Jonathan Druart [Tue, 14 Jan 2014 11:06:34 +0000 (12:06 +0100)]
Bug 11549: make it possible to receive and cancel the receipt of a transferred order
To reproduce the issue:
- transfer an order from a basket to another. Note the previous
ordernumber (X) and the new one (Y).
- receive the order
- cancel the receipt
- verify the order has been deleted:
select count(*) from aqorders where ordernumber=Y;
select * from aqorders_transfers where ordernumber_from = X;
The value for ordernumber_to is null.
To test this patch:
- apply this patch
- transfer an order from a basket to another
- receive the order
- cancel the receipt
- verify the order still exist in the basket where the transfer has been
done.
Jonathan Druart [Fri, 25 Oct 2013 14:35:44 +0000 (16:35 +0200)]
Bug 11141: retain pending order filters during receiving.
On receiving orders, the librarian has to filter again the pending
orders list.
This patch stores the filters in a cookie in order to apply them when
the librarian finish a receive and come back on the pending orders list.
Test plan:
1/ choose a vendor with several baskets and orders.
2/ start to receive an item.
3/ on the pending orders page, add some relevant filters.
4/ receive an item.
5/ you are back on the pending orders page and filters are directly
applied.
Signed-off-by: Nicolas Bravais <nicolas.bravais@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested with receiving and cancelling the receive process the
filters are kept.
Jonathan Druart [Wed, 27 Nov 2013 15:35:54 +0000 (16:35 +0100)]
Bug 11312: make facets selectable using an ID [opac-bootstrap]
Signed-off-by: Francesca Moore <francescalamoore@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Francesca Moore [Tue, 14 Jan 2014 01:42:38 +0000 (14:42 +1300)]
Bug 11312: make facets selectable using an ID -- opac-bootstrap
To test:
1. search in OPAC directory
2. inspect the facets, note that they now have spans
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I'm not sure that this change is necessary, since the parent li elements
have IDs that can be hooked onto for CSS, but it doesn't change existing
behaviour and more control is always nice, so that's all right.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 27 Nov 2013 15:35:27 +0000 (16:35 +0100)]
Bug 11312: make facets selectable using an ID [opac-prog]
Signed-off-by: Francesca Moore <francescalamoore@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 27 Nov 2013 15:34:12 +0000 (16:34 +0100)]
Bug 11312: make facets selectable using an ID [staff]
Test plan:
launch a search and verify all facet headers have an id.
Signed-off-by: Francesca Moore <francescalamoore@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11453: Update EN default UNIMARC bibliographic framework
This patch updates default EN UNIMARC bibliographic framework
I used the 2008 version of the UNIMARC bibliographic manual,
and added updates listed on official site.
There are new fields/subfields, those added are hidden by
default.
There are some description changes, and also a lot of
changes to repeatable and mandatory values.
To test:
a) Functional
1) Remove all bibliographic frameworks
2) Load new file unimarc_framework_DEFAULT.sql
3) Check that it load without errors
b) Correctness
1) Take a time and verify that all new
fields/subfileds are correct
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Huge patch, lots of additions and corrections.
To view the changes git diff --color-words HEAD^ is helpful.
Fridolyn SOMERS [Wed, 27 Nov 2013 15:40:09 +0000 (16:40 +0100)]
Bug 11313: supply empty value in mandatory comboboxs in MARC record editors
In biblio (or authority) record editing or creation, Bug 3727 added
an empty value to combobox for subfields using itemtype authorized values,
which is mandatory and does not have a default value. This to avoid
selecting arbitrarily the first value of the combobox.
This patch extends this behavior to normal authorized values like CCODE,
COUNTRY ...
Also, when record already exists and has a defined value for the subfield
this value will be selected in combobox so there is no need for an empty
value.
Test plan :
- In a biblio framework, set a subfield mandatory and using itemtypes
authorised values
- Set a default value for this subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the first empty value is selected
- Go to biblio framework and set a default value for the subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the default value is selected
and there is no empty value
- Select an other value and save the record
- Edit this record
=> You see the subfield with a combobox, the saved value is selected and
there is no empty value
Perform same tests with a normal authorized values categorie (instead of
itemtypes).
Perform same tests with with authority creation/edition
Perform same tests with a normal authorized values categorie and authority
creation/edition
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Fridolyn: I had a lot of difficulty understanding your test plan,
especially since the second line should not be in the test plan
(since if there is a default value, no empty value should appear).
