Hector Castro [Thu, 26 May 2016 14:41:08 +0000 (08:41 -0600)]
Bug 16594: Orders by fund report has wrong link to css and other issues
Orders by fund has wrong link to css and other issues
-> The example in the wiki is wrong: <https://wiki.koha-community.org/wiki/DataTables_HowTo>
<link rel="stylesheet" type="text/css" href="[% themelang %]/css/datatables.css" />
[% INCLUDE 'datatables.inc' %]
-> Must be:
<link rel="stylesheet" type="text/css" href="[% interface %]/[% theme %]/css/datatables.css" />
-> Missing <th></th> in <tfoot> tag
-> Wrong word used "Date deceived" should be "Date received"
NOTE: Wiki needs to be updated
To test:
-Look the code and notice about if else cluase without curly brackets
-Go to Reports > Orders by fund
-Play with: in filters 'All fund' Output: 'to screen into the browser'
-You will see a DataTable displayed in screen clutter
-Notice about 'Date deceived' and the foot of table
-Apply patch
-Refresh or execute again the report
Signed-off-by: Sinziana <s.paltineanu@berlin.bard.edu> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 27 May 2016 11:48:10 +0000 (13:48 +0200)]
Bug 16717: Remove hardcoded category from Holds.t
There is actually no need to use the hardcoded patron category S in
this test.
Test plan:
Run t/db_dependent/Holds.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Test passes OK Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 27 May 2016 06:35:57 +0000 (08:35 +0200)]
Bug 16607: Remove CPL/MPL from two unit tests
Test t/db_dependent/Accounts.t:
This test created a MPL branch, but did not use it any more.
Test t/db_dependent/Items/AutomaticItemModificationByAge.t:
This test still used CPL/MPL branches. Now it uses two new branches.
Test plan:
[1] Run t/db_dependent/Accounts.t.
[2] Run t/db_dependent/Items/AutomaticItemModificationByAge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Both tests pass OK Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The current test had no warnings, when you have no MPL branch, and only
catches the warn from the second build on line 57. If you do have MPL,
a warning comes from line 56.
This patch fixes it by removing MPL from the test. A new branch is created
first and then we try to create it again.
Test plan:
Run the test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 11 May 2016 12:49:07 +0000 (14:49 +0200)]
Bug 16500: Catch two warns in TestBuilder.t with warning_like
When testing a wrong case in TestBuilder.t, two warns show up.
We can catch them with warning_like.
Test plan:
Run t/db_dependent/TestBuilder.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The update_dbix_class_files.pl script generates ActionLog.pm instead, which is
already on the source tree.
To test:
- Apply the patch
=> SUCCESS: Koha/Schema/Result/ActionLogs.pm is removed
- Run:
$ mysql -uroot
> CREATE DATABASE dbic; \q
$ mysql -uroot dbic < kohaclone/installer/data/mysql/kohastructure.sql
$ misc/devel/update_dbix_class_files.pl --db_name dbic --db_user root
=> SUCCESS: Koha/Schema/Result/ActionLogs.pm is not re-generated
- Run:
$ git grep ActionLogs
=> SUCCESS: There's no code using it
- Sign off
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Wed, 8 Jun 2016 10:24:56 +0000 (10:24 +0000)]
Bug 16692 - Error "No method update!" when creating new serial issue
An improper method call was left over in C4::Serials::NewIssue from the
switch from DBIx::Class to Koha::Object.
Test Plan:
1) prove t/db_dependent/Serials.t
2) Note the errors
3) Apply this patch
4) prove t/db_dependent/Serials.t
5) No errors!
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 6 Jun 2016 12:31:29 +0000 (13:31 +0100)]
Bug 16670: (bug 15823 follow-up) CGI->param should not be called in list context
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 23 May 2016 07:03:23 +0000 (09:03 +0200)]
Bug 16502: Replace a few other ok-calls by is-calls
Trivial changes that speak for themselves..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 23 May 2016 06:58:02 +0000 (08:58 +0200)]
Bug 16502: Adjust test for GetPlugins
The current test assumes that GetPlugins will return the test plugin
as the first one in the array. This is not correct.
This patch adjusts the test to a grep.
Test plan:
Run the test.
Bonus: Add additional plugins. Run the test again.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 16 May 2016 17:00:16 +0000 (19:00 +0200)]
Bug 16502: Add additional test to Plugins.t
In order to verify if the delete now really works, we add one test
in Plugins.t.
Test plan:
[1] Run the test.
[2] Bonus: Comment line 63 in Plugins.t where delete is called.
Run the test again. It should fail now.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 16 May 2016 15:19:54 +0000 (17:19 +0200)]
Bug 16502: Table koha_plugin_com_bywatersolutions_kitchensink_mytable not always dropped after running Plugin.t
If you run Plugin.t, the above table will still be present (when you
did not enable UseKohaPlugins). This would trigger a warning when
running the test a second time.
Why? The uninstall call does its work not completely due to a small
inconsistency in Koha::Plugins::Handler::delete when calling run
without the enable_plugins parameter.
This patch resolves that inconsistency and also removes an unneeded skip
in Plugin.t in case the KitchenSink module already exists.
