Owen Leonard [Fri, 12 Apr 2024 12:31:15 +0000 (12:31 +0000)]
Bug 36597: Fix deletion of circulation desks broken by CSRF
Our CSRF work introduced a problem with deleting circulation desks: The
"delete_confirm" does not need "cud-" because it's a GET operation
leading to a POSTed deletion after the confirmation is submitted.
To test, apply the patch and restart services.
- Go to Administration -> Circulation desks.
- If necessary, create a circulation desk.
- Click the "Delete" button for you new desk.
- You should be taken to a confirmation page which shows details of the
desk you're deleting.
- Confirming the deletion should result in deletion of the desk.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 33832: Allow updating username without changing password on member-password.pl
This patch updates the change password page on the staff interface to
allow for changing the patron's username without changing the password.
If the new password is an empty string we can skip setting the patron's
password and sending the new password to the template.
Test plan:
1. From a patron record tool bar click 'Change password'
2. Notice that if you try to change the user's name without also
changing the password the page just reloads and nothing happens
3. Apply patch and restart_all
4. From the patron record click 'Change password' again
5. Set the user's new username and password eg. '1234Abc' and click
'Save'
6. Confirm that you can log in to the OPAC with the user
7. Return to the patron record and click 'Change password' again
8. This time change just the 'New username field' and click 'Save'
6. Notice that the username is updated
7. Confirm you can log into the OPAC with the new username and the
original password '1234Abcd'
8. Make sure that the change password form still validates passwords
for length and matching errors etc
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Mon, 15 Jan 2024 10:19:51 +0000 (11:19 +0100)]
Bug 35810: Add back to top button on staff pages
Test plan:
1) Apply this patch and rebuild css with 'yarn build'
2) For example, perform a search from catalogue
3) Scroll down to see the button appear and scroll up to see it
disappear
Note that it's works also on patron search etc..
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 29 Nov 2023 16:37:04 +0000 (16:37 +0000)]
Bug 35432: Expand comments to explain the priority of filling requests
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 29 Nov 2023 15:00:18 +0000 (15:00 +0000)]
Bug 35432: Remove PULL_BRANCHES and use ifs over unless
PULL_BRANCHES and PULL_BRANCHES2 felt a little arbitrary, moved
to using a last in the outer loop.
Swapped 'next unless' for an if to more directly show when we are acting
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The code here is going to check items held the the pickup location for a request
or from the least cost branch matching the patron's home library against the HoldsQueuePrioritizeBranch
setting
The loop is the same in both case, so lets simplify this a bit to make the intent more clear
To test:
1 - prove -v t/db_dependent/HoldsQueue.t
2 - It should pass before and after this patch
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 29 Nov 2023 14:15:09 +0000 (14:15 +0000)]
Bug 35432: Add _can_item_fill_request subroutine
There are a series of repeated checks throughout MapItemsToHoldRequests.
This patch simply consolidates them into a single routine that can be called.
To test:
1 - prove t/db_dependent/HoldsQueue.t
2 - Confirm it passes before and after this patch is applied
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 29 Nov 2023 14:02:08 +0000 (14:02 +0000)]
Bug 35432: Add comments and POD
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 19 Mar 2024 15:00:04 +0000 (16:00 +0100)]
Bug 20388: Alert if the search field already exists
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: David Schmidt <davewood@gmx.at> Signed-off-by: Thomas Klausner <domm@plix.at> Signed-off-by: David Schmidt <davewood@gmx.at> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 19 Mar 2024 14:33:12 +0000 (15:33 +0100)]
Bug 20388: Add trash icon to the delete button
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: David Schmidt <davewood@gmx.at> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 19 Mar 2024 14:28:30 +0000 (15:28 +0100)]
Bug 20388: Adjust code
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: David Schmidt <davewood@gmx.at> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Arnaud [Wed, 7 Apr 2021 13:20:53 +0000 (13:20 +0000)]
Bug 20388: Elasticsearch - Ability to add search fields from UI
Test plan:
- apply this patch,
- check that SearchEngine system preference is set to Elasticsearch,
- go to Admin > Search engine configuration,
- on the search fields tab, fill a new line at the bottom of the table
(name, label, type)
- click on the "Add" button and save,
- check that the new search field has been saved,
- also test field deletions,
- check that you can't delete already mapped fields.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: David Schmidt <davewood@gmx.at> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36593: Add missing koha_object(s)_class methods to LibraryHour.pm (bug 9796)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36593: Add 'time' column type support to TestBuilder
This simple patch adds support for the 'time' column type.
