]> git.koha-community.org Git - koha.git/log
koha.git
8 years agoBug 10227 : Fix GetMessagingPreferences when digest is possible
Sophie Meynieux [Wed, 24 Aug 2016 12:56:54 +0000 (14:56 +0200)]
Bug 10227 : Fix GetMessagingPreferences when digest is possible

This bug is a bit tricky to test, as the result is somehow  random, depending on the order of rows returned by sql request. You've got to change the preferences several times to see bad results.

Enable EnhancedMessaging preferences
Set preferences for a borrower or a category.
run misc/cronjobs/advance_notices.pl and look in message_queue table the letter_code of the generated messages.
Change digest selection and do the test again several times

Without patch, for message where digest is allowed (Advance_Notice, Item_Due), for a borrower or a category with 'wants_digest' selected, GetBorrowerMessagingPreferences returns sometimes letter_code with DGST and sometimes not.

With the patch, letter_code returned is always correct depending on digest selected or not

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17295 - Missed variable removal in subscription-add.pl from Bug 15758
Nick Clemens [Tue, 13 Sep 2016 14:08:23 +0000 (14:08 +0000)]
Bug 17295 - Missed variable removal in subscription-add.pl from Bug 15758

To test:
Load subscription-add.pl
Get an error
Apply patch
Reload
Koha is less sad (page loads okay)
Verify that normal functions work

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13914 : Fix UNION in SQL request for reserves statistics
Sophie Meynieux [Wed, 10 Aug 2016 14:06:35 +0000 (16:06 +0200)]
Bug 13914 : Fix UNION in SQL request for reserves statistics

Test plan
=========
On Reports > reservations, select all statuses as line, pickup library as column (empty) and a range of hold date. Keep the results
Run the same reports but with statuses as column and pickup library as line
You should get the same results on another display.

* Without patch, if you've got representative data, most of the time you can observe significant differences between both results

* With the patch, results are always the same (and right if you request directly your database)

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15407: Remove 'No method selected!' warnings
Jonathan Druart [Tue, 13 Sep 2016 08:47:14 +0000 (09:47 +0100)]
Bug 15407: Remove 'No method selected!' warnings

From reserves_stats.pl, there is no library pre-selected.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16274 - DBRev 16.06.00.026
Kyle M Hall [Mon, 12 Sep 2016 15:38:46 +0000 (15:38 +0000)]
Bug 16274 - DBRev 16.06.00.026

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16274: Limit the patron self registration to some libraries
Jonathan Druart [Sat, 23 Apr 2016 15:37:26 +0000 (16:37 +0100)]
Bug 16274: Limit the patron self registration to some libraries

Currently a patron can select a home library in the list of all
libraries defined in the system.
However some of these libraries might not accept self registration.
This patch adds a new pref to display only the allowed libraries.

Test plan:
0/ Apply the patch, do not fill the new pref
1/ Self register a new patron
=> All the libraries defined should be displayed in the "Home library"
dropwdown list
2/ Fill the pref PatronSelfRegistrationLibraryList with some of the
branchcode defined in the system
=> Self register a new patron and confirm that the dropdown list has
been filtered.

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16274: Add the new pref PatronSelfRegistrationLibraryList
Jonathan Druart [Sat, 23 Apr 2016 15:17:06 +0000 (16:17 +0100)]
Bug 16274: Add the new pref PatronSelfRegistrationLibraryList

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
8 years agoBug 16967: Remove the use of "onclick" from serial frequency and numbering management
Owen Leonard [Fri, 22 Jul 2016 18:48:36 +0000 (14:48 -0400)]
Bug 16967: Remove the use of "onclick" from serial frequency and numbering management

This patch removes instance of "onclick" from the templates for serial
frequency and numbering management. Events are now defined in the
JavaScript.

To test, apply the patch and go to Serials -> Manage frequencies.

 - In the list of frequencies, click the "Delete" button for a frequency
   which is in use by at least one subscription. In the confirmation
   dialog, clicking the "Show subscriptions" link should display a list
   of titles.
 - Edit or create a frequency.
 - To test that the form submission validation is still working
   correctly, enter non-numeric data in the "issues per unit" field and
   submit the form. This should trigger an error.

In Serials -> Manage numbering patterns:

 - In the list of numbering patterns, click the "Delete" button for a
   pattern which is in use by at least one subscription. In the
   confirmation dialog, clicking the "Show subscriptions" link should
   display a list of titles.
 - Edit or create a numbering pattern.
 - Confirm that the "Test pattern" button works correctly.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17285: (15758 follow-up) Fix advanced editor
Jonathan Druart [Mon, 12 Sep 2016 15:45:22 +0000 (16:45 +0100)]
Bug 17285: (15758 follow-up) Fix advanced editor

Little mistake from df97814, $branches is a hash { branchcode =>
branchname }

Test plan:
Edit a biblio with the advanced editor

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
The advanced editor works as expected

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17197: Remove misc/batchupdateISBNs.pl
Jonathan Druart [Thu, 25 Aug 2016 13:46:21 +0000 (14:46 +0100)]
Bug 17197: Remove misc/batchupdateISBNs.pl

This script has not been updated for ages and is UNIMARC specific.
Since I am working on bug 17196 to move marcxml out of biblioitems
table, I'd like not to rewrite unused scripts (and lost my time...)
So if someone complains later, I will rewrite it on top of bug 17196.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 - Remove atomic update
Kyle M Hall [Mon, 12 Sep 2016 09:44:48 +0000 (09:44 +0000)]
Bug 7677 - Remove atomic update

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 - Schema update
Kyle M Hall [Mon, 12 Sep 2016 09:39:54 +0000 (09:39 +0000)]
Bug 7677 - Schema update

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 [QA Followup] - Fix issues with kohastructure
Kyle M Hall [Mon, 12 Sep 2016 09:38:06 +0000 (09:38 +0000)]
Bug 7677 [QA Followup] - Fix issues with kohastructure

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 - DBRev 16.06.00.025
Kyle M Hall [Mon, 12 Sep 2016 09:15:38 +0000 (09:15 +0000)]
Bug 7677 - DBRev 16.06.00.025

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: UT: Remove $dbh->rollback
Julian Maurice [Thu, 8 Sep 2016 07:15:48 +0000 (09:15 +0200)]
Bug 7677: UT: Remove $dbh->rollback

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: QA followup
Matthias Meusburger [Tue, 30 Aug 2016 08:41:56 +0000 (10:41 +0200)]
Bug 7677: QA followup

 - Fix tests

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: QA followup
Julian Maurice [Thu, 25 Aug 2016 14:08:45 +0000 (16:08 +0200)]
Bug 7677: QA followup

Fix 'unique contraint primary' error when receiving serials

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 [QA Followup] - Replace GetItemnumberFromSerialId with use of Koha::Serial...
Matthias Meusburger [Fri, 3 Jun 2016 13:56:36 +0000 (15:56 +0200)]
Bug 7677 [QA Followup] - Replace GetItemnumberFromSerialId with use of Koha::Serial::Item(s)

 - use _type instead of type (see https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=15446 )

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 [QA Followup] - Replace GetItemnumberFromSerialId with use of Koha::Serial...
Kyle M Hall [Fri, 29 Jan 2016 01:46:02 +0000 (01:46 +0000)]
Bug 7677 [QA Followup] - Replace GetItemnumberFromSerialId with use of Koha::Serial::Item(s)

GetItemnumberFromSerialId has no unit tests. It would be better to start
using our object system here.