Note: This is a small fix. But I wonder if the Handler routines run and
delete should not have been implemented in Koha::Plugins::Base.
Also note that plugins/plugins-uninstall.pl will not be affacted by this
change, since it checks whether the pref is enabled before calling the
delete method.
Test plan:
[1] Do not yet install this patch.
[2] Verify that plugins are enabled in koha-conf.xml.
[3] Disable UseKohaPlugins in System Preferences!
[4] Run t/db_dependent/Plugins.t.
[5] Verify that table koha_plugin_com_bywatersolutions_kitchensink_mytable
still exists. (It should have been deleted.) Remove it manually.
[6] Apply this patch.
[7] Run the test again.
[8] Verify that the table does not exist.
[9] Run the test again (without warnings).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On running all Items-related tests some useless diag showed up. Removing it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 3 May 2016 10:08:47 +0000 (11:08 +0100)]
Bug 13074: Use Koha::Cache to cache the defaults values of a MARC record
With the global %default_values_for_mod_from_marc variable, the changes
made to the marc_subfield_structure table and especially the links
between MARC and DB fields are not safe and might be outdated (if a
field is linked/unlinked)
Test plan:
Under Plack:
- Link the barcode field, edit a record and set a barcode.
- Remove the mapping for the barcode field and then update again the
barcode of the record.
The items.barcode DB field must not have been updated.
Without this patch, the field should have been updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
remi [Tue, 11 Aug 2015 15:10:45 +0000 (11:10 -0400)]
Bug 12748 - Fixes duplicate serials with an "expected" status bug
Added a new sub to Serials.pm to be able to get serials with their statuses.
Now the sub ModSerialStatus checks for other serials with an "expected" status before doing anything.
Also modified Serials.t to be able to test those changes.
Test Plan
1) Apply patch
2) Run ./t/db_dependent/Serials.t
3) Validate that there are no errors
4) Go on "Serial collection information" page for a serial of your choice
5) Click on "Generate next"
6) Change the status of the original serial from "late" to "expected"
7) Change the newly generated serial from "expected" to "delete"
8) Validate that there are no new serials created by instruction 7 and that the serial was deleted
9) Run ./t/db_dependent/Serials.t
With QA Fixes
- Use the constant instead of the code (1 vs EXPECTED)
- Avoid interpolation in query
- use selectall_arrayref instead of fetchall_arrayref
Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 26 May 2016 11:26:33 +0000 (07:26 -0400)]
Bug 16592 - Use Bootstrap modal for MARC and Card preview on acquisitions receipt summary page
This patch replaces Greybox modals on the acquisitions receipt summary
page with Bootstrap modals.
To test, apply the patch and go to Acquisitions -> Invoices -> View an
invoice -> Go to receipt page.
- In the list of pending orders, test the "MARC" and "Card" links for
various titles. Each should trigger a Bootstrap modal with the correct
content.
- Repeat the same tests in the list of already received orders.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Karl Holten [Mon, 18 Apr 2016 19:17:40 +0000 (14:17 -0500)]
Bug 16289: Abbreviated formatting for numbering patterns
To test:
1) Go to Serials -> Manage numbering patterns
2) Create .New Numbering Pattern.
3) Type in a name of 'Day, Month, Season' and a numbering formula of '{X} {Y} {Z}'.
4) Set up the X field as following: add 1, every 1, set back to 1, when more than 30.
5) Select the formatting for X. There should be six options available instead of the original three. Use the formatting 'Name of Day (abbreviated)'.
5) Set up the Y field to add 1 every 30 reset back to 1 when more than 12. Use the formatting option 'Name of month (abbreviated)'.
6) Set up the Z field to add 1 every 90 reset back to 1 when more than 4. Use the formatting option 'Name of season (abbreviated)'.
8) Select a frequency of 1/day.
9) Select a first issue publication date of Jan 1, 2016.
10) Set X to begin with 5 and have an inner counter of 5. Set Z to begin with 3 and have an inner counter of 10.
11) Click the 'Test Pattern' button.
12) Abbreviated versions of the day, month and season should appear in the test pattern.
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Claire Gravely [Sat, 4 Jun 2016 11:30:30 +0000 (13:30 +0200)]
Bug 16165 - Include link to ILS-DI documentation page in ILS-DI system preference
There is no clue in the system preference about the nice ILS-DI documentation
once you turn it on. We should include a note and the link, similar to how we
do it for the web self checkout.
Test plan:
Syspreference ILS-DI should now include URL in description.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Thu, 19 Nov 2015 22:29:44 +0000 (11:29 +1300)]
Bug 15213 - Fix tools sidebar to highlight Patron lists when in that module
To test:
Add some patron lists, navigate through the lists interface and make
sure that while you are in the module, that Patron lists is highlighted
on the sidebar.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: fix alignement
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Sat, 4 Jun 2016 15:11:00 +0000 (11:11 -0400)]
Bug 16637: Dependency for C4::Tags not listed
Added optional dependency, so as to explain why testing
explodes when the Enhanced Content system preference
TagsExternalDictionary is set. It is optional, because not only
does TagsExternalDictionary have to be set, but TagsEnabled
must be 'Allow'.
Also tweaked C4/Tags.pm to ignore TagsExternalDictionary,
if Lingua::Ispell is not installed. A warning is given.
TEST PLAN
---------
1) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
2) sudo apt-get install liblingua-ispell-perl
-- should be a new install
3) prove t/db_dependent/Tags.t
-- should work fine
4) sudo apt-get remove liblingua-ispell-perl
5) prove t/db_dependent/Tags.t
-- should explode
6) Clear the Enhanced Content system preference
TagsExternalDictionary
7) prove t/db_dependent/Tags.t
-- should work fine
8) apply patch
9) prove t/db_dependent/Tags.t
-- should work fine
10) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
11) prove t/db_dependent/Tags.t
-- should work, with warning.
12) sudo apt-get install liblingua-ispell-perl
13) prove t/db_dependent/Tags.t
-- should work fine
14) run koha qa test tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Post-hackfest hotel Olympia lobby signoff. Kalimera!
Works as expected.
At this moment the Tags.t test does not need the database btw,
but the module should have much more test coverage.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Jun 2016 08:31:34 +0000 (10:31 +0200)]
Bug 16636: [QA Follow-up] Move External_BakerTaylor.t to t
When we mock the preferences completely now, we do not need
db access anymore.
Test plan:
Run the test without exporting KOHA_CONF.
The test passes with some warns about koha-conf.xml.
If you point KOHA_CONF to etc/koha-conf.xml, you have no warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Jun 2016 07:30:51 +0000 (09:30 +0200)]
Bug 16636: [QA Follow-up] Make BakerTaylor plack safe
Initialize file level lexicals each call. Do not call _initialize
outside the module.
Adjust test by mocking preferences.
Test plan:
Run t/db_dependent/External_BakerTaylor.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested module with trivial script under Plack/memcached by toggling
the associated preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 2 Jun 2016 00:43:30 +0000 (20:43 -0400)]
Bug 16636: t/00-load.t warning from C4/External/BakerTaylor.pm
Since the tests are expecting an initialize function, the
initialize call was just moved outside of the INIT block.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for BakerTaylor
2) prove `git grep -l BakerTaylor | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Florent Mara <florent.mara@gmail.com>
NOTE: Tweaked test plan based on comment #4,
Added sign off based on comment #6.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 6 Jun 2016 08:49:06 +0000 (10:49 +0200)]
Bug 16635: [QA Follow-up] Eliminate some global package vars
[1] $branch is only related to line 123 as fallback.
[2] $width moved to a constant; sub width is not used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the corresponding plugin in item editor.
Test t/db_dependent/Barcodes.t and Barcodes_ValueBuilder.t still pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 2 Jun 2016 00:41:27 +0000 (20:41 -0400)]
Bug 16635: t/00-load.t warning from C4/Barcodes/hbyymmincr.pm
According to http://perldoc.perl.org/vars.html, "our" should
be a reasonable substitute for the "use vars". By declaring as
"our", and removing the INIT, prove t/00-load will no longer
generate a warning about INIT for the C4/Barcodes/hbyymmincr.pm
module.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for hbyymmincr
2) prove `git grep -l hbyymmincr | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 1 Jun 2016 20:28:51 +0000 (22:28 +0200)]
Bug 16634: Translatability: Fix issue in memberentrygen.tt
This patch fixes a small translatability issue in
koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt
The sentence following sentence was splitted by HTML tags:
"Attribute value xxxxx is already in use by another patron record."
To test:
- Review code
- Apply patch
- In Admin, create a unique patron attribute type and try to give
two patrons the same value for this attribute type.
Signed-off-by: Rocio Dressler <rocio@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 1 Jun 2016 19:26:55 +0000 (21:26 +0200)]
Bug 16633: Translatability: Issues in tags/review.tt (sentence splitting)
This patch fixes translatability issues in
koha-tmpl/intranet-tmpl/prog/en/modules/tags/review.tt
(isolated words by sentence splitting).
To test:
- Review code and verify that changes make sense.
Signed-off-by: Rocio Dressler <rocio@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Tue, 31 May 2016 08:17:13 +0000 (10:17 +0200)]
Bug 16620: Translatability: Fix problem with isolated word "please" in auth.tt
This patch fixes a translatability problem (syntax in different languages) with a tag-isolated word "please"
in koha-tmpl/intranet-tmpl/prog/en/modules/auth.tt
To test:
- Verify in code that there is no sentence spliting by a-tags (lines 80/84).
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
phette23 [Fri, 27 May 2016 17:13:14 +0000 (10:13 -0700)]
Bug 16613: fix MARC 09X help links
The 09X MARC fields, such as 099 local call number or 090
locally-assigned Library of Congress call number, all point to
non-existent pages on the LC website, e.g.
http://www.loc.gov/marc/bibliographic/bd090.html
Test plan:
- enter the advanced cataloging editor
- begin to input any MARC tag of form 09X
- click the help link at the bottom of the browser window
=> Without this patch, taken to a URL of form `'http://www.loc.gov/marc/bibliographic/bd' +
tag + '.html'` which is broken because the only documentation for
these tags is at https://www.loc.gov/marc/bibliographic/bd09x.html
=> With this patch applied, the link is correct
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Wed, 1 Jun 2016 14:41:55 +0000 (16:41 +0200)]
Bug 16540 - Clean up opac-auth.tt for translatability
This patch fixes translatability issues in opac-auth.tt (ugly
translations caused by sentence splitting).
