David Cook [Thu, 15 Feb 2024 02:49:18 +0000 (02:49 +0000)]
Bug 36098: Add Koha::Session module to ease session handling
This patch adds a Koha::Session module that makes it easier
to work with Koha sessions without needing the full C4::Auth module.
Test plan:
0. Apply the patch
1. Run the following unit tests:
prove ./t/db_dependent/Auth.t
prove ./t/db_dependent/Auth_with_cas.t
prove ./t/db_dependent/Koha/Session.t
2. Observe that they all pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 30 Jan 2024 08:02:19 +0000 (09:02 +0100)]
Bug 35935: Ensure login branch will be used after incorrect login
If a different branch is selected after an incorrect login, the previous
branch will be used.
To recreate:
* login with foo/bar, select CPL => FAIL
* login with koha/koha, select another branch => OK but CPL is picked!
It was caused by a dup of "branch" in CGI param list (and first was
picked).
This patch patch also removes "koha_login_context" to not have it twice.
You can also open the source of the page to confirm that form#loginform
contains "branch" and "koha_login_context" in hidden inputs.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tested in KTD. Works as advertised. Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 26 Jan 2024 07:58:17 +0000 (08:58 +0100)]
Bug 35918: Fix auto library connect (AutoLocation)
This code is a bit weird, its purpose it to auto select the library depending on the IP.
A problem appears if the same IP is used, then the user's choice will
might be overwritten randomly by another library.
To recreate the problem:
Turn on AutoLocation
Use koha/koha @CPL for test
And the following config:
*************************** 1. row ***************************
branchcode: CPL
branchname: Centerville
branchip: 172.18.0.1
*************************** 2. row ***************************
branchcode: FFL
branchname: Fairfield
branchip: 172.18.0.1
*************************** 3. row ***************************
branchcode: FPL
branchname: Fairview
branchip: 172.18.0.4
Connect and select CPL. Randomly FFL will be picked instead.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tested this on top of 35890 and 35904 because git bz said they were required dependencies.
Figured out the IP Koha was seeing me as coming from in /var/log/koha/kohadev/plack.log.
Added that IP to the branchip for Centerville, Fairfield and Fairview. Set AutoLocation = Yes.
After this I could recreate the problem: If i left the "Library" field in the login screen
at "My Library" I got logged into a random library selected from the three i had set
branchip for. Applying the patches fixed this, as expected.
Tests pass, with AutoLocation off.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 25 Jan 2024 09:35:41 +0000 (10:35 +0100)]
Bug 35904: Make C4::Auth::checkauth testable easily
This patch suggests to add a new flag do_not_print to
C4::Auth::checkauth to not print the headers and allow to test this
subroutine more easily.
We do no longer need to mock safe_exit and redirect STDOUT to test its
return values.
There are still 3 left:
1.
733 # checkauth will redirect and safe_exit if not authenticated and not authorized
=> Better to keep this one, not trivial to replace
2.
806 # This will fail on permissions
This should be replaced but testing $template->{VARS}->{nopermission}
fails, I dont' think the comment is better.
3.
828 # Patron does not have the borrowers permission
Same as 2.
2. and 3. should be investigated a bit more.
This patch also move duplicated code to set patron's password to a
subroutine set_weak_password.
Test plan:
Read the code and confirm that everything makes sense.
QA: Do you have a better way for this? Yes it's dirty!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 16 Jun 2021 10:04:42 +0000 (11:04 +0100)]
Bug 34426: Add xt/find-missing-csrf.t
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Andreas Jonsson [Mon, 12 Feb 2024 11:16:02 +0000 (11:16 +0000)]
Bug 35930: Add guards for plugins_enabled
The 'new' method in Koha::Plugins returns undefined if
plugins are disabled. Therefore, calls to this method
must be guarded by a check that plugins actually are enabled.
Test plan:
* Code inspection of patch, alternatively
* Activate the ill system by installing a backend such as
koha-illbackend-libris:
https://github.com/Libriotech/koha-illbackend-libris
* Make sure plugins are disabled in koha-conf.xml
* In the staff interface, go to ILL requests.
