Mulitple 082 fields are already separated by |, but multiple
$a in one 082 field were only separated by space, making those
not easy to read.
Patch takes care that the | separator is used in all cases.
To test:
- Catalog a record with multiple 082 fields
- Add one or multiple $a subfields to each
- Verify every single classification is separated from
the others with a | in staff and in OPAC detail pages
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 03:29:16 +0000 (05:29 +0200)]
Bug 13874: 'Rotating collections' are a circulation tool
Moves the entry for 'Rotating collections' from the Catalog
column to the 'Patrons and circulation' column.
To test:
- Verify the entry has been moved on the tools home page
NOTE: I agree that collections makes more sense under the new
column.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Wed, 15 Apr 2015 16:33:29 +0000 (12:33 -0400)]
Bug 14001: Inventory has bad $_ references
After receiving an error while attempt a simple inventory run,
Two lines were changed from:
...$_->...
to
...$item->...
since the loop variable is $item. And $_ is not set to the
expected hash reference, when there is a loop variable.
This also helps explain the "Why are there blank dates on my
last seen field?" problem that has been mentioned by users.
TEST PLAN
---------
1) Apply this patch after a reset to master.
2) Log in to staff client
3) Add one item via z39.50, setting barcode to a known value (BARCODE1)
4) Wait for the reindex
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for a file with the barcode in it
7) Set the library dropdown to the library branch of the added item.
8) Check 'Compare barcodes list to results:'
9) Click 'Submit'
-- This should not die under plack.
This should not generate blank last seen dates.
The last seen dates should be as expected.
10) run koha qa test tools
11) Confirm the two change point correspond to the two change points
in the patch which shall not be pushed to master.
The test result comply with expected outcome outlined in test plan.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Wed, 17 Jun 2015 10:28:39 +0000 (12:28 +0200)]
Bug 14401: Zebra index configuration doesn't allow exact search for C.
2 lines in the Zebra configuration files prevent an exact search for C.,
while all other [A-Z]. searches work correctly.
After taking a look at the /etc/zebradb/etc/word-phrase-utf.chr
those 2 lines cause the problem:
map (^c\.) @
map (^C\.) @
I propose to remove them.
To test:
- Catalog a record with an item with callnumber: C.
- Catalog a record with an item with callnumber: B.
- Try seaching for the second using callnum,ext:B. (exact field search)
- Verify search works.
- Try searching for the other with callnum,ext:C.
- Verify no result.
- Apply the patch - copy the zebra config file if necessary into the right spot
- Reindex
- Repeat searches - both should not bring up the correct record.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Robin Sheat [Wed, 27 May 2015 00:25:34 +0000 (12:25 +1200)]
Bug 14394: fix documentation of OpacHiddenItems
The current documentation of OpacHiddenItems told people to go and read
a file on the server, which most people don't have access to. This
replaces it with a link to the wiki.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It doesn't apply for some reason. Fixed
Added target attribute to open in new window/tab,
hope you don't mind.
Updated documentation
No errors
Belongs to Aleisha or Robin?
Update assignee please :)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Fri, 19 Jun 2015 13:00:33 +0000 (09:00 -0400)]
Bug 14422: Typo in updatedatabase.pl
TEST PLAN
---------
1) backup db
2) git checkout -b my_3.6.x origin/3.6.x
3) drop db and create blank one
4) git reset --hard origin/3.6.x
5) run web installer
6) set HomeorHoldingBranchReturn system preference to 'holdingbranch'.
7) create a Default checkout, hold rule
home -> koha administration -> Circulation and fines rules
-- I put 10 checkouts total and clicked 'Save'
-- there currently is not 'returnbranch' in default_circ_rules.
8) git reset --hard origin/3.20.x
-- or whatever version you apply this to
(3.8.x, 3.10.x, 3.14.x, 3.16.x, 3.18.x, or 3.20.x
-- 3.21.00.008 deletes the systempreference involved)
9) ./installer/data/mysql/updatedatabase.pl
10) check HomeorHoldingBranchReturn systempreference
-- Currently says 'holdingbranch', but
the value of 'returnbranch' in default_circ_rules is
'homebranch'.
11) repeat steps 3-8
12) apply this patch
13) repeat steps 9-10
-- Currently says 'holdingbranch', and
the value of 'returnbranch' in default_circ_rules is
'holdingbranch'.
14) run koha qa test tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 3.6.x install, updated to 3.8.x
Value is preserved
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Note: I haven't followed the test plan, but the fix is trivial.
Maybe it could worth to upate 3.21.00.008 and check the value of
HomeOrHoldingBranchReturn before deleting it.
We could raise a warning if HomeOrHoldingBranchReturn ==
'holdingbranch'. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 00:15:03 +0000 (02:15 +0200)]
Bug 4925: Remove Smithsonian as a delivered z39.50 target
Removes the Smithsonian as a target installed with the
sample data during installation.
Also adds the newer LOC authority targets to files where
they were missing.
To test:
- Verify the Smithsonian has been removed from all
translated installers
- Verify the files are still valid SQL and install
correctly
NOTE: There was tiny scope creep which included ensuring
there were two Authority z39.50 servers as well.
Text files properly reflect the removal.
SQL 'source' of SQL files worked properly.
Was able to Z39.50 search for all of the 'en'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Intranet:
1/ Marc view link
2/ The Please upload one image link
Test plan:
On a record detail page (staff and OPAC), print the page and confirm
these blocks no longer appear.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Fri, 19 Jun 2015 13:47:58 +0000 (15:47 +0200)]
Bug 10063: Remove outdated FIXME
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 02:17:53 +0000 (04:17 +0200)]
Bug 10063: Correct documentation of C4::Members::IsMemberBlocked
Rephrased documentation a bit, replacing fine days with the
more general term restriction. As IsDebarred checks for existing
active restrictions.
TEST PLAN
---------
1) apply patch
2) git diff origin/master
-- do the changes make sense
3) perldoc C4::Members
-- look for the IsMemberBlocked.
