 12:37:46 +0000 (14:37 +0200)]
Bug 10183: Remove single pixel on the serials collection page
Test plan:
Go on the serials collection page
Check that the single pixels before and after the table have
disappeared.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pixels are removed, table functions work as before.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Mon, 6 May 2013 12:22:39 +0000 (08:22 -0400)]
Merge branch 'bug_10176' into 3.14-master
Karam Qubsi [Sat, 4 May 2013 20:44:57 +0000 (23:44 +0300)]
Bug 10176: Solve the Invalid URLs in 'Refine Search Results' when it uses UNICODE symbols
I just add use utf8; to the Search.pm and the problem
was solved .
Test plan :
1- Add bib records with non-latin characters
2- search for some of these records
3- try to refine your search using Subject / Author
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work fixing URLs in facets. Now they work correctly.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I tested facets with the 22 Arabic records provided on
bug 9579 successfully. Before the patch the links are not
correct, after applying the patch the links work as
expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Galen Charlton [Fri, 3 May 2013 14:58:50 +0000 (07:58 -0700)]
Complete revert of 6554
One line wasn't caught by the initial revert. Thanks to
Jonathan Druart for catching this.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Fri, 19 Apr 2013 18:14:17 +0000 (15:14 -0300)]
Bug 10084 - YUI path wrong in CCSR theme with packages
Bug 9052 fixed this for prog, CCSR was left aline in the dark (it's friday).
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Worked fine in my test package, good work Tomas
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tomas Cohen Arazi [Mon, 29 Apr 2013 15:29:40 +0000 (12:29 -0300)]
Bug 10150 - koha-email-disable error handling
koha-email-disable now
- Checks the instance exists.
- Checks if email is already disabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jared Camins-Esakov [Thu, 2 May 2013 03:06:54 +0000 (23:06 -0400)]
Increment version for 3.12.0-beta3 release
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Thu, 2 May 2013 03:04:49 +0000 (23:04 -0400)]
Add release notes for 3.12.0-beta3
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Thu, 2 May 2013 02:58:41 +0000 (22:58 -0400)]
Merge branch 'bug_10044' into 3.14-master
Jonathan Druart [Fri, 26 Apr 2013 11:59:18 +0000 (13:59 +0200)]
Bug 10044: Remove duplicate pagination on the pending orders page.
Test plan:
Check that there is just one pagination on the pending orders page.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works and deletes the old pagination that was replaced by
datatables.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Thu, 2 May 2013 02:28:32 +0000 (22:28 -0400)]
Merge branch 'deb_scripts_312beta3' into 3.14-master
Magnus Enger [Tue, 5 Mar 2013 12:49:11 +0000 (13:49 +0100)]
Bug 9250 - Followup to add koha-*-sip commands to koha-common.xml
The original patch for Bug 9250 did not add the new commands to
debian/docs/koha-common.xml, which functions as a sort of table
of contents for the real commands. This patch adds them.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Simple documentation patch
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Robin Sheat [Mon, 10 Dec 2012 05:57:04 +0000 (18:57 +1300)]
Bug 9250 - [SIGNED-OFF] provide commands to manage the SIP server
This adds commands required to control the SIP server. These commands
are:
* koha-enable-sip - copies the SIP config to the sites directory
* koha-start-sip - starts the SIP server processes
* koha-stop-sip - stops the SIP server processes
It also calls these as appropriate from the koha-common init script.