It was necessary to change indentation to make the the file more
readable and to make sure that changes have no side effects.
The changes do not touch the overall functionallity.
To test:
- Review code to verify that no functionality change is introduced
and to verify that the text changes make sense.
- Apply patch, verify that OPAC login page behaves as before.
UPDATE: Amended for comment #10 / mv Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16667: Unused variable and function call in circulation.pl
This patch removes an unused occurence of the $branches variable. Probably a
leftover from a recent rewrite.
To test:
- Run:
$ git grep '$branches' circ/circulation.pl
=> FAIL: Only on occurence of the variable
- Apply the patch
- Run:
$ git grep '$branches' circ/circulation.pl
=> SUCCESS: The variable has been removed
- Sign off :-D
Regards
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 27 May 2016 12:02:42 +0000 (14:02 +0200)]
Bug 16609: Catch warning from Koha::Hold in Hold.t
Before this patch, the suspend step triggers a warn from Koha::Hold.
Now we catch it.
Test plan:
Run the test. Do not see the warning about unable to suspend.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
NOTE: Nice clean up!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Fri, 27 May 2016 08:50:00 +0000 (10:50 +0200)]
Bug 16608 - Missing entity nbsp in some XML files
The special character "non breaking space" is not contained in XML syntax by default.
So we add it in the file header :
<!DOCTYPE stylesheet [<!ENTITY nbsp " " >]>
Even if the source code files do no contain this character, it can be that translated files contain it.
French for example "Titre :".
This entity is missing in all files in koha-tmpl/intranet-tmpl/prog/en/data/ and in some files of koha-tmpl/intranet-tmpl/prog/en/xslt.
Test plan :
- generate French templates:
cd misc/translator
./translate install fr-FR
cd ../..
- run test:
prove -v t/00-valid-xml.t
you get failing error message
- apply this patch
- translate again
- run test again: it passes
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described following test plan
Tes pass, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fridolin Somers [Fri, 27 May 2016 08:46:44 +0000 (10:46 +0200)]
Bug 16608 - Add xsd extension to t/00-valid-xml.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Sat, 28 May 2016 07:44:40 +0000 (09:44 +0200)]
Bug 16589 - Quote of the day: Fix upload with csv files associated to LibreOffice Calc
To reproduce:
- Install LibreOffice and make sure that csv files are associated to Calc
(Note: tested with Firefox 46.0.1 on Windows 8)
- Go to Home > Tools > Quote editor > Quote uploader
- Try to upload a valid CSV (e.g. Example from Bug 15684)
Result: File can not be uploaded
(Incorrect filetype: application/vnd.sun.xml.calc)
To test:
- Apply patch
- Try to upload again
Expected result: Quotes are imported.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Can't reproduce on a Mac but get it fails on a Windows Box: fixed with this
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Can't recreate on debian but the fix looks safe.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Mon, 23 May 2016 12:16:02 +0000 (14:16 +0200)]
Bug 16560: Translatability: Issues with "The entered " in opac-memberentry.tt
This patch fixes two splitted sentences to avoid translation issues:
The entered <a href="#borrower_cardnumber">card number</a> is the wrong length.
The entered <a href="#borrower_cardnumber">card number</a> is already in use.
To test:
Apply patch and verify that html in the 2 that are changed is correct and that
they are not splitted by a-tags.
Note: I could not figure out under which conditions this code displays in
the OPAC self registration form.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 26 May 2016 16:29:38 +0000 (12:29 -0400)]
Bug 15676 - Actions in pending offline circulation actions are not translatable
This patch modifies the offline circulation transaction processing page
so that English strings describing actions are processed in the template
rather than being output directly from the script.
To test, apply the patch and create an offline circulation file
containing at least one checkout, one check-in, and one payment.
- Upload the file and choose 'Add to offline circulation queue.'
- View pending offline circulation actions
- In the list of pending actions, the actions column should show "Check
out" instead of "issue," "Check in" instead of "return," and "Payment"
instead of "payment."
Strings appear as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14897 - Header name mismatch in ./modules/catalogue/detail.tt
We changed the detail.tt file for staff interface from Publication details to
"Serial enumeration / chronology" to match the cataloguing editor.
Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14605 - Corrects the individual fine's description
When paying a fine, the description is built out of the borrower's type and title, instead of the actual fine's description.
STEPS:
1) in the staff, go to a user with a fine to pay.
a) if none, go to a user and Fines>>"Create manual invoice" with a distinctive description.
2) In Fines>>Pay fines, click the "Pay" button on the line of the fine.
