David Cook [Wed, 6 Aug 2014 05:25:17 +0000 (15:25 +1000)]
Bug 12720 - Turn off Authority logging when running "bulkmarcimport.pl"
This patch turns off the AuthoritiesLogging syspref when running the
bulkmarcimport.pl script.
It also temporarily disables the syspref caching which will have
been making the CataloguingLogging handling ineffectual. (That is,
updating the CataloguingLogging syspref in the script wouldn't
have an effect as the original cached value would be used anyway.)
_TEST PLAN_
0) Turn on "AuthoritiesLogging" syspref
1) Load an authority record using bulkmarcimport.pl
2) Note a new Authorities entry in action_logs
3) Apply the patch
4) Repeat Step 1
5) Note that no new entry is made in action_logs
(Bonus points: Do the same thing with CataloguingLogging and a
bibliographic record.)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with biblio and auth imports.
Work as described, no koha-qa errors.
Note: If you begin to load a big file and get impatient and hit ^C,
seems that current syspref value is lost...
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Patch copies what was already done for the CatalougingLog, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12800: running unit tests that use Koha::Cache breaks cache usage from Apache
If the user runs:
$ prove t/Cache.t
with it's system user, two situations can happen:
1) If MEMCACHED_NAMESPACE is set on koha-httpd.xml other than the default 'koha', then
Apache sets /tmp/sharefile-koha-<namespace> and the problem is not present: running
the test creates /tmp/sharefile-koha-koha != /tmp/sharefile-koha-<namespace>
=> SUCCESS: no problem
2) If MEMCACHED_NAMESPACE is not set (or eq 'koha'), then there is a permission problem
either running the unit tests, or when using any funcitonality on the UI that needs
Koha::Cache.
Explanation: the one that is run first will set the /tmp/sharefile-koha-koha ownership
so it will be either the dev's sys user, or www-data (or whatever apache is using).
This patch sets a namespace for the unit tests, so there is no collision.
To test:
- On your dev setup, having MEMCACHED_NAMESPACE unset on koha-httpd.conf
- Edit a marc framework. If it fails, remove /tmp/sharefile-koha-koha, and try again
-> fixed. Now try running
$ prove t/Cache.t
=> FAIL: test fails because of permission problem
- Apply the patch
- Re-run the test
=> SUCCESS: test passes
Try changing the order, etc.
The temporary file that is used is deleted after the tests are run.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 7143: update the es-ES translation attribution as of 3.12 onwards
The currently maintained stable releases translations are/were done by
the following individuals and it should be acknowledged in the about page.
This patch also removes the venezuelian spanish translation, that was removed
long time ago.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 7143: Universidad Nacional de Cordoba is an institution that contributed to Koha
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ohloh.net links are used in the about page. Their FQDN has changed a while ago.
Old one is still redirected, but we need to fix it just in case the redirection
is removed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Kyle M Hall [Thu, 31 Jul 2014 15:28:44 +0000 (11:28 -0400)]
Bug 12507 - News does not always display in staff or OPAC
News will not display on the last day of each month due to the
way the date is calculated in the SQL code for grabbing news.
Test Plan:
1) Create a news item that should display
2) Change your server's date to the last day of the month
3) Note you can no longer see that news item
4) Apply this patch
5) Note you can now see your news item again
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 19 Jun 2014 14:01:03 +0000 (16:01 +0200)]
Bug 12453 - Do not use by default Host-Item-Number in UNIMARC
Actually, in default UNIMARC install, 461$9 is indexed as Host-Item-Number, meaning it is used for analytical itemnumber.
But most UNIMARC catalog use the analytical relation using unimarc_field_4XX.pl plugin on 461$a. In fact, this plugin is defined in default UNIMARC frameworks.
If Host-Item-Number is defined but 461$9 is used for something else, it will lead to odd bugs. For example, records containing analytical items can not be deleted.
This patch comments the 461$9 indexing in UNIMARC zebra config.
Test plan :
- Create a fresh UNIMARC install
- Create a record with 461$9 containing a value
- Index the record
- Perform a search on Host-Item-Number : ccl=Host-Item-Number,alwaysmatches=''
=> Without the patch you get a result
=> With the patch you get no result
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Code is clean, commenting out all the indexing of 461$9.
Trusting the author that this is the correct thing to do :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 22 Jun 2014 17:31:50 +0000 (19:31 +0200)]
Bug 12465: Improve display of MARC21 710 in intranet and OPAC
Currently, 710$a and $b and $b will not display correctly.
This patch tries to improve the display adding the missing
space between both subfields.
Please test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested, work as described on staff & opac for 710 detailed view.
Add space and punctuation.
No errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sean Hamlin [Fri, 25 Jul 2014 02:51:35 +0000 (14:51 +1200)]
Bug 12576: Make the more/fewer options and "new search" links on the advanced search page look better.
How to test:
1/ Visit /cgi-bin/koha/opac-search.pl
2/ Assert the "More/Fewer options" buttons look like bootstrap default buttons
3/ Assert the "New search" button looks like a bootstrap default button
4/ Assert the visited colour of the buttons remains #333 (light grey)
5/ Assert the buttons still function as expected
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Fri, 15 Aug 2014 19:16:45 +0000 (21:16 +0200)]
Bug 12776: Capitalization: Confirmation messages in circulation
Changes:
- Yes, renew (Y)
- Yes, check out (Y)
- No, don't check out (N)
- No, don't renew (N)
To test:
- Verify changes by reading the code
- Check out an item that requires confirmation
Example: Patron owes fines or test with bug 12776.
- Verify confirmation messages show up correctly.
- Check item out again to trigger renewal
- Verify confirmation message shows up correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12545: Add EditorConfig.org file to the source tree
This patch adds a .editorconfig file to the source tree, that
enforces some of our coding guidelines.
