Martin Renvoize [Thu, 21 Apr 2022 11:52:32 +0000 (12:52 +0100)]
Bug 30576: Use DefaultPatronSearchFields in patron search
This patch corrects the handling of the 'Standard' search field in
patron searches such that it accurately reflects the contents of the
DefaultPatronSearchFields system preference and falls back to a hard
coded list instead of always using the hard coded list.
To test:
1) Empty the contents of DefaultPatronSearchFields systempreference
2) Perform a patron search from the header search
3) Inspect the patrons API request and note that we search on the
default fallback fields of firstname, surname, othernames,
cardnumber and userid (and some extended attributes which are
historically hard coded).
4) Navigate to the memebers-home by clicking the 'Patrons' button from
the main page
5) Perform another search using the filters on the left with 'Standard'
selected.
6) Note the same list of search fields used as above in the patrons API
request.
7) Update the DefaultPatronSearchFields systempreference adding one or
more borrower fields in a comma delimited list.
8) Repeat steps 2 -> 6 but this time upon inspecting the API request you
should find that only the fields in your DefaultPatronSearchFields
list are searched (along with the hard coded extended attributes
list).
9) Signoff
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 27 Apr 2022 10:34:11 +0000 (12:34 +0200)]
Bug 30626: Fix test
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 27 Apr 2022 10:33:03 +0000 (12:33 +0200)]
Bug 30626: DT REST API wrapper - Fix general search
The general search query is not built correctly.
Say you have a table with column filters, like the main patron search:
General filter: henry
Specific filter on the 'Name' column: h
The generated query will be (= are actually LIKE):
{ Column1="henry" AND Column3="henry", ...} AND { Column2="h" }
The first term does not contain the Column2 attribute.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 28 Apr 2022 07:43:06 +0000 (09:43 +0200)]
Bug 30630: Prevent crash on check-in if HoldsAutoFill is ON
RevertWaitingStatus has already removed the itemnumber from the hold, passing $itemnumber (from scanned item) should work, as it will reattach the hold to the item
Test plan:
1 - Enable HoldsAutoFill
2 - Place a title level hold
3 - Check in an item and confirm hold
4 - Switch to another branch
5 - Checkin the item
Without this patch you got
Can't call method "biblionumber" on an undefined value at /kohadevbox/koha/C4/Reserves.pm line 1577.
at /kohadevbox/koha/C4/Reserves.pm line 1576
With this patch applied the operation succeeds
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 4 Mar 2022 16:19:35 +0000 (16:19 +0000)]
Bug 24001: Fix Card template/rpinter profile creation and edit
This patch adjusts the template/profiles to use the default of '0'
This should probably be NULL, and the columns foreign keys, this code
could use a further rewrite, but this should fix a long standing bug
To test:
1 - Using the fresh install, with all the sample data.
2 - Go to Home › Tools › Patron card creator › Templates
3 - New > Card template
4 - Save
5 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'profile_id' at row 1
6 - Edit an existing template
7 - Save
8 - Error: Can't bless non-reference value at /kohadevbox/koha/C4/Creators/Profile.pm line 89
9 - Create a new 'Printer profile'
10 - Save
11 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'template_id' at row 1
12 - Apply the attached patch.
13 - Verify you can create a new 'Card template' and 'Printer profile' with no errors
14 - Verify you can edit and save both of the newly created objects above
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Blou [Tue, 30 Jun 2020 16:50:09 +0000 (12:50 -0400)]
Bug 24001: Fix patron card template edition
Error when saving Patron card Template:
Can't bless non-reference value at
/home/vagrant/kohaclone/C4/Creators/Profile.pm line 89
This is caused by the profile dropdown offering invalid choices and is
fixed by adding a filter to limit options to creator = 'Patroncards'.
The UI already handles the case where no valid profile is avaiable.
