Mirko Tietgen [Sun, 7 Dec 2014 17:39:51 +0000 (18:39 +0100)]
Bug 13404 - More System information about GRS1 vs DOM settings
System information indicates missing <zebra_bib_index_mode> and <zebra_auth_index_mode> entries in koha-conf.xml.
This patch
- adds warnings about a possible mismatch between these settings and the actual setup
- adds info about the actual setup/what values to use for <zebra_bib_index_mode> and <zebra_auth_index_mode> if they are not set.
The assumption is that a path including 'zebra-*-dom.cfg' in the respective section indicates a DOM setup.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Fri, 5 Dec 2014 14:50:05 +0000 (15:50 +0100)]
Bug 13401 - sort branches alphabetically in admin/authorised_values.pl
This patch adds a sort of branches alphabetically by name in authorised values administration, like in many other pages.
Also replaces var $branch (too ambigus) by $branchcode.
Test plan :
- Create 2 branches : code=AAA,name=Zbranch and code=ZZZ,name=Abranch
- Create a new authorized value : admin/authorised_values.pl
- Look at "Libraries limitation" :
=> Without patch branches are sorted by code : Zbranch then Abranch
=> Without patch branches are sorted by name : Abranch then Zbranch
- Select a branch and save
- Re-edit
=> Check the same branch is selected
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 26 Jan 2015 09:28:27 +0000 (10:28 +0100)]
Bug 13352: On editing, prices should not be formatted
Bug 12979 refactored the way to display prices.
The price format configuration was duplicated everywhere it was used.
All calls looks good except the one in admin/aqbudgetperiods.pl
In this one, the prices are formatted for an edition field (input).
This means the input is incorrectly filled even if the user does not
update the field.
At the end, maybe should we manage formatted prices everywhere, even in
inputs, but it's not in the scope of this bug.
Technically, a new subroutine format_for_editing is added to the
Koha::Number::Price module.
It should be called everywhere a price is displayed in an input field.
At the moment, it only does a sprintf("%.2f"), but it is a first step to
let the number of decimals to display configurable.
To test:
1/ Verify the issue described is fixed (editing a budget with a total
amount > 1000 (With CurrencyFormat is US or FR).
2/ Verify you can edit a fund with a total amount > 1000
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Wed, 14 Jan 2015 16:00:17 +0000 (17:00 +0100)]
Bug 13562: Fix item search on item MARC subfields
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13602 - Username/password already exists when editing borrower attributes and messaging preferences
When editing a Patron's messaging preferences or borrower attributes, one cannot
save changes because 'userid' is not given as a parameter.
It shouldn't, but the
Check_Userid($newdata{'userid'},$borrowernumber) -check must have it.
REPLICATE THE ISSUE:
1. Find a Borrower.
2. Go to the details-tab.
3. Under "Patron messaging preferences" click edit to edit just the messaging
preferences.
4. Just save, no need to make any modifications.
5. Observe the error "Username/password already exists"
This happens to all/most of the sub-forms in the Borrower's Details-view.
AFTER THIS PATCH:
Check_Userid() get the $userid from the new parameters, or if not present, from
the koha.borrowers-table.
TEST FOR REGRESSION:
1. Edit a borrower normally. Notice no errors.
2. Edit a sub-form (Alternate address/Patron messaging preferences). Notice no
errors.
DISCLAIMER: You are free to steal/rip/modify/hack this patch to your soul's
extent without my permission. As long as it makes to Koha I am happy.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 28 Jan 2015 17:24:45 +0000 (12:24 -0500)]
Bug 13638 - Batch patron modification tool missing option to switch language
The batch patron modification tool's template was created without the
footer include at the bottom. Without the footer include the language
toolbar will not be displayed.
All page templates should include the global footer include:
[% INCLUDE 'intranet-bottom.inc' %]
To test:
- Install at least a second language
- Enable at least 2 languages (language system preference)
- Go to tools > Batch patron modification
- Verify that at the bottom of the page the language chooser is shown
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I am not able to reproduce this issue after this patch
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 19 Jan 2015 14:05:03 +0000 (15:05 +0100)]
Bug 13418: [QA Follow-up] Use unshift instead of push
Some SQL parameters are added to the wrong side of the list.
This effectively clears all private lists from view :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 8 Dec 2014 15:31:06 +0000 (16:31 +0100)]
Bug 13418: Clean C4::VirtualShelves::Page a bit
I tried to reuse this package for a new development, I did not manage.
It's a really hard to read and to understand.
Here my first try, this patch only remove the call to _shelf_count in
the GetShelves subroutine.
Someone might want to get this value for another reason and from
somewhere else.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 29 Dec 2014 23:04:53 +0000 (00:04 +0100)]
Bug 13450 - Title and breadcrumb of Patron form can look weird in translations
This patch moves the patron category name or category type at the end of title and breadcrumb for better translatability.
