* Show the "Upload images" button when OPACLocalCoverImages is enabled but
LocalCoverImages (i.e. local cover images on the staff client) is not
* Correct copyright and license comments in new files
* perltidy and replace tabs by four spaces
Signed-off-by: Koustubha Kale <kmkale@anantcorp.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Tue, 13 Dec 2011 19:19:29 +0000 (14:19 -0500)]
Bug 1633 - Interface revisions for the staff client
This patch revises the image viewer page to match other
biblio detail pages: a toolbar, a sidebar menu, etc.
Additional data is now pulled by imageviewer.pl in order
to provide information necessary for the proper functioning
of the toolbar and menus: item counts, hold availability,
biblio view options.
Other changes have been made to match the changes in the
OPAC interface like styling of the images and no-javascript
compatibility
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Patch failed to apply because of multiple Content-Type lines in the patch.
Corrected the same with this new patch.
Bug 1633: [SIGNED-OFF] Don't show image tab when inappropriate
This patch corrects the bug spotted by Owen Leonard where the Images tab was
showing up even for records that didn't have local cover images attached to
them. The tab is now hidden on the OPAC for records that don't have any
images. In the Intranet, an Images tab will show for staff with permission
to upload images, suggesting that they do so. For staff without that
permission, the tab is not shown.
This permission also disables returning images via the opac-image.pl and
catalogue/image.pl scripts when local cover images have been disabled.
Signed-off-by: Magnus Enger <magnus@enger.priv.no> Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Owen Leonard [Tue, 13 Dec 2011 17:22:09 +0000 (12:22 -0500)]
Bug 1633 - [SIGNED-OFF] Add ability to take book cover images from local img db
OPAC Template revisions:
- Revised OPAC imageviewer template to match structure of
other OPAC pages (with masthead search, footer, etc)
- Added link back to detail page (controlled by
BiblioDefaultView preference)
- Added link style to thumbnails on opac-detail to add a sense of
"clickability" to them
- Revised OPAC imageviewer template to allow it to function
with JavaScript turned off. Now even without JS main image
will load, thumbnails will be properly styled, and thumbnail
links will work.
- Changes to the script are only to pass missing variables
to the template
TODO: Corresponding changes for the staff client Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Magnus Enger <magnus@enger.priv.no> Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Koustubha Kale [Tue, 13 Dec 2011 13:24:23 +0000 (08:24 -0500)]
Bug 1633: [SIGNED-OFF] Display local cover images
This patch adds display of local cover images in the following places:
1. OPAC Results page
2. OPAC Details page
3. Separate image viewer page for the OPAC
4. Intranet Details page
5. Separate image viewer page for the Intranet
Display in the Details and (OPAC) Results pages is handled via Javascript
rather than via direct embedding, to better handle the situation where most
records have local cover images, but a few do not.
Local cover images do not currently display in the Intranet Results page
How to use/test :
Assign user permission to the user Tools > (upload_local_cover_images Upload
local cover images). In order to upload local images, login to the staff
client. Go to Home > Tools > Upload Cover Images. Here you can upload cover
images either singly or in bulk in the form of a zip file. If uploading
singly, click on image file, browse the image from your local disk, type in
the biblio number of the catalogue entry and press upload. If uploading in
bulk as a zip file, the zip file must contain (in addition to cover images)
one text file named either datalink.txt OR idlink.txt. This file should
have mapping of biblionumber to image file name in the zip one per line
with comma or tab as delimiters. For example:
Cover images will be resized to a large image of 800x600 and a thumbnail of
200x140. Depending on the setting of AllowMultipleCovers, it is possible to
upload multiple images for a single bibliographic record. However, even if
multiple covers are permitted, you have the option of replacing the existing
covers by checking the "Replace existing covers" option on the upload screen.
1. The patch adds a menu link in Tools from where you can upload local cover
images
2. It adds a user permission to enable access control to this menu item under
Tools
3. It adds a system preference OPACLocalCoverImages under Enhanced Content.
This needs to be turned on to show local cover images in OPAC.