3) This will take you a "Pay an individual fine" screen, where the description will look like "Staff Mrs", for the category and title of the borrower.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 10 May 2016 16:36:03 +0000 (16:36 +0000)]
Bug 16492 - Checkouts ( and possibly checkins and other actions ) will use the patron home branch as the logged in library
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 7 Jun 2016 09:20:53 +0000 (10:20 +0100)]
Bug 10459: Add tests for borrowers.updated_on
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 26 May 2016 01:57:34 +0000 (21:57 -0400)]
Bug 10459 renamed timestamp to updated_on
Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 10 Nov 2014 13:17:40 +0000 (14:17 +0100)]
Bug 10459: Borrowers should have a timestamp
This patch adds a timestamp column to the borrowers table in kohastructure
and updatedatabase. (And also to the deletedborrowers table.)
A timestamp may be useful in synchronizing with external systems (among other
reasons).
Test plan:
Run updatestructure on an existing database, or install a new one.
Verify that the borrowers table has a timestamp now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested updatestructure and running kohastructure.sql.
Passed t/db_dependent/Members.t.
updatedatabase.pl did not apply. I edited and then run it. Columns were added as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Bug 10459: Follow up to update to atomic update methodology
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New column created, no errors.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 8 Jun 2016 13:52:04 +0000 (14:52 +0100)]
Bug 16695: Require Exception::Class 1.38 instead of 1.39
Looking at
http://cpansearch.perl.org/src/DROLSKY/Exception-Class-1.40/Changes
there is no need to require 1.39
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Galen Charlton [Tue, 7 Jun 2016 00:44:07 +0000 (00:44 +0000)]
Bug 16647: update debian/control for 16.*
This patch updates debian/control* to match what
was used for building the 16.05.00 packages, and includes
changes to:
- specify a floor for the Swagger2 version
- add dep on libio-socket-ip-perl, which is needed
for the package to work on Debian Wheezy
- suggest libwww-youtube-download-perl
Signed-off-by: Galen Charlton <gmcharlt@gmail.com> Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Galen Charlton [Tue, 7 Jun 2016 01:42:59 +0000 (01:42 +0000)]
Bug 16675: fix breakage of t/Languages.t
This patch fixes test breakage introduced by the patch for bug 16088,
which added caching of getlanguages(). Upon inspection, it looks like
the patch for 16088 does not introduce a regression on bug 10560,
so this patch adds a couple cache-clearings.
To test
-------
[1] Verify that t/Languages.t passes.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 30 May 2016 16:16:36 +0000 (12:16 -0400)]
Bug 16618: 00-load.t prematurely stops all testing
Rather than add/remove regular expressions to skip modules (like bug 9054), encapsulate the decision logic into a separate function.
Currently there are three libraries which trigger halts:
Koha::NorwegianDB (which was already there)
Koha::ElasticSearch::Indexer
Koha::SearchEngine::Elasticsearch::Search
TEST PLAN
---------
1) prove t/00-load.t
-- should barf horribly on Catmandu stuff
if not: sudo apt-get remove libcatmandu-marc-perl
then repeat step.
2) apply patch
3) prove t/00-load.t
-- should not barf horribly
4) run koha qa test tools
NOTE: The four optional modules for Koha::NorwegianDB are
listed in the PerlDependencies.pm, while there is
no mention of Catmandu libraries at all there.
This may be another bug which needs fixing.
TECH NOTES (for ideas of how to tinker around):
These three things should trigger the three module cases:
sudo apt-get remove libcatmandu-marc-perl
sudo apt-get remove libcatmandu-store-elasticsearch-perl
sudo apt-get remove libconvert-basen-perl
You probably had koha-perldeps installed before, so the following wil mostly fix:
sudo apt-get install koha-perldeps libcatmandu-marc-perl
And in case you didn't have elastic search stuff installed:
echo deb http://packages.elastic.co/elasticsearch/1.7/debian stable main | sudo tee /etc/apt/sources.list.d/elasticsearch.list
wget -O- https://packages.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add -
sudo apt-get update
cd ~
wget http://debian.koha-community.org/koha/otherthings/elasticsearch_deps.tar.gz
tar xvf elasticsearch_deps.tar.gz
cd es_deps
sudo dpkg i lib*
sudo apt-get install -f
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Galen Charlton <gmcharlt@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 26 May 2016 09:55:09 +0000 (10:55 +0100)]
Bug 16596: Display library and patron category descriptions instead of their code
Test plan:
On circ/circulation-home.pl and reserve/request.pl, search for patrons
The descriptions for the libraries and patron categories should be
displayed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of Bug 13336
Works as described, now descriptions instead of codes.
No errors
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=16455
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16578: Fix wide character errors in opac-export.pl
This simple patch fixes wide character warning raised by opac-export.pl when
'MARC (Unicode/UTF-8)' and 'MARC (Unicode/UTF-8, Standard)' formats are chosen for downloading records.
To test:
- Have records indexed
- Open your OPAC logs:
$ tail -f /var/log/koha/kohadev/opac-error.log
- Open the detail page in the opac for a record
- Choose Save record > MARC (Unicode/UTF-8)
=> FAIL: opac-export.pl: Wide character in print at /home/vagrant/kohaclone/opac/opac-export.pl line 116., referer: http://localh...
- Choose Save record > MARC (Unicode/UTF-8, Standard)
=> FAILE opac-export.pl: Wide character in print...
- Apply the patch
- Choose Save record > MARC (Unicode/UTF-8)
=> SUCCESS: No warnings raised.
- Choose Save record > MARC (Unicode/UTF-8, Standard)
=> SUCCESS: No warnings raised.
- Sign off :-D
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 11 May 2016 12:04:38 +0000 (13:04 +0100)]
Bug 16465: Fix typo issues vs checkouts
Test plan:
Confirm the wording is correct
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 11 May 2016 11:57:47 +0000 (12:57 +0100)]
Bug 16465: discharge - Add a title tag at the OPAC
Test plan:
Confirm that the opac-discharge.pl has now a title
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 3 May 2016 10:03:52 +0000 (11:03 +0100)]
Bug 16428: Use the biblio framework to know if a field is mapped
The subroutine _build_default_values_for_mod_marc takes the
frameworkcode in parameter, but ModItemFromMarc did not pass it.
It uses it to know if a field is mapped or not to a Koha field
(C4::Koha::IsKohaFieldLinked).
Consequently the default framework ("") was always used.
This bug has been found working on bug 13074 and has been put on a
separate bug report to ease the backport.
Test plan:
Without this change, the tests added by bug 16428 won't pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 4 May 2016 18:43:43 +0000 (19:43 +0100)]
Bug 16441: Do not use a package variable to cache C4::Letters::getletter
C4::Letters::getletter use a package variable (%letter) to cache letter
returned by the subroutine.
I have not found any direct issues caused by that but it is safer to
remove it.
It won't be a big deal to hit the DBMS to get a valid letter when
needed.
No test plan here, just confirm that the changes make sense.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Confirm that performance loss is just a millisecond or so per
subsequent call of getletter.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jacek Ablewicz [Wed, 8 Jun 2016 08:46:18 +0000 (10:46 +0200)]
Bug 16678: updatedatabase.pl 3.23.00.006 DB upgrade crashes if subscription_numberpatterns.numberingmethod contains parentheses
It seems that if subscription_numberpatterns.numberingmethod contains parentheses, updatedatabase.pl crashes when running the 3.23.00.006 DB upgrade snippet, with the following error:
[Mon Jun 6 09:06:54 2016] updatedatabase.pl: Unmatched ( in regex; marked by <-- HERE in m/ ( <-- HERE / at /home/koha/kohaclone/installer/data/mysql/updatedatabase.pl line 11498.
Steps to reproduce:
1/ Have a Koha DB version<3.23.00.006
2/ Create a subscription numbering with parentheses in it:
ie "Vol. (Month, Year)" with pattern
Vol. {X} ({Y}, {Z})
3/ Add some serials using that numbering method so that serialseq is filled in DB:
ie "Vol. 16 (February, 2015)"
4/ Run the updatedatabase.pl script either from the cli or just start the webinstaller
5/ The error is produced
To test:
1/ apply patch
2/ try to reproduce this issue once again, should be fixed now
3/ have a look at the code, make sure the changes are consistent
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: I have not tested the patch, but the diff looks good.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 24 May 2016 18:57:16 +0000 (19:57 +0100)]
Bug 16570: Do not tell all checked-in items are part of a rotating collection
When an item is checked-in a message will tell you it's part of a
rotating collection, even if it's not true.
Test plan:
Make sure the message appears only when needed.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Jun 2016 09:49:45 +0000 (11:49 +0200)]
Bug 16443: [QA Follow-up] Add two tests for get_fields
Adds t/db_dependent/Members/Statistics.t.
Test plan:
Run the test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 4 May 2016 19:08:53 +0000 (20:08 +0100)]
Bug 16443: Make C4::Members::Statistics plack safe
If the prefs is updated, the fields won't be.
To make sure we already fetch updated values, we should remove the
package variable and define it in the subroutine.
There is not test plan, just make sure the changes are consistent.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 5 May 2016 15:58:06 +0000 (16:58 +0100)]
Bug 16455: Remove the "Too late to run INIT block" from C4::Tags
The pref TagsExternalDictionary is used to tell Lingua::Ispell to use an
other dictionary, different from the default one (/usr/bin/ispell).
To do so we need to set $Lingua::Ispell::path to the expected path.
It's currently done in the INIT block.
If you try to use C4::Tags, you will get the famous "Too late to run
INIT block at C4/Tags.pm line 74." warning. Plack use the INIT block to
load functions at run time, when we are using C4::Tags when hitting a pl
script, the compilation phase is finished and it's "too late to run INIT
block" from C4::Tags.
I do not really know if it has an impact on the behavior of
Lingua::Ispell (i.e. is the path redefined?), but I know that this INIT
block is not executed when we want.
Test plan:
under Plack,
- hit /cgi-bin/koha/opac-search.pl and confirm that the warning does no
longer appears
- Use another dictionnary (??), fill TagsExternalDictionary with its
path and confirm that it is used by the tags approval system
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 17 May 2016 13:38:04 +0000 (14:38 +0100)]
Bug 16508: Updating a syspref requires parameters_remaining_permissions
And not all of parameters flags.
Test plan:
1/ Create a staff user.
2/ Go to details, select more->set permissions.
3/ Set catalogue, Manage Koha system settings (Administration panel),
manage circulation rules, and Remaining system parameters permissions.
4/ Log in as the new staff user, go to administration > system
preferences. Change a syspref and save it... it will save correctly.
5/ Log back in as superlibrarian
6/ On the 'set permissions' screen, un-check 'manage circulation rules'
and save.
7/ Log back in to the new staff user, and try to change the same
systemprefrence and save.
Followed test plan, works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Fri, 13 May 2016 19:46:42 +0000 (20:46 +0100)]
Bug 16518: Fix Plack variable scoping problem in opac-addbybiblionumber.pl
The script opac/opac-addbybiblionumber.pl is not plack safe because the
variable @biblios is declared with our and is not assigned to an empty
array (so not reset).
The issue:
When trying to add items to a list (virtualshelf), the biblionumbers are
added to the @biblios variable and the list is not reset between each
run.
Test plan:
Check from records from the result list and add them
to a list.
Cancel or save and re-add them (or others) to a list (same or
different).
=> Without this patch, the list of records will never stop growing, the
previous items added are still listed when adding new ones.
=> With this patch, the behavior is the one expected.
Rocio Dressler [Sat, 4 Jun 2016 09:24:45 +0000 (02:24 -0700)]
Bug 16537 - Overdue and Status triggers grammar
Test plan:
1) Go to the staff client
2) Click on Tools - Overdue notice/status triggers
3) Confirm that the first sentence reads "a" checkout rather than "an" checkout
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 9 May 2016 16:27:51 +0000 (17:27 +0100)]
Bug 16088: Introduce Koha::Cache::Memory::Lite to cache the language
The goal of this patch is to avoid unecessary flush of the L1 cache on
creating a new CGI object each time C4::Languages::getlanguage is called
without a CGI object.
The new class Koha::Cache::Memory::Lite must be flushed by the CGI
constructor overide done in the psgi file. This new class will ease
caching of specific stuffs used by running script.
Test plan:
At the OPAC and the intranet interfaces:
Open 2 different browser session to simulate several users
- Clear the cookies of the browsers
- User 1 (U1) an User 2 (U2) should be set to the default language
(depending on the browser settings)
- U1 chooses another language
- U2 refreshes and the language used must be the default one
- U2 chooses a third language
- U1 refreshes and must be still using the one he has choosen.
Try to use a language which is not defined:
Add &language=es-ES (if es-ES is not translated) to the url, you should
not see the Spanish interface.
Jonathan Druart [Wed, 11 May 2016 11:00:01 +0000 (12:00 +0100)]
Bug 16458: Update library when a guarantor is set
If you edit a patron from the Edit link of the patron information block
(step 1 of the memberentry script), the branchcode is not displayed. If
you set a guarantor to a child from this form, a JavaScript error will
be raised:
JavaScript error form.branchcode is undefined
It happens because there is the branchcode is not displayed and there is
no element with a branchcode name.
To avoid this issue, a branchcode hidden input is added to the form and
it will be updated when a guarantor is selected (same behavior as when
you edit a patron using the complete form).
Test plan:
Edit a patron using the Edit link of the patron info block (not the Edit
button in the toolbar)
Set a guarantor
=> Notice that the branchcode of the patron has been updated with the
branchcode of the guarantor
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Mon, 16 May 2016 14:52:17 +0000 (10:52 -0400)]
Bug 16529 - Clean up and improve upload template
This patch makes some fixes and improvements to the template for Tools
-> Upload, including markup corrections, removal of 'onclick,' and
conversion of some links to styled buttons.
To test, apply the patch and go to Tools -> Upload.
- Confirm that uploading a file works correctly.
- Confirm that clicking 'Cancel' during a file upload works correctly.
- Search existing uploads.
- Confirm that the 'Download' and 'Delete' buttons look correct and
work correctly.
- In Administration -> MARC bibliographic framework, choose a
framework and configure a tag subfield to use the upload plugin.
- Create or edit a bibliographic record using the framework you
modified.
- Click the tag editor icon next to your modified subfield to trigger
the pop-up window with the upload form.
- Confirm that this window has a layout which is adjusted for the size
of the window.
- Confirm that uploading and selecting files from this window works
correctly.
Jonathan Druart [Wed, 4 May 2016 18:53:46 +0000 (19:53 +0100)]
Bug 16442: Make C4::Ris plack safe
C4::Ris incorrectly uses 4 package variables:
- $utf: not used, can be removed
- $intype: set to marcflavour once, but later it assumes that it is
usmarc if not defined
- $marcprint: always 0, so set it to 0
- $protoyear: only used in 1 subroutine, let's define it at this
level
Test plan:
Just make sure the RIS export works as before this patch
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Claire Gravely [Fri, 3 Jun 2016 08:38:25 +0000 (10:38 +0200)]
Bug 16642 - Fix capitalisation for upload patron image
To fix capitalisation on the staff interface when patronimages is turned on.
Test plan:
1. In staff interface. Turn on patronimages sys preference.
2. Go to a patron without an image and check that the "Upload
patron image" box heading now has correct capitalisation.
3. Go to a patron with an image already uploaded and check the
"Manage patron image" box heading has correct capitalisation.
