Owen Leonard [Thu, 4 Aug 2016 18:36:41 +0000 (14:36 -0400)]
Bug 17056 - Remove event attributes from various templates
This patch removes event attributes from several templates, moving event
definitions into the JavaScript instead.
To test, apply the patch and:
- View the MARC detail page for any bibliographic record. Changing the
framework selection should reload the display using the selected
framework.
- Perform the same test on the labeled MARC view. (Set the
viewLabeledMARC system preference to "Allow" if necessary).
- To test the changes to Reports you should have at least one report
group and at least one report subgroup.
- Create a new saved SQL report.
- Select a report group. Doing so should trigger the display of report
subgroups. Deselecting the report group should hide the subgroups.
- In Acquisitions -> Suggestions, create a new suggestion.
- In the 'Acquisition information' section, changing values for
copies, currency, and price should change the value in the total
field.
- In Circulation -> Upload offline circulation file:
- My patch for Bug 16602 added the required code but forgot to remove
the corresponding onclick attributes.
- Browse for an offline circulation file.
- Clicking the 'Upload file' button should work correctly.
- After uploading a file, both the 'Add to offline circulation
queue' and 'Apply directly' buttons should work to trigger their
corresponding processes (keeping Bug 16603 in mind).
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 19 May 2016 08:42:48 +0000 (09:42 +0100)]
Bug 16552: Add the ability to change the default holdings sort
This new enhancement will add the ability to change the default holdings
sort on OPAC displays to be by library, instead of item type.
This patch adds a new pref OPACHoldingsDefaultSortField with 3 different
possible values:
- Item type
- Home library
- Holding library
Note that if OpacLocationBranchToDisplay is set not to display home libraries,
unexpected behaviors might happen if OPACHoldingsDefaultSortField is set to
"Home library", same for "Holding library".
Test plan:
- Confirm that the default value for OPACHoldingsDefaultSortField is
'first column' after executing the DB entry and that there is no
change in the behavior (first column is used to sort the holdings
table on the detail page).
- Set OpacLocationBranchToDisplay to both and play with the different
values of OPACHoldingsDefaultSortField
=> Confrm that the default column used to sort the table is correctly
changed
- Set the pref SeparateHoldings on
=> Confirm that both tables (Holdings and other holdings) are sorted using
the OPACHoldingsDefaultSortField value.
Sponsored-by: University of the Arts London Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 17 May 2016 15:31:11 +0000 (16:31 +0100)]
Bug 16551: Display the name of lists to the search results at the OPAC
This new enhancement will allow to add the name of lists containing a
biblio to the search results at the OPAC.
Test plan:
0/ Regenerate the css file to get the style change:
% lessc --clean-css="--s0 --advanced --compatibility=ie7"
koha-tmpl/opac-tmpl/bootstrap/less/opac.less >
koha-tmpl/opac-tmpl/bootstrap/css/opac.css
1/ Create some lists and add items to them
2/ On the search results you should see the name of the lists which
contains the record.
Note that we could add a syspref to make this new behavior optional.
Sponsored-by: University of the Arts London Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 13 May 2016 19:57:33 +0000 (20:57 +0100)]
Bug 16519: Replace 'our' with 'my' in [opac-]addbybiblionumbers.pl
To avoid bug like bug 16518 and to ease the readability/maintainability
of these scripts, this patch replaces the use of 'our' with 'my' to
avoid the use of global variables.
Basically the code has been moved from subroutines to the appropriate places.
Test plan:
At the intranet and OPAC sides
1/ Add items to a list
2/ Add items to a list using an existing name
3/ Add items to a list you don't have right on it (by modifying the
biblionumber in the url)
4/ At the OPAC, use the opac-addbybiblionumber.pl without being logged
in to add items to a list
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 14 Jul 2016 14:40:51 +0000 (10:40 -0400)]
Bug 15975 - Add Owning Library Column to Checkouts
To test:
1 - Checkout some items to a patron
2 - Note there is no 'Home library' column
3 - Apply patch
4 - Note there IS an 'Home library' column
5 - Use the columns configuration and ensure you can hide/display column at
will
Sponsored by: Coeur d'Alene Public Library (http://www.cdalibrary.org/)
Works as expected (after clearing browser cache).
Commit message amended (as of comment #7) Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14668: (follow-up) JSON fails if single quotes are used
Change single quotes to double quotes also add brackets to serial
enumeration.
To test follow previous test plan for intranet.
Fix double semicolon
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Charles Farmer [Fri, 15 Jul 2016 18:18:29 +0000 (14:18 -0400)]
Bug 14668: Show serial enumeration in INTRANET circulation.tt and OPAC patron's relatives' checkouts
TEST PLAN
1. THE CHECKOUT TAB, INTRANET
1.1. Add a value to the 'h' subfield of an item. ie: 'volume #42'
1.2. Check out the item to a patron
1.3. Display this patron's issues in his checkout page
1.3.1. The enumchron should be concatenated with the title
2. A PATRON'S RELATIVE, INTRANET + OPAC
1.1. Add somebody to a patron's guarantee list
1.2. Checkout a serial to this guarantee
1.3. Visit the guarantor's OPAC and INTRANET checkout page
1.3.1. You should see the enumchron in his guarantee's issues
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 2 Sep 2015 10:50:04 +0000 (11:50 +0100)]
Bug 14435: Add the ability to store result's report
At one time it was possible to store the results of a report into the
saved_reports table.