-- Does it reflect current state
4) koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 00:58:53 +0000 (02:58 +0200)]
Bug 10119: Add note about CalculateFinesOnReturn to description of finesmode
This adds a note to the descrpition of the finesmode system
preference mentioning that CalculateFinesOnReturn is another
option for charging fines:
Note: Fines can also be charged by the CalculateFinesOnReturn system preference.
To test:
- Search for the finesmode system preference
- Verify the new text shows and is correct
NOTE: New text appears as expected. You can also just scroll for
it on the Circulation preferences tab.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Fri, 19 Jun 2015 15:24:57 +0000 (11:24 -0400)]
Bug 14425: Typo in C4::Context IsSuperLibrarian perldoc
TEST PLAN
---------
1) git checkout -b bug_14425 origin/master
2) perldoc C4::Context
/IsSuperlibr
-- see it is bad.
3) apply patch
4) perldoc C4::Context
/IsSuperLibr
-- see it is fixed.
5) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix typo, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
% git grep -i IsSuperLibrarian|wc -l
55
% git grep IsSuperLibrarian|wc -l
55 Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Fri, 19 Jun 2015 16:32:18 +0000 (11:32 -0500)]
Bug 14424: Tools Help Files for 3.20
This patch updates and adds help files to 3.20+
To test:
* Visit batch record modification and note that there is a help file
and confirm the text is right
* Visit export data, import borrowers, stage marc for import, and log viewer
* Confirm updated text is right
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Nicole C. Engard [Fri, 19 Jun 2015 16:08:56 +0000 (11:08 -0500)]
Bug 14424: Admin Help Files for 3.20
This patch updates some of the help files for Admin areas in 3.20+
To test:
* Visit
* Frameworks, add field, add subfield
* Column settings
* Patron attributes
* Circ rules
* Confirm help loads up and is right
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Tue, 9 Jun 2015 22:11:19 +0000 (00:11 +0200)]
Bug 11458: Improve confusing description of syspref 'gist'
The description of "gist" was:
"Default tax rates are ... (enter in numeric form, 0.12 for 12%.
First is the default. If you want more than 1 value, please
separate with |) "
The doubled use of "default" is confusing here.
With the patch it reads:
Tax rates are ... Enter in numeric form, 0.12 for 12%.
The first item in the list will be selected by default.
For more than one value, separate with | (pipe)
To test:
- Verify that the gist system preference description is
correct.
The use of "default" is confusing here.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To exploit the vulnerability, no authentication is needed
To test
1/ Turn on mysql query logging
2/ Hit /cgi-bin/koha/opac-tags_subject.pl?number=1+PROCEDURE+ANALYSE+(EXTRACTVALUE(9743,CONCAT(0x5c,(BENCHMARK(5000000,MD5('evil'))))),1)
3/ Check the logs notice something like
SELECT entry,weight FROM tags ORDER BY weight DESC LIMIT 1
PROCEDURE ANALYSE
(EXTRACTVALUE(9743,CONCAT(0x5c,(BENCHMARK(5000000,MD5('evil'))))),1)
4/ Apply patch
5/ Hit the url again
6/ Notice the log now only has
SELECT entry,weight FROM tags ORDER BY weight DESC LIMIT 1
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Confirmed the problem and the fix for it. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Chris Cormack [Thu, 18 Jun 2015 23:41:45 +0000 (11:41 +1200)]
Bug 14418: More XSS vulnerabilities in opac-shelves.pl
To test:
1/ Hit a url like
/cgi-bin/koha/opac-shelves.pl?viewshelf=7&op=modif&display="><script>alert('oh
noes')</script> Where the id is a valid shelf id
2/ Notice the js is executed
3/ Apply patch
4/ Reload page
5/ Notice input is now escaped on display
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Tested in Debian, couldn't reproduce the alert in Iceweasel, but in
Chromium. Patch fixes it. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Chris Cormack [Thu, 18 Jun 2015 23:30:22 +0000 (11:30 +1200)]
Bug 14418: XSS flaw in opac-shelves.pl
To test:
1/ Create a list and add at least one item to it
2/ Hit a url like http://192.168.2.18/cgi-bin/koha/opac-shelves.pl?viewshelf=7&sort=author&direction=%22%3E%3Cscript%3Ealert%28%27oh%20noes%27%29%3C/script%3E
Where the shelf id is the number of the list you created, notice the js is executed
3/ Apply the patch
4/ Reload the page notice the js is now escaped
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Chris Cormack [Thu, 18 Jun 2015 21:25:22 +0000 (09:25 +1200)]
Bug 14418: XSS Vulnerabilities in OPAC search
Fix for /cgi-bin/koha/opac-search.pl
To test
1/ Hit /cgi-bin/koha/opac-search.pl?tag="><script
src='http://cst.sba-research.org/x.js'/>&q=a
2/ Notice the js is executed
3/ Apply patch
4/ Reload page, notice it is no longer executed
5/ Test the rss links work still
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Confirmed bug and that the patch fixes it. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Fri, 19 Jun 2015 09:21:47 +0000 (11:21 +0200)]
Bug 14416: (follow-up) opac addbybilionumber
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Chris Cormack [Thu, 18 Jun 2015 23:26:02 +0000 (11:26 +1200)]
Bug 14416: Stored XSS vulnerability
opac-addbybiblionumber.pl is also vulnerable because it doesn't escape
list names.
To test
1/ Create a malicious list name
2/ Try to add a biblio to the lists
3/ Notice js is excuted
4/ Apply patch
5/ Test again
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Chris Cormack [Thu, 18 Jun 2015 22:54:40 +0000 (10:54 +1200)]
Bug 14416: Stored XSS vulnerability
The affected page in the OPAC client is:
http://testbox:9001/cgi-bin/koha/opac-shelves.pl
the vulnerable parameter: addshelf
The affected page in the STAFF client is:
http://testbox:9002/cgi-bin/koha/virtualshelves/shelves.pl
To test:
1/ Create a shelf in the opac that contains some malicious js
eg Bad stuff <script>alert('oh noes');</script> as the name
2/ Go to /cgi-bin/koha/virtualshelves/shelves.pl in the staff client
Note the js is executed
3/ View
http://192.168.2.18:8080/cgi-bin/koha/svc/virtualshelves/search?template_path=virtualshelves/tables/shelves_results.tt&type=1
Notice the html is not escaped
4/ Apply patch
5/ View
http://192.168.2.18:8080/cgi-bin/koha/svc/virtualshelves/search?template_path=virtualshelves/tables/shelves_results.tt&type=1
Notice the html is now escaped
6/ View /cgi-bin/koha/virtualshelves/shelves.pl - no more exploit
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Amit Gupta [Tue, 14 Apr 2015 08:37:07 +0000 (14:07 +0530)]
Bug 13993: (3) Transfer order leaves incorrect orderstatus
11) Apply patch (3)
12) Log in to staff client
13) Acquisitions
14) Create a basket for two different vendors
15) Place an order in one vendor's basket.
16) Transfer the order to the other vendor's basket.
17) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should succeed without intervention.
18) Run koha qa test tools for the last 3 commits.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com> Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Thu, 16 Apr 2015 13:14:54 +0000 (09:14 -0400)]
Bug 13993: (2) Correct poorly transferred orders
Added Atomic Update to fix poorly transferred orders
TEST PLAN
---------
8) Apply patch (2)
9) Run the database updates
$ ./installer/data/mysql/updatedatabase.pl
-- This should run without error
10) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should fail, because the transfer function is still
not fixed.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Mark Tompsett [Thu, 16 Apr 2015 12:54:30 +0000 (08:54 -0400)]
Bug 13993: (1) Add tests to confirm 'new' and 'cancelled'
This adds 2 tests to t/db_dependent/Acquisition/TransferOrder.t
in order to confirm the order's status is properly marked.
TEST PLAN
---------
1) Log into staff client
2) Acquisitions
3) Create a basket for two differing vendors.
4) Place an order in one of the baskets.
5) Transfer the order from one vendor's basket to the others.
6) Apply this patch (1) only
7) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- should fail one test: not marked as 'cancelled'.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Tue, 9 Jun 2015 00:32:46 +0000 (02:32 +0200)]
Bug 14215: Change the 'delimiter' syspref description for its wider use
Patch changes 'report files' to 'CSV files' as there are more
options now for downloading and creating CSV files where this
preference is taken into account.
To test:
- Verify the changed system preference description for
'delimiter' is correct.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Frédéric Demians [Tue, 26 May 2015 16:23:11 +0000 (18:23 +0200)]
Bug 13904: Make unimarc_field_4XX displays usefull 200 subfield data
When searching for multivolumes titles, UNIMARC 4xx field plugin
displays the title of the biblios (200$a), without giving info about
volumes (200 $h $i). It neither doesn't display $e (subtitle) info which
could greatly help to disambiguate search result.
The displayed title is supposed to link to a biblio record view (MARC /
normal). It doesn't work.
TO TEST:
- On a UNIMARC Koha, add a new biblio record
- Call the 4XX plugin from 461/463 field
- Search for a biblio record which contains 200$e, and/or 200$h and/or
200$i subfields.
- You get a result list, with two issues:
1. $a, $h & $i aren't displayed
2. Biblio title is not a link
- Apply the patch, and repeat previous steps.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
I got a link on fulltitle, but in 'ahie' order (not aehi)
Fixed some tabs.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Tue, 24 Mar 2015 16:01:30 +0000 (17:01 +0100)]
Bug 4137: Fix the OPACViewOthersSuggestions behavior
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Wed, 22 Apr 2015 10:14:24 +0000 (12:14 +0200)]
Bug 10866: Hide patron's history if intranetreadinghistory is set to not allow
If set to "not allow", the intranetreadinghistory pref prevent staff
members to access patron's checkout history.
But:
1/ The page is still accessible if you know the url
2/ The history can be consulted on the item history page
Test plan:
0/ Don't apply this patch
1/ Set the intranetreadinghistory to allow
2/ Go on a patron's checkout history page
3/ Open a new tab and go on a item's checkout history page
4/ Set the intranetreadinghistory to not allow
5/ Refresh both pages => no change
6/ Apply this patch
7/ Refresh both page.
On the first page, you should see a warning
On the other one, you should see that the patron column is not displayed
anymore.
Followed test plan, results were as expected. Signed-off-by: Marc Véron <veron@veron.ch>
http://bugs.koha-community.org/show_bug.cgi?id=10886 Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nice addition! Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Magnus Enger [Wed, 17 Jun 2015 12:36:44 +0000 (14:36 +0200)]
Bug 14403: Remove warn in Koha::NorwegianPatronDB
Line 99 has an unconditional warn, left over from development:
warn "$combined_username => $combined_password";
This patch deletes the line i question.
To test:
No testing needed, just have a look at the diff and see that
it makes sense to delete the warn.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 03:04:56 +0000 (05:04 +0200)]
Bug 13427: jQuery Timepicker is not translated on returns page
The returns page was missing an include with the translated strings.
To test:
- Install an additional language, like de-DE
- Confirm the bug on the returns page
- Make sure SpecifyReturnDate is activated
- Open the datepicker, look at the time settings
- Apply the patch
- Reinstall the language, no update of the po files is needed
- Retest
- Verify, that now the time settings are translated
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Mon, 8 Jun 2015 01:18:35 +0000 (03:18 +0200)]
Bug 11467: Bug Untranslatable srings in opac-detail.tt (IDreamBooks*, OpacBrowseResults)
Patch marks several strings in the Javascript on the OPAC detail
and result page for translation.
1) IDreamBooks*
- Activate the 3 IDreamBooks* system preferences
- Check the 'cloud' and additional content shows up correctly on
the detail and result pages
- Verify everything works as expected and the same as without the patch
2) OpacBrowseResults
- Activate OpacBrowseResults
- Do various searches
- Verify the nex, previous, browse result list features still
work the same as without the patch
Bonus: Check new strings appear in the .po files by updating one
language with the patch applied (perl translate update de-DE)
NOTE: Really should have read the test plan more closely.
I couldn't find the 'Go to detail:' section, until I clicked
'Browse results'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Aleisha [Tue, 9 Jun 2015 18:20:52 +0000 (18:20 +0000)]
Bug 11011: Rephrasing 'in keyword' in OPAC authority search
Using 'in the complete record' rather than 'in keyword'. I think this fits well as it seems that this means the search looks anywhere in the record.