To use:
1) sudo koha-enable-sip instancename
2) sudo vim /etc/koha/sites/instancename/SIPconfig.xml
Do whatever is needed for your site's SIP configuration
3) sudo koha-start-sip instancename
To test:
1) Build packages with this patch
2) Ensure that sudo koha-start-sip instancename doesn't do anything
3) Run sudo koha-enable-sip instancename
4) Edit /etc/koha/sites/instancename/SIPconfig.xml if needed (probably
not required for testing)
5) Run sudo koha-start-sip instancename
6) Note that the sip processes are now running
7) Run sudo koha-stop-sip instancename
8) Note that the sip processes have gone
9) Reboot your Koha server
10) Note that the sip processes are back
Sponsored-By: Waitaki District Council Libraries
Sponsored-By: South Taranaki District Council Libraries
Sponsored-By: Horowhenua District Council Libraries
Sponsored-By: Rangitikei District Council Libraries
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. koha-start-sip without a prior koha-enable-sip
does nothing. koha-enable-sip copies the SIP config file to the
instance directory. After koha-enable-sip, koha-start-sip and
koha-stop-sip works as expected. After a reboot, the SIP processes are
still running. I have not actually tested the SIP servers after they
have been started, but assume they work the same as always.
The man pages look good.
The new commands should also have been added to the man page for
koha-common. I'll do a followup for that.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Sun, 14 Apr 2013 00:10:33 +0000 (21:10 -0300)]
Bug 10041 - Provide a koha-translate script to aid package users on installing translations
Until we have solved the packaging of koha template translations, provide a command that manages the installed translations in a proper way.
To test, build a Debian package of current master+the patches from this bug :-D and try the many options running koha-translate --help provide.
The command itself can be grabbed from a git checkout with this patch applied to test the script's funcionality. If it (and its docs) fits the package building stuff, I'll test on monday when I can be back on my workstation.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Good adition. Work as described. No errors.
Copied to /usr/local/bin. No errors on install, update, remove, list and check.
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Mon, 29 Apr 2013 18:18:17 +0000 (15:18 -0300)]
Bug 10101 - Follwup: fix param check
As Mason noted, there was an error on that line.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Tue, 23 Apr 2013 14:03:44 +0000 (11:03 -0300)]
Bug 10101 - make koha-enable more robust
koha-enable now:
- checks for the existence of the instance before any other action on it.
- checks if the instance is already enabled before changing stuff in the config files.
- only reloads apache if it is needed!
- handles more than one instance name as parameter (the code was there, a check for the cardinality of the args prevented it from working).
- documents this behaviour change in the docs
- doesn't break if the provided (invalid) instance name is a prefix/suffix of a real one (added -x to the relevant grep command).
To test:
- Aplpy the patch, build your packages
- Run koha-enable on
- Non existent instance (try using a prefix or a suffix of an already created one too).
- Already enabled existent instance name.
- Disabled instance.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Mon, 29 Apr 2013 18:22:09 +0000 (15:22 -0300)]
Bug 10104 - Followup: fix param check
As noted by Mason on bug 10101, the check was not working for zero arguments.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Tue, 23 Apr 2013 16:29:02 +0000 (13:29 -0300)]
Bug 10104 - make koha-disable more robust
koha-disable now:
- checks for the existence of the instance before any actions on it.
- checks if the instance is already disabled before touching anything (warns otherwise)
- only reloads apache if needed
- handles more than one instance name.
- changed the docs to acknowledge the previous item.
To test:
- Apply the patch, build your package
- Run koha-disable on
- Non existent instance (try names that are prefix and suffix of a valid one too please)
- Already disabled instance name.
- Enabled instance name.
It should work as expected and warn the user on the expected wrong cases.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Mon, 29 Apr 2013 13:30:08 +0000 (10:30 -0300)]
Bug 10144 - koha-start-zebra error handling
koha-start-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tomas Cohen Arazi [Mon, 29 Apr 2013 14:54:27 +0000 (11:54 -0300)]
Bug 10149 - koha-restart-zebra error handling (rewording)
koha-restart-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit:
- changed some wording problems.
- fixed an error in parameter validation
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Galen Charlton [Wed, 1 May 2013 18:22:30 +0000 (11:22 -0700)]
Merge remote branch 'origin/new/bug6554_reverts'
Jared Camins-Esakov [Wed, 1 May 2013 12:44:16 +0000 (08:44 -0400)]
Merge branch 'bug_6506' into 3.14-master
Peter Crellan Kelly [Tue, 9 Apr 2013 19:22:41 +0000 (07:22 +1200)]
Bug 6506: Correct CSS class name.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Peter Crellan Kelly [Thu, 28 Mar 2013 08:00:47 +0000 (21:00 +1300)]
Bug 6506: When AnonymousPatron not set, deletion of issue history silently failed.