Note: It does not change anything in functionallity, it only changes display of strings.
To test:
Apply patch
Search a patron and edit it in all possible ways: 'Edit' button on top of details page, 'Edit' links in details page, 'Edit' links in search result table if multiple patrons are found)
Duplicate a patron
Create a new patron
Make sure that title and breadcrumb appear in a meaningful way with pattern similar to the following:
Modify patron Hansli Meier (Juvenile)
(Missing </div> added)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Mon, 17 Nov 2014 02:59:49 +0000 (13:59 +1100)]
Bug 13262 - Add parameters to XSLT Handler transform method
This patch adds an optional hashref argument to the XSLT_Handler
transform() method. It allows you to send key => value pairs
parameters to the XML::LibXSLT object, which you can reference
in a XSLT via <xsl:param name="XXX" />.
The parameter value is evaluated as an XPath query, so you can only
pass quoted strings (i.e. "'test'") or numbers. Otherwise, the
XSLT engine will interpret it as a Xpath query and will run it
on the XML that you're transforming.
The most common use case is sending strings to a XSLT. In my case,
this is an OAI-PMH identifier that comes in a OAI response but not
the actual metadata. See the following link from the official POD:
http://search.cpan.org/~shlomif/XML-LibXSLT-1.92/LibXSLT.pm#Parameters
_TEST PLAN_
1) Run "perl t/db_dependent/XSLT_Handler.t". If all tests pass,
you should be free to sign off. Feel free to inspect the last
test in XSLT_Handler.t and the XSL in test04.xsl to see how it
works.
If you really want to be thorough, you could write your own test
cases using mine as an example.
Alternatively, you could go into C4::XSLT, and try to pass a
value to a parameter in the search results or the detail page,
but that might be a bit over the top.
It's a pretty simple patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 18 Jul 2014 10:34:07 +0000 (12:34 +0200)]
Bug 12601: Add a foreign key for aqorders.budget_id
When creating an order, the fund value is mandatory but the DB structure
does not show this constraint.
The aqorders.budget_id field should be linked to aqbudgets.budget_id.
The updatedatabase.pl (entry 3.01.00.077) commented this constraint,
certainly for a retro compatibility reason.
Actually I found some cases (in production) where aqorders.budget_id is
set to "0". To add this constraint, we should add a temporary fund to
linked orphan orders.
Test plan:
0/ Verify it is not possible to create an order not linked to a fund via
the Koha interface.
1/ Using your SQL CLI (or equivalent), create or update 1+ orders and set
"0" in the budget_id field.
2/ Execute the updatedabase script.
3/ Verify that your order is linked to a new fund (which is linked to a
new budget).
4/ Verify the constraint has correctly been added (show create table
aqorders).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 29 Jan 2015 15:18:19 +0000 (16:18 +0100)]
Bug 12860: the export tools explodes if a field is not exported
To reproduce:
1/ Go on tools/export.pl
2/ Export some records and specify you don't want the fields 245 (the
whole field, do not specify a subfield).
3/ Export, BOOM
Software error:
Arguments must be MARC::Field object at /home/koha/src/tools/export.pl line 400.
Test plan:
Apply the patch and confirm the fields 245 are not exported and the
export works as expected.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Export fails to asplode with this patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 17 Nov 2014 16:17:49 +0000 (17:17 +0100)]
Bug 13270: Don't display "vendor note" label if nothing to display
Bug 12111 removes the vendor note edition on receiving.
The label should not be displayed when it's empty.
Test plan:
1/ Receive an order without a vendor note and verify that the label is not
displayed.
2/ Receive an order with a vendor note and verify that the note is
displayed.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, small template change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 1 Jan 2015 21:38:34 +0000 (16:38 -0500)]
Bug 13441 - Branchcodes should not be allowed to have spaces in them
In multiple cases I've seen issues arise in Koha where a librarian
accidentally puts a space at the end of a new branchcode. This of course
causes endless confusion because the branchcode looks perfectly fine in
every case unless you wrap the code with some characters to reveal the
hidden space!
Test Plan:
1) Try creating a new branch with one or more spaces in the branchcode
2) Note you are able to
3) Apply this patch
4) Repeat step 1
5) Note you are no longer able to
Followed test plan with cache cleared. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 10 Nov 2014 09:45:25 +0000 (10:45 +0100)]
Bug 12905: funds with children could not be deleted
The interface should prevent to delete funds with children.
Otherwise the relationship is broken and problems occur:
1/ You don't see the orphan fund in the fund list
2/ You cannot edit the orphan fund amount ('Fund amount exceeds parent
allocation').
This patch:
- adds a JS check, template side
- adds a check in the perl script (should never be true)
- adds an updatedatabase check, in order to alert users with inconsistent data.
Test plan:
Verify you are not allow to delete a fund with children.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 25 Nov 2014 11:23:45 +0000 (12:23 +0100)]
Bug 13333: Fix Display basket group for already received orders
Bug 11111 adds a basket group column on the parcel page.
