This method will allow to filter a patron set by a given subpermission.
It will be useful on bug 30055 where we want to display only patron
with suggestion or acquisition subpermission.
Note that it could be extended to allow several subpermissions, but we
don't need it so far.
Test plan:
prove t/db_dependent/Koha/Patrons.t
must return green
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 25285: Fix wrong message about required Koha version in plugins
When you install a plugin that requires a newer Koha version, it reports
this:
<<
Warning: This report was written for a newer version of Koha. Run at your own risk.
>>
It is wrong in a couple ways:
- It is not a report.
- It feels like it dates back to when plugins were only run i.e.
pre-hooks, etc.
This patch proposes a change to reflect this.
To test:
1. Verify the string changes make sense to you
2. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 2 Mar 2022 16:14:18 +0000 (16:14 +0000)]
Bug 30214: Add ACCTDETAILS notice to verified self registration
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, with varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
varified.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is enabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) Verify the user by following the link in the verification email you
should have received.
6) The new user should have been created and you should be able to see
the account details notice in their associated notices
7) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 2 Mar 2022 16:03:55 +0000 (16:03 +0000)]
Bug 30214: Add ACCTDETAILS notice to self registeration
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, without varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
created.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is disabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) The new user should have been created and you should be able to see
the account details notice in their associated notices
6) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Tue, 1 Mar 2022 16:24:55 +0000 (16:24 +0000)]
Bug 17648: (QA follow-up) Further code cleaning
We actually have a Koha::Patron method to do all the work of finding the
right patron primary email address for notices.. we can use that here
instead of doing it long hand.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle M Hall [Fri, 26 Feb 2021 18:16:58 +0000 (13:16 -0500)]
Bug 27812: Remove the ability to transmit a patron's plain text password over email
We should not give libraries the ability to compromise patron accounts,
it is considered a huge security issue and nobody in network security
would never recommend allowing passwords to be transmitted in clear text
over email.
It should simply not be possible to send a patron's password in plain text
via email. As such, we should remove this ability from Koha.
Test Plan:
1) Apply this patch
2) Create a patron to generate the ACCTDETAILS email
3) Note you can no longer transmit the patron's password in the email
Signed-off-by: Amit Gupta <amitddng135@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Thu, 24 Feb 2022 16:17:11 +0000 (16:17 +0000)]
Bug 30177: When editing an existing patron set message_prefs_dirty to true
1 - Define default messaging preferences for a patron category
2 - Go into an existing account and change the patron category to the
one set in step 1.
3 - Confirm that the messaging prefs have been reset to that of the
default patron category
4 - Apply patch
5 - Repeat Step 2, this time you should see a warning asking if you want
to set messaging prefs to the category default
6 - Press OK and save. Confirm that the messaging prefs are now set to
the default for that category
7 - Try it again with an existing account and press Cancel this time.
Notice that there should be no change to the patron messaging prefs.
8 - Try making a new patron and switching the category, you should see
no warning and the message prefs should be proberly set to the
defaults of any category you choose.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30212: Make Select2 available for ILL backends
This patch makes select2 available for ILL backend developers to use on
their templates.
To test:
1. Have a configured backed and an ILL request
2. Open the inspector and load any action on the backend (intranet)
=> FAIL: no select2 asset is transfered from Koha to the browser
3. Apply this patch
4. Reload
=> SUCCESS: There's select2
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Tue, 22 Feb 2022 16:54:03 +0000 (16:54 +0000)]
Bug 30155: Don't get items that can fillholds if there are no holds
This makes two changes:
1 - We no longer call get_items_that_can_fill if there are no holds
2 - The subroutine will return an empty Koha::Items object if there are no holds passed
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
we will move to 'Locale::XGettext::TT2' 0.7 when libintl-perl-1.32 arrives
https://tracker.debian.org/pkg/libintl-perl
small change, no test plan
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Petro Vashchuk [Mon, 17 Jan 2022 14:38:53 +0000 (16:38 +0200)]
Bug 29684: add honeypot to catch other warnings in the future
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Petro Vashchuk [Mon, 17 Jan 2022 14:31:08 +0000 (16:31 +0200)]
Bug 29684: Fix warn about js/locale_data.js (paycollect.pl)
To reproduce (paycollect.pl):
1) Prepare or use some existing patron with outstanding fines, go to
the accounting section and open page where you make payment towards all
fines.