* The page should load without getting an error 500.
PA amended commit message: This is not related to ILL backends being plugins or not
This is about ILL batches, where checking for metadata enrichment plugins was missing 'enable_plugins' guard
Additionally, unrelated to batches, it's also about ILLAvailability, where checking for ILL availabililty plugins was missing enable_plugins guard
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Hans Pålsson <hans.palsson@hkr.se> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 26 Jan 2024 14:10:01 +0000 (14:10 +0000)]
Bug 35518: Check authentication and set userenv before fetching userenv variables
Currently we get the userenv before we have set it correctly for the session
To test:
1 - Sign in as a user with fast cataloging permission
2 - Bring up a patron, type gibberish into barcode field to get a fast cataloging link
3 - Check the link, it should have your current signed in barcode
4 - Sign in to a different browser with a different user and at a different branch
5 - Bring up a aptron in circulation and type gibberish into barcode field to get a fast cataloging link
6 - It may have your branch, but it may also have the other user's branch from the other window
7 - Keep entering gibberish to get a link until one user has the correct branch
8 - Then switch to the other browser, and keep entering gibberish, watch the branchcode change
9 - Apply patch, restart all
10 - Test switching between browsers. generating fast cataloging links
11 - Users should now consistently have the correct branch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Andreas Jonsson [Thu, 8 Feb 2024 10:57:03 +0000 (11:57 +0100)]
Bug 36034: (bug 34893 follow-up) fix capture of return values from checkpw
Adapt code to the change of return value type of checkpw
introduced in bug 34893
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 11 Jan 2024 11:14:27 +0000 (11:14 +0000)]
Bug 29002: Remove whitespace only lines
Jonathan highlighted some trailing whitespace.. I only see a few cases
where a line only contains whitespace and I didn't see these caught by
the QA script at the time of submission.
This patch introduces some tests on the current (and new) behavior for
the `checkpw` function.
I needed it to better understand if an edge case was actually possible
(it wasn't).
Found a really minor annoyance for the internal check with expired
password not returning the $patron object for consistency with the other
use cases.
I think this method deserves (at least) changing the return value to a
sane data structure. But that's not target for backporting to stable
releases. So a separate bug.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 1 Dec 2023 11:29:19 +0000 (06:29 -0500)]
Bug 34893: (QA follow-up) Tidy code for qa script
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 22 Sep 2023 18:20:59 +0000 (14:20 -0400)]
Bug 34893: ILS-DI can return the wrong patron for AuthenticatePatron
Imagine we have a set of users. Some of those users have a NULL userid. We then call AuthenticatePatron from ILS-DI for a patron with a NULL userid, but a valid cardnumber. We call checkpw, which returns the cardnumber and userid. We then call Koha::Patrons->find on the userid *which is null*, meaning the borrowernumber returned is not the correct one, but instead the earliest patron inserted into the database that has a NULL userid.
Test Plan:
1) Give three patrons a userid and a password
2) From the database cli, set all patrons's userid to null
Run this query: update borrowers set userid = null;
3) Call AuthenticatePatron with username being the 1st patron cardnumber,
and password being the password you set for that patron
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=kohacard&password=koha
4) Note you get back a borrowernumber for a different patron. Refresh the page and the number is correct.
5) Do the same with the 2nd patron. Same issue at 1st and correct number after.
6) Apply this patch
7) Restart all the things!
8) Do the same with the 3rd patron.
9) Note you get the correct borrowernumber! :D
10) prove t/Auth.t t/db_dependent/Auth_with_ldap.t t/Auth_with_shibboleth.t t/db_dependent/Auth_with_cas.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Wed, 29 Nov 2023 17:18:32 +0000 (17:18 +0000)]
Bug 34893: Add unit tests
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 9 Nov 2023 18:06:03 +0000 (18:06 +0000)]
Bug 34862: (follow-up) Fix some misplaced messages and add missing
This patch fixes some templates where the messages include was appearing
in the wrong place, for instance above the left-hand sidebar instead of
at the top of the main content.
