Janusz Kaczmarek [Mon, 17 Feb 2020 11:58:46 +0000 (12:58 +0100)]
Bug 24674: Uncertain years for publicationyear/copyrightdate -- corrected
This is a correction to Bug 11046: YYY-, YY--, Y---, are also
correct according to ISBD: uncertain year, but certain decade/century
(cf. n. 4.3.8 in ISBD Consolidated Edition of 2011).
(Question mark is not mandatory.)
In addition, in Poland a form with one only dash is quite common,
like YY- (== YY--).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
See last follow-up.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's loading the modules in RAM then forks.
Then do not need it to have them loaded in the parent process (the worker/daemon).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Andreas Roussos [Mon, 27 Sep 2021 12:47:00 +0000 (14:47 +0200)]
Bug 29123: Add Dataly Tech to About page
This patch adds Dataly Tech to the list of "Contributing companies
and institutions" in the About page.
Test plan:
1) View the About page, notice how Dataly Tech is missing
2) Apply this patch
3) Reload the About page, this time "Dataly Tech, Greece" is listed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Petro Vashchuk [Wed, 3 Mar 2021 12:34:52 +0000 (14:34 +0200)]
Bug 27708: Unify two item object creation blocks to be stored as hash
Previously for existing item data was stored as an object reference and
then treated as one, but for not yet existing item data was stored as
keys in hash reference in the same variable and later it was treated
like an object, hence why it crashed with "no method".
This patch unifies that variable in both cases filled as hash and
treated as such.
To reproduce:
1) Go to "Administration->System preferences" and change
"AcqCreateItem" to "receiving an order."
2) Now, go to "Acquisitions" and create a new Vendor,
or use an existing one.
3) Next, go to "Administration->EDI Account" and add EDI account
(pick that Vendor that you created recently, or the one that you will
use for this test).
4) Also in "Administration->Library EANs" add EAN if you didn't
have one previously.
5) Go back to "Acquisitions" and add a new basket to your Vendor
that you will use for this test.
6) Press "Create EDIFACT order" button. It should throw
"Can't call method "homebranch" on unblessed reference..."
software error.
7) Apply the patch.
8) Reload the page that threw software error previously
(or repeat steps 5, 6 if you need another basket),
it should go through now.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Thu, 4 Nov 2021 06:50:46 +0000 (06:50 +0000)]
Bug 29411: Redirect to circulation if circsearch is true
TO test:
1 - Have a patron with a unique surname i.e. Acosta
2 - Enter the surename into 'Search patrons' box on staff homepage
3 - You are redirected to 'members/moremember.pl'
4 - Enter the surname into 'Check out' box at top of page
5 - You are redirected to 'members/moremember.pl'
6 - Apply patch
7 - Enter the surename into 'Search patrons' box on staff homepage
8 - You are redirected to 'members/moremember.pl'
9 - Enter the surname into 'Check out' box at top of page
10 - You are redirected to 'circ/circulation.pl'
Signed-off-by: Owen <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Tue, 27 Jul 2021 18:08:12 +0000 (18:08 +0000)]
Bug 28768: remove unnessesary template variable
To test:
1. Add some news that should display on opac-readingrecord.pl. For example: opacheader, OpacCustomSearch, opaccredits
2. Go to opac-readingrecord.pl, the news doesn't display
3. Apply patch, restart_all
4. Go to opac-readingrecord.pl, the news displays
5. Turn on 'opacreadinghistory' and test to make sure it still works
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 4 Nov 2021 13:39:28 +0000 (14:39 +0100)]
Bug 29180: Rename syspref RequestOnOpac with OPACHoldRequests
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Mon, 25 Oct 2021 18:55:53 +0000 (18:55 +0000)]
Bug 29265: Add option to pick editor when creating a new content entry
This patch changes the "New entry" button on the additional contents
page to be a split button which offers the alternative of the
non-default editor (as defined by AdditionalContentsEditor).
Also changed: I moved some of the template logic around to consolidate
handling of the editor variables.
To test, apply the patch and go to Tools -> HTML customizations.
- At the top of the page there should be a split button. The dropdown
option should offer the non-default editor.
