Marcel de Rooy [Thu, 13 Oct 2016 08:49:17 +0000 (10:49 +0200)]
Bug 8835: New db rev for issn_idx
This db rev reapplies dbrev 3.15.00.049 in case that one failed due to
existence of issn_idx.
Test plan:
If you do not have index issn_idx, recreate it:
ALTER TABLE biblioitems ADD INDEX issn_idx (issn (255))
Run this db rev. You should see: Removed issn_idx.
Rerun the dbrev. You should see: Everything is fine.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Marcel de Rooy [Wed, 12 Oct 2016 13:29:01 +0000 (15:29 +0200)]
Bug 8835: Drop issn_idx for completeness
When dbrev 3.15.00.049 failed, the still existing issn_idx must have
been the cause.
This patch only adjusts the old db rev.
Still thinking if we also need a new db rev to fix isbn and issn for
those installs where 3.15.00.049 failed too. (In that case the fields
may not have been changed to mediumtext and no indexes were added.)
Test plan:
Ideally, run an upgrade from something older than 3.15.00.49.
But running the added sql command from the command line might convince
you too.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Jonathan Druart [Mon, 3 Oct 2016 11:27:21 +0000 (12:27 +0100)]
Bug 17278: Fix "show all items" link
Then we need to remove the "available" part from the query.
They are really awkward patches...
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 3 Oct 2016 09:45:13 +0000 (10:45 +0100)]
Bug 17278: Use available limit when requesting zebra when ccl query is used
When a ccl query is used, the buildQuery subroutine does not handle
the available limit (not an index).
This available limit is handle later in the subroutine.
This affect the author links on the detail page for instance (an=xx).
A much better solution would be to keep an 'available' zebra index up-to-date.
Test plan:
(OPAC or staff interface, it does not matter)
- Launch a search, click on a result and then on an author link to
launch another query (an:xx)
- Limit to available items without the 'facet'
=> Without this patch you won't get any results
=> With this patch applied you should get relevant result (regarding the
known bugs 16970, 13715, 13658, 5463, etc.)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Wed, 16 Nov 2016 16:05:09 +0000 (10:05 -0600)]
Bug 17609: Small typo in about.tt
Small typo whould => should
To avoid any misunderstanding you should not export the memcached config
from ENV in line 79
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
An error occurred when updateing mappings => updateing
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 09:01:19 +0000 (09:01 +0000)]
Bug 17391: Fix number of values in sysprefs.sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 08:58:55 +0000 (08:58 +0000)]
Bug 17391: Add atomic update file
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sun, 16 Oct 2016 12:20:42 +0000 (14:20 +0200)]
Bug 17391: Add missing prefs to sysprefs.sql
Adds
- ReturnpathDefault
- ReplytoDefault
to the sysprefs.sql file.
To test:
- Run the web installer in any language
- Check all preferences are installed without error
- Check prefs listed above now exsit in your
systempreferences table
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hector Castro [Mon, 14 Nov 2016 21:20:22 +0000 (15:20 -0600)]
Bug 17616: (follow-up)Select tag on elasticsearch mappings page is not closed properly
Also some close tag </selected> should be </select>
Follow previous patch to test
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Fri, 11 Nov 2016 16:48:15 +0000 (16:48 +0000)]
Bug 17616: Select tag on elasticsearch mappings page is not closed properly
Test plan
1) Have SearchEngine syspref set to Elastic
2) Look at source on admin/searchengine/elasticsearch/mappings.pl
-> without patch you'll see select with attribute
data-id="mapping_search_field_name" closing tag written badly as
"/select>"
-> with patch everything looks OK
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Tue, 9 Aug 2016 11:42:15 +0000 (14:42 +0300)]
Bug 17086: Reword borrowers to patrons in Swagger tags for holds
Routes for holds have tags called "borrowers". We should use "patrons" instead
in order not to have both (endpoints for patrons already add "patrons").
This patch changes the tags from borrowers to patrons in:
GET /holds
POST /holds
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 08:55:04 +0000 (08:55 +0000)]
Bug 17626: Remove existing install instructions and link to the wiki pages instead
Since we are pretty bad to maintain INSTALL files, I'd suggest to point
to the wiki.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 08:54:45 +0000 (08:54 +0000)]
Bug 17626: Remove INSTALL.distri files
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 15 Aug 2016 18:12:44 +0000 (18:12 +0000)]
Bug 17132 - Availability search broken when using Elastic
Elastic appears to be indexing onloan as a string, but our code assumes
it is a boolean.
Test Plan:
1) Ensure you are set up using Elastic as your search engine
2) Search only for available items from the advanced search
3) Note you get no results
4) Apply this patch
5) Re-run the search
6) You should now get results!
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Sun, 20 Nov 2016 15:35:53 +0000 (16:35 +0100)]
Bug 17663: Forgotten userpermissions from bug 14686
Bug 14686 added in a dbrev:
(13, 'upload_general_files', 'Upload any file'),
(13, 'upload_manage', 'Manage uploaded files');
But these were not added in userpermissions.sql somehow :)
So, what now?
This patch:
[1] adds them to userpermissions.sql as should have been done,
[2] adds a dbrev to add them for newer installs that did not run the
14686 dbrev.
Test plan:
[1] Run this sql statement:
DELETE FROM permissions WHERE code = 'upload_general_files' OR
code = 'upload_manage'
[2] Run the db rev.
[3] Check if you see Tools/Upload (with sufficient perms).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 18 Nov 2016 15:26:17 +0000 (15:26 +0000)]
Bug 17660: #adv is considered as an ad by adblock
So let's rename it!
Test plan:
Edit a $t in any framework, you should be able to unfold the "Advanced
constraints" part
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Mon, 10 Oct 2016 14:06:07 +0000 (17:06 +0300)]
Bug 17419: Fix smsalertnumber and mobile confusion in moremember.pl
members/moremember.pl will set mobile number as smsalertnumber in template if
smsalertnumber is not defined. This will cause incorrect display for SMS number
in patron's Details-tab. This confusion between smsalertnumber and mobile is
already fixed in Bug 14683, but members/moremember.pl was not fixed yet.
This is a minor issue since it won't occur for manually added new patrons due to
fixes already pushed in Bug 14683, but in case patron's smsalertnumber is null
in database, this bug can be replicated:
To test:
1. Set EnhancedMessagingPreferences to "Allow" and make sure SMSSendDriver
has been set.
2. Add a new patron, give it a mobile/other phone number.
3. Run a SQL query:
update koha.borrowers set smsalertnumber=NULL where borrowernumber=XXX;
(replace XXX with your new patron's borrowernumber)
4. Go to patron's details tab and observe that SMS number shows the mobile/
other phone you provided earlier.
5. Apply patch.
6. Refresh patron's details tab.
7. Observe that smsalertnumber is now empty, as it should be.
Followed test plan, works as expected. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Mon, 7 Nov 2016 22:03:33 +0000 (23:03 +0100)]
Bug 17543: Update German web installer sample files for 16.11
Updates sample files with German translations:
- Sample notices for article requests
To test:
- Make sure the German web installer installs all
sample files correctly.
- Bonus: check German translations.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested german installer/translation
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch:
- Authorised value HSBND_FREQ
is done by bug 17576 (and correctly translated in German)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 18 Nov 2016 07:37:07 +0000 (08:37 +0100)]
Bug 17642: [QA Follow-up] Issues_stats.pl is not plack safe
Resolve:
Variable "$ccodes" is not available at reports/issues_stats.pl line 358.
Variable "$locations" is not available at reports/issues_stats.pl line 359.
Variable "$ccodes" is not available at reports/issues_stats.pl line 358.
Variable "$locations" is not available at reports/issues_stats.pl line 359.
Test plan:
Run the script. Choose Collection or Shelving Location.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 11:23:57 +0000 (11:23 +0000)]
Bug 17642: Do not explode if no authorised value exist
Can't call method "lib" on an undefined value at
/home/vagrant/kohaclone/Koha/AuthorisedValues.pm line 137.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 16:46:34 +0000 (17:46 +0100)]
Bug 17642: Add and use get_descriptions_by_koha_field
Ok I am silly, we needed to replace to use the cache mechanism for
search_by_koha_field, not find_by_koha_field...
Let's create another subroutine
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 16:29:07 +0000 (17:29 +0100)]
Bug 17642: use get_description_by_koha_field when needed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 16:23:23 +0000 (17:23 +0100)]
Bug 17642: Add get_description_by_koha_field
Most of the time we just need the descriptions (lib or
opac_description), so let's add a new method for that and cache the
descriptions in L1.
Ideally we should cache it in L2 as well, but the AV code is not robust
enough to allow that
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 15:37:16 +0000 (16:37 +0100)]
Bug 17642: use find_by_koha_field when needed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 15:08:59 +0000 (15:08 +0000)]
Bug 17642: Add find_by_koha_field
When we call search_by_koha_field with an authorised_value, we actually
expect only 1 value
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 10:49:03 +0000 (10:49 +0000)]
Bug 17642: Try to fix AV code
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Radek Šiman [Thu, 3 Nov 2016 13:45:43 +0000 (14:45 +0100)]
Bug 17559: Fixed HTML element ID of B_streetnumber
There is a duplicate ID in HTML code, because of this:
<input type="text" id="B_address" name="B_streetnumber" size="5"
value="" />
<input type="text" id="B_address" name="B_address" size="40" value="" />
Test plan:
1) Edit a patron and look into its HTML code
2) Find input: name="B_streetnumber"
3) Its ID is B_address - a duplicate within the code in fact
4) Apply the patch
5) Repeat steps 1 and 2
6) The ID is unique now: B_streetnumber
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14610 revised staff-global.css so that the "holdcount" class was
renamed "number_box." That's good. It's good to have something more
generic since the class is used in multiple places.
The problem is that there are still several instances of the "holdcount"
class in the templates which should have been updated at the same time
to say "number_box." Those instances are now unstyled.
Test Plan:
1) Apply this patch
2) Check that the holds count on catalogue/detail.pl is styled
3) Check that the patron modifications count on members/member.pl is styled
4) Check that the pending comments count on tools/tools-home.pl is styled
5) Check that the pending tags count on tools/tools-home.pl is styled
Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Tue, 8 Nov 2016 17:26:36 +0000 (17:26 +0000)]
Bug 17590 - Exporting reports as CSV with 'delimiter' SysPref set to 'tabulation' creates files with 't' as separator
To test:
Set 'delimiter' system preference to 'tabs'
Export a report as csv
Open the file in text editor and note fields separated by character 't'
Apply patch
Export report as CSV
Open file in text editor and note tabs are used to separate fields
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
tabs now, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Fri, 4 Nov 2016 13:34:12 +0000 (09:34 -0400)]
Bug 17545 [Revised] Make "Add biblio" not hidden by language chooser
This alternate patch changes the menu direction so that it "drops" up
instead of down. This avoids the problem of overlapping or being hidden
by the language chooser.
The disadvantage of this patch is that it is not global. However, I
think it's a better long-term solution to the problem.
To test, apply the patch and follow the issue description:
- Make sure more than one language is active for the staff client, so
that the language chooser bar shows at the bottom of each page
- Do one or more Z39.50 searches, to make sure you have some records in
the reservoir
- Go to "Cataloging" and do a "Catalog search", so that the reservoir is
searched. Make sure your search is broad enough that some results from
the reservoir is shown "below the fold"
- Scroll to the last result and click on the "Actions" menu
The direction of the menu should be up instead of down.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Popup menus on the cataloging search page now pop up instead
of down, which means they avoid being hidden by the language
chooser. Mission accimplished!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 27 Oct 2016 14:15:57 +0000 (14:15 +0000)]
Bug 17513: Create GRANT for user@localhost in koha-create
See the bug description for the details.
Test plan:
Use this script to create a new koha installation, using MariaDB
You should not display
"user koha_kohadev doesn't have enough privilege on database koha_kohadev "
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that this still works (with MySQL).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 18 Nov 2016 08:23:16 +0000 (08:23 +0000)]
Bug 17657: Fix locations of item types images
Koha::ItemType->image_location takes the interface in parameter or
default to OPAC.
From the item types admin page, we need to specify the intranet
interface to retrieve the correct image's url
Test plan:
Go on the item types admin page, see the source of the page and find the
image' urls.
=> Without this patch, they point to the OPAC
=> With this patch, the location is correct
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 16:08:00 +0000 (16:08 +0000)]
Bug 17654: Add tests to enforce swagger definition files integrity
The swagger definition error we found on bug 17651 should have been
caught earlier with tests.
Now we are testing for nullable columns.
QA: Have a look at the FIXME
Test plan:
Apply without 17651 (revert if already pushed)
The tests won't pass
On top of 17651 the tests will pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation* create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation*
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation*
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Acquisition/CancelReceipt.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Acquisition/CancelReceipt.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Acquisition/CancelReceipt.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Mon, 10 Nov 2014 19:23:45 +0000 (20:23 +0100)]
Bug 12359: Add HidePatronName functionality to the holds queue
This changes the Holds Queue page to not show the patron's name
and phone number, but only the cardnumber, when HidePatronName
is set to 'Don't show'
This also changes the link to the patron account to use
the borrowernumber instead of the cardnumber, which seems
more consistent.