The patch also adds the new include to some templates which lacked it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 8 Nov 2023 16:41:02 +0000 (16:41 +0000)]
Bug 18397: Add message delivery details to the notices tab
This patch adds further delivery details to the notices tab in patron
details in the staff client.
Once a message is sent, we display the 'from:', 'to:' and 'cc:'
addresses in the 'Delivery note' column when they exist.
Test plan
1. Enable KTD to send email [1] (without email configured the
delivery note displayed "Unhandled email failure, check the logs for
further details").
2. Add email addresses to two patrons and to KohaAdminEmailAddress,
and run misc/cronjobs/process_message_queue.pl after generating
notices.
3. For the two patrons with email addresses, make one a guarantor.
4. Sent Welcome messages (Patron account > More > Send welcome email) -
nothing in delivery note column.
5. Checkout out an item to the guarantee (item checkout email enabled) -
nothing in delivery note column.
6. Send the notices by running misc/cronjobs/process_message_queue.pl
again.
7. Now the 'Delivery note' columns should contain from:, to: and cc:
address details.
[1] Option 1 - smpt-sink (aka the sandboxes way)
- Install the postfix package inside ktd (sudo apt install postfix)
When asked in the wizard, I named mine 'local'
- Start smpt-sink with
`nohup smtp-sink -u root -D mail 127.0.0.1:25 100 </dev/null >/dev/null 2>&1 &`
Option 2 - To test sending emails using a Google account:
- Set up an App password for your Google Account
- Edit /etc/koha/sites/kohadev/koha-conf.xml file and add this
configuration near the end (where <user_name> = your Google email
address; <password> = your APP password, not your Google account
password):
Pedro Amorim [Mon, 18 Dec 2023 12:51:16 +0000 (12:51 +0000)]
Bug 35479: (QA follow-up): Tidy
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 5 Dec 2023 13:40:48 +0000 (13:40 +0000)]
Bug 35479: (follow-up) Match formatting for other cronjob logs
To test:
1 - Install the Kitchen Sink plugin
2 - Restart all
3 - Enable 'CronjobLog' system preference
4 - perl misc/cronjobs/plugins_nightly.pl
5 - Note you see on the command line 'Remember to clean the kitchen' - this indicates the plugin cron ran
6 - Tools->log viewer, select 'cronjob' and view
7 - Note you only see 'plugins_nightly.pl' Run and End lines
8 - Apply patches
9 - perl misc/cronjobs/plugins_nightly.pl
10 - View logs agian
11 - Note you now see Run and End lines for 'Koha::Plugin::Com::ByWaterSolutions::KitchenSink'
12 - Confirm they look like the other lines
13 - Edit KitchenSink.pm and add 'die "Kittens";' to the cronjob nightly
14 - perl misc/cronjobs/plugins_nightly.pl
15 - View logs, confirm there is a FAILED error message for the KitchenSink cron
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Mon, 4 Dec 2023 17:41:32 +0000 (12:41 -0500)]
Bug 35479: Log start, end, and any failures for each plugin's nightly cronjob
When running the plugins_nightly.pl cronjob, we should record the plugins that have a nightly method, logging the start and end of each plugins routine
Test Plan:
1) Enable CronjobLog
2) Install a plugin with a nightly cronjob ( e.g.
https://github.com/bywatersolutions/koha-plugin-book-list-printer )
3) Run plugins_nightly.pl
4) Note new entries in the cronjob viewer for the start and end of the
plugin's nightly cronjob run
5) Edit the plugin, add a line like "die 'this is a test';" to the
plugin's nightly cronjob
6) Run plugins_nightly.pl
7) View the action logs, not the log for the error you added!
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Tue, 5 Dec 2023 15:51:35 +0000 (15:51 +0000)]
Bug 35490: Remove GetMarcItem from C4::Biblio module
Test plan:
Compile module, run qa tools.
