Jonathan Druart [Tue, 8 Oct 2013 15:17:45 +0000 (17:17 +0200)]
Bug 11018: allow adding order from a reverted MARC batch
Weird behavior:
When an import is undone into catalog, the status is set to "reverted".
But if you open the add orders from iso2709, the status is automatically
set to "imported" and does not appear in the list.
So it is not possible to import a reverted batch.
[RM note: since a reverted batch is nonetheless a staged batch, and
could be reused, allowing orders to be placed by taking bibs
from a reverted batch is not as odd as it might sound. It *can* look
odd for a staged or reverted batch to contain records that are
imported, but that's a long-standing oddity.]
Test plan:
- verify you reproduce the weird behavior
- apply this patch
- import a file and the batch into the catalog
- verify (in the your mysql/MariaDB cli) the status is "imported"
- verify it does not appears in the add orders from iso2809 page
- undo the import
- verify (in the your mysql/MariaDB cli) the status is "reverted"
- verify it appears in the add orders from iso2809 page and the status
is always "reverted"
- finish the order
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9788: (follow-up) Unit tests for changed routine GetReservesFromItemnumber
Adds three tests to Reserves.t for GetReservesFromItemnumber.
We test if this routine does not return a future next available hold,
a future item level hold. And if it does return a future wait (that is:
a confirmed future hold, using ConfirmFutureHolds).
Note that Holds.t does also contains some basic tests for this routine,
but the additional tests seem to better located in the direct context of
tests for bug 9761 for ConfirmFutureHolds.
Test plan:
Run both t/db_dependent/Holds.t and t/db_dependent/Reserves.t.
Verify if both tests do not fail.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 4 Nov 2013 10:55:57 +0000 (11:55 +0100)]
Bug 9788: QA followup
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Fri, 21 Jun 2013 16:43:59 +0000 (18:43 +0200)]
Bug 9788: (follow-up) for expirationdate in Letter.pm
Pasting comment from the Bugzilla report:
Looking bit longer at this code, it is kind of strange to find it
there in the first place. Adding maxpickupdelay in Letters.pm should
not be there, but it is..
Also this date is not used normally in the default HOLD Available for
Pickup notice (that we are generating in this case). And if it would be
undef, the expiration date should imo be empty instead of today+0.
(before adding maxreservespickupdelay, you should test the allowexpire
pref first) So it is an (invisible) bug on its own.
Test plan:
See former patch. Kyle just discovered this bug, apparently by
deleting the maxpickupdelay pref..
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9788: (follow-up) removing the alldates parameter from GetReservesFromItemnumber
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 11 Mar 2013 13:28:57 +0000 (14:28 +0100)]
Bug 9788: Improvements when calling GetReservesFromItemnumber
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 16 Jan 2014 23:07:09 +0000 (23:07 +0000)]
Bug 10987: (follow-up) fix display of authorities containing only one see from or see also lnik
This patch fixes an incorrect test on the number of see from and
see also links in the authority record, as otherwise if a record
had only one 4XX or 5XX, the linked headings weren't displayed at
all. This patch also makes the test consistent across the staff
theme and the two OPAC themes.
Bug 10987: remove duplicate 'see also' and 'see from' labels from authority search results
If an authority record has more than one 4xx$a (or 5xx$a) entries the
corresponding labels 'see also' and 'used for/see from' werwe repeated.
This patch removes duplicate instances of the labels, improving
readability.
To test:
- Have authority records with more than one entry on the 4xx (or 5xx)
fields.
- Do a search, check "see also:" (or 'used for/see from') appear more
than once.
- Apply the patch
- Reload and check it looks nicer :-D
- Repeat for: staff auth search, OPAC using ccsr, OPAC using prog
- Signoff
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as decribed. No koha-qa errors
Nice view on staff and both opac
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 16 Jan 2014 22:44:25 +0000 (22:44 +0000)]
Bug 10691: (follow-up) replace HTML comments with TT contents
Comments on the usage of Template Toolkit blocks don't need
to appear in the rendered HTML, so this patch converts HTML
comments to TT comments and thereby saves a tiny amount of
bandwidth.
Bug 10691: (follow-up) restore behaviour for control field ($w)
As noted by Jared, in the presence of 4XX$w or 5XX$w the display
got broken by this refactoring. This patch restores the previous
behaviour in that front.