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677 [Follow-up]: New areas in subscriptions and new functions when receiving.
Matthias Meusburger [Mon, 28 Sep 2015 14:29:16 +0000 (16:29 +0200)]
Bug 7677 [Follow-up]: New areas in subscriptions and new functions when receiving.

 - Various fixes.

Test plan:

Once the makePreviousSerialAvailable syspref is enabled, receive a serial, and then another, then check that:

 - the first received itemtype has been set to the "previous item type" value (set in the subscription).

 - the first received has been made available.

 - the last received serial itemtype has been set to the "item type" value (set in the subscription).

 - 995$l is automatically prefilled.

Configure the serialsFieldsToAV syspref. When creating or editing a subscription, check that:

 - the domain and/or origin and/or support fields are correctly displaying the authorized values configured in the syspref.

Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: Fix tests
Jonathan Druart [Tue, 23 Dec 2014 15:51:41 +0000 (16:51 +0100)]
Bug 7677: Fix tests

They don't pass since bug 12098 has been pushed.

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: FIX QA issues
Jonathan Druart [Mon, 10 Mar 2014 10:58:33 +0000 (11:58 +0100)]
Bug 7677: FIX QA issues

 FAIL    C4/Serials.pm
   FAIL      forbidden patterns
    forbidden pattern: trailing space char (line 1501)
    forbidden pattern: trailing space char (line 921)

 FAIL    serials/serials-edit.pl
   FAIL      valid
        "my" variable $dbh masks earlier declaration in same scope

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 7677: UT: add unit tests for GetPreviousSerialid
Jonathan Druart [Wed, 21 Aug 2013 12:38:34 +0000 (14:38 +0200)]
Bug 7677: UT: add unit tests for GetPreviousSerialid

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBZ7677: New areas in subscriptions and new functions when receiving.
Matthias Meusburger [Thu, 9 Jan 2014 16:06:14 +0000 (17:06 +0100)]
BZ7677: New areas in subscriptions and new functions when receiving.

When enabling the makePreviousSerialAvailable syspref, the previously
 received serial's itemtype is set as defined in the subscription.
 (Please note that the item-level_itypes syspref must be set to specific item.)
 It is also made available.

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17281 Warning when saving subfield structure
Frédéric Demians [Fri, 9 Sep 2016 06:06:19 +0000 (08:06 +0200)]
Bug 17281 Warning when saving subfield structure

TO TEST:

1. Home > MARC Framework > Default > Actions > MARC structure
2. On 073 field (for example), click Edit
3. Click on Edit subfield button
4. Click on Save changes
5. Take a look in intranet logs. You find:
   Use of uninitialized value in string eq at
   ../admin/marc_subfields_structure.pl
6. Apply the patch, and repeat steps 3-5
   => no more warning in log

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16311 - Fix DBRev description
Kyle M Hall [Mon, 12 Sep 2016 09:09:59 +0000 (09:09 +0000)]
Bug 16311 - Fix DBRev description

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16311 - DBRev 16.06.00.024
Kyle M Hall [Mon, 12 Sep 2016 09:08:27 +0000 (09:08 +0000)]
Bug 16311 - DBRev 16.06.00.024

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16311 - Advanced search language limit typo
Andreas Roussos [Fri, 9 Sep 2016 16:46:33 +0000 (19:46 +0300)]
Bug 16311 - Advanced search language limit typo

In the OPAC -> Advanced Search, the Language drop down menu incorrectly
lists Romanian as "Român (Romanian)" while the correct value (as reported
by Barry Cannon) is "Română (Romanian)".

This patch fixes that:
a) for _new_ installations by modifying
   installer/data/mysql/mandatory/subtag_registry.sql (loaded by the web
   installer when koha is installed), and also
b) for _existing_ installations by adding an atomicupdate file in
   installer/data/mysql/atomicupdate/

Test plan:
1) In the OPAC, go to Advanced search (cgi-bin/koha/opac-search.pl).
2) In the 'Language' drop down menu, observe that the value for Romanian
   is "Român (Romanian)".
3) Apply the patch, and run installer/data/mysql/updatedatabase.pl.
4) Refresh the Advanced search page in the OPAC. Confirm that the patch
   worked, i.e. the Language drop down menu lists Romanian as
   "Română (Romanian)" (notice the added 'ă').

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17284 - Patron details page ( moremember.pl ) show logged in library as patron...
Kyle M Hall [Fri, 9 Sep 2016 14:24:31 +0000 (14:24 +0000)]
Bug 17284 - Patron details page ( moremember.pl ) show logged in library as patron's home library

The patron details page always show the logged in library as the
patron's home library instead of the true home library. This bug is
particular to moremember.pl and does not affect other patron pages.

Test Plan:
1) Find a patron with a home library other than the logged in library
2) Note the patron home library as shown on moremember.pl matches
   the logged in library and not the patron's true home library
3) Apply this patch
4) Reload moremember.pl, the correct home library should display!

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17206: Fix switch to default framework
Jonathan Druart [Wed, 7 Sep 2016 09:26:12 +0000 (10:26 +0100)]
Bug 17206: Fix switch to default framework

When editing a bibliographic record, if you switch the framework to
default, the page is reloaded but the framework is not changed.
From the pl script, you can see that the frameworkcode is set to the one
of the biblio if set to false. The empty string, which means default,
should be taken into account.

Test plan:
- Create a record using the Fast add framework
- Save the record
- Open the record for editing
- Use the "Settings" pull down to change the framework to default
- Try another framework
- Try changing to default from there

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17194 - When edit record, Button "Z39.50/SRU search" not work
Owen Leonard [Thu, 8 Sep 2016 14:11:56 +0000 (10:11 -0400)]
Bug 17194 - When edit record, Button "Z39.50/SRU search" not work

Bug 15859 introduced a problem in the basic cataloging editor by
removing a form field which the Z39.50 search button tries to use when
triggering the search window pop-up. This patch corrects the error by
changing where the script looks for the required framework code.

To test, apply the patch and got to cataloging.

- Edit a record which uses the default framework.
  - Confirm that the Z39.50/SRU search button works correctly to trigger
    the pop-up window.
- Repeat the test with a record which uses a different framework.

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Working again, great!

Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Patch works fine.

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6852 [QA Followup] - Tidy AddItem
Kyle M Hall [Mon, 12 Sep 2016 08:58:02 +0000 (08:58 +0000)]
Bug 6852 [QA Followup] - Tidy AddItem

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 6852: Staged import reports wrong success for items
Marcel de Rooy [Thu, 8 Sep 2016 10:06:05 +0000 (12:06 +0200)]
Bug 6852: Staged import reports wrong success for items

If we import items that have a wrong branch code, the items will not
be imported but manage-marc-import reports them as imported. (A wrong
branch code probably occurs most, but other causes are possible too.)

The underlying cause is that AddItem does not look at the error
returned from _koha_new_item in Items.pm.

This patch deals with that omission in the most economical way. It adjusts
AddItem so that it returns undef if no item was added.
In ImportBatch.pm I check if an item was added and adjust the totals
accordingly instead of just always counting them.

Note: Several scripts like additem.pl use AddItemFromMarc to call
AddItem. They do not report an error, but fail silently. With this patch,
these scripts get undef and will still fail silently. (No change.)
Adding error checks around calls of AddItemFromMarc is outside the scope of
this report. Here we are taking care of correct imported item numbers.

Test plan:
[1] Verify that additem.pl still works by adding a new item.
[2] Run t/db_dependent/Items.t
[3] Add a new branchcode, say XXX.
[4] Pick a biblio record with a few items (n) and set one item to branch XXX.
[5] Export this biblio with items to a MARC file.
[6] Change the XXX item to the original branch and remove branch XXX.
[7] Import the MARC file. Verify that one item was not imported and that
    the number of imported items reflects that (equals n-1).

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 8030 - (QA Folllowup) Use Koha::Libraries
Nick Clemens [Fri, 9 Sep 2016 16:35:49 +0000 (16:35 +0000)]
Bug 8030 - (QA Folllowup) Use Koha::Libraries

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 8030 - (QA followup) Remove svc file no longer user Use animated gif for waiting...
Nick Clemens [Mon, 22 Aug 2016 15:43:57 +0000 (15:43 +0000)]
Bug 8030 - (QA followup) Remove svc file no longer user Use animated gif for waiting as elsewhere Remove confirmation

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 8030 (QA Followup) - Use REST api and provide feedback
Nick Clemens [Fri, 19 Aug 2016 20:51:07 +0000 (20:51 +0000)]
Bug 8030 (QA Followup) - Use REST api and provide feedback

Use REST API
If cancelled return to previous selection
If fail return to previous selection
Use fa spinning icon while waiting
Disable select while waiting

Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 8030 - Change pickup location of a hold from patron record
Nick Clemens [Fri, 1 Jul 2016 19:27:19 +0000 (15:27 -0400)]
Bug 8030 - Change pickup location of a hold from patron record

To test:
1 - Place some holds for a patron
2 - Load the patron into checkout module
3 - View thier holds tab, should have a dropdwon for location
4 - Alter the location
5 - You should recieve a confirmation box
6 - Confirm that pressing cancel does not update holds
7 - Confirm that pressing Yes does update the hold
8 - Confirm that waiting holds are not updateable

Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16911 [QA Followup] - No need to 'use C4::Members'
Kyle M Hall [Fri, 9 Sep 2016 14:52:52 +0000 (14:52 +0000)]
Bug 16911 [QA Followup] - No need to 'use C4::Members'

For some reason, this is causing t/db_dependent/Circulation.t to fail if
run independently.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15758: (QA followup) Remove leftover reference to C4::Branch
Tomas Cohen Arazi [Fri, 9 Sep 2016 15:32:16 +0000 (12:32 -0300)]
Bug 15758: (QA followup) Remove leftover reference to C4::Branch

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 15164 - Allow editing of the invoice number after initial saving
Kyle M Hall [Wed, 17 Aug 2016 13:43:01 +0000 (13:43 +0000)]
Bug 15164 - Allow editing of the invoice number after initial saving

When you notice a typo in your invoice number after finishing with the
receiving process, the only way to correct it right now is in the
database - or by undoing all the steps and starting over.

It would be nice if the invoice number could be edited.

Test Plan:
1) Apply this patch
2) Browse to acqui/invoice.pl for an invoice
3) Note the new "Invoice number" field contains the existing invoice
4) Alter the invoice number
5) Save the invoice
6) Note the invoice number has been updated
7) Edit the invoice again
8) Attempt to save the invoice with an empty invoice number field
9) Note that you cannot save the invoice without having an invoice number

Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 13949 - Item search should have holding library
Owen Leonard [Mon, 15 Aug 2016 18:54:16 +0000 (14:54 -0400)]
Bug 13949 - Item search should have holding library

This patch adds holding library ("current location") to the list of
fields available in the item search form.

To test, apply the patch and go to Search -> Item search.

- Perform a search using the "current location" option and verify that
  it returns the correct results.
- Try other searches to confirm that they work as before.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17211: Remove use of onclick from OPAC fines page
Aleisha Amohia [Mon, 29 Aug 2016 06:33:08 +0000 (06:33 +0000)]
Bug 17211: Remove use of onclick from OPAC fines page

To test:
1) Set the EnablePayPalOpacPayments syspref to Allow and the
PayPalSandboxMode to the appropriate mode
2) Go to OPAC fines
3) Confirm clicking the PayPal image link works the same before and
after the patch (opens pop up window)

Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17193: Remove C4::Search::SearchAcquisitions
Jonathan Druart [Thu, 25 Aug 2016 09:41:52 +0000 (10:41 +0100)]
Bug 17193: Remove C4::Search::SearchAcquisitions

This subroutine is not used and can be removed

Test plan:
  git grep SearchAcquisitions
should not return any results.

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17191: Confirm message on deleting tag in OPAC
Aleisha Amohia [Wed, 24 Aug 2016 20:51:32 +0000 (20:51 +0000)]
Bug 17191: Confirm message on deleting tag in OPAC

Edit: removing use of onclick

To test:
1) Log into OPAC, go to your tags
2) Click Delete
3) Confirm message should pop up
4) Ensure clicking Cancel works as expected, ensure clicking OK works as
expected

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17187 - DBRev 16.06.00.023
Kyle M Hall [Fri, 9 Sep 2016 14:06:17 +0000 (14:06 +0000)]
Bug 17187 - DBRev 16.06.00.023

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17187: Lower the timeout preference from 139 days to 1 day
Marcel de Rooy [Wed, 24 Aug 2016 13:45:54 +0000 (15:45 +0200)]
Bug 17187: Lower the timeout preference from 139 days to 1 day

Default timeout is now 12000000 seconds == almost 139 days !
Surely, your session will be shorter. But we should lower this
value.
Balancing usability and security, I propose 1d (1 day) now.
Current pref value will be affected only if it is NULL or equal
to the old default.