2) The error message should have appeared in your log file about
"File not found : default/js/locale_data.js".
3) Apply the patch.
4) Open the edit page again, ensure that the new error massage like
that didn't appear.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Petro Vashchuk [Mon, 17 Jan 2022 14:17:51 +0000 (16:17 +0200)]
Bug 29684: Fix warn about js/locale_data.js (memberentry.pl)
To reproduce (memberentry.pl):
1) Head over to the patron details page, press edit button to open the
memberentry.pl page.
2) The error message should have appeared in your log file about
"File not found : default/js/locale_data.js".
3) Apply the patch.
4) Open the edit page again, ensure that the new error massage like
that didn't appear.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 3 Mar 2022 16:45:43 +0000 (16:45 +0000)]
Bug 30220: Purchase suggestion defaults to first library
This patch updates the OPAC suggestions form to update the variable
used to pre-select the logged-in user's library.
To test, apply the patch and make sure the "suggestion" preference is
set to "Allow."
- Log in to the OPAC and click "your purchase suggestions" in the
sidebar menu on your summary page.
- Click "New purchase suggestion."
- The selected library should match the logged-in user's home library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
George Veranis [Thu, 24 Feb 2022 14:10:14 +0000 (15:10 +0100)]
Bug 20362: (follow-up) Direct link to authority records missing in staff detail view (1xx , 7xx)
I change the magnigying glass icon to FA icon in the staff detail view
for 1xx and 7xx of the record that links to the authority records.
The following test plan is for 100 tag only but the patch can be apply
for all 1xx and 7xx tags that can be connect with an authority record.
Test Plan:
1) On the Koha staff page, create a new authority. The type of authority
will be: e.g Personal Name
2) When creating authority, in tab 1 under -HEADING--PERSONAL NAME enter
the personal name term entry element and then save the
new authority e.g. Twain, Mark.
3) In circulation, search the catalog for a random book. Click the title
of the book and you will be taken to the book details.
4) Edit the record and in tab 1 , scroll down the - MAIN ENTRY--
PERSONAL NAME and repeat this tag (the icon next to the title).
5) Edit the Personal name term entry element by clicking
the button on the right of the bar.
6) In the Search main heading ($a only) enter your personal name term
e.g. Twain, Mark.
7) Press search, and then in the table that pops up, click 'choose'.
8) Save your edits and the new personal name term will be in the 'By:'
of the book details.
9) Notice that there is no magnifying glass icon.
10) Apply this patch
11) Notice that there is now a magnifying glass icon next to the
personal name term.
12) Click on the magnifying glass and it will take you directly to the
authorities records
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
George Veranis [Tue, 11 Jan 2022 08:31:27 +0000 (09:31 +0100)]
Bug 20362: Direct link to authority records missing in staff detail view (1xx , 7xx)
I added a magnigying glass icon in the staff detail view for 1xx and 7xx
of the record that links to the authority records.
The following test plan is for 100 tag only but the patch can be apply
for all 1xx and 7xx tags that can be connect with an authority record.
Test Plan:
1) On the Koha staff page, create a new authority. The type of authority
will be: e.g Personal Name
2) When creating authority, in tab 1 under -HEADING--PERSONAL NAME enter
the personal name term entry element and then save the
new authority e.g. Twain, Mark.
3) In circulation, search the catalog for a random book. Click the title
of the book and you will be taken to the book details.
4) Edit the record and in tab 1 , scroll down the - MAIN ENTRY--
PERSONAL NAME and repeat this tag (the icon next to the title).
5) Edit the Personal name term entry element by clicking
the button on the right of the bar.
6) In the Search main heading ($a only) enter your personal name term
e.g. Twain, Mark.
7) Press search, and then in the table that pops up, click 'choose'.