This allowed the librarians to compare different results, from the Koha
interface.
This patch is a proof of concept and is not very polished (understood:
it cannot be pushed like that).
Test plan:
Execute the runreport.pl cronjob script with the new --store-results
option.
This will serialize into json the results and put it into the
saved_reports table.
On the "Saved report" list, the "Saved results" column is now populated
with a date (note that you can have several date for a given report).
If you click on this link, the data will be displayed in a simple table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andreas Roussos [Tue, 13 Sep 2016 14:41:16 +0000 (17:41 +0300)]
Bug 9896 - Show vendor in subscription search when creating an order for a subscription
In the staff client, when creating an order from a subscription
the vendor name should be shown in a separate column.
This patch adds that feature. The 'Vendor' column is added before
the 'Library' column since they appear in that order in Advanced
search.
Test plan:
0) [PREREQUISITES] In the Staff client, under Acquisitions, create
a Vendor and associated Basket if you don't already have them.
Then, under Serials, add a new Subscription using the Vendor
you've just created.
1) Go to Acquisitions, and under 'Manage orders' search for a vendor,
then click on 'Add to basket' and select 'From a subscription'.
2) Click 'Search' on the left hand side to search for all subscriptions.
Notice how there is no 'Vendor' column in the results table.
3) Apply the patch.
4) Repeat step 2. Confirm that the patch works, i.e. there is now
a 'Vendor' column which displays the vendor name.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 21 Sep 2016 23:09:55 +0000 (23:09 +0000)]
Bug 17331 - Show holding branch in holds awaiting pickup report
This patch adds a holdingbranch column to waitingreseves.tt and
separates 'Location' into Home branch and callnumber columns
To test:
1 - Have some holds waiting and holds over
2 - View the report before the patch
3 - Note that location contains homebranch and call number
4 - View the report after the patch
5 - Note the new columns
6 - Ensure data is correct and no info has been lost
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed 2 capitalization issues.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17304: Introduce C4::Matcher::_get_match_keys unit tests
This function is used in several places, but it's behaviour is not covered by tests, thus trying to patch it can be problematic without introducing regressions.
This patch introduces unit tests for it, in the t/Matcher.t file.
To test:
- Apply the patch
- Run:
$ prove t/Matcher.t
=> SUCCESS: Tests pass
- Sign off :-D
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17302: [Follow-up] Make Normalize.pm undef-resistent
Trivial changes for passing undef to the norm routines.
Added a few dumb tests too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17302: Add Koha::Util::Normalize for normalization functions
This patch introduces Koha::Util::Normalize, which includes the following normalization routines
that need no explanation:
- remove_spaces
- upper_case
- lower_case
and it also includes:
- legacy_default: which basically does what C4::Matcher::_normalize does.
All routines functionality are fully tested with the included in the included tests.
To test:
- Apply the patch
- Run:
$ prove t/Koha/Util/Normalize.t
=> SUCCESS: All tests pass
- Sign off :-D
Edit: Added Exporter to explicitly export the routines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 14 Sep 2016 10:07:58 +0000 (11:07 +0100)]
Bug 14707: Update existing installations and correct wrong values
See http://hea.koha-community.org/, the countries are filled is wrong
values.
If we decide to update the free text with a dropdown list, we need to
handle these wrong data.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian FIOL [Tue, 18 Aug 2015 15:16:53 +0000 (17:16 +0200)]
Bug 14707 : Replace UsageStatsCountry syspref from free text to a dropdown list.
This will avoid syntax problems with Hea when a user will fill this 2 sysprefs
The default choice for UsageStatsLibraryType and UsageStatsCountry is 'empty'
Test Plan
---------
1. Create a new Koha install
2. Go to the 'Administration' page
3. Go to 'Global system preferences'
4. Go to 'Administration'
5. At the end of this page you should see a dropdown menu for
- UsageStatsCountry with all countries
- UsageStatsLibraryType with all type of library
They both should be empty by default.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a complete list but is a start
Lots of new strings to translate :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13405 - System information has misleading information about indexing mode
With this patch when <zebra_bib_index_mode> or <zebra_auth_index_mode> are set to 'grs1'
it appears a link to https://wiki.koha-community.org/wiki/Switching_to_dom_indexing
instead of a misleading information.
To test:
a)Insert 'grs1' in <zebra_bib_index_mode> or <zebra_auth_index_mode> (file koha-conf.xml)
b)It appers a misleading warning
c)Apply the patch
d)It appears a link to https://wiki.koha-community.org/wiki/Switching_to_dom_indexing.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This doesn't result in any breakage; just a couple of 'Edit' links that
do not pass the guarantorid in the URL, and one case where guarantor
information is not shown in the staff client.
This patch fixes that.
Test plan:
0) [PREREQUISITE] Create a patron with a guarantor if you don't have one.
1) Go to Home > Patrons and search for a patron that has a guarantor. In
the Details page for that patron, the 'Edit' link in the toolbar does
not pass the guarantor's id in the URL (...&guarantorid=&...).
2) In the same page, the 'Edit' link under the patrons name (immediately
under 'Guarantor') again does not include the guarantor id in the URL.