The OPAC themes get fixed too, and the Bootstrap one gets this
fix too.
Applied the fix that Galen proposed on comment #30 regarding
Zeno's fix in bug 11174.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10691: use authority ID in see-also links in authority search results (OPAC)
This patch changes the URL and data used to show the 'see also' links
on the OPAC's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a without linking (i.e. plain text)
- Make sure zebra is running and changes got indexed.
- In the OPAC search for the authority that is linked to the others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id in the case
of linked authorities, and to an authority search in the case of
plain text headings.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10691: use authority ID in see-also links in authority search results (staff)
This patch changes the URL and data used to show the 'see also' links
on the Staff's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a entries with plain text (i.e. no
linking)
- Make sure zebra is running and changes got indexed.
- In the staff interface search for the authority that is linked to the
others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id for linked
authorities,
and to an authority search result in the case of plain text entries.
- Check that the authority search from the cataloguing interface still
works as usual.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Francesca Moore [Tue, 14 Jan 2014 22:43:00 +0000 (11:43 +1300)]
Bug 11522: improve formating of self-registration form
1. in prog theme, enable opac self-registration and inspect clear date
with firebug; note that there are empty paragraph tags
2. add date of birth as a requirment in self-registration
3. apply patch
4. refresh page and notice that empty paragraph tags have been deleted,
so that required lines up with clear date
5. repeat the above steps for bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sophie Meynieux [Tue, 4 Dec 2012 17:05:36 +0000 (18:05 +0100)]
Bug 9210: wrap long lines in printed hold notices
This commit adds wrapping styles to print-notices.tt template
Test plan:
* place a hold on a title with a very very long title or author
* mark it as "waiting for pickup" by doing a checkin
* go to command line interface, and run
* misc/cronjobs/gather_print_notices.pl /tmp
* misc/cronjobs/printoverdues.sh /tmp
* if your title/author is long enough, it's split on 2 lines
with this patch (it is not before this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 14 Jan 2014 20:04:27 +0000 (15:04 -0500)]
Bug 11541: (follow-up) repair some warnings
Tests succeed, but cause many warnings:
prove t/Installer.t
t/Installer.t .. 1/9 "my" variable $self masks earlier declaration in
same scope at t/Installer.t line 19.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 20.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 21.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 22.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 23.
Odd number of elements in anonymous hash at t/Installer.t line 17.
Use of uninitialized value within @ARGV in anonymous hash ({}) at
t/Installer.t line 17.
The patch remedies that.
Test Plan:
1) Apply first patch on this bug
2) Run "prove t/Installer.t"
3) Note the warnings
4) Apply this patch
5) Repeat step 2
6) Note the warnings are gone
Aleisha Amohia [Tue, 14 Jan 2014 01:18:36 +0000 (14:18 +1300)]
Bug 11541: increase test coverage of Installer.pm
To test
1. Run prove t/Installer.t
2. Apply patch
3. Run prove t/Installer.t
Notice more tests are run
Signed-off-by: Francesca Moore <francescalamoore@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass :)
Emma Heath [Tue, 14 Jan 2014 01:18:47 +0000 (14:18 +1300)]
Bug 11540: increase test coverage of Charset.pm
To test
1. run prove t/Charset.t
2. apply patch
3. run prove t/Charset.t
notice more tests are run
Signed-off-by: Tom Houlker <thomas.houlker@hibs.school.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass!
Tom Houlker [Tue, 14 Jan 2014 01:24:11 +0000 (14:24 +1300)]
Bug 11539: removing 2 unused files
This patch removes C4::Barcodes::PrinterConfig, which is
used by no other code in the database.
Signed-off-by: Emma Heath <emmaheath.student@wegc.school.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No instances of PrinterConfig found in the codebase
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any reference to those files in Koha.
merllissia [Tue, 14 Jan 2014 01:18:35 +0000 (14:18 +1300)]
Bug 11545: Increasing test coverage for Languages.pm
To test
1. Run prove t/Languages.t
2. Apply patch
2. Run prove t/Languages.t again and notice: More tests are run
Signed-off-by: alex_h <dhorsman@xtra.co.nz> Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Adds another passing test. I took th liberty of moving the test plan
from the subject to the commit message. :-)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass :)
David Cook [Thu, 9 Jan 2014 06:12:26 +0000 (17:12 +1100)]
Bug 11502: make library filter in "Holds To Pull" more precise
This patch uses regex checking via the DataTables fnFilter API method
to make the branch filter more precise on the "Holds to Pull" page.