To test:
1. Run:
$ ktd --shell
k$ perl -Mt::lib::TestBuilder -e 'my $b = t::lib::TestBuilder->new; my
$hour = $b->build_object({ class => "Koha::Library::Hours" });'
=> FAIL: It explodes as it doesn't know how to deal with the 'time'
column type
2. Apply this patch and the follow-up
3. Run:
k$ prove -MDDP -Mt::lib::TestBuilder -e 'my $b =
t::lib::TestBuilder->new; my $h = $b->build_object({ class => "Koha::Library::Hours" }); p($h->unblessed);'
=> SUCCESS: It generates an hour!
4. Run:
k$ prove t/db_dependent/TestBuilder.t
=> SUCCESS: It builds all the things!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 28268, in
Koha::MetadataRecord::Authority::get_all_authorities_iterator,
introduced a warning:
warn "Something went wrong reading record for authority $row->authid: $@\n";
But a method cannot be called from within quotes in Perl - extrapolation
does not work for functions/methods. So, if something really goes
wrong, this line of code produces a warning like:
Something went wrong reading record for authority
Koha::Schema::Result::AuthHeader=HASH(0x55cf7e0d0958)->authid: Empty
String at /usr/share/perl5/MARC/File/XML.pm line 450.
which is not very informative -- authid is missing.
Test plan
=========
Hard to reproduce. This problem occurs only in rare cases of some weird problem
in stores authority data or if a auth record had been deleted after a ES reindex
action has been initiated. But the problem in the code and the fix seem obvious.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Wed, 26 Apr 2023 23:04:48 +0000 (01:04 +0200)]
Bug 36552: Update record 'date entered on file' when duplicating a record
The 'date entered on file' (MARC21: 008/0-5, UNIMARC: 100a/0=7) of a record created
by duplication of an existing record should be set to the current date instead of
having the value of the original record.
Test plan
=========
1. Check the 'date entered on file' of an existing biblio / authotiry record
(MARC21: 008/0-5, UNIMARC: 100a/0=7).
2. Duplicate the record by Edit > Edit as new (duplicate)
3. Control the 'date entered on file' value - it will equal to that of the
original record.
4. Apply the patch (restart plack).
5. Repeat step 2.
6. Check the date - it should be the current date.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 25 Aug 2023 17:37:46 +0000 (17:37 +0000)]
Bug 34621: implement Patron import option to 'Renew existing patrons' 'from the current membership expiry date'
Test Plan:
1) Test importing a patron with the "from the current membership expiry date" option,
note it does not work
2) Apply this patch
3) Restart all the things!
4) Re-test, note the expiration was renewed from the patron's current
expiration date!
Signed-off-by: David Nind <david@davidnind.com> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 1 Apr 2024 14:32:08 +0000 (14:32 +0000)]
Bug 36473: Handle Invalid Metadata Exceptions in totalissues.pl
This patch wraps the call for record in an eval, and catches any invalid metadata
exceptions, letting the warning show, but allowing the script to continue
To test:
1 - In default KTD record 369 has problems, otherwise you need to break a record
2 - Run : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
3 - It dies at record 369 (or the one you broke)
4 - Apply patch
5 - Run again
6 - It succeeds, but skips the bad record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This case brought my attention as there was a different 'user' parameter being passed.
It turns out we already thought about this, and `objects.to_api` is of course always passing it :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36483: Make API controllers use $c->objects->to_api
This patch makes all controller methods using direct $object->to_api, rely on $c->objects->to_api.
Direct ->to_api calling prevents things like embeds, +strings, etc to be dealt with correctly.
In some cases this change reduces the code as the authors extracted the embed structure from the stash and passed it explicitly.