Once you have uploaded local images, if you search for the biblio, the local
cover should show up in search as well as search detail pages in the OPAC, and
the details view in the Intranet.
Koustubha Kale is working on another patch which will allow us to set a cover
image source priority in system preferences, and which will then gracefully
fail over to the next source if image is not available from the first choice
source.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Magnus Enger <magnus@enger.priv.no> Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Rebased the patch because it was failing with koha-tmpl/intranet-tmpl/prog/en/css/staff-global.css due to changes pushed in master.
Applies cleanly now.
Bug 1633: [SIGNED-OFF] Add support for uploading images to Koha
A frequently-requested feature for Koha, especially by special libraries, is
the ability to upload local cover images into Koha.
This patch adds a bibliocoverimage table, and image handling code in the
C4::Images module. Key features of the implementation include:
1. The ability to have multiple cover images for a biblio
2. Handling for "full size" (800x600) and thumbnail-size (200x140) images
3. Uploading images directly from the record view
The image display functionality by Koustubha Kale of Anant Corporation will
follow in a second patch.
Special thanks to Koustubha Kale and Anant Corporation for the initial
implementation of local cover images, and to Chris Nighswonger of Foundation
Bible College for his prior work on patron images.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Will add comments on Bugzilla.
Patch failed to apply because installer/data/mysql/sysprefs.sql had changed in master.
Corrected the same with this new patch.
Garry Collum [Fri, 20 Jan 2012 17:24:27 +0000 (12:24 -0500)]
Bug 7098: Adds koha_url elements to sco.css.
The 'Powered by Koha' link was not styled in self-cko. The koha_url elements were missing from sco.css. The elements within opac.css were copied and added to sco.css.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marcel de Rooy [Thu, 5 Jan 2012 13:45:06 +0000 (14:45 +0100)]
6829 Follow up
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Needed this second follow up to remove 952-0 from the display again, coming up after the first follow up.
Changed a second test in accordance with first follow up.
Removed a useless 10th loop to create a tab10XX that is not in the template.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Frédéric Demians [Tue, 27 Dec 2011 10:01:48 +0000 (11:01 +0100)]
Bug 6829 Follow up patch
To reproduce the bug:
- Open OPAC MARC View for a specific biblio record
- Fields which are affected to tab 0 are all hidden
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes bug for 0xx fields in OPAC MARC view.
Note: the problem only exists for 0xx fields with real subfields,
control fields display correctly, fields like 040 only display
after patch was applied.
Colin Campbell [Fri, 26 Aug 2011 15:17:11 +0000 (16:17 +0100)]
Bug 6790: Remove unnecessary variable from getroutinglist return
getroutinglist returns a count variable to indicate how many elements
are in the array. This is almost always a serious code smell. (We are
programming in a list manipulating language) The routine was executing
am unnecessary loop just to maintain that var.
Removed the variable from the routine and perldoc
refactored calls of the routine removed the c-style loops for
more idiomatic and maintainable for loops
renamed some opaquely named variables
removed a call to the routine where nothing was done with the data
moved some html out of the calling script and into the template
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Chris Cormack [Wed, 4 Jan 2012 19:54:43 +0000 (08:54 +1300)]
Bug 7402 : Fixing the date formatting so links to the invoice page work
This depends on bug 929
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Uses the new TT plugin to display the date, while using iso format
to build a correct URL to the invoice page.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Srdjan Jankovic [Tue, 20 Dec 2011 01:56:51 +0000 (14:56 +1300)]
bug_5473: Update items when receiving shipments
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested by recieving multiple items with the AcqCreateItem
preference set to 'placing and order' and 'receiving an item'
In both cases the pricing and vendor is brought over to the
item record so I'm signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Julian Maurice [Wed, 10 Aug 2011 09:41:06 +0000 (11:41 +0200)]
Bug 6694: Problem with casAuthentication syspref
A missing test in checkauth caused anonymous session to be destroyed and
re-created at every call when this syspref was set.
