Bug 11673: columns.def has swapped last and first name of alt contact
To test:
- Create a new guided circulation report
- On the field list scroll to "Alternate contact: Last name"
=> FAIL:
"Alternate contact: Last name" relates to borrowers.altcontactfirstname
"Alternate contact: First name" relates to borrowers.altcontactsurname
- Apply the patch, restart the creation of the report
=> SUCCESS:
"Alternate contact: First name" relates to borrowers.altcontactfirstname
"Alternate contact: Surname" relates to borrowers.altcontactsurname
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Patch behaves as expected Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 27 May 2014 13:25:02 +0000 (09:25 -0400)]
Bug 4045 - No check for maximum number of allowed holds.
Re-add the system preference maxreserves.
All the code using maxreserves is still in place. Though it
is not used in the Reserves module, it is used in all the
scripts where holds are placed.
Also adds a check so that a borrower cannot exceed the maximum
number of allowed holds by using the multi-hold feature via
the opac.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Set maxreserves to 3, set opactheme to bootstrap
4) Log into the opac as a patron
5) Place 3 holds
6) Attempt to place a 4th hold
7) Note you get an error message and cannot place a forth hold
8) Delete two of those holds
9) Attempt to place 3 or more holds as a multi-hold
10) You should see a warning that you cannot place this many holds
11) Try to anyway
12) You should see an alert to tell you to reduce the number of holds
you are placing.
13) Reduce the number for holds you are placing to 2
14) Your holds should now be placed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 21 Jul 2014 10:25:21 +0000 (12:25 +0200)]
Bug 12699 - Capitalization: All Libraries in pull down on news tool page
To test, got to tools > news
- In pulldown and in table, "All Libraries" should now read "All libraries"
- Create additonal news for "All libraries". Pull down in form should read "All libraries" as well
- Make sure that news for "All libraries" diesplay correctly where they should (in OPAC and Staff client)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 29 Jul 2014 19:08:33 +0000 (15:08 -0400)]
Bug 12635 - Course reserves item list should use "Checked out" instead of "On Loan"
When viewing the list of items on a course reserve list, if the item is
checked out it is indicated by the phrase "On Loan." The default
templates should always use "checked out" instead of "on loan." Also
corrected: the capitalization of "Item Lost."
To test, Course Reserves must be enabled and you must have an existing
course reserves with items on it, one of which should be checked out.
View the list of items on that Course Reserve and confirm that the table
says "Checked out."
Table in staff client displays "Checked out" / "Item lost" Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12686: Make more selected option XHTML compliant
This patch fixes several occurrences of selected
options that do not follow XHTML style rule for
markup.
To test:
1. Apply the patch
2. There are no functional changes at all,
only a more strict markup
Changed all cases I can found.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Evonne Cheung [Fri, 21 Nov 2014 01:10:08 +0000 (14:10 +1300)]
Bug 10220 IDs on checkin columns
Test: go to Circulation > Check in, table has ID and each column has a
class.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a class to every th and td element in the check-in table.
Works as describe, no regressions found.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Replace some tab with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 28 Jul 2014 16:11:33 +0000 (12:11 -0400)]
Bug 12597 - Give better visual indication of currently-selected language in the staff client
There is currently no visual feedback to the user reflecting which of
multiple installed translations is currently selected. I think some
necessary styling didn't make it into the conversion to Bootstrap menus.
This patch attempts to improve things.
Most of the changes are to bring back the previous style of highlighting
the currently selected language. A new change is the addition of the
sub-language code to the display of the menu label if one of that menu
item's sub-languages is selected.
This patch also removes some obsolete CSS which referred to the old menu
system.
To test, apply the patch and install or update multiple languages,
including at least two sub-languages. In my test I used en, en-GB and
de-DE. Clear your browser cache if necessary. Enable all these languages
and test the functionality of the language selection menu in the footer.
- Non-enabled languages should appear as non-bold links.
- When a single language (with no sub-languages) is enabled it should
appear as bold text.
- When one of multiple sub-languages is enabled that selection in the
pop-up menu should appear as bold text. The menu label should show in
bold the language code of the selected sub-language.