Perhaps it would be useful to use more whitespace to separate
steps and the things for which a tester should check.
Also, it might be useful to specify what testers should check for
before and after applying the patch, so that they're sure that the
behaviour has been corrected.
In any case, the patch works! Certainly a helpful addition.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
1) Adding a bibliographic record
Subfield is mandatory, no default value:
- adding record: no value is preselected, empty value exists
- editing record: saved value is shown, empty value exists
Subfield is mandatory, defined default value:
- adding record: default is preselected, no empty value
- editing record: saved value is shown, no empty value exists
Subfield is not mandatory, defined default value:
- adding record: default is preselected, empty value exists
- editing record: saved value is shown, emtpy value exists
Subfield is not mandatory, no default value:
- adding record: empty value is preselected
- editing record: saved value is shown, empty value exists
2) Adding an authority record
Repeating tests from above.
- Subfield is mandatory, no default value: OK
- Subfield is mandatory, defined default value: OK
- Subfield is not mandatory, defined default value: OK
- Subfield is not mandatory, no default value: OK
Mathieu Saby [Wed, 18 Dec 2013 17:04:25 +0000 (18:04 +0100)]
Bug 11056: Delete dead code in basketgroup.pl
In basketgroup.pl, some code is supposed to be executed if
$op = "validate". But this value is no longer assigned to
the $op variable since 2009.
This patch suppressed dead code, along with parseinputbaskets
and parseinputbasketgroups subs, which are obsolete.
No functional changes expected
Regression test :
* Check basketgroup are shown as before the patch, and can be closed
and reopened.
* Check you can add or remove a basket from a basketgroup, and change
information about it (like delivery place)
* Check you can create a basketgroup when you close a basket.
Liz Rea [Fri, 25 Oct 2013 03:40:03 +0000 (16:40 +1300)]
Bug 11138: add auto_unsuspend_holds to daily crontab (Debian package)
To test:
Install the packages with this patch, observe the /etc/cron.daily/koha-common
file - auto_unsuspend_holds should now be in the default list.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Liz Rea [Thu, 14 Nov 2013 01:52:28 +0000 (14:52 +1300)]
Bug 11138 - Add auto_unsuspend_reserves to crontab.example
To test:
Set up and run the cronjobs from crontab.example with a hold set to
unsuspend today. The hold should be unsuspended.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11330: fix inconsistent field/subfield descriptions on MARC21 bibliographic frameworks
This patch tries to make MARC21 bibliographic frameworks
internally consistent. It modifies field/subfield descriptions
of simple_bib and fastadd frameworks to match corresponding
ones of default framework.
To test:
1) Download and edit the attached script, check-diff.sh
Put on it user, pass and database name of your dev install
Copy the script on your git home
2) Run the script (bash check-diff.sh).
WARNING: the script removes bibliographic frameworks, and load
default, simple_bib and fastadd ones.
It will show on screen, and write on file differences.txt,
any difference on field/subfield description (liblibrarian)
between any framework and default
On master it will show a lot of lines
3) Apply the patch
4) Run the script again. Frameworks files must load without problem.
There will be no differences
NOTE: There are many "space" changes. The reason
to that is to format files to ease the translation process.
Not related with this bug, but necessary.
Also a few changes on default framework.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I ran some tests and found one more case where the
liblibrarian and libopac columns had slightly different
descriptions, adding a follow-up for that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 2 Dec 2013 08:41:53 +0000 (09:41 +0100)]
Bug 11329: Check for MARC record existence in catalogue/showmarc
Intranet counterpart patch. Same check as in opac/opac-showmarc.
Test plan:
[1] Run showmarc.pl with valid biblionumber in id parameter.
[2] Remove id parameter from URL. You should get a 404 now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Marcel de Rooy [Mon, 2 Dec 2013 08:30:13 +0000 (09:30 +0100)]
Bug 11329: Check for MARC record existence in opac-showmarc
Instead of just running as_formatted, check if GetMarcBiblio returned
a reference. If you e.g. did not pass an id, return 404 instead of 500.
Consistent with opac-export.pl
Test plan:
[1] Run opac-showmarc.pl with valid biblionumber in id parameter.
[2] Remove id parameter from URL. You should get a 404 now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 16 Jan 2014 10:02:59 +0000 (11:02 +0100)]
Bug 11237: Update default value for pref AcqItemSetSubfieldsWhenReceived
The default value for this pref should be an empty string, not "0".