Almost the same issue is also fixed in check_api_auth, which caused
C4::Service->init to fail.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Paul Poulain [Fri, 22 Jul 2011 08:24:26 +0000 (10:24 +0200)]
BZ6115: Acquisition reports : date filter & sorting don't work
* the filter on dates don't work
* when displaying by day or month, it was 100% alphabetic, april was before
january for example. Adding the month number before the month name to get
proper sorting
* removed many commented warn & lines
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Katrin Fischer [Fri, 30 Dec 2011 09:24:31 +0000 (10:24 +0100)]
Bug 5347: Follow up - Fix warnings, check/uncheck all and makes error message translatable
This patch fixes some minor problems found in late order management:
1) Silences 2 warns in Letters.p
After patch is applied no more warns should show up in the logs.
2) Fixes check/uncheck al
When limiting on one vendor the checkbox in the last header column
was doing nothing. I changed the checkbox to 2 links 'check all' and
'uncheck all' as it's done in other templates.
3) Email has been sent
The message was hardcoded into the lateorders.pl file and not
translatable.
I moved it to the template and changed the wording slightly.
Note: The error message 'The bookseller has no email' comes from
Letters.pm. I didn't change that, because I was not sure where it is
used. The error message as is can not be translated and should be
moved into the templates too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Fri, 2 Dec 2011 13:03:50 +0000 (14:03 +0100)]
Bug 5347: Adds columns claims_count and claimed_date in aqorders
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The Delta_Days sub is called only when a patron that is already debarred must be debarred for a longer period.
This (rare) case probably hasn't be tested during QA, because the sub is not loaded.
Loading it fixes the problem
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Before this patch : 9619 borrowers added in 31 Minutes, After : 68 seconds.
This adds Hashref to table structure in C4::SQLHelper to speed up bulk edits.
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Not sure the brackets are nessecary, but I think I remember learning
bitwise operators have a lower priority than other relational
operators so wanted to make sure we notted the result of the bitwise
and, not the flag
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 5 Jan 2012 18:17:53 +0000 (13:17 -0500)]
Bug 7097: HidePatronName not hiding on issue history
HidePatronName wasn't being respected on a titles Checkout History tab. This patch
exports the preference to the template (if set), and then toggles the display between
patron cardnumber (if 'on') or the name (if 'off')
To test:
Enable HidePatronName
Go to the Checkout History tab of an item that has been checked out before
You should see the patron's cardnumber instead of their surname, firstname
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Liz Rea [Fri, 30 Dec 2011 06:36:08 +0000 (00:36 -0600)]
Bug 7388 [SIGNED-OFF] [enh] - round the corners on the side menus in the staff client
To test:
apply patch
check menus on circulation and bib detail page - corners on the menus to the left should be rounded.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Those rounded corners do look more friendly. I have tested circulation and bib detail page and
have found no ill side effects.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Tue, 3 Jan 2012 17:00:26 +0000 (12:00 -0500)]
Bug 7399: Holds Queue should show reserve notes
The notes for a specific hold, if they existed, were being added to the tmp_holdsqueue
table by build_holds_queue.pl, but they were not displayed anywhere, which seems a waste.
This patch adds the Notes column to the far right of view_holdsqueue.pl.
To Test:
Place a hold with a note
Run build_holds_queue.pl to place it in the Holds Queue
View the Holds Queue; you should see the note on the far right of the table
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The cataloger-supplied translated title stored in MARC21 field 242 was not being
displayed when XSLT was enabled.
Test plan:
1) Enable XSLT for OPAC Details and Results, and Intranet Details.
2) Create or add a record with a 242 field
3) See that the translated title is not displayed in OPAC Details or Results, or
Intranet Details
4) Apply patch
5) See that the translated title is now displayed in OPAC Details and Results,
and Intranet Details
Signed-off-by: Duncan Tyler <duncan@duncan-SoT.wgtn.cat-it.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Magnus Enger [Tue, 27 Dec 2011 21:49:33 +0000 (22:49 +0100)]
Bug 6787 - Fast Add framework for NORMARC
The new framework will be called "Hurtigkatalogisering".