The ability to use regex is built into DataTables so this just adds
the actual expression.
_TEST PLAN_
Before applying:
1) Add library (branches) with codes of NM, NMH, and NB
2) Add items (that can be placed on hold) at all these branches
3) Place a hold on an item that is only available at NM
4) Place a hold on an item that is only available at NMH
5) Place a hold on an item that is only available at NM and NB
6) Go to "Holds to Pull" in the Circulation module
7) Filter by these three different values
8) Note that filtering by "NM" will incorrectly bring up all three
holds, while "NMH" and "NB" will only pull up one (like they should).
Apply the patch.
9) Shift+refresh the page so that your Javascript refreshes
10) Repeat step 7 (filtering by the different branch values)
11) Note that filtering by "NM" will now only bring up the hold for "NM"
and the hold for "NM" and "NB", while the others still only bring up
one hold.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
alex_h [Mon, 13 Jan 2014 22:52:04 +0000 (11:52 +1300)]
Bug 11537: Increasing test coverage for C4::Log
To test:
1. run prove t/Log.t
Notice 1 test is run
2. apply patch
3. run prove t/Log.t
Notice 3 tests are run
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think there might be a typo in "Testing git log status". Should
this read "Testing get log status"? (Noticed while looking at the
code/running perl t/Log.t.)
In any case, thanks for the patch. Looks good!
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fixed typo, thanks David
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described:
1..3
ok 1 - use C4::Log;
ok 2 - Testing GetLogStatus
ok 3 - Testing hash is non empty
Galen Charlton [Mon, 13 Jan 2014 21:51:56 +0000 (21:51 +0000)]
Bug 11535: sanitize input from patron self-registration form
This patch adds the use of C4::Scrubber to the processing of input
from the patron self-registration form, thereby closing off one
avenue for Javascript injection.
To test:
[1] Use the OPAC self-registration form to enter a new patron,
and set its address to something like:
<span style="color: red;">BAD</span>
[2] In the staff interface, bring up the new patron record. The
address will show up in red, indicating a successful HTML
injection.
[3] Apply the patch and use self-registration to enter a new
patron with a similar case of unwanted HTML coding.
[4] Bring up the second patron in the staff interface. This time,
the undesirable HTML tag should not be present.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tags are not present on testing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug and that the patch fixes it.
Passes all tests and QA script.
Ketan Kulkarni [Wed, 9 Oct 2013 14:37:27 +0000 (20:07 +0530)]
Bug 10318: Show primary email in patron search results
This patch makes the patron's primary email address be displayed (as
a mailto link) on the patron search results page.
Signed-off-by: Melissa Lefebvre <melissa@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, template only change.
Owen Leonard [Fri, 10 Jan 2014 20:46:29 +0000 (15:46 -0500)]
Bug 11505: fix untranslatable table headers in Label batch manager
The label batch manager script hard-codes the table header cell labels
in order to pass them to an HTML-building function. This obviously isn't
the best solution for internationalization, but picking the whole scheme
apart would be very complicated.
Instead this patch uses a SWITCH statement to check for each possible
case and outputs the correct translatable string for each.
To test, apply the patch and run "perl translate update" for any
translation. Check the revised po file and confirm that the new strings
are present. View the label batch edit page and confirm that the table
headings look correct: Tools -> Labels -> Manage batches -> Edit batch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests.
Similar fixes are probably needed for other pages of the labels
modules.
Owen Leonard [Fri, 10 Jan 2014 17:45:30 +0000 (12:45 -0500)]
Bug 11381: improve styling of IDreamBooks content in bootstrap theme
Styling of IDreamBooks elements is not correct in the bootstrap theme
because the relevant CSS was not transferred from the prog theme. This
patch adds it back.
To test, switch to the bootstrap theme and enable IDreamBooks system
preferences in the OPAC, particularly IDreamBooksReadometer. Find a book
in the OPAC which shows IDreamBooks review data and confirm that
everything looks correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested with "The help".
Bug 10896: Add a --verbose option to koha-translate
The -v and --verbose option switches add the --verbose switch to the
misc/translator/translate script call in the packages' 'koha-translate'
command.
The docs are updated accordingly.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as expected with and without -v. Man page looks good.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 12 Dec 2013 23:55:14 +0000 (23:55 +0000)]
Bug 11389: reenable Pg as a DB scheme that Koha can connect to
This patch restores the ability to request a DBI database handle
or a DBIx::Class schema object connected to a PostgreSQL database.
To address the concerns raised in bug 7188, only "mysql" and "Pg"
are recognized as valid DB schemes. If anything else is passed
to C4::Context::db_scheme2dbi or set as the db_scheme in the Koha
configuration file, the DBD driver to load is assumed to be "mysql".
Note that this patch drops any pretense of Oracle support.
To test:
[1] Apply patch, and verify that the database-dependent tests
pass when run against a MySQL Koha database.
[2] To test against PostgreSQL, create a Pg database and
edit koha-conf.xml to set db_scheme to Pg (and adjust
the other DB connection parameters appropriately). The
following tests should pass, at minimum:
t/Context.t
t/db_dependent/Koha_Database.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some additional notes:
- Installed Postgres following
http://wiki.ubuntuusers.de/PostgreSQL
- Created a database user koha
- Created a database koha
- Changed the koha-conf.xml file
<db_scheme>Pg</db_scheme>
<database>koha</database>
<hostname>localhost</hostname>
<port>5432</port>
<user>koha</user>
<pass>xxxx</pass>
- Installed libdbd-pg-perl
- Ran the web installer until step 3 everything looked ok
Step 3 complains:
Password for user koha: psql: fe_sendauth: no password supplied
- Both t/Context.t and t/db_dependent/Koha_Database.t pass
Bug 11509: improve usage information printed by koha-create
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
The koha-translate's usage message has a couple of inconsistencies:
'--all' should be '--available'
and '--help' is missing from the usage examples.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested using instructions on
http://wiki.koha-community.org/wiki/Testing_man_pages
Galen Charlton [Fri, 10 Jan 2014 16:49:01 +0000 (16:49 +0000)]
Bug 10952: (follow-up) clear seach history from session after saving it to DB
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Julian Maurice [Wed, 18 Dec 2013 09:58:36 +0000 (10:58 +0100)]
Bug 10952: (follow-up) comments fixes and unit tests
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Julian Maurice [Thu, 26 Sep 2013 09:22:26 +0000 (11:22 +0200)]
Bug 10952: Store anonymous search history in session
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Robin Sheat [Tue, 15 Oct 2013 02:01:31 +0000 (15:01 +1300)]
Bug 11051: remove unneccessary SQL queries in GetBranches
The way GetBranches was written, it will issue one query to get all
branches, and then one query per branch for the branch relations.
This patch pre-fetches the relations table (as we need it all anyway)
and so makes the whole process happen in two queries, rather than take
1+N, where N is the number of branches.
This might not seem like much, but when you do a search, GetBranches is
called once for each result, so 25. And you might have 10 branches. This
causes 275 database requests when you could get away with 50.
From profiling, when you run a search, this is the thing that calls
DBI::st::execute the most. Refer:
http://debian.koha-community.org/~robin/opac-search/usr-share-koha-lib-C4-Branch-pm-146-line.html#125
Test Plan:
* Have a database with branches and relationships between the branches.
(these are 'Library groups' in the UI.
* Make sure the relationships show up correctly after applying the
patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 7 Jan 2014 14:14:01 +0000 (15:14 +0100)]
Bug 11475: fix return link after editing/deleting items in batch
Bug introduced by bug 9044.
Test plan:
1- First we search for records with multiple items (books or serials,
does not matter)
2- We open this record we found with multiple items for editing
3- We chose "Edit items in batch" option from the "Edit" menu
4- We make corrections on the fields under the "Edit item" (For example
we change the collection code as "fiction")
5- We save this using "Save button" at the bottom, after we are done.
6- Just after we save, there will be a button named "Done" available
just under the page, and when we click on "Done" we encounter the Error
screen.
Before the patch, the "Done" link points to
/cgi-bin/koha/tools/CATALOGUING.
After applying the patch, the "Done" link points to the biblio detail
page.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Robin Sheat [Tue, 19 Nov 2013 03:19:12 +0000 (16:19 +1300)]
Bug 10646 - warn if mod_rewrite is not enabled
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Bug 11499: UT: Make zebra_setup.pl correctly set indexing mode
By adding the relevant environment variables to the script the generated
koha-conf.xml file for the unit tests is correct now.
Test plan:
- Verify that tests pass now:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes unit test, koha-qa.pl
Bug 11499: (regression tests) indexing modes not properly set on generated koha-conf.xml
t/db_dependent/Search.t creates its own temporary koha-conf.xml and
related files, and it fails to properly set indexing modes for
bibliographic and authority records.
The test should fail unless the main page is applied.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This UT got wrapped inside a transaction with autocommit=0 but
the rollback call was inadvertedly ommited. Adding it.
[RM note: an explicit rollback is not required, as the
transaction will roll back automatically at the end of
the DB session. Nonetheless, it hurts nothing to have
it be explicit.]
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Mon, 6 Jan 2014 16:53:33 +0000 (16:53 +0000)]
Bug 11480: Fix invalid assumptions in JSONStream test
Tests for C4::Output::JSONStream made the invalid assumption
that the hash keys of the modules internal structure
will always be returned in the same sequence.
A hash is an unordered structure. as of perl 5.18
this has beem reinforced by random seeding of the
hashing function. See the info in perldelta and
the doc for JSON.
This patch changes the tests to be sequence-neutral
where the previous test was testing that a new element
was added and an existing one was untouched these have
been separated into individual tests.
Some typos in the messages have been corrected
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test Plan
1/ Run t/Output_JSONStream.t , 8 tests should pass (or perhaps fail,
but inconsistently under perl 5.18 or greater)
2/ Apply patch
3/ Run t/Output_JSONStream.t 10 tests should pass now
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Fri, 27 Dec 2013 06:06:34 +0000 (19:06 +1300)]
Bug 7965: Silence warns in staff log
Silence warns in C4::Bookseller::GetBooksellersWithLateOrders()
to test
1/ run prove t/db_dependent/Bookseller.t
Notice lots of Use of uninitialized value $delay in numeric lt (<) at /var/lib/jenkins/jobs/Koha_master/workspace/C4/Bookseller.pm line 134 type lines
2/ apply patch
3/ run prove t/db_dependent/Bookseller.t
Notice warns are gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tiny change, positive consequences.
Passes QA script and all tests.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 10 Jan 2014 15:21:29 +0000 (15:21 +0000)]
Bug 10774: (follow-up) tweak styling of buttons on Bootstrap theme
Following a discussion with Kyle, this patch applies the
btn-mini style to the per-hold cancel and suspend/unsuspend
buttons to make them a bit smaller.
Kyle M Hall [Wed, 21 Aug 2013 11:30:54 +0000 (07:30 -0400)]
Bug 10774: Allow individual holds to be suspended and resumed from the OPAC
Right now, holds can only be suspended and resumed from the OPAC as a
whole. It would be nice to be able to suspend and resume holds on a hold
by hold basis from the OPAC.
Test Plan:
1) Apply this patch
2) Log in to the OPAC
3) Place a number of holds
4) Browse to "my summary" and select the holds tab
5) From here, test the following actions
a) Suspend a hold indefinitely ( no resume date )
b) Suspend a hold with a date to automatically resume
c) Manually resume a suspended hold
6) Disable AutoResumeSuspendedHolds, ensure the suspend until date field
is no longer visible.
7) Disable SuspendHoldsOpac, ensure all suspension related fields are
no longer visible.
Signed-off-by: Chris Rohde <crohde@roseville.ca.us> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Thu, 2 Jan 2014 04:15:56 +0000 (17:15 +1300)]
Bug 11457: avoid spurious test failure in t/db_dependent/Bookseller.t
This patch clears the subscription table so tests pass correctly if
there happens to have been a subscription with an end date before
2013-08-01.
To test
1/ Add a subscription in the serials module, with an end date before
2013-08-01
2/ run prove -v t/db_dependent/Bookseller.t
Notice tests 22 and 23 fail
3/ Apply patch
4/ run test again
5/ Notice tests succeed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests now clean the subscription table before running
the tests, so that the will always pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 21:58:52 +0000 (22:58 +0100)]
Bug 11260: Follow up - normalizing frequencies in English sample file a bit
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 21:56:45 +0000 (22:56 +0100)]
Bug 11260: Update German web installer - frequencies and numberpatterns
Translates the new files for frequencies and numberpatterns
To test:
- Run the German web installer with all sample files
- Check all files import without errors, especially frequencies and
numbering patterns
- Check frequencies in serials
- Check numbering patterns in serials
- Create a subscription, check possible choices
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 20:05:45 +0000 (21:05 +0100)]
Bug 11260: Update German web installer for 3.14
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Tue, 7 Jan 2014 04:33:05 +0000 (04:33 +0000)]
Bug 10863: (follow-up) give limited circ operator way to proceed
This patch tweaks the checkout form so that if a circ operator
doesn't have the circulate/force_checkout permission, they are
presented with a button to continue on if they ran into a restriction
on the loan. Otherwise, there was no clear way to carry on, as the
item barcode field was disabled.
Jonathan Druart [Wed, 5 Jun 2013 12:37:38 +0000 (14:37 +0200)]
Bug 10863: Add 2 circulation permissions: force_checkout and lift_restriction
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Galen Charlton [Mon, 6 Jan 2014 16:27:17 +0000 (16:27 +0000)]
Bug 6886: (follow-up) remove redundant test for singleBranchMode
This patch removes an unnecessary check of the singleBranchMode
preference that occurred in an <xsl:otherwise> clause where
we already know that singleBranchMode != 1.
Kyle M Hall [Fri, 4 Jan 2013 18:40:33 +0000 (13:40 -0500)]
Bug 6886: ensure that singleBranchMode does not display library name for reference copies
Test plan: Enable singleBranchMode and OPACXSLTResultsDisplay. Perform
a search in the OPAC which returns results containing not-for-loan
items. Before the patch these items will show their library in search
results loan items. After the patch there will be not be a library
listed, matching other items in results.
Galen Charlton [Mon, 6 Jan 2014 16:16:22 +0000 (16:16 +0000)]
Bug 11336: (follow-up) fix typo in previous follow-up
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Fridolyn SOMERS [Fri, 7 Jun 2013 12:55:18 +0000 (14:55 +0200)]
Bug 10429: improve display of library and library filter on serials claim page
In serial claims page, the library code is displayed in table instead
of library name and library filter does not work.
This patch adds the display of library name by using libraries template
plugin. It changes the Javascript library filter to make it work.
Also sets "all" filter in template (like status filter) to allow
translation and sets "all" as selected by default. The staff user's
library was selected by default, but the table was not filtered
with it.
Test plan :
- Go to serials claim of a vendor with serials of multiple libraries
=> You see branch filter with "(All)" and table shows library's names
- Check that library filter does its work
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Table now shows the branch name instead of the branchcode.
First option was named (All), matching the status pull down.
When opening the claims page, (All) is preselected and the
result list matches with the selection. Before the patch
the library was preselected, but the result list did show
late issues from all branches.
This patch is an improvement, but there is still more work to do.
- Filters are not cumulative, but when another filter is selected
the first filter is not reset.
- It's not possible to combine
2 or more filters.
Kyle M Hall [Thu, 5 Dec 2013 14:13:35 +0000 (09:13 -0500)]
Bug 11342: fix error in OPAC self registration form if BorrowersTitles is empty
If BorrowersTitles is empty, it causes the library pulldown on the self
registration page to be empty, and to have the "Saluation" field have
the option "branches".
This patch also fixes a minor string capitalization issue.
Test Plan:
1) Enable OPAC self registration
2) Set the system preference BorrowersTitles to be empty
3) View the self registration page
4) Note the lack of branches in the home library pulldown
5) Apply this patch
6) Note the branches now display in the pulldown
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in bootstrap and prog OPAC, with BorrowersTitle configured
and emptied.
Passes all tests and QA script.
Note: The titles pull down has 2 empty entries in master with
and without the patch.
Colin Campbell [Thu, 2 Jan 2014 14:42:16 +0000 (14:42 +0000)]
Bug 11468: Remove given/when from Koha::Dateutils
given and when give warnings due to their experimental
status as of perl 5.18. Replace the construct with
an if/elsif to avoid the keywords
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/DateUtils.t.
Colin Campbell [Fri, 3 Jan 2014 10:47:23 +0000 (10:47 +0000)]
Bug 11474: Remove errors caused by use of given/when statement
This patch replaces a given/when statement by an if so we
do not get warnings on compilation when using Perl 5.18 or later.
Note the perldoc for the subroutine was not correct;
code was not testing that paramater equalled the values
but that it contained them. Have amended accordingly
Have documented behaviour in case parameter contains
neither value.
