Fridolyn SOMERS [Thu, 28 Feb 2013 09:04:17 +0000 (10:04 +0100)]
Bug 9726: XISBN service throttle not initialized
For limiting XISBN API use, XISBNDailyLimit syspref is used to compare
with daily use count of the API. This count is stored in
services_throttle table. But this table content is never initialized,
not in installer nor in updatedatabase. So count is never increased and
API is used without limit.
This patch add an insert of service type in services_throttle if not
existing. So service throttle will be initialized.
Test plan :
- Check that you don't have a line in services_throttle for
service_type=xisbn
- Activate FRBRizeEditions and XISBN sysprefs
- Set a small number in XISBNDailyLimit (ie 5)
- Go to a biblio page (with ISBN)
- Look at services_throttle table
=> you should have a line for service_type=xisbn with service_count=1.
- Refresh biblio page untill limit is reached
=> service_count should be equal to limit for service_type=xisbn
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passes test plan correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Fixes problem, tested according to test plan. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 9885 Passwords generated by command line scripts are weak
This changes the scripts so that:
- in koha-create, the zebra password and mysql passwords are set to 16 character "secure" passwords, ie generated with pwgen -s 16 1
- the patron password is set to a 12 character "memorable" password.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Looks good. I did not actually build, install and test new packages,
but i did test pwgen with the new arguments and the changes make
sense.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
QA signoff Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
David Cook [Wed, 31 Oct 2012 21:17:08 +0000 (08:17 +1100)]
Bug 9002 - Remove Problematic Logic from Patron Messaging Preferences Form
If you do not have SMSSendDriver set and you do not have a message_transport_type of "sms", you will get an extra table column filled with a hyphen "-" and no corresponding table heading in the Patron Messaging Preferences table.
This pushes the table out of alignment so the email checkbox goes under "Digests Only?", the digests checkbox goes under "Do not notify", and the Do not notify checkbox is pushed to the side with no heading.
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested for regressions.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fridolyn SOMERS [Wed, 12 Dec 2012 14:47:55 +0000 (15:47 +0100)]
Bug 9274: Software error in bibtex export
Exporting to Bibtex from OPAC returns a software error.
This is because call to C4::Biblio::GetMarcAuthors does
not return only authors but also authority link.
This patch replaces this call by a direct read of
MARC::Record, like for other Bibtex datas.
C4::Biblio::GetMarcAuthors is really destinated to a
direct use in a template.
Also, actually all author subfields are joined with
'and'. According to Bibtext format, authors should be
"firstname surname and ..." or "surname, firstname and
...". I have choosen second one because in non-UNIMARC
it corresponds to $a content.
For example UNIMARC :
700 $aDoe $bJohn
700 $aDoe $bJanne
Gives : Doe, John and Doe, Janne
For example MARC21 :
700 $aDoe, John
700 $aDoe, Janne
Gives : Doe, John and Doe, Janne
Test plan :
Without patch :
Exporting to Bibtex from OPAC returns a software error.
With patch :
Exporting to Bibtex from OPAC succeeds.
Authors are composed using : $a, $b and ... for UNIMARC, $a ... for other marc flavours.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as decribed. All record export that produces
error pre-patch, now export without error.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes error and output of additional authors.
Main entry in 100 is still missing.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Aaron Wells [Mon, 25 Mar 2013 04:24:59 +0000 (17:24 +1300)]
Bug 8816: Add warning about manual edits to top of debian/control
And we need to add it to control.in as well, because control is
created from control.in (which is the whole point of the warning ;)
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds comments with a warning. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Karam Qubsi [Sat, 30 Mar 2013 18:43:44 +0000 (21:43 +0300)]
Bug 9956 : Add translators to the about page
Hi all this patch is adding the translators for Arabic version. Thanks a lot . Karam Qubsi
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, looks fine. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 9932 - Broken calendar image and misplaced masthead include for CCSR theme
Test Plan:
1) Enable CCSR theme
2) View opac-reserve.pl
3) Note the misplaced background and the broken calendar images
4) Apply the patch
5) Note the background and images now display correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Corrects path to calendar icon. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Thu, 28 Mar 2013 14:37:26 +0000 (15:37 +0100)]
Bug 9945: Changed display: inline to inline-block on the inline CSS styling on the li elements.
When adding/modifying an authorised values.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves icon set display in authorised value configuration.
CSS only. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fridolyn SOMERS [Fri, 29 Mar 2013 12:08:05 +0000 (13:08 +0100)]
Bug 9953 - When OpacMaintenance breaks lifting debarment
When OpacMaintenance is on, any opac page will redirect to maintenance.pl.
Some pages of intranet have the same behavior and you get 404 error.
This is because in checkauth, if type arg is undefined it is "opac" by default.
This patch adds type arg in all intranet calls of checkauth.
Test plan :
- Set syspref OpacMaintenance=Show
- Go to a borrower page
- Click on "Fines" and "Create manual invoice"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Click on "Fines" and "Create manual credit"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Restricted" to yes and save
- Click on "Lift restriction" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Expiry date" to a day in the past and save
- Click on "Renew" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Good catch, a tricky bug.
http://bugs.koha-community.org/show_bug.cgi?id=9952
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed a few tabs from mancredit.
All tests and QA script pass now.
Good test plan. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Liz Rea [Mon, 4 Mar 2013 22:39:54 +0000 (11:39 +1300)]
Bug 9745 - don't nuke translated strings in permissions on DB upgrade
To test:
(this is best done by someone who has a database with translated
strings for user permissions - I'm looking towards Katrin. :))
Get a 3.6-3.8 era database loaded as test data - also please use
a low value test database.
Translate or change the strings in the database for the user
permissions that follow in mysql client (for those who didn't
install with a different language that has translated files
at install time) -
update userflags set flagdesc="Translated text 1" where flag
IN('catalogue','editauthorities','reports','management','serials',
'updatecharges','circulate','parameters','borrowers','tools',
'staffaccess','edit_patrons');
(you will notice that this changes all of the permission labels
in the interface to "translated text 1" for the affected
permission flags. This is why I don't want you to use a high
value test database.)