- If AdditionalContentsEditor is set to "text editor," clicking the
"main" part of the button should take you to an entry page which uses
the text editor.
- The dropdown part of the button should say "New entry using
WYSIWYG editor."
- Switch the AdditionalContentsEditor preference and confirm that the
button reflects the change.
- Confirm that the individual "Edit" buttons for each existing content
entry still works correctly according to the system preference.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 28 Oct 2021 11:00:29 +0000 (11:00 +0000)]
Bug 29201: Add option to insert biblio_framework runtime parameter in SQL report
This patch modifies the SQL report creation process so that the list of
runtime parameters includes an option for bibliographic framework.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" menu button and select
"Bibliographic framework."
- You should be shown a modal dialog in which you can change the label
on the framework input.
- Click "Insert parameter." The SQL field should now contain the correct
parameter, e.g. <<Framework|biblio_framework>>
- Use the parameter to define an SQL query, e.g.
"SELECT * FROM biblio WHERE frameworkcode =
<<Framework|biblio_framework>> LIMIT 10"
- Run the report. You should be asked to choose a framework. Confirm
that the report runs correctly.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 29 Oct 2021 10:47:03 +0000 (10:47 +0000)]
Bug 29369: Use Flatpickr in dateaccessioned cataloging plugin
This patch udpates the dateaccessioned cataloging plugin to use the
Flatpickr date picker instead of jQueryUI.
To test, apply the patch and open an item for editing in Cataloging.
- The date acquired field (952$d) should have flatpickr styling.
- Clicking in the field should populate the field with today's date and
trigger the calendar popup.
- Clicking the "..." next to the field should populate the field (when
empty) with today's date.
- Verify that tabbing from a different field into the date acquired
field behaves the same as a click.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 9 Sep 2021 14:10:57 +0000 (14:10 +0000)]
Bug 28982: Use Flatpickr on onboarding pages
This patch replaces the use of jQueryUI's datepicker in the onboarding
templates. The addition of calendar.inc to the template requires that
some additions be made to the installer's header files, adding the i18n
JavaScript assets.
jQueryUI-specific CSS is removed from installer.scss, and inclusion of
Flatpickr's SCSS is added.
To test, apply the patch and rebuild the staff client SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Start the installation process.
- Continue through the installation process until you reach the stage in
onboarding where you are creating a patron category.
- The "Enrollment period -> Until" field should be a Flatpickr calendar
widget. The widget should look and work correctly.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 5 Aug 2021 18:02:29 +0000 (18:02 +0000)]
Bug 28816: Improve the display of multiple holds during hold process
This patch updates the appearance of the "confirm holds" page, shown
during the process of placing a hold for someone in the staff interface.
Most of the changes affect the appearance of the page when placing
multiple holds on titles which have one or more holds on them already.
The changes are intended to make the page clearer and easier to scan,
especially when placing multiple holds at once.
Also changed: The page heading when placing multiple holds now changes
based on whether you've selected a patron or not. It says "Search
patrons or clubs" when it's waiting for a patron/club selection. It says
"Place holds" after the patron/club has been selected. This is instead
of "Confirm holds" on both pages.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> System preferences and set HoldsSplitQueue to
"nothing."
- Perform a search in the staff client catalog and place multiple holds
titles from that result set on hold for a patron.
- Perform the same search and select one or more of the titles you
selected before in addition to one or more titles with no holds.
- After clicking the "Place hold" button you should see a page with the
heading "Search patrons or clubs" showing information about existing
holds. This section of the page should be clear and readable, with
clear distinction between each section of information about each hold.
- Test this page again under each different option for the
"HoldsSplitQueue" system preference by changing the preference and
reloading the page.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 8 Oct 2021 15:31:46 +0000 (15:31 +0000)]
Bug 28694: Check alert in cataloguing should be a static message
This patch modifies the basic cataloging interface so that form
validation errors are collected in a static "dialog" at the top of the
page instead of showing in a transient JavaScript alert.
The text of the message is roughly the same as it was in the alert, and
links have been added so that the user can click to jump directly to the
field referenced.
If the user scrolls down away from the static error message, a button
appears in the floating toolbar to jump back to the message.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Cataloging and create a new record using the basic cataloging
editor and a framework which has multiple mandatory fields defined
(e.g. an unmodified default framework)
- Without entering anything in mandatory fields, click the "Save"
button.