Fixes a tiny capitalization error: Only item...
To test:
- Look at the holds queue page with holds displayed
- Toggle HidePatronName system preference and observe the change
- Make sure the link works correctly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Rebased 2016-10-16
Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 24 Aug 2016 11:13:48 +0000 (11:13 +0000)]
Bug 14736 - AllowRenewalIfOtherItemsAvailable slows circulation down in case of a record with many items and many holds
If the AllowRenewalIfOtherItemsAvailable sys pref is set to allow, and a
borrower has an item checked out that has many items {30+} AND many
holds {70+) on it, loading the checkouts table for this borrower takes
FOREVER to load. The load time takes forever, because of the
factoring that happens to determine if an item is truly
available for renewal.
This patch swaps the use of GetMemberDetails for GetMember
and reorders the subroutine calls to check each items' renewability
from fastest to slowest.
In a test case, the results of pre patch were:
Start of loop: 2016-08-24T11:05:14
End of loop: 2016-08-24T11:05:29
Resulting in 15 seconds being spent in the loop
Post patch results were:
Start of loop: 2016-08-24T11:08:43
End of loop: 2016-08-24T11:08:48
Resulting in only 5 seconds being spent in the loop!
Test Plan:
1) Apply this patch
2) Note there are no changes in functionality for the renewals column of
the patron checkouts table.
If you wish to go further and test the performance benefit:
1) Create a record with 50 items and 100 holds ( 50 waiting, 50 unfilled )
2) Check out one of the waiting holds to a patron
3) Time the amount of time it takes for the checkouts table to load
4) Apply this patch
5) Repeat step 3, you should see an improvement in load time
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 29 Sep 2016 15:08:36 +0000 (16:08 +0100)]
Bug 17377: ES - Take control fields into account
There is a bug in Koha::SearchEngine::Elasticsearc::Search->json2marc, it
assumes that the MARC::Field constructor always takes >= 5 parameters.
This assumption is wrong for control fields, to create a control field you
need to call the constructor with:
MARC::Field->new($tag, $value);
Note that I got "Too much data for control field" in the _warning value of my
MARC::Field because too many parameters were passed, and the value was undef.
That broke the result search links (on the staff interface) for DB with
biblio.biblionumber mapped with 001.
Other bugs will certainly be fixed by this patch.
For instance I got:
GetMarcBiblio called with undefined biblionumber at /home/koha/src/opac/opac-search.pl line 664.
GetCOinSBiblio called with undefined record at /home/koha/src/opac/opac-search.pl line 665.
in my logs, with this patch I don't get them anymore.
Test plan:
You can try to recreate the different issues and confirm than this patch
fixes them.
Or just run the tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 29 Sep 2016 15:41:53 +0000 (16:41 +0100)]
Bug 17377: Add tests for json2marc
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Sep 2016 10:40:13 +0000 (11:40 +0100)]
Bug 17323: Column search_history.time cannot be null
When doing a search, with SearchHistory pref switched on:
DBD::mysql::st execute failed: Column 'time' cannot be null [for Statement "
INSERT INTO search_history(
userid, sessionid, query_desc, query_cgi, type, total, time
) VALUES(
?, ?, ?, ?, ?, ?, ?
)
" with ParamValues: 0="7874", 1='12338a0bd8da63e32c79ee84f8493a07', 2="kw,wrdl: d", 3='q=d', 4='biblio', 5=6104, 6=undef] at C4/Search/History.pm line 34.
Since MySLQ 5.7, undef does not mean "the default value".
To let the DBMS set the default value (CURRENT_TIMESTAMP), the parameter should not be passed
Test plan:
OPAC+Intranet, swith the 2 SearchHistory syspref on
Do a search
=> Without this patch, you will get an error in the log and the row will not be inserted in the table.
=> With this patch, everything must go fine
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Not verified with MySQL 5.7. But this looks good to me.