Search for the use of C4::Items in C4/Biblio.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 14 Jul 2023 15:46:56 +0000 (15:46 +0000)]
Bug 34282: Fix availability check in ILL batches
Staging modal area had issues listing availability checks for each request in the batch creation process
To test:
1) Run bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev-plus.sh)
2) Install a metadata enrichment plugin, e.g. https://github.com/PTFS-Europe/koha-plugin-api-pubmed/releases
3) Install and configure an availability plugin, e.g. eds https://github.com/PTFS-Europe/koha-plugin-ill-avail-eds/releases
4) Enable ILLCheckAvailability sys pref
5) Create a new ILL batch and input some pubmedids, i.e. 34898594, 31452466
6) Verify that the availability results show and are working, for each request in the batch
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk> Sponsored-by: UKHSA (UK Health Security Agency) Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 23 Nov 2023 09:08:18 +0000 (09:08 +0000)]
Bug 35389: Hide 'Transfer to send' if StockRotation disabled
Test plan:
Disable StockRotation pref. Check if report is hidden on circ home.
Enable. Check if report is visible.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35951: Remove useless include category-out-of-age-limit.inc
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 30 Nov 2023 09:34:54 +0000 (10:34 +0100)]
Bug 32474: Store the selected option label
It prevents the label to be removed when the selected option is not
longer in the item list.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 3 Oct 2023 08:22:46 +0000 (10:22 +0200)]
Bug 32474: Pass label and identifier
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 3 Oct 2023 14:30:46 +0000 (16:30 +0200)]
Bug 32474: Adjust tests
We need to use the same data, for instance we had "license name" and
"first license name" for the license with license_id=1
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 3 Oct 2023 07:59:24 +0000 (09:59 +0200)]
Bug 32474: Adjust tests - X-Total-Count
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 3 Oct 2023 07:58:27 +0000 (09:58 +0200)]
Bug 32474: Fix required
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 29 Sep 2023 15:08:02 +0000 (15:08 +0000)]
Bug 32474: Fix scroll bump when new data loads
This patch addresses an annoying scroll bump when new data loads. Previously the
scrollbar would jump all the way to the top of the selct before resetting, this
has now been stopped.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 27 Apr 2023 14:39:04 +0000 (14:39 +0000)]
Bug 32474: Fix duplicate API call
This patch fixes a duplicate API call and fixes the "required" attribute
Test plan as before
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 27 Apr 2023 06:56:39 +0000 (08:56 +0200)]
Bug 32474: Properly call getAll
To encode q parameter correctly, based on bug 33623
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 27 Apr 2023 06:54:25 +0000 (08:54 +0200)]
Bug 32474: Do not fetch all the licenses
Otherwise we are loosing all the point of the pagination!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 21 Apr 2023 10:57:43 +0000 (10:57 +0000)]
Bug 32474: Infinite scroll v-selects
This patch is an example ajax based v-select. The v-select will load the first
20 items and then continue to load paginated sections of 20 items as the user
scrolls down. The v-select also offers ajax based searches (unpaginated) and
will return to 20 item pagination if the search is cleared.
Currently the pagination just works with an Intersection Observer based on
scrolling - the main issue with this is that the size of the v-select window
changes every time new data is added to the list and this causes the scrollbar
to jump before resetting at the correct size. This can be a bit annoying,
especially when scrolling quickly.
The only way round this will either be to paginate using buttons i.e.
(previous/next page) or to limit the data to 20 items at all times and
re-paginate when scrolling back up - interested to hear thoughts/suggestions
on this or whether anyone has a magic CSS fix that solves it ;)
The new v-select is only in one location so far as a test - Agreement Licenses
Test plan:
1) You will need to add multiple licenses in order to see the pagination,
attached is a script that will create 100 dummy licenses at a time if you
wish to use that
2) Once licenses are created, apply patch and run yarn build
3) Navigate to Agreements and click the New Agreement button
4) Scroll down to the Add new license option and click the button
5) The License select is the InfiniteScrollSelect and should display the
licenses you have added
6) Open the dropdown and 20 items will be listed
7) Scroll down and as you scroll, more items will be loaded (this can be seen
in the Network tab in developer tools)
8) Enter a search query and the results should reflect the search query
9) Delete the search query and the dropdown should return to the first 20
paginated items and pagination will work again when scrolling
10) Try submitting the form with paginate/searched options and the form should
still work as intended
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lari Taskula [Mon, 4 Dec 2023 22:51:45 +0000 (22:51 +0000)]
Bug 35483: Restore holds table select to switch item level holds to record level holds
To test:
1. Apply patch
2. Add item level hold to a record/item, make sure patron has no other
holds on that record
3. Go to /cgi-bin/koha/reserve/request.pl?biblionumber=xxx where xxx is
the record you placed the hold for
4. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>" dropdown
5. Select "Next available" from the dropdown
6. Click Update hold(s)
7. Observe dropdown is gone and cell value has changed from
"Only item <barcode>" to "Next available"
8. Cancel the hold and add two item level holds for the same patron
9. Under "Existing holds" table, in "Details" column you should see
"Only item <barcode>", but no select dropdown
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 30 Jan 2024 09:04:45 +0000 (10:04 +0100)]
Bug 35936: Fix saving existing report with incorrect AV category
When an existing report is saved and an incorrect AV category is selected,
the UI is asking "do you want to save anyway", but the "Update SQL" button
leads to a blank page and the report is not saved.
On bug 33966 the value is been adjust to 'update_sql' but this incorrect
was left.
To test you need to use the browser inspector to adjust the value of the
selected option.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sat, 6 Jan 2024 19:57:04 +0000 (19:57 +0000)]
Bug 35300: Add page-section to invoice files page
To test:
* Enable AcqEnableFiles system preference
* Go to acquisitions
* Search for a vendor and receive shipment
* Enter an invoice number and create new invoice
* Finish receive
* Click on 'manage invice files' link
* Upload a sample file
* Verify the table is missing the usual white background
* Apply patch
* Verify the the table now displays with the usual white
background
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35406: Fix typo in holds queue viewer template
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Fri, 12 Jan 2024 23:51:14 +0000 (23:51 +0000)]
Bug 35368: Add public to "Add a new checkout" in API documentation
Without this patch the "Add a new checkout" label showed
up twice in the Checkouts section of the API documentation.
This adds (public) to the end of one, to make it possible
to distinguish them.
To test (ON YOUR HOST MACHINE):
1. Run:
$ cd api/v1/swagger
$ docker run --rm -v $(pwd):/api --workdir /api redocly/cli \
build-docs swagger.yaml --output index.html
2. Open the generated index.html in your browser
3. Verify doubled up headings
4. Apply patch
5. Re-run docker command form 1.
6. Verify there are now 2 different labels and "(public)" is on the
right one.
Note: if you have wrong permissions on the file, chown it to your
own user to open it in the browser.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Tue, 19 Dec 2023 02:47:12 +0000 (02:47 +0000)]
Bug 30230: (follow-up) fix unit test
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Fri, 8 Dec 2023 08:46:16 +0000 (09:46 +0100)]
Bug 30230: (follow-up) Fix display issue on search bar
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Thu, 30 Nov 2023 14:14:42 +0000 (15:14 +0100)]
Bug 30230: Add new 'list_borrowers' permission
When a patron search is performed only a user with edit_borrowers
permission can search by name. Search can works only with cardnumber but
it makes searching less intuitive I think.
So, as mentioned in the discussion, I've added a new 'list_borrowers' permission,
completely independent of 'edit_borrowers', so that I can search for a member via the interface
and get the results. In addition to the permission to perform check in and checkouts, this no longer poses an obstacle to simple use.
Test plan:
1) Check with a user without 'edit_borrowers' permission that the patron search can only be performed with cardnumber
2) Apply this patch
3) Make the updatedatabase to add new 'list_borrowers' permissions
4) Set 'list_borrowers' permission on one user and see the difference
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Wed, 17 Jan 2024 15:45:53 +0000 (15:45 +0000)]
Bug 35535: Allow for cancellation of holds with or without a reason
TO TEST:
1. Have a waiting hold on a particular barcode
2. Have at least 1 HOLD_CANCELLATION auth value
3. Check in the barcode and try to cancel the hold on the modal while
selecting a reason.
=> SUCCESS: You can cancel a hold when selecting a reason.
4. Repeat 1-3 but not selecting any reason.
=> SUCCESS: Hold cancelled correctly.
5. Delete all HOLD_CANCELLATION auth values.
6. Repeat Try 1-3
=> SUCCESS: No reason displayed
=> FAIL: Cancelling does nothing. There's an error in the browser
inspector
7. Apply this patch
8. Repeat 1-3
=> SUCCESS: No reason displayed
=> SUCCESS: Cancelling works
9. Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: amended the test plan to make it clearer Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 9 Jan 2024 21:57:49 +0000 (21:57 +0000)]
Bug 35753: Remove Checkbox() function
To test:
1. APPLY PATCH and clear browser cache.
2. Have multiple additional content items ( news/HTML customization/Pages )
3. From one of the pages ( news/HTML customization/Pages ) click the 'Delete selected' button. Since no items are checked you should see the 'Please select content to delete' alert.
4. Check some items and click 'Delete selected' they should be correctly deleted.
Note: There is no change in behavior from this patch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Fri, 12 Jan 2024 18:05:22 +0000 (18:05 +0000)]
Bug 35774: Use itemnumber instead of biblioitemnumber
With Bug 33639 already pushed to master there should be NO change in behavior.
To test:
1. APPLY PATCH
2. Create one or more item groups for a bib if needed
3. Create a new item, and at the bottom of the 'Add item' screen, select the item group to which you want this item added. Save.
4. The item should succesffuly be added to the item group.
5. Add a new item and to the same record and this time try the 'Create a new item group' from the dropdown.
6. Name the new item group.
7. Make sure it is correctly added to the item group.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 16 Jan 2024 17:11:23 +0000 (17:11 +0000)]
Bug 34853: Switch to 'div' as suggested
This patch switches us from '<span class="clearfix">' to '<div>' so
we're just using a block level elemenet instead of manipulating an
inline element to act like a block.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
lmstrand [Fri, 24 Nov 2023 12:08:21 +0000 (14:08 +0200)]
Bug 35396: Replace Datatables' column filters throttling with input timeout
This patch replaces throttling filter events with a typing timeout for datatable filtering events. This patch should increase filtering responsiveness to datatables that have column filtering enabled across Koha.
To test:
1) Get a datatable with multiple results showing in intranet, for example search patrons with no search string to get all patrons in a filterable datatable result view or open Receive orders page that shows pending orders and order lines in Acquisitions like /cgi-bin/koha/acqui/parcel.pl?invoiceid=xxx
2) Type a character into a Datatable column filtering field
=> notice a filtering event fires right after the first character has been entered
3) Keep typing
=> notice multiple sequential filtering events being fired during the typing and one at the end when typing has stopped
4) Apply patch
5) Start typing into a filtering field
=> Note that during typing no filtering events are being fired unless the time between entering characters exceeds 500ms
6) End typing into the filter field
=> notice that just one filtering event fires at the end of typing if characters were entered sequentially faster than 500ms apart.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Mon, 4 Dec 2023 05:24:01 +0000 (05:24 +0000)]
Bug 35445: Require OPAC user to confirm self-registration with button push
This change requires the OPAC user to confirm self-registration with
a button push when verifying registration using an emailed token.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Set syspref PatronSelfRegistrationVerifyByEmail to "Don't require"
2. Create a patron using the self-registration on the OPAC
3. Note that no confirmation step is needed when self-registering
4. Set syspref PatronSelfRegistrationVerifyByEmail to "Require"
5. Create a patron using the self-registration on the OPAC
6. Look in message_queue to find the URL with the token to
visit in the browser
7. Visit that URL
8. Note that the page says "Registration pending" and asks you to
click a button labeled "Confirm"
9. Click the button labeled "Confirm"
10. Note that the self-registration is confirmed and details are
shown on the page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Thu, 7 Dec 2023 16:06:55 +0000 (17:06 +0100)]
Bug 35514: Fix total cost update when adding multiple items to order
Test plan:
1) Create a basket and add an order line to go on neworderempty.pl
(the new order form)
2) Choose to add one item and repeat the operation
3) See on form that the total cost is updated without update vendor
price
4) Now add multiple items, for example, "2" you will see that the total
cost is not updated
5) Apply this patch, refresh form and repeat steps 3 to 5
Signed-off-by: Michał Dudzik <dudzikmichal@wp.pl> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fridolin Somers [Mon, 8 Jan 2024 13:22:29 +0000 (14:22 +0100)]
Bug 35530: Tell UserCSS and UserJS in libraries administration are for OPAC
In libraries administration new fields UserCSS and UserJS are for OPAC,
this should be in label.