Update that to master + this patch - your "translations"
should be intact.
Blow that database away, and make a brand new one 3.6-3.8 era
with the english database definitions. Run the update again with
this patch, the strings should be updated correctly.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
There was a typo in the patch, the first database update had to be
changed from this: $dbh->do{(q{ to this: $dbh->do(q{
* Test 1:
- git checkout v3.06.05
- Run through the web installer in Norwegian, installing all
Norwegian sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- Almost all of the permissions are still in Norwegian. The ones
that are in English are not touched by the database update for
3.11.00.016, so they must have been introduced by other updates.
* Test 2:
- git checkout v3.06.05
- Run through the web installer in English, installing all English
sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- All permissions have been updated as expected, except "Perform
batch modification of patrons" which is not in the 'userflags'
table, but in the 'permissions' table. I have amended the patch
to account for this.
Two fixes to the original patch, please give a shout if this
makes a second signoff necessary!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I tested this on an English and a German sample base updating
from 3.06.07 successfully.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected incorrect field names in the last query (it's
permissions.description not permissions.flagdesc).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
David Cook [Wed, 31 Oct 2012 22:26:41 +0000 (09:26 +1100)]
Bug 9003 - Add css fix for opac items with strong and em
Currently, if you have nested strong and em tags in the opac, you will only get the properties of the inner tag. This seems to be due to reset-fonts-grids.css resetting the font weight and style (for both strong and em) to normal.
So if you have strong as your outer tag and em as your inner tag, you'll have italics but no bold.
To test:
Before applying the patch...
1) Put <em> and <strong> tags around some text in the opacnav, opac news, opacheader, or any other area of the opac where you can enter html text.
2) Look at the opac and notice that only the inner tag styles are being applied to the text
Apply the patch
3) Refresh the opac (you may need to bypass or clear your browser cache for the new style to pick up)
4) Note that both the inner and outer <em> and <strong> tags are being applied to the text (i.e. your text should be bold and italicized)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Small change that works. No errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Thu, 17 Jan 2013 15:52:18 +0000 (16:52 +0100)]
Bug 9419: The highlight feature can cause a browser freeze
Test plan:
- switch on the OpacHighlightedWords syspref
- search at the opac and intranet a string with a space (e.g.
au,wrdl:"Shakespeare, William" note the double space after the comma)
- without the patch your browser will be frozen during a few seconds,
after applying it, the highlight works better.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Mon, 25 Mar 2013 13:34:33 +0000 (09:34 -0400)]
Bug 9922 - holds queue shows home library with AutomaticReturn
Test Plan:
1) Enable AutomaticItemReturn
2) Place a reserve on a record where the holding and home branches differ
for the available items
3) Rebuild the holds queue
4) Check the holds queue, verify the item is listed in the items to pull for the item's home branch
5) Disable AutomaticItemReturn
6) Rebuild the holds queue
7) Verify the item is listed in the items to pull for the item's holding branch
8) Enable AutomaticItemReturn
9) Apply patch
10) Rebuild the holds queue
11) Verify the item is listed in the items to pull for the item's holding branch
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested per plan, and the patch seems sane. Functionality of the hold queue is restored to previous behaviour.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amended test plan to make clear it has to be a record level
hold for the test plan to work.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Wed, 27 Mar 2013 10:05:06 +0000 (11:05 +0100)]
Bug 9935 - Social icons missing in CSSR theme
When using CSSR theme, opac.css is missing css rules for social networks Facebook, LinkedIn ...
This patch copies css rules related to social netxork from prog theme to cssr theme.
Also copies social-sprite.png image.
Test plan :
- Set CSSR theme : syspref opacthemes=ccsr and opaccolorstylesheet=colors.css
- Set syspref SocialNetworks=Enable
- Go to a detail page at OPAC
=> check that social links are icons : Facebook, LinkedIn, Delicious, Send by email, Google Plus and Tweeter
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Social icons now showing, thanks!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Will Stokes [Mon, 25 Mar 2013 04:07:02 +0000 (17:07 +1300)]
Bug 7938: Added description of -v/--verbose parameter
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"perldoc misc/translator/translate" looks good and now mentions
the -v option.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mason James [Tue, 19 Feb 2013 03:24:15 +0000 (16:24 +1300)]
Bug 9660 - OpenLibrary covers are too small on OPAC search results
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as advertised. OpenLibrary book cover API offers 3 cover sizes: small,
medium, and large. Switch from small to medium, for result page, with
downsizing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves display of OpenLibrary covers in OPAC result list.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Thatcher Rea [Fri, 22 Mar 2013 21:51:15 +0000 (10:51 +1300)]
Bug 9908 - Fixing OCLC Connexion Client
Fix issue where exporting a bib from the OCLC Connexion client
or web interface to a Koha database would always result in
an "Unsuccessful request" error.
To Test:
[1] Apply patch
[2] Start the Connexion import daemon.
[3] Start the Connexion client or web interface (requires that you
you posses OCLC cataloging credentials).
[4] Locate a bib and use Connexion to export it to the Koha database.
[5] Verify that the bib is successfully added.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Logical change and trusting sign off here as I don't have
access to WorldCat for testing this. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9863: Correct casing and add arrow-heads for consistency with earlier submit messages.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change to make interface a little bit more consistent.