I left out two Patrons.pm cases because I need to study it a bit more.
To test:
1. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Wed, 12 Jun 2019 11:43:48 +0000 (11:43 +0000)]
Bug 23102: 404 errors on page causes SCI user to be logged out
To test:
1 - Have something on the SCO page that won't load
Add to SCOUserJS:
</script>
<img src="http://localhost:8080/silk/famfamfam.png"/>
<script>
2 - Enable the SCO and SCI system preferences:
WebBasedSelfCheck: Enable
SelfCheckInModuke: Enable
AutoSelfCheckAllowed: Allow
AutoSelfCheckID / AutoSelfCheckPass to a valid user with permissions
3 - Add the self_checkin_module and self_checkout_module permissions to the AutoSelfCheck user
4 - Access the selfcheckout module https://yoursite.org/cgi-bin/koha/sco/sco-main.pl
5 - Sign in using a patron
6 - Enter an unkown barcode, I used "DONTMATTER"
7 - If not logged out, click to 'Return to account summary'
8 - You are asked to sign in again
9 - Repeat with the SCI module
10 - Apply patch
11 - Repeat, but this time you can return to account
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 2 Apr 2024 17:03:21 +0000 (17:03 +0000)]
Bug 36494: Flatpickr error on checkout page if the patron is blocked from checking out
This patch add some error-handling to the recent change to
circulation.tt where we handle dates and on-site checkouts. This
prevents an error in the console when the patron is blocked and the
"specify due date" field is hidden.
To test, apply the patch and make sure OnSiteCheckouts is enabled.
- Go to Circulation and check out to a patron.
- Under the restrictions tab, add a manual restriction.
- When the page reloads and the checkout form is no longer visible,
confirm that there is no error in the browser console.
Confirm that the Bug 18885 test plan still works.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Thu, 8 Feb 2024 17:44:28 +0000 (12:44 -0500)]
Bug 36051: Add option to specify SMS::Send driver parameters in a system preference
If an SMS::Send driver ( such as Twilio ) requires additional parameters, those
parameters have to be placed in a yaml file named after the SMS::Send driver,
and the path to that file specified in the Koha conf file.
It would be good if we had the option to specify those parameters in a YAML
system preference instead. This would be less complicated and avoid requiring
an administrator to update that data from the backend.
Test Plan:
1) Set up an SMS::Send driver that requires additional options;
a Twilio account meets these requirements and can be created for
free. Set this up using the traditional file based system.
2) Verify you can send SMS messages
3) Move the contents of that file into the new system preference
SMSSendAdditionalOptions
4) Verify you can still send SMS messages
5) Delete the file
6) Verify yet again you can still send SMS messages!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Mon, 12 Feb 2024 15:48:06 +0000 (15:48 +0000)]
Bug 6796: day_of_week representation fix
The code here was flawed, DateTime returns a 1-7 indexed array with the
first day being Monday, Koha expects an 0-6 indexed array with the first
day being Sunday.
Sponsored-by: PTFS Europe Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 9 Feb 2024 16:59:45 +0000 (16:59 +0000)]
Bug 6796: Take CalenderFirstDayOfWeek and TimeFormat into account
This patch adds accounting for the `CalendarFirstDayOfWeek` and
`TimeFormat` preferences in the libraries management pages.
We respect CalendarFirstDayOfWeek for both input and display, but we
only respect TimeFormat for input at this time. We need a new template
helper and js helper for formatting just time in the appropriate format,
currently we only have such formatters for full datetimes.
Sponsored-by: PTFS Europe Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Tue, 10 Oct 2023 04:06:48 +0000 (04:06 +0000)]
Bug 6796: (follow-up) Displaying library hours
This patch shows the set library hours on a library's view page.
Still to be done:
- show on the Libraries summary page
- write tests
- consider time format settings
- fix translateability of day names in Libraries summary page
Sponsored-by: Catalyst IT Sponsored-by: Auckland University of Technology Sponsored-by: PTFS Europe Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 1 May 2023 22:10:44 +0000 (22:10 +0000)]
Bug 6796: (follow-up) QA test tool fixes
Sponsored-by: Catalyst IT Sponsored-by: Auckland University of Technology Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Fri, 5 Aug 2022 03:00:52 +0000 (15:00 +1200)]
Bug 6796: Don't add a day if hourly loan period pushes due date
If ConsiderLibraryHoursWhenIssuing is set to shorten the loan period to
the closing time, if the loan period initially pushes the due date to
the following day, the day still gets added when calculating the due
date. We simply need to hardcode the due time here as the due day is the
same as the issue day.
We only need to calculate a due date if ConsiderLibraryHoursWhenIssuing
is set to extend the loan period to the next opening day, as we'll need
to consider holidays/closed days.
Sponsored-by: Catalyst IT Sponsored-by: Auckland University of Technology Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Mon, 1 May 2023 02:56:42 +0000 (02:56 +0000)]
Bug 6796: Fix saving of libraries and tests
Sponsored-by: Catalyst IT Sponsored-by: Auckland University of Technology Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 6796: (follow-up) Fix logic for calculating following day's open hours
Since days for branch hours are stored as 0-6 in the database, when it's
a Saturday (6) incrementing the date leads to an error when issuing an
hourly loan because no opening hours are found for the non-existent day
(7).
This patch fixes this by calculating the tomorrow day and setting it to
0 if it's greater than 6.
This patch also corrects the mappings for days, where local_day_of_week
caluclates the date with Sunday first, which put it out of sync with the
database opening hours days.
Sponsored-by: Catalyst IT Sponsored-by: Auckland University of Technology Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 6796: Consider library hours when calculating due date + tests
This feature adds the ability to set opening and closing hours for your
library and for these hours to be considered when calculating due dates
for hourly loans. If the due date for an hourly loan falls after the
library closes, the library can choose for the due date to be shortened
to meet the close time, or extended to meet the open time the next day.
This feature adds a new table 'branch_hours' for storing the open and
close times per day for each library, and a new system preference
'ConsiderLibraryHoursInCirculation' to choose which behaviour should be
followed when calculating due dates.
To test:
1. Apply patches and update database. Upgrade schema if not applying
patch with schema changes. Restart services.
2. Go to Administration -> Libraries. Edit a library and scroll to the
bottom to find the 'opening hours' section. Test adding and removing
open and close times on various days. Confirm saving works as expected.
3. Add a new library and test adding open and close times works as
expected.
4. Edit your default library and save open and close times for each day.
5. Go to Administration -> Circulation and fine rules. Edit a rule, set
the unit to 'hours' and set the loan period to a number that would cause
a checkout to be due after the close time you just set, i.e. if you set
your close time to be 5pm and your system time is currently 1pm, set the
loan period to be 5 (5 hours) so the calculated due date would be 6pm.
6. Go to Administration -> system preferences. Search for
ConsiderLibraryHoursInCirculation. It should be under 'Checkout policy' in
the Circulation system preferences. Confirm the pre-selected option is
'ignore'. Keep this tab open.
6. In a new tab, get the barcode for an item that has an itemtype
matching the circulation rule you just set.
7. Go to the checkouts for a patron that has a categorycode matching the
circulation rule you just set.
8. Check out your item. Confirm that the checkout is due at the end of
the loan period, not taking closing hours into consideration. Return the
item.
9. Back in your other tab, set ConsiderLibraryHoursInCirculation to
'close', so the due date should be shortened to meet the close time.
10. Check out your item. Confirm the checkout is due when the library
closes. Return the item.
11. Back in your other tab, set ConsiderLibraryHoursInCirculation to
'open', so the due date should be extended to meet the opening time.
12. Check out your item. Confirm the checkout is due the next day when
the library opens.
13. Confirm tests pass t/db_dependent/Circulation/CalcDateDue.t
Sponsored-by: Catalyst IT Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 6796: ConsiderLibraryHoursInCirculation system preference
Sponsored-by: Catalyst IT Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 6796: Add library_hours table and set opening hours for library
Sponsored-by: Catalyst IT Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Magnus Enger [Fri, 5 Apr 2024 13:41:08 +0000 (13:41 +0000)]
Bug 36517: Fix output from install_plugins.pl
When misc/devel/install_plugins.pl does not find any plugins, it prints
the list of pluginsdir, but with a literal \n separating the dirs, and
no newline at the end.