But it seems that the already received orders never contain the value
(always 'no basket group').
Test plan:
Receive an order which is in a basket group and verify the basket group
column is correctly filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 19 Dec 2014 17:28:19 +0000 (12:28 -0500)]
Bug 13457 - Followup for CPL and S codes
Based on comment #3, this corrects CPL and S issues if they do
not exist in the DB.
TEST PLAN
---------
0) Backup your DB.
1) Clear CPL and S from your DB.
- delete from borrowers where categorycode='S';
- delete from categories where categorycode='S';
- delete from borrowers where branchcode='CPL';
- delete from branch where branchcode='CPL';
2) prove t/db_dependent/Suggestions.t
-- This should fail.
3) Apply patch
4) prove t/db_dependent/Suggestions.t
-- This should work.
5) Intentionally add categorycode 'S' and branchcode 'CPL' back
into the database.
6) prove t/db_dependent/Suggestions.t
-- This should work.
7) run koha qa test tools.
8) Restore your DB :)
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 12 Dec 2014 22:03:17 +0000 (17:03 -0500)]
Bug 13457: Suggestions.t expects sample itemtypes
TEST PLAN
---------
1) Make sure you have more than 8 item types, and preferably
something with a non-sample default code for itemtypes.
2) prove t/db_dependent/Suggestions.t
-- this will fail
3) Apply patch
4) prove t/db_dependent/Suggestions.t
-- this will succeed
5) run koha qa test tools
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas [Thu, 15 Jan 2015 01:43:28 +0000 (01:43 +0000)]
Bug 10241 - Easy analyticals creates two 773 fields. Search/link from host to children is broken
Hidden 'New child record' if 'EasyAnalytics' is set to display.
Testing plan:
-Turn on 'EasyAnalytics'. Check the drop down menu from the records page
*The drop down menu should include 'Analyze items' and not include 'New child record'
-Turn off 'EasyAnalytics'. Again check the drop down menu from the records page
*The drop down menu should include 'New child record' and not inlucde 'Analyze items'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 11 Dec 2014 08:50:38 +0000 (09:50 +0100)]
Bug 13268: the size should not be emptied in pl script
It duplicates what the first patch does.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Mon, 17 Nov 2014 15:32:20 +0000 (16:32 +0100)]
Bug 13268 - biblioitems.size value not correctly displayed (more)
Bug partially corrected by Bug 11357.
The size column in biblioitems is a bit problematic when used in TT, because instead of the size value from the biblio column it will give you the size of the variable or current loop.
It's currently used in the templates like opac-topissues.tt :
[% IF results_loo.size %][% results_loo.size %][% END %]
This patch corrects by using item() TT method.
See http://stackoverflow.com/questions/2311303/how-can-i-handle-hash-keys-containing-illegal-identifier-characters-in-template.
Test plan :
- Be sure there is a mapping between a MARC field and biblioitems.size
- Create a record A with biblioitems.size defined : like "10x12"
- Create a record B with no value in biblioitems.size
- Check each modified page :
=> Without this patch : you see a number (loop size) for both records
=> With this patch : you only see the correct value for A and nothing for B
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Thu, 22 Jan 2015 19:25:29 +0000 (14:25 -0500)]
Bug 13339 - Cart button doesn't open the cart
The link to open the cart no longer triggers the cart popup. Instead, in
order to make it more usable with mobile devices, it triggers a menu
which displays the count of items in the cart -- something which
previously was done with a hover action (something touch-screen devices
don't have). Clicking/tapping this menu item is what opens the cart
window.
Since the cart link is really now a menu trigger rather than just a
link, it seems logical to add the small arrow which the lists link
has indicating that the link triggers a menu.
To test, apply the patch and view any page in a Cart-enabled OPAC.
Confirm that the "caret" icon displays correctly when the cart is both
empty and when it has contents.
Followed test plan. Icon displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, good idea.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Thu, 30 Oct 2014 15:36:09 +0000 (15:36 +0000)]
Bug 7904 Change SIP modules to use standard LIB path
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Sun, 9 Nov 2014 22:38:29 +0000 (11:38 +1300)]
Bug 7904 - remove unnecessary path from SIP script
With the fixing of the namespace in the SIP code, we don't need to
modify the PERL5LIB to have the old one.
To test:
* do a package install using this and the other patches on bug 7904
* enable SIP
* make sure koha-start-sip and koha-stop-sip work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 10 Dec 2014 17:27:59 +0000 (12:27 -0500)]
Bug 13432 - SIP Server does not respect timeout setting
Koha's SIP server accepts timeout parameters, but those parameters
are only used for the login portion of a telnet transport session.
Other than that, they are ignored, and as long as whatever opened
the connection keeps it open, it will stay open indefinitely.