Signed-off-by: Alexis Ripetti <alexis.ripetti@inLibro.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29092: Add timestamp to account-fines table column settings
Table settings for the account_fines table (in the Patrons section, the
"Transactions" table in a patron account) are missing a checkbox for the
"Updated On" column. Because of this, one cannot hide the Updated On
column and any other values one sets here get applied to the wrong
columns.
This patch adds timestamp to account-fines column settings.
To test:
1) Navigate to columns settings page and modify account-fines tables
column.
=> Note that if you hide e.g. account_type column, column
credit_number is hidden on patrons account page
2) Apply patch and update database.
=> Account-fines column settings has now a option to hide timestamp.
=> Correct columns should now be hidden.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Fri, 18 Feb 2022 20:44:14 +0000 (10:44 -1000)]
Bug 30136: Add back to top button to OPAC
Like in many websites, when scrolling down the page make a button appear to go back to top.
This can be very useful specially in search results page.
This patch adds to OPAC using Javascript a button with id "backtotop".
Button appears when 300 pixels from top are hidden.
This value may be adapted.
Test plan
1) Go to OPAC
2) Perform a search with many results
3) Scroll down
=> Back to top button appears
4) Manually scroll back to top
=> Button disappears
5) Scroll down and click on Back to top button
=> You get to top
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 12 Jan 2022 14:47:59 +0000 (15:47 +0100)]
Bug 29648: Remove default sort order for detail
On the detail view the number of columns changed, we cannot use the
default sort order here.
It certainly can be done on a different way but I prefer to postpone it
for now and see later.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 16 Dec 2021 13:07:05 +0000 (14:07 +0100)]
Bug 29648: Item lost report - no change
hum, there is no sort on this table, so it's displayed like it's coming
from the controller, but perl code does not sort either.
This could be improved and we could make it configurable easily
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 16 Dec 2021 11:48:57 +0000 (12:48 +0100)]
Bug 29648: Catalogue detail - no default_display_length
On the acquisition table the sort option is not available as we don't
offer the ability to selection asc/desc and default to asc.
We cannot offer default_display_length for those tables.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 16 Dec 2021 11:11:57 +0000 (12:11 +0100)]
Bug 29648: Order search view - normal
"normal" means that we are expecting the table to have the 2 options
implemented and working.
You can select "Default display length" and "Default sort order"
in the "table settings" administration view, then go the the view
and confirm that the table has the configured values pre-selected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 16 Dec 2021 10:50:58 +0000 (11:50 +0100)]
Bug 29648: Move NumSavedReports to the table settings
The syspref NumSavedReports can be moved to the table settings config
Test plan:
1. Set the syspref to a given value
2. updatedatabase # execute the atomic update
3. Go to the table settings page and confirm that the syspref's value
has been retrieved
4. Select a specific colonne for the default sort
5. Go to the report list view and confirm that the "Show X entries" has
the correct selected value and that the table is sorted as you expect.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 16 Dec 2021 10:34:02 +0000 (11:34 +0100)]
Bug 29648: Improve existing code
We already have 2 tables that are configurable, on acqui/basket and
reports/orders_by_budget.
This patch is modifying a bit the existing code to transfer the
responsability/logic to the KohaTable constructor instead of the
template that is creating the object.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch reinstates the authorised value 'qualif'
to it's corresponding place
This authorized value is used in UNIMARC default bibliographic
framework.
To test:
1) Do a clean install or load the YAML file
2) Verify 'qualif' authorised_value is present in subfield $4 of
fields 700/1/2/3, 710/1/2/3, 720/1/2/3 and 730
This authorized value is used in UNIMARC default bibliographic
framework.
To test:
1) Do a clean install with optional files or load the YAML file
2) Verify new SUGGEST values are in the database
SELECT * FROM authorised_values WHERE category = 'SUGGEST';
This patch adds UNIMARC relator codes into
mandatory auth_values.yml
This authorized value is used in UNIMARC default bibliographic
framework.