Some editors try to detect the desired configurations from the currently
opened file. As we have tons of old code that doesn't follow our current
coding guidelines, this can lead to unintended QA problmes.
To test:
- Apply the patch
- Verify the .editorconfig file is in the top-level directory
- See the .editorconfig file expresses our coding guidelines
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 15 Aug 2014 16:45:44 +0000 (12:45 -0400)]
Bug 12371 - Links in every patron self-registration email points to a single borrower
If multiple registrations are submitted, the first patron to register
will be used for the first patron to click the registration confirmation
link!
Test Plan:
1) Submit 2 new patron registrations
2) Use the confirm link from the 2nd registration
3) Note you end up registering as the first submitted registration
4) Apply the patch
5) Repeat steps 1 and 2
6) Note you are now confirmed correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test plan appears to work fine, I have a feeling the sql could be
written better but can't come up with it on a Sunday morning
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a critical bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Tue, 19 Aug 2014 09:02:47 +0000 (11:02 +0200)]
Bug 12784: Patron cannot change his personal details
This patch fixes the regression introduced by the bug 12623 : a patron cannot change his personal details from OPAC.
Test plans :
In order to test this patch, first you have to apply the patch of bug 12781
a1/ Login with a user in OPAC
a2/ Request some modification (surname for example)
a3/ Repeat 2/
a4/ There are no errors
b1/ Register a new user from OPAC with the syspref :
PatronSelfRegistrationVerifyByEmail with the value "Require"
b2/ There are no errors
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works as expected, passes tests and QA script.
Note: The second patron modification request
of one patron will overwrite his/her first request.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12781: update_dbix_class_files.pl should use the preserve_case option
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes make sense, tested by confirming that a patron
modification request for B_<columns> no longer results in
an error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 12 Jul 2014 12:22:53 +0000 (14:22 +0200)]
Bug 8539: Library transfer limits page has incorrect permission
Without this patch the library transfer page required the
'borrowers' permission, which is not quite right for a page
in the administration module.
This patch changes the permission to 'parameters_remaining_permissions'
To test:
Verify the page is accessbile with:
- superlibrarian
- administration (full)
- administration, remaining permissions (without manage_circ_rules)
Verify the page is not accessible without all of those permissions.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Sun, 17 Aug 2014 22:44:04 +0000 (18:44 -0400)]
Bug 4162 - Followup: only count potential barcodes
The $lines_read++; was before the code which skipped empty
lines. By moving it after the next unless $barcode; code, the
$lines_read variable only counts potential barcodes, and does
not include empty lines.
TEST PLAN
---------
1) Apply patch.
2) Attempt a valid barcode file with empty lines.
-- The potential barcode count should exclude the empty lines.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Empty lines are now no longer counted as potential barcodes.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Sat, 12 Jul 2014 13:42:52 +0000 (09:42 -0400)]
Bug 4162 The inventory tool lacks validation for barcodes
The inventory tool had no form of validating on what was assumed
to be a valid barcode number.
To solve this, an extra loop to read before processing was added.
This allows to validate length and content. By using a check
of \p{Print}, this includes Unicode characters such as umlauts,
but excludes unusual control characters.
The template was modified to accomodate validation messages
related to the length and content errors. Additionally, it says
how many "barcodes" were read. Barcodes are supposed to be on
separate lines.
TEST PLAN
---------
1) Attempt to select a file which does not contain barcodes and
is not a text file.
-- a horrible lack of validation and spamminess ensues.
2) Apply patch
3) Create three files.
a) One containing valid barcodes on each line
-- this file should trigger no errors. Attempt a valid
barcode with an umlaut.
b) A copy of the first with an extra line of >20 characters
(e.g. The Quick Red Fox Jumped Over The Brown Fence^A^B^C)
-- this file should trigger the singular error message case.
^A^B^C are actually CTRL-A,CTRL-B,CTRL-C, and it is left
as an exercise to the reader to add them to the line.
c) A copy of the second with the last line duplicated
-- this file should trigger the plural error message case.
4) Attempt each of the three files.
5) Run koha-qa tools.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I have a feeling that the column size could be better fetched from
Koha::Database. But it is an improvement in functionality signing off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Another thing for another day:
Empty lines are counted for the potential barcodes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, tried with arab strings, umlauts and no regressions found.
David Cook [Mon, 20 Jan 2014 02:52:38 +0000 (13:52 +1100)]
Bug 11244: (follow-up) Fix $dateonly flag
At the moment, $dateonly is set to true when $1 is defined. However,
since the regex capture group only includes the time, this flag will
only be set when there is a value that includes a time.
In effect, this means that timestamps are reduced to dates only,
while dates have 00-00-0000 added to them.
This patch keeps the logic but reverses the values, so that $dateonly
will default to true unless $1 is defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Nov 2013 14:01:55 +0000 (15:01 +0100)]
Bug 11244: notices ignoring the dateformat preference
Overdue notices are using the MySQL date format and not the dateformat
in the system preferences.
Test Plan:
1) Enable checkout notices for a patron, make sure the date due is in
the notice.
2) Check out an item to that patron, note the date is in the mysql
datetime format
3) Apply this patch
4) Check out another item to the patron, not the date is now in the
preferred date format.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I love this patch! It is the best solution to this problem that I've
seen. I think it is set up to perfectly handle dates in the notices.
Unfortunately, the $dateonly flag is backwards, so the time is stripped
from timestamps and 00:00:00 is added to dates without times.
I'm adding a follow-up to reverse the setting of this flag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12782: (followup) skip tests that fail because of provider's error
It seems that XISBN is failing sometimes, if you run the tests a couple
of times in a row. An error 500 is raised by lwp.
This problem should be trapped and related tests skipped. Because too much
noise could make people pay no attention to this tests failing.
To reproduce:
- Run the tests several consecutive times:
$ prove -v t/db_dependent/XISBN.t
=> FAIL: XISBN test will fail eventually, printing a networking-related warning.