To test:
1) In the OPAC, click on Authority Search
2) Notice that in the drop-down menu for the 'Where:' field, there is an 'in keyword' option.
3) Apply patch
4) Now says 'in the complete record'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Sun, 7 Jun 2015 21:45:10 +0000 (23:45 +0200)]
Bug 8686: Raise required version of URI::Escape to 3.31
Raises the minimum required version of URI::Escape from
1.36 to 3.31.
TEST PLAN
---------
1) git branch -b bug_8686 origin/master
2) ./koha_perl_deps.pl -a | grep URI
-- it will list 1.36 required
3) git bz apply 8686
4) ./koha_perl_deps.pl -a | grep URI
-- it will list 3.31 required
5) koha qa test tools
NOTE: Also default in Ubuntu 14.04 LTS,
not just Wheezy as noted in comment #15.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signoff based on Nicole's comment (bug 9990 comment 6):
"This stops happening if you upgrade URI::Escape to
3.31. We should make it clear in the Perl Modules page that an upgrade
is needed." Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Fri, 22 May 2015 09:58:18 +0000 (11:58 +0200)]
Bug 14070: Prevent to save a letter if an error occurred
On saving a letter, if the title or the content of a template is not
defined, a JS alert is raised. But the form is submitted anyway.
This patch prevent the form to be submitted.
Test plan:
- Create or edit a letter
- Fill the title for a template, not the content
- Save
- Confirm you get the alert and that the form is not submitted
Signed-off-by: Indranil Das Gupta <indradg@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 7 Jun 2015 23:49:24 +0000 (01:49 +0200)]
Bug 14351: Remove given-when from opac-search.pl
Reformats given-when to if-elsif-else in opac-search.pl
to remove the experimental feature and with it a lot
of warnings from the logs.
To test:
- Do several different advanced searches with and
without expanded search options
- Verify the link back to the search appears above
the results list and works correctly
See also: test plan on bug 13307
NOTE: Even installed firefox plug in to edit cookies to
trigger else case. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sat, 6 Jun 2015 12:34:57 +0000 (14:34 +0200)]
Bug 14350: Missing statement in kohastructure.sql - DROP TABLE IF EXISTS borrower_sync
Reported by Jonathan on bug 11401:
DROP TABLE IF EXISTS borrower_sync;
is missing in installer/data/mysql/kohastructure.sql
To test:
- Run the web installer and confirm all tables are
created correctly
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14280: Add branches fields to discharges letters
Currently, when generating a discharge letter, branches fields are not translated in the letter (<<branches.branchname>>, <<branches.branchaddress1>>, etc.)
This patch fixes that.
How I tested:
- Set syspref 'useDischarge' to 'allow'
- Go to Home > Tools > Notices & Slips
- Edit DISCHARGE, add to 'Email message':
<p><<branches.branchname>><br />
<<branches.branchaddress1>><br />
<<branches.branchaddress2>><br />
<<branches.branchaddress3>><br />
<<branches.zip>> <<branches.city>><br />
</p>
- Go to detail page of a patron > discharge
- Click 'Generate discharge'
- Verify that the PDF contains the information above.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Thu, 4 Jun 2015 14:28:08 +0000 (16:28 +0200)]
Bug 14029: Provide 'clear' link to empty reports search filters
Patch adds a 'clear' link next to the 'Apply filters' button to
empty out the form fields.
To test:
- go to the reports module
- make sure you have some saved reports
- search your saved reports using the author, keyword and date filters
- verify searching works as expected
- verify the new 'clear' link works as expected
Tested couner patch, followed test plan, works as expected. QA tools ok. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Tue, 25 Nov 2014 15:59:01 +0000 (10:59 -0500)]
Bug 13336 - Add time to date column for patron circulation history
Some librarians have expressed that it would be very helpful to have the
hours displayed in the date column for a patron's circulation history.
The time an action took place can be vital to tracking down which
librarians were working at the time a given circulation action took
place.
Test Plan:
1) View a patron's circulation history
2) Note the Date column has no hour/minute
3) Apply this patch
4) Reload the page
5) Note the hour and minutes now display
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Mon, 20 Apr 2015 10:39:33 +0000 (06:39 -0400)]
Bug 7981: (QA followup) Rename TT vars
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Katrin Fischer [Tue, 21 Apr 2015 09:56:16 +0000 (11:56 +0200)]
Bug 7981: Follow-up - Fix qa script complaints
- Fix updatedatabase, moving the update entry into the right spot
- Fix some tabs
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Mon, 13 Apr 2015 11:21:49 +0000 (13:21 +0200)]
Bug 7981: Use The Branches TT plugin instead of GetBranchName
Note that homebranchname is never used in the template.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Mon, 13 Apr 2015 11:21:41 +0000 (13:21 +0200)]
Bug 7981: Remove HomeOrHoldingBranchReturn syspref from C4::UsageStats
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Tue, 28 Apr 2015 09:26:44 +0000 (11:26 +0200)]
Bug 11941: Add link to patron lists from the patron home page
The patron lists are only accessible from the tools module, which is not
easily accessible when you are in the patron module.
Test plan:
Go on the patron home page.
In the toolbar, you should see a link to the patron lists.
NOTE: Tweaked button to a to get the click to work.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14206: Adds test for getletter() call from overdue_notices.pl
Adds missing test for getletter() when called from overdue_notices.pl
Test plan
=========
1/ apply this patch
2/ run prove -v t/db_dependent/Letters.t
all tests should pass, especially test #40 which tests call from
overdue_notices.pl
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14206: Adds delete function for non email templates
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 8 Apr 2015 13:24:50 +0000 (15:24 +0200)]
Bug 13970: Remove category_type related code
Working on bug 13497 and bug 9314, I run into some Koha vestiges.
The category_type parameter should not be passed to memberentry.
On creating a new patron, the categorycode should be passed, and on
editing, it's useless. We can work with the borrowernumber and retrieve
these values.