Test plan:
Check your current value. Optionally change to NULL or 12000000.
Run the dbrev and see what happens.
Beware of cached values while testing or flush the cache.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17183: Check if any checkboxes have been checked for 'Delete Selected' button...
Aleisha Amohia [Wed, 24 Aug 2016 03:43:22 +0000 (03:43 +0000)]
Bug 17183: Check if any checkboxes have been checked for 'Delete Selected' button in Koha News

To test:
1) Go to Tools -> Koha News
2) Click 'Delete selected' button without selecting anything
3) Notice you are asked to confirm if you would like to delete ... but
you didn't choose anything to delete
4) Apply patch and refresh page
5) Click 'Delete selected' button without selecting anything
6) Should see alert.
7) Select one or more news items to delete and click 'Delete selected'
button
8) Should be asked to confirm
9) Confirm that the delete works as expected

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17174: Making z39.50 Authority search actions buttons
Aleisha Amohia [Tue, 23 Aug 2016 23:51:43 +0000 (23:51 +0000)]
Bug 17174: Making z39.50 Authority search actions buttons

Have changed the wording of the MARC button to Show MARC to be
consistent with other places in Koha.

To test:

1) Go to Authorities -> New from Z39.50
2) Put in any search terms and click Search
3) Confirm that both options (MARC and Import) now show as buttons "Show
MARC" and "Import" under one "Actions" column with approriate icons
4) Confirm buttons work as expected
5) Confirm buttons do not wrap on narrower browser

Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17165: Improve heading on vendor search when searching for all vendors in Serials
Aleisha Amohia [Tue, 23 Aug 2016 03:28:20 +0000 (03:28 +0000)]
Bug 17165: Improve heading on vendor search when searching for all vendors in Serials

To test:
1) Go to Serials
2) Click New subscription or edit an existing one
3) Click Search for a vendor
4) Make a search that will return no results (i.e. has a typo etc.)
5) Confirm there is an appropriate message
6) Go back and make a search that will return results (i.e. putting in one letter
    'a' etc.)
7) Confirm that heading is worded better and search term is displayed
8) Go back and make search without entering any search terms
9) Confirm that heading is worded better, no search term is displayed

Sponsored-by: Catalyst IT
Patch behaves as dexcribed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17163: Making MARC subfields structure actions buttons
Aleisha Amohia [Tue, 23 Aug 2016 01:28:32 +0000 (01:28 +0000)]
Bug 17163: Making MARC subfields structure actions buttons

To test:
1) Go to Admin -> MARC bibliographic framework
2) Go to Actions -> MARC structure for any framework
3) Click Subfields
4) Confirm Edit and Delete links show as buttons with appropriate icons
in one column called 'Actions'
5) Confirm buttons do not wrap on narrower browser
6) Confirm buttons behave as expected

Sponsored-by: Catalyst IT
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17162: Moving MARC tags structure actions into a drop down menu
Aleisha Amohia [Tue, 23 Aug 2016 01:22:05 +0000 (01:22 +0000)]
Bug 17162: Moving MARC tags structure actions into a drop down menu

To test:
1) Go to Admin -> MARC bibliographic framework
2) Go to Actions -> MARC structure for any framework
3) Confirm that three links, Subfields, Edit and Delete, now show in
drop-down menu with appropriate font awesome icons
4) Confirm that Subfields takes you to the right page and Edit and
Delete work as expected

Sponsored-by: Catalyst IT
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 11921: (followup) Don't die on non-existent koha-conf.xml
Tomas Cohen Arazi [Fri, 9 Sep 2016 14:26:03 +0000 (11:26 -0300)]
Bug 11921: (followup) Don't die on non-existent koha-conf.xml

This patch wraps the XMLin call on an eval block. It also adds unit
tests (mocked) for Koha::Config->read_from_file()

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17161: Add missing td tag
Jonathan Druart [Tue, 23 Aug 2016 12:49:06 +0000 (13:49 +0100)]
Bug 17161: Add missing td tag

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17161: Making 'Preview MARC' links show as buttons in batch record modification
Aleisha Amohia [Tue, 23 Aug 2016 00:02:56 +0000 (00:02 +0000)]
Bug 17161: Making 'Preview MARC' links show as buttons in batch record modification

This patch removes the column heading and makes all links show as font
awesome buttons. I have also changed the wording from Preview MARC to
Show MARC to shorten the button and be consistent with other places in
Koha

To test:
1) Go to Tools -> Batch record modification
2) Put in some record numbers and click Continue
3) Ensure column heading 'Preview' no longer shows, and buttons are
showing with an appropriate icon. Confirm button still works as
expected.
4) Confirm button does not wrap on narrower browser

Sponsored-by: Catalyst IT
Works as described
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16938: Remove the use of "onclick" from batch patrons modification template
Owen Leonard [Mon, 18 Jul 2016 18:44:13 +0000 (14:44 -0400)]
Bug 16938: Remove the use of "onclick" from batch patrons modification template

This patch revises the batch patrons modification template, removing
"onclick" attributes from the markup and defining those events in the
script.

To test you should have at least one extended patron attribute
configured.

- Apply the patch and go to Tools -> Batch patron modification.
- Submit a batch of patrons for modification.
- Confirm that the checkbox next to any required field is disabled.
- Select a date in the registration date and expiry date fields. Confirm
  that the "Clear" link next to each empties the correct field.
- Click "New" next to a patron attibute. A copy of the patron attribute
  line should be created.
- Click "Delete" next to a cloned patron attribute. The correct line
  should be removed.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17110: Add unit test for MaxAge parameter in Token.t
Marcel de Rooy [Fri, 12 Aug 2016 06:09:50 +0000 (08:09 +0200)]
Bug 17110: Add unit test for MaxAge parameter in Token.t

Test plan:
Run t/Token.t

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17110: Lower CSRF expiry in Koha::Token
Marcel de Rooy [Thu, 11 Aug 2016 13:25:44 +0000 (15:25 +0200)]
Bug 17110: Lower CSRF expiry in Koha::Token

Default expiry in WWW:CSRF is one week.
This patch sets it to 8 hours by default in Koha, and allows to
change the expiry period individually by passing MaxAge.

Test plan:
[1] Put items in your cart.
[2] Apply the example patch too.
[3] Send the cart from opac within the allotted 10 seconds.
[4] Send again, but wait some 10 seconds before submitting. Too late!

Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17109: [QA Follow-up] Die when wrong token
Marcel de Rooy [Tue, 16 Aug 2016 12:20:36 +0000 (14:20 +0200)]
Bug 17109: [QA Follow-up] Die when wrong token

Removes template var csrf_error and associated handling.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restested with opac and intranet: Still sends or dies elegantly..

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17109: Use Koha.Preference in sendbasket template
Marcel de Rooy [Fri, 12 Aug 2016 06:29:42 +0000 (08:29 +0200)]
Bug 17109: Use Koha.Preference in sendbasket template

No need to send OPACBaseURL to the template, if you load the Koha TT
plugin inside the template.

Test plan:
Send a few items in your cart from OPAC and intranet.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17109: Add CSRF token to [opac-]sendbasket
Marcel de Rooy [Thu, 11 Aug 2016 12:17:14 +0000 (14:17 +0200)]
Bug 17109: Add CSRF token to [opac-]sendbasket

If you have no (valid) token, you will not be able to send the message.