- Apply the patch
- Repeat the test
=> SUCCESS: when XISBN the networking/connection refused problem arises, the test
is skipped, and it still passes.
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12782: t/db_dependent/XISBN.t fails in DOM setup
To test:
- Have a DOM setup
- Run
$ prove -v t/db_dependent/XISBN.t
=> FAIL: Can't call method "field" on an undefined value at .... C4/Search.pm ...
- Apply the patch
- Run
$ prove -v t/db_dependent/XISBN.t
=> SUCCESS: Tests pass.
- Sign off
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 28 Jul 2014 22:21:17 +0000 (00:21 +0200)]
Bug 1561 - z39.50 results do not show search terms
This patch adds a line with search terms results window of z39.50 search.
To test:
- In staff client, go to cataloging.
- Click 'New from z39.50'
- Do a search
- Your search terms should display at the top of the results page.
- Repeat search with several combinations of search terms (with and without results).
- Check the output for correct html.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, fixed one tab.
Something similar would be nice for the results in the Z39.50 search
in acq as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Thu, 10 Apr 2014 05:11:50 +0000 (17:11 +1200)]
Bug 11842 - fix framework caching with memcache/plack
This changes the existing framework caching, which was using memoisation
if memcached was available, and memory in all cases, to use the
Koha::Cache system. This uses memcache if possible, and in-memory
otherwise. However it also clears the cache when the framework updates,
making sure that the changed version will be picked up.
Note that the in-memory cache clears itself after 10 seconds, so that if
memcached isn't available, this is the longest that old versions will
hang around.
Test plan:
* work through
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11842#c0
and make sure that the erronious result doesn't occur.
Note:
* The patch on bug 12041 is required for this to work.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 20:06:40 +0000 (16:06 -0400)]
Bug 12589 - Manage label batch view should show item type description instead of code
When viewing the list of items in an existing label batch the item type
code is shown. This patch modifies the template to show the item type
description instead.
To test, go to Tools -> Labels -> Manage batches. If necessary, create a
batch with multiple items of different item types. Edit the batch and
confirm that the table of items shows item type description instead of
code.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12694: Remove CGI::scrolling_list from unimarc_field_4XX.pl
There are two instances on this file, but they are not used.
I suppose is old code that was left dangling.
Both scrolling_list, CGIPublisher and CGIitemtype, are not
used on unimarc_field_4XX.tt nor any other file.
Just removed from file two useless db queries.
To test:
1. Apply the patch
2. If you have unimarc config, just go to one of the
fields that use this plugin.
If you don't, can edit you framework and change the plugin
for a tag, e.g. 007. Then save fw, search and edit a record,
clic to open plugin on 007 tag, check that works but don't
save the original record, finally revert your changes.
There must be no functional changes, is unused code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified plugin still seems to work:
- item type pull down shows up correctly
- search works and choosing a record will fill subfields
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12704: Remove CGI::scrolling_list from unimarc_field_225a.pl
This patch removes the only instance in this file
To test:
1. Apply the patch
2. If you have UNIMARC, search for a record, edit it,
and go to tag 225
If you don't, edit your framework and connect this
pluging to some tag/subtag
3. Clic on the plugin link. If you don't have any record
that correspond to the search, can remove the commented
line to have something to play
4. The collection pulldown was replaced, check that works,
select a value and press Ok
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, tested according to test plan.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 15:18:59 +0000 (10:18 -0500)]
Bug 12432 - Saved reports tabs not working
In release 3.14.05.000 the tabs on the Saved Reports page worked
correctly but after upgrading to 3.16.00.000 the tabs stop working.
Visually the tabs change but the table of reports is not filtered. There
are no errors reported in the browser console.
Test Plan:
1) Attempt to filter saved reports by group tabs
2) Note no matter the tab you select, all reports appear
3) Apply this patch
4) Repeat step 1
5) Note the reports are now filtered correctly
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described with the
second patch applied as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11614: Untranslatable label_element_title in label management
This patch makes those strings translatable.
Title now depends on element, all on TT file,
removed from pl file
To test:
1. Apply the patch
2. Go to Tools > Label creator
3. Clic on Manage layouts, templates, profilesor batches,
title of currently available must show with fixed
capitalization
4. Update translation languages and check new entries
msgid "Currently available batches"
msgid "Currently available layouts"
msgid "Currently available profiles"
msgid "Currently available templates
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12695: Remove CGI::scrolling_list from marc21_linking_section.pl
Same situation as Bug 12694.
There are two instances on this file, but they are not used.
I suppose is old code that was left dangling.
Both scrolling_list, CGIPublisher and CGIitemtype, are not
used on marc21_linking_section.tt nor any other file.
Just removed from file two useless db queries.
To test:
1. Apply the patch
2. Can't remember how to trigger this plugin.
You can edit you framework and change the plugin
for a tag, e.g. 007. Then save fw, search and edit a record,
clic to open plugin on 007 tag, check that works but don't
save the original record, finally revert your changes.
There must be no functional changes, is unused code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan successfully. The behavior of the plugin window
appears to be unchanged after applying the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amending the test plan a bit: The plugin was added by bug 8185
- not dead code at all :)
In order to test:
- Edit one of your frameworks, make 773 atwxz9 visible.
- Link 773 $9 to the marc21-linking-section plugin
- Create a new record in cataloguing
- Search for a your host item record (parent)
- Link it
- Observe that the subfields have been filled with information
from the other record
$w = 001 from the parent
$9 = biblionumber from the parent
$t = Title
$x = ISSN
...