Reran web installer to test correct behaviour. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Tue, 26 Mar 2013 12:26:54 +0000 (08:26 -0400)]
Bug 9930 - can't update patron info in ccsr
Test Plan:
1) Enable ccsr theme
2) Log into update, update personal details
3) Go to mainpage.pl in intranet
4) Note there is no alert for patron modifications
5) Apply patch
6) Repeat step 2-3
6) Note there is now an alert for patron modifications
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Passes tests, tested per test plan, no side effects noted.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Requires PatronSelfRegistration and PatronSelfRegistrationDefaultCategory
to make the form show up. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Wed, 28 Nov 2012 16:51:03 +0000 (17:51 +0100)]
Bug 8942: Translation process breaks javascript (followup 2)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested all changes. Functionality is unchanged. Thanks for the taking
the extra effort to move alert strings into variables. Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolyn SOMERS [Wed, 28 Nov 2012 15:10:09 +0000 (16:10 +0100)]
Bug 8942: Translation process breaks javascript (followup 1)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested all effected functions. No change in functionality. Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolyn SOMERS [Wed, 28 Nov 2012 14:37:22 +0000 (15:37 +0100)]
Bug 8942: Translation process breaks javascript
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested most scripts affected by this patch and visually verified
all changes. Functionality is unaffected. Signed-off-by: Mason James <mtj@kohaaloha.com>
Galen Charlton [Tue, 8 Jan 2013 00:12:57 +0000 (19:12 -0500)]
bug 9496: improve error checking in rebuild_zebra.pl
When using rebuild_zebra to index all records, skip over
bibliographic or authority records that don't come out
as valid XML. Also, strip extraneous XML declarations when
using --nosanitize.
Test plans
----------
Note that both plans assume that DOM indexing is turned on.
Test plan #1
============
[1] Run rebuild_zebra.pl with the -x -nosanitize options. Without
the patch, zebraidx should terminate early and complain
about invalid XML.
[2] With the patch, the rebuild_zebra.pl should work without
error.
Test plan #2
============
[1] Intentionally make a MARCXML record invalid, e.g, by running
the following SQL:
UPDATE bilbioitems SET marcxml = CONCATENATE(marcxml, 'junk')
WHERE biblionumber = 123;
[2] Run rebuild_zebra.pl -b -x -r
[3] Without the patch, only part of the database will be indexed.
[4] With the patch, rebuild_zebra.pl will not export the bad
record and will give an error message saying so, but will
successfully index the rest of the records.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 8378 - followup - update notices to use <<items.fine>>
Didn't break on well-formed notices, and fixed those with problems
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Conflicts:
installer/data/mysql/updatedatabase.pl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 8378 - followup - sample_notices.sql updated to <<items.fine>>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 8378 - show all items columns and new items.fine
This allows users to select any columns from items and adds new
items.fine field introduced by previous patch to user interface.
Note: This works as expected. items.fine appears as an option and gets inserted in the notice template as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 8378 - <fine> in overdues changed to <<items.fine>>
This patch reintroduces fines in overdue_notices.pl with minimal
changes to exsiting code.
It DOES changes template syntax, it used to be <fine>USD</fine> but
currency was not recalculated and used only to select format, so
now we are using active system currency because values are in it
anyway.
Example notify template:
<item>"<<biblio.title>>" by <<biblio.author>>, <<items.itemcallnumber>>,
Barcode: <<items.barcode>> Fine: <<items.fine>> </item>
If your active currency doesn't have valid ISO code this code will
fallback to sprintf with two decimal digits, and you can insert
currency symbol in template itself (currency field is not editable
through web interface, so this fallback might be useful for existing
installations).
Test scenario:
1. configure fine amount under "Circulation and fines rules"
for patron category and item type
2. checkout item with correct type to partron in correct
category with due date set to yesterday
3. verify that overdue notice uses new <<items.fine>> tag
4. run ./misc/cronjobs/fines.pl to calculate fines
5. run ./misc/cronjobs/overdue_notices.pl -n
and verify that fine amount is included
Notes: Tested using the default ODUE notice, changing:
<fines>USD</fines>
for
<<items.fine>>
Everything worked as expected with finesmode=production set.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Robin Sheat [Wed, 13 Mar 2013 02:51:37 +0000 (15:51 +1300)]
Bug 9802 - add test case to ensure man pages have correct XML
To test:
* run xt/verify-debian-docbook.t and make sure it's all OK
* modify an xml file in debian/docs, try again, make sure it fails
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
- Running "prove -v xt/verify-debian-docbook.t" loops through all the
XML files in debian/docs and reports them as being ok.
- Removing a "<" from one of the files makes the test report it as
an error
- I did not verify that the test actually trips up a package build
if there is invalid XML. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Tue, 5 Mar 2013 19:08:12 +0000 (14:08 -0500)]
Bug 9748: don't link items in SCO checkout list back to main OPAC
It appears that the conversion from HTML::Template to TT
changed noitemlinks to ISSUE.noitemlinks, hence it is being ignored.
This is a problem for SCO kiosks where all the navigation controls
are hidden. Clicking the link means leaving the SCO module and
not being able to get back.
Test plan:
1) Run SCO module, check for item links
2) Apply patch
3) Run SCO module, note that the items no longer have links
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mathieu Saby [Sat, 9 Mar 2013 16:53:03 +0000 (17:53 +0100)]
Bug 7875: Change the pending suggestion link in home page so that it directs to pending suggestions
Pending suggestion link from staff client home directs to accepted
suggestions instead of pending suggestions. This patch changes the link
so that it directs to pending suggestions.
To test :
1 - create 2 suggestions, accept 1 of them
2 - click on the link on home page
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Tue, 29 Jan 2013 17:03:02 +0000 (18:03 +0100)]
Bug 9504: URL escape in OPAC more searches
OPACSearchForTitleIn is a syspref used to add links as "more searches" in OPAC record detail page.
The links can contain vars depending on record values like title, ISBN, ...
Thoses values must be URL-escaped because they can contain special characters that will brake URL and/or HTML.
This patch add a method C4::Output::parametrized_url() that replaces vars in URL usign escape and UTF-8 encoding.
Test plan :
- Define in OPACSearchForTitleIn a link with all possible vars : TITLE, AUTHOR, ISBN, ISSN, CONTROLNUMBER, BIBLIONUMBER
- Edit a record to add special characters in title : ", &, ? ...
- Go to OPAC detail pages of this record
=> Check that URL is well encoded
=> Click on link to check the term is well encoded (diacritical characters, ...)
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Nice test plan, thanks!
Verified bug and fix - both look good. Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fridolyn SOMERS [Wed, 27 Feb 2013 10:16:24 +0000 (11:16 +0100)]
Bug 7018 : need all acq permissions to search
All acquisition module permissions are needed to allow order search (acqui/histsearch.pl).
With this patch any acquisition permission allows to order search.
Many other pages of this module have this behavior.