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jonathan Druart [Tue, 9 Apr 2013 10:08:56 +0000 (12:08 +0200)]
Bug 6506: Followup add warning in the system information tab.
Add a warning in the system information tab of the about page.
Test plan:
Set OPACPrivacy = 1 and AnonymousPatron = 0 and go on the about page,
tab 'system information'. Check that the warning appears.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 12:22:39 +0000 (08:22 -0400)]
Merge branch 'bug_7228' into 3.14-master
Christophe Croullebois [Thu, 18 Apr 2013 10:55:18 +0000 (12:55 +0200)]
Bug 7228: can't add items in an order with Modify
We have a message if we want to add items and we can't add, substract only.
It's ok if we choose to create items on ordering, in this case koha can't add items, just substract
and in this case we have to delete manually the items(s) in the catalog.
But if via the syspref AcqCreateItem we choose to create items when receiving this limitation is not usefull
The patch just checks if the syspref AcqCreateItem is on 'ordering'
if not the message is not shown and we can add items
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Here is the test I made for signing off :
after applying the patch
- syspref AcqCreateItem : create items on RECEIVING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on CATALOGING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on ORDERING
- in a basket, create an order (click on "add" to add an item => quantity = 1)
- save the order
- reopen the order
- try to change the quantity (2 instead of 1), without clicking on "add" to create a new item => you cannot (alert message)
=> the behavior is the same as before the patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Copied test plan from bug report.
Template only change deactivating the Javascript that blocks
you from changing the quantity when AcqCreateItem is set to
something else than 'ordering'.
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 12:17:06 +0000 (08:17 -0400)]
Merge branch 'bug_10033' into 3.14-master
Fridolyn SOMERS [Fri, 12 Apr 2013 15:24:17 +0000 (17:24 +0200)]
Bug 10033 - dangerous query in _koha_modify_item
The SQL query build in C4::Items::_koha_modify_item performs an update on a row of items table identified by itemnumber.
Actually the query is build using a hash of datas :
for my $key ( keys %$item ) {
$query.="$key=?,";
push @bind, $item->{$key};
}
But this hash contains 'itemnumber' key, so you get an update including the primary key.
It is actually harmless but may be dangerous.
This patch simply skips itemnumber key in above loop.
Test plan :
Check you can create and modify items.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 12:15:00 +0000 (08:15 -0400)]
Merge branch 'bug_8419' into 3.14-master
Kyle M Hall [Mon, 15 Apr 2013 12:39:26 +0000 (08:39 -0400)]
Bug 8419 - Suspended holds appear on the daily holds queue
This bug was reintroduced by the patch for bu 5911: Transport Cost Matrix
Test Plan:
1) Place a hold on a record
2) Run build_holds_queue.pl
3) Verify the hold is showing in the holds queue
4) Suspend the hold
5) Re-run build_holds_queue.pl
6) Note the hold is still in the holds queue
7) Apply patch
8) Re-run build_holds_queue.pl
9) Note the hold is no longer in the holds queue
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:58:41 +0000 (07:58 -0400)]
Merge branch 'bug_7368' into 3.14-master
Marcel de Rooy [Mon, 29 Apr 2013 13:43:31 +0000 (15:43 +0200)]
Bug 7368: Small typo in history.txt
beomes becomes becomes :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes a typo in a text file, no problems found.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:57:19 +0000 (07:57 -0400)]
Merge branch 'bug_8300' into 3.14-master
Magnus Enger [Wed, 20 Mar 2013 13:22:51 +0000 (14:22 +0100)]
Bug 8300 - Add Test::WWW::Mechanize as an optional dependency
This patch replaces an earlier patch by Marcel de Rooy, which
had become outdated because lots of new dependencies were
added since the patch was made.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Sat, 23 Jun 2012 20:55:43 +0000 (16:55 -0400)]
Bug 8300: Add mechanized unit test for batch import
This new unit test confirms that importing records via the Stage
MARC import tool still works by connecting to a Koha instance and
importing a record then reverting the import, checking at each step
of the way that everything is as it should be.