To test:
- Edit koha-conf.xml and add a second entry for <pluginsdir>, so there
are two entries. The second one could just be a copy of the original.
- Run "perl misc/devel/install_plugins.pl"
- Note the output looks something like this:
No plugins found
pluginsdir contains:
/var/lib/koha/kohadev/plugins\n/var/lib/koha/kohadev/pluginsroot@kohadevbox:koha(master)$
- Apply the patch and run the script again. Output should be:
No plugins found
pluginsdir contains:
/var/lib/koha/kohadev/plugins
/var/lib/koha/kohadev/plugins
root@kohadevbox:koha(master)$
- Sign off
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch makes the test independent from existing cash registers in
the system.
To test:
1. Enable UseCashRegisters on a fresh KTD
2. Add a cash register
3. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/cashups.t
=> FAIL: Tests fail!
4. Apply this patch
5. Repeat 3
=> SUCCESS: Tests pass!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 36581: Define ymd in scope for checkouts table
Test plan:
1. Find or create an item with a public or nonpublic note
(in KTD default data, items on biblionumber 12 have notes already)
2. Check the item out to a patron
--> Checkouts table loading never completes
--> Browser console shows: "Uncaught ReferenceError: ymd is not defined"
3. Apply patch and clear browser cache
4. Refresh the page
--> Checkout table loads and console error is gone
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Thu, 11 Apr 2024 08:38:04 +0000 (08:38 +0000)]
Bug 36572: Fix and clean-up set library
To test:
1. Have 3 staff accounts to test:
-STAFF A: superlibrarian
-STAFF B: loggedinlibrary permission
-STAFF C: no loggedinlibrary or superlibrarian permission
2. Enable 'UseCirculationDesks' and create some desks. (Admin >
Circulation desks)
3. Enable 'UseCashRegisters' and create some registers ( Admin > Cash
registers)
4. Use STAFF A ( superlibrarian ) and make sure you can change branch,
desk and register.
5. Use STAFF B ( loggedinlibrary permission ) and make sure you can
change branch, desk and register.
6. Use STAFF C ( no loggedinlibrary or superlibrarian permission ) and
make sure you can change branch, desk and register.
7. Each time you change you should be redirected to the page you were
previously on.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Fix missed case of changing parameter name from "reports" to "id"
To test:
1. Find or create an SQL report that will return more than 20 rows
2. Run the report
3. Change the "Rows per page" drop-down to a new value
--> An empty page is displayed!
4. Apply patch
5. Repeat steps 2-3
--> The report is displayed with the appropriate number of results
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35980: Check for CAN_user_borrowers_edit_borrowers in patron-toolbar.inc
This patch removes the 'New patron' and 'Quick add new patron' buttons from the patron tool bar that's included on members-home.pl
To test:
1. Log in with a user with only 'catalogue', 'list_borrowers' and 'manage_patron_lists' permissions
2. From the main page click on Patrons
3. Notice there are 'New patron' and 'Quick add new patron' buttons in the members-home.pl page that lead to permissions errors
4. Apply patch, restart all, reload the page
5. Notice the buttons to add new patrons are gone, but the button to manage patron lists is still there
Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35980: Check for CAN_user_borrowers_edit_borrowers in more-member.tt
This patch removes edit buttons and add buttons from the more member page if the user does not have CAN_user_borrowers_edit_borrowers
To test:
1. Log in with a user with only 'catalogue' and 'list_borrowers' permissions
2. Search for a patron
3. Notice there are edit and add (pecil and plus icon) buttons in the patron details page
4. You may have to enable some system prefereences like HouseboundModule to fully test
5. Test that things like Additional attributes and identifiers are still displayed
3. Apply patch, restart all, reload the page
4. Notice the edit and add buttons in the patron details page are gone
Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35980: Check for CAN_user_borrowers_edit_borrowers in members-toolbar.inc
This patch removes the message button and more links from the members toolbar if the user does not have CAN_user_borrowers_edit_borrowers
To test:
1. Log in with a user with only 'catalogue' and 'list_borrowers' permissions
2. Search for a patron
3. Notice the 'Add message' and 'More' buttons in the toolbar only link to permissions errors
3. Apply patch, restart all, reload the page
4. Notice the buttons in the toolbar are gone
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 11 Apr 2024 05:52:53 +0000 (07:52 +0200)]
Bug 30897: Limit to plack environments
I had a feeling we'd want to do this when I submitted the proof of
concept, though I hadn't appreciated the wider issues that have now been
highlighted.. it makes a lot of sense to limit to the plack scope.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 10 Apr 2024 08:54:48 +0000 (10:54 +0200)]
Bug 30897: Gracefully restart plack after plugin install/remove
This patch adds a graceful plack restart to the plugin
install/uninstall routine to fully allow plugin install to work via the
staff client.