Test plan :
- Set for a user only one permission in acquisition module (not order_receive)
=> they also need catalogue permission to be able to log in
- Login with this user and try to perform an order search
=> you get access to page
- Set for a user no permission in acquisition module
- Login with this user and try to perform an order search
=> you do not get access to page
Signed-off-by: MJ Ray <mjr@phonecoop.coop> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected and passes tests. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Fri, 18 Jan 2013 13:32:06 +0000 (14:32 +0100)]
Bug 9423: Add notforloan value to issue confirmation or blocking message
When trying to checkout an item that is not for loan (due to
items.notforloan value or because itemtype is not for loan), you get a
confirmation or blocking message (depending on AllowNotForLoanOverride
syspref).
This message tells "Item is normally not for loan".
This patch adds some informations :
if itemtype is not for loan, tells "Item type is normally not for loan".
if item is not for loan due to items.notforloan value, adds notforloan
description to message.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works as advertised: Not for loan authorized value is correctly shown.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Thu, 17 Jan 2013 10:42:53 +0000 (11:42 +0100)]
Bug 9415: XML catalog export is missing root node
When exporting some biblio or authorities records with tools/export.pl (via web client or command-line) :
If choosing XML format, you get a concatenation of full XML records.
This patch uses MARC::File::XML to create a well formated file.
See http://search.cpan.org/~gmcharlt/MARC-XML-0.93/lib/MARC/File/XML.pm#close%28%29
Test plan:
- Go to Tools/Export data
- Enter numbers in from and to biblio number
(make sure that at least two records will
be exported).
- Select xml in file format
- Click "Export bibliographic records"
- Save file somewhere
- Look at downloaded file
=> File should look like :
<?xml version="1.0" encoding="UTF-8"?>
<collection
...
<record>
...
</record>
<record>
...
</record>
</collection>
=> "collection" is the root node and XML declaration exists only once
- Do the same for authorities export and command-line use of tools/export.pl
Second test plan:
- From the command line, run tools/export.pl, e.g.,
tools/export.pl --format=xml --filename=bibs.xml
- Verify that the output is valid XML, e.g.,
xmllint --noout bibs.xml # if the file is valid, no error messages will be displayed
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Magnus Enger [Tue, 19 Mar 2013 09:45:33 +0000 (10:45 +0100)]
Bug 9841 - Improve the link from the "logged in as mysql-user"-warning
Currently, the link from the "logged in as mysql-user"-warning goes to
add a patron in a seemingly random category code. This patch changes
the link to point to Home > Patrons, where a category for the new
patron can be chosen.
A small typo in the warning message is also corrected.
To test:
- Apply the patch
- Login as the MySQL user
- Check that the warning appears on the intranet home page
- Check that the typo in the first line is fixed: "This *is* a bad idea"
- Check that the link in the warning leads to Home > Patrons
Signed-off-by: Brendan <brendan@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All happy with this. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Colin Campbell [Wed, 27 Feb 2013 17:52:02 +0000 (17:52 +0000)]
Bug 9727: Fix typo in variable name
Variable is passed as recordtype not record_type
correct name
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
before applying the patch
$ perl -wc Koha/SearchEngine/Solr/Index.pm
Global symbol "$record_type" requires explicit package name at Koha/SearchEngine/Solr/Index.pm line 43.
Koha/SearchEngine/Solr/Index.pm had compilation errors.
after
Koha/SearchEngine/Solr/Index.pm syntax OK
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can't really test this with solr, but as various people
at the hackfest have confirmed this to be fixing the problem
I feel save to pass QA. All tests and QA script pass too. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Vitor FERNANDES [Mon, 18 Feb 2013 10:42:10 +0000 (10:42 +0000)]
Bug 9341: Problem with UNIMARC authors facets
In UNIMARC installations the authors have a double comma separating the subfield a and the subfield b.
Test plan:
- After applying the patch do a search and check the double comma in authors facets.
- Apply the patch
- Do a new search
- Check if authors facets as a double comma
Sponsored-by: KEEP SOLUTIONS Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Conflicts:
installer/data/mysql/sysprefs.sql
installer/data/mysql/updatedatabase.pl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Liz Rea [Mon, 25 Feb 2013 01:46:55 +0000 (14:46 +1300)]
Bug 8979 - simple addition of news to CCSR theme
Nothing fancy, just displays the news in the mobile view.
To test:
enable CCSR theme
ensure you have a news item that will be displayed on the home page
browse to your test site with a mobile phone - news item should be displayed (without the patch it will not be displayed)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. No errors.
Note: Perhaps 'Persona' login could be hidden in movile view. Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Magnus Enger [Tue, 5 Mar 2013 15:51:51 +0000 (16:51 +0100)]
Bug 9256 - Fix search for the packages
See the bug for a description of the problem.
This patch tries to restore searching for marcflavour != MARC21 as well as
allowing instances with different marcflavors to co-exist on the same server.
To test:
- Do a package install with e.g. the official squeeze-dev packages and create at
least two instances, with different marcflavours, e.g.:
sudo koha-create --create-db --marcflavor marc21 test1
sudo koha-create --create-db --marcflavor normarc test2
- Run through the web installers for both instances and add a couple of
records to each. Wait for the records to be indexed or run indexing manually
with
sudo koha-rebuild-zebra -f test1
sudo koha-rebuild-zebra -f test2
- Try searching for the records you added. It should work in test1 but not in
test2.
- Apply the patch and build packages with the build-git-snapshot script
- Install the new koha-common package
- Create two instances (because of Bug 9754 it is probably best to give the
instances different names than the ones you created above, or to do this on
a fresh VM or similar) and add records, as described above. Searching should
now work equally well for both instances.
Please note: Because of Bug 9752 you will have to set marcflavour = NORMARC
by hand before you do the searching, if you choose NORMARC as the marc flavour
on one of the instances you create.