8) Save your edits and the new personal name term will be in the 'By:'
of the book details.
9) Notice that there is no magnifying glass icon.
10) Apply this patch
11) Notice that there is now a magnifying glass icon next to the
personal name term.
12) Click on the magnifying glass and it will take you directly to the
authorities records
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Adam Styles [Tue, 22 Feb 2022 00:32:52 +0000 (11:32 +1100)]
Bug 30159: Fix Check() to validate both mandatory and important fields
This patch adds a check for both mandatory and important fields when
validating bibliographic records during cataloguing.
To test:
1. Go to Admin -> Biblio frameworks. View the MARC structure of your
default framework.
2. Search for tag 082. Edit the subfields for this tag.
3. Check the 'important' checkbox for subfield a and Save.
4. Go to add or edit a new biblio record under Cataloguing.
5. Ensure the 082$a field is empty and hit Save.
6. Notice the confirmation pop-up is an unreadable display of HTML.
7. Click Cancel on the pop-up box.
8. Apply the patch and refresh the editor page.
9. Ensure the 082$a field is empty and hit Save.
10. Notice the confirmation pop-up is more helpful this time. Click
Cancel on the pop-up box.
11. Notice the 082$a field is displayed at the top of the page as an
important field that is missing information. Use the 'go to field'
link and confirm this works as expected.
12. Leave 082$a empty and hit Save.
13. This time click OK on the confirmation pop-up. Confirm you are able
to save your record as normal.
Sponsored-by: Education Services Australia SCIS Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Mason James [Sat, 5 Mar 2022 02:30:21 +0000 (15:30 +1300)]
Bug 19169: Add a test to detect unneeded 'atomicupdate' files
to test...
1/ set git repo
$ git reset --hard v21.11.03
2/ run test
$ prove ./t
OK
3/ apply patch
4/ run test again, observe FAIL
$ prove ./t/00-check-atomic-updates.pl
./t/00-check-atomic-updates.pl .. 1/?
# Failed test 'check for unhandled atomic updates: bug_29596.pl'
# at ./t/00-check-atomic-updates.pl line 34.
# 'bug_29596.pl'
# matches '(?^u:.*pl$)'
# Looks like you failed 1 test of 3.
./t/00-check-atomic-updates.pl .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/3 subtests
JD Amended patch: fix copyright year Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 27 Jan 2022 13:14:27 +0000 (14:14 +0100)]
Bug 29956: Prevent login form to be serialized into cookie
To recrate:
Logout
Go to /cgi-bin/koha/opac-search.pl
Click "Log in to your account"
Fill in the login form
Submit
Check the 'form_serialized' cookie's value
=> Without this patch it contain login/password
=> With this patch applied the cookie is not created
Confirm that the "Return to the last advanced search" feature still
works as expected.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Mon, 24 Jan 2022 10:24:08 +0000 (10:24 +0000)]
Bug 29931: Check cookie status before continuing
Test plan:
Logout from staff.
Try to run plugins-enable (you should have some active plugin).
Like: https://yourserver:staffport/cgi-bin/koha/plugins/plugins-enable.pl?class=Koha::Plugin::Test&method=enable
Replace class and method as appropriate.
Verify that with this patch, you will be redirected to 401 page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the status attribute an ENUM, setting the default value
as 'requested' as well. The chosen names are easier to read than single
letters. Also, renamed F into fulfilled (this impacts methods names as
well). This is because 'finished' or 'completed' is more a synonym for
old => 1...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Wed, 2 Mar 2022 14:33:06 +0000 (14:33 +0000)]
Bug 19532: (QA follow-up) Fix fine calculation by inserting biblionumber
The fines cron job uses Getoverdues to pass issue info to CalcFine.
It took me a while to realize that the overdue hash does not contain
a biblionumber. When testing CalcFine, we pass an item hash that
does include one.
So what happened? $item->{biblionumber} is undefined when it comes from
Getoverdues and no recall overdue fine is calculated, only a regular one.
Simple fix (without any impact): Add a biblionumber to Getoverdues.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with fines.pl: recall fine applied now.