Test plan
1. list your worker processes with something like htop
2. install a plugin
https://github.com/bywatersolutions/dev-koha-plugin-kitchen-sink/releases
3. note that the PIDs of the workers stay the same and no sign of
restart (no PID changes and no CPU activity that the workers would
have if they were starting)
4. apply patches and restart services
5. unistall plugin
6. notice worker restart
7. install plugin
8. notice worker restart
9. downgrade plugin
10. notice worker restart
11. upgrade plugin
12. notice worker restart
13. disable and enable plugin
14. *no restart*
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 9 Apr 2024 15:55:57 +0000 (15:55 +0000)]
Bug 36511: Some scripts missing a dependency following Bug 24879
These files needed the addition of 'use C4::Auth qw( check_cookie_auth
);'.
To test, apply the patch and restart services.
- If necessary, enable the LocalCoverImages system preference.
- Open the browser console and then the "Network" tab. You can click
"Images" to filter for the correct kind of request.
- Perform a catalog search. After the search has loaded, check that
there are no 500 errors in the Network tab.
- Go to Cataloging -> Label creator.
- If necessary, create a label batch and add some items.
- Export your batch and test both the "Download as CSV" and "Download as
XML" links. Both should trigger the correct download.
- Go to Serials -> Claims, and select a vendor with late issues.
- Select all late issues and click "Download selected claims" at the
bottom of the page.
- Your CSV file should download correctly.
The file acqui/check_uniqueness.pl has been corrected as well but I'm
not sure how to test it!
Signed-off-by: danyonsewell <danyonsewell@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 5 Apr 2024 01:59:34 +0000 (18:59 -0700)]
Bug 36531: Serve text/javascript compressed, like application/javascript is
Koha serves static .js files as application/javascript (if /etc/mime.types
says to) and serves them compressed, but output_with_http_headers uses the
currently-correct text/javascript mimetype, and Koha doesn't compress that.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to Enable.
2. Open the browser Web Developer Tools to the Network tab
3. Load Cataloging - Advanced editor
4. Click on the line for the framework?frameworkcode=&callback=define load
5. Note the content-type text/javascript, no Content-Encoding line, and
the size of 1.9MB
6. Apply the patches from bug 36463 if they haven't been pushed, then this
patch, and reset_all
7. Repeat steps 1-4, and note a Content-Encoding: gzip header and a
Transferred size around 160KB
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 29 Mar 2024 12:54:30 +0000 (12:54 +0000)]
Bug 36463: Compress application/json
This patch simply adds application/json to the mod_deflate configuration
To test:
1 - Open the netowrk tab in firefox
2 - Load http://localhost:8081/api/v1/libraries
3 - Not the transferred size, and note no 'Content-Encoding: gzip" header
4 - Apply patch, reset_all (or edit /etc/koha/apache-shared.conf)
5 - Reload
6 - Note smaller size, note gzip header
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 4 Apr 2024 23:28:53 +0000 (16:28 -0700)]
Bug 36379: Fix auth_finder.pl to not expect the op cud-do_search
The authority finder just does a GET for a list of search results, it
doesn't create or update or delete, so the template that thinks the op
is do_search is correct.