This patch uses text "Specific OPAC CSS", since the system preference OPACUserCSS as help :
Library specific CSS can be defined in ...
Test plan
1) Go to Administration > Libraries
2) Modify a library
3) Check you see new labels
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 12 Jan 2024 15:54:49 +0000 (16:54 +0100)]
Bug 35578: Simplify the code using intersect
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Fri, 15 Dec 2023 00:14:05 +0000 (00:14 +0000)]
Bug 35578: Validate "Where" in OPAC Authority search
This patch adds validation to the "Where" field in OPAC Authority search.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Go to http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl
2. Type "test" into "Term(s)" field
3. Click "Submit"
4. Confirm a result is found
5. Repeat the above using "Where" values of "in the complete record",
"in any heading", and "in main entry"
6. Using the HTML inspector in the browser, change the value of
the selected option of the "marclist" select element to
"this is broken"
7. Click "Submit"
8. Confirm a result is found (ie it's not throwing a fatal error
anymore)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 5 Jan 2024 11:17:53 +0000 (12:17 +0100)]
Bug 35742: Fix removal of added user from fund
On the fund edition page, if a new user is added the "Remove" link does
not remove the user.
Test plan:
0. Do not apply this patch
1. Edit a fund
2. Click "Add users"
3. Search for patron and add some users
=> Notice that the "Remove" link does not remove the user
4. Apply this patch and repat 1, 2, 3
=> Notice that the "Remove" link remove the user
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 5 Jan 2024 11:01:55 +0000 (12:01 +0100)]
Bug 35743: Fix patron's category selection in the column filter
The "category" filter is not selected in the column filter dropdown.
Test plan:
0. Do not apply this patch
1. Search for patron, select a patron's category
=> Notice that the "Category" column has a column filter, but no
option is selected
2. Apply the patch
3. Repeat 1
=> The "Category" column has the option you selected in the filter
block.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 9 Jan 2024 12:16:40 +0000 (13:16 +0100)]
Bug 35745: Fix 'Set suggester' of a suggestion
On the suggestion edit form, if a suggester is selected using the "Set
to patron" (and patron search), the details of the selected patron will
contained "undefined" for the library's name and patron's category
description.
Test plan:
Edit a suggestion, click "Set to patron", select a patron
Notice that with this patch the library's name and patron category is
correctly displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Notice that you now have _strings which contains the library's name and
patron category's description
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 23 Jan 2024 17:53:39 +0000 (17:53 +0000)]
Bug 35800: Remove item.can.be.edited check
To test:
APPLY PATCH
1. Check out an item to a patron from library A
2. Give permissions to a patron from library B
(example of a circulation staff account)
- circulate
- catalogue
- borrowers ( including view_borrower_infos_from_any_libraries )
- reserveforothers
- updatecharges
- suggestions
- lists
- clubs -> enroll
3. If necessary, change the username and password of that staff member in order to be able to log in
4. In a private browser window, log in as the staff member
5. View the record with the checked out item
6. You should see the name/cardnumber of the patron the item is checked out ot.
7. Turn off the view_borrower_infos_from_any_libraries for this patron.
8. Now on the record detail page you should see text like `Checked out to A patron from library Midway : due 01/28/2024`.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 18 Jan 2024 13:46:45 +0000 (14:46 +0100)]
Bug 35833: Silence few warnings from searching
Resolve:
[2024/01/18 11:31:24] [WARN] Use of uninitialized value $hits in numeric eq (==) at /usr/share/koha/opac/opac-search.pl line 612.