Test Plan:
1) Set the timeout setting on your SIP server to 10 seconds
2) Modify misc/sip_cli_emulator.pl, add "sleep 100;" directly after line 91
3) Start your SIP server
4) Run the modified sip script with valid parameters
5) Watch the SIP server stderr
6) Note that even though the script waits far too long before continuing,
the SIP server never kills the connection, and the requests the cli
script makes come back with valid data.
7) Apply this patch
8) Restart your SIP server
9) Repeat step 4
10) Note that this time you see "SIP Timed Out!" in the SIP server
stderr and when the script finally makes it's request, it doesn't
come back with valid data.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 22 Sep 2014 14:09:14 +0000 (16:09 +0200)]
Bug 12975: Use the centralize VAT and prices calculation - basketgroup.pl
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/basketgroup.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Close the basket and create the corresponding basket groups.
4/ Print the basket group
5/ Verify you don't see any difference before and after applying the
patch on the pdf file.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 21 Jan 2015 08:56:42 +0000 (09:56 +0100)]
Bug 13320: Fix "Tax inc." vs "Tax exc."
The parcel page always displayes "Tax exc." even when values don't
include taxes.
Test plan:
On the parcel page, verify that the string "Tax *" is correct.
This appears in the already received order table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 21 Jan 2015 08:51:18 +0000 (09:51 +0100)]
Bug 13320: Move price calculation from tt to pl
In parcel.tt, total are calculated for subtotal.
This could be done in the pl script for more consistency.
Test plan:
Go on a parcel page with several already received orders.
Orders must be linked to different funds.
If possible ecost and unitprice (price on ordering and on receiving)
should changed (different values will be displayed in the table).
The values displayed before and after the patch must be the same.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 20 Jan 2015 12:18:11 +0000 (07:18 -0500)]
Bug 13599 - Add patron cardnumber to self registration confirmation
Some libraries wish to display the patron's cardnumber on the
confirmation screen for patron self registration, rather than make the
patron locate it his or her cardnumber by logging in and browsing to the
personal details page. We should also add ids to these fields for easy
css styling/hiding.
Test Plan:
1) Apply this patch
2) Ensure that autoMemberNum is enabled
3) Self-register a new patron
4) Note confirmation screen now displays the patron cardnumber
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 9 Jan 2015 15:01:35 +0000 (16:01 +0100)]
Bug 13544: Make it explicit that getauthtypes returns a hash ref
Prior to perl 5.12 keys can only operate on a hash.
Test plan:
With perl 5.10, access to admin/auth_subfields_structure.pl.
Without this patch, you get:
Type of arg 1 to keys must be hash (not subroutine entry) at
/home/koha/src/admin/auth_subfields_structure.pl line 102, near
"getauthtypes)"
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed problem and tested patch on a sandbox, signed off locally.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 3 Dec 2014 08:09:19 +0000 (09:09 +0100)]
Bug 13235: Move onclick attr to javacsript code
Refactor 1 line of code and add a preventDefault.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 2 Dec 2014 18:01:21 +0000 (13:01 -0500)]
Bug 13235 - Revise layout of patron search form
Bug 9811 (Patron search improvements) reversed the layout changes made
by Bug 10153. This patch returns to the form to its "stacked" layout.
To test, apply the patch and navigate to the Patrons home page. Expand
the hidden search fields in the search header and confirm that the
layout looks correct. Perform some searches and check that the results
are correct and that the modified search fields retain their state.
Note: This patch contains indentation changes, so please diff
accordingly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rafal Kopaczka [Tue, 20 Jan 2015 09:49:34 +0000 (10:49 +0100)]
Bug 13373 - [QA Followup] - Update Polish web installer sample data files
Fixed "Duplicate entry CF-952-i" error in marc21_simple_bib_frameworks.sql
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rafal Kopaczka [Tue, 2 Dec 2014 14:24:01 +0000 (15:24 +0100)]
Bug 13373 [2/2] - Update Polish web installer sample data files.
Part 2/2 - optional files.
Changes:
- Deleted unnecessary files
- Translated description files and some values in sql files
To test:
- Aplly patch
- Run webinstaller on empty database (drop database and create new if necessary)
- Verify everything works, especially verify you have permission
to all modules, eg. Tools, Catalouging etc.
- Check spelling and grammar if you can :)
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rafal Kopaczka [Tue, 2 Dec 2014 13:14:23 +0000 (14:14 +0100)]
Bug 13373 [1/2] - Update Polish web installer sample data files.
Part 1/2 - mandatory files.
Changes:
- Translated user permission and user flags.
- Changed untranslated different files from en version
- Deleted unnecessary files
To test:
- Aplly patch
- Run webinstaller on empty database (drop database if necessary)
- Verify everything works, especially verify you have permission to all
modules, eg. Tools, Catalouging etc.
- Check spelling and grammar if you can :)
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a little bit of CSS to style the branch checkbox boxes.
I hope that this helps the readability, especially in systems with a
large number of branches.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Wed, 8 Oct 2014 06:12:13 +0000 (19:12 +1300)]
Bug 13040 - multiple branch selections in exporter
This allows the exporter (Tools -> Export) to have any combination of
branches selected, rather than it being all or only one.
Test Plan:
* Apply the patch
* Go to the exporter, see that instead of a dropdown you now have an
elegently laid out grid of branches you can select from
* Select some branches, run the export
* Note that only records with items in the selected branches are
returned.
* Repeat this with the item related options (as that code was refactored
slightly) and make sure everything is sane.
Sponsored-By: South Taranaki District Libraries Signed-off-by: Thomas <tomsStudy@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Wed, 13 Aug 2014 19:26:15 +0000 (15:26 -0400)]
Bug 11961 - This patch fix the QA critical error, fix the capitalization and the UNIMARC support.
http://bugs.koha-community.org/show_bug.cgi?id=11961 Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 30 Dec 2014 13:54:50 +0000 (13:54 +0000)]
Bug 12954: Failed login should retain anonymous session
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 6 Jan 2015 06:54:00 +0000 (06:54 +0000)]
Bug 13521: Add missing semicolon
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 6 Jan 2015 06:48:29 +0000 (06:48 +0000)]
Bug 13521: Removed superflous semicolon
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 5 Jan 2015 22:45:44 +0000 (22:45 +0000)]
Bug 13499: Tidy of Auth.pm
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Wed, 21 Jan 2015 16:23:54 +0000 (17:23 +0100)]
Bug 11927 - Add greek support to CHR (followup)
Small error in word-phrase-utf.chr.
It generates this logs :
17:03:25-21/01 zebraidx(10636) [warn] Map: 'ς' has no mapping
17:03:25-21/01 zebraidx(10636) [warn] duplicate entry for charmap from 'Σ'
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Thu, 22 Jan 2015 13:41:09 +0000 (14:41 +0100)]
Bug 13609: Cross Site Scripting problem in authority search result list paging
To test:
- Use an installation a reasonable amount of authorities, so that you can
have a search result list with more than one page
- Activate OpacAuthorities
- Create an OPAC link like shown below, verify that an alert is shown
- Apply patch
- Refresh the page and no alert should appear
- Verify the paging still works correctly for 'numbers' and 'arrows'
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Chris [Mon, 5 Jan 2015 06:37:51 +0000 (06:37 +0000)]
Bug 13510 : Fixing the third XSS issue
To test
1/ Make sure you have some items in your database, that have values in items.issue
If nessecary do something like
UPDATE items SET issues = 10 WHERE itemnumber=somenumber
2/ Hit a url like http://localhost:8080/cgi-bin/koha/opac-topissues.pl?do_it=1&timeLimit=3%3Cscript%3Eprompt%28924513%29%3C/script%3E
3/ Notice you will get a prompt
4/ Apply patch
5/ Test again
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 24 Jul 2014 08:51:19 +0000 (10:51 +0200)]
Bug 12637: UTF-8 problems when creating a patron list
Encoding problems appear when creating a patron list from the patron search results page.
Test plan:
1. Perform a patron search in the patrons module
2. Select one or more patrons
3. Choose "Add selected patrons to: [ New list ]"
4. Enter a patron list title with UTF-8 characters.
5. The list will be created with bad encoding.
6. Apply the patch and verify there is no bad encoding anymore.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Patch works fine.
Note that I - very ironically - had to remove UTF8 characters from the commit
message to apply and attach the patches with git/git-bz.
Hopefully, an upgrade to a newer git version will resolve that too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas [Wed, 14 Jan 2015 22:57:37 +0000 (22:57 +0000)]
Bug 13583 - Able to view menu for Statistics even when user does not have permission
Added check for borrowers that stops the Statistics link being shown. This could be done through the css but that function currently appears to be broke
Testing Plan:
-Search for a patron with an account that does not have the 'borrowers' permission
*Statistics should not be seen in the menu.
-Change the accounts permissions so they have the 'borrowers' permission
*Statistics should be present in the menu.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 12 Jan 2015 10:28:11 +0000 (11:28 +0100)]
Bug 7143: Release team 3.20
Updated the release team with the roles for 3.20 pages on the wiki and
checked with the votes on the IRC meeting log.
Simplified the section on Former release team members by moving that
information (in a compressed format) to the Developers section.
If someone had a role for multiple releases, I used constructs as 3.X.
Sorted the Additional thanks-section.
Signed-off-by: Justin <justinvos@live.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2015-01-14: Amended. Replaced abbreviations like RM by Release Manager.
Replaced one occurrence of 3.x by 3.X (for Owen).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 19 Nov 2014 12:40:10 +0000 (13:40 +0100)]
Bug 13001: The total for received order should be based on the unitprice
For already received orders, the total should be calculated with the
unitprice, not the estimated cost.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 26 Sep 2014 12:46:21 +0000 (14:46 +0200)]
Bug 13001: Refactor VAT and price calculation - parcel page
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/parcel.pl script.