Please note too: I am not confident that this is the perfect solution, so
merciless and thorough testing is necessary! ;-)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works for me for GRS-1 (package installation out of the box). Could not figure out how to set up DOM indexing and eventually stopped caring about it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Build packages with the patch and checked that creating
instances and search within them works for both MARC21 and NORMARC.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Thu, 7 Mar 2013 19:37:29 +0000 (14:37 -0500)]
Bug 9765 - Remove unused include file: budgetperiods-admin.inc
budgetperiods-admin.inc doesn't appear to be used anywhere in Koha. This
patch removes it.
To test, confirm that a search for references to budgetperiods-admin.inc
returns no results.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Tue, 12 Mar 2013 00:53:55 +0000 (20:53 -0400)]
Bug 7596 - System prefs editor JS contains untranslatable English string
There is one stray instance of an untranslatable string in
preferences.js. This patch replaces it with a variable which is now
defined in the preferences template.
To test, open the system preferences editor and change any setting. You
should see the usual "Saved preference <preference name>" message.
To test that error strings are now translatable, run "perl translate
update <lang>" from misc/translator, then check if the affected strings shows
up in the po file.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested both, all ok.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Mathieu Saby [Fri, 22 Feb 2013 11:33:48 +0000 (12:33 +0100)]
Bug 4266: Hide Encumbrance and Expenditure in aqbudgets.tt
Encumbrance and Expenditure fields are not taken into account by Koha,
but the data are saved in database.
This patch hide these fields in aqbudgets.tt
To test : check if the 2 fields are hidden when creating a new fund.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This could certainly be done in a few different ways both with CSS and
JS, but this is a simple change and can be easily overridden:
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Tue, 5 Mar 2013 21:10:19 +0000 (16:10 -0500)]
Bug 9695 - Use alphabet system preference on page used to browse patrons for patron card batches
When adding patrons to a batch for creating patron cards, the template
shows alphabet links for browsing all patrons. This patch converts the
hard-coded alphabet links to use the new alphabet system preference.
To test, go to the patron card creator and create a new batch. Click
"Add items" to pop up the window for browsing for patrons to add to the
batch. You should see a working array of alphabet letters which link to
patron search results.
Signed-off-by: David Cook <dcook@prosentient.com.au>
The patch adds consistency to the interface and works as described. Signed-off-by: Jonathan Druarth <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Mathieu Saby [Sat, 9 Mar 2013 15:15:19 +0000 (16:15 +0100)]
Bug 8853: Suppress links in basketgroups list
In the table listing all closed basketgroups, clicking the name of a
basketgroup reopen it. To edit an open basketgroup or reopen a closed
basketgroup, there are specific buttons in "Action" column. So the link
around basketgroup name is an UX problem. This patch suppress the link
around basketgroup name, in both "closed" and "open" tab.
To test :
1. create some closed and open basketgroups
2. check links are not showing anymore
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Liz Rea [Thu, 27 Dec 2012 03:10:26 +0000 (16:10 +1300)]
Bug 8054 - double clicking can cause duplicate payments/fines
Uses preventDoubleForSubmit() to prevent double form submissions in the fines module.
To test:
Create a manual invoice/fine
Create some manual fines, click save like mad - you should get only one fine (without, you will get several if you click madly enough)
Click Pay fines
Pay some fines, clicking save like mad on each. You should only get one payment. (without, you will get several payments)
Create a manual credit
Create a credit, click save like mad. You should only get one credit. (without you will get several if you click madly enough)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Thu, 7 Mar 2013 16:37:16 +0000 (17:37 +0100)]
Bug 9377 - itemtype in duplicate biblio search
In C4::Search::FindDuplicate, when biblio has no ISBN, the duplicate search adds :
$query .= " and itemtype=$result->{itemtype}".
This is wrong when itemtype is defined in items.
This patch simply removes the itemtype from dublicate search.
Test plan :
- Go to a biblio details page
- Click on "Edit as new (duplicate)"
- If ISBN is defined, remove it
- Click on save
=> a duplicate is detected
- Change biblio item type and save
=> a duplicate is detected Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
David Cook [Mon, 11 Feb 2013 05:42:56 +0000 (16:42 +1100)]
Bug 9586 - Remove $ENV{DEBUG} info from Member Template
Currently, if $ENV{DEBUG} is set (for example to 1), the debug level
will be printed on the Add/Edit Patron pages (memberentrygen.tt) in the
form of: "Debug is on (level 1)".
While many if not most folks might not set $ENV{DEBUG} on a production
system, there is no reason to have this information printing on the
member template(s).
No where else in Koha is there a template that prints $ENV{DEBUG}
information, with the exception of calendar.inc, although that doesn't
activate until at least debug level 2 or 5, so it might be worth holding
on to. It is certainly more complicated than simply printing the debug
level. I don't do development on the calendars, so I'm not going to
address that one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Elliott Davis <elliott@bywatersolions.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Owen Leonard [Tue, 12 Feb 2013 16:05:07 +0000 (11:05 -0500)]
Bug 9570 - view plain not working in ccsr
The code in opac-showmarc.pl isn't smart enough to find the xsl files in
the "default" (prog) theme if the ccsr theme is enabled, so the "view
plain" option on opac-MARCdetail.pl fails ever time.
This patch copies some path-handling code from XSLT.pm to improve xsl
file path handling when dealing with a "sub-theme."
To test, view the MARC view in the OPAC and click the "view plain" link.
This should work correctly in prog and ccsr themes and with different
languages enabled (keeping in mind the ccsr theme will fail in general
for languages other than en).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked plain view works in both prog and ccsr themes now.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Katrin Fischer [Fri, 15 Feb 2013 16:55:38 +0000 (17:55 +0100)]
Bug 9620: IncludeSeeFromInSearches and data in $9 subfields can break indexing
In Germany 020$9 is used to store the ISBN with hyphens. In rare cases this
can break indexing in combination with IncludeSeeFromInSearches.
To reproduce:
1) Change your frameworks:
* Make sure 084 $a is visible
* Create a 084 $9 that you link to PERSO_NAME authorities.
2) Create a record or edit an existing one:
* Use the plugin on 084 to link the record to an authority.
* Make sure 400 is filled in your authority record.
Preparations all done, now test indexing:
3) Make sure IncludeSeeFromInSearches is OFF
* Reindexing should work without any problems.