Test plan:
[1] Verify if you can still send the cart from opac and intranet.
[2] While still being logged in, try to send the cart from opac by
    using the following URL:
    /cgi-bin/koha/opac-sendbasket.pl?email_add=you@somedomain.com&comment=csrf_test&bib_list=doesnotmatter&csrf_token=justsomeguess12345
    This should now result in a csrf error.

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17109: Remove second authentication from (opac-)sendbasket
Marcel de Rooy [Thu, 11 Aug 2016 11:10:21 +0000 (13:10 +0200)]
Bug 17109: Remove second authentication from (opac-)sendbasket

Patch deals with opac and intranet variant.
If we authenticated the first time, it is not necessary to do it
a second time rightaway.

Replaces a call to get_template_and_user (including checkauth) by
gettemplate.

Also removes duplicate use C4::Biblio statements.

Test plan:
[1] Put a few books in the cart.
[2] Send the cart from OPAC.
[3] Send the cart from intranet.

Tested 3 patches together. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17099: C4::Koha - Remove GetSupportName and GetSupportList
Jonathan Druart [Wed, 10 Aug 2016 07:46:33 +0000 (08:46 +0100)]
Bug 17099: C4::Koha - Remove GetSupportName and GetSupportList

Since bug 9468, these 2 subroutines are no longer in used and can be
removed.

Test plan:
  git grep GetSupportName
and
  git grep GetSupportList
should not return entries (unless 1 in release notes)

Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17012 - Remove more event attributes from administration templates
Owen Leonard [Mon, 1 Aug 2016 15:15:33 +0000 (11:15 -0400)]
Bug 17012 - Remove more event attributes from administration templates

There are several administration templates which still contain event
attributes. This patch move event definition to the JavaScript.

To test you must have the SMSSendDriver system preference set to
"Email." Apply the patch and go to Administration.

- In Global system preferences, change the value of any input or select
  and then click the "Cancel" link for that section. After confirming
  your choice, the page should reload with your changes reset.

- In Circulation and fine rules, edit any existing rule. In the editing
  row, click the "Clear" button. The data for that rule should be
  cleared.

- In Transport cost matrix, make any change to the matrix. Submitting
  the form should work correctly.

- In MARC bibliographic framework, choose 'MARC structure' for any
  framework.
  - Checking or unchecking the 'Display only used tags/subfields'
    checkbox should reload the page and change the display according to
    your choice.

- In Did you mean?, make changes to the existing configuration.
  - Clicking "Cancel" should reload the page and discard your changes.
  - Clicking "Save configuration" should correcly save your changes.

- In SMS cellular providers, click to edit any existing provider.
  Clicking the "Cancel" link should cancel the editing process and
  return you to the list of providers.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16995 - Remove event attributes from two include files
Owen Leonard [Thu, 28 Jul 2016 18:33:16 +0000 (14:33 -0400)]
Bug 16995 - Remove event attributes from two include files

This patch removes event attributes from two include files:
cat-toolbar.inc and members-toolbar.inc.

In cat-toolbar.inc an unused <form> tag with an "onsubmit" attribute has
been removed.

To test, apply the patch and:

- View the detail page for any bibliographic record. All toolbar buttons
  ("New," "Edit," "Save," etc.) should work as expected.
- View the detail page for any patron. Click the "Add message" button in
  the toolbar. Selecting a predefined note should correctly populate the
  textarea with your selected message.

Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16981: Add EDI Admin to Acq Menu
Nicole C Engard [Tue, 26 Jul 2016 16:02:32 +0000 (16:02 +0000)]
Bug 16981: Add EDI Admin to Acq Menu

This patch adds the links to EDI Accounts and Library EANs
to the menu on the left of the Acq module.

To test:
* Log in to Koha
* Visit Acquisitions
* Confirm that EDI links show on the menu on the right
  if you have permissions to access EDI.

Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16978 - DBRev 16.06.00.022
Kyle M Hall [Fri, 9 Sep 2016 13:26:20 +0000 (13:26 +0000)]
Bug 16978 - DBRev 16.06.00.022

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16978: Followup - Copy create_report permissions for delete_report
Mark Tompsett [Mon, 1 Aug 2016 23:38:10 +0000 (19:38 -0400)]
Bug 16978: Followup - Copy create_report permissions for delete_report

This patch should deal with comment #6's point of where a user who
has create, but not execute permissions, would lose delete ability.
Users with create and execute permissions would already have delete
as well.

TEST PLAN
---------
 1) Back up db
 2) drop database koha_library;
 3) create database koha_library;
 4) web install with all sample data with system user
 6) log into staff client as system user
 7) make sample koha admin user a superlibrarian
 8) set username and password for sample koha admin user
 9) log out and log in as koha admin
10) Create a user (USER_A) with permissions:
        create_reports   and execute_reports.
11) Create a user (USER_B) with permissions:
        create_reports,  but not execute_reports.
12) Create a user (USER_C) with permissions:
        execute_reports, but not create_reports.
13) Create a user (USER_D) with no report permissions.
14) Run the atomic update.
15) Check USER_A permissions
    -- should have delete_reports
16) Check USER_B
    -- should have delete_reports
17) Check USER_C
    -- should NOT have delete_reports
18) Check USER_D
    -- should NOT have delete_reports
19) run koha qa test tools
20) restore db

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16978: Add delete reports user permission
Mark Tompsett [Tue, 26 Jul 2016 13:50:52 +0000 (09:50 -0400)]
Bug 16978: Add delete reports user permission

This splits off the delete capability from the create reports permission.
From a UI perspective there were CSS issues, that this patch set hackily
bypasses. Perhaps someone else can amend this enhancement with the required
changes so that the extra column at the beginning of the table can be
removed when the user does not have delete capability.

TEST PLAN
---------
1) back up db
2) apply patch
3) ./installer/data/mysql/updatedatabase.pl
   -- should run without issue.
4) in mysql:
   > drop database ...
   > create database ...
   -- totally blanks it for fresh web install
5) run web install
   -- installing should have no issues
6) go to a patron
7) set permissions
8) expand the reports permission
   -- should have delete reports now
9) click help and scroll down to
   'Granular Reports Permissions' right at the bottom.
   -- there should be a new delete_reports section
10) Head over to guided reports and build a few reports.
    -- as system account user, delete stuff should all be visible.
11) Find a patron, set all permissions, except delete reports.
12) log out and then log in as the modified patron
13) Head over the save reports
    -- none of the delete options should be available to the user.
14) run koha qa test tools
15) restore db

Followed test plan. Additionally tried to delete using params in URL
(not possible, OK)
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16968 - Remove the use of "onclick" from serial patron and vendor search templates
Owen Leonard [Fri, 22 Jul 2016 19:24:03 +0000 (15:24 -0400)]
Bug 16968 - Remove the use of "onclick" from serial patron and vendor search templates

This patch removes instances of "onclick" from the serials templates for
patron and vendor search.

To test, go to Serials and click "New subscription."

- In the new subscription form, click the "Search for a vendor" link.
- In the popup, search for a vendor. Confirm that clicking "Choose"
  selects the correct vendor.

- From the detail page of an existing subscription, click "Create
  routing list."
- Search for a patron and test that the "Add" button in search results
  works correctly to add patrons to the routing list.

Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16963 - Remove the use of "onclick" from subscription add template
Owen Leonard [Fri, 22 Jul 2016 15:32:54 +0000 (11:32 -0400)]
Bug 16963 - Remove the use of "onclick" from subscription add template

This patch removes the use of event attributes from the subscription add
template and the template for testing prediction patterns. Events are
now defined in the JavaScript.

To test, go to Serials -> New subscription.

- Test that the "Search for vendor," "Search for record," and "Create
  record" links work correctly.
- Test the "Next" button without entering a vendor or a biblionumber.
  You should be warned about selecting a vendor and biblionumber.
- After selecting a bibliographic record to link to the subscription,
  click the "Next" button. The second section of the subscription add
  form should be displayed.
- Under frequency, choose "1/day."
- Confirm that the "Show advanced pattern" link correctly toggles
  display of the advanced pattern form.
- Under the advanced pattern form, test the "Modify pattern" button. It
  should enable editing in the form.
- Test the "Cancel modifications" and "Save as new pattern" buttons.
- Test the "Test prediction pattern" button.
  - In the "Prediction pattern" box, test that the checkboxes next to
    each day of the week, when checked, trigger the corresponding issue
    number to be marked as "not published."
- Finally, confirm that your subscription is saved correctly.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16950: Serials subscriptions advanced search shows '0 found' pre-search
Aleisha [Wed, 20 Jul 2016 23:39:42 +0000 (23:39 +0000)]
Bug 16950: Serials subscriptions advanced search shows '0 found' pre-search

To test:
1) Go to Serials
2) Click Advanced Search in the toolbar at the top
3) Notice heading says Serials subscriptions (0 found) before a search has even happened
4) Apply patch and click Advanced Search again
5) Heading should now say Serials subscriptions search
6) Submit search
7) Heading should say how many subscriptions your search found (like before)

Sponsored-by: Catalyst IT
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16946 [Revised] Remove the use of "onclick" from several serials templates
Owen Leonard [Wed, 20 Jul 2016 14:51:30 +0000 (10:51 -0400)]
Bug 16946 [Revised] Remove the use of "onclick" from several serials templates

This patch modifies several serials module templates to remove the use
of event attributes. Events will now be defined in JavaScript.

Also changed:

- In Serials -> Check expiration, custom form validation has been
  removed in favor of validation with the plugin.
- In Serials -> Claims, the "Clear filter" button has been replaced with
  a link. Error messages are now styled with the standard "alert" class.
- In Serials -> New subscription -> Search for record, the "choose" link
  is now a Bootstrap button. Pagination links are now styled like other
  similar links. The "Close" button is now styled as in other popup
  windows. The "no results found" messages is styled as an informational
  dialog.
- In Serials -> Subscription -> Edit routing list, the "add recipients"
  and "delete all" controls are now links with Font Awesome icons.

To test, apply the patch and:

- Go to Serials -> Check expiration.
  - Try to submit the form without filling in a date. The form
    validation plugin should warn you that the date field is required.
  - Submit the form using data which will return results.
  - Click the "Renew" button for any result. The subscription renewal
    popup should be triggered for the correct title.

- Go to Serials -> Claims.
  - Select a vendor with missing issues.
  - Confirm that the date filter works correctly, and that the "Clear
    filter" link works.
  - Select one or more result and click the "Send notification" button.
    The notification should be sent.

- Go to Serials -> New subscription.
  - Click the "Search for record" link to trigger the bibliographic
    search popup.
  - Perform a search. Confirm that the "Choose" button selects the
    correct record and populates the fields in the parent window.

- Go to Serials -> Subscription -> Edit routing list.
  - Confirm that the process of adding recipients to the list works
    correctly.
  - Confirm that changing the rank of any recipient works correctly.
  - Save the routing list and click the "Save and preview routing slip"
    button on the confirmation page. The slip preview should open.
  - In the slip preview window, test that the print button works
    correctly.

Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
QA revision: Removed stray '// -->' and corrected clear filter function

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17112: Action buttons for course reserves detail page
Owen Leonard [Tue, 12 Jul 2016 15:55:51 +0000 (11:55 -0400)]
Bug 17112: Action buttons for course reserves detail page

This patch revises the edit and delete buttons on the course reserves
detail page so that they are styled as Bootstrap buttons with Font
Awesome icons.

To test, apply the patch and choose or create a course reserve which has
in it at least one lost item and at least one item which is checked out.

- In the list of items on the course reserve detail page, confirm that
  the 'Edit' and 'Delete' buttons are correctly styled.
- Confirm that for the checked out item the delete button is disabled.
  Hovering over the button should trigger a tooltip. Clicking the button
  should trigger an alert.
- Confirm that for the lost item the same is true.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Buttons styled as Bootstrap. Works as expected.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16937 [Revised] Remove "onclick" from the manage staged MARC records template
Owen Leonard [Mon, 18 Jul 2016 16:20:33 +0000 (12:20 -0400)]
Bug 16937 [Revised] Remove "onclick" from the manage staged MARC records template

This patch revises the manage staged MARC records template, removing
"onclick" attributes from the markup and defining those events in the
script.

To test, apply the patch and go to Tools -> Manage staged MARC records.

- If necessary, stage a MARC file for import.
- Click the name of the staged file and then the "Import this batch into
  the catalog" button. The batch should be correctly imported.
- Return to the list of staged MARC files.
- Click the name of an imported file and then the "Undo import into
  catalog" button. The import should be reverted.
- Return to the list of staged MARC files.
- Click the "Clean" button for any record. Confirm that the batch is
  cleaned.
- For any cleaned record, click the "Delete" button. The batch should be
  deleted.

Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised

QA revision: Corrected class name so that "delete" button triggers the
correct warning.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16908: Koha::Patrons - Remove GetSortDetails
Jonathan Druart [Mon, 11 Jul 2016 21:06:46 +0000 (22:06 +0100)]
Bug 16908: Koha::Patrons - Remove GetSortDetails

This subroutine was only used in one script and its job is the same as
GetAuthorisedValueByCode.
It's better to use the AuthorisedValues TT plugin to retrieve AV
descriptions.

Test plan:
Edit a patron with sort1 and/or sort2 defined.
On the patron details page (members/moremember.pl) you should see the
sort1 and/or sort2 info displayed.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16875: OPAC - removing link to records if authority is not used by any records
Aleisha [Thu, 7 Jul 2016 23:26:12 +0000 (23:26 +0000)]
Bug 16875: OPAC - removing link to records if authority is not used by any records

To test:
1) Do an authority search. Notice that authorities not used by any records have a clickable link (under Biblio records) which redirects to a catalog search with no results
2) Go back to the authority search and click View full heading for an authority with no records. Notice that under the auth name, it says Number of records used in: 0, with a link to a catalog search
3) Apply patch
4) Repeat steps 1 and 2. Authorities not used in any records should no longer have clickable links nd authorities which have records should work as expected.

Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16874: Making serials collections actions buttons
Aleisha [Thu, 7 Jul 2016 22:20:55 +0000 (22:20 +0000)]
Bug 16874: Making serials collections actions buttons

To test:
1) Go to serials -> Search a subscription (or make a new one)
2) Ensure that subscription has an end-date that has passed or will pass soon
3) Go to Serials collection (left sidebar menu)
4) Ensure that Subscription summary table has two buttons, Create routing list and Renew. These buttons should be bolded and the table cell highlighted
5) Ensure 'Print list' is a button in year tables below
6) Edit subscription to have a later end-date (will not expire soon)
7) Go back to serials collection
8) Ensure that table cell is no longer highlighted and buttons not bolded. Renew button should not be there.
9) Ensure that both buttons do not wrap when the browser is narrow

Sponsored-by: Catalyst IT
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16842: Help for EDI accounts
Aleisha [Mon, 4 Jul 2016 01:34:19 +0000 (01:34 +0000)]
Bug 16842: Help for EDI accounts

To test:

1) Go to Admin -> EDI accounts
2) Click Help in top-right corner
3) Confirm that Help window opens with appropriate help text
4) Confirm links work as expected

Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed link to the manual: cat -> acq

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17032 [QA Followup] - Update path to swagger.json file
Kyle M Hall [Fri, 9 Sep 2016 13:00:09 +0000 (13:00 +0000)]
Bug 17032 [QA Followup] - Update path to swagger.json file

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17032: Remove warning "keys on reference is experimental"
Jonathan Druart [Fri, 5 Aug 2016 10:21:34 +0000 (11:21 +0100)]
Bug 17032: Remove warning "keys on reference is experimental"

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17032: Make sure Swagger object definition is up-to-date with Koha-object
Lari Taskula [Wed, 3 Aug 2016 11:55:08 +0000 (14:55 +0300)]
Bug 17032: Make sure Swagger object definition is up-to-date with Koha-object

If a definition in api/v1/definitions/*.json has a corresponding Koha-object by
filename, compare properties of the definition and columns of the Koha-object
and ensure that all columns are defined inside properties of the definition.

To test:
1. Run t/db_dependent/api/v1/swagger/definitions.t
2. See that all of the tests pass. (If not, file a bug report to fix missing
   properties in the Swagger definition.)
3. Remove a property from api/v1/swagger/definitions/patron.json
4. Repeat step 1
5. See that test fails and lets you know that the property you just removed
   is missing from the definition.

Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16841: Help for library EANs
Aleisha [Mon, 4 Jul 2016 01:24:58 +0000 (01:24 +0000)]
Bug 16841: Help for library EANs

To test:

1) Go to Admin -> Library EANs
2) Click Help in top-right corner
3) Confirm that Help window opens with appropriate help text
4) Confirm link to manual works as expected

Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed link to the manual.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 17011 - Remove "onblur" event attribute from some templates
Owen Leonard [Mon, 1 Aug 2016 14:20:00 +0000 (10:20 -0400)]
Bug 17011 - Remove "onblur" event attribute from some templates

Several templates have an "onblur" event attribute in the markup. This
patch moves the onblur event definition into the JavaScript.

To test, apply the patch and clear your browser cache if necessary.

In Administration -> Authority types:

  - Choose "New authority type."
  - Enter any text into the "Authority type" field.
  - Moving the cursor focus away from this field should convert your
    text to uppercase.

In Administration -> MARC bibliographic framework:

  - Choose "New framework."
  - Enter any text into the "Framework code" field.
  - Moving the cursor focus away from this field should convert your
    text to uppercase.

In Administration -> Currencies and exchange rates:

 - Choose "New currency."
  - Enter any text into the "Currency" field.
  - Moving the cursor focus away from this field should convert your
    text to uppercase.

In Administration -> Item types

 - Choose "New item type."
  - Enter any text into the "Item type" field.
  - Moving the cursor focus away from this field should convert your
    text to uppercase.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16738 - Improve EDIFACT messages template
Owen Leonard [Tue, 26 Apr 2016 18:09:58 +0000 (14:09 -0400)]
Bug 16738 - Improve EDIFACT messages template

This patch makes several improvements to the EDIFACT messages template
to make it more consistent with similar interfaces in Koha. Changes to
edimsg.tt are made to simplify the display of the data in a modal.

This patch also corrects a couple of markup errors.

To test you must have multiple rows of data in the edifact_messages
table. I tested with dummy data I inserted manually. Should should have
some rows which use 'QUOTE' and 'ORDERS' as the message_type.

To test deletions you may need to apply the patch for Bug 16737.

- Apply the patch and go to Acquisitions -> EDIFACT messages.
- In the table of messages, the date should be displayed according to
  your system preference.
- Sorting by date should work correctly regardless of date format
  setting.
- The 'Actions' column should contain 'View message' and 'Delete'
  Bootstrap-style buttons with Font Awesome icons. The column should be
  unsorted.
- Clicking the 'Delete' button should prompt you to confirm.
- Clicking the 'View message' button should trigger a modal which loads
  the message data.
- Test the page with no messages or when all messages have been
  deleted. The page should display a standard message dialog instead of
  an empty table.

Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16685 [QA Followup] - Use Path::Tiny::slurp instead of File::Slurp
Kyle M Hall [Mon, 27 Jun 2016 15:56:58 +0000 (15:56 +0000)]
Bug 16685 [QA Followup] - Use Path::Tiny::slurp instead of File::Slurp

Path::Tiny::slurp is considered better to use than File::Slurp.

RM Note: The package version in wheezy is too old, the package version
         in jessie is just fine and should be added to the community
         repo if wheezy will be supported for the coming release.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16685 - Use eval instead of do for .perl atomicupdates
Kyle M Hall [Tue, 7 Jun 2016 14:07:19 +0000 (14:07 +0000)]
Bug 16685 - Use eval instead of do for .perl atomicupdates

If we use eval instead of do for our .perl atomic update files, it will
allow developers to put in the exact code that should go into
updatedatabase.pl. The problem with do is that none of the variables
defined in updatadatabase.pl are available, whereas with eval they are.

Test Plan:
1) Apply this patch
2) Create a .perl file in atomicupdates with the following in it:
say "DBversion: $DBversion";
3) Run updatadatabase.pl
4) Note the output
5) Add a syntax error to your atomic update
6) Run updatedatabase.pl
7) Note the error is displayed

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16586: [QA Follow-up] Simplify code
Jonathan Druart [Mon, 25 Jul 2016 15:10:34 +0000 (16:10 +0100)]
Bug 16586: [QA Follow-up] Simplify code

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended this patch: Replaced none by any. Exists test adjusted.
This effectively makes the test pass.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16586: [QA Follow-up] Add test for two metadata conditions
Marcel de Rooy [Tue, 26 Jul 2016 11:54:31 +0000 (13:54 +0200)]
Bug 16586: [QA Follow-up] Add test for two metadata conditions

Run the test and see..

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16586: Koha Plugins: Limit results of GetPlugins by metadata
Marcel de Rooy [Wed, 25 May 2016 11:37:49 +0000 (13:37 +0200)]
Bug 16586: Koha Plugins: Limit results of GetPlugins by metadata

It would be helpful if we could find a plugin based on some metadata
tag as returned by the plugin. This extends the use of GetPlugins that
already supports searching on method.

GetPlugins is used in: admin/edi_accounts.pl, plugins/plugins-home.pl and
tools/stage-marc-import.pl. The changes in these three scripts are
minimal and just related to parameter passing.

Test t/db_dependent/Plugins.t includes another test for GetPlugins. In this
regard a metadata tag has been added to t/Koha/Plugins/Test.pm.

NOTE: This adjustment will also be used in a redesign for bug 15545.

Test plan:
Run t/db_dependent/Plugins.t.
Enable pref UseKohaPlugins and config var enable_plugins.
Go to plugins-home.pl. Verify that it still lists your plugins.
Bonus: Check edi_accounts or stage-marc-import.pl if you have a working
plugin for that.

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16576 [Revised] Remove the use of "onclick" from label templates
Owen Leonard [Tue, 24 May 2016 13:18:37 +0000 (09:18 -0400)]
Bug 16576 [Revised] Remove the use of "onclick" from label templates

This patch updates several label creator templates to remove the use of
"onclick" in favor of defining click events in JavaScript.

Also changed:
 - Replaced the non-existant element <icon> with <i>
 - Removed the use of <center> and 'align="center"';
 - In the item search results template:
   - The use of the checkboxes jQuery plugin has been replaced with
     straight jQuery for simplicity's sake.
   - Output of table headers has been modified so that translatable
     strings are in the template instead of having English strings
     passed from the script.
   - Moved the 'Add checked' and 'Done' buttons into a floating toolbar.

To test, apply the patch and go to Tools -> Label creator.

- Choose New -> Label batch
  - Click 'Add items'
    - Perform a search for items.
    - Confirm that 'select all' and 'clear all' links work.
    - Confirm that clicking an individual 'Add' button works.
    - Select multiple items and click the 'Add checked' button. Confirm
      that the selected items were added to your batch.
  - Click 'Add items' again to save the selected items to your batch.
  - Test that the 'Delete' and 'Export' buttons next to any item work
    correctly.
- Choose Manage -> Label batches
  - Test that the 'Delete' button works correctly.
  - Select one or more batches and test that the 'Export selected'
    button works correctly.

Revision: Removed changes to pagination in the item search results
template since it didn't work.

Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16507: Show play media tab first if record has no holdings
Aleisha [Thu, 30 Jun 2016 00:03:23 +0000 (00:03 +0000)]
Bug 16507: Show play media tab first if record has no holdings

To test:
1) Go to Admin -> Global sysprefs
2) Turn on HTML5MediaEnabled and HTML5MediaYouTube
3) Go to Cataloging and create a new record
4) Catalogue a YouTube link in 856$u and save record. Do not add any items (click Normal tab)
5) Confirm that Play media tab is the selected tab by default
6) View record on OPAC and confirm Play media tab is selected by default
7) Go back to staff client, add an item then go back to Normal tab
8) Confirm that Holdings tab is now selected by default
9) Confirm Holdings tab is selected by default on OPAC

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16275 - DBRev 16.06.00.021
Kyle M Hall [Fri, 9 Sep 2016 12:04:50 +0000 (12:04 +0000)]
Bug 16275 - DBRev 16.06.00.021

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16275: Do not allow a self registration with an existing email address
Jonathan Druart [Sat, 23 Apr 2016 16:01:24 +0000 (17:01 +0100)]
Bug 16275: Do not allow a self registration with an existing email address

To avoid multiple registrations, it would be good to check the unicity
of the primary email address.
This patchset adds a new pref PatronSelfRegistrationEmailMustBeUnique.
If on, a patron will get "This email address already exists in our
database" if he try to register with an existing email address.

Test plan:
1/ Register a new patron with an email address
2/ Make an other registration using the same email address
=> With the pref PatronSelfRegistrationEmailMustBeUnique on, you won't be allowed
=> With the pref off, no change should be noticed.

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors.

Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16275: Add the new pref PatronSelfRegistrationEmailMustBeUnique
Jonathan Druart [Sat, 23 Apr 2016 15:45:04 +0000 (16:45 +0100)]
Bug 16275: Add the new pref PatronSelfRegistrationEmailMustBeUnique

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors

Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272 - DBRev 16.06.00.020
Kyle M Hall [Fri, 9 Sep 2016 11:53:32 +0000 (11:53 +0000)]
Bug 16272 - DBRev 16.06.00.020

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272 [QA Followup] - Indexer fails on indexing temparary testing records
Kyle M Hall [Thu, 18 Aug 2016 16:33:00 +0000 (16:33 +0000)]
Bug 16272 [QA Followup] - Indexer fails on indexing temparary testing records

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272: Add description for tests
Jonathan Druart [Tue, 16 Aug 2016 15:59:38 +0000 (16:59 +0100)]
Bug 16272: Add description for tests

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272: (follow-up) Specific case when switching an on-site checkout to a regular...
Jonathan Druart [Tue, 16 Aug 2016 15:52:27 +0000 (16:52 +0100)]
Bug 16272: (follow-up) Specific case when switching an on-site checkout to a regular checkout

Same as previous patch but if another circ rule exists

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272: Specific case when switching an on-site checkout to a regular checkout
Jonathan Druart [Thu, 21 Apr 2016 20:42:11 +0000 (21:42 +0100)]
Bug 16272: Specific case when switching an on-site checkout to a regular checkout

In the case on-site checkouts are considered as a regular checkout in issuing
rules (i.e. ConsiderOnSiteCheckoutsAsNormalCheckouts is on):
When after the on-site checkout the maximum limit of checkouts is
reached and the patron wants to switch an on-site checkout to a regular
checkout, the C4::Circulation::TooMany subroutine will return a
TOO_MANY_CHECKOUTS error.
To avoid that, we need to allow an extra checkout in this subroutine.

Test plan:
0/ Switch ConsiderOnSiteCheckoutsAsNormalCheckouts and
SwitchOnSiteCheckouts on
1/ In the issuing rules, set the total number of checkouts (maxissueqty)
to 2 and the number of on-site checkouts to 2 (maxonsiteissueqty)
2/ Check 2 items out ticking the 'on-site checkout' checkbox
3/ Check one of these items out, to automatically switch it to a regular
checkout
=> The checkout should be allowed.

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
8 years agoBug 16272: Automatically switch an on-site checkout to a regular checkout when checke...
Jonathan Druart [Thu, 21 Apr 2016 10:00:20 +0000 (11:00 +0100)]
Bug 16272: Automatically switch an on-site checkout to a regular checkout when checked out

Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.

Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout

Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>