Details of the changes:
- members-toolbar.inc: Remove the category_type parameter passed to
memberentry.pl
- memberentrygen.tt: Just remove the useless category_type parameter on
editing a patron. Also remove the unused one passed to
guarantor_search.pl.
- tables/members_results.tt: the borrowernumber is enough to edit a
patron.
- memberentry.pl: check_categorytype is never used in the template, all
the process to calculate/retrieve it is unnecessary.
- members/nl-search.tt: The borrowernumber is enough to edit a patron.
Test plan:
Try to create and edit patrons and verify that
- the guarantor search still work
- the form (memberentry) behave as before
Edit a patron from the nl-search.pl script (Magnus?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 9314 (13497 already pushed)
No evident regressions found, add/edit patron works,
search/set guarantor works.
Cant test nl-patron.pl save for exec it.
prove -v t/NorwegianPatronDB.t runs
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 5 Jun 2015 12:06:29 +0000 (08:06 -0400)]
Bug 14338: Unable to delete patron images
The call to RmPatronImage is still passing cardnumber as its parameter
instead of borrowernumber.
Test Plan:
1) Upload a patron image
2) Ensure the card number is not the same as the borrower number
3) Attempt to delete patron image
-- Image will remain
4) Apply this patch
5) Attempt to delete patron image
-- Image will be removed
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 22 May 2015 11:11:19 +0000 (13:11 +0200)]
Bug 13265: Use sessionStorage to store searches instead of cookies
This is a counter patch.
The idea is to provide a permanent solution for the cookie length issue
we occurred on storing the searches (intranet side).
Test plan:
Launch as many searches as you can (don't forget to sleep).
You should not get any error.
Confirm there is no regression using the results browser.
Tested with 6 parralel searches in different tabs (with alternatively browising up and down). No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Aleisha [Tue, 9 Jun 2015 02:02:55 +0000 (02:02 +0000)]
Bug 14360: Unescaped variable causes alert pop-up
To test:
1) Create a list in the OPAC, name it: <script>alert('Hello');</script>
2) Delete the list
3) Confirm deletion
4) See the alert say 'Hello'
5) Apply patch
6) Recreate list with same name
7) Delete list
8) Confirm deletion and alert no longer pops up
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Aleisha [Mon, 8 Jun 2015 02:30:23 +0000 (02:30 +0000)]
Bug 14360: Unescaped variable causes alert
Adding |html to [% resultsperpage %] to escape the variable and get rid of the alert.
To test:
1) Go to URL such as ... /cgi-bin/koha/opac-authorities-home.pl?op=do_search&resultsperpage=1%22%3E%3Cscript%3Ealert%28document.cookie%29%3C/script%3E
2) Notice pop-up box with alert
3) Apply patch, refresh page
4) Notice alert is gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 15 Apr 2015 05:02:08 +0000 (01:02 -0400)]
Bug 10625: Inventory/Stocktaking tool cannot handle windows file uploads
The current code uses
$barcode = <fh>;
logic. This reads until \n, as far as I can tell.
EOL is indicated by \n, \r, and \r\n depending on OS and software.
So, to this end, rather than File::Slurp (which is a potential
memory hog, which is already an issue with no filters), a loop
to pre-read the barcodes was written.
This loop includes:
$barcode =~ s/\r/\n/g;
$barcode =~ s/\n\n/\n/g;
my @data = split(/\n/, $barcode);
push @uploadedbarcodes,@data;
So, that means that lines ending in \n would have it stripped
and pushed into the uploaded barcodes array.
Lines ending in \r would likely be read as one giant block,
have everything converted to single \n's and then using a split,
the set of barcodes are pushed into the uploaded barcodes array.
Lines ending in \r\n would get that stripped and pushed into the
uploaded barcodes array.
It is then the uploaded barcodes array that is looped over for
validating the barcodes.
TEST PLAN
---------
1) Back up your database
2) Download the three sample files (or create your own)
3) Log in to staff client
4) Create a branch with no inventory.
5) Home -> Tools -> Inventory/Stocktaking
6) Browse for your '\r' test file.
7) Limit to just that branch
8) Click 'Submit'
-- Confirm expected errors
9) Repeat steps 5-8 with the '\n' test file.
10) Repeat steps 5-8 with the '\r\n' test file.
-- one of these repetitions should have problems.
11) Apply patch
12) Repeat steps 5-8 for each of the 3 test files.
-- there should be no issues.
13) run koha qa test tools.
Note: This is a tweak based on Jonathan Druart's comment #16
I have reset it to needs sign off again.
Followed test plan. Works as expected. qa OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 14 May 2015 13:09:40 +0000 (15:09 +0200)]
Bug 13437: Replace javascript function parameter in builder
The builder contains js functions with a parameter like subfield_managed
or i or something similar. This parameter contains the html id of the
field corresponding with the plugin.
With the functionality of Koha::FrameworkPlugin in place, we can eliminate
one js function call and get the same id via the event passed in. Note
that this actually makes the function a 'real' event handler.
Also note that in many cases this parameter was not used but the id
was borrowed from a perl variable like $params->{id}. If the field is not
cloned, this is not a problem. But some fields can be cloned and should
not use the static perl value but should get it from the event.
Test plan:
Look for js errors when loading the marc editor.
Since the Focus or Click event code has been touched for most marc21
plugins, move your cursor into the field or click on the tag editor
button. Verify that the focus event updates the correct field or the
click event correctly launches the plugin AND the value comes back into
the right field.
Bonus: Attach a plugin with popup (like leader) to 040$d. Clone this field.
Verify that the two launch buttons operate on the correct value.
(This resolves a current bug.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all 15 plugins.
Plugin marc21_linking_section seems to work, but I could not get it to pass
back something useful into my field. (Same without this patch.)
Tested the clone button with leader on 040d.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All seems to work, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 14 May 2015 08:20:15 +0000 (10:20 +0200)]
Bug 13437: Conversion of marc21 cataloguing plugins to new style
This patch converts marc21 plugins to new style by making the following
modifications:
[1] Replace use strict with use Modern::Perl. This implies that we now
re-enabled warnings. There are no redefine warnings anymore, but note that
we need to silence some warnings from individual plugins that were covered
by disabling the warnings pragma until now. Silencing these individual
warnings is outside the scope of this report.