- You should see a message box appear at the top of the page.
- It should list each missing mandatory subfield and tag, each with a
"Go to field" link next to it.
- Clicking the "Go to field" link should switch you to the correct tab
and scroll the mandatory field into view.
- When you have scrolled down far enough for the error messages to be
offscreen, an "Errors" button should appear in the floating toolbar.
Clicking it should scroll the box back into view.
- The JS function for scrolling to a particular element on the screen
has been modified, so test that the links in the toolbar for
individual tags still work correctly.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 17 Sep 2021 15:15:55 +0000 (15:15 +0000)]
Bug 28537: (follow-up) Correct and improve OverDrive checkout modal
This patch corrects the markup of the modal which is displayed when the
user clicks the "Download as" button in their list of OverDrive
checkouts. The modal markup had not been updated in the conversion to
Bootstrap 4.
I have also modified the markup generated when listing the download
format options so that they use some standard Bootstrap 4 classes,
improving the layout a little.
To test you must have valid credentials entered in system preferences
for the OverDrive API. You should test using a patron who has holds and
current checkouts in OverDrive.
Apply the patch and log in to the OPAC.
- On the "Your summary" page, open the "OverDrive Account" tab.
- Log in to your OverDrive account.
- In the list of current checkouts, click the "Download as" button for
one of the titles.
- A modal window should display with a list of radio buttons for
each available format.
- Confirm that the format text acts as the label for the radio
button.
- Confirm that closing the modal without making a selection works
correctly.
- Confirm that making a selection and submitting the form closes
the modal and submits your choice.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 9 Jun 2021 15:43:50 +0000 (15:43 +0000)]
Bug 28537: Improve HTML generated by OverDrive integration
This patch makes changes to the way HTML is generated when showing
output from OverDrive integration:
- Buttons have Bootstrap button classes
- Layout of information is improved.
- Handling of cover image thumbnails is improved, especially in cases
where images were much larger than expected.
- An OverDrive-specific CSS file is added.
To test you must have valid credentials entered in system preferences
for the OverDrive API. You should test using a patron who has holds and
current checkouts in OverDrive.
Apply the patch and log in to the OPAC.
- On the "Your summary" page, open the "OverDrive Account" tab.
- Log in to your OverDrive account.
- The contents of the tab should display well, with item
thumbnails showing in a column to the left, and item information
showing to the right.
- Controls should be styled with standard Bootstrap style.
- Confirm that operations work correctly: Acessing titles, checking
in, canceling holds, etc.
- Perform a catalog search which will return results also found in your
OverDrive collection.
- Open the OverDrive results page.
- The page should display correctly, especially thumbnails.
- Confirm that operations work correctly: Checking out and placing
holds.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Tue, 12 Oct 2021 10:32:05 +0000 (10:32 +0000)]
Bug 28450: Make Account summary print tables configurable
This patch adds table settings for the three tables which appear on the
patron's "Print summary" view. This will allow the administrator to
set a default configuration for columns on the print summary page.
To test, apply the patch and restart-all to load the revised columns
settings YAML. Rebuild the staff interface SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Table settings -> Circulation.
- Under the "Circulation tables" heading you should see a "Jump to" link
to "print_summary."
- In the settings for the print_summary page you should see three
tables: print-summary-checkouts, print-summary-fines, and
print-summary-holds.
- Locate a patron account which has checkouts, fines, and holds.
- From the patron detail view click "Print -> Print summary."
- A new window should open with the print summary view. All tables
should display correctly.
- Test that the "Columns" buttons work correctly to show and hide
columns.
- Make changes to the default settings for these tables to confirm that
they work on the print summary page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 15 Oct 2021 12:26:16 +0000 (12:26 +0000)]
Bug 27823: List upcoming steps during installation process
This patch adds text to each step of the installation process showing
which steps have been completed, which step is current, and which steps
come next. This helps the user know where they are in the process.
To test, apply the patch and begin the process of installing Koha. In my
testing environment I drop the Koha database and create it again.
On each step of the installation process, confirm that the list of steps
is correct, showing the right stage in the process.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Mon, 9 Nov 2020 19:36:22 +0000 (19:36 +0000)]
Bug 27296: Return claims should be filtered by default to show unresolved claims
This patch modifies the DataTables configuration of the return claims
table on the checkout and patron detail pages. Using the footerCallback
function, the count of resolved and unresolved claims is calculated and
used to filter the list of claims to show only unresolved claims by
default.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- If necessary, Enable claims returned functionality by defining a value
in the ClaimReturnedLostValue system preference.
- Open for checkout a patron who has items checked out.
- From the table of checkouts, click "Claim returned" for one or more
items.
- As you mark items "Clamed returned," the the items should appear
under the "Claims" tab. The corresonding filter links should be
updated accordingly, "Show all X claims."
- Mark one or more claims resolved. As you do so they should disappear
from the list of claims. The filter links should be updated to
reflect that there are some resolved and some unresolved claims.
- Clicking each filter link should trigger the correct filter.
- Test this process when the count of unresolved claims is zero and
when the cound of resolved claims is zero.
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/checkouts.js for
translation, e.g.:
- Edit the "msgstr" strings however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client and
repeat the test plan above. The translated strings should appear.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 15 Sep 2021 17:17:28 +0000 (17:17 +0000)]
Bug 29015: (follow-up) Default to logged in branch unless viewing queue
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 15 Sep 2021 12:14:19 +0000 (12:14 +0000)]
Bug 29015: (follow-up) Show sidebar filter form with results
This patch adds the new filter form in the sidebar when showing results.
To do so the form markup is moved into a BLOCK so that it can be reused.
This patch also adds pre-selection of submitted options on the filter
form so that it reflects the user's choices.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation -> Holds queue.
- Submit the form with one or more filters selected.
- On the results page the queue should be correctly filtered and the
sidebar should show your search fields preselected.
- Test with the CircSidebar preference enabled and disabled. The
circulation menu should appear correctly, with the filter form only
displaying in the sidebar after submitting the form.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 14 Sep 2021 19:29:27 +0000 (19:29 +0000)]
Bug 29015: Add options for itemtype, collection, and shelving location to view_holdsqueue.pl
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 19 May 2021 12:54:16 +0000 (12:54 +0000)]
Bug 26326: DBIC Schema changes
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 27 Oct 2021 13:54:43 +0000 (14:54 +0100)]
Bug 27360: Use 'public' to filter libraries for opac display
This patch adds the ability to set a library as 'public' or not; this
allows librarians to hide back office library branches from the opac.
Test plan
1/ Set a library as public from `admin > libraries`.
2/ Navigate to the `Libraries` page in the OPAC
3/ Note that only `public` libraries are displayed.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 27 Oct 2021 13:49:01 +0000 (14:49 +0100)]
Bug 27360: DBIC Build
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 27 Oct 2021 13:48:16 +0000 (14:48 +0100)]
Bug 27360: Add public field to branches table
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 27 Apr 2021 13:10:27 +0000 (14:10 +0100)]
Bug 25883: Replace 'holdingbranch' with 'transfer to' in returns
This patch replaces the "Holding library" column in the returns table
with a 'Transfer to' column that displays the destination for the item
awaiting transfer if a transfer exists.
Signed-off-by: Ben Daeuber <bdaeuber@fargolibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Run t/db_dependent/Koha/Plugins/authority_hooks.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 8 Dec 2020 14:54:00 +0000 (15:54 +0100)]
Bug 27173: Add plugin hooks for authority record changes
2021-09-28 Updated version
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 27 May 2021 13:53:01 +0000 (09:53 -0400)]
Bug 28474: Pass process_message_queue.pl params to before_send_messages plugin hooks
It would be useful to send most of the process_message_queue.pl script parameters to any plugin before_send_messages hooks. For example, the Twilio Voice plugin uses before_send_messages to send phone messages, but if the script is called with "-t email", it doesn't know and will make phone calls! If that info were passed in, the plugin could be made aware of it and only make calls if no "-t" or a "-t phone" were set in the parameters.
Test Plan:
1) Apply this patch
2) Install Kitchen Sink plugin v2.2.0 or later
https://github.com/bywatersolutions/dev-koha-plugin-kitchen-sink/releases/download/v2.2.0/dev-koha-plugin-kitchen-sink-2.2.0.kpz
3) Run misc/cronjobs/process_message_queue.pl with any or all non-email
related paramters
4) Note the plugin output shows the parameters were passed to the plugin
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Sun, 22 Aug 2021 14:20:55 +0000 (14:20 +0000)]
Bug 24406: Wrap patron category type code in a span on patron search results
The patron category type code (A, C, O, ...) is currently displayed in the
patron module search and the patron card creator and acquisition patron searches.
This information is not useful for most users, as these are internal codes
that cannot be easily "decoded". And while you might be able to guess A as
Adult in English, it doesn't translate to other languages.
This patch wraps a span around the patron category type code shown
in () after the patron category.
To test:
- Verify for each of the following three searches, that the patron category code
displays in the search results, but is wrapped in a span with the class
patron_category_type
- Tools > Patron card creator
- New > New card batch > Add patrons
- Search for patrons
- Patrons
- Search for patrons
- Acquisitions
- Add a budget
- Add a fund for the budget
- Search for a user or owner to add
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 3 Nov 2021 12:43:11 +0000 (13:43 +0100)]
Bug 28417: Don't require C4::Auth_with_cas from opac-user if not needed
Note that without the use URI::QueryParam statement in C4::Auth we get:
Can't locate object method "query_param_delete" via package "URI::_generic" at /kohadevbox/koha/C4/Auth.pm line 1254
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- There are CAS demo servers, pick one [1]
- They all seem to have the same user/pass as of writing this:
User: casuser
Password: Mellon
To test:
1. Enable CAS and all related preferences. I chose v3 or higher, it only affects the logout action.
2. Set the CAS URL: https://casserver.herokuapp.com/cas (note that if you click on any of the examples, they include a trailing /login, don't put it).
3. Generate a Koha user, with userid: casuser (I also used that for cardnumber, just in case). Set no password to the user, or its irrelevant anyway. Add it stff permissions.
4. Open your Koha OPAC, I use KTD thus:
http://kohadev.myDNSname.org:8080
5. Try to login using CAS
=> SUCCESS: You are redirected to the right login page
6. Login using casuser/Mellon as advertised in the 'demos' site.
=> SUCCESS: You are logged in!
7. Now logout
=> SUCCESS: You are sent to CAS so they know you wanted to logout (if you enabled CAS logout)
8. Repeat on the staff interface.
=> SUCCESS: Things work!
9. Apply this patches, restart all the things:
$ restart_all
10. Repeat all in OPAC and admin interfaces
=> SUCCESS: Things work!
11. Sign off :-D
[1] https://apereo.github.io/cas/Demos.html
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 21 May 2021 12:26:29 +0000 (14:26 +0200)]
Bug 28417: Don't use C4::Auth_with_cas if CAS is not used
We should follow the same pattern as ldap and not use C4::Auth_with_cas
if the cas syspref is not turned on.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Johanna Raisa [Mon, 11 Jan 2021 07:49:45 +0000 (09:49 +0200)]
Bug 27375: Set YAML file settings in .editorconfig
To test:
1) Start an editor that supports .editorconfig.
2) Open YAML file mappings.yaml for example.
3) Format the file.
4) Observe that nothing changes.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Andrew Isherwood [Wed, 18 Aug 2021 14:07:54 +0000 (15:07 +0100)]
Bug 28879: Fix display of request metadata
This commit adjusts the CSS surrounding the display of request
metadata, it improves the display for metadata with long key names.
Test plan:
- Do not apply patch
- Create a FreeForm ILL request with a custom metadata field with a long
name
- View the created request
- Observe that the long metadata name breaks the display of the metadata
- Apply the patch
- View the created request
=> TEST: Observe that the display is no longer broken
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3. Verify that the framework code was correctly assigned:
sudo koha-mysql kohadev -e 'SELECT frameworkcode FROM biblio ORDER BY timestamp DESC LIMIT 1;'
=> SUCCESS: It picked it
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fridolin Somers [Mon, 17 May 2021 14:20:41 +0000 (16:20 +0200)]
Bug 28365: (Bug 19873 follow-up) Make it possible to search on value 0
Bug 19873 fixed search with value 0.
It works in first page but not in other pages.
This patch fixes query_cgi var.
Test plan:
- create a st-numeric index in zebra conf related to
a numeric field
i.e:
yourindex 1=yourindex 4=109
- fill a field with 0 in several biblio records,
- reindex your biblios,
- search yourindex=0 and go to second page of results,
- should not work,
- apply this patch,
- test again,
- should work
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fridolin Somers [Mon, 17 May 2021 14:15:19 +0000 (16:15 +0200)]
Bug 28365: Add unit test
Run prove t/db_dependent/Search.t
Without fix you get error :
# Failed test 'buildQuery should keep 0 value in query_cgi'
# at t/db_dependent/Search.t line 670.
# got: 'idx=su%2Cphr'
# expected: 'idx=su%2Cphr&q=0'
This patch also adds a test for query_desc in case it is broken in the
future.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Sat, 30 Oct 2021 19:02:39 +0000 (19:02 +0000)]
Bug 29380: Correct table name in joins to prevent errors
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the joins were not updated accordingly so a
few scripts got broken.
To test:
1) Notice that
$ perl misc/cronjobs/automatic_renewals.pl -c -s -v
returns 255 error code on exit
2) Apply patch
3) Notice the automatic_renewals.pl works now and exit code is 0
4) Make sure /cgi-bin/koha/tools/batch_extend_due_dates.pl works.
5) Try to grep for 'borrower' in Koha source code and see if there
are any other join done using the Koha::Checkout or
Koha::Old::Checkout objects.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29380: (follow-up) Fix renewal feature in staff interface
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the usage in the renew.pl script was not
updated.
To test:
1) Try to renew a book in intranet through the renewal tab
2) Notice it gives error
3) Apply patch
4) Notice the error is now gone
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Johanna Raisa [Thu, 2 Sep 2021 09:22:51 +0000 (12:22 +0300)]
Bug 28236: Allow access to json files from apache config
This patch grants json files from koha-tmpl. Otherwise systempreferences won't be able to fetch them.
TEST PLAN:
1) Try to set systempreference BorrowerUnwantedField.
2) The modal is empty.
3) Modify Apache configurations like in this patch.
4) Try again set the systempreference.
5) The modal should show list of parameters.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
JD Amended patch: replace tab characters and reword commit title
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 3 Nov 2021 09:06:35 +0000 (10:06 +0100)]
Bug 24850: Date only are not RFC3339
We removed the fallback on 'Bug 24850: Don't fallback when date_format
is passed', and the dates passed for date only (YYYY-MM-DD) are not
RFC3339 formatted but ISO8601.
We must assume that all dates will be YYYY-MM-DD, without fallback.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 2 Nov 2021 08:42:05 +0000 (09:42 +0100)]
Bug 29261: (bug 15812 follow-up 3) Fix translation issue in include file
This is getting messy. No idea how I tested the previous patches but it
was not working, the problem still persisted.
This patch is using the I18N TT plugin to make things easier and fix the
original problem.
Test plan:
Apply the patch
perl translate update fi-FI
Edit misc/translator/po/fi-FI-messages.po
Locate and translate "Check out"
61 #: koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt:20
62 msgid "Check out"
63 msgstr "Laina"
Locate and transate "View"
182 #: koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt:22
183 msgid "View"
184 msgstr "Nayta"
Apply the change to the fi-FI templates
perl translate install fi-FI
Now enable the fi-FI in the lang syspref, search for patron and confirm
that the result view is displayed correctly.
Note that the "Check out" and "View" strings are correctly translated
(when you hover the cardnumbers or patron's names)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 19 Oct 2021 15:57:10 +0000 (16:57 +0100)]
Bug 28729: Unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 19 Oct 2021 15:57:25 +0000 (16:57 +0100)]
Bug 28729: Make Koha::Email->send_or_die handle returnpath
Koha used to rely on Mail::Sendmail for sending emails. As an SMTP
client, the library would extract the from address from the Sender
header to pass along in the MAIL FROM: field of the SMTP protocol [1].