3) Go to Home > Patrons and click on 'New patron'. Pick any category from
the drop down menu. Enter the Surname, First name, and Date of birth
of the patron you used in step 1). This triggers the 'Duplicate patron
record?' warning -- click on 'View existing record' and notice how the
guarantor information is missing.
4) Apply the patch.
5) Repeat steps 1), 2), and 3) above. The URLs are fixed and patron info
is showing.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andreas Roussos [Sat, 10 Sep 2016 08:54:06 +0000 (11:54 +0300)]
Bug 17289: Holds awaiting pickup shows date unformatted
In the Staff client, under Circulation -> Circulation reports,
the date shown in the heading of the 'Holds awaiting pickup'
report is not formatted according to the 'dateformat' system
preference.
This (trivial) patch fixes that.
Test plan:
1) In the Staff client, go to Circulation and under 'Circulation
reports' click on 'Holds awaiting pickup'
(cgi-bin/koha/circ/waitingreserves.pl).
2) Observe that the date shown in the heading is always formatted as
yyyy-mm-dd regardless of the value of the 'dateformat' syspref.
3) Apply the patch.
4) Re-visit the 'Holds awaiting pickup' report. Confirm that the patch
worked, i.e. the date shown in the heading is formatted according
to the 'dateformat' system preference.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17245: Untranslatable abbreviated names of seasons.
Because seasons strings are not available through DateTime module,
names of them where added in code, and templates. Bug 16289 adds new
abbreviated form to the code, but not to the templates. This patch
should fix the problem.
To test:
1. Apply patch.
2. Run "misc/translator/translate update" for you language.
3. Check if names are in po/ file for language.
4. Check if generating next issue for serial and prediction patterns
works correct.
NOTE: or "create {language code}" instead of update.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 20 Sep 2016 14:11:22 +0000 (16:11 +0200)]
Bug 17322 - Translation breaks opac-ics.tt
This patch adds newlines to opac-ics.tt that are preserved by the translating process.
To test:
- Apply patch
- Create a translation (perl translate xy-XY)
- With a text editor or poedit, translate misc/translator/po/xy-XY-opac-bootstrap.po
(it is enough to translate "%s %s %s %s is overdue %sYour copy of........")
- Install language xx-XY and select it for OPAC (perl translate install xy-XY)
- Make sure you have at least a couple of loans, including one overdue
- Go to /cgi-bin/koha/opac-user.pl and click on the link labeled "Download as
iCal/.ics file"
- Inspect the file in a text editor and/or view the result in a calendar
appplication. Make sure the data makes sense. Compare it to the english version.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andreas Roussos [Thu, 15 Sep 2016 08:37:19 +0000 (11:37 +0300)]
Bug 10768 - Improve the interface related to itemBarcodeFallbackSearch
When the itemBarcodeFallbackSearch syspref is on, the wording in the
interface should reflect that you can enter a barcode OR a keyword.
Additionally, in the results of a keyword search the "Fast cataloging"
link should be more descriptive. This patch fixes these issues.
Test plan:
0) [PREREQUISITES] Ensure you have a Fast Add ('FA') framework defined,
and that your itemBarcodeFallbackSearch syspref is set to 'Enable'.
1) Go to Circulation -> Check out, search for a patron, then select a
patron to Check out. Notice how the text above the textbox reads
"Enter item barcode:".
2) Type something generic (not a barcode) in the textbox so that you'll
get at least one item as a result. Notice how the text in the yellow
warning box reads "The barcode was not found: <terms> Fast cataloging".
3) Apply the patch.
4) Repeat step 1), now the text above the textbox should read
"Enter item barcode or keyword:".
5) Repeat step 2), now the text in the yellow warning box should read
"The barcode was not found: <terms> Add record using fast cataloging".
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 13 Sep 2016 13:41:51 +0000 (14:41 +0100)]
Bug 16816: Do not copy parameters used when duplicating a report
If a report is duplicated from the report list, the new report will
contain the tag (<<YEAR>> for instance), but from the reports results
page it copies the values used for the results.
Test plan:
Create a new sql report with tags
Duplicate it from the report list: no expected changes
Run it and duplicate it: the tags must not have been replaced
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Ran and duplicated a report, the tags remained intact.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 19 Sep 2016 16:38:43 +0000 (12:38 -0400)]
Bug 17307: Smaller counter-patch
Given that the issue is trying to call a method on something that isn't
an object, because the category code doesn't exist, then why is it
even trying to change the expiry date? A simple postfix if fixes it.
Applied counter-patch by M. Tompsett. All three patron 'Edit' links
mentioned in previous patch's test plan work fine.
Signed-off-by: Andreas Roussos <arouss1980@gmail.com> Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 14 Sep 2016 13:41:20 +0000 (14:41 +0100)]
Bug 17300: Fix serials search
Since bug 16157, the location value is always "All" and the serial
search won't return anything.
Test plan:
Search for some serials.
Without this patch, it won't return any results
With this patch applied, the result search should be consistent
Reproduced with serial's "Advanced search" and search filter in
left hand column. Fixed by this patch. Signed-off-by: Marc <veron@veron.ch>
Advanced search works fine again. Signed-off-by: Andreas Roussos <arouss1980@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 14 Sep 2016 12:39:34 +0000 (13:39 +0100)]
Bug 17296: Display warning if AnonymousPatron is not correctly set
Bug 14655 added a warning to the about page ("System information" tab)
if the AnonymousPatron feature is not correctly configured.