To test:
1. Install Test::WWW::Mechanize
> sudo apt-get install libtest-www-mechanize-perl
2. Set environment variables to reflect your Koha instance:
> export KOHA_USER=kohaadmin
> export KOHA_PASS=katikoan
> export KOHA_INTRANET_URL=http://localhost:8080
> export KOHA_OPAC_URL=http://localhost
3. Run the test:
> prove t/db_dependent/www/batch.t
This updated patch now handles both MARC21 and UNIMARC installations.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All tests pass with marcflavour = MARC21 and NORMARC. Test #15 fails
when marcflavour = UNIMARC, but from what I can see, that is because
I'm testing on a MARC21 setup, missing the UNIMARC frameworks etc.
I'm signing off - QA folks, please ask for a proper UNIMARC signoff
if you feel it is needed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Load the POSIX module (for the floor routine).
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:47:56 +0000 (07:47 -0400)]
Merge branch 'bug_7054' into 3.14-master
Magnus Enger [Mon, 15 Apr 2013 17:02:46 +0000 (19:02 +0200)]
Bug 7054 - NORMARC: Fix default for 000 position 17
Someone at the library education in Oslo told me that it would be
better to have the default for 000/17 set to 1, instead of 2 as it
is today.
To reproduce:
- Run through the Web-installer in Norwegian and choose NORMARC as
the MARC dialect
- Go to Home > Cataloging > Add MARC record and start to add a new
record
- Click in the 000 field and it should be filled with:
" nam a22 2 4500"
- Reload the page, then open the value builder for 000 and click on OK
- 000 should get filled with the same string as above
To test:
- Apply the patch and repeat the steps from above. The default value
for 000 should now be:
" nam a22 1 4500"
(Don't be confused by the 1s and the 2s. A value of 1 in position 17
means "level 2", and a value of 2 means "level 1" - that is how it
is defined in the "standard":
1 = Nivå 2, iflg. Katalogiseringsregler
2 = Nivå 1, iflg. Katalogiseringsregler)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small changes. Didn't test in a NORMARC installaton, but
trusting Magnus with this and seeing no reason why it
shouldn't work.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:45:23 +0000 (07:45 -0400)]
Merge branch 'bug_7055' into 3.14-master
Magnus Enger [Mon, 15 Apr 2013 17:50:19 +0000 (19:50 +0200)]
Bug 7055 - NORMARC: Fix 008 position 15-17 and 35-37
This patch does several things:
- Set the default for 008/15-17 to "no " (yes, there is space at the end)
- Link from 008/15-17 in the value builder to NORMARC country codes
- Set the default for 008/35-37 to "nor" (by setting the
DefaultLanguageField008 syspref)
- Link from 008/35-37 in the value builder to NORMARC language codes
- Fix a missing <tr> around field 35-37
To reproduce:
- Run through the Web-installer in Norwegian and choose NORMARC as
the MARC flavour
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t xxu||||| |||| 00| 0 eng d
^^^ ^^^
- Reload the page and open the value builder for 008. Problems:
- The text for 15-17 links to MARC21 country codes
- The default for 15-17 is xxu
- The text for 35-37 links to MARC21 language codes
- The default for 35-37 is eng
- If you choose e.g. "Monografier" in the top dropdown then click
on "OK" the window does not close
To test:
- Apply the patch and run through the Web-installer again, selecting
Norwegian and NORMARC
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t no ||||| |||| 00| 0 nor d
^^^ ^^^
- Reload the page and open the value builder for 008.
- Check that...