This was overlooked when we moved to Email::Stuffer/Email::Simple and
there's a different behavior as it expects the envelope to be passed and
falls back to extracting the 'From' header when said envelope is not
found [2].
This patchset re-introduces the behavior from Mail::Sendmail by
overriding the send_or_die method locally (in Koha::Email) and doing the
right thing.
Unless an explicit {from} parameter is passed, it extracts the MAIL FROM
envelope from the Sender header, as Mail::Sendmail did, and calls
$self->SUPER::send_or_die with the right parameters.
To test:
1. Apply the unit tests
2. Run:
$ kshell
k$ prove t/Koha/Email.t
=> FAIL: Sender is not handled correctly!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
The from parameter is correct!
No Sender header sent!
5. Sign off :-D
Martin Renvoize [Wed, 27 Oct 2021 14:37:07 +0000 (15:37 +0100)]
Bug 28904: Update team list to include newsletter editors
It seems we stopped recording the newsletter editor as part of the team
for a while :(.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 27 Oct 2021 14:27:45 +0000 (15:27 +0100)]
Bug 28904: Add newsletter editor to about page display
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Tue, 26 Oct 2021 19:52:24 +0000 (19:52 +0000)]
Bug 29329: Remove stray character in opac-detail.tt
1. Have OpacBrowseResults on.
2. Make search with many results.
3. Go to the record detail page
4. Click 'Browse results'
5. At the bottom of the container notice the stray "s".
6. apply patch
7. Try again, the "s" is gone!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Gustafsson [Wed, 15 Sep 2021 13:32:35 +0000 (15:32 +0200)]
Bug 27884: Add tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Create a new notice, for example with Koha module "Patrons",
name/code TEST and message body "<strong>testing<strong>".
2) Create a new sql report, the query could be someting like:
SELECT "<number>" as `borrowernumber`, "to@example.com", as `email`, "from@example.com" as `from`;
where "<number>" is a valid borrowernumber.
3) Run patron_emailer.pl --report=<id> --notice=TEST --module=members -commit
where <id> is the report id.
4) Check the message_queue table that the content_type column has been
set to text/html; charset="UTF-8".
5) Ideally process the message queue and veriy that the sent email is displayed
as rendered html.
6) Run tests in t/db_dependent/Reports/Guided.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Maryse Simard [Mon, 11 May 2020 18:20:42 +0000 (14:20 -0400)]
Bug 25459: Makes barcode position respect units in patron cards layout
When using any unit besides postscript points, barcode positionning
doesn't work correctly. There is an error in the calculation: the unit
factor must be applied to the individual card part only and not to the
full page position.
This patch moves the unit part of the calculation to the right place.
To test :
1. Create a working patron card setup, using postscript points:
card template, layout and card batch. Use barcode and at least
one other element (text or images) in the layout.
=> Some tips for testing:
- activate guides for the layout
- use a template and a batch containing more than one card; the
displacement will be different for each card and depend on the
barcode position relative to the bottom left of the entire page.
2. Change units from postscript points to any other unit.
=> At least for the layout, but changing it in the template will
scale the page as well.
4. Export the card batch.
3. Note the guides are scaled to fit the new unit and the lower left
corner of text and images are still correctly placed relative to the
guides, but the barcode is not.
=> In some cases, the barcode even seem to not print at all since
it's new coordinates are out of screen.
4. Apply patch.
5. Generate the batch again.
6. Note the barcode now appears exactly where it should.
Signed-off-by: George Veranis <gveranis@dataly.gr> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lucas Gass [Thu, 29 Apr 2021 14:36:03 +0000 (14:36 +0000)]
Bug 28263: Fix too_many auto renewal message
To test:
1. Make an item eligible for auto_renewal.
2. Set circ rule so only 1 auto_renewal is allowd.
3. Run auto_renew once, get a successful message.
4. Run it again and get the too_many error "You have reached the maximum number of checkouts possible."
5. This has nothing to do with the number of checkouts
6. Apply patch and updatedatabase.
7. Do 1-4 again.
8. Message is now "You have reached the maximum number of renewals possible."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 29356: Pickup location dropdowns should perform 'contains' searches
When placing a hold, the dropdowns for selecting a pickup library automatically right-truncate, so one can type "cen" and find Centerville.
On the Libraries page in Admin, however, the search box both left- and
right-truncates, so one can type "en" and find Centerville.
This patch makes the search perform 'contains' searches.
To test:
1. Try placing a hold. Make sure your rules allow Centerville to be a
valid pickup location.
2. Search 'cen'
=> SUCCESS: Centerville shows
3. Search 'en
=> FAIL: Centerville doesn't show
4. Apply this patch and reload
5. Repeat 2
=> SUCCESS: Works!
6. Repeat 3
=> SUCCSS: Centerville shows!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 29355: Make pickup location dropdowns RESTdefaultPageSize agnostic
This patch makes the select2 dropdowns for pickup locations not be
limited to the RESTdefaultPageSize syspref limit.
To test:
1. Have less than 20 libraries in your system as valid pickup locations
2. Place a hold via the staff client
=> SUCCESS: See that all your libraries appear in the pickup location dropdowns at the bib and item level
3. Update RESTdefaultPageSize, set the value to something lower than your count of pickup libraries
4. place another hold
=> FAIL: Your pickup location list gets cut off and only shows as many locations as RESTdefaultPageSize allows
5. Apply this patch
6. Repeat 4
=> SUCCESS: All your pickup locations show
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen [Thu, 28 Oct 2021 14:15:12 +0000 (14:15 +0000)]
Bug 29351: Add missing cn_source parameter to reports parameter menu
This patch adds an option to insert "Source of classification or
shelving scheme" as a runtime parameter in SQL reports. The ability to
use cn_source as a parameter seems to have always been part of this
feature but wasn't documented.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select
"Classification source."
- Customize the parameter label if you wish and click "Insert
parameter."
- The parameter should be inserted like this:
<<Source of classification or shelving scheme|cn_source>>
- Use it to create a valid SQL report, for example:
SELECT * FROM items WHERE cn_source = <<Source of classification or
shelving scheme|cn_source>> LIMIT 10
- Confirm that upon running the report you are prompted to select a
classification source.
- Confirm that the report runs correctly.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen [Thu, 28 Oct 2021 14:46:00 +0000 (14:46 +0000)]
Bug 29352: Runtime parameter labels should not be said to be optional
This patch alters the form shown when using the "Insert runtime
parameter" button in SQL reports. It makes the label field required and
removes "optional" from the field hint.
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select "Authorized
value."
- Clear the "parameter label" field and click "Insert parameter."
- The form should display an error asking you to fill in the label
field.
- Test that the category field is also required.
- Close the modal and select a different runtime parameter.
- Test again that the label field is required.
- Test that the form submits correctly when the label field is
populated.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen [Thu, 28 Oct 2021 15:45:21 +0000 (15:45 +0000)]
Bug 29328: Add missing list parameter to reports parameter menu
This patch adds an option to insert "list" as a runtime parameter in SQL
reports (As added by Bug 27380).
To test, apply the patch and go to Reports -> Create from SQL.
- Click the "Insert runtime parameter" button and select
"List."
- Customize the parameter label if you wish and click "Insert
parameter."
- The parameter should be inserted like this:
<<List of values|list>>
- Use it to create a valid SQL report, for example:
SELECT * FROM borrowers WHERE categorycode IN <<List of values|list>>
LIMIT 10
- Confirm that upon running the report you are shown a textarea. Enter
two or more values in the textarea, each on a separate line.
- Confirm that the report runs correctly. The SQL above would show you
this when you click "Show SQL code":
SELECT * FROM borrowers WHERE categorycode IN ('A','S') LIMIT 10
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 14 Oct 2021 17:56:23 +0000 (17:56 +0000)]
Bug 29242: Flatpickr - Should autocomplete be turned off?
This patch adds a step to Flatpickr initialization to add an
autocomplete attribute set to "off" so that browsers' built-in
autocomplete menus do not obscure the calendar.
To test you must be using a browser which has form history enabled.
Locate a form that includes a Flatpickr input field, e.g. Reports
-> Catalog statistics.
Fill the date fields and submit the form. Go back to the form and click
one of the form fields you previously filled out (once in Chrome, twice
in Firefox). The browser should not show its native form history
dropdown.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log