Tested with de-DE and de-CH, works as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests. No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 15 Jul 2014 19:35:54 +0000 (15:35 -0400)]
Bug 8521 - Error in warning message when deleting list
When deleting a list the operation is blocked if there are items still
on the list, and the interface shows a warning which includes a count of
the items on the list. This count is broken for lists containing more
items than the number specified in the numSearchResults system
preference.
This patch corrects the item count to use an actual count of the total
number of results, not the total number of results in the first page of
results.
The template change to the staff client copies some language logic from
the OPAC template for dealing with a single number of list entries.
Test in both the OPAC and the staff client.
Check the number specified in the numSearchResults system preference and
locate or create a list containing more than that number of items. Try
to delete the list. You should receive a warning message stating the
correct total number of items on the list.
Test also with a list which contains fewer than numSearchResults
entries, and a list which contains zero entries.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested Public and Private lists with 0, 5 & 25 entries, Public with 40 and Private with 45. Working as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Tue, 22 Jul 2014 15:57:01 +0000 (17:57 +0200)]
Bug 12619 - Shipment date gets lost on finishing and/or editing the invoice
To reproduce:
- Create a new shipment, make sure to add a shipment date
- Receive or not receive orders
- Finish receiving with the button at the bottom of the page
- Verify that shipment date is now empty
To test:
- reproduce the aforementioned issue
- apply patch
- confirm that the issue is no longer rerpoductible (= shipment date is
not getting lost any longer), and that there are no apparent regresssions
of any kind involving invoice shipment date entering and/or editing
- sign off
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, fixes the issues, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brendon Ford [Fri, 13 Jun 2014 00:28:28 +0000 (20:28 -0400)]
Bug 12407: phone label or data switched
Fix for switched phone numbers on patron details page.
This patch fixes switched phone numbers on patron details page and also makes phone number labels more uniform.
To Test:
1. Apply the patch.
2. Create/modify a patron entering some unique data into the "Secondary phone:" and "Other phone:" fields (different data for each).
3. Save the patron record.
4. Go to the patrons details page and make sure the data entered into the "Secondary phone:" field is displaying next to the "Secondary phone:" label and that the data entered into the "Other phone:" field is displaying next to the "Other phone:" label.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11331 - CSV export for viewlog.pl is missing newlines - followup
Perl formatting and cleaning.
Also corrects the HTML of results table in viewlog.tt.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11331 - CSV export for viewlog.pl is missing newlines
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brian Norris [Fri, 25 Jul 2014 02:55:04 +0000 (14:55 +1200)]
Bug 12660:Correct mispelling of accomodate in comments
View the file in your git checkout to see the misspelling of accomodate
do the patch
view the files again to see the correct spelling accommodate
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes typos to correct spelling.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10648 - In records merge greatest field can not be added
When merging 2 records (/cgi-bin/koha/cataloguing/merge.pl), the destination record is build using the fields and subfields checked in source records.
When a field is checked, the javascript code searches in destination record a field with a greater tag number to insert new field before.
When the new field tag number is greater than all existing field tag numbers, the field is not added.
This patch corrects this by adding at end if no greater field tag number exists. Also adds a sort of fields by tag number because all mergo code is based on this.
Test plan :
- Add to a framework a repeatable field with the greater non existing tag number. For example 998.
- Edit 2 records with this framework and add them a value in this tag.
- Put those records is a list
- Go to this list and check the two records
- Click on "Merge selected"
- Click on next
- Go to second source record
- Click on the greatest tag number. for example 998.
=> The field is added at the end of destination record
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, no regressions.
Owen Leonard [Wed, 16 Jul 2014 19:32:08 +0000 (15:32 -0400)]
Bug 4013 [Revised] road type missing on search results
On the patron search results page there are several patron fields which
do not show: street number, road type, and state. This patch adds them.
To test, go to Patrons -> Search patrons and perform a search. In the
table of patron search results each patron record should display the
correct information including street number, road type, and state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
David Cook [Fri, 1 Aug 2014 06:42:34 +0000 (16:42 +1000)]
Bug 12690 - opacuserjs gets loaded twice in self checkout
This patch removes a second instance of "opacuserjs" in the opac
self-checkout.