Ran some Circulation and Overdues unit tests. Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Fri, 25 Feb 2022 08:53:11 +0000 (08:53 +0000)]
Bug 19532: (QA follow-up) Fixing unit tests
(Trivial:) Number of tests in Koha/Item.t
Added a $patron object to resolve warnings like:
* Global symbol "$patron" requires explicit package name (did you forget to declare "my $patron"?) at t/db_dependent/Koha/Patron.t line 1064.
Fixed CanItemBeReserved call in Holds.t, number of tests adjusted
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Aleisha Amohia [Wed, 28 Oct 2020 03:15:39 +0000 (16:15 +1300)]
Bug 19532: (follow-up) Fixing OPAC display and staff client errors
- fixes the displays of opac-recalls.pl and opac-recall.pl
- fix the error on Recalls to pull page
- fix JS error preventing Recalled link from showing in checkouts table
- fix cancelling of recall when checking out item
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Aleisha Amohia [Mon, 11 May 2020 23:52:09 +0000 (23:52 +0000)]
Bug 19532: Recalls on intranet
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Aleisha Amohia [Mon, 11 May 2020 23:52:52 +0000 (23:52 +0000)]
Bug 19532: Recalls on OPAC
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 19532: Expiry and overdue cronjobs, and overdue fine calculation
- misc/cronjobs/recalls/expire_recalls.pl
- misc/cronjobs/recalls/overdue_recalls.pl
- tests for overdue fines in t/db_dependent/Circulation/CalcFine.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 25 Feb 2022 20:04:41 +0000 (20:04 +0000)]
Bug 22993: Handle default messaging preferences during patron creation from API
TO test:
1 - Set default messaging preferences for a patron category
2 - Create a patron in that category using the API
3 - Verify messaging preferences are not set
4 - Apply patch, restart all
5 - Create another patron
6 - Verify messaging preferences are correctly set
7 - prove -v t/db_dependent/api/v1/patrons.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 25 Feb 2022 20:04:14 +0000 (20:04 +0000)]
Bug 22993: Unit tests
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 4 Mar 2022 16:48:19 +0000 (16:48 +0000)]
Bug 15594: (QA follow-up) Move span to publisher name, fix whitespace, only add spaces once per loop
This patch updates the whitespace for readbility
Moves the Ogranization span to the subfield b, publisher name only
Moves check for last/whitespace to the loop
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The Minh Luong [Thu, 3 Mar 2022 20:03:57 +0000 (15:03 -0500)]
Bug 15594: Class in now unchanged after the patch
I'm not sure if this is the actual issue, but I found that the patch puts the span with
the class "publisher_name" inside a new span with typeOf="Organization".
In this patch, I removed that new span, to keep it coherent with the previous code.
Also, the MARC 260 subfields are displayed correctly !
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Blou [Wed, 8 Dec 2021 21:45:29 +0000 (16:45 -0500)]
Bug 15594: preserve sequence of 260 subfields in (staff) detail page
When ordered $a$b$a$b$c in the MARC object, 260 subfields are displayed
$a$a$b$b$c. This goes against the standard.
This patch preserves the order.
0) create a notice with $a$b$a subfields. In that (mixed) order.
1) Go to staff detail page and see the fields displayed as "aab"
2) apply the patch
3) validate the aba display.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Blou [Mon, 6 Dec 2021 18:48:30 +0000 (13:48 -0500)]
Bug 15594: preserve sequence of 260 subfields in detail page
When ordered $a$b$a$b$c in the MARC object, 260 subfields are displayed
$a$a$b$b$c. This goes against the standard.
This patch preserves the order.
0) create a notice with $a$b$a subfields. In that (mixed) order.
1) Go to detail page and see the fields displayed as "aab"
2) apply the patch
3) validate the aba display.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 2 Mar 2022 14:23:36 +0000 (14:23 +0000)]
Bug 30190: Green buttons turn blue for a second when clicking them
This patch adds additional CSS to better cover various states of buttons
in the OPAC.
To test, apply the patch and rebuild the OPAC CSS:
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
- In the OPAC, test various green buttons in varous states: default,
hover, and active (the appearance when the button is clicked but
before the mouse button is released).
- The button should be styled in various shades of green in all cases.
- Test a disabled button by performing a catalog search.
- On the results page, before any checkboxes are checked, the "Save"
button should look correct.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Mon, 7 Feb 2022 16:27:37 +0000 (17:27 +0100)]
Bug 29136: Don't redirect if the whole set is > 1
To prevent a redirect when we click on a page with only 1 result
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Tue, 1 Feb 2022 10:06:49 +0000 (11:06 +0100)]
Bug 29136: Ajaxify the patron search when placing a hold
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch tackles a very specific scenario. Calling split(...,
CGI::param) makes it be called in list context. The split docs say:
split /PATTERN/,EXPR,LIMIT
this means the first CGI param will be used as EXPR and the second one
as LIMIT, which is wrong anyway. So the fix is to just force scalar
context.
To test:
1. Not sure, just make sure nothing breaks when using the scripts in the
browser.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I squashed the patches because they are too trivial to have a test plan.
Or it is too much work to write the test plan for such trivial cases. I
leave the original commit messages just in case.
Generally, this are all cases in which CGI::param is being called in a
trivially identifiable _list context_. i.e. they are assigned to a
@variable.
I left one case out on purpose: admin/auth_subfields_structure.pl
Paul introduced this:
my @kohafield = ''.$input->param('kohafield');
and then:
my $kohafield = $kohafield[$i];
My intuition says it is forcing scalar context on the first assignment
so the list contains a single element and then inside the loop some
$kohafield assignments should lead to undef, and even warnings. I leave
it for a separate patch because it is not that easy testable and is a
sensible area.
Bug 29771: Remove warning from acqui/finishreceive.pl
This patch removes a warning that shows when receiving.
To test:
1. Do the acq workflow up to the receive step.
2. Once you choose the items and click on Finish
=> FAIL: There's a warning in the logs
3. Revert receipt
4. Apply this patch
5. Receive
=> SUCCESS: No more warnings
6. Sign off :-D
Bug 29771: Remove warning from svc/members/add_to_list
To test:
1. Run:
$ tail -f /var/log/koha/kohadev/*-error.log
2. Generate a patron list
3. Perform a patron search that gives you a few
4. Select some, and choose to add them to the list
=> FAIL: The logs show the infamous warn:
CGI::param called in list context from /kohadevbox/koha/svc/members/add_to_list
5. Apply this patch
6. Restart plack and repeat 4
=> SUCCESS: No warn!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Thu, 3 Mar 2022 10:27:20 +0000 (10:27 +0000)]
Bug 30203: Circulation.t: prevent locking by setting envvar
Running this test without prove is disastrous. The LOCK in
the called SendCirculationAlert will ruin your data.
But no longer when you apply this patch.
Test plan:
Run prove Circulation.t
Inspect your data (e.g. borrowers table).
Run perl Circulation.t
Inspect your data (e.g. borrowers table) again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 28782: Use query param list instead of splitting elements using '/'
This removes the need to handle single and multiple cases separately,
thus removing bunch if-else cases and simplifying our code. This
coding style is also in line with our other .pl scripts.
To test:
1) Make sure placing a hold still works from the following pages:
Fridolin Somers [Fri, 25 Feb 2022 00:24:18 +0000 (14:24 -1000)]
Bug 30147: Fix modules usage in opac-detail.pl
On the ktd sample database when trying to go to the detail page from the result list:
Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_opac_opac_2ddetail_2epl::searchResults called at /kohadevbox/koha/opac/opac-detail.pl line 260
Turning off OpacBrowseResults makes the error disappear.
In opac-detail.pl, use C4::Search is missing searchResults and getRecords
To test:
- Search for something that gives several result pages in OPAC, example: e
- Switch to one of the last pages using link on top of results, example: 10
- Open any of the records listed in detail view
- Verify that the error is shown
- Apply patch and repeat, error is gone and browsing behaves as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Sat, 8 Jan 2022 01:34:49 +0000 (15:34 -1000)]
Bug 29826: Manage call of Template Plugin Branches GetName() with null or empty branchcode
Bug 26587 added a concatenation that sends a warning if var is undef :
$ prove t/db_dependent/Template/Plugin/Branches.t
Use of uninitialized value $branchcode in concatenation (.) or string at /kohadevbox/koha/Koha/Template/Plugin/Branches.pm line 35.