To test:
1) Do a clean install or load the YAML file
2) Verify new language codes are in the database
SELECT * FROM authorised_values WHERE category = 'qualif';
This patch adds language codes (ISO 639-2) into
mandatory auth_values.yml
This authorized value is used in UNIMARC default bibliographic
framework.
To test:
1) Do a clean install or load the YAML file
2) Verify new language codes are in the database
SELECT * FROM authorised_values WHERE category = 'LANG';
This patch adds COUNTRY codes (ISO 3166-1) into
mandatory auth_values.yml
This authorized value is used in UNIMARC default bibliographic
framework.
To test:
1) Do a clean install or load the YAML file
2) Verify new country codes are in the database
SELECT * FROM authorised_values WHERE category = 'COUNTRY';
Nick Clemens [Wed, 22 Sep 2021 12:55:19 +0000 (12:55 +0000)]
Bug 29077: Remove blank indexes before convert
To test:
1 - Be using Elasticsearch
2 - Search on OPAC with dropdown set to 'Library catalog'
3 - Warns in plack-opac-error.log
4 - Apply patch
5 - Repeat
6 - No warns
7 - Search returns correct results
Adam Styles [Fri, 4 Mar 2022 00:22:38 +0000 (11:22 +1100)]
Bug 30224: Show correct important field in cataloguing validation
This patch fxes the cataloguing validation messages to show the correct tag, when the whole field is important (not just a subfield).
Note: Look at Bug 30159 to fix the formatting of the validation popup.
1. Go to Administration -> MARC bibliographic frameworks
2. Click Actions next to a framework, view MARC structure
3. Edit multiple tags (at least 2) and check the Important checkbox.
4. Go to cataloguing and create a new record using the framework you just edited
5. Don't fill any of the important fields. Click Save to force the validation for the important tags
6. Notice that the error message shows that an important field isn't filled, but the tag number shown is repeated for each message. The 'Go to field' link goes to the right tag, but the tag number shown is incorrect.
7. Apply patch and refresh page
8. Click Save to force validation again.
9. Confirm the correct tag number is now showing for each error message.
Sponsored-by: Education Services Australia SCIS Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 7 Apr 2022 09:36:00 +0000 (09:36 +0000)]
Bug 30482: Potential for bad string concatenation in cataloging validation error message
In validating the basic MARC editor form before submission, we run
AreFieldsNotOk() twice (once with the parameter "false") and concatenate
the result for output. This creates the potential for the error string
to be appended with "0" if AreFieldsNotOk() returns false.
This patch improves the logic around building the error string.
To test, apply the patch and make sure one of your MARC frameworks
contains at least one mandatory field and at least one important field.
- Edit or create a MARC record in the basic MARC editor.
- Submit the form in various states of completion:
- If a mandatory and an important field are empty, you should see two
error messages at the top. "The following mandatory subfields aren't
filled" and "The following important subfields aren’t filled."
- If a mandatory OR an important field is empty, you should see a
single message.
- If it's the important field which is empty, a confirmation will
ask if you want to save the record anyway. Test that both answers
to this confirmation work correctly.
- If no mandatory or important fields are empty the form should
submit.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Run:
$ kshell
k$ cd misc/translator
k$ perl translate update es-ES
2. On your git checkout run:
$ git diff | grep '\[% limit or'
=> FAIL: That shouldn't be translated
3. Run:
$ git reset --hard HEAD
4. Apply this patch
5. Repeat 1 and 2
=> SUCCESS: No attempt to translate that tag
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 2 Mar 2022 16:21:41 +0000 (16:21 +0000)]
Bug 30191: Authority search result list in the OPAC should use 'record' instead of 'biblios'
This patch updates the OPAC authority search results page so that it
uses the term "record" instead of "biblio."
The patch also changes how the template outputs the count of records so
that it is correctly pluralized, e.g. "1 record" vs. "2 records."
To test, apply the patch and perform an authority search in the OPAC.