- The default for 15-17 is "no " (with a space at the end)
- The link goes to NORMARC country codes
- The default for 35-37 is "nor"
- The link goes to NORMARC language codes
- Select something from the top dropdown and click "OK". Check that the
window closes and that the values that are entered into the 008 field
matches what you chose in the popup window.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusing Magnus is right, so testing for any regressions mainly, all good
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only changes NORMARC specific plugin and system preferences
files. Changes all seem logical to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:37:30 +0000 (07:37 -0400)]
Merge branch 'bug_10053' into 3.14-master
Jonathan Druart [Mon, 15 Apr 2013 12:27:46 +0000 (14:27 +0200)]
Bug 10053: borrowers.branchcode cannot be null
The DB field borrowers.branchcode cannot be null (`branchcode`
varchar(10) NOT NULL default ''). However, an empty value can be selected
on creating/updating a patron.
Test plan:
- Add or edit a patron and choose the empty value for library
(branchcode).
- Save (pref BorrowerMandatoryField must not contain branchcode).
- Mysql raises an error.
- Apply the path.
- Check that you are not able to select no library.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:34:22 +0000 (07:34 -0400)]
Merge branch 'bug_10097' into 3.14-master
David Cook [Tue, 23 Apr 2013 02:58:19 +0000 (12:58 +1000)]
Bug 10097 - Hide framework selection when importing staged authority records
Currently, when importing authority records using the "Manage staged
MARC records" tool, it will show the text "Add new bibliographic records
into this framework:" followed by a drop-down menu of possible frameworks.
Since these are bibliographic frameworks and we're importing authority
records which do not use them, we have no need to show this information.
I'm proposing just a little patch to display this info only for
bibliographic records. From my tests, everything seems to work fine
without this text and the drop-down, although I've only uploaded one
MARC21 authority record at a time.
--
Test Plan:
Before applying patch...
1) Find yourself an authority record. I recommend downloading your
favourite author from: http://authorities.loc.gov/
2) Stage MARC for import. Choose "Authority" as your record type.
3) Go to "Manage staged records"
4) Underneath the button "Import this batch into the catalog", you
should see the text "Add new bibliographic records into this framework:"
followed by a drop-down of the available frameworks.
Optionally) You can also try this for bibliographic records. You'll find
the same.
After applying the patch...
5) Repeat steps 2 and 3.
6) Underneath the button "Import this batch into the catalog", you
should just see a table listing your MARC record(s).
7) Stage MARC for import. Choose "Bibliographic" as your record type.
8) Go to "Manage staged records".
9) You should find step 4 still to be true (i.e. the "Add new
bibliographic..." text should still be there).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:27:04 +0000 (07:27 -0400)]
Merge branch 'bug_9719' into 3.14-master
Kyle M Hall [Wed, 27 Feb 2013 13:46:56 +0000 (08:46 -0500)]
Bug 9719 - Changing the rows per page on a custom report fails if it has user supplied parameters
If you create an SQL report that includes one or more parameters,
using the 'rows per page' pulldown does not work. Instead, it will
prompt for the parameters again and shows the first page of output.
Test Plan:
1) Create a new report from sql as follows:
SELECT * FROM borrowers WHERE surname LIKE <<Last Name>> AND firstname LIKE <<First Name>>
2) Run this report
3) Change the 'Rows per page' and click 'Update'
4) This should kick you back to the start where the report asks you for your parameters
5) Apply the patch
6) Repeat step 3, this time is should work correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely now. All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:22:31 +0000 (07:22 -0400)]
Merge branch 'bug_9957' into 3.14-master
Owen Leonard [Tue, 30 Apr 2013 18:39:48 +0000 (14:39 -0400)]
Bug 9957 - Missing cancel link on subfield editing page
The subfield edit page has an edit bottom at the top of the page. Almost
no other edit screens do this. It would be more consistent to put it at
the bottom. Also missing is a "cancel" link. This patch fixes both
issues.
The patch also adds "Default" to the breadcrumbs when editing a subfield
in the default framework.