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 12 Nov 2013 09:27:17 +0000 (10:27 +0100)]
Bug 11237: Update explanation for pref AcqItemSetSubfieldsWhenReceived
This patch improves the description of the AcqItemSetSubfieldsWhenReceived
system preferences to clarify that it applies to updating items
during order receipt, if those items where created when the order was
placed.
Test plan:
Update the updatedb entry and search the pref in the admin module.
The explanation should have been updated.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Roman Amor [Thu, 16 Jan 2014 02:55:03 +0000 (15:55 +1300)]
Bug 11363: make units in label printer profile form translatable
Changed the unit names form an import to a switch case so that it is in
the .tt so that it can be translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 17 Jan 2014 05:54:09 +0000 (05:54 +0000)]
Bug 11477: (follow-up) improve display of user/patrons in logs tool
This patch tweaks the display of patron and user names in the logs
tool so that if a name is present, the patron/user ID that follows
it is enclosed in parentheses.
David Cook [Mon, 6 Jan 2014 04:19:21 +0000 (15:19 +1100)]
Bug 11477 - Add names for librarian and borrowers in the logs
This patch adds the first name and surname of the librarian and the
user involved in a transaction log, if available.
If neither the firstname or the surname is available, then the 'object'
number will be prefaced with the 'Member' qualifier.
_TEST PLAN_
0) This patch depends on Bug 11473, so you must apply it first
Before applying this patch (11477):
1) View the logs.
2) Note that the Librarian column just has a number
3) Note that the Object column will just say Member X (where X is a
number), in the circulation, fines, and patron/member modules.
Apply the patch.
4) Reload the logs (you don't need to make new ones)
5) Note that the Librarian and Object columns mentioned above now
have firstname and surname appearing (where available)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Galen Charlton [Fri, 17 Jan 2014 06:04:37 +0000 (06:04 +0000)]
Bug 11473: (follow-up) ensure link to item is construct correctly
This patch adjusts the check on action_logs.info to better detect
if the event concerns an item. This fixes a problem where the links
from log entries on item modifications would, if followed, result
in internal server errors.
David Cook [Mon, 6 Jan 2014 04:01:10 +0000 (15:01 +1100)]
Bug 11473 - add 'biblio' and 'item' to cataloguing logging info
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
David Cook [Mon, 6 Jan 2014 03:43:53 +0000 (14:43 +1100)]
Bug 11473 - Remove boilerplate in log viewer template
This patch eliminates unnecessary conditions and boilerplate.
_TEST PLAN_
Apply the patch.
1) Try viewing logs for circulation, patrons, fines,
cataloguines, serials, authorities, etc.
2) Note that everything should look exactly the same as before,
with one exception: FINES
3) Fines will now show "member X" for the user associated with
the fine.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
David Cook [Mon, 6 Jan 2014 03:32:31 +0000 (14:32 +1100)]
Bug 11473 - Fix log viewer template conditions
This patch adds the 'loopro' key to the 'module' value, so that
conditions are actually triggered in the template logic.
(Note: loopro.CIRCULATION is valid, but I changed it for the sake
of consistency across the different conditions.)
This patch also adds substr checks to the 'info' column when
using the cataloguing module. This will check for 'item' and 'biblio',
so that the appropriate label qualifer can be shown in the log viewer.
If either term is absent, the unqualified number will be shown instead
(this will be the majority of action logs at this point).
_TEST PLAN_
Before applying:
1) Access log viewer from Tools (or wherever really)
2) Look up logs for circulation, patrons, cataloguing, serial,
authorities, etc.
3) Note that the "Object" will always just be a number without qualification.
After applying the patch:
1) Look at those same logs
2) Note that the object number for borrowers will usually be prefaced
by 'member' (notwithstanding FINES which aren't taken into account in
this template yet); new bibs and new items should say 'Item X' or
'Biblio X'. Serials should have a link. Authorities should have a link
and an 'auth' preface.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 10 Jan 2014 16:56:15 +0000 (11:56 -0500)]
Bug 11476: remove extra empty option from title pull-down in OPAC self-registration
If you have patron titles enabled, the OPAC patron details form lists 2
empty spaces instead of 1. An empty option is passed by the script, so
the template does not need to include one.
To test you must have at least one patron title set in BorrowersTitles
system preference and OPACPatronDetails must be set to "allow."
1. Apply the patch
2. Log in to the OPAC
3. Click the "personal details" tab.
4. Click the "salutation" dropdown. There should be only one blank line
preceding the existing titles.