4) Activate IncludeSeeFromInSearches
* Reindexing should throw an error and stop:
201.Subfields are only for data fields (generally,
just tags >= 010 at /home/koha/Koha/Filter/MARC/EmbedSee
FromHeadings.pm line 94
5) Apply patch and reindex.
* No error should occur.
* Test 4xx fields from other tags were properly indexed.
What causes the problem is the fact, that Koha tries to store
the date from the 400 in the bibliographic record for indexing.
For this it calculates a tag in the bibliographic record from the
tag it found the authority link in and the 4xx tags used in the
authority record. If you have an authority linked to a 0xx field
and the matching authority has a 4xx where xx < 10, the calculated
tag will be a control field. The attempt to add subfields to this
control field, is causing the error and breaks the indexing process.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, and is a long description :)
Test:
1) Enabled 084 (all subfields visible), added 084_9 (missing from
default framework) linked to PERSO_NAME
2) Edited authority record and added some data to 400
3) Edited bib record, linked 084 to previous auth record
4) With IncludeSeeFromInSearches OFF, re-index without problem
5) With IncludeSeeFromInSearches ON, re-index problems!!!
====================
exporting biblio
====================
1...Subfields are only for data fields (generally, just tags >= 010) at...
Abort
6) Applied patch
7) With IncludeSeeFromInSearches ON, re-index without problem
...
====================
5001....................................................................................................
Records exported: 5060
====================
...
====================
2001....................................................................................................
Records exported: 2024
====================
CLEANING
====================
Good!
*) That's "works as described", don't know if other tests are needed.
No errors from koha-qa
Signed-off-by: Elliott Davis <elliott@bywatersolions.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Thu, 28 Feb 2013 13:09:24 +0000 (14:09 +0100)]
Bug 9656: Followup Make logging to a file optional (for fines)
The -log option become optional if the -output_dir is given.
Test plan:
call the script with
1/ no one parameter : no log file
2/ -l : log file will be created in /tmp
3/ -o=/home/koha/var/log : log file with be created in the specified
4/ -o=/home/koha/var/log -l: Same as 3/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: All combination of options tested. Works well. No errors. Signed-off-by: Elliott Davis <elliott@bywatersolions.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Chris Cormack [Thu, 21 Feb 2013 09:10:48 +0000 (22:10 +1300)]
Bug 9656: Make logging to a file optional (for fines)
To test:
1/ Before the patch run misc/cronjobs/fines.pl
Notice that a file has been written to /tmp
2/ rm the file
3/ Apply the patch and run the script again
Notice the file is not created
4/ run the script with -l
Notice the file is created again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Now it work as described. No errors. Signed-off-by: Elliott Davis <elliott@bywatersolions.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 8620: Any index in DOM mode sensitive to -x flag of rebuild_zebra.pl
The definition of the Any index was sensitive to whether
spaces were present between (say) subfield elements in the
MARCXML representation of the bib being indexed. When using
the -x option to rebuild_zebra.pl, spaces would be present
because of how MARC::File::XML emits MARCXML.
When not using the -x option, spaces would not be present
and the contents of a field would be run together, potentially
as one big token.
The visible behavior was that doing a keyword search by
item barcode would sometimes not work.
To test:
0) Make sure Zebra is using DOM mode
1) Create an item record.
2) Reindex using rebuild_zebra.pl -b -z, *without* -x
3) Do a keyword search by the barcode of the item just
added; the search shouldn't work
4) Apply patch.
5) Update the following two files:
etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
etc/zebradb/xsl/koha-indexdefs-to-zebra.xsl
6) Reindex
7) Do a search that was previously failing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the problem for me - formerly not working callnumbers
and barcodes are now found in keyword (any) searches.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(revised commit description to better explain why it fixes the problem)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Passes all my tests, happy to sign off Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9574: Plack fixes for serials/subscription-add.pl
This patch fixes the following warnings under Plack:
* Use of uninitialized value $firstissuedate in string eq at \
/home/jcamins/kohaclone/serials/subscription-add.pl line 92.
* Use of uninitialized value $firstissuedate in substr at \
/home/jcamins/kohaclone/serials/subscription-add.pl line 105.
* Use of qw(...) as parentheses is deprecated at \
/home/jcamins/kohaclone/serials/subscription-add.pl line 95.
* Variable "$firstissuedate" is not available at \
/home/jcamins/kohaclone/serials/subscription-add.pl line 338.
To test:
1) Create a subscription. Ensure that setting the first issue's
publication date works.
2) Edit a subscription. Ensure that the first issue's publication
date shows up.
3) Sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No regressions found, all tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9520 -[Revised] - Update default LOC Z39.50 target
This patch updates (if present) target settings
of Library of Congress Z39.50 server.
Revision: Was trying to update wrong column 'type',
now correct column 'syntax'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: add the SetVersion call Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Conflicts:
installer/data/mysql/updatedatabase.pl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 5333 - z3950 normalization should apply only on UNIMARC
It's been a while since this bug is around. This normalization is only
used for UNIMARC and yields a fatal error when those variables are set
on (at least) MARC21 setups.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: update comment Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch corrects permission on the export option available on
catalogue pages in the staff client (detail.pl, MARCdetail.pl, etc) so
that users no longer require "export_catalogue" permission.
"export_catalogue" permission is required only for tools/export.pl.
This patch also corrects some crazy nearby indentation. Sorry, couldn't
resist.
To test, visit a page like detail.pl with and without "export_catalogue"
permission. It should be possible to save the record as MODS, MARCXML,
MARC, etc. without error.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Liz Rea [Thu, 31 Jan 2013 01:53:29 +0000 (14:53 +1300)]
Bug 8682 - Renewals do not appear on quick slips
To test:
Issue two books to a patron.
Do a renewal on one of them.
update the issuedate on the item that has been renewed to something before today (renewals on the same day will work even without this patch)
I did: select * from issues;
update issues set issuedate="2013-01-25 14:00:00" where itemnumber = 948; (itemnumber is variable depending on your test data.)
Print a quick slip before the patch - the renewal will not show up as one of today's issues.
Print a quick slip after the patch - the renewal will show up as one of today's issues.
If you need reasoning as to why a renewal should show up on the quick slip, think of it as a record of everything
a borrower did today, without the hassle of overdues.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Owen Leonard [Sun, 17 Feb 2013 00:11:52 +0000 (19:11 -0500)]
Bug 9650 - Show message if there are no notices
When there are no notices for the selected library, the
interface displays a table header with an empty table.
This patch adds a message which appears when there are no
notices for the selected library, or if no library selected
and there are no notices at all.
To test, visit the notices and slips page and
select a library for which there are no notices. A message
should be displayed, "There are no notices for this library."
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors. Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9658: Incorrect breadcrumb on report dictionary
Prior to this patch, the breadcrumb on the reports dictionary looks
like this: Home > Reports > Guided reports wizard Dictionary (notice
the lack of punctuation between "wizard" and "Dictionary").
This patch makes it consistent with the rest of the system so it looks
like this: Home > Reports > Guided reports wizard > Dictionary
I left dictionary bolded, since that seems to have been intentional,
even if I can't find a good reason for it.
To test:
1) View reports dictionary page before and after patch is applied,
observing difference.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Trivial patch. Work as described. No errors Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9655 - Capitalization wrong on 'Close and Print' button in basket groups
This patch fix button capitalization on basket groups for a vendor.
To test:
1) Go to Acquisitions, search for a vendor, click on vendor name,
Manage orders > Basquet groups
2) On Open tab, action button "Close and Print" has incorrect capitalization.
3) Apply the patch
4) Reload or repeat 1-2, capitalization fixed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works perfectly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 9651 - When deleting a fund, button is wrongly labelled with 'Delete this budget'
This patch change legends to approve/cancel deletion of a fund.
Changed to Delete/Cancel, same messages to delete a Budget.
To test:
1) When deleting a fund, confirmation messages said:
'Delete this budget XXX?' to approve
'No, do not delete' to cancel
2) Apply the patch
3) Now the messages are 'Delete'/'Cancel'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works perfectly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Vitor FERNANDES [Tue, 15 Jan 2013 17:19:59 +0000 (17:19 +0000)]
Bug 9395: Problem with callnumber and standard number searches
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Conflicts:
installer/data/mysql/sysprefs.sql
installer/data/mysql/updatedatabase.pl
Owen Leonard [Mon, 11 Feb 2013 17:12:58 +0000 (12:12 -0500)]
Bug 9385 - patron add labels right aligned in chrome
The <legend> element has been given right alignment which seems to only
be respected by WebKit-based browsers. Users of Chrome and Safari see a
right-aligned legend while others see a left-aligned one. Given that the
legend is often applied to fieldsets spanning much of the screen it
seems wiser to have them left-aligned.
This patch removes "text-align:right" from the CSS so that <legend> will
inherit the default left alignment. To test, view any page with a legend
element, for instance the patron add form. In Firefox, Chrome, Safari,
IE, etc. the legend ("Patron identity," "Main address," etc.) should be
left-aligned in the fieldset.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. Tested in IE, Chrome, Firefox, Opera.
No errors.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Jonathan Druart [Thu, 14 Feb 2013 14:23:01 +0000 (15:23 +0100)]
Bug 9545 - Followup Fix import MARC bibliographic framework text label
The export action for the default framework did not work.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Owen Leonard [Mon, 11 Feb 2013 10:49:05 +0000 (05:49 -0500)]
Bug 9545 - Fix import MARC bibliographic framework text label
This patch improves the labeling of import controls on the
MARC frameworks page by making import options more explicit. Other
changes:
- Form markup fixed to match standard form constructions
- JavaScript corrected to make more embedded English strings
translatable.
- Form labels made clickable by making "for" attributes match unique
form field ids.
- Some warning re-worded for readability and translatability.
- Large "loading" icon replaced with more proportional smaller one.
To test, view the MARC frameworks page (admin/biblio_framework.pl) and
test Export and Import functionality. Clicking each should display a
form with options clearly labeled. Import and Export operations should
complete correctly.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described, although I see what Owen means about it being a good candidate for replacement with a modal dialog box in the future.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
David Cook [Mon, 11 Feb 2013 05:24:20 +0000 (16:24 +1100)]
Bug 9585 - Fix spelling mistake in default tab conditional for opac-detail
There is just a small typo where one of the results of a conditional is
"subscription" rather than "subscriptions".
If this comes up, the correct tab (subscriptions) will not be chosen.
I'm not sure what will happen...it'll probably just have the
"holdings", "subscriptions", and "serial collection" tabs all default
to closed with none of them being open.
Test Plan:
The easiest way to test is just to double-check the other strings in the
conditional which say "subscriptions" rather than "subscription".
You can also look at opac-detail.tt where the param is shown, and note
that there is no condition for "subscription" - just "subscriptions".
Any tests other than that would be overly complex for such a trivial
patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Fri, 11 Jan 2013 11:16:29 +0000 (12:16 +0100)]
Bug 7253: followup : manage toolbar for fastcataloging
During fast cataloging, hide some toolbar menus of biblio edition page :
- Save and view record
- Z3950 Search
- Framework change
Also display "(fast cataloging)" in biblio and item editon.
Signed-off-by: koha.aixmarseille <koha.aixmarseille@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested:
- adding a fast add with duplicate and without
- adding a new record, checked toolbar showed up correctly
- editing existing record, checked toolbar showed up correctly Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Mon, 7 Jan 2013 14:46:26 +0000 (15:46 +0100)]
Bug 7253: fast cataloging not always checking out
When using fast cataloguing to create a biblio and item on the fly, workflow looses datas when a duplicate is detected.
This comes from the use of a mix of circborrowernumber and borrowernumber in forms.
This patch corrects by using always circborrowernumber in fast cataloguing workflow.
Also adds html and uri escape for barecode where necessery.