_TEST PLAN_
1) Enable OPAC Self-checkout in the system preferences
2) Type the following code into your "opacuserjs" system preference:
alert("This is a test");
2) Visit /cgi-bin/koha/sco/sco-main.pl
3) Note that you get a pop-up saying "This is a test" twice.
4) Apply the patch
5) Refresh /cgi-bin/koha/sco/sco-main.pl
6) Note that you now only get a pop-up saying "This is a test" once.
Followed test plan, patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
opac-bottom.inc already adds opacuserjs, so the additional line
in this template can be removed.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12673: Remove CGI::scrolling_list from C4::Items.pm
This patch removes only instance in this file
To test:
1. Apply the patch
2. (Esay way) Put on staff URL
/cgi-bin/koha/services/itemrecorddisplay.pl?biblionumber=N&itemnumber=M
3. Code replaced corresponds to pulldowns, verify information
is correct (check with another item edit view)
PrepareItemrecordDisplay() in Items.pm is filled with chunks of
HTML code that must be put on TT file. For now scrolling_list
is the only removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested different item edit displays and the URL given above,
no regressions found. Also passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
to test:
1. Apply the patch
2. Run the test, prove t/db_dependent/Koha.t
3. Check that it pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12675: Remove CGI::scrolling_list from labeledMARCdetail.pl
This patch removes only instance in this file.
Also updates getframework POD on C4/Koha.pm,
adds new GetFrameworksLoop() func on same file from
suggested code, but with ordered result.
To test:
1. Apply the patch
2. Enable viewLabeledMARC syspref
3. On staff, search for a record, goto detail view
4. Clic on Labeled MARC
5. Framework pulldown was replaced, check changing
framework.
A bug was fixed, because selecting any fw and then Default
tries to load values from 'Default' fw code, which does not
exists.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 28 Jul 2014 15:35:47 +0000 (11:35 -0400)]
Bug 12677: Use Bootstrap "label" style for inline OPAC renewal messages
This patch revises the styling of the renewal success message to use a
default Bootstrap style more suited to inline messages. I think this is
preferable to using the alert style because the alert is designed to be
a block-level element.
Because Koha's CSS already uses a "label" class for something else I
duplicate the Bootstrap "label" class in opac.css as "blabel." The
Bootstrap color definitions are included.
To test, follow the test plan already provided:
1) Apply this patch
2) From the OPAC, renew some items
3) Note the "Renewed!" message in the "Renew" column of the checkouts
table
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12668 - Stray dollar ($) -sign in opac-reserve.pl
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a missing help file for the staff search history page.
To test:
* Turn on EnableSearchHistory
* Do a search in the catalog
* Click your username in the top right and choose 'search history'
* Click 'help' in the top right
* Confirm that help file is there
* note: link to manual won't work until after 2014-08-01 in the USA
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When doing aquisitions and ordering from external z3950 targes, the item price is not inferred from the MARC record when the NORMARC framework is set.
This patch makes GetMarcPrice treat NORMARC the same as MARC21.
Test plan
* Setup Koha with NORMARC framework
* Add a norwegian z3950 search target (ex: z3950.bibsys.no:2100, database=BIBSYS)
* Create a new basket, and add order to basket from external source
* Search for a tile (ex: ISBN 8205341834) from the bibsys z3950 server
* Click to order the title
* Observe that vendor price is not set
* Apply patch, repeat search for same book
* Order, and observe the vendor price is filled in from the MARC record
http://bugs.koha-community.org/show_bug.cgi?id=12554 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No errors.
Tested changing marcflavour syspref to NORMARC,
and following test plan, bug exist and is fixed.
Changed bug description on patch, too long :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch adds a check for NORMARC to provide the same functionality
as for MARC21. No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12687 - Remove CGI::scrolling_list from circulation.pl
This patch removes the only instance in this file
To test:
1. Apply the patch
2. Search for patrons on staff CheckOut,
use a string that gives multiple results
3. Results are displayed on a select,
that was replaced.