Still works with the patch applied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 16 Aug 2014 08:10:31 +0000 (20:10 +1200)]
Bug 7143 Updating the about page
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 16 Aug 2014 08:02:03 +0000 (20:02 +1200)]
Bug 7143 Updating history
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Mon, 4 Aug 2014 03:49:56 +0000 (13:49 +1000)]
Bug 12708 - Unexpected behaviour in IE 9 and lower when using openWindow
This patch removes the whitespace from arguments to the "name" parameter
in "window.open". It also adds a trap for the "openWindow" helper
function, which will use a "null" instead of a "name" if window.open
isn't able to handle a name with whitespace (i.e. if it's IE <= 9).
_TEST PLAN_
1) Switch to an emulated or authentic Internet Explorer version E 9
or lower
2) Click "Help"
3) Note that it opens the page in the current window rather than as a popup
4) Apply the patch
5) Shift refresh your page
6) Click "Help"
7) Note that it now opens (correctly) as a pop-up
(If you want to be more thorough, you can test in other browsers as well
to make sure that it still works.)
Tested with IE 10 developer tools: IE7, IE 8, IE 9
Window pops up as expected. No regression found with IE 10 / FF31.0 Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested for regressions in Firefox and Chromium.
I checked the help and the duplicate authorities windows
still work correctly.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 30 Oct 2013 09:50:13 +0000 (10:50 +0100)]
Bug 9180: All branches should be returned if a default rule exists
The C4::Overdues::GetBranchcodesWithOverdueRules routine has a bug.
If a default rule *and* a specific rule exist, only the branchcode for
the specific rule is returned.
Test plan:
prove t/db_dependent/Overdues.t
and verify the unit tests are consistent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1. Check no regressions on authority editor,
new/edit/save
2. Check new line on translation files, update
a language, look for 'Tag editor'
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked various features of the authority edtior:
- repeating subfields
- deleting subfields
- changing the order of subfields
- linking a subfield to an authorised value
- plugins
No regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Fri, 25 Jul 2014 10:23:58 +0000 (12:23 +0200)]
Bug 12501: Show dissertation note (MARC21 502) in XSLT results
Bug 9356 added the dissertation note from MARC21 502 to the staff
and OPAC detail pages. This patch adds it to the result list.
1) Catalog a record with 502
Examples: http://www.loc.gov/marc/bibliographic/bd502.html
2) Important: Wait until the record got indexed by Zebra or
index it manually.
3) Verify your note shows up on the detail pages in staff and OPAC
4) Verfiy note also shows up on the result pages in staff and OPAC
5) Hide the dissertation note from display:
OpacUserCSS:
.diss_note {
display:none;
}
IntranetUserCSS:
.diss_note {
display:none;
}
6) Verify CSS works and all looks like before...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as describes, value can be hidden using css,
no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12753: Warnings in t/SIP_Sip.t could be tested
A C4::SIP warning is expected and should be tested.
To test:
- Run
$ prove -v t/SIP_Sip.t
=> FAIL: A warning is printed to STDOUT
- Apply the patch
- Run
$ prove -v t/SIP_Sip.t
=> SUCCESS: No warnings on STDOUT, a new test verifying the warning is added.
- It was an easy one, smile and sign off :-D
Sponsored-by: The Will to Procrastinate Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Sponsored-by: Sunday TV is boring Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Sponsored-by: Avoiding distance study homework Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 19 May 2014 11:01:58 +0000 (07:01 -0400)]
Bug 12287 - Hold priority for new hold incorrect if record has holds in transit
When placing a new hold, the listed priority for the hold will be
incorrect if there are any holds with items in transit ( i.e. found = T ).
Test Plan:
1) Place 3 holds on a record with at least 2 items
2) Fill one hold so it is marked as waiting
3) Fill on hold so it is marked as in transit
4) Begin placing a new hold
5) Note the expected priority would be 2, but is actually 3
6) Apply this patch
7) Reload the patch, now the expected priority shows correctly
Signed-off-by: Coralie Barsacq <c.barsacq@mairie-laciotat.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 27 Jul 2014 12:02:02 +0000 (14:02 +0200)]
Bug 12658: Wording of link text and translatability inside JavaScript
This patch changes 'Select all frameworks' to 'Select all sample data' and exposes it to translation through function _().
To test:
Apply first patch.
See "Select all frameworks" on Webinstaller > Step3
Apply second patch
Text changes to "Select all sample data"
Check translation
Check for JavaScript errors
http://bugs.koha-community.org/show_bug.cgi?id=12658 Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes link text and also makes it translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sean Hamlin [Fri, 25 Jul 2014 01:55:48 +0000 (13:55 +1200)]
Bug 12658: Installter step 3 - select framework "select all" button, labels and misc HTML formatting issues.
To test:
1/ Visit /cgi-bin/koha/installer/install.pl?step=3&op=selectframeworks
2/ Assert you can see a link "Select all frameworks" (with JavaScript enabled)
3/ Assert when you click the "Select all frameworks" link all checkboxes are now ticked on the page
4/ Assert when you click on the text next to a checkbox, that it will toogle the corresponding checkbox (accessibility)
5/ Assert there is less unclosed HTML tags on the page (should be none on the select framework page now)
6/ Assert the installer still functions as expected for a clean install
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Link says "Select all frameworks" perhaps "Select all options" or "Select all" would be clearer, but seems to work as desired
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 27 Jul 2014 18:30:47 +0000 (20:30 +0200)]
Bug 4231 - Placing holds from cart fails silently
This patch adds a more meaningfull message if multiple biblios with no
items attached are in the cart.
To test:
- Add biblios with and without items to cart
- Go to cart, select all and click 'Place hold'
Without patch, message reads:
Cannot place hold: this record has no items attached.
With patch, message reads:
Cannot place hold: one or more records without items attached.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Trivial string fix. Message is better than before.
Bug 11504: Untranslatable "Item Type" or "Collection Code" in branch transfer limits
This patch makes reported strings translatable.
To test:
1. Go to Administration > Library transfer limits
2. Depending on the value of BranchTransferLimitsType
your may see in a box:
a) For *all* Collection codes:
b) For *all* Item types:
change system preference to show both values
3. Update translation files for your preferred language
check new entry
msgid "%sCollection codes%sItem types%s: "
Not pretty but can be translated.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have to confess that I lower cased the collections and item
types as they appear in a sentence.
No other changes made and this works nicely.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12716: Allow the import patrons form have drop-downs and datepickers
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 28 Jul 2014 21:36:01 +0000 (17:36 -0400)]
Bug 12666 - Fix poor HTML from circ/offline.tt
In koha-tmpl/intranet-tmpl/prog/en/modules/circ/offline.tt
- Cleaned up the HTML's missing </div>'s
- Corrected the autobuffer attribute to the newer preload one
- Added into empty title, since it will get replaced
TEST PLAN
---------
1) Run the circ/offline.pl page source through an HTML validator
-- should get a few warnings
2) Apply patch
3) Recheck page source (confirm your page isn't cached!)
-- should be clean
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves HTML validity, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 13 Aug 2014 16:54:30 +0000 (12:54 -0400)]
Bug 12091: HTML from auth_subfields_structure.tt doesn't pass firefox's html validator
This cleans up the HTML in auth_subfields_structure.pl and
auth_subfields_structure.tt by:
- fixing some attributes
- removing some attributes
- and using a handy-dandy validation plug-in that Owen pointed
me at the other day.
TEST PLAN
---------
1) Install HTML Validator Plugin (Html Validator 0.9.5.8 Firefox addon)
2) Log in to staff client
3) Koha administration
4) Authority types (on the right, 5 down from Catalog header)
5) Click 'MARC structure' of any auth type
6) Click 'subfields' (I believe for any Tag >= 010)
7) Click 'Edit subfields'
8) Right click and select 'View Page Source'
-- Lots of HTML validation errors
9) View the 'Authorized value:' and 'Thesaurus:' drop down lists.
-- Patch cleans up code, so lists should remain unchanged
after applying patch
10) Apply the patch
11) Refresh the page (make sure it isn't cached!)
12) Right click and select 'View Page Source'
-- It should be down to 10 errors / 11 warnings.
NOTE: I think this means there is a code problem with
actually editing authorities properly!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, much less validation errors, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CÃleans up code, also removes SQL in favor of using a method.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12707: Remove CGI::scrolling_list from some Reports
This patch removes similar instances on 5 files, same code.
Also removes a commented one, changed in case some plan to
resurrect the code.
This bug depends on Bug 12696.
In all cases but the commented one, what was replaced
is a pulldown with one value, 'CSV'
To test:
1. Apply patch for Bug 12696
2. Apply this patch
Check for the pulldown 'Into an application'
3. Go to Reports > Statistics wizard > Borrowers
4. Go to Reports > Statistics wizard > Circulation
5. Go to Reports > Statistics wizard > Holds
6. Go to Reports > Top lists > Most-circulated items
7. Go to Reports > Inactive > Patrons who haven't checked out
8. There is also a commented code on catalogue_stats, no fuctional
changes.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12706: Remove CGI::scrolling_list from serial_stats.pl
This patch depends on Bug 12696
Removed one instance in this file.
Pulldown with one value, 'CSV'
To test:
1. Apply the patch for Bug 12696
2. Apply this patch
3. Go to Reports > Statistics wizard > Serial
4. Check 'Into an application' pulldown, with value 'CSV'
5. Search for regressions
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12696: Remove CGI::scrolling_list from C4/Reports.pm
This patch removes only instance in this file.
Problem is that there are many template files
involved. Most of them have other instances of
scrolling_lists but is a problem for other bugs,
they will depend on this.
What is replaced is a pulldown for delimiter choices.
In all but one case the code is the same (variable name change),
and I did a little tidy of the TT code
To test:
1. Apply the patch
In all the following cases, check delimiters pulldown (Output box, bottom right)
2. Go to Reports > Statistics wizard > Acquisitions
3. Go to Reports > Statistics wizard > Patrons
4. Go to Reports > Statistics wizard > Catalog
5. Go to Reports > Statistics wizard > Circulation
6. Go to Reports > Statistics wizard > Serials
7. Go to Reports > Statistics wizard > Holds
there is a bug here, pulldown next to this must show 'CSV' option,
but shows nothing. Will be fixed
8. Go to Reports > Other > Average loan time
9. Go to Reports > Top lists > Patron checking out the most
Here there is a 'Delimiter' label before delimiters, only case
10. Go to Reports > Top lists > Most-circulated items
11. Go to Reports > Inactive > Patrons who haven't checked out
There is and inconsistency here, name of option on reports page,
and name on this report, 'Patrons with no checkouts'
Followed test plan. Pulldowns display as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12745: Add a sanity check for QueryParser configuration on about.pl
Currently there's no way for the user to know he has a bad QueryParser configuration.
Koha would just fallback to not using it.
This patch adds a check for QueryParser configuration sanity in about.pl
To test:
- Have UseQueryParser = "Don't try"
- Go to More > About Koha > System information
- No QueryParser-related warnings
- Set UseQueryParser = "Try"
- Go to More > About Koha > System information
- On a normal setup you shouldn't have any QueryParser-related warnings
- Edit your koha-conf.xml file and change the queryparser_config entry to a
non-existent filename.
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you the filename used, and says it failed.
- Now just delete the entry in koha-conf.xml
- Reload More > About Koha > System information
=> SUCCESS: a warning message tells you don't have the queryparser_entry in
your koha-conf.xml file.