Test in both prog and bootstrap.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described for existing and creating new accounts.
Jonathan Druart [Tue, 8 Oct 2013 15:17:45 +0000 (17:17 +0200)]
Bug 11018: allow adding order from a reverted MARC batch
Weird behavior:
When an import is undone into catalog, the status is set to "reverted".
But if you open the add orders from iso2709, the status is automatically
set to "imported" and does not appear in the list.
So it is not possible to import a reverted batch.
[RM note: since a reverted batch is nonetheless a staged batch, and
could be reused, allowing orders to be placed by taking bibs
from a reverted batch is not as odd as it might sound. It *can* look
odd for a staged or reverted batch to contain records that are
imported, but that's a long-standing oddity.]
Test plan:
- verify you reproduce the weird behavior
- apply this patch
- import a file and the batch into the catalog
- verify (in the your mysql/MariaDB cli) the status is "imported"
- verify it does not appears in the add orders from iso2809 page
- undo the import
- verify (in the your mysql/MariaDB cli) the status is "reverted"
- verify it appears in the add orders from iso2809 page and the status
is always "reverted"
- finish the order
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9788: (follow-up) Unit tests for changed routine GetReservesFromItemnumber
Adds three tests to Reserves.t for GetReservesFromItemnumber.
We test if this routine does not return a future next available hold,
a future item level hold. And if it does return a future wait (that is:
a confirmed future hold, using ConfirmFutureHolds).
Note that Holds.t does also contains some basic tests for this routine,
but the additional tests seem to better located in the direct context of
tests for bug 9761 for ConfirmFutureHolds.
Test plan:
Run both t/db_dependent/Holds.t and t/db_dependent/Reserves.t.
Verify if both tests do not fail.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 4 Nov 2013 10:55:57 +0000 (11:55 +0100)]
Bug 9788: QA followup
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Fri, 21 Jun 2013 16:43:59 +0000 (18:43 +0200)]
Bug 9788: (follow-up) for expirationdate in Letter.pm
Pasting comment from the Bugzilla report:
Looking bit longer at this code, it is kind of strange to find it
there in the first place. Adding maxpickupdelay in Letters.pm should
not be there, but it is..
Also this date is not used normally in the default HOLD Available for
Pickup notice (that we are generating in this case). And if it would be
undef, the expiration date should imo be empty instead of today+0.
(before adding maxreservespickupdelay, you should test the allowexpire
pref first) So it is an (invisible) bug on its own.
Test plan:
See former patch. Kyle just discovered this bug, apparently by
deleting the maxpickupdelay pref..
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9788: (follow-up) removing the alldates parameter from GetReservesFromItemnumber
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 11 Mar 2013 13:28:57 +0000 (14:28 +0100)]
Bug 9788: Improvements when calling GetReservesFromItemnumber
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 16 Jan 2014 23:07:09 +0000 (23:07 +0000)]
Bug 10987: (follow-up) fix display of authorities containing only one see from or see also lnik
This patch fixes an incorrect test on the number of see from and
see also links in the authority record, as otherwise if a record
had only one 4XX or 5XX, the linked headings weren't displayed at
all. This patch also makes the test consistent across the staff
theme and the two OPAC themes.
Bug 10987: remove duplicate 'see also' and 'see from' labels from authority search results
If an authority record has more than one 4xx$a (or 5xx$a) entries the
corresponding labels 'see also' and 'used for/see from' werwe repeated.
This patch removes duplicate instances of the labels, improving
readability.
To test:
- Have authority records with more than one entry on the 4xx (or 5xx)
fields.
- Do a search, check "see also:" (or 'used for/see from') appear more
than once.
- Apply the patch
- Reload and check it looks nicer :-D
- Repeat for: staff auth search, OPAC using ccsr, OPAC using prog
- Signoff
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as decribed. No koha-qa errors
Nice view on staff and both opac
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 16 Jan 2014 22:44:25 +0000 (22:44 +0000)]
Bug 10691: (follow-up) replace HTML comments with TT contents
Comments on the usage of Template Toolkit blocks don't need
to appear in the rendered HTML, so this patch converts HTML
comments to TT comments and thereby saves a tiny amount of
bandwidth.
Bug 10691: (follow-up) restore behaviour for control field ($w)
As noted by Jared, in the presence of 4XX$w or 5XX$w the display
got broken by this refactoring. This patch restores the previous
behaviour in that front.
The OPAC themes get fixed too, and the Bootstrap one gets this
fix too.
Applied the fix that Galen proposed on comment #30 regarding
Zeno's fix in bug 11174.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10691: use authority ID in see-also links in authority search results (OPAC)
This patch changes the URL and data used to show the 'see also' links
on the OPAC's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a without linking (i.e. plain text)
- Make sure zebra is running and changes got indexed.
- In the OPAC search for the authority that is linked to the others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id in the case
of linked authorities, and to an authority search in the case of
plain text headings.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10691: use authority ID in see-also links in authority search results (staff)
This patch changes the URL and data used to show the 'see also' links
on the Staff's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a entries with plain text (i.e. no
linking)
- Make sure zebra is running and changes got indexed.
- In the staff interface search for the authority that is linked to the
others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id for linked
authorities,
and to an authority search result in the case of plain text entries.
- Check that the authority search from the cataloguing interface still
works as usual.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Francesca Moore [Tue, 14 Jan 2014 22:43:00 +0000 (11:43 +1300)]
Bug 11522: improve formating of self-registration form
1. in prog theme, enable opac self-registration and inspect clear date
with firebug; note that there are empty paragraph tags
2. add date of birth as a requirment in self-registration
3. apply patch
4. refresh page and notice that empty paragraph tags have been deleted,
so that required lines up with clear date
5. repeat the above steps for bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sophie Meynieux [Tue, 4 Dec 2012 17:05:36 +0000 (18:05 +0100)]
Bug 9210: wrap long lines in printed hold notices
This commit adds wrapping styles to print-notices.tt template
Test plan:
* place a hold on a title with a very very long title or author
* mark it as "waiting for pickup" by doing a checkin
* go to command line interface, and run
* misc/cronjobs/gather_print_notices.pl /tmp
* misc/cronjobs/printoverdues.sh /tmp
* if your title/author is long enough, it's split on 2 lines
with this patch (it is not before this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 14 Jan 2014 20:04:27 +0000 (15:04 -0500)]
Bug 11541: (follow-up) repair some warnings
Tests succeed, but cause many warnings:
prove t/Installer.t
t/Installer.t .. 1/9 "my" variable $self masks earlier declaration in
same scope at t/Installer.t line 19.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 20.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 21.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 22.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 23.
Odd number of elements in anonymous hash at t/Installer.t line 17.
Use of uninitialized value within @ARGV in anonymous hash ({}) at
t/Installer.t line 17.
The patch remedies that.
Test Plan:
1) Apply first patch on this bug
2) Run "prove t/Installer.t"
3) Note the warnings
4) Apply this patch
5) Repeat step 2
6) Note the warnings are gone
Aleisha Amohia [Tue, 14 Jan 2014 01:18:36 +0000 (14:18 +1300)]
Bug 11541: increase test coverage of Installer.pm
To test
1. Run prove t/Installer.t
2. Apply patch
3. Run prove t/Installer.t
Notice more tests are run
Signed-off-by: Francesca Moore <francescalamoore@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass :)
Emma Heath [Tue, 14 Jan 2014 01:18:47 +0000 (14:18 +1300)]
Bug 11540: increase test coverage of Charset.pm
To test
1. run prove t/Charset.t
2. apply patch
3. run prove t/Charset.t
notice more tests are run
Signed-off-by: Tom Houlker <thomas.houlker@hibs.school.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass!
Tom Houlker [Tue, 14 Jan 2014 01:24:11 +0000 (14:24 +1300)]
Bug 11539: removing 2 unused files
This patch removes C4::Barcodes::PrinterConfig, which is
used by no other code in the database.
Signed-off-by: Emma Heath <emmaheath.student@wegc.school.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No instances of PrinterConfig found in the codebase
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any reference to those files in Koha.
merllissia [Tue, 14 Jan 2014 01:18:35 +0000 (14:18 +1300)]
Bug 11545: Increasing test coverage for Languages.pm
To test
1. Run prove t/Languages.t
2. Apply patch
2. Run prove t/Languages.t again and notice: More tests are run
Signed-off-by: alex_h <dhorsman@xtra.co.nz> Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Adds another passing test. I took th liberty of moving the test plan
from the subject to the commit message. :-)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass :)
David Cook [Thu, 9 Jan 2014 06:12:26 +0000 (17:12 +1100)]
Bug 11502: make library filter in "Holds To Pull" more precise
This patch uses regex checking via the DataTables fnFilter API method
to make the branch filter more precise on the "Holds to Pull" page.
The ability to use regex is built into DataTables so this just adds
the actual expression.
_TEST PLAN_
Before applying:
1) Add library (branches) with codes of NM, NMH, and NB
2) Add items (that can be placed on hold) at all these branches
3) Place a hold on an item that is only available at NM
4) Place a hold on an item that is only available at NMH
5) Place a hold on an item that is only available at NM and NB
6) Go to "Holds to Pull" in the Circulation module
7) Filter by these three different values
8) Note that filtering by "NM" will incorrectly bring up all three
holds, while "NMH" and "NB" will only pull up one (like they should).
Apply the patch.
9) Shift+refresh the page so that your Javascript refreshes
10) Repeat step 7 (filtering by the different branch values)
11) Note that filtering by "NM" will now only bring up the hold for "NM"
and the hold for "NM" and "NB", while the others still only bring up
one hold.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
alex_h [Mon, 13 Jan 2014 22:52:04 +0000 (11:52 +1300)]
Bug 11537: Increasing test coverage for C4::Log
To test:
1. run prove t/Log.t
Notice 1 test is run
2. apply patch
3. run prove t/Log.t
Notice 3 tests are run
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think there might be a typo in "Testing git log status". Should
this read "Testing get log status"? (Noticed while looking at the
code/running perl t/Log.t.)
In any case, thanks for the patch. Looks good!
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fixed typo, thanks David
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described:
1..3
ok 1 - use C4::Log;
ok 2 - Testing GetLogStatus
ok 3 - Testing hash is non empty
Galen Charlton [Mon, 13 Jan 2014 21:51:56 +0000 (21:51 +0000)]
Bug 11535: sanitize input from patron self-registration form
This patch adds the use of C4::Scrubber to the processing of input
from the patron self-registration form, thereby closing off one
avenue for Javascript injection.
To test:
[1] Use the OPAC self-registration form to enter a new patron,
and set its address to something like:
<span style="color: red;">BAD</span>
[2] In the staff interface, bring up the new patron record. The
address will show up in red, indicating a successful HTML
injection.
[3] Apply the patch and use self-registration to enter a new
patron with a similar case of unwanted HTML coding.
[4] Bring up the second patron in the staff interface. This time,
the undesirable HTML tag should not be present.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tags are not present on testing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug and that the patch fixes it.
Passes all tests and QA script.
Ketan Kulkarni [Wed, 9 Oct 2013 14:37:27 +0000 (20:07 +0530)]
Bug 10318: Show primary email in patron search results
This patch makes the patron's primary email address be displayed (as
a mailto link) on the patron search results page.
Signed-off-by: Melissa Lefebvre <melissa@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, template only change.
Owen Leonard [Fri, 10 Jan 2014 20:46:29 +0000 (15:46 -0500)]
Bug 11505: fix untranslatable table headers in Label batch manager
The label batch manager script hard-codes the table header cell labels
in order to pass them to an HTML-building function. This obviously isn't
the best solution for internationalization, but picking the whole scheme
apart would be very complicated.
Instead this patch uses a SWITCH statement to check for each possible
case and outputs the correct translatable string for each.
To test, apply the patch and run "perl translate update" for any
translation. Check the revised po file and confirm that the new strings
are present. View the label batch edit page and confirm that the table
headings look correct: Tools -> Labels -> Manage batches -> Edit batch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests.
Similar fixes are probably needed for other pages of the labels
modules.
Owen Leonard [Fri, 10 Jan 2014 17:45:30 +0000 (12:45 -0500)]
Bug 11381: improve styling of IDreamBooks content in bootstrap theme
Styling of IDreamBooks elements is not correct in the bootstrap theme
because the relevant CSS was not transferred from the prog theme. This
patch adds it back.
To test, switch to the bootstrap theme and enable IDreamBooks system
preferences in the OPAC, particularly IDreamBooksReadometer. Find a book
in the OPAC which shows IDreamBooks review data and confirm that
everything looks correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested with "The help".
Bug 10896: Add a --verbose option to koha-translate
The -v and --verbose option switches add the --verbose switch to the
misc/translator/translate script call in the packages' 'koha-translate'
command.
The docs are updated accordingly.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as expected with and without -v. Man page looks good.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Thu, 12 Dec 2013 23:55:14 +0000 (23:55 +0000)]
Bug 11389: reenable Pg as a DB scheme that Koha can connect to
This patch restores the ability to request a DBI database handle
or a DBIx::Class schema object connected to a PostgreSQL database.
To address the concerns raised in bug 7188, only "mysql" and "Pg"
are recognized as valid DB schemes. If anything else is passed
to C4::Context::db_scheme2dbi or set as the db_scheme in the Koha
configuration file, the DBD driver to load is assumed to be "mysql".
Note that this patch drops any pretense of Oracle support.
To test:
[1] Apply patch, and verify that the database-dependent tests
pass when run against a MySQL Koha database.
[2] To test against PostgreSQL, create a Pg database and
edit koha-conf.xml to set db_scheme to Pg (and adjust
the other DB connection parameters appropriately). The
following tests should pass, at minimum:
t/Context.t
t/db_dependent/Koha_Database.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some additional notes:
- Installed Postgres following
http://wiki.ubuntuusers.de/PostgreSQL
- Created a database user koha
- Created a database koha
- Changed the koha-conf.xml file
<db_scheme>Pg</db_scheme>
<database>koha</database>
<hostname>localhost</hostname>
<port>5432</port>
<user>koha</user>
<pass>xxxx</pass>
- Installed libdbd-pg-perl
- Ran the web installer until step 3 everything looked ok
Step 3 complains:
Password for user koha: psql: fe_sendauth: no password supplied
- Both t/Context.t and t/db_dependent/Koha_Database.t pass
Bug 11509: improve usage information printed by koha-create
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
The koha-translate's usage message has a couple of inconsistencies:
'--all' should be '--available'
and '--help' is missing from the usage examples.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested using instructions on
http://wiki.koha-community.org/wiki/Testing_man_pages
Galen Charlton [Fri, 10 Jan 2014 16:49:01 +0000 (16:49 +0000)]
Bug 10952: (follow-up) clear seach history from session after saving it to DB
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Julian Maurice [Wed, 18 Dec 2013 09:58:36 +0000 (10:58 +0100)]
Bug 10952: (follow-up) comments fixes and unit tests
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Julian Maurice [Thu, 26 Sep 2013 09:22:26 +0000 (11:22 +0200)]
Bug 10952: Store anonymous search history in session
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Robin Sheat [Tue, 15 Oct 2013 02:01:31 +0000 (15:01 +1300)]
Bug 11051: remove unneccessary SQL queries in GetBranches
The way GetBranches was written, it will issue one query to get all
branches, and then one query per branch for the branch relations.
This patch pre-fetches the relations table (as we need it all anyway)
and so makes the whole process happen in two queries, rather than take
1+N, where N is the number of branches.
This might not seem like much, but when you do a search, GetBranches is
called once for each result, so 25. And you might have 10 branches. This
causes 275 database requests when you could get away with 50.
From profiling, when you run a search, this is the thing that calls
DBI::st::execute the most. Refer:
http://debian.koha-community.org/~robin/opac-search/usr-share-koha-lib-C4-Branch-pm-146-line.html#125
Test Plan:
* Have a database with branches and relationships between the branches.
(these are 'Library groups' in the UI.
* Make sure the relationships show up correctly after applying the
patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 7 Jan 2014 14:14:01 +0000 (15:14 +0100)]
Bug 11475: fix return link after editing/deleting items in batch
Bug introduced by bug 9044.
Test plan:
1- First we search for records with multiple items (books or serials,
does not matter)
2- We open this record we found with multiple items for editing
3- We chose "Edit items in batch" option from the "Edit" menu
4- We make corrections on the fields under the "Edit item" (For example
we change the collection code as "fiction")
5- We save this using "Save button" at the bottom, after we are done.
6- Just after we save, there will be a button named "Done" available
just under the page, and when we click on "Done" we encounter the Error
screen.
Before the patch, the "Done" link points to
/cgi-bin/koha/tools/CATALOGUING.
After applying the patch, the "Done" link points to the biblio detail
page.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Robin Sheat [Tue, 19 Nov 2013 03:19:12 +0000 (16:19 +1300)]
Bug 10646 - warn if mod_rewrite is not enabled
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Bug 11499: UT: Make zebra_setup.pl correctly set indexing mode
By adding the relevant environment variables to the script the generated
koha-conf.xml file for the unit tests is correct now.