Test plan:
1. Cataloging - New record
2. In the 1 tab click the Tag editor icon at the end of 100 subfield a
3. In the popup, click Search, and nothing happens, no results are shown.
4. Apply patch, reset_all
5. Repeat steps 1-3, see that you get results.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Fri, 27 Oct 2023 21:06:44 +0000 (21:06 +0000)]
Bug 32707: Unit tests
NB in t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t,
I had to modify four existing test by changing Local-number:123456 to
Personal-name:donald -- since Local-number should never be
auto truncated according to the submitted patch.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Tue, 24 Jan 2023 09:45:39 +0000 (10:45 +0100)]
Bug 32707: ElasticSearch should not auto truncate (even if QueryAutoTruncate = 1) for identifiers (and some other fields)
Koha with Zebra prevented auto truncation in some circumstances -- see
the first return for ccl inside C4::Search:: buildQuery, before applying
auto truncation, and setting $auto_truncation = 0 for some search
fields.
Koha with ElasticSearch applies auto truncation for all search fields,
not paying attention to these special cases when it should not be done.
This leads to various problems as described in bug 26508, 26608, etc.
The solution would be to prevent auto truncation for certain search
fields, above all – the identifiers. In addition, under no
circumstances should a search field other than of text type be truncated
(an attempt to truncate would generate an exception from ElasticSearch,
e.g. number_format_exception for integer).
Test plan
=========
0. Use the test data sample provided in the bug report. Comment 16 in
the ticket.
Scenario A (authority)
----------------------
1. Enable Elasticsearch engine.
2. Have like 100+ bibliographic records and properly linked authority
records.
3. Reindex ElasticSearch if needed.
4. Enable QueryAutoTruncate systempreference.
5. Find the authority record #1 and note the number of linked biblio
records.
6. Show the detail of authority #1 and compare the number of linked
biblio records.
7. If in the database there are authority records with ids =~ /^1/ (i.e.
10, 11, 12, ..., 100, 101, ...) linked to the biblio records you get
two different numbers of linked records.
8. Also, as lists of linked biblio records (via link: Used in N
record(s) from results view and detail view) you will get two
different sets of biblio records. In particular, on the list generated
from detail view (authorities/detail.pl?authid=1) you will get biblio
records that are in fact not linked to the auth #1 (the list is
generated with &q=an:1).
8.99. Skip to scenario B and come back here after finishing to not have
to unapply the patches and restart services for nothing.
9. Apply this patch.
10. Counts and list of linked biblios should be ok.
Scenario B (analytics)
----------------------
1. Enable Elasticsearch engine.
2. Have three monographic bibliographic records with 001 = 1, 10, 100
(i.e. =~ /^1/).
3. Have an analytical record with 773 $w = 1 (in the test data set - biblio 896).
4. Enable QueryAutoTruncate and UseControlNumber systempreference.
6. Find the analytical record and click on the link generated from 773,
i.e. (In: ... --> catalogue/search.pl?q=Control-number:1). You should see
a list of 100+ records (001 = 1, 10, 100) instead of one (001 = 1).
7. From the biblio # 1 try to go to the analytice records (with Show analytics
link) - you should get 60+ records with from different host records (773 $t)
-- instead of one.
8. Apply this patch. Make sure that control-number and record-control-number
are included in ESPreventAutoTruncate syspref.
9. Repeat steps 6 and 7. You should arrive at the right host record in p. 6
and at one analytical records when looking for analytical records in p. 7
(or more than one, but right, if you modified the test data set).
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Janusz Kaczmarek [Wed, 25 Oct 2023 09:05:24 +0000 (09:05 +0000)]
Bug 32707: Add 'ESPreventAutoTruncate' preference
This patch adds a new 'ESPreventAutoTruncate' preference allowing to define
Elasticsearch search fields that should not be autotruncated when 'QueryAutoTruncate'
is active (e.g. barcode).
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 4 Jan 2024 11:52:43 +0000 (11:52 +0000)]
Bug 35392: Update tests
Run:
yarn cypress run --spec "t/cypress/integration/ERM/DataProviders_spec.ts"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Thu, 4 Jan 2024 11:52:31 +0000 (11:52 +0000)]
Bug 35392: Fix HTML in translatable string
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Wed, 13 Mar 2024 17:32:17 +0000 (13:32 -0400)]
Bug 36307: SMS::Send driver errors are not captured and stored
If an SMS::Send driver succeeds, it returns a value that evaluates to true. Every driver I've inspected uses croak when it encounters a failure state.