Subtest:
a - The file /etc/koha/searchengine/queryparser.yaml exists:
=> SUCCESS: a warning saying it used a fallback is shown
b - The file doesn't exist
=> SUCCESS: Missing entry warning, plus a failure message for the fallback.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the typo in the path (non existing file), 'no warnings' is stil shown
below the warnings. The follow-up fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 26 May 2014 19:50:16 +0000 (07:50 +1200)]
Bug 12529: Add a syspref to make overdue notices respect holidays
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12683: (followup) use the Koha.Preference plugin and add ids
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Tue, 12 Aug 2014 14:21:56 +0000 (10:21 -0400)]
Bug 12683: Follow-up, adding div tags around NoLoginInstructions
Button in pop-up displays now as expected.
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12683: Use NoLoginInstructions to customize text for OPAC user/pass information
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8938: Transport cost matrix script and template contain untranslatable strings
This patch fixes the problem reported.
To test:
1) Apply the patch
2) Update translations for your preffered language, xx-YY
3) Check new entries
egrep -Rn "Cost must be expressed as a decimal number|Invalid value for" misc/translator/xx-YY*
4) Check no regression on alert, go to
Administration > Transport cost matrix
Edit some value and put a negative value & save,
alert must show up
5) On errors, part of the error string is now on TT file,
no regressions expected here
Verified that changes appear in translated language (de-CH) as appropriate. No regressions found by testing en en de-CH. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, entering a numeric value < 0 and non-numeric values, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12621: Z39.50-targets - Record type is untranslatable
This patch makes displayed record types translatable
To test:
1) Go to Administration > Z39.50 servers
2) On column Record type the value is 'biblio' or 'authority'
3) Apply the patch
4) Reload the page, now record type must show 'Bibliographic'
or 'Authority'
5) Update translation file for a language, verify new entries
Strings are already on translation file, only a reference
for new entry on the file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The same fix needs to be used for the 'Supplemental issue' part.
To test, use the same test steps used for the previous followup,
but choose "Arrived" in the 'Supplemental issue' row.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the display of items information
following changes on previous patch.
To test:
1. Go to serials
2. Add a subscription
3. Receive an issue
4. Change status to Arrived
Item information display correct labels,
but no pulldowns, that's the bug
5. Apply the patch
6. Reload page, change to Arrived again,
this time pulldowns must be right
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
As Katrin suggest:
- check the manual history box in one of your subscriptions
- go to the subscription detail page, on the planning tab is the
link to the manual history (bit hidden)
There is the typo, fixed now.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes typo correctly, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Wed, 30 Jul 2014 07:12:44 +0000 (09:12 +0200)]
Bug 12749 - Better translatability for list module
This patch changes wording of explanations in list module to make them better translatable.
Additionally, it removes explanation for "Open list" from help screen, because this choice is not available.
To test:
Go to Home > Lists > Public lists > Create new list
Verify that the text changed to "Private list:..." rsp. "Public list:..." in right part of screen and on help screen.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrollinglist from marctagstructure.pl
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC editor)
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Do not we need an AuthorisedValues.pm? (on C4 or Koha)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrollinglist from authorised_values.pl
This patch removes the only instance in this file.
Also fixes array sorting, removes some tabs, removes
an unneeded $dbh handler (there is a global one).
Makes use of C4::Koha::GetAuthorisedValueCategories.
To test:
1. Apply the patch
2. Go to Administration > Authorised values
3. Replaced pulldown next to 'Show category' must
show all (present & system) categories correctly ordered.
4. Select some and check for regressions, e.g. CCODE, Bsort2, YES_NO
no changes must be observed
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 766: Remove CGI::scrolling_list from aqplan.pl
This patch removes 3 occurences on aqplan.pl
To test:
1. You need a budget and a fund
2. Apply the patch
3. Go to Aquisitions, click on your fund
4. Select one of the options on pulldown Planning
e.g. "Plan by months"
5. Now to the left there are two boxes, Filter and Export
a) Filter: (1) pulldown below 'Select planning type'
check that works selecting other values and submit
This pulldown showed originally code types,
untranslatable BTW. Added a TT block to allow translation
and shows legends that match Planning pulldown, but not
the order.
b) Export: pulldowns for filetype (2) and delimiter (3)
Those have originally one value each, and for me Export
does not work, before or after patch, but check that
pulldown exist.
Notes:
A) 5.a) I can change de order of main Planning pulldown,
is harcoded. The values for Filter pulldown are sorted on
aqplan.pl. Is one or the other.
If desired, TT block can be moved to includes/budgets-admin-toolbar.inc
(where hardcoded Planning lives)
B) 5.b) Moved 'Export' legend inside it's box, like Filter.
C) Finally: there is something strange, before or after patch.
There is an empty option 'Planning by " if you select planning
using main pulldown, it disappears if you select planning using
Filter (not a mistery, using Planning fills $auth_cats_loop,
using Filter submit button does not)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks like this needs more work, but no regressions found that were
caused by the patch.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 17:02:25 +0000 (13:02 -0400)]
Bug 9013 - Cart in staff interface displays location pulled from Description (OPAC)
When the cart in the staff client pulls description data for
items.location and items.ccode it pulls the value designated for the
OPAC--probably a cut-and-paste error when the feature was added to the
staff client.
This patch removes the 'opac' parameter from GetKohaAuthorisedValues.
To test you must have at least one LOC authorized value configured to
have different descriptions for staff and OPAC. Locate or edit an item
with that shelving location and add that record to the cart in the staff
client.
When you view the cart, the shelving location description in the "Items"
column should show the description for the staff client, not the OPAC.
Signed-off-by: Nick Clemens <nick@debian> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 1 Aug 2014 18:58:35 +0000 (14:58 -0400)]
Bug 12693 - colspan calculation done by members/statistics.pl should be moved to template
It is not necessary for the patron statistics script to pass a colspan
value to the template. The number can be output using Template::Toolkit
syntax.
To test, view the statistics page for a patron. Confirm that the "Total"
cell in the footer spans the correct number of columns. Test with
various numbers of fields in the StatisticsFields system preference.