4. Check for regressions: select a patron and press 'Select',
or do double click on a patron name, verify you go
to patron's checkout tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Tue, 10 Jun 2014 10:47:37 +0000 (12:47 +0200)]
Bug 12398: Fix CAS authentication validation
CGI::url_param() also returns deleted parameters so we have to check
with CGI::param() too.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Took a while to get it working, but I can confirm CAS login is not
working without this patch, but does with it.
Some notes:
In order for this to work you have to add http:// in front of your
OpacBaseURL.
You will also need a CAS test server and install the certificate
on your system.
Tested with CAS test server provided by Biblibre.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sat, 3 May 2014 09:53:33 +0000 (11:53 +0200)]
Bug 12174 follow-up of the patch (a missing print statement)
http://bugs.koha-community.org/show_bug.cgi?id=12174 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sat, 3 May 2014 09:09:25 +0000 (11:09 +0200)]
Bug 12174 - Zotero connection with Koha: problem with UTF-8
This patch solves the bug for UTF-8 output. MARC-8 works only if you save it as a file. In fact the standard Internet stack (browser, web server, etc.) doesn't know anything about MARC-8 or it's ISO base (ISO 2022).
To test the bug:
-- without the patch use Zotero on a recent Koha install with Apache.
You can use PTFS sandboxes. You can't use Biblibre sandboxes, they use Ngix.
-- Test a record with special chars.
-- Install the patch
-- Catch (using Zotero) the same record.
-- Test all directly download from Opac.
-- To check MARC-8, use a tool that support it. For example MarcEdit.
http://bugs.koha-community.org/show_bug.cgi?id=12174 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Tested with zotero add-on for firefox.
Before patch bad diacritics, after patch ok
Record exported as MARC-8, transformed using
yaz-iconv -f marc8 -t utf-8 bib.marc8 > bib.utf8
yaz-marcdump -i marc -o line bib.utf8, checking accents,
also comparing with direct utf-8 export
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with Zotero in Firefox and with yaz-iconv as suggested by
Bernardo, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 25 Jul 2014 11:53:40 +0000 (07:53 -0400)]
Bug 12568 [QA Followup] - Use ':' as separator instead of '|'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 14 Jul 2014 12:34:40 +0000 (08:34 -0400)]
Bug 12568 - Improve visibility of successful renewal via opac
Currently, when a patron renews an item via the opac, the only feedback
the patron receives when a renewal is successful is an updated value for
the due date of the item. This subtle indication of success may go
unnoticed by some patrons. We should add a more prominent way to
indicate an item was renewed successfully.
Test Plan:
1) Apply this patch
2) From the OPAC, renew some items
3) Note the "Renewed!" message in the "Renew" column of the checkouts table
Signed-off-by: Cathi Wiggins <cwiggins@ci.arcadia.ca.us> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Makes successful renewals more visible to the user in the OPAC.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 25 Jul 2014 10:43:08 +0000 (12:43 +0200)]
Bug 12662: (follow-up) Ajax-based check in does not work for some system preference settings enabled
ModItem is needed too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Fri, 25 Jul 2014 08:56:52 +0000 (10:56 +0200)]
Bug 12662: Ajax-based check in does not work for some system preference settings enabled
To reproduce:
- enable "InProcessingToShelvingCart" or "ReturnToShelvingCart"
system preference,
- for a sample patron with 1+ checkouts, try to check in some item[s]
using checkboxes in the "Check in" column in the checkouts table
which is displayed in the "Check out" or "Details" patron account tabs,
- observe that clicking "Renew or return checked items" button only
results in ajax "spinning wheel" stuck in infinite loop; check-in
operation is not performed.
To test:
- follow the steps above to reproduce this bug
- apply patch
- redo the test; ensure that this issue is no longer reproductible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 13:13:34 +0000 (09:13 -0400)]
Bug 7462 - duplicate patron shows flags
When duplicating a patron the form fields for setting patron account
flags and restrictions should be hidden as it is when adding a patron.
This patch adds the correct logic to the template.
To test, duplicate an existing patron:
- Confirm that the "Patron account flags" and "Patron restrictions"
sections are not visible.
- Confirm that saving a duplicated patron works correctly.
- Confirm that the edit and new patron entry forms are unaffected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, all three points confirmed
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small template change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 15 Jul 2014 08:28:14 +0000 (10:28 +0200)]
Bug 10155: Patron search should remember search type options selected
The search type reset to the default.
Test plan:
1/ go on the patrons home page
2/ Launch a search in the header and select the second value for "search
type" ("contains").
3/ Verify the search type is set to "contains" on the results page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 18 Jul 2014 16:22:58 +0000 (12:22 -0400)]
Bug 7237 - duplicating patron not using patron's branch
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Sat, 7 Jun 2014 15:18:13 +0000 (11:18 -0400)]
Bug 11905 - when editing item, cursor is positioning in search box and not to item
cataloging-search.inc had embedded js to set focus into the search box.
This patch removes that js from the cataloging-search.inc and adds it into
addbooks.tt and merge.tt to set focus on those pages and allow focus to be set
to the edit items form on additem.tt
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Juhani Seppälä [Thu, 17 Jul 2014 08:45:06 +0000 (11:45 +0300)]
Bug 11888: Random password suggestion does not work twice
This patch adds a simple ajax-call to pull a new suggested password
from the same perl script.
To test:
1) Search for a patron and select "Change password" from the moremember-view.
2) In the member-password-view, click on "Click to fill with a randomly generated suggestion".
3) Confirm that you get a new suggested password and click the same link again.
4) Note that you do not get another suggested password - nothing is happening.
5) Apply patch.
6) Repeat steps 1-3 and confirm that you can keep clicking for a new suggested password.
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Works as desribed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Thu, 24 Jul 2014 16:12:42 +0000 (17:12 +0100)]
Bug 12654 Correct incorrectly quoted regexp
A compile time warning was being generated because \ does not quote
{ Replace the plethora of \ before meta and presumed meta characters
by \Q \E which gets perl to generate all the necessary escapes, we can
assume it knows its regex engine as well or better than the human
programmer
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified change reading the perldoc and also checked that
./misc/link_bibs_to_authorities.pl is no longer showing
the warn and still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, running:
prove t/db_dependent/AuthoritiesMarc.t
doesn't show the warning anymore.
Bug 12661: Fixing capitalisation from "Item Type" to "Item type"
To fix go to help>reports>manager
Find capitalisation error
"Item Type"
Change to
"Item type"
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 18:21:28 +0000 (14:21 -0400)]
Bug 9221 - contact note not showing
The contents of the contact note field are not displayed on the patron
detail page in the staff client. This patch corrects this.
This patch also corrects the case of the "Contact note" label in the
OPAC patron details form (Log in -> Your personal details).
To test, apply the patch and edit a patron to add data to the contact
note field. Save and view the detail page for that patron. The contents
of the contact note field should appear under the alternate address
data.
In the OPAC the contact note field label should have correct
capitalization.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12615: Remove CGI::scrolling_list from marc_subfields_structure.pl
This patch removes all instances on this file.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 020
5. Clic 'Edit subfields' button
Now the tests proper
6. On any subfield, check pulldown
'Managed in tab', was replaced, so test
if it works and search for regressions
Change, save, load, change again
7. Clic on 'Advanced constraints'
(2) scrolling list removed
At the bottom, check 'Koha link', was changed
Check assign/remove/save/load values, search for regressions
8. Clic on 'Other options' box
Eight(6) scrolling_list removed, they use to
feed three pulldowns, so check each one
'Authorised value',
'Thesaurus'
'Plugin'
Check assign/remove/save/load values, search for regressions
Check adding a new subfield
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Mon, 30 Jun 2014 12:42:27 +0000 (14:42 +0200)]
Bug 12487: SQLHelper replacement - C4::Contract
With this patch, the subroutines GetContract, GetContracts, AddContract, ModContract and DelContract uses DBIx::Class instead of C4::SQLHelper
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t
3) The command has to be a success :
t/db_dependent/Contract.t .. ok
All tests successful.
Files=1, Tests=43, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.49 cusr 0.05 csys = 1.59 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct, then cancel
17) Click on "Delete this basket"
18) Click on "Contracts" (in the left menu) in order to go on aqcontract.pl, then "Delete" the created contract
19) The contract is not displayed anymore in the vendor page
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Tested on top of Bug 12493
Tests pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Fri, 27 Jun 2014 14:00:50 +0000 (16:00 +0200)]
Bug 12493: moving the subroutines GetContract and GetContracts from C4::Acquisition.pm to C4::Contract.pm
This patch includes:
- the subroutines GetContract and GetContracts has been moved from C4::Acquisition.pm to C4::Contract.pm and adapted for a general use
- adaptation of acqui/basket.pl, acqui/basketheader.pl, acqui/neworderempty.pl, acqui/supplier.pl and admin/aqcontract.pl
- the unit tests for the module C4::Contract.pm
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t t/Acquisition/ t/db_dependent/Acquisition/ t/db_dependent/Acquisition.t
3) The command has to be a success :
t/db_dependent/Contract.t ................................. ok
t/Acquisition/CanUserManageBasket.t ....................... ok
t/Acquisition/Invoice.t ................................... ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Acquisition.t .............................. ok
All tests successful.
Files=10, Tests=284, 15 wallclock secs ( 0.11 usr 0.02 sys + 12.88 cusr 0.77 csys = 13.78 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with both patches applied.
Works as described following test plan, all points (I did 14 first)
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Mon, 23 Jun 2014 14:00:58 +0000 (16:00 +0200)]
Bug 12457: Adding unit tests for Members.pm
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Fri, 20 Jun 2014 12:31:53 +0000 (14:31 +0200)]
Bug 12457: Removal warning in t/db_dependent/Members.t
When I execute prove t/db_dependent/Members.t, this warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
The warning is due to a invalid use of the routine set_userenv
Test plan:
1/ Execute : prove t/db_dependent/Members.t
2/ The warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
3/ Apply the patch
4/ Execute : prove t/db_dependent/Members.t
5/ The result has to be a success without error or warning :
t/db_dependent/Members.t .. ok
All tests successful.
Files=1, Tests=26, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.50 cusr 0.08 csys = 1.63 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All new and old tests pass now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:12:08 +0000 (10:12 -0400)]
Bug 9000 [4] - Update to GPL v3
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:10:08 +0000 (10:10 -0400)]
Bug 9000 [3] - Change conf key from tmpl to template
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:06:28 +0000 (10:06 -0400)]
Bug 9000 [2] - Update included examples
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:07:45 +0000 (10:07 -0400)]
Bug 9000 [1] - Update rss.pl to use Template Toolkit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using script with sample conf files
RSS feeds generated are 'well formed' xml
Some koha-qa errors fixed in followup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, even more now than before.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Thu, 19 Jun 2014 14:32:05 +0000 (16:32 +0200)]
Bug 12445: ading unit tests to test the routines : CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion, GetSuggestionByStatus
These routines were not tested
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=89, 1 wallclock secs ( 0.05 usr 0.01 sys + 1.52 cusr 0.08 csys = 1.66 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no koha-qa errors
But now there are 91!
prove t/db_dependent/Suggestions.t
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.00 sys + 1.77 cusr 0.10 csys = 1.92 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Thu, 19 Jun 2014 07:14:24 +0000 (09:14 +0200)]
Bug 12445: Improving unit tests for C4::Suggestions.pm
Now, the tests used 'is' instead of 'ok', the tests are wrapped in a transaction, adding tests for the routines NewSuggestion, GetSuggestion, ModSuggestion, GetSuggestionFromBiblionumber and GetInfoFromBiblionumber.
The tests for the routines DelSuggestionsOlderThan, CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion and GetSuggestionByStatus will be arrived in another patch.
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without warning or error :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=32, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.49 cusr 0.08 csys = 1.61 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brian Norris [Fri, 25 Jul 2014 02:16:12 +0000 (14:16 +1200)]
Bug 12562: fix capitalisation of Save Report button
Test:
go to reports and then create report from SQL
the Save button has wrong capitalisaion of Report
add patch
refresh
should see button being Saved report
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Brian, don't forget to assign the bug to yourself and set patch complexity :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Evonne Cheung [Thu, 20 Nov 2014 23:59:48 +0000 (12:59 +1300)]
Bug 12563: capitalisation on detail pages item's tab
Test: go to a record in the catalog, go to detail page, switch to 'items'
tab, look for the 2 'Set status' buttons, check capitalisation should be
lower case for second word.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no koha-qa errors
Evonne, assign the patch to yourself :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Karl Menzies [Fri, 25 Jul 2014 02:27:32 +0000 (14:27 +1200)]
Bug 12564: Fixing capitalisation buttons in inventory tool
To Test
1/ Do a search in the inventory tool - view capitalisation errors in lower Buttons
2/ Apply patch
3/ Redo search in the inventory tool
4/ Confirm capitalisation errors are fixed
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Fixed capitalization (and typo) on patch bug description :)
Karl, don't forget to assign the bug to yourself :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12612: Remove CGI::scrolling_list from auth_tag_structure.pl
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC authority editor)
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12613: Remove CGI::scrolling_list from koha2marclinks.pl
This patch removes all (2) instances from koha2marclinks.pl.
Also changes dropdowns width on mapping editor, from an
ugly ragged right to a fixed width view.
To test:
1. Apply the patch
2. Go to Administration > Koha to MARC mapping
3. Pulldown in this view has been replaced, check
for regressions: change table type and press Ok,
verify you get Koha fields and tag/subfield appropriate
for each table.
4. Now press 'Edit' on any field, go into mapping editor
5. Check that all pulldowns show tag/subtags relevant
for each group ( 000s ... 900s )
6. Check that current mapping is displayed correctly
7. Check for regressions: unmap, remap, press Ok,
verify, change again.
8. If you can, check display of mapping editor on several
browsers, just in case.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I have tested with Firefox/Iceweasel only.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested in Chromium.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12614: Remove CGI::scrolling_list from auth_subfields_structure.pl
This patch removes all instances on this file. Even removes some commented out instances.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 031
5. Clic 'Edit subfields' button
Now the tests proper
6. 'Help input' box (editor bottom):
Eight(8) scrolling_list removed, they use to
feed the four pulldowns, so check each one
'Koha field' is new (for me at last)
'Authorised value',
'Thesaurus' (is this valid/useful here?)
'Plugin'
There is a difference between existing subtags and a new subtag,
the 'id' of the pulldowns (so the 8 scrolling list removed)
Check assign/remove/save/load values, search for regressions
If you edit subtag 942, it has a value on kohafield (default fw)
I think that this box could be prettified with fixed width for
pulldowns.
7. No more functional tests, there are 4 scrolling_list removed
that are commented (removed also commented code on tt file),
and two instances that are similar to previously removed
instances, evidently with no effect.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Not sure about the new Koha field entry... All works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All works as expected.
About Koha field: I think it makes sense to have it in the form,
so you can configure the fields for new authority types.
In my database I have mappings on authtypecode and authid.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 22 Jul 2014 10:15:35 +0000 (12:15 +0200)]
Bug 12622: Fix export report as ods
Bug 11679 introduces an ods export for reports.
It looks quite buggy:
1/ You get a Perl error if the report has no results
2/ The ods file contains 1 lines less than the total results.
Test plan:
After applying this patch, try to export a report which has no results
and verify you get an ods file with headers only.
Try to export a report which has a least 1 result and verify the
generated ods has the right number of lines.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the reported problem, passes all tests and QA script.
Added the sign-off line for Robert.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mathieu Saby [Sun, 10 Nov 2013 15:12:31 +0000 (16:12 +0100)]
Bug 11230 - Refactor C4::Stats::UpdateStats and add UT
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sophie Meynieux [Tue, 20 May 2014 15:35:00 +0000 (17:35 +0200)]
Bug 12294 : Cancel replacing carriage return on notices
Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should reserve the use of dirs for namespaces. Method specific tests
should be included in a single file with subtests, or stick to Package_method.t.