To test:
- Make sure the nb-NO translation is installed
- Run through the web installer on an empty database
- Select nb-NO as the installation language
- Select NORMARC as the marcflavour
- Include normarc_fastadd_framework in the installed data
- Check that the framework looks ok in:
-- More > Cataloguing
-- More > Administration > MARC framework
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, not problems found.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Garry Collum [Sun, 15 Jan 2012 22:00:12 +0000 (17:00 -0500)]
Bug 7277: Fixes display of subtitles in opac.
Adds comma and space to results display in opac between title and subtitles.
Also removes extra space before the subtitle in the results display of the staff pac.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Tue, 11 Oct 2011 19:56:10 +0000 (15:56 -0400)]
Fix for Bug 7006, highlight patron changes in email
This patch eliminates all unchanged fields from the email
on the assumption that the information is superfluous. I have
also added a link to the patron edit screen which will be
displayed if the staffClientBaseURL has been entered.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 15 Dec 2011 13:21:56 +0000 (08:21 -0500)]
Bug 5533 followup: reinstate Lost status editing
The original patch for 5533 removed the Lost status from the edit items screen; new items were not affected,
and batch changes could still be made, so this was not a consistent change.
This patch removes the filter that hid the Lost status dropdown, but then changes the default MARC framework
to hide this field by default (value -5). New installations will not see this status in the editor, unless
they manually activate it. This will enforce the semantics of using the "mark lost" options by default, but
provide a workaround for libraries that understand and accept the consequences of manually editing this field.
To test:
1. on an existing install, edit an item. you should have the Lost status visible
2. on a new install, editing or creating an item should not show the Lost status at all
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 5 Jan 2012 19:10:52 +0000 (14:10 -0500)]
Bug 7407: HidePatronName not working on 'on hold for' messages
HidePatronName was not working on 'on hold for' messages, only 'checked out to'
messages. This resulted in the patrons name showing if the item was on hold for
them.
T:T scope issue; needs to be within itemloo. This patch does that. Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
TransformKohaToMarc function is called for each biblio and item that has
to be build. This function execute a DB statement for each Koha field
that has to be mapped to a MARC tag/letter. This impact deeply
performances for script like rebuild_zebra, especially since items are
not anymore in bilio records and have to be rebuild on the fly.
I'm proposing a patch which read Koha field to MARC field mapping just
one time and cache it. My test show a 30% execution time improvement on
rebuild_zebra.pl script. It uses already cached mapping in C4::Context.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=6990 Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
D Ruth Bavousett [Fri, 16 Dec 2011 15:38:47 +0000 (10:38 -0500)]
Bug 7364: Possible to get to FA item add without current branch being defined.
Some paths to the FA item-add screen didn't have a branch defined--if the param is set,
use it, otherwise, use the user's logged in branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Modified for syntax by: Ian Walls <ian.walls@bywatersolutions.com> Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
syntax error at /home/paul/koha.dev/koha-community/cataloguing/additem.pl line
668, near "->param{"
Execution of /home/paul/koha.dev/koha-community/cataloguing/additem.pl aborted
due to compilation errors.
Chris Cormack [Fri, 28 Oct 2011 19:49:20 +0000 (08:49 +1300)]
Bug 6947 : opac-topissues.pl wasn't respecting item live itemtypes
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The search was only looking for bib level itypes independent
from the settings for item-level_itypes.
After patch the system preference setting is respected
and search works accordingly.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marcel de Rooy [Mon, 21 Nov 2011 11:21:11 +0000 (12:21 +0100)]
Bug 7240: Cleaning up import tables and action_logs
This patch lets cleanup_database also purge older records from the (five) import tables and the action_logs table.
Two new command line parameters are introduced: --import and --logs.
If no number of days is specified for --zebraqueue, --import or --logs, it defaults to 30 days, 60 days resp. 180 days.