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 18 Jul 2014 18:18:12 +0000 (14:18 -0400)]
Bug 7944 - attribute error could be clearer
If you try to create a patron and enter an extended attribute value
which is required to be unique but exists in another record the error
you receive is not clear. It uses the attribute code instead of the
description. This patch adds description to the output.
To test you must have ExtendedPatronAttributes enabled.
- Edit or create an extended patron attribute and designate it a unique
identifier.
- Edit a patron and add a value to that attribute.
- Edit another patron and try to add the same value.
You should get an error which includes both the description of the
attribute you tried to modify and the value you submitted.
Signed-off-by: Christopher Brannon <christopher@debian.brannon.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and Qa script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Thu, 7 Aug 2014 08:29:37 +0000 (10:29 +0200)]
Bug 12727 - Patron category filter in batch patron deletion tool is broken
After commit 6973e3b7d50777a147a29f2f3d213a6175c9eb74, patron category
filter in batch patron deletion tool (tools/cleanborrowers.pl) doesn't
work properly any longer. It's still possible to choose a patron
category as selection criterion, but this criterion is being
efectivelly ignored on futhers steps.
As a result, all patrons (with no check-outs and no outstanding
account balance) may get mistakenly deleted when using this tool,
despite their respective categories.
To test:
1/ apply patch
2/ follow the test plan[s] for Bug 11975
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines AddModification and ApproveModifications uses DBIx::Class instead of C4::SQLHelper.
Moreover, the tests has been wrapped in a transaction.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Koha_borrower_modifications.t
3) The result has to be a success without error or warning :
t/db_dependent/Koha_borrower_modifications.t .. ok
All tests successful.
Files=1, Tests=14, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.60 cusr 0.08 csys = 1.72 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 21 Jul 2014 09:03:12 +0000 (11:03 +0200)]
Bug 12700 - Capitalization: "Close Help Window" in context help
To test:
- Open help in any page of staff client
- In help popup window, see wrong capitalization in button 'Close Help Window'
- Close the popup window
- Apply patch
- Check again: Button now reads "Close help window'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we're using the $query_type variable to detect if this pre-built
query is PQF, we need to use PQF syntax (rather than QueryParser
syntax) when adding to the query. I've made a lot of notes of somewhat
incoherent notes on Bugzilla talking about PQF, CCL, and QP syntaxes,
but I'm hoping to refine these notes on a wiki page for future
reference.
_TEST PLAN_
1) Set 'Suppress in Opac' (ie 942$n) to 1 for one record
2) Re-index Zebra
3) Set 'OpacSuppression' to 'Hide'
4) Set 'UseQueryParser' to 'Do not try'
5) In the staff client, do a search that will return that suppressed
record as well as a few records that are NOT suppressed
6) Note that you can return that suppressed record in the staff client
7) Do the same search in the OPAC
8) Note that the suppressed record doesn't appear
9) Set 'UseQueryParser' to 'Try' && re-run the OPAC search
10) Note that no results appear (the logs will probably mention a
ZOOM error)
11) Apply patch
12) Re-run the OPAC search
13) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing (it's important that you are
getting some results...as ZOOM errors are silent in the UI).
14) Set 'UseQueryParser' to 'Do not try'
15) Re-run the search
16) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - hidden records are hidden.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Wed, 12 Mar 2014 17:43:20 +0000 (17:43 +0000)]
Bug 10542: Fix QueryParser with OpacSupression
OpacSupressions manipulates the query string after the buildQuery
call and so breaks with queryParser enabled. This patch adds
checks for queryParser and manipulates the query before passing it
to buildQuery if it is enabled, but leaves the post buildQuery
manipultation when queryParser is disabled
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Adding a sing after test
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12647: PQF QueryParser driver and unit tests fixes
Due to Perl 5.18, QueryParser the default search class is no longer
'keyword' (see bug 12738), and needs to be set manually. This patch
adds a line that does that. The problem that gets fixed is with test
'super simple keyword query'.
The rest of the non-deterministically failing tests are due to the same
problem, keys returning differently sorted keys from hashes.
So this patch sorts keys in the step that concatenates attributes when building
the PQF queries (and tests get adjusted to match the now deterministic result).
I did that (sorting there) under Jared's recommendation. Hopefuly he will step
in and comment/fix any mistake I made. My main concern was a possible loss
in performance. That we agreed it is almost void, because of the tiny size
of the hash.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests are passing now again :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12738: C4::Context should set 'keyword' as the default search class
On a Perl 5.18 environment (e.g. Ubuntu 14.04 LTS):
To reproduce:
- Have UseQueryParser == "Don't try"
- Perform a search typing just a word that would have many matches on your Zebra db.
- Take note of the search results count.
- Make sure you have the queryparser.yaml file in your config dir.
- Set UseQueryParser == "Try"
- Perform the same search a couple of times
=> FAIL: Notice that the search results count differs from one run to the other.
- Run the regression tests
$ prove -v t/db_dependent/QueryParser.t
=> FAIL: tests fail
To test:
- Apply the patch
- Run tests
$ prove -v t/db_dependent/QueryParser.t
=> SUCCESS: tests pass
- Repeat the steps 'To reproduce'
=> SUCCESS: Search results count is deterministic :-D
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Now search with QueryParser always returns the correct number of
results on a system with the newer Perl version.
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12738: (regression tests) C4::Context should set keyword search as default for QueryParser
This patch introduces tests for the QueryParser PQF driver usage in Koha. Specifically its
initialization on C4::Context, and initial setup.
It also introduces a .pl script that is used to load C4::Context with different hash randomization
seeds on purpose, to verify the initialization result is deterministic and consistent between
runs.
To test:
$ prove -v t/db_dependent/QueryParser.t
It should fail because different default_search_class is set on each run, and it is not often the
one we expect.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Viktor Sarge [Thu, 19 Jun 2014 09:13:14 +0000 (10:13 +0100)]
Bug 5672: Gives RSS icons to catalog search history placed to the left of saved searches
Test plan:
* Verify that there is no RSS icons for saved searches in opac
* Install the patch
* Verify that there is no RSS icons for saved searches and searches for the current session in Opac.