But actually there is one case when it's not displayed.
Test plan:
Set AnonymousPatron to a non existing patron
Set at least 1 borrowers.privacy == 2
go on the about page.
Without this patch you do not get the warning
With this patch you will see "Some patrons have requested a privacy on
returning item but the AnonymousPatron pref is not set correctly. Set it
to a valid borrower number if you want that this feature works
correctly."
Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 13 Sep 2016 08:44:41 +0000 (09:44 +0100)]
Bug 17294: Make reserves_stats.pl plack safe
Lot of errors are raised by this script under plack because of var scope
issues:
Variable "$ccodes" is not available at
/home/koha/src/reports/reserves_stats.pl line 337.
Variable "$locations" is not available at
/home/koha/src/reports/reserves_stats.pl line 338.
Variable "$itemtypes" is not available at
/home/koha/src/reports/reserves_stats.pl line 339.
Variable "$Bsort1" is not available at
/home/koha/src/reports/reserves_stats.pl line 344.
Variable "$Bsort2" is not available at
/home/koha/src/reports/reserves_stats.pl line 350.
Variable "@patron_categories" is not available at
/home/koha/src/reports/reserves_stats.pl line 356.
The lazy way to fix that is that reinit them from the subroutines they
are used.
Test plan:
Execute the report, after this patch applied you won't see the error in
the log.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 29 Aug 2016 10:54:30 +0000 (10:54 +0000)]
Bug 17213 - Add HTML5 validation to cardnumber field on patron self registration
To test:
Verify that different values in 'CardnumberLength' system preference
display correctly in the self reigstration form
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 29 Aug 2016 10:28:25 +0000 (10:28 +0000)]
Bug 17213 - Self registration cardnumber is not editable if errors found when form submitted
To test:
Enable self registration
Make sure cardnumber is not in
'PatronSelfRegistrationBorrowerUnwantedField'
Enter an invalid or used cardnumber
Submit form
Note errors appears correctly but cardnumber is not editable
Apply Patch
Enter an invalid or used cardnumber
Submit form
Note errors appears correctly and cardnumber is editable
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Thu, 18 Aug 2016 12:14:47 +0000 (14:14 +0200)]
Bug 17144: Fix variable scope issues in edi_account.pl
To reproduce:
- In Staff client, go to Administration > EDI accounts
- Click "+ New account"
Result: Internal Server Error
Plack error log says:
Can't call method "param" on an undefined value at /home/marc/koha/admin/edi_accounts.pl line 157
To test:
-Apply patch
- Add an EDI account
- Edit an EDI account
- Delete an EDI account
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Tue, 9 Aug 2016 10:58:47 +0000 (12:58 +0200)]
Bug 17085 - Specify libmojolicious-perl min version
Set min version for libmojolicious-perl to 6.0 and regenerate debian/control
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Sep 2016 09:03:42 +0000 (10:03 +0100)]
Bug 17316: Do not display the list's name if the user does not have permission - Staff
Same as previous patch but for the staff interface
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Sep 2016 08:55:25 +0000 (09:55 +0100)]
Bug 17316: Do not display the list's name if the user does not have permission - OPAC
At the OPAC, if a user manipulate the URL to show a list (s)he is not
allowed to view, the list's name will be displayed anyway.
Test plan:
- Create a private list with user A
- Copy the op=view URL and access it with user B logged in
=> Without this patch, you will see the rss icon, the list's name and
the "add list" button
=> Without this patch, only the "unauthorized" box will be displayed
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Sep 2016 10:06:23 +0000 (11:06 +0100)]
Bug 17315: (Bug 17210 follow-up) Fix "Save to lists" links from the result page
On bug 17210, the selector .addtoshelf should not have caught the
.addtoshelf nodes from the result list.
To fix this, we just need to make the selector more specific (and cannot
reuse it without more changes, the biblionumber variable is not the same
- vs SEARCH_RESULT.biblionumber).
Test plan:
Make sure the 2 links (from detail and search result) "Save to lists"
and "Save to your lists" work as expected.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 2 Aug 2016 15:05:09 +0000 (16:05 +0100)]
Bug 16800: Fix XSS in catalogue/*detail.tt - isbn
Test plan:
catalogue a bibliographic record with a isbn=
</title><script>alert('XSS')</script>
Go on the detail pages.
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 2 Aug 2016 15:03:37 +0000 (16:03 +0100)]
Bug 16800: Fix XSS in catalogue/*detail.tt - author
Test plan:
catalogue a bibliographic record with a author=
</title><script>alert('XSS')</script>
Go on the detail pages.
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andreas Roussos [Fri, 16 Sep 2016 18:01:58 +0000 (21:01 +0300)]
Bug 17308 - 'New patron attribute type' button does not work
In the Staff client, the 'New patron attribute type' button in the Patron
attribute types page does not work. This patch fixes that.
Test plan:
1) In the Staff client, go to Home > Administration > Patron attribute types,
and click on the 'New patron attribute type' button. You cannot create a
new patron attribute type and you get the following Software error:
Not a HASH reference at [...]
2) Apply the patch.
3) Repeat step 1). The 'New patron attribute type' button now works.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17336: Add api_secret_passphrase entry in packages setup
Bug 13799 introduced the api_secret_passphrase on source installs, but missed to do so on packages.
This patch introduces the entry on the template koha-conf-site.xml.in file, and
patches koha-create so it generates a randomized string (64 chars) to put in it.
To test:
- Apply the patch
- Grab the new template file:
$ sudo cp kohaclone/debian/templates/koha-conf-site.xml.in \
/etc/koha
- Create a new instance:
$ kohaclone/debian/scripts/koha-create --create-db blah
=> SUCCESS: The script runs fine, /etc/koha/sites/blah/koha-conf.xml
contains the api_secret_passphrase entry.
- Sign off :-D
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17332: Remove memcached config from apache files
This patch removes Memcached configurations from the shipped apache files.
Note: testing is not actually needed for this patch, as it is really trivial. But I
include testing steps, just in case QA members require it.
To test:
- Apply the patch
- Do a (standard/dev/single) Koah install
=> SUCCESS: Verify the resulting koha-httpd.conf file doens't include memcached data
- Have a packages install
- Replace
* /etc/koha/apache-site-https.conf.in
* /etc/koha/apache-site.conf.in
with the ones from this patch
- Create an instance
=> SUCCESS: The apache configuration doesn't include memcached configurations
- Sign off :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17332: Include memcached configuration in koha-conf files
This patch introduces the memcached_servers and memcached_namespace
configuration entries as expected by 11921.
Note: better test this one and the followup together to ease the process.
To test:
- Do a source Koha install (dev, standard, single)
=> SUCCESS: The resulting koha-conf.xml file includes the memcached_* entries
which are filled with the right values.
- In kohadevbox (packages setup):
- Replace /etc/koha/koha-conf-site.xml.in with the one from this patch
- Create a new koha instance
=> SUCCESS: The instance's koha-conf.xml includes the relevant entries
- Sign off
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 21 Sep 2016 02:15:02 +0000 (02:15 +0000)]
Bug 17327: Item level holds no longer enforced
Reported by Katrin:
Example:
- on shelf holds allowed
- holds allowed 5
- holds on same record allowed 5
- FORCE item level holds
On a record with only one item, you can only place a record level hold
in OPAC now - which is against your circulation conditions.
Another example:
- record with 2 items
- circulation rules as above, 1 hold allowed on the record
- Item level holds: forced
I can only place record level holds in OPAC and staff. At the moment, I
am not able to place item level holds in any circumstances in my
installation.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Reserves/MultiplePerRecord.t
should fail
3) Apply the second patch
4) prove t/db_dependent/Reserves/MultiplePerRecord.t
should pass
5) Attempt to replicate one of the examples above, you should be unable to
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 21 Sep 2016 02:13:47 +0000 (02:13 +0000)]
Bug 17327: Add unit test for regression
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 2389: (followup) Add documentation and fix use case
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Barton Chittenden <barton@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the --test option switch to the overdue_notices.pl script
so it can be ran without doing any actual action.
To test:
- Have a patron with overdue items (simulate a checkout for a past date. Note it implies
that the circ rules are defined so the patron is overdue)
- Run:
$ sudo koha-shell kohadev
koha-dev$ misc/cronjobs/overdue_notices.pl --test
=> SUCCESS: The script is ran but the patron isn't debarred and no notice messages are queued.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Barton Chittenden <barton@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should at least report some grand totals when fixing fine records.
This patch also includes some cosmetic whitespace swapping.
Turned one last into an if statement.
Added a copyright statement too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17135: [QA Follow-up] Change location of new script to fix fines
The location of the script in misc/maintenance would be fine for
running it from the command line. But it will be a problem for several
install types when running it from the web installer.
Files from misc/maintenance go to bin/maintenance in a package install,
not to mention other installs than a dev install.
This patch moves the script to installer/data/mysql. Already there are two
other scripts run by upgradedatabase. I would rather move these three
scripts somewhere else, but we c/should do that on another report.
Fixed a small typo in a message too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Wed, 31 Aug 2016 17:46:00 +0000 (19:46 +0200)]
Bug 17135 - Maintenance script execution added as part of an atomic DB upgrade
(plus warnings for 16.05+ production setups possibly already affected)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Wed, 31 Aug 2016 14:18:50 +0000 (16:18 +0200)]
Bug 17135 - Some minor changes & fixes in the script
- all non-fatal output redirected to STDOUT (as there is an intention
to run this script from updatedatabase.pl)
- added borrowernumber and itemnumber equality checks to the SELECT
statement in getFinesForChecking() - accountlines.issue_id alone is not
entirely trustworthy (because InnoDB forgets it's highest auto_increment
after server restart), in some rare cases it may point to some random
issue for different patron and different item
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Mon, 29 Aug 2016 10:51:21 +0000 (12:51 +0200)]
Bug 17135 - Fine for the previous overdue may get overwritten by the next one
External maintenace script for fixing unclosed (FU), non accruing fine
records which may still need FU -> F correction post-Bug 15675.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 15 Jun 2016 14:51:34 +0000 (10:51 -0400)]
Bug 16752 [Revised] Remove the use of event attributes from some acquisitions templates - Uncertain prices
This patch modifies the acquisitions uncertain prices template to remove
event attributes onclick and onchange.