Test plan:
- Verify that tests pass now:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes unit test, koha-qa.pl
Bug 11499: (regression tests) indexing modes not properly set on generated koha-conf.xml
t/db_dependent/Search.t creates its own temporary koha-conf.xml and
related files, and it fails to properly set indexing modes for
bibliographic and authority records.
The test should fail unless the main page is applied.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This UT got wrapped inside a transaction with autocommit=0 but
the rollback call was inadvertedly ommited. Adding it.
[RM note: an explicit rollback is not required, as the
transaction will roll back automatically at the end of
the DB session. Nonetheless, it hurts nothing to have
it be explicit.]
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Mon, 6 Jan 2014 16:53:33 +0000 (16:53 +0000)]
Bug 11480: Fix invalid assumptions in JSONStream test
Tests for C4::Output::JSONStream made the invalid assumption
that the hash keys of the modules internal structure
will always be returned in the same sequence.
A hash is an unordered structure. as of perl 5.18
this has beem reinforced by random seeding of the
hashing function. See the info in perldelta and
the doc for JSON.
This patch changes the tests to be sequence-neutral
where the previous test was testing that a new element
was added and an existing one was untouched these have
been separated into individual tests.
Some typos in the messages have been corrected
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test Plan
1/ Run t/Output_JSONStream.t , 8 tests should pass (or perhaps fail,
but inconsistently under perl 5.18 or greater)
2/ Apply patch
3/ Run t/Output_JSONStream.t 10 tests should pass now
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Fri, 27 Dec 2013 06:06:34 +0000 (19:06 +1300)]
Bug 7965: Silence warns in staff log
Silence warns in C4::Bookseller::GetBooksellersWithLateOrders()
to test
1/ run prove t/db_dependent/Bookseller.t
Notice lots of Use of uninitialized value $delay in numeric lt (<) at /var/lib/jenkins/jobs/Koha_master/workspace/C4/Bookseller.pm line 134 type lines
2/ apply patch
3/ run prove t/db_dependent/Bookseller.t
Notice warns are gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tiny change, positive consequences.
Passes QA script and all tests.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 10 Jan 2014 15:21:29 +0000 (15:21 +0000)]
Bug 10774: (follow-up) tweak styling of buttons on Bootstrap theme
Following a discussion with Kyle, this patch applies the
btn-mini style to the per-hold cancel and suspend/unsuspend
buttons to make them a bit smaller.
Kyle M Hall [Wed, 21 Aug 2013 11:30:54 +0000 (07:30 -0400)]
Bug 10774: Allow individual holds to be suspended and resumed from the OPAC
Right now, holds can only be suspended and resumed from the OPAC as a
whole. It would be nice to be able to suspend and resume holds on a hold
by hold basis from the OPAC.
Test Plan:
1) Apply this patch
2) Log in to the OPAC
3) Place a number of holds
4) Browse to "my summary" and select the holds tab
5) From here, test the following actions
a) Suspend a hold indefinitely ( no resume date )
b) Suspend a hold with a date to automatically resume
c) Manually resume a suspended hold
6) Disable AutoResumeSuspendedHolds, ensure the suspend until date field
is no longer visible.
7) Disable SuspendHoldsOpac, ensure all suspension related fields are
no longer visible.
Signed-off-by: Chris Rohde <crohde@roseville.ca.us> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Thu, 2 Jan 2014 04:15:56 +0000 (17:15 +1300)]
Bug 11457: avoid spurious test failure in t/db_dependent/Bookseller.t
This patch clears the subscription table so tests pass correctly if
there happens to have been a subscription with an end date before
2013-08-01.
To test
1/ Add a subscription in the serials module, with an end date before
2013-08-01
2/ run prove -v t/db_dependent/Bookseller.t
Notice tests 22 and 23 fail
3/ Apply patch
4/ run test again
5/ Notice tests succeed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests now clean the subscription table before running
the tests, so that the will always pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 21:58:52 +0000 (22:58 +0100)]
Bug 11260: Follow up - normalizing frequencies in English sample file a bit
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 21:56:45 +0000 (22:56 +0100)]
Bug 11260: Update German web installer - frequencies and numberpatterns
Translates the new files for frequencies and numberpatterns
To test:
- Run the German web installer with all sample files
- Check all files import without errors, especially frequencies and
numbering patterns
- Check frequencies in serials
- Check numbering patterns in serials
- Create a subscription, check possible choices
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 20:05:45 +0000 (21:05 +0100)]
Bug 11260: Update German web installer for 3.14
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
projects / koha.git / log