This should be discussed, so we rearrange the remaining tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 12:07:33 +0000 (14:07 +0200)]
Bug 12583: DelItem prototype - Add unit tests
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 11:44:39 +0000 (13:44 +0200)]
Bug 12583: DelItem prototype - prefer hashref
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 11:39:07 +0000 (13:39 +0200)]
Bug 12583: DelItem prototype - Remove $dbh
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 14 Jul 2014 13:05:05 +0000 (09:05 -0400)]
Bug 9667 - Inventory scrolling to top with every click
An "onclick" attribute on inventory results links causes the page to
scroll to the top each time. This patch updates the click handling to
use a progressive-enhancement method.
Unrelated changes: I added use of the Branches T:T plugin to output
library name instead of branchcode, and put a check around call number
to prevent output of empty [] in results.
To test, use the inventory tool to check a batch of items. On the
results page:
- Confirm that branch name is shown instead of code.
- Confirm that no [] shows for items without call numbers
- Confirm that clicking a title opens a pop-up window showing details
for that title.
- Confirm that clicking a title opens a pop-up window whether you're on
the first page of results or any subsequent page.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested in Firefox and Chromium.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 23 Jul 2014 17:08:36 +0000 (13:08 -0400)]
Bug 12639 - Z39.50 administration page should use "message" dialog for adds and updates
This patch changes the style of a couple of message boxes to use the
"message" style instead of the "alert" style. This better reflects the
type and priority of the messages being displayed.
To test, got to Administration -> Z39.50 client targets and edit an
existing server. The confirmation message should be the blue "message"
type.
Test again by adding a new server. The confirmation message for this
operation should be of the same blue "message" type.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, tested ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 14 Jul 2014 14:32:11 +0000 (10:32 -0400)]
Bug 12572 - Use jQueryUI Accordion to display message transport types
The notice edit view has separate sections for each of the various
message transport types. This patch groups them in a jQueryUI accordion
to simplify the view.
Also changed: Some label/id pairs have been changed to eliminate
duplicate ids.
To test, apply the patch an edit any notice under Tools -> Notices &
Slips.
- The message transport type fields for email, feed, phone, etc. should
be correctly grouped in a collapsed accordion. The acccordion should
look correct and work correctly.
- Clicking the label for any form field should correctly highlight the
corresponding field.
- Submitting updates to the notice should work correctly for all message
transport types.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described.
Something small: the top border of the uncollapsed/opened section
doesn't display correctly, but this is working a lot nicer than before,
as now changing a message requires a lot less scrolling.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 17 Jul 2014 14:57:06 +0000 (10:57 -0400)]
Bug 12596 - Backdating returns with SpecifiyReturnDate causes fines for items not overdue!
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 17 Jul 2014 16:17:48 +0000 (12:17 -0400)]
Bug 12596 - Unit Test
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12164: (followup) keys expects a hash parameter
As of http://perldoc.perl.org/functions/keys.html we should avoid passing
a scalar parameter as it is not backwards compatible with squeezze's Perl
version (5.10).
Cite:
"Starting with Perl 5.14, keys can take a scalar EXPR, which must contain a
reference to an unblessed hash or array. The argument will be dereferenced
automatically. This aspect of keys is considered highly experimental. The
exact behaviour may change in a future version of Perl."
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 30 Jun 2014 10:05:46 +0000 (12:05 +0200)]
Bug 12164: Fix decimal number display
If the funds are not moved, the amount is display like 123.000000.
This patch hardcodes the number of decimal numbers to display (2).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, especially all acquisition tests.
New routines in Budgets.pm:
- CloneBudgetPeriod
- CloneBudgetHierarchy
- MoveOrders
OK t/db_dependent/Budgets.t
Some of the tests done:
1) Duplicate an existing budget
- OK Existing budget is active, duplicate it and mark it inactive
- OK Existing budget is inactive, duplicate and mark it inactive
2) Close budget
- OK Budget was created without funds - no changes are made
- OK Budget was created with funds, all orders moved correctly
- moving the available money to the new budget is optional
- OK Budget was created with funds, but one fund deleted,
all orders moved correctly, one missing fund reported,
orders unchanged
3) Partial receiced undone
- OK Partial receive from last budget is undone, order lines
are correctly recombined and fund is set to the current budget
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log