Also changed on the uncertain prices page: Added a label to the orders
filter, removed redundant form submit function.
- Locate a vendor which has orders with uncertain prices
- Click the 'Uncertain prices' tab in the left-hand sidebar
- Enter invalid data in the "price" field for any order. Confirm that an
error is triggered when the field loses focus.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
QA Revision: Corrected input type of submit button.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 15 Jun 2016 14:23:41 +0000 (10:23 -0400)]
Bug 16752 - Remove the use of event attributes from some acquisitions templates - Transfer order
This patch removes the use of 'onclick' from the acquisitions transfer
order process. The patch also modifies the style of some links and
buttons to conform with current guidelines.
- Locate an open basket with items in it
- Click the 'Transfer' link for a title in the basket
- In the pop-up window:
- Confirm that the 'Cancel' button at the bottom of the window is a
Bootstrap-style button.
- Search for a vendor; Confirm that the 'Choose' link is a
Bootstrap-style button.
- Choose a vendor; Confirm that the 'Choose' link on the following
page is a Bootstrap-style button.
- Confirm that clicking the 'Choose' button transfers the item to the
correct basket.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 15 Jun 2016 16:14:12 +0000 (12:14 -0400)]
Bug 16752 - Remove the use of event attributes from some acquisitions templates - Funds
This patch modifies the funds administration page and other files
related to the process of searching for and selecting fund owners and
users in order to remove the use of event attributes like 'onclick.'
Also changed in this patch: I have revised the way the "select owner"
and "select user" controls look. They are now links with Font Awesome
icons.
- Go to Administration -> Funds and open a fund for editing.
- Test the process of adding and updating an owner:
- Click the 'Select owner' link.
- Search for and select an owner in the pop-up window.
- Save the fund and verify that the owner was saved correctly.
- Perform the same test with the 'Remove owner' link.
- Use the same process to test the addition and removal of users.
- Confirm that the 'Remove' link works correctly before and after
submitting the form to save changes to the fund.
This patch changes a file which is used by both the funds template and
the template used when setting a guarantor on a patron. To test the
changes in that context:
- Open a 'child' type patron record.
- Under 'Guarantor information,' test the process of setting and
removing a guarantor to confirm that data is saved correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 10 Aug 2016 20:16:10 +0000 (22:16 +0200)]
Bug 13134: Fix template file to make category appear
This is a followup to rescue the bug.
To test: Follow test plan from comment #1
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 14 Oct 2011 14:37:56 +0000 (10:37 -0400)]
Bug 13134 - Add patron category to returns confirmation dialogs
Some librarians find it useful to know what category a patron is before
confirming a reserve or transfer from the checkin screen.
This patch adds the patron category to the hold and transfer popups
to the patron information already displayed. The li tags that contain
the patron category have the class "patron-category" to allow this data
to be easily hidden.
Test Plan:
1) Apply this patch
2) Trap a hold for a patron, note the patron category is now displayed
3) Trap a hold for pickup at another loation, note the patron category
is now displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Magnus Enger [Thu, 8 Sep 2016 13:10:33 +0000 (15:10 +0200)]
Bug 17266 - Update man page for koha-remove with -p
Bug 9754 added the -p|--purge-all option to koha-remove, but this
was not documented in the man page. This patch fixes that.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-remove.xml
$ man -l koha-remove.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 23 Jul 2014 16:43:54 +0000 (12:43 -0400)]
Bug 12629 - Software error when trying to merge records from different frameworks
Test Plan:
1) Choose a bib record that has the default framework.
2) Add a second record using that fast add framework.
3) Merge the records; switch to "Using framework: Default", and choose the original record (i.e. the one that had the default framework) as the merge reference. Clicking 'Next' will trigger the error.
4) Apply this patch
5) Repeat steps 1 - 3, no error should occur
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16556 - KohaToMarcMapped columns sharing same field with biblio(item)number are removed.
REPLICATE ISSUE:
1. Map biblio.frameworkcode to 999$b
2. Map biblio.biblionumber to 999$c
3. Add a record with something in 999$b
4. 999$b is removed by C4::Biblio::AddBiblio()
After this patch, the field used by biblio.biblionumber or biblioitems.biblioitemnumber
is not removed and created anew, thus dropping all existing additions.
There is no point in dropping the field in any case, since we can just replace
the existing subfields in-place with no need to recreate the whole field.
UNIT TESTS INCLUDED
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 9 Aug 2016 16:56:46 +0000 (12:56 -0400)]
Bug 17010 [Follow-up] Canceling a hold awaiting pickup no longer alerts librarian about next hold
This patch makes a minor change to the markup to make the button in the
confirmation dialog conform to the appearance of similar buttons.
To test, follow the original test plan for this bug and verify that the
"OK" button in the dialog looks correct.
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 1 Aug 2016 14:17:04 +0000 (07:17 -0700)]
Bug 17010 - Canceling a hold awaiting pickup no longer alerts librarian about next hold
In previous versions of Koha, if a hold canceled from the "Holds over" tab had other holds on it,
the librarian would be alerted with the message "This item is on hold for pick-up at your library"
and directed to check it in to fill the next hold. This no longer happens.