[2] Sub plugin_javascript is replaced by an anonymous subroutine $builder.
[3] The parameters of $builder are combined in a params hashref. In most
cases we only need $params->{id} for the function name.
[4] Javascript function Clicxxx is renamed to Clickxxx.
[5] The builder does no longer return function_name.
[6] Sub plugin is replaced by subroutine $launcher.
[7] The parameters of $launcher are combined in a params hashref. We only
use $params->{cgi}. Mostly we save that to $input. One exception: $query.
[8] The plugins returns a hash with $builder and/or $launcher.
Test plan:
[1] Run t/db_dependent/FrameworkPlugin.t -incl cataloguing/value_builder/
marc21*.pl. This should catch compile errors and general problems when
building or launching these plugins.
NOTE: You will see several initialize warnings from individual plugins that
were hidden until now by disabling warnings. This is fine; we will be
able to address these warnings now on new reports.
[2] Check behavior of several plugins in the marc editor.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all marc21 plugins. Attached unused plugins to some field.
Some plugins (unused by default) may need some further attention, but
also outside the scope of this report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New warnigs, but all seems to work.
No errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Wed, 13 May 2015 11:47:38 +0000 (13:47 +0200)]
Bug 13437: Trivial edits on marc21 plugins before conversion
marc21_field_003.pl: copy-pasta comment about date removed
marc21_field_005.pl: commented use removed
marc21_field_006.pl: old/irrelevant pod lines
marc21_field_007.pl: old/irrelevant pod lines
marc21_field_008.pl: old/irrelevant pod lines, move sub par line twice
marc21_field_008_authorities.pl: whitespace, old/irrelevant pod lines
marc21_field_040c.pl: two commented lines removed
marc21_field_040d.pl: whitespace, commented lines, old/irrelevant pod
marc21_field_245h.pl: whitespace
marc21_linking_section.pl: relocated some comment lines, and replaced a new
CGI object by the one passed in via the plugin launcher (agreed, this may
not be so trivial as the other changes)
Test plan:
These (trivial) changes are hard to test.
Pick a few plugins and verify that behavior is not changed in the marc
editor.
For the brave: Try marc21_linking_section.pl.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tried marc21_linking_section.pl :)
(ling plugin to 773$9, create new record, search for parent and check values inserted)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Tue, 12 May 2015 15:49:04 +0000 (17:49 +0200)]
Bug 13437: Preliminary changes for marc21 plugins field 008
Preliminary work on marc21_field_008.pl and 008_authorities.pl.
Moving $dateentered en $defaultval to lower scope level.
date_entered is a new sub (in a module); sub Field008 has been reduced to
one line.
Added a trivial unit test for date_entered.
Note: the format used in date_entered could be added in DateUtils, moving
this logic to a better place.
Test plan:
Use both plugins in the marc21 editor (biblios/authorities).
Run the adjusted unit test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both plugins works, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 4 Jun 2015 09:35:15 +0000 (11:35 +0200)]
Bug 14256: (follow-up) Check for unique constraint to regenerate random data
There were some issues in the previous patch. This patch fixes the
following:
- rename $value with $original_value
- remove $at_least_one_constraint_failed and $values_ok which make the
code unnecessarily complicated
- the constraints have to be checked only if no original value is passed
- _buildColumnValue created a key to the default value hashref, it broke
the test:
last BUILD_VALUE if exists( $default_value->{$source} );
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14256: Check for unique constraint to regenerate random data
Unique constraints should be checked when creating random data. Otherwise
we get failures when the generated data already exists on the DB.
This patch takes advantage of ->unique_constraints() to do the job,
looping through all the unique constraints defined for the source.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 16 Apr 2015 14:39:09 +0000 (16:39 +0200)]
Bug 10355: paramater 'object' lost on the road
Test plan:
1) Go to any detail page in staff
2) Click on the modification log tab
3) Verify, that the object is prefilled with the records biblionumber
and you can also see it as parameter in the url
4) Click a second time on modification log to reset your search
Before this patch, the object parameter was empty.
It now contains the value of the biblionumber.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Bug 14344: uninitialized value warning C4/Utils/DataTables/Members.pm
The condition for the assignment depends on $searchtype to be defined
and equal to 'contains'. So this change doesn't change the semantics.
- if $term !~ /^%/
- and $searchtype eq "contain";
+ if (defined $searchtype) && $searchtype eq "contain"
+ && $term !~ /^%/;
To test:
- Home -> Circulation -> Checkout
- Search for a user that does not exist (I searched 'whywouldthisexist') on the intranet interface.
- Look at the intranet logs
=> FAIL: you get "Use of uninitialized value $searchtype in string eq at.,,"
- Apply the patch
- Repeat the search
=> SUCCESS: No warning
- Sign off :-D
NOTE: Other pages are more forgiving. Tweaked test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14053: Acquisition db tables are missing indexes
Acquisition db tables are missing some indexes to have
performance queries.
This patch adds an index on some columns very often
used in search queries, such as aqbooksellers.name and
aqbudgets.budget_code.
Also adds an index on aqorders.orderstatus, very often used
with hardcoded value like 'cancelled', in various queries.
Test plan :
1) Back up database
2) $ git reset --hard origin/master
3) $ git bz apply 14053
4) In your mysql client
> DROP DATABASE koha_library;
> CREATE DATABASE koha_library;
> QUIT;
-- Obviously you may need to vary koha_library :)
5) Navigate to staff client
-- should be able to set up the DB just fine.
-- this will catch the comma bug that keeps coming in.
6) $ git reset --hard origin/master
7) Repeat step 4
8) Navigate to staff client
-- nothing tested, but we need the DB set up.
9) $ ./installer/data/mysql/updatedatabase.pl
-- atomic updates run without issue.
10) run koha qa test tools
11) Restore DB
12) Try to compare performance after and before
database update. I think query contained in
C4::Acquistion::GetInvoices could be a good example
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14053: Acquisition db tables are missing indexes - atomicupdates
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 2 Jun 2015 09:39:17 +0000 (11:39 +0200)]
Bug 14314: System Preferences: Better explanation for syspref 'ShowReviewerPhoto'
[PASSED QA] If syspref ShowReviewerPhoto is enabled, the reviewer's avatar is displayed beside comments in OPAC. The avatar will be searched on www.libravatar.org using the patron's email address.