Works under Jessie.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 17 Nov 2016 15:12:01 +0000 (15:12 +0000)]
Bug 17651: borrowers.updated_on can be null - swagger def
The swagger file does not consider borrowers.updated_on as a nullable
value, it should
Test plan:
0/ Do not apply this patch
1/ update borrowers set updated_on=null;
2/ prove t/db_dependent/api/v1/patrons.t
=> Fail
3/ Apply this patch
4/ prove t/db_dependent/api/v1/patrons.t
=> green
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/GetIssues.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/GetIssues.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/GetIssues.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All test pass successfuly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 19 Oct 2016 13:14:41 +0000 (14:14 +0100)]
Bug 17431: Create the object we need instead of assuming something exists
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Wed, 19 Oct 2016 12:18:02 +0000 (15:18 +0300)]
Bug 17431: (follow-up) Fix issuingrules
Issuingrules could had prevented holds.t from passing with error tooManyReserves.
This patch sets issuingrules at the beginning of the test to make sure reserves
are allowed.
To test:
1. Apply patch & Run t/db_dependent/api/v1/holds.t
2. Observe test pass
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Lari Taskula [Wed, 12 Oct 2016 11:29:26 +0000 (14:29 +0300)]
Bug 17431: Fix failing test t/db_dependent/api/v1/holds.t
This patch fixed failing test for t/db_dependent/api/v1/holds.t which was broken
after Bug 14695.
$ perl t/db_dependent/api/v1/holds.t
...
not ok 42 - similar match for JSON Pointer "/error"
# Failed test 'similar match for JSON Pointer "/error"'
# at t/db_dependent/api/v1/holds.t line 291.
# 'Reserve cannot be placed. Reason: itemAlreadyOnHold'
# doesn't match '(?^u:tooManyReserves)'
# Looks like you failed 1 test of 42.
not ok 4 - Test endpoints with permission
To test:
1. Run t/db_dependent/api/v1/holds.t and observe it fail.
2. Apply patch.
3. Run the test again and observe it pass.
Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Members/IssueSlip.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Members/IssueSlip.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Members/IssueSlip.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All test pass successfuly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) prove t/db_dependent/Exporter/Record.t fails
2) Apply this patch
3) prove t/db_dependent/Exporter/Record.t succeeds!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Indeed the patron categories plugin now returns a
Koha::Patron::Categories object and does not set a 'selected' flag.
We do not need this flag (`git grep Categories.all **/*.tt` to trust me)
Note that this patch also add a patron category to make the test passes
even if no category exist.
Test plan:
prove t/db_dependent/Template/Plugin/Categories.t
should return green
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 16:07:35 +0000 (16:07 +0000)]
Bug 17633: Do not call set_preference from tests
If memcached is running, the pref's value will be set in cache, what we
do not want.
t/db_dependent/Context.t and t/db_dependent/sysprefs.t are exceptions
for obvious reasons.
Test plan:
Make sure all these tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 09:49:20 +0000 (09:49 +0000)]
Bug 17641: Fix t/Biblio/Isbd.t
On commit cadf5aea814636ccccd85fcc38aa30f751d779c0
Bug 11592: MARCView and ISBD followup
The prototype of C4::Biblio::GetISBDView has been changed to take a
hashref in parameter.
But the tests have not been updated
Test plan:
prove t/Biblio/Isbd.t
should return green
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=17637 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 16 Nov 2016 07:44:03 +0000 (07:44 +0000)]
Bug 17637: Fix tests Auth_with_ldap.t
Koha::Patron->delete create a transaction and so we need to use
txn_begin to have nested txn
DBD::mysql::db begin_work failed: Already in a transaction
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 15:49:00 +0000 (15:49 +0000)]
Bug 17599: Make the tests pass
If you run TooMany or MultiplePerRecord.t after
t/db_dependent/Circulation/Returns.t (for instance) and that you are
running memcached, item-level_itypes will be 0.
These tests assume that the pref is 1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If OpacRenewalAllowed is enabled, the following error message is
displayed:
Template process failed: undef error - The method is_expired is not
covered by tests! at /home/vagrant/kohaclone/C4/Templates.pm line 121.
The is_expired and BlockExpiredPatronOpacActions methods did not exist
for the Koha::Patron object. These 2 values were returned by
GetMemberDetails.
To fix this, we need bug 17579 which introduces the
Koha::Patron->is_expired method and also bug 17604 for the
Koha::Patron->effective_BlockExpiredPatronOpacActions.
Test Plan:
1) Check out an item for a patron
2) Enable OpacRenewalAllowed
3) Log in as that patron, go to opac-user.pl
4) Note the error
5) Apply this patch
6) Reload opac-user.pl
7) Page should now load!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 9 Nov 2016 13:23:54 +0000 (13:23 +0000)]
Bug 17579: Make sure we are testing the real life
Without this patch, the tests are not testing the same things as what
happens on the interface.