In the search results, confirm that the last table header reads
"Records." The information in that column should be correct, using the
word record or records.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30534: Remove guarantor_id attribute from the patron object
This patch removes an attribute that was actually removed 3 years ago
and causes an exception when trying to search for it. The API responses
don't include it anyways.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Fri, 8 Apr 2022 08:22:05 +0000 (10:22 +0200)]
Bug 30405: Reduce font-size for address in patron search result
The address has a font-size: 110%, it's not needed here, 100% is enough.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 15 Apr 2022 11:45:08 +0000 (11:45 +0000)]
Bug 29155: (follow-up) Work around change to jQueryUI tab API
For some reason, with the combination of jQuery 3.6.0 and jQueryUI
1.13.1, the way to access the current active tab's link has changed.
Previously the tab activate event would provide information about the
link as "ui.newTab.context." It appears that "context" is no longer
available.
This patch updates the two instances in Koha where this process is
broken.
To test, apply the patch and check out to a patron with holds on their
account.
- When the checkout page loads, confirm that each tab loads its contents
correctly when clicked.
- Check that the correct tab is activated when you append the tab link
to the page url, e.g.
Owen Leonard [Thu, 3 Feb 2022 17:38:44 +0000 (17:38 +0000)]
Bug 29155: Update links to jQuery and jQuery Migrate files
With these patches, jQuery versions in the OPAC and staff interface are
both updated to 3.6.0. The latest version of jQuery Migrate is installed
to allow us to take a slower approach to updating out-of-date syntax.
To test, apply the patch and try as many pages as you can, paying
attention to the browser console to watch for errors.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 21 Apr 2022 17:23:14 +0000 (19:23 +0200)]
Bug 30584: Fix ES mapping creation
We need to tell DT that we are adding/removing row, not only deal
manually with the DOM.
This patch also fixes the following bug: if you add or remove a row from
the "biblio" tab, then go to another tab and back to "biblio", all
changes were gone (bug existed prior to bug 29893).
Test plan:
Add, edit and remove mappings, switch from tabs and save.
Use the filters, save (29893 regression test)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Tue, 10 Aug 2021 22:03:58 +0000 (12:03 -1000)]
Bug 28840: Better texts in batch record modification/deletion
Tools batch record modification/deletion form contains texts in legends, labels, hints.
I feel like :
Labels are sometimes too long, showing them on multi-lines, like "Modify record using the following template". Long texts should be in legend or hint.
Legend are sometimes contains redundant text, like in tabs.
Also I propose to use "record id" instead of "record number".
Test plan :
Compare texts in page without and with patch
Nick Clemens [Wed, 25 Aug 2021 15:26:23 +0000 (15:26 +0000)]
Bug 28371: Passpreviously fetched branches and itemtypes through and fetch all needed AV at once
This patch updates the searchResuls code to pass through the pre-constructed branches and itemtype lookups
to XSLTParse4Display to avoid repeating this
It also updates getAuthorisedValues4MARCSubfields to fetch the values for mapped subfields and pass
then through to transforMarc4XSLT
Note that we currently blank invalid branches and itemtypes - I presrve this, we should open another bug
if we want to change this behaviour
Changes are covered by tests
To test:
1 - Perform searches in OPAC and staff client that return many records
2 - Use the 'Network' tab on the browser console (opened with F12 usually) to see the time taken
3 - Note the speed before the patch
4 - Apply patch
5 - restart all the things
6 - Note improvement in speed
**Note: The improvement is more drastic the more items per record, try adding large numbers of items to your search results to test**
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by switching updated_on to datetime. Remove NOT NULL, etc.
Copied dbrev to atomicupdate folder.
Resulted in:
Updated all NULL values of borrowers.updated_on to GREATEST(date_renewed, dateenrolled, lastseen): 51 rows updated
Jonathan Druart [Fri, 22 Apr 2022 09:42:09 +0000 (11:42 +0200)]
Bug 30595: Prevent update_child_to_adult.t to fail randomly
t/db_dependent/selenium/update_child_to_adult.t .. # Looks like you planned 3 tests but ran 2.