Subroutine does not appear to me used elsewhere in
codebase
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/DateUtils.t.
Mark Tompsett [Wed, 27 Nov 2013 18:16:56 +0000 (13:16 -0500)]
Bug 11316 - plugin icon missing tooltip in addbiblio.pl
By adding:
title=\"Tag editor\"
into the HTML generated in addbiblio, a tooltip displaying
'Tag editor' appears when the mouse is hovered over the
plugin icon.
Test Plan:
1) Log into Staff client
2) Click the 'Search the catalog' tab
3) Type something which will generate results
4) Click the title of a result
5) Click the 'Edit' button
6) Scroll down and click the 'Edit Record'
7) Look through the various tabs and notice that all the plugin
icons have no tooltip.
8) Apply the patch
9) Refresh the page
10) All the plugin icons should have the tooltip text of
'Tag editor'.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a title attribute. Works as described.
Galen Charlton [Mon, 30 Dec 2013 16:05:51 +0000 (16:05 +0000)]
Bug 7002: fix some invalid superlibrarian permission checks
This patch fixes a problem where if a staff user has superlibrarian
permissions, but also has module-specific permissions, they are
prevent from editing item records that they should be allowed to.
To test:
[1] Turn on IndependentBranches.
[2] Register a superlibrarian staff user at branch A.
[3] Give that new account at least one other module-level
permission. This cannot be done through the user interface,
however, but can be done via SQL:
UPDATE borrowers SET flags = 3 WHERE userid = 'XXX';
[4] Log in as that new superlibrarian.
[5] Bring up the item details (catalogue/moredetail.pl) page for
an item at branch B. Note that there is no 'Edit Item' link.
[6] Similarly, try editing that item (cataloging/additem.pl). Note
that the edit form forbids you from touching the item.
[7] Finally, try editing that item using the Tools | Batch item
modification utility. Note that it doesn't allow you to do so.
[8] Apply the patch.
[9] Repeat steps 5 through 7. This time, the item actions should
be allowed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and test suite.
Galen Charlton [Thu, 2 Jan 2014 18:02:17 +0000 (18:02 +0000)]
Bug 11470: fix occassional spurious test failure in Circulation_transfers.t
This patch makes Circulation_transfers.t no longer be sensitive to
the exact time it runs, avoiding spurious test failures due
to datesent being a second off between the creation of the test
transfer and the comparison.
To test:
[1] To simulate the failure, add a "sleep(2);" after the
"#Test GetTransfers" comment and run
prove -v t/db_dependent/Circulation_transfers.t
[2] Remove the sleep and apply the patch.
[3] Verify that prove -v t/db_dependent/Circulation_transfers.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Galen Charlton [Sat, 4 Jan 2014 23:25:25 +0000 (23:25 +0000)]
Bug 11336: (follow-up) improve POD for _FixPriority()
This patch improves the POD for C4::Reserves::_FixPriority()
to (hopefully) describe its function thoroughly. It also
adjusts the call of _FixPriority() by CancelReserve() to
omit passing reserve_id, since by that point no row in
the reserves table for that request still exists.
Jonathan Druart [Fri, 13 Dec 2013 16:42:55 +0000 (17:42 +0100)]
Bug 11336: update hold queue priorities correctly when deleting holds
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Joy Nelson [Sat, 26 Oct 2013 04:14:48 +0000 (00:14 -0400)]
Bug 11066: make RIS and Bibtex exports RDA compatible
RIS and Bibtex exports from staff side and OPAC edited to
allow for additional publisher RDA tag (264). Script will
look first for 264 then fall back to 260 when pulling publisher
data from MARC21 records.
Test Plan:
1. Create RDA and non RDA record
2. In OPAC, export both as RIS and Bibtex - verify publisher information
is exported
3. On staff side, export records as RIS and Bibtex, verify publisher
information is exported.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs pointed out by the QA script.
Works nicely in my tests, no regressions found.