I did not add a default for --sessdays, because this parameter cannot be seen separately from parameter --sessions.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds new parameters and code, does not change existing behaviour
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Tue, 27 Dec 2011 19:46:54 +0000 (14:46 -0500)]
Bug 7381 - wrong isbn showing on the staff search results
Outputting the "raw" ISBN. In the case of multiples, ISBNs
are concatenated with " | " Using a T:T filter to make these
a comma-separated list.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Added a record and confirmed that the right ISBN shows on the
search results and that the amazon cover image still works.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Admin User Koha [Wed, 14 Dec 2011 16:31:00 +0000 (17:31 +0100)]
Bug 7360 Import Default framework into other deletes default Framework
Step to reproduce :
- export default framework as SQL
- create new framework
- Import the exported SQL file into this new framework.
Go to default framework :
It disappeared.
If some libraries want to share default frameworks, then it is a major bug.
This patch fixes the test in order to cope with 0 character framework name.
Signed-off-by: François Charbonnier <francois.charbonnier@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marc Balmer [Sun, 11 Dec 2011 18:00:14 +0000 (19:00 +0100)]
Bug 7356 - Fix various typos and mis-spellings
Fix typos: the the -> the, wether -> whether, developper -> developer.
http://bugs.koha-community.org/show_bug.cgi?id=7356 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Duncan Tyler [Tue, 13 Dec 2011 03:42:17 +0000 (16:42 +1300)]
Bug 7348 - Fixed error for serial toolbar buttons in IE7
http://bugs.koha-community.org/show_bug.cgi?id=7348 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Magnus Enger [Thu, 22 Dec 2011 09:20:44 +0000 (10:20 +0100)]
Bug 7375 - Update minimum version of Perl to 5.10
- Change the installer script to look for at least 5.10/5.010000
- Change the template to ask for the correct version
To test:
- Run through the webinstaller on 5.10 or newer and check that there are
no errors.
- Ideally: Run through the webinstaller on an older version than 5.10 and
check that there *is* an error, asking for 5.10 or newer.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marcel de Rooy [Mon, 19 Dec 2011 12:25:42 +0000 (13:25 +0100)]
Bug 7367: Add space before display of languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I am a bit confused why it does not work without the
but patch fixes the display problem.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Since the original patches for bug 5226 were submitted, two new translations
have been added to Koha: es-ES and nb-NO. This patch adds the missing 545 line
to the frameworks for those languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Katrin Fischer [Mon, 6 Dec 2010 17:39:38 +0000 (18:39 +0100)]
Bug 5226: Follow up to new/awaiting_qa/bug_5226
This patch adds the field definition to
- it-IT (default and sample frameworks)
- de-DE, en, fr-FR, pl-PL (sample frameworks)
I am not sure about the database update. If we want to do that, it should perhaps update all frameworks and languages.
At the moment only en and de-DE default frameworks are updated.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds MARC21 field 545 to the English, French, German, and Polish MARC21
frameworks. The labels for the field still need to be translated into
French and Polish.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Frédéric Demians [Fri, 13 May 2011 13:24:39 +0000 (15:24 +0200)]
Bug 6098 Followup -- doesn't replace NSB/NSE by space
On any page, NSB/NSE characters are replaced by space in Output.pm. It isn't a
good thing:
- It isn't necessary since Zebra indexer handle properly those characters as
delimiter.
- It isn't necessary for display since XSL file already do that.
- It isn't efficient since a regex is done on every whole page sent by Koha,
not only on biblio record part.
- It removes an information that librarian want to keep in their biblio
records: any record edited in Koha loose its NSB/NSE characters.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Albert Oller [Wed, 30 Nov 2011 00:16:51 +0000 (19:16 -0500)]
Bug 2629 - Diacritics not being ignored when searching
/etc/zebradb/etc/word-phrase-utf.chr
added Cc miniscule and Cc circumflex; added Kk acute accent.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
- imported marc record from the bug with the offending diacritic
- reindexed
- searched for the title - result found! Yay!
projects / koha.git / log