# Failed test 'Update child to adult'
# at t/db_dependent/selenium/update_child_to_adult.t line 132.
# Looks like you planned 3 tests but ran 2.
# Looks like you failed 1 test of 2 run.
t/db_dependent/selenium/update_child_to_adult.t .. 1/1
# Failed test 'Update child to patron'
# at t/db_dependent/selenium/update_child_to_adult.t line 153.
Cannot wait more for element '//input[@type="submit"]' to be visible at /kohadevbox/koha/t/lib/Selenium.pm line 189.
It happens when there are too many patron's categories and the submit
button is not in the viewport.
Test plan:
Run t/db_dependent/AuthoritiesMarc_GetTagsLabels.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Thu, 31 Mar 2022 13:38:07 +0000 (15:38 +0200)]
Bug 27253: Fix definition of updated_on in borrowers and deletedborrowers
Test plan:
1. First you have to be in a state where updated_on is NULL-able. You
can do that by either:
a) do a fresh install of Koha 16.05 and update to master, or
b) execute the following SQL queries:
ALTER TABLE borrowers MODIFY updated_on timestamp NULL
DEFAULT current_timestamp() ON UPDATE current_timestamp()
COMMENT 'time of last change could be useful for synchronization
with external systems (among others)'
ALTER TABLE deletedborrowers MODIFY updated_on timestamp NULL
DEFAULT current_timestamp() ON UPDATE current_timestamp()
COMMENT 'time of last change could be useful for synchronization
with external systems (among others)'
2. Create two borrowers (let's name them X and Y)
3. Delete borrower Y
4. Set the column updated_on to NULL for both borrowers by executing the
following SQL query:
UPDATE borrowers SET updated_on = NULL WHERE borrowernumber =
<borrowernumber of X>
UPDATE deletedborrowers SET updated_on = NULL WHERE borrowernumber =
<borrowernumber of Y>
5. Apply patch and run updatedatabase
6. Verify that borrowers.updated_on and deletedborrowers.updated_on are
not NULL-able.
Verify that updated_on for X and Y have taken the value of
dateenrolled.
7. Repeat step 2 to 6 but this time renew the patron and/or log in with
its account in order to set the columns borrowers.date_renewed and
borrowers.lastseen before executing updatedatabase
borrowers.updated_on should take the greatest value among
dateenrolled, date_renewed, and lastseen
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes some markup from the search results template which
was causing markup to be output on the screen. Rather than correct the
markup so that the "p1" class is correctly added to the relevant links
I'm removing it. The "p1" class isn't used anywhere.
The patch also corrects two incorrect template filters on one of the
page's links.
To test, apply the patch and enable the following system preferences:
- Perform a catalog search in the staff interface which will return
results with cover images from each of the enabled services.
- The covers should show correctly in the search results with no markup
being output on screen.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 21 Apr 2022 14:30:24 +0000 (16:30 +0200)]
Bug 30583: Fix hold system for translated templates
There are missing quotes, and the translate script is messing up with
the generated template.
Error is:
Template process failed: file error - parse error - holds_table.inc line 216-217: unexpected token (hold)
The generated line, without this patch is:
216 <td><input %]="%]" class="printholdslip" data-reserve_id="[%" hold.reserve_id="hold.reserve_id" html="html" name="printholdslip" type="button" value="Recibo" |="|"></td>
With this patch applied:
216 <td><input class="printholdslip" data-reserve_id="[% hold.reserve_id | html %]" name="printholdslip" type="button" value="Recibo"></td>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We got
Can't call method "value" on unblessed reference at /kohadevbox/koha/opac/opac-messaging.pl line 86
$cookie can be an arrayref, we should retrieve the session id using
CGI->cookie('CGISESSID')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log