Signed-off-by: Sofia <szapoun@lib.auth.gr> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 23 May 2016 11:19:46 +0000 (12:19 +0100)]
Bug 16565: Drop additional_fields and additional_field_values before creating them
These 2 tables should be dropped before trying to create them
Test plan:
From the SQL CLI, source the kohastructure.sql file
source it again
=> Without this patch you get 2 warnings
ERROR 1050 (42S01) at line 3580 in file:
'installer/data/mysql/kohastructure.sql': Table
'additional_fields' already exi
sts
ERROR 1050 (42S01) at line 3596 in file:
'installer/data/mysql/kohastructure.sql': Table
'additional_field_values' alrea
dy exists
=> With this patch, you won't get them
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Marc Véron [Fri, 20 May 2016 09:01:18 +0000 (11:01 +0200)]
Bug 9543 - (Follow-up) Show patrons messaging subscription on holds notification
As of comment #19
- Code de-duplicated to a BLOCK statement
- Variable renamed
- Wording slightly changed. I like it that way, but feel free to change it
in a follow-up
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Marc Véron [Thu, 24 Mar 2016 15:06:30 +0000 (16:06 +0100)]
Bug 9543 - Show patrons messaging subscription on holds notification
Display an information about a patron's messaging preferences if an item
is checked in where the patron has put a hold.
To test:
- Apply patch
- Make sure that SMS driver and TalkingTech sysprefs are defined to
enable SMS and Phone preferences for users (SMS driver can be a dummy
value)
- Place a hold for a patron
- Set patron's messaging preferences to different choices (including none)
- Check in the item that is on hold (it has not to be checked out for the
test
- Verify that below the message "Hold found (item is already waiting") an
information appears about the patron's messaging preferences.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Chris Kirby <christopherlawrencekirby@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Aleisha [Thu, 12 May 2016 04:41:09 +0000 (04:41 +0000)]
Bug 12402: Show patron category on pending patron modifications
To test:
1) Go to OPAC and make a modification to user
2) Go to Staff Client and go to pending patron modifications
3) Notice that we have the user's surname, first name, branch and
cardnumber
4) Apply patch and refresh page
5) Notice that patron category now shows after user's name
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Thu, 19 May 2016 16:28:08 +0000 (12:28 -0400)]
Bug 16005 - Standardize use of icons for delete and cancel operations
This patch makes changes to Font Awesome icons in order to make icon
choice consistent for common actions.
<i class="fa fa-trash"></i> where something is deleted, removed, or
emptied.
<i class="fa fa-remove"></i> where an operation is cancelled (also where
selections are cancelled, as in checkboxes).
<i class="fa fa-times-circle"></i> for "close," as in baskets and
windows.
To test, apply the patch and view the following pages to confirm that
the correct icon is used:
- Acquisitions -> Vendor -> Vendor delete button.
- Acquisitions -> Vendor -> Edit -> Delete contact button.
- Acquisitions -> Invoices -> Delete menu item.
- Cataloging -> Edit record -> Authority search pop-up (triggered from
the tag editor for a tag linked to an authority) -> Clear field button
- Authorities -> Authority detail -> Delete button.
- Tools -> Quotes editor -> Quotes delete button.
- Reports -> View saved report -> Delete button.
- Reports -> Saved reports -> Delete menu item.
- Serials -> Subscription details -> Subscription close button.
- Administration -> Budgets -> Delete menu item.
- Administration -> Item search fields -> Delete button.
- Administration -> Z39.50/SRU servers -> Delete menu item.
- Catalog -> Advanced search -> Clear fields link.
- Cataloging -> Advanced editor -> Macros -> Delete macro button.
- Circulation -> Checkout -> Check out an item which is on hold for
another patron. "Cancel checkout and place hold" button now uses the
icon used elsewhere for holds.
- Course reserves -> Course -> Delete course button.
- Patrons -> Patron lists -> Add patrons -> Remove selected button.
- Acquisitions -> Suggestions -> Suggestion details -> Delete button.
- Lists -> List contents -> Remove selected button.
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Mon, 25 Apr 2016 13:12:05 +0000 (09:12 -0400)]
Bug 16336 [Revised] UX of holds patron search with long lists of results
Bug 15793 made a change to an interface which is also found in the place
hold template. This patch creates a new include file to be used by both
circulation.tt and request.tt so that these pages do not diverge.
In the process, this patch removes some markup and JavaScript which was
made obsolete by Bug 15793 and should have been removed.
This patch also revises the sorting of the results table so that the
patron name is sortable (Bug 16334) and the default sort is on card
number (matching 3.20.x and 3.22.x).
To test:
In Circulation:
- Perform a search by name for a patron which will
return multiple search results.
- The table of results which displays should look correct and work
correctly, including DataTables sorting.
- Clicking any table row should forward you to the checkout page for
that patron.
In the catalog:
- Locate and place a hold on a title.
- When prompted to select a patron to place the hold for, perform a
search by name which will return multiple results.
- Confirm that the table of patron results looks correct and works
correctly.
- Clicking any table row should forward you to the place hold page for
that patron and the title you selected.
Revision: Although the table row was clickable, you couldn't
middle-click it to open the link in a new tab. The patron name is now a
real link you can middle-click or right-click. The row is still
clickable as well.
projects / koha.git / log