We need to refresh the object to make sure the date set into dateexpiry
is the one in DB.
Without this patch, ->is_expired test a datetime object, with this patch
it compares with a date oject
Without the changes made in Koha::Patron->is_expired, a patron which has
a dateexpiry set to today was marked as expired on the interface. This
is a change in the behavior, what this refactoring does not want to do.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 7 Nov 2016 17:12:58 +0000 (17:12 +0000)]
Bug 17579: Add the Koha::Patron->is_expired
This new method will be handy for further uses
Test plan:
prove t/db_dependent/Koha/Patrons.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 4 Nov 2016 15:05:08 +0000 (15:05 +0000)]
Bug 17555: Add Koha::Patron->category
We need to use the DBIx::Class relationship to retrieve the patron
category.
It is more convenient to have a Koha::Patron->category method to
retrieve the category of a given patron.
Test plan:
Make sure that the tests in t/db_dependent/Koha/Patron* return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Wed, 14 Sep 2016 19:14:02 +0000 (15:14 -0400)]
Bug 15690: Hardcoded 16 is uncool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Followed test plan in comment #7, works as expectd. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 13 Sep 2016 14:43:50 +0000 (15:43 +0100)]
Bug 15690: CardnumberLength should not be bigger than 16
borrowers.cardnumber is a varchar(16), so CardnumberLength should not
have a max > 16
Test plan:
Test different value in CardnumberLength ("20", "20,30", "40,")
Edit a patron a make sure the text display under the cardnumber input is
correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the patron swagger definition match the DB schema.
To test:
- Run:
$ prove t/db_dependent/api/v1/swagger/definitions.t
=> FAIL: 'lastseen' field is not declared in the swagger definition
- Apply the patch
- Run:
$ prove t/db_dependent/api/v1/swagger/definitions.t
=> SUCCESS: Tests pass!
- Sigh off :-D
Jonathan Druart [Tue, 8 Nov 2016 14:43:46 +0000 (14:43 +0000)]
Bug 17582: Fix authority framework edition
Step to recreate:
Admin>Authority types > Actions > Marc structure
Test plan
Confirm that this patch fixes the issue
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix the issue, no errors.
Can edit auth marc structure
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17567: Make populate_db.pl initialize ES mappings
To test:
- Have a clean install, no DB
- Run populate_db.pl:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ misc/devel/populate_db.pl
- Go to
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
=> FAIL: No mappings
- Delete the DB and create an empty one:
$ mysql -uroot
> DROP DATABASE koha_kohadev; CREATE DATABASE koha_kohadev;
> GRANT ALL PRIVILEGES ON koha_kohadev.* TO
'koha_kohadev'@'localhost';
- Run populate_db.pl:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ misc/devel/populate_db.pl
- Go to
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
=> SUCCESS: There are mappings!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Patron/Borrower_Discharge.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Patron/Borrower_Discharge.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Patron/Borrower_Discharge.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/IsItemIssued.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/IsItemIssued.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/IsItemIssued.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17575: (followup) Remove missing fine type warnings
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17575: Remove itemtype-related warnings from Circulation.t
To test:
- Run:
$ prove t/db_dependent/Circulation.t
=> FAIL: Lots of warnings
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation.t
=> SUCCESS: All green and no itemtype warnings
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17574: Remove itemtype-related warnings from LocalHoldsPriority.t
To test:
- Run:
$ prove t/db_dependent/Holds/LocalHoldsPriority.t
=> FAIL: Tests raise lots of warnings
- Apply the patch
- Run:
$ prove t/db_dependent/Holds/LocalHoldsPriority.t
=> SUCCESS: Tests pass, and no warnings!
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17573: Remove itemtype-related warnings from DecreaseLoanHighHolds.t
To test:
- Run:
$ prove t/db_dependent/DecreaseLoanHighHolds.t
=> FAIL: Lots of warnings
- Apply the patch
- Run:
$ prove t/db_dependent/DecreaseLoanHighHolds.t
=> SUCCESS: All green and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the tests use t::lib::TestBuilder instead of
hardcoding values.
Test plan:
- Run:
$ prove t/db_dependent/Circulation/issue.t
=> SUCCESS: All tests return green with and without the patch
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log