Test plan :
With duplicate :
- Go to a borrower circulation page
- Enter a non existing barcode
- Enter a due date
- Click on "Check Out"
=> a message says the barcode was not found
- Click on "Fast cataloguing"
=> The biblio edition page appears with fast cataloguing framework
- Fill mandatory fields by using an existing ISBN
- Click on "Save"
=> a yes/no message says "Duplicate record suspected"
(Choosing yes will brake fast caloguing workflow, in this case librarian should create an item and checkout again)
- Click on "No"
=> The item edition page appears with barcode already filled
- Fill mandatory datas
- Click on "Add item"
=> Borrower circulation page appears again, check that item has been checked out with the specified due date
You may test without duplicate
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested following the plan and by fast cataloging a non-duplicate.
All works as expected.
Signed-off-by: koha.aixmarseille <koha.aixmarseille@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Vitor FERNANDES [Mon, 26 Nov 2012 12:28:39 +0000 (12:28 +0000)]
BUG 9145: Authorities: standard language for UNIMARC
New Authority system preference created UNIMARCAuthorityField100 with default value "afrey50 ba0".
AuthoritiesMarc.pm uses the system preference instead of label "afrey50 ba0".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, all tests and QA script pass.
1) Check system preference is created correctly.
2) Change pref.
3) Catalog a new authority.
4) Change framework to make 100 show in frameworks or check in the
the database, that now 100 has the new defined value. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Conflicts:
installer/data/mysql/updatedatabase.pl
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Thu, 14 Feb 2013 16:31:48 +0000 (11:31 -0500)]
Bug 9615 - Combine staff home page images into single sprite
In order to reduce the number of concurrent downloads on the staff
client home page the images representing the various modules (circ,
patrons, etc) could be combined into one sprite.
This patch creates a new sprite containing all images and corrects the
CSS for the default and hover states of each link to match the previous
version. The separate images have been removed. Also added is a
GIMP-compatible Photoshop file from which the sprite is generated.
To test, apply the patch, clear your browser cache, and view the staff
client home page. Each module icon should look correct in its default
and hover states.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, Good idea! No errors. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Kyle M Hall [Tue, 12 Feb 2013 15:54:23 +0000 (10:54 -0500)]
Bug 8079 - opac not showing fines - says 'no'
Make charges of type FU be counted for opac-user.pl
Test Plan:
1) Checkout an item to a patron, back date the date due enough to create fines
2) Run fines.pl
3) Log into the patron's account via the OPAC
4) Note the fines line for that issue says 'No'
5) Apply patch
6) Reload opac-user.pl, not the fines column now says 'Yes'
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works great, Kyle. Seeing as my test patron had $4500 in fines for that item, I was glad to see that column switch to "Yes" ;).
I'm not sure what the difference is between FU and F is, or what L means, but the patch works, so I'm signing off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, all tests and QA script are ok.
Note: why show yes and not the fine amount? Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fridolyn SOMERS [Thu, 6 Dec 2012 14:11:57 +0000 (15:11 +0100)]
Bug 9226: Wrong branch filter after suggestion creation
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before the patch, upon submitting a new suggestion in the staff client I
was redirected to a view which was not filtered by branch. After the
patch I was redirected to a view which was filtered by my logged-in
branch. Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Bug 7608: Manual history should not always be enabled
When editing a subscription, the "manual history" block is visible even
if the subscription was created with manual history off.
To test:
1) Create a subscription and do not check the "Manual history" checkbox.
2) Save the subscription.
3) Edit the subscription. Note that the manual history section does not
appear.
4) Enable manual history. Note the appearance of the manual history
section.
5) Save the subscription.
6) Edit the subscription. Note that the manual history section appears.
7) Click "[cancel manual history]". Note the disappearance of the manual
history section, and the unchecking of the "Manual history" checkbox.
8) Sign off on patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Colin Campbell [Wed, 23 Jan 2013 10:52:28 +0000 (10:52 +0000)]
Bug 9454: Use placeholders when adding basket
Should always use placeholders when passing variables
to DBI; avoids unforeseen bugs and security issues.
Also:
- reformated the long lists of parameters to add CR
- moved the setting of defaults out of the call to ModBasket to
clarify code
- Setting parameters to undef if they were not defined
was unnecessary bloat and obscuration
Testing:
Patch should not change functional behaviour. To test check that
order baskets can still be correctly created.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Created a new basket, added order lines and closed basket.
Checked everything worked in the staff interface, also checked
the entry for the new basket in aqbasket in the database.
Logs are clean too. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Mon, 3 Dec 2012 09:12:42 +0000 (10:12 +0100)]
Bug 9104: country in CSV in overdue_notices.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Output of of the overdues script with -csv now contains country
from the first address in the patron account.
I checked output for 2 patrons, one with and one without country
in the patron's address.
All tests pass. Perlcritic fails before and after:
"require" statement with library name as string at line 29, column 12.
Use a bareword instead. (Severity: 5) Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Mon, 11 Feb 2013 13:19:43 +0000 (08:19 -0500)]
Bug 9583 - OPAC cart button display problem in Chromium
Legacy markup in the script which generates the OPAC's Cart button
causes display problems in Chrome under the new HTML5 doctype.
This patch removes the extra markup, which has been unnecessary since
we changed the way the Cart and Lists buttons are displayed in Bug
7584.
To test, view the OPAC in several browsers, including a Chromium-based
browser (Specifically Chromium-based. It is not a WebKit-related bug).
The Cart button should display correctly with and without items in the
cart.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works great, back to normal.
Tested in windows (chrome, firefox, opera) and linux (chrome, chromium)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with Chromium and Firefox in Ubuntu. No regression found and
display is correct now. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fridolyn SOMERS [Thu, 6 Dec 2012 09:05:00 +0000 (10:05 +0100)]
Bug 9222: manual history reversed in subscription-detail.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Kyle M Hall [Thu, 17 Jan 2013 13:43:37 +0000 (08:43 -0500)]
Bug 9380 - branch not recording right on writeoff
Test Plan:
1) Write off fines as various branches
2) Observe the stats lines include the wrong branchcode
3) Apply patch
4) Repeate step 1
5) Observe the stats lines include the correct branchcode
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Also tested by changing branch and writing off again - all
tests pass.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked individual and complete write off for different branches.
Write offs were always recorded correctly for the logged in branch.
All tests and QA script pas. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
projects / koha.git / log