[2024/01/18 11:31:24] [WARN] Use of uninitialized value $times in subtraction (-) at /usr/share/koha/C4/Search.pm line 1715.
Test plan:
Look for a few search expressions without results.
Check log without and with patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Thu, 18 Jan 2024 13:39:55 +0000 (14:39 +0100)]
Bug 35833: Fix warnings from C4/Koha
[2024/01/18 11:52:40] [WARN] Argument " " isn't numeric in numeric eq (==) at /usr/share/koha/C4/Koha.pm line 600.
[2024/01/18 11:52:40] [WARN] Argument " " isn't numeric in numeric eq (==) at /usr/share/koha/C4/Koha.pm line 659.
Note: According to the code in MARC::Field the indicator returned cannot be undef. So we do not return new
uninitialized warnings.
Test plan:
Check your log before and after patch.
Possibly you may need to create a record with spaces as field indicators.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sat, 13 Jan 2024 18:15:03 +0000 (18:15 +0000)]
Bug 33464: Add page-section to "Orders by fund" result list
This updates the results table for the "Orders by fund"
report with the common white background.
To test:
* Go to Reports > Orders by fund
* Search for orders (you might have to add one)
* Verify the results table is missing the common
white background
* Appyl patch
* Reload page and verify styling is improved
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sat, 13 Jan 2024 17:54:32 +0000 (17:54 +0000)]
Bug 34298: Add page-section to duplicated orders list
When creating an order from an existing order (copy),
on the third page, the page section was missing on the
table.
To test:
* Create a basket with an order, close the basket.
* Create a second basked
* Create a new order line using:
"From existing orders (copy)"
* Search for your previous order and select it for copy - Next
* Select a fund - Duplicate orders
* Verify that the table with the order lines to create
doesn't have the white background
* Apply patch
* Reload page - the table now should appear styled correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sat, 13 Jan 2024 15:58:17 +0000 (15:58 +0000)]
Bug 34872: Add page-section to cart pop-up in staff interface
This adds the page-section class to the tables in the cart pop-up
in the staff interface.
To test:
* Search for records in the staff interface and add some to the cart
* Open the cart, review the normal and brief view
* Apply patch
* Review normal and brief view again - tables/sections should now
have the white background.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 16 Nov 2023 13:51:44 +0000 (13:51 +0000)]
Bug 35350: Update label creator pop-up windows with consistent footer markup
This patch updates two label creator templates in order to style
submission and close buttons in a fixed footer at the bottom of the
window, with markup consistent with other pop-up windows.
To test, apply the patch and go to Cataloging -> Label creator.
- Click New -> Label batch.
- Click the "Add items" button under the form.
- A "Search for items" window should pop up.
- The window's fixed footer should have the "Search" and "Close
window" buttons. Test that each work correctly.
- Submit a search which will return results.
- The search results window should also have a fixed footer. I moved
the "Add checked" and "Done" buttons out of a floating toolbar and
put the controls there for consistency's sake.
- Confirm that both controls work correctly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 16 Nov 2023 12:13:06 +0000 (12:13 +0000)]
Bug 35349: Reindent label item search template
This patch reindents the label item search template so that it has
consistent indentation. These changes should have no visible effect on
the page.
To test, apply the patch and go to Cataloging -> Label creator.
- Click New -> Label batch.
- Click the "Add items" button under the form.
- A "Search for items" window should pop up.
- The form should look correct, and work as it did before the patch.
Viewing the diff while ignoring whitespace changes should show only
places where a line break was added.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log