Test Plan:
1) Apply this patch
2) Find a hold that has been waiting too long
3) Cancel that hold via waitingreserves.pl
4) Note you get the message "This item is on hold for pick-up at your library"
5) Confirm the ok button redirects you to the correct tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 18 Aug 2016 14:52:38 +0000 (15:52 +0100)]
Bug 17146: Fix CSRF in picture-upload.pl
If an attacker can get an authenticated Koha user to visit their page
with the
url below, they can change or delete patrons' images
/tools/picture-upload.pl?op=Delete&borrowernumber=42
Test plan:
1/ Hit /tools/picture-upload.pl?op=Delete&borrowernumber=42
And confirm that you get a "Wrong CSRF token" error
2/ Go on the patron detail page with a patron's image
3/ Click on the Delete link (note the csrf_token param)
4/ The image will be deleted and you are redirected to the patron detail
page.
Regression tests:
Upload an image from the patron detail page and from the "upload patron
images" tool.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 12 Aug 2016 09:42:28 +0000 (10:42 +0100)]
Bug 17114: Fix XSS in picture-upload.pl
To reproduce:
1/ cp your_image.jpg 'test<svg onload=alert(1)>.jpg'
2/ Use the upload picture tool to upload this file
=> Without this patch, the alert is show
=> With this patch, the filename is correctly displayed and no alert
Note that the cardnumber var was not escaped neither, it's now.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch only fixes encoding of file
installer/data/mysql/it-IT/necessari/sample_numberpatterns.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: rewrite mandatory and sample data - de-DE
More changes to de-DE files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: rewrite mandatory and sample data - it-IT
More changes to it-IT files
Checked marc21 and unimarc files
unimarc_relatorterms.sql had bad encoding, others minor
errors
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: More i18n changes - en, es, nb and pl files
Mostly fixes bad values in auth files ( '' -> 0 )
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: rewrite mandatory and sample data - pl-PL
More changes to pl-PL files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: rewrite mandatory and sample data - nb-NO
More changes to nb-NO files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16554: rewrite mandatory and sample data - es-ES
More changes to es-ES files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fix web installer for
de-DE, es-ES, fr-CA, nb-NO and pl-PL
To test:
1) Apply patch
2) Try web installer for any/all listed languages.
a) de-DE, es-ES, fr-CA and pl-PL
There must be no problems for marc21 + all sample files
b) nb-NO
There must be no problems for normarc + all sample files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rewrite autorites_norme_unimarc.sql to
use only one INSERT IGNORE.
New load method complains about duplicate keys,
and both auth files are mandatory!
Also removed blank space from sample_labels.sql
Tested with unimarc_complet and all sample files.
To test
1) Apply the patch
2) Try fr-FR web installer, unimarc_complet + all sample files
There must be no errors
Don't know if fr-FR marc21 and unimarc_lecture_pub are used,
need a look from french users.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 14 Sep 2016 12:25:58 +0000 (13:25 +0100)]
Bug 17299: Display date due correctly on SCO
Unless it's an hourly loan, date due should not display the time part
(23:59).
Because of bad code in GetPendingIssues, date_due is replaced with a
DateTime object and is copied into date_due_sql.
We need to use this date_due_sql to correctly display the date due in
the sco module.
Test plan:
1/ Enable WebBasedSelfCheck syspref
2/ Check out an item to User A -- Do not use an hourly loan.
3/ Log in to Koha self check ( {OPAC URL}/cgi-bin/koha/sco/sco-main.pl).
4/ Enter User A's cardnumber.
Without this patch, checkouts are
MM/DD/YYYY 12:00 AM (Timeformat: 12 hour)
or MM/DD/YYYY 00:00 (Timeformat: 24H)
With this patch applied, only the date is displayed
Followed test plan, works as expected. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 19 Aug 2016 10:23:01 +0000 (12:23 +0200)]
Bug 16276: [QA Follow-up] Only track when pref is enabled
Do not track when the pref has not been enabled.
This patch moves the conditional update in Auth.pm to Koha::Patron.
And adds a test for the new track_login method.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sun, 24 Apr 2016 16:38:57 +0000 (17:38 +0100)]
Bug 16276: Change to GetBorrowersToExpunge to take last_seen into account
Sponsored-by: BULAC - http://www.bulac.fr/ Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small change: number of tests in t/db_dependent/Members.t
Jonathan Druart [Sun, 24 Apr 2016 16:39:13 +0000 (17:39 +0100)]
Bug 16276: Make delete_patrons.pl deal with --last_seen
This patch modify the delete_patrons.pl cronjob to deal with the
last_seen option.
To test it, you just have to use the --last_seen option and pass a valid
date (iso format)
Example:
perl misc/cronjobs/delete_patrons.pl --last_seen="1984-02-04" --confirm
will delete all the patrons who do not have been active since this date.
Sponsored-by: BULAC - http://www.bulac.fr/ Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sun, 24 Apr 2016 15:04:16 +0000 (16:04 +0100)]
Bug 16276: Update borrowers.lastseen when a patron is active
In order to add the ability to delete patrons who have been inactive for
more than a given time, we need to track down the last time they were
active.
To do that, we need a new DB column in the borrowers table (lastseen).