This patch changes the text for 'ShowReviewerPhoto'.
To test:
Apply patch
Go to Home > Administration > System preferences
Search for ShowReviewerPhoto
Verify that the new explanation makes sense.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Better explanation, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed mail to e-mail. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 4 Jun 2015 10:47:13 +0000 (12:47 +0200)]
Bug 14330: Remove unused email_sender from sendbasket/sendshelf
The sendbasket/sendshelf scripts and templates do not use email_sender
as a cgi parameter or as a template var. Probably a leftover from previous
changes.
Let's make Koha cleaner :)
Test plan:
[1] Send your cart from opac or staff.
[2] Send a shelf from opac or staff.
[3] Git grep email_sender. No results.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 4 Jun 2015 10:03:42 +0000 (12:03 +0200)]
Bug 14329: Useless copy/pasta from Template::Plugin::HtmlToText
The synopsis of this TT plugin contains two example lines:
[% myhtml FILTER html2text(leftmargin => 0, rightmargin => 0) %]
[% myhtmltext | html2text %]
These lines have been copied (without too much thought :) to a few templates. Since we do no use the variables myhtml or myhtmltext in these templates, these lines are useless.
Test plan:
[1] Put some items in your cart. And send it.
[2] Send a shelf.
[3] Git grep on myhtml. Should not have results.
NOTE: Sent carts and lists in Intranet and OPAC successfully.
Though, this does bring into question why the letters
have HTML formatting if it is getting removed. That,
however, is beyond the scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Letters.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Letters.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Budgets.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Budgets.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Bookseller.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Bookseller.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Thu, 4 Jun 2015 07:15:24 +0000 (09:15 +0200)]
Bug 14327: Fix js error "TypeError: events is null" in additem.js
If you have no item plugins, the events variable in BindPluginEvents
of additem.js will be null. So testing events.length will generate
the described error.
This patch adds a check to prevent that from happening again.
Test plan:
[1] Do not yet apply this patch !
[2] Temporarily remove framework plugins from your items (in ACQ or default
framework). Probably you have to clear dateaccessioned.pl and
barcode.pl.
[3] Open js console in your browser.
[4] Go to Acquisition. Open a basket and add an order from a new empty
record.
[5] You should see js error: "TypeError: events is null" (additem.js:176)
[6] Apply this patch and reload the page (make sure that you refresh so
that the new javascript code is read).
[7] The TypeError should be gone.
[8] Restore the framework plugins from step 2. Refresh the page again and
verify that they still work as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Thu, 4 Jun 2015 11:13:01 +0000 (07:13 -0400)]
Bug 14318: iDreamBooks doesn't work when Koha is using https
If a Koha server is configured to run over SSL, all iDreamBooks content
is blocked due to the fact that a secure page is requesting an insecure
endpoint. This is due to the fact that the urls for iDreamBooks use http
and not https. A simple fix would be to switch them to https since
browsers have to qualms about loading a secure data endpoint from an
insecure one.
Test Plan:
1) Enable iDreamBooks
2) Set up your OPAC to use https
3) Verify iDreamBooks content continues to work
Note: tested Chrome and IE, so that the IE change would be validated.
Discovered isbn semi-colon issue that is beyond scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 5 Jun 2015 13:58:50 +0000 (09:58 -0400)]
Bug 14342: Unit tests in t/db_dependent/Context.t failing due to Bug 13967
The introduction of system preference objects in bug 13967 has caused
the current testing regimen to fail do to the mixing of DBI mocking and
DBIx::Class.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Context.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14339: C4::Context->preference should return undef if DB is not populated
The current behaviour for C4::Context->preference when the DB is not still
populated with tables is to return undef. This is used by C4::Auth to identify
the need of running the installer.
This behaviour got broken by bug 13967, which lets DB errors to escalate and
thus Koha gets broken instead of prompting for install.
This patch wraps Koha::Config::Sysprefs->find inside an eval and sets undef if needed.
To test:
- In current master, drop the DB
- Load OPAC and Intranet
=> FAIL: notice an ugly software error.
- Apply the patch
- Load the OPAC
=> SUCCESS: Maintenance mode screen is shown
- Load Intranet
=> SUCCESS: You are prompted the DB credentials to run the web installer.
- Sign off :-D
Tomas
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes koha-qa.pl happy by fixing POD issues prior
to this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14346: t/Biblio.t fails because of new warning
Running
$ prove t/Biblio.t
fails because of us now using DBIx to retrieve sysprefs. Then our mocked DBI is not "supported" by DBIx hence a warning that makes our test fail (there is one more warning now).
The cool thing about this, is that it actually helped spot a situation where GetMarcBiblio is doing wrong things because is not checking its parameters are undefined, so we have the chance to fix it.
This patch makes GetMarcBiblio return undef if no biblionumber is passed, and
also raises a conveniently carped warning. This change is tested in t/Biblio.t with new tests.
To test:
- In current master, run
$ prove t/Biblio.t
=> FAIL: a test detects a wrong warning count and fails.
- Apply the patch and run
$ prove t/Biblio.t
=> SUCCESS: Tests now pass, and there are 2 new ones.
- Sign off :-D
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 21 Apr 2015 14:02:01 +0000 (16:02 +0200)]
Bug 10938: Item columns displayed in random order
On the MARC detail page, the columns are displayed in a random order.
This means that you can open 2 different records and see the columns
displayed in a different order.
Test plan:
Go on different MARC detail view and confirm that 1/ all fields are
present and 2/ they always are displayed in the same order
Jonathan Druart [Thu, 16 Apr 2015 07:46:26 +0000 (09:46 +0200)]
Bug 7976: Update borrowers.flags
The borrowers.flags values need to be updated to prevent side effects.