When an SMS message fails to send, code hard codes the failure code to NO_NOTES (No notes from SMS driver).
We should store the real error in `failure_code` and display that if the failure code doesn't match a known failure code.
Test Plan:
1) Apply this patch
2) Set SMSSendDriver to any value
3) Generate a pending sms message
4) Run the following query:
update message_queue set status = 'failed', failure_code = "This is a test";
5) View the patron's messages, note the delivery note contains the
contents of the failure code
6) Run the following query:
update message_queue set status = 'failed', failure_code = "SMS_SEND_DRIVER_MISSING";
7) Reload the patron's messages, not the delivery note is now "The SMS
driver could not be loaded".
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Thu, 29 Feb 2024 22:33:33 +0000 (22:33 +0000)]
Bug 36082: Set branchcode correctly in opac-facets.inc
1. Tools> HTML Customization
2. Choose OPACresultssidebar
3. Create an entry specific to a library.
4. Also try to add this same entry into a translation tab, if installed.
5. Go to the OPAC
6. Login as a patron of that library that the specific OPACresultsidebar is assigned to
7. Search the catalog, and look below the facets,where the OPACresultssidebar would appear.
8. No text.
9. APPLY PATCH
10. Try step 7 again.
11. TEXT!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Fri, 5 Apr 2024 14:34:02 +0000 (16:34 +0200)]
Bug 33568: Prevent api/v1/biblios.t to fail randomly
koha_1 | # Failed test 'The items are returned'
koha_1 | # at t/db_dependent/api/v1/biblios.t line 196.
koha_1 | # Structures begin differing at:
koha_1 | # $got->[0]{external_id} = 'th151O2JtgfGdVW6aiF'
koha_1 | # $expected->[0]{external_id} = 'uxrMzUXrkHQy7MHOSfjK'
koha_1 | # Looks like you failed 1 test of 11.
koha_1 |
koha_1 | # Failed test 'get_items() tests'
koha_1 | # at t/db_dependent/api/v1/biblios.t line 206.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 1 Feb 2024 14:39:49 +0000 (15:39 +0100)]
Bug 33568: Fix columns shift when pref are off
From comment 66:
If StaffDetailItemSelection and/or LocalCoverImages is turned off, the alignment of the drop-down filters for the other columns is offset by 1 for each of the two sysprefs that is disabled
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 1 Feb 2024 08:48:31 +0000 (09:48 +0100)]
Bug 33568: (follow-up) Fix ordering - WIP
This is not working. We are still getting the error
Unable to programatically derive a required group_by from the supplied order_by criteria. To proceed either add an explicit group_by, or simplify your order_by to only include plain columns (supplied order_by: 'lpad_copynumber').
To recreate the problem you can go to detail.pl and search for something
Without search the query is working.
The problem appears when the query has WHERE parameters added and "GROUP
BY" is added.
DBIC is adding to the GROUP BY what is added to the select, but does not
handle this situation (not a plain column).
You can play with:
1.
Remove from Koha::Items->search_ordered
475 'lpad_copynumber',
=> all good
2. Remove the following block from /usr/share/perl5/DBIx/Class/Storage/DBIHacks.pm
584 # only consider real columns (for functions the user got to do an explicit group_by)
585 my $chunk_ci;
586 if (
587 @{$order_by[$o_idx]} != 1
588 or
589 # only declare an unknown *plain* identifier as "leftover" if we are called with
590 # aliastypes to examine. If there are none - we are still in _resolve_attrs, and
591 # can just assume the user knows what they want
592 ( ! ( $chunk_ci = $colinfos->{$order_by[$o_idx][0]} ) and $attrs->{_aliastypes} )
593 ) {
594 push @$leftovers, $order_by[$o_idx][0];
595 }
=> all good
I don't know if we are doing something wrong here, but I have no idea
how we can build the group_by explicitely.
Is there another way to do this?
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log