To test, apply the patch and edit a subfield: MARC frameworks -> MARC
structure -> Subfields -> Edit. The "Save changes" button should appear
at the bottom of the page alonside a "Cancel" link. Both should work
correctly.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, improves consistency and works
nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:19:26 +0000 (07:19 -0400)]
Merge branch 'bug_9266' into 3.14-master
Owen Leonard [Fri, 26 Apr 2013 18:20:49 +0000 (14:20 -0400)]
Bug 9266 - Untranslated strings in tags moderation
There are a couple of English strings in tags moderation JavaScript
which are not properly enclosed in the _() function enabling
translation. As a result, clicking a translated 'Approve' or
'Reject' button in the table of tags would change the button's
neighbor's label to the English string. This patch
corrects it.
To test, apply the patch and regenerate a translation to test with. Go
to Tools -> Tags and find a list of tags to moderate (pending, approved,
or rejected). When you click on an 'Approve' or 'Reject' tag in the
table of tags, the buttons in each Approve/Reject pair should retain
their correct translated label. For instance, looking at approved tags
in French:
[ Approuvé ] [ Rejeter ]
Clicking the "Rejetee" button should change the state to:
[ Approuver ] [ Rejetée ]
Clicking "Approuver" should return the buttons to the first state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:15:00 +0000 (07:15 -0400)]
Merge branch 'bug_7143' into 3.14-master
Jared Camins-Esakov [Wed, 1 May 2013 11:14:44 +0000 (07:14 -0400)]
Bug 7143: Add missing contributor to about page
D Ruth Bavousett [Tue, 22 Jan 2013 18:44:33 +0000 (15:44 -0300)]
Bug 7143: Updating the About page with translation teams for Basque and Turkish
Text-change only, should require little QA and testing.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, changes look correct to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Marcel de Rooy [Mon, 29 Apr 2013 14:02:29 +0000 (16:02 +0200)]
Bug 7143 Followup for some new developers on about page
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only - changes look correct to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 11:09:25 +0000 (07:09 -0400)]
Merge branch 'bug_10111' into 3.14-master
Owen Leonard [Thu, 25 Apr 2013 13:34:17 +0000 (09:34 -0400)]
Bug 10111 - Layout on basket summary page a bit inconsistent
Some details in the summary of basket information were not marked up
consistently with others on the page. This patch makes the markup
consistent for a consistent appearance.
To test, view a basket in Acquisitions which is part of a basketgroup.
Information should be displayed consistently for baksets in both open
and closed basket groups.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works as expected
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, works nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jared Camins-Esakov [Wed, 1 May 2013 10:55:44 +0000 (06:55 -0400)]
Merge branch 'bug_6709' into 3.14-master
Bernardo Gonzalez Kriegel [Mon, 29 Apr 2013 16:07:11 +0000 (13:07 -0300)]
Bug 6709 - marc21_field_006.xml and marc21_field_008.xml can't be translated
This patch changes
1) structure and schema for xml files used in MARC21
006 and 008 value builders.
2) JavaScript functions used to show value builders.
Xml processing is enabled in previous patch
Any translatable string has been moved to an xml element,
those strings that no need translation remains as xml
attributes.
NOTE_1: I do not include as translatable material types
codes, because those values are restricted in schema
definition. But this restriction can be removed.
NOTE_2: Anyone with experience in XML/XSD please
check the new schema definition.
NOTE_3: Anyone with experience in the former and
JavaScript please check xmlControlfield.js
To test:
1) Apply the patch
2) Verify that 006 and 008 value builders show and work
properly
3) Update translation files for your favorite language,
a new set of strings must show up corresponding to
names and descriptions on value builders.
Note: messed up patches, sending again.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Did regression tests on the plugins for 006 and 008 and could
spot no differences in behavior of the plugins to before.
Also tested the translation process and found it working nicely.
Thank you for fixing this long standing translation bug!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Chris Cormack [Sun, 8 Apr 2012 08:10:19 +0000 (20:10 +1200)]
Bug 6709 : Patch for testing translating .xml files
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>