Test plan:
Set the borrow permission flags for some borrowers
Execute the updatedb entry and verify the flags has been updated (-128)
only for borrowers with this permission set.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Moved updatedatabase entry (was in wrong position) to atomicupdate
with commented copy of orignal
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 30 Mar 2015 16:18:16 +0000 (18:18 +0200)]
Bug 7976: Remove the borrow permission
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Tue, 26 May 2015 12:52:07 +0000 (14:52 +0200)]
Bug 14276: Keep highlight on the active item in item editor
The highlight only works on even items.
This patch should resolve it.
Test plan:
Edit biblio with multiple items.
Verify that the highlight is visible on the selected item you edit.
And that there is no highlight for a new item.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14173: Paging on 'recent comments' page in OPAC is not displaying correctly
This patch corrects the display of current page on
a multipage recent comments.
To test:
1) Enable OpacShowRecentComments
2) Add multiple comments to multiple records
I used a script to add multiple lines like
"insert into reviews values ($i, 51, $i, 'Comment $i', 1, '2015-06-01 00:00:00')"
to table reviews
3) On OPAC, go to 'Recent comments', verify the bug
4) Apply the patch
5) Reload and check correct display
Can't found missing space near 'by' from description.
Display is correct for me.
Followed test plan, displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Thu, 5 Sep 2013 05:21:51 +0000 (15:21 +1000)]
Bug 10824: OAI-PMH repository/server not handling time in 'until' and 'from'
This patch removes the DATE() function from a query on timestamp, and adds a
sub that strips the UTC designators "T" and "Z" from incoming "from" and
"until" arguments in OAI-PMH requests so that they're more compliant with
MySQL (and probably other databases as well). This means that the date
and time for the 'from' and 'until' arguments will be matched correctly
in the database.
This patch also adds 'T00:00:00Z' to 'from' arguments and 'T23:59:59Z' to
until arguments, when only dates are provided via the OAI parameters.
The zero time isn't necessary, since MySQL treats '2013-09-30' as
'2013-09-30 00:00:00' by default. However, the near midnight time
is needed for 'until'. Otherwise, you'll never be able to retrieve
a record with a date/time matching the 'until' argument.
In summary, this patch adds handling for times as well as dates, which
is necessary so that Koha is closer to meeting the actual OAI-PMH spec.
TEST PLAN:
0) Note down a selection of timestamps from your biblio table
1) Enable your OAI-PMH server through the global system preferences
Web services tab.
2) Craft and submit a similar request to the following in your browser:
KOHAINSTANCE/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&
from=2013-09-02T13:44:33Z&until=2013-09-05T13:44:33Z
Change the exact dates to accord with your timestamps, but keep the
YYYY-MM-DDTHH:MM:SSZ format.
3) Note the unexpected behaviour. A "from" argument with the timestamp
2013-09-02T13:44:33Z will show records from 2013-09-03 but not records
from 2013-09-02 even though the timestamp in the database will say
"2013-09-02 13:44:33".
Also note that records with a timestamp later than 13:44:33 will show
up for the day 2013-09-05, even though they shouldn't.
4) APPLY THE PATCH
5) Resubmit the links you tried above
6) Note that the applicable records now appear (or do not appear) in
accordance with the precise date/time ranges!
--
Developer Note: We could've not stripped the UTC designators and used
DATE() around the parameters in the SQL queries, but that would have
lost the whole purpose of using times in the "from" arguments, since
they would've been generalized to just the dates.
I think this is probably the best solution. Admittedly, creating
"form_arg" and "until_arg" hashrefs in the ResumptionToken object
might not be ideal, but I preferred that to copying the
_strip_UTC_designator subroutine into two other objects. Perhaps this
sub could go somewhere else and be imported into those other two objects
but this seemed to be the most sensible decision. I'm open to other
opinions though.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, find results with correct timestamp
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The link on the start page of Koha goes to the pending suggestions tab
explicitly. The link on the acquisition start page doesn't do that so
when you have your own status it might show another tab first.
Patch links to be the same and explicitly target the pending tab.
To test:
- create a new suggestion
- verify link from the acq start page leads to the pending tab
- verify link from the Koha start page does the same
Signed-off-by: Marjorie <marjorie.barry-vila@ccsr.qc.ca> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Josef Moravec [Fri, 15 May 2015 09:03:21 +0000 (11:03 +0200)]
Bug 13656: "Change"/"Set to patron" button for linking a member to an organisation (or child to guarantor) not translatable
Test plan:
1. install and activate an additional language
2. create patron in organization category
3. create professional patron
4. try to add this patron to an organization (Guarantor information section)
5. note that the left button text changed to "Change" - untranslated english string
6. push the "Delete" button, the guarantor patron field is cleared and the left button text changed to "Set to patron" - again original english text
7. apply the patch
7.1. update translation (koha-translate -u language_code)
8. repeat 4-6, note, that button text are still translated in all sitations
9. sign off ;)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors
Fixed message capitalization
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 3 Feb 2015 12:25:47 +0000 (13:25 +0100)]
Bug 13662: Fix the serials.receive_serials permissions
There are some issues with serial permissions.
For instance it's not possible to receive serials if the
edit_subscription is not set.
Also the toolbar is empty.
Test plan:
1/ Set the serials => receive_serials permissions to a patron (and only
this one for the serials module).
2/ Verify you cannot create a new subscription, you can search
subscriptions but cannot edit them.
3/ On the serial result list, receive a serial (action > Serial
receive).
You can now change the status and receive it.
4/ On the serial collection, you can edit 1+ serials to reveice it.
5/ Set the serials => edit_subscription permission and confirm there is
no regression.
QA note: I think we should introduce a C4::Serials::can_receive_serials
subroutine, to test the IndependentBranches pref, but I don't want to
add to much processing to check permissions.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 29 May 2015 13:36:34 +0000 (09:36 -0400)]
Bug 14299: Today's checkouts not always sorting correctly
Sometimes the today's checkouts do not sort correctly. This is due to a
simple typo in the comparison line where the bad key 'timstamp' is
compared against the correct key 'timestamp'.
Test Plan:
1) Check out a decent number of items in a row ( 5+ )
2) Hopefully you will see they are sorted incorrectly
3) Apply this patch
4) Reload the page
5) Note they are now sorted correctly
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log