Note that the borrowers.lastseen column will not be initialised for existing
installations (set to NULL) so inactive existing patrons will never be
deleted.
A workaround would be to init them at the date when the new column will
be added.
Test plan:
0/ Set the new pref TrackLastPatronActivity on
1/ Log in as a patron (staff or OPAC)
2/ Check that the borrowers.lastseen field has been updated with the
current time
Sponsored-by: BULAC - http://www.bulac.fr/ Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 18 Aug 2016 15:04:38 +0000 (11:04 -0400)]
Bug 17147 [Revised] Streamline messages following batch record modification
This patch changes the display of informational messages during and
after the batch record modification process. Instead of showing a
separate dialog for each record modified, messages are now grouped into
one dialog.
To test, apply the patch and clear your browser cache if necessary. You
must have at least one MARC modification template defined.
- Go to Tools -> Batch record modification.
- Submit a list of biblionumbers which contains at least one number
which doesn't exist in your database.
- Confirm that warning and success messages are grouped instead of
showing in separate dialogs.
- Submit a list of biblionumbers using a MARC modification template
which contains no actions. Confirm that the resulting error message is
correctly formatted.
Revision formats the error messages without the unordered list, which
was giving them padding which didn't look correct inside a dialog.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Edit for QA: Removed obsolete changes to CSS.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16949: Batch record deletion says success when no records have been passed in
The reason this happens is because the page will say success when the
total number of records given equals the total number of successful
deletions. If you pass in no records, there are no successful deletions
--> 0 = 0 --> it thinks it has been successful. This patch adds a check
that validates if any checkboxes were selected before submitting the
final form.
I have removed the check for if any records were selected AFTER the form
has been submitted because it seemed unnecessary if the form can't be
submitted without selection of records anyway.
To test:
1) Go to Tools -> Batch record deletion
2) Put in a record number and click Continue
3) Deselect the record so that it doesn't actually delete and click
Delete selected records
4) Page says 'All records have been deleted successfully!'
5) Apply patch. Go back and repeat step 3
6) Form should not submit and you should receive an alert saying that no
records have been selected.
7) If you try selecting and deleting a record after this alert, it
should still work
Note: Have also changed the wording of error in Step 1 when you are
entering record numbers to delete.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Mon, 15 Aug 2016 19:58:52 +0000 (19:58 +0000)]
Bug 16732 - Add audio alerts (custom sound notifications) to web based self checkout
This patch adds the infrastructure needed to allow audio alerts, as
configured in administration, to affect the sco module
This patch allows only for the use of sounds with a full URL to be used
and does not allow for the Koha standard sounds to be accessed via the
SCO
To test:
Ensure you have the preference AudioAlerts enabled
Ensure you can hear normal sounds from the staff module
Define an audio alert such as:
Selector: .sco_entry
Sound: https://archive.org/download/Doorbell_1/doorbell.ogg
Load the SCO module
You should hear the doorbell noise (everytime you reload even!)
Test that the default sounds are not activated for the SCO, you must
sepcifically define them
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Uses a dialog box to warn of unique fields not copying, dialog was in
place for barcode generation so removed the extar modal completey
- Fixes a problem when barcode was undefined and autobarcode on
- deleted an extra space in Barcodes/hbymmincr.pm
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 24 Dec 2015 14:53:16 +0000 (14:53 +0000)]
Bug 14752 - Add multiple copies to a basket at once
This patch add an 'Add multiple copies' button on the new order page in
acquisitions. While processing the multiple copies a modal is
displayed.
To test:
1 - Add an order to an acquisitions basket
2 - Choose to add multiple items
3 - A modal shouold warn about ignoring UniqueItemFields from syspref
4 - When submitting the modal should popup until all items are processed.
5 - The modal should disappear after items are added.
6 - Items should be cloned, minus unique fields
7 - Enable autoBarcode for various formats, ensure you are warned that
barcodes will be generated, and ensure they are generated correctly
Sponsored by: Middletown Township Public Library (http://www.mtpl.org)
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sophie Meynieux [Wed, 24 Aug 2016 12:56:54 +0000 (14:56 +0200)]
Bug 10227 : Fix GetMessagingPreferences when digest is possible
This bug is a bit tricky to test, as the result is somehow random, depending on the order of rows returned by sql request. You've got to change the preferences several times to see bad results.
Enable EnhancedMessaging preferences
Set preferences for a borrower or a category.
run misc/cronjobs/advance_notices.pl and look in message_queue table the letter_code of the generated messages.
Change digest selection and do the test again several times
Without patch, for message where digest is allowed (Advance_Notice, Item_Due), for a borrower or a category with 'wants_digest' selected, GetBorrowerMessagingPreferences returns sometimes letter_code with DGST and sometimes not.
With the patch, letter_code returned is always correct depending on digest selected or not
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sophie Meynieux [Wed, 10 Aug 2016 14:06:35 +0000 (16:06 +0200)]
Bug 13914 : Fix UNION in SQL request for reserves statistics
Test plan
=========
On Reports > reservations, select all statuses as line, pickup library as column (empty) and a range of hold date. Keep the results
Run the same reports but with statuses as column and pickup library as line
You should get the same results on another display.
* Without patch, if you've got representative data, most of the time you can observe significant differences between both results
* With the patch, results are always the same (and right if you request directly your database)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log