Mathieu Saby [Sun, 3 Nov 2013 18:04:44 +0000 (19:04 +0100)]
Bug 11192: Fix lf and ff07-02 definition in ccl.properties
ff7-02 1=87020 (position 2 of field 007 in MARC21) should be
ff7-02 1=8702
lf 1=8833
lf fiction
fic fiction
should be
lf 1=8833
fiction lf
fic lf
To test :
1. apply the patch
2. copy the modified ccl.properties into your active Zebra config
directory
3. reindex zebra (rebuild_zebra.pl -b -x -r -v)
4. make some searches using the fixed indexes
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Samuel Crosby [Mon, 30 Dec 2013 03:52:49 +0000 (14:52 +1100)]
Bug 9654: add space between amount and currency symbol in basket group display
Changed:
$total .= $bookseller->{invoiceprice} // 0;
Into:
$total .= " " . ($bookseller->{invoiceprice} // 0);
in order to add a space between the total and currency in
the basket group.
Revised test plan:
1) Log into staff client
2) Acquisitions
3) Click 'Search' in the 'Manage orders' box.
4) Click '+ New basket' beside a vendor name.
5) Type 'Bug 9654 Test 1' into basket name.
6) Click 'Save'
7) Click 'Add to basket'
8) Click 'From an external source'
9) Type 'Green Eggs and Ham' into the Title text box.
10) Click 'Search'
11) Click 'Order' on any one of the results.
12) Click 'Add Item' in the 'Item' box.
13) Select a Fund from the dropdown in the
'Accounting details' box.
14) Click 'Save'
15) Click 'Close this basket'
16) Click 'Yes, close (Y)' without checking the attach to a
basket group.
17) Click the 'Basket groups' tab.
18) Click '+ New basket group'
19) Notice the listing in 'Ungrouped baskets' lacks a space
between the number and the currency. (e.g. Total: 0USD)
20) Apply patch (git bz apply 9654)
21) Refresh the page
22) Notice there is now a space. (e.g. Total: 0 USD)
23) Run the Koha QA Tool: (~/qa-test-tools/koha-qa.pl -v 2 -c 1)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests.
Marcel de Rooy [Mon, 16 Dec 2013 11:01:21 +0000 (12:01 +0100)]
Bug 11398: A typo occurred with occured
This patch cures occured and makes occurred occur.
Note that I found them while testing bug 11170.
In a follow-up of 11170, I corrected this typo in parcels.tt.
This patch touches update22to30.pl and modborrowers.tt
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes a typo in 2 files.
Jonathan Druart [Thu, 24 Oct 2013 13:28:42 +0000 (15:28 +0200)]
Bug 11131: display authority summary correctly when searching by all authority types
The summary is built using the authtypecode selected from the interface.
So when a search is launch on all auth types, the summary is not
correctly built by the BuildSummary routine.
It should get the authtypecode from the authority (call to
GetAuthTypeCode).
To test:
1/ go to authorities/authorities-home.pl
2/ search <something> by authtype personal name
3/ results are displayed with summary
4/ now select the default entry and search again the
results display but without the summary
5/ apply the patch
6/ search default again, now summary shows
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with a UNIMARC database, works as described.
All tests and QA script pass.
Galen Charlton [Mon, 30 Dec 2013 18:50:04 +0000 (18:50 +0000)]
Bug 10277: (follow-up) if no userenv is set, act like a superlibrarian
This patch fixes an error caught by t/db_dependent/Acquisition.t, and
adjusts C4::Context::IsSuperLibrarian() to return true if no
userenv is set. This is done on the basis that if no userenv is set,
calls to C4::Context routines are being made from a command-line script,
and if you have access to the command line of a running Koha instance,
you implicitly already have better than superlibrarian access.
Jonathan Druart [Wed, 6 Nov 2013 13:54:36 +0000 (14:54 +0100)]
Bug 11208: If no smsalertnumber is defined, the message is marked as failed
For DUE message (and PREDUE, etc.) there are no check before sending the
message to the message_queue table.
This check avoids to try to send again and again the same message. Now
it is marked as "failed".
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch a sms notice will remain as 'pending' forever.
With the patch applied, the status is set to 'failed'.
Galen Charlton [Mon, 30 Dec 2013 16:45:45 +0000 (16:45 +0000)]
Bug 11208: regression test for failing SMS messages
This patch adds a regression test for verifying that queued
SMS messages meant for patrons who have no SMS alert number
set are marked as failed after the first attempt to send them.
To test:
[1] Run prove -v t/db_dependent/Letters.t. The fourth
test should.
[2] Apply the main patch and run t/db_dependent/Letters.t
again. This time, all tests should pass.
projects / koha.git / log