Test plan:
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Go on the parcel page
4/ You should see, on the "pending orders" table, the same prices as
before this patch.
Note that the prices are now correctly formated.
You could see one change for the supplier configuration 3 (1 0):
If the cost of the item is 82, discount 10% and vat 5%:
The "Order cost" = 140.58 instead of 140.57.
Indeed, before this patch, the order cost was wrong, now you should have
70.29*2 = 140.58
5/ Receive the items and return on the parcel page
Now the "Already received" table with the same prices as before this
patch.
Note some differences too:
- There was a td tag missing, the table was badly formated, it's now
fixed (column below the "Cancel receipt" link).
- The prices are now correctly formated.
- For the configuration 2 (1 1), if the cost of the item is 82, discount
10% and vat 5%:
Note that 7.03 is the "correct" value, but on all other pages, 7.02 is
displayed.
To be consistent, we should display the same prices everywhere.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 7 Jan 2015 13:26:57 +0000 (08:26 -0500)]
Bug 13525 - Date sorting on accounts (fines) tab doesn't work correctly
Date sorting of charges under Patron -> Fines -> Account is done based
on formatted dates, so sorting is broken depending on your dateformat
system preference. This patch implements the standard "title-string"
date sorting method.
To test, apply the patch and view the Account tab. Test sorting of
charges under various settings of the dateformat system preference. Date
sorting should work correctly in all cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes sorting problem.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Justin [Wed, 14 Jan 2015 23:16:29 +0000 (23:16 +0000)]
Bug - 11345 - Self registration captcha
Test Plan
- Open the opac site
- Navigate to the self registration page (Home -> Register here)
- Notice that there is no note stating that the verification box is case-sensitive
- Apply patch
- Refresh page
- Notice that there is now an extra note stating that the verification box is case-sensitive.
Followed test plan. Hint displays as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10606: Remove MySQLism in GetUpcomingDueIssues
To test:
[1] Arrange to have at least one loan in your test database due
one day from now.
[2] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2
and note the number of loans reported.
[3] Apply the patch.
[4] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2 again
and verify that the number of loans reported remains the same.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested with unit tests from bug 10719.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas [Wed, 14 Jan 2015 22:03:40 +0000 (22:03 +0000)]
Bug 13582 - Able to view menu for Circulation History even when user does not have permission
Added check for borrowers that stops the Circulation History link being shown.
This could be done through the css but that function currently appears to be broken.
Testing Plan:
-Search for a patron with an account that does not have the 'borrowers' permission
*Circulation history should not be seen in the menu.
-Change the accounts permissions so they have the 'borrowers' permission
*Circulation history should be present in the menu.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13025 - Software error: Undefined subroutine &C4::Circulation::HasOverdues called at /home/koha/kohaclone/C4/Circulation.pm line 1925
This error only appears when using the SIPServer, it doesn't manifest when using the SIP unit tests
or when using the staff client.
--------------------
------------------
PREPARE THE TEST
------------------
--------------------
0a. Find a borrower.
0b. Find an Item (cardnumber 'debar123') and check-out to the borrower
0c. Find a borrower and add a manual debarrment to it, indefinetely in effect.
This is the default behaviour.
0d. Configure and start a SIP-server which you can access with telnet.
See http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
In this example, the Borrower defined as the Check-out/in machine has the following credentials:
username: herkules password: palautathan branchcode: JOE_JOE
but you are free to use your own, it doesn't affect this test plan.
0e. access your server with telnet
-----------------------
---------------------
REPLICATE THE ISSUE
---------------------
-----------------------
1. Paste the following SIP-command to login:
9300CNherkules|COpalautathan|CPJOE_JOE|
2. Paste the following SIP-command to check-in the Item of the debarred Borrower:
09N20140721 07501620140721 075016AP|AO|ABdebar123|AC|BIN|
3. The connection should die and in the SIP Server's error log you can find the following error:
Software error: Undefined subroutine &C4::Circulation::HasOverdues called at /home/koha/kohaclone/C4/Circulation.pm line 1925
--------------------
------------------
AFTER THIS PATCH
------------------
--------------------
Redo steps 1-2.
3. No error is given and the connection doesn't die.
No unit tests included and never will, because setting up the test environment would be very tedious.
It is entirely possible but the scaffolding required is beyond the scope of this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: I did not test this patch with SIP, but I did not find any
regression on checking or renewing an item.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 4 Dec 2014 14:21:25 +0000 (15:21 +0100)]
Bug 11927 - Small corrections on word-phrase-utf.chr
Small fixes :
more space characters : ¡¿
uppercase AE missing in equivalent
some trailling spaces
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 4 Dec 2014 14:20:29 +0000 (15:20 +0100)]
Bug 11927 - Add greek to word-phrase-utf.chr
Add greek support in word-phrase-utf.chr for searching in a Greek catalog (it can also contain latin records).
Developped in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using CHR zebra indexing
- Index a greek catalog
- Look for results with mixed uppercase, lowercase and diacritics in title
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 4 Dec 2014 13:16:58 +0000 (14:16 +0100)]
Bug 11927 - Add greek chr lang_def file
Add the sort-string-utf.chr for sorting Greek catalog (it can also contain latin records).
Developped in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- Index a greek catalog
- Sort by title and check sorting is correct
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Wed, 12 Mar 2014 11:53:20 +0000 (12:53 +0100)]
Bug 11927 - Add gr install option
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Abby [Thu, 15 Jan 2015 20:28:54 +0000 (20:28 +0000)]
Bug 13587: Fix Authorised Values Toolbar
To test:
1. Go to Home > Administration > Authorised Values
2. Notice no plus icons are appearing infront "New Authorised Value..." and "New Category" in the toolbar.
3. Apply the patch.
4. Check that the plus icons infront of "New Authorised Value..." and "New Category" in the toolbar are appearing as they should.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice addition! I added spaces to match the formatting on the other pages a bit more closely.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas [Wed, 14 Jan 2015 23:26:36 +0000 (23:26 +0000)]
Bug 13584 - Able to view menu for Purchase Suggestions even when user does not have permission
Added check for borrowers that stops the Purchase Suggestions link being shown. This could be done through the css but that function currently appears to be broken
Testing Plan:
-Search for a patron with an account that does not have the 'borrowers' permission
*Purchase suggestions item should not be seen in the menu.
-Change the accounts permissions so they have the 'borrowers' permission
*Purchase suggestions item should be present in the menu.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The page requires borrowers permission, so the link should act accordingly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Same problem for Fines, Circulation history, Notices and Statistics
tabs.
circ-menu.tt is only used from the Fines tab (which is not accessible),
to it's not useful to add this check to it. But for the consistency, it
makes sense. follow-up coming.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 15 Jan 2015 14:20:02 +0000 (15:20 +0100)]
Bug 12861: (follow-up) Noisy warn in error logs
Completely get rid of warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Tue, 2 Sep 2014 21:49:41 +0000 (09:49 +1200)]
Bug 12861 : Noisy warn in the error logs
To test
Hit a url like
cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operatorc=contains&marclistc=mainentry&and_orc=and&orderby=HeadingAsc&value=FIRECLAY
Notice the warns in the error log
Apply patch
Reload the url
Still works but no warns
(cherry picked from commit c98d805e490a82b2ea9f3d4e0f7278640942ba6d) Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reformatted to fix error M Tompsett spotted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Instead of 10 warnings, I now have only 4 warnings.
We're going in the right direction.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Wed, 7 Jan 2015 06:32:06 +0000 (17:32 +1100)]
Bug 13526 - Mandatory fields should not be able to be hidden in borrower self-registration
Currently, mandatory fields in the borrower self-registration can be hidden.
This causes problems since the validator rejects the registration,
even though all required fields on the screen have been filled out.
This is especially a problem when using the system preference
"PatronSelfRegistrationVerifyByEmail", since it automatically makes
"email" a mandatory field.
This patch makes it so that a mandatory field cannot be hidden on
the self-registration page.
_TEST PLAN_
Before applying
1) Hide the "email" and the "emailpro" fields using the
"PatronSelfRegistrationBorrowerUnwantedField" system preference.
2) Make the "email" and the "emailpro" fields mandatory using the
"PatronSelfRegistrationBorrowerMandatoryField" system preference.
3) Note that you cannot see "Primary email" or "Secondary email"
on the self registration page.
(The registration page which can be found by turning
on "PatronSelfRegistration" and filling in
"PatronSelfRegistrationDefaultCategory". The link will be on
opac-main.pl on the right side of the screen under the login box.)
4) Note that you cannot submit a self-registration request as
the system tells you that you have not filled in all the mandatory
fields.
5) Apply the patch && refresh the self registration page
6) Note that you can now see "Primary email" and "Secondary email"
on the self-registration screen".
Signed-off-by: Abby <abbyrobnz@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas [Tue, 13 Jan 2015 23:25:49 +0000 (23:25 +0000)]
Bug 12702 - Suggestions still accessible in OPAC when deactivated
Added check for suggestions turned off. If off user is redirected to 404 error. If patron suggestions are off guest sugestions will also redirect to 404
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 16 Nov 2014 21:52:31 +0000 (22:52 +0100)]
Bug 8096 - card number twice on patron search
This patch removes double patron card numbers from patron search results.
To test:
Search patrons
See card number 12345 in first column and in second column like Testman, John (12345)
Apply patch
Patron card number no longer dispays in second colum
Further testing:
Search for other places in intranet where patron-title.inc is used (git grep 'patron-title.inc')
The card number still should display at the other places.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=8096 Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12973: Additional unit tests for XSLT_Handler.t
The additional way of parameter passing is tested in three additional
tests.
Test plan:
Verify if XSLT_Handler.t passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12973: Allow passing code to XSLT_Handler instead of filename
This patch adds the option to pass a code string to the XSLT handler object
instead of passing a filename.
This is achieved by a change to parameter hashref. The old style parameters
are also allowed.
Note that this patch should not change behavior but will be used in future
development: see bug 12758 or bug 12754.
Test plan:
Verify that behavior did not change in the following steps.
[1] Edit OPACXSLTResultsDisplay in order to use XSLT.
[2] Check search results page in OPAC.
[3] Edit OPACXSLTDetailsDisplay in order to use XSLT.
[4] Check detail page in OPAC.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rochelle [Wed, 14 Jan 2015 22:49:59 +0000 (22:49 +0000)]
Bug 13571: Koha-conf.xml.in has fallen out of sync with koha-conf.xml
To test:
1- Build new koha packages
2- Check that the conflist file contains the changes we have made
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Morag Hills [Tue, 13 Jan 2015 21:16:53 +0000 (21:16 +0000)]
Bug 13570 - koha-conf.xml mentions win32
Issue existed in koha-conf.xml of /etc.
The following lines were removed from the file:
<!-- uncomment these lines and comment out the above if running on MSWin32 -->
<!--
<listen id="biblioserver" >tcp:localhost:9998/bibliosocket</listen>
<listen id="authorityserver" >tcp:localhost:9999/authoritysocket</listen>
-->
This section was located on lines 9, 10, 11, 12 and 13 of the koha-conf.xml file.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 12 Jan 2015 08:35:51 +0000 (09:35 +0100)]
Bug 13554: t/Prices.t shouldn't depend on the DB
To reproduce:
- Stop your MySQL server:
$ sudo service mysql stop
- Run
$ prove t/Prices.t
=> FAIL: some tests fail because of mysql stopped
To test (MySQL still stopped)
- Apply the patch
- Run
$ prove t/Prices.t
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 14 Jan 2015 08:54:40 +0000 (09:54 +0100)]
Bug 13577: Add the utf8_unicode_ci COLLATE to all tables
Bug 11944 added the COLLATE=utf8_unicode_ci to all DB tables.
But some new tables have been created between the write of the patch set
and the push to master.
So these new tables don't have the correct collate.
Test plan:
0/ Reproduce the error:
mysql> create database koha_test CHARACTER SET utf8 COLLATE utf8_unicode_ci;
mysql koha_test < installer/data/mysql/kohastructure.sql
It will boom with:
ERROR 1005 (HY000) at line 3493: Can't create table `koha_test`.`items_search_fields`
(errno: 150 "Foreign key constraint is incorrectly formed")
1/ Apply the patch, destroy the DB and recreate it:
mysql> create database koha_test CHARACTER SET utf8 COLLATE utf8_unicode_ci;
mysql> drop database koha_test;
mysql koha_test < installer/data/mysql/kohastructure.sql
All tables should be inserted without any error.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Aug 2014 15:03:32 +0000 (17:03 +0200)]
Bug 12845: C4::Output::FormatData can be removed
Test plan:
git grep FormatData
should not return any result in pl and pm files.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 4 Dec 2014 15:27:04 +0000 (16:27 +0100)]
Bug 13393: Remove C4::VirtualShelves::Merge
This is empty (?)
Test plan:
git grep 'VirtualShelves::Merge'
should not return anything.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 29 Aug 2014 10:53:07 +0000 (12:53 +0200)]
Bug 12850: C4::Serials::GetLateIssues can be removed
This routine is not used and can be removed.
Test plan:
git grep GetLateIssues
should not return any result
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 8 Jan 2015 11:59:26 +0000 (06:59 -0500)]
Bug 13537 - Focus should move to barcode after renewing via checkouts table
Koha's checkout screen automatically focuses on the barcode field each
time it is loaded. Since we've moved the checkouts table functions for
renewing and returning items to ajax methods, this page is no longer
refreshed, and thus does not refocus to the barcode after performing
those actions. This should be fixed so that renewing/returning items via
the checkouts page moves the focus to the barcode field.
Test Plan:
1) Find a patron with checkouts.
2) Renew or return a checkout, note the focus does not move to the
barcode.
3) Apply this patch.
4) Renew or return a checkout, note the focus *does* move to the
barcode.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Thomas <tomsStudy@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rochelle [Tue, 13 Jan 2015 02:01:49 +0000 (02:01 +0000)]
Bug 13564: Items search: rename Stock number to Inventory number
To test:
- Go to Advanced search
- Click on link 'go to item search'
- Check the search options in the second section for "Stock number"
- Do a search and note the column name appears as "Stock number"
- Apply patch
- Try the search again and check that "Inventory number" shows
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log