This patch adds an early return empty string when GetName is called with $branchcode null or empty string.
Test plan :
1) Run t/db_dependent/Template/Plugin/Branches.t without patch
2) Run with the patch to see warning disappear
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Mon, 14 Feb 2022 18:38:16 +0000 (18:38 +0000)]
Bug 30098: Only redirect from patron search if single result is on first page
This patch simply adds a check that we are oin the first page (starting at result 0)
before redirecting to a isngle patron
To test:
1 - Perform a patron search that returns 41 results, on Koha testing docker, 'a' works
2 - Go to second page of results, works
3 - Go to third page of results, redirected to the patron
4 - Apply patch
5 - Repeat search and paging
6 - On third page you remian in results and are not redirected to patron
Marion Durand [Mon, 18 Oct 2021 12:35:21 +0000 (14:35 +0200)]
Bug 26269: "Date due to" and "Show any items currently checked out" filters doesn't work properly in overdues.pl
Filter "Date due to" is now taken into account even when filled with a
future date for the displayed result and downloaded results.
Filter "Show any items currently checked out" is now taken into account
for the downloaded results.
To test:
1- Go to Circulation then to overdues
2a- Add a filter with "Date due To" > today
2b- Check that only the results with "Due date" < today are displayed
(not those with "Due date" between today and the date requested)
2c- Click on "Download file of displayed overdues"
2d- Check that the file contains only the results with "Due date" <
today (not those with "Due date" between today and the date requested)
3a- Reset filter and then add the filter "Show any items currently
checked out"
3b- Check that all the results are displayed (even those with "Due date"
> today)
3c- Click on "Download file of displayed overdues"
3d- Check that the file contains only the results with "Due date" <
today (not those with "Due date" between today and the date requested)
9- Apply the patch
10- Repeat step 1 to 8, checking that all the results corresponding to
the selected filter are now displayed/downloaded
David Gustafsson [Wed, 13 Oct 2021 13:36:43 +0000 (15:36 +0200)]
Bug 29220: Minor fixes and improved code readability
The current handling of onsite checkouts with OnSiteCheckoutsForce
syspref enabled is confusing and hard to understand. It's also fragile
with a high risk future changes could result in subtle bugs.
Also fix an inconsistency in which errors (DEBT_GUARANTORS) are considered blocking for
forced onsite checkouts.
To test:
1) Enable OnSiteCheckouts, disable OnSiteCheckoutsForce
2) Edit a biblio item and for example set Not for loan to a value
restricting loans
3) Try to check out the item for some patron
4) A message that item is not for loan should be displayed
5) Select "On-site checkout" and try again
6) The same message should be displayed
7) Try to checkout with some invalid barcode
8) A message that barcode was not found should be displayed
9) Now enable OnSiteCheckoutsForce
10) Try to checkout the item for some patron
11) A message that item is not for loan should be displayed
12) Select "On-site checkout" and try again
13) Checkout should now succeed, no messages should be displayed
14) Try to checkout with some invalid barcode
15) A message that barcode was not found should be displayed
16) All of the above steps should produce the same result with and without this patch
Additional:
Before patch:
a) Set NoIssuesChargeGuarantorsWithGuarantees to 1
b) add a guarantee with another guarantor
c) charge a 1.01 fine to other guarantor
d) checkout is blocked due to fines
Apply patch
e) checkout is allowed when onsite checkouts forced
Sponsored-by: Gothenburg University Library Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29877: Make POST /holds handle maxreserves correctly
The current implementation doesn't consider the following values for the
syspref: undef and 0.
The tests mistakenly didn't cover them.
To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> FAIL: Tests fail, obvious warnings about comparing undefined values
too.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. You can try on Postman as well
=> SUCCESS: Behavior is correct!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log