* Test that the RSS links produce the expected result.
Note: I left out authority searches since I have very little experience with authority searches and didn't feel I could test it properly. Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Viktor Sarge [Tue, 17 Jun 2014 08:15:40 +0000 (09:15 +0100)]
Bug 5672: Gives RSS icons to catalog search history
This patch adds an extra column to the table for the search history (this session and previous searches) with RSS icons for each search.
Test plan:
* Verify that there is no RSS icons for saved searches in opac
* Install the patch
* Verify that there is no RSS icons for saved searches and searches for the current session in Opac.
* Test that the RSS links produce the expected result.
Note: I left out authority searches since I have very little experience with authority searches and didn't feel I could test it properly. Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Fri, 18 Jul 2014 08:50:34 +0000 (09:50 +0100)]
Bug 12600: remove duplicate use statement from code
A use C4::Charset was added deep in the body of the code
we have already imported it at the top of the file
(the by convention normal place) As use is executed at compile time
specifying it in the code body does not serve a
useful purpose and detracts from the readability of an already
overly complex subroutine.
Remove the superfluous statement
also removed the tabs introduced to the surrounding lines
by the same commit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Search still works, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 11 Jul 2014 15:16:38 +0000 (11:16 -0400)]
Bug 5502 - Patron card category search field should be menu
When searching for patrons to add to a patron card creator batch there
is a text input field for submitting a patron category. This should be a
dropdown menu. This patch corrects it.
To test, go to Tools -> Patron card creator and click "New batch."
- Click the "Add item(s)" button.
- Confirm that in the Patron search pop-up window there is a dropdown
menu populated with existing patron categories.
- Confirm that searches limited by patron category return correct
results.
- Confirm that the correct patron category is automatically preselected
after performing a search limited by category.
- Confirm that reordering the table of search results works correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8148: (regression tests) C4::Auth_with_ldap needs unit tests
This followup provides some unit tests for C4::Auth_with_ldap. It implements
regression tests for this bug's changes too.
The aim was to cover all use cases for checkpw_ldap from the first line up to
those touched by this bug's patches. It should serve as a start for having
unit tests for the LDAP thing.
Having said that: no excuses for not providing regression tests for LDAP from now on :-/
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8148 - LDAP auth_by_bind doesn't fallback to local auth
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédérick [Wed, 19 Feb 2014 15:59:59 +0000 (10:59 -0500)]
Bug 8148: Only update the password if the LDAP password field was mapped
http://bugs.koha-community.org/show_bug.cgi?id=8148 Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédérick [Wed, 19 Feb 2014 16:55:35 +0000 (11:55 -0500)]
Bug 8148: Prevent local authentification fallback if an invalid LDAP password was entered.
http://bugs.koha-community.org/show_bug.cgi?id=8148 Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
0) Put an item in hold for pickup;
1) In Circulation -> Holds awaiting pickup, validate email (column Patron);
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and will use the first valid email address.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11673: columns.def has swapped last and first name of alt contact
To test:
- Create a new guided circulation report
- On the field list scroll to "Alternate contact: Last name"
=> FAIL:
"Alternate contact: Last name" relates to borrowers.altcontactfirstname
"Alternate contact: First name" relates to borrowers.altcontactsurname
- Apply the patch, restart the creation of the report
=> SUCCESS:
"Alternate contact: First name" relates to borrowers.altcontactfirstname
"Alternate contact: Surname" relates to borrowers.altcontactsurname
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Patch behaves as expected Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 27 May 2014 13:25:02 +0000 (09:25 -0400)]
Bug 4045 - No check for maximum number of allowed holds.
Re-add the system preference maxreserves.
All the code using maxreserves is still in place. Though it
is not used in the Reserves module, it is used in all the
scripts where holds are placed.
Also adds a check so that a borrower cannot exceed the maximum
number of allowed holds by using the multi-hold feature via
the opac.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Set maxreserves to 3, set opactheme to bootstrap
4) Log into the opac as a patron
5) Place 3 holds
6) Attempt to place a 4th hold
7) Note you get an error message and cannot place a forth hold
8) Delete two of those holds
9) Attempt to place 3 or more holds as a multi-hold
10) You should see a warning that you cannot place this many holds
11) Try to anyway
12) You should see an alert to tell you to reduce the number of holds
you are placing.
13) Reduce the number for holds you are placing to 2
14) Your holds should now be placed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 21 Jul 2014 10:25:21 +0000 (12:25 +0200)]
Bug 12699 - Capitalization: All Libraries in pull down on news tool page
To test, got to tools > news
- In pulldown and in table, "All Libraries" should now read "All libraries"
- Create additonal news for "All libraries". Pull down in form should read "All libraries" as well
- Make sure that news for "All libraries" diesplay correctly where they should (in OPAC and Staff client)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 29 Jul 2014 19:08:33 +0000 (15:08 -0400)]
Bug 12635 - Course reserves item list should use "Checked out" instead of "On Loan"
When viewing the list of items on a course reserve list, if the item is
checked out it is indicated by the phrase "On Loan." The default
templates should always use "checked out" instead of "on loan." Also
corrected: the capitalization of "Item Lost."
To test, Course Reserves must be enabled and you must have an existing
course reserves with items on it, one of which should be checked out.
View the list of items on that Course Reserve and confirm that the table
says "Checked out."
Table in staff client displays "Checked out" / "Item lost" Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12686: Make more selected option XHTML compliant
This patch fixes several occurrences of selected
options that do not follow XHTML style rule for
markup.
To test:
1. Apply the patch
2. There are no functional changes at all,
only a more strict markup
Changed all cases I can found.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log