Owen Leonard [Wed, 5 Jun 2013 16:22:02 +0000 (12:22 -0400)]
Bug 9032: (follow-up) adjust the "share a list" template
This patch makes a few changes to the "share a list" template:
- We don't use tables for layout of forms. This patch corrects the
display of the share form to use Koha standard form markup.
- Revise the confirmation message displayed after a list is shared to be
more readable.
- Add a link back to private lists to the confirmation message.
- Add T:T markup to make this page display the left-hand navigation
which is shown on other patron-related pages when a user is logged in.
To test, apply this patch on top of other patches pending for Bug 9032
and confirm that the list share form looks correct and works correctly.
Confirm that share confirmation page reads well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 20 May 2013 15:57:39 +0000 (17:57 +0200)]
Bug 9032: add ability to invite another to share a private list
This patch
- Adds a Share button for OPAC private lists.
- Allows you to send an invitation to share a list.
- Checks on validity of email addresses (with Email::Valid).
Test plan:
1) Sharing depends on syspref and login.
Toggle the pref OpacAllowSharingPrivateList.
If enabled, you should see the Share button in OPAC/Private lists.
Click on the Share button. You should get Share a list.
Logout and try to go back to opac/opac-shareshelf.pl
It should now present you the login form.
2) Try to share a public list or a list you do not own.
Find a security hole in the interface. Or hack the shareshelf URL and
replace the shelfnumber with a public list number.
3) Enter no email address or invalid ones (no domain, forbidden chars).
If you enter no address, submit should not work.
If you enter only wrong addresses (separated by: ,:; ), you get a
message.
4) Test if sending the invitation works.
Share one of your private lists. Enter your own email address.
After your proc_message_queue cronjob ran, you should have an email.
Check also if you see a new record in the virtualshelfshares table.
Note that the followup patch handles the second part of accepting this
share.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Fri, 14 Dec 2012 16:56:36 +0000 (11:56 -0500)]
Bug 9288 - Add a script to test SIP from the command line
This is a very basic start to a sip server testing script.
I imagine we will want to make it interactive in end,
essentially replicating what a SIP based self-checkout machine does.
Signed-off-by: Adrien Saurat <adrien.saurat@biblibre.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This patch moves the humanmsg jQuery plugin to
intranet-tmpl/prog/lib/jquery/plugins so that it will not be duplicated
for each set of translated templates.
To test, apply the patch and modify a system preference. The
modification messages should appear normally.
Patch works as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described.
No regressions found.
Bug 11596: (follow-up) ensure all warnings are reported
This patch implements the intent of a patch by Jonathan Druart
that no longer applies cleanly, and ensures that if there are
both warnings about (say) no active currency and missing indexing
mode parameters, that both get reported.
Bug 11596: report warnings on the about patch if indexing options in koha-conf.xml are missing
To test:
- Have a clean master install
- Verify that koha-conf.xml contains valid entries for:
zebra_bib_index_mode and
zebra_auth_index_mode
- Go to More > About Koha > System information
=> No "Warnings regarding the system configuration"
- Apply the patch
- Go to More > About Koha > System information
=> No "Warnings regarding the system configuration"
- Edit your koha-conf.xml file commenting one or both indexing mode
entries.
- Go to More > About Koha > System information
=> You get "XML configuration file" warnings for each commented entry.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds :w and :p versions to the index for »Lexile number«
(it has only :n so far) and adds indexes for 653 (Index term
uncontrolled), 655 (Index term Genre/Form), 041 (language-audio) and
041 (language-subtitle). It also adds the »curriculum«-index to
Search.pm.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 17 Nov 2013 17:37:59 +0000 (18:37 +0100)]
Bug 11248: (follow-up) fix template for translated list emails in staff
- Fixes some capitalization problems
- Adds an URL filter
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 14 Nov 2013 13:00:46 +0000 (14:00 +0100)]
Bug 11248: fix encoding issue on emailing a list (INTRANET)
Test plan:
- send a list via email with the english version.
- translate templates and retry with another language.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Sending an intranet list from translated templates requires
a new list template for the intranet. I have added the needed
changes in a follow-up.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 5 Mar 2014 14:08:13 +0000 (15:08 +0100)]
Bug 8258: Use patron's library's notice for DUEDGST and PREDUEDGST
If a notice is defined for the library of the patron, it should be
used.
Without this patch, the notice used is the one defined for all
libraries.
Test plan:
1/ Set the advanced notice for a patron using digest.
2/ Check one item out to this patron (backdate the return date according
the days in advance value).
3/ launch advance_notices.pl -c
4/ Verify the notice used is the default one.
5/ Define a notice for the library of the patron for PREDUEDGST
6/ launch advance_notices.pl -c
7/ Verify the notice used is the one previously defined.
8/ Check one item out to this patron (date due = today)
9/ launch advance_notices.pl -c
10/ Verify the notice used is the default one.
11/ Define a notice for the library of the patron for DUEDGST
12/ launch advance_notices.pl -c
13/ Verify the notice used is the one previously defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test case: User from Library A, checked out books
- in library A from A and B
- in library B from B
Verified, that the 'all libraries' notice is still used,
when no specific notice is defined.
Verified, that the patron's home library noticed is used,
when defined.
Note: Before and after the patch we print the branch information
from the patron's home library, so also using the template from
this branch, seems logical. All items over all branches are
processed into one single reminder email, before and after the patch.
Jonathan Druart [Wed, 13 Nov 2013 13:57:55 +0000 (14:57 +0100)]
Bug 11243: make vendor list distinguish between active and canceled items
On the vendor result list, the "Item count" columns contain the sum of
all items ordered for a basket. But if an order is canceled, the item
count is not really meaningful.
This patch just adds, in parenthesis, the number of items canceled.
Test plan:
- create a basket and 3 orders with different number of items
- cancel 1 order
- verify on the supplier list that the number of items is correct and
the number of canceled items is correct too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Note: In case the biblio was deleted when the order was cancelled,
the number of biblios will be off.
Mark Tompsett [Tue, 18 Mar 2014 15:44:42 +0000 (11:44 -0400)]
Bug 11253: tools/inventory.pl: fix handling of inventory date
This patch fixes a stray call to output_pref() that had not been
updated by the patch for 10380, which caused a crash when uploading
a barcode file when the dd/mm/yyyy dateformat is in use.
TEST PLAN
---------
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
KABOOM!
Apply patch
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
Table displays dates in "Unseen since" column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Before the patch, I had this error when using dateformat=ddmmyy:
Template process failed: undef error - The 'day' parameter ("2014") to DateTime::new did not pass the 'an integer which is a possible valid day of month' callback at /usr/local/share/perl5/Params/Validate/PP.pm line 633.
This patch corrects the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed problem before applying the patch. Tested with the
patch all dateformat setting still work correctly.
Fridolyn SOMERS [Fri, 15 Nov 2013 09:43:21 +0000 (10:43 +0100)]
Bug 11254: make reservoir search normalize ISBNs
When importing records, the ISBN is normalized and stored
into database (see C4::ImportBatch::_add_biblio_fields). But when
searching with ISBN into reservoir, it is not normalized
(see C4::Breeding::BreedingSearch). So search does not match.
This patch adds the normalisation to reservoir search. Also, it
replaces call private method _isbn_cleanup by GetNormalizedISBN,
the correct public method. Also allows the reservoir search
on ISBN with hyphens.
This is intended to fix only reservoir searches.
Revised Test plan
-----------------
1) Back up DB
2) Save copy of attached example somewhere findable
2) Home -> Tools -> Stage MARC records for import
3) Click Browse and select the example MARC file
4) Click Upload file
5) Tweak as desired then click Stage for import
6) Click Manage staged records
7) Click Import this batch into the catalog
8) Home -> Cataloging
9) In the Cataloging search text box type 978-0-691-14289-0 and
click Submit
-- ISBN13 with hypens not found in reservoir
10) In the Cataloging search text box type 9780691142890 and
click Submit
-- ISBN13 without hypens not found in reservoir
11) In the Cataloging search text box type 0-691-14289-0 and
click Submit
-- ISBN10 with hypens not found in reservoir
12) In the Cataloging search text box type 0691142890 and
click Submit
-- ISBN10 without hypens found in reservoir
13) Apply patch
14) Repeat steps 9-12, this time it is always found! :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11912: (refactoring followup) make GetMarcISBN implement its advertised API
The current implementation of GetMarcISBN contradicts the documented API.
It currently returns an array of hashes with only one key (marcisbn)
which doesn't add any value to it.
I chose to fix GetMarcISBN to honour the API instead of changing thex
docs, because it seems a really silly change.
To test:
- Run:
prove t/db_dependent/Biblio.t
=> SUCCESS
- catalogue/detail.pl should correctly show ISBNs.
- opac/opac-detail.pl should correctly show ISBNs in both prog and bootstrap.
- opac-opac-sendshelf.pl should correctly show ISBNs in the email.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11912: fix problem where GetMarcISBN wrongly prepends a space to ISBNs
This patch makes the logic inside GetMarcISBN simpler and
fixes the issue.
To test:
- Run the regression tests:
prove -v t/db_dependent/Biblio.t
=> FAIL
- Apply the patch
- Run:
prove -v t/db_dependent/Biblio.t
=> SUCCESS
- Verify that opac-detail.pl and catalogue/detail.pl look as usual regarding ISBN
- Sign off
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
blou [Wed, 2 Oct 2013 19:05:38 +0000 (15:05 -0400)]
Bug 10986: add system preference to limit the list of languages in advanced search
In Advanced Search, the list of available language is long and will only
get longer. For a library offering books in 2-3 languages, that is
offering too many options to the user (most of the small libraries we
deal with only offer documents in two languages).
Code changes:
Languages.pm: Extract getAllLanguages to make a more customizable
getLanguages (have getAllLanguage call it, so rest of codebase is
oblivious to the change). Build array returned based on system pref if
corresponding argument is set.
search.pl and opac-search.pl: call getLanguages instead of
getAllLanguages.
TESTING
0) All language codes are iso 639-2 (three characters)
1) in OPAC, Advanced search, open Language box, acknowledge 30+ items.
2) in Intranet, go to system preferences AdvancedSearchLanguages,
enter "ita|eng"
3) back in OPAC, refresh screen, acknowledge only Italian and English
are listed.
4) in Intranet, click Search then click "More options" to make the
Language box appear. Acknowledge limited options.
5) Regression Test: Back to the preference, empty the field then save.
Go back to the OPAC and Intranet search, refresh the page, then the
Language drop-box will now contain 30+ items.
Bug 10951: (follow-up) use Koha.Preference() template function
This patch uses the TT helper function Koha.Preference() to
retrieve the value of NoLoginInstructions rather than passing
it to all templates as a template variable.
blou [Fri, 4 Oct 2013 17:25:33 +0000 (13:25 -0400)]
Bug 10951 - Adding NoLoginInstructions to system preferences
On a failed login, the default message is harcorded into opac-auth.tt.
It would be preferable to allow for a preference to override that message (for example: ...Please bring an ID to t
The changes modify
-opac-auth.tt to allow for custom value
-admin/preferences/opac.pref to add it to the preferences with a description
-C4/Auth.pm for the loading of the preference
-sysprefs.sql
-updatedatabase.pl
TESTING
1) in OPAC, logged out, try login in by entering no or wrong credentials. Acknowledge the "Don't have a p
2) Apply the patch
3) Regression Test: Redo step 1. Same (default) message should appear.
4) Log in to intranet,
- select NoLoginInstructions in system preferences.
- Enter new (xml) message. Possible:
<h5>Welcome to Koha, please bring your passport to the front office</h5>
- and save
5) refresh the OPAC, try login again with invalid credentials. The new message should appear.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Jonathan Druart [Thu, 9 Jan 2014 16:53:04 +0000 (17:53 +0100)]
Bug 11489: (OPAC prog theme) show facets only if there is a result to display
If all results are hidden, the facets are displayed.
With this patch, the facets are hidden too.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Michot <nmichot@voila.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Tested:
- Record with 1 lost item, result list = 1
- Verified without both patches 404 error page is shown
- Verified with 1st patch, no results page is shown
- Verified with 2nd patch, the still showing facets are gone
- Record with 1 lost item, result list > 1
- Record is hidden from result list, but
- result count is wrong
- result numbering is wrong
> This is an old problem, just noting
- Record with 1 lost and 1 available item, result list = 1
- Detail page is shown, only lost item is hidden
- Record with 1 lost and 1 available item, result list > 1
- Only available item is shown in result list
Also checked that the lost item shows up with hidelostitems off.
Kyle M Hall [Tue, 7 Jan 2014 17:19:37 +0000 (10:19 -0700)]
Bug 11489: in OPAC search, display "no results" when the only search result is suppressed
If hidelostitems is enabled, and the result of an opac search is a single
lost item, then the OPAC will display a 404 error, rather than a
"no results" screen.
Test Plan:
1) Catalog a record/item such that it is the only result for some search
e.g. Give it the title 'zxcvb'
2) Enable hidelostitems
3) Mark this item as lost
4) Perform an OPAC search that should result in a redirect to this record
5) Notice you a redirected to a 404 error
6) Apply this patch
7) Repeat step 4
8) Note you new get a "No results found!" page instead
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Michot <nmichot@voila.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9416: (follow-up) reconcile with work done on bug 11699
This patch teaches the ordering receiving process how to
set vendor and internal order notes.
One observation: I'm not sure it's entirely useful to set
a note to communicate to the vendor during receiving --
how is it to be sent to them, and why?
Bug 9416: (follow-up) fix neworderempty and templates
This followup answer QA remarks :
- neworderempty.pl updated so that the 2 new variables are passed
to the template
- modordernotes.tt fixed to make the translation easier
- in CSV headers, to make clear that no change are made for the moment,
rename "note" to "internal note"
Additionnaly, "Publisher code" was wrong in the csv headers. I changed
it to "Publisher" (the field in database is publishercode, but the
content is a real publisher name, not a code)
I did not change "Note:" in modordernotes.tt, because it is just under
a h1 tag which specifies the type of note the librarian is editing.
Test plan :
- edit an existing order, and try to change/add/delete the vendor note,
and the internal note. Check the changes are properly saved
- export a basket and a basketgroup in CSV. Check the columns headers
are "Publisher" and "Vendor note"
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs. Passes QA script and tests.
Tested:
- add notes when creating an order
- edit notes modifying an order line
- edit notes using the links on the basket summary
- check basket CSV export
- close basket
- check basket group CSV export
- edit notes on order receive page using the links
- edit notes on receive
Note: Translatability of templates could be improved by a follow-up.
It's better not to divide up sentences with if/else structures.
Mathieu Saby [Mon, 17 Feb 2014 00:11:42 +0000 (01:11 +0100)]
Bug 9416: add new order vendor note field
Currently, there is a single note field in each order. It would be
useful to have 2 notes fields:
- one for the staff (ex: "catalog this book as soon as possible")
- one for the vendor (ex: "urgent", "only the 2d volume"...), which
could later be printed in basketgroup pdf for example
This patch adds a new note made for vendor in each order. The existing
note is renamed "internal note".
The behavior of the 2 notes are the same
Changes in database structure:
- new column aqorders.order_vendornote
- column aqorders.notes renamed aqorders.order_internalnote
To test :
[1] Make a complete acquisiton process (creating the order > looking at
the basket > looking the order > receiving); and try to use the 2
notes (internal note / vendor note)
[2] Check the changes made on one page (eg detail of the order) are
saved and visible on an other page (eg receipt page)
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Jonathan Druart [Wed, 5 Mar 2014 12:07:53 +0000 (13:07 +0100)]
Bug 11699: fixed saving notes entered when receiving orders
Revised test plan:
1/ Create an order with 2 items
2/ Receive 1 item and enter a note for the order
3/ Verify the note is not saved
The note should be visible on the Mod Order Details screen,
but it isn't there.
4/ Apply patch
5/ Receive the second item and enter a note for the order
6/ Verify the note is correctly saved
The note is visible on the Mod Order Details screen.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described. The note now saves correctly and also remains when
you undo a receipt.
Note: it would be nice to show the note on the receive page as well. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This relevance sets title as phrase in priority and then any index.
This patch adds title as words list before search on any index, so
that records with all searched terms in title, even not well ordered,
are more relevant.
Test plan :
- Enable QueryWeightFields syspref
- Perform a search, with sort by relevance, with two words ofen
contained in title, but never one near the other.
For example: 'History France'
=> Records with both words in title are first. For example:
"Histoire de France" and "La France : 100 ans d'histoire"
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Relevance ranking and field weighting are hard to test,
as many MARC fields are indexed into the used indexes.
If we had an index that only indexed 245$a/200$a the
effect might be more visible.
I found no regressions by this patch, change reads
logical.
Bug 11508: fix untranslatable pull-down in auth_subfields_structure.pl
This patch replaces occurrences of CGI::scrolling_list with
untranslatable labels. It also fixes capitalization.
To test
1. Go to Administration > Authority types,
click 'MARC structure' of any auth type,
click 'subfields' for any Tag >= 010,
clic 'Edit subfields'
Check pulldowns 'Managed in tab' and 'Select to display or not'
2. Apply the patch
3. Reload and verify functionality of both pulldowns
4. Check that strings are not present on staff PO file
egrep "^msgid \"(Show all|Hide all|ignore)" misc/translator/po/fi-FI-i-staff-t-prog-v-3006000.po
5. Update language file
(cd misc/translator/; perl translate update fi-FI)
6. Check that strings are now present, repeat 4.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: drop-downs work identically. Show all, Hide all, and
ignore were added to the po files too.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described and improves the page to manage authority
subfields.
Jonathan Druart [Tue, 29 Oct 2013 14:03:41 +0000 (15:03 +0100)]
Bug 9216: make columns.def file translatable
The SQL column headers is stored into the columns.def file.
This file is not managed by the translation script.
This patch makes possible the headers translation.
Note: The translation xml tags were added to avoid all lines being put
on a single line.
Test plan:
1/ update your po file
cd misc/translate;
perl translate -f columns update LANG # Replace by another language here
2/ translate header columns (search "columns.def" in your po file).
3/ install the translated columns.def
perl translate -f columns install LANG # Replace by another language here
4/ go on the report module > create a new report > next > next
5/ change the language
on the 3rd step, you should see the column header translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
[on es-ES about a third of the strings translated!! :-) ]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a long standing translation
problem.
Passes all tests and QA script.
Francesca Moore [Tue, 14 Jan 2014 23:03:51 +0000 (12:03 +1300)]
Bug 11231: remove reference to ambiguous notes column from two hold request reports
The 'notes' column has been removed from the pending holds and hold
ratios reports as they were not displaying in the first place.
1.apply patch
2.verify that both reports work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Fri, 22 Nov 2013 10:00:21 +0000 (11:00 +0100)]
Bug 9578: avoid a search crash when attempting to sort results of invalid query
When searching with a sort (means not by relevance) and there is an error
in Zebra connexion (server is down or query is wrong), you get the message :
Error : Can't call method "sort" on an undefined value at /home/kohaadmin/src/C4/Search.pm line 405.
This patch corrects by not performing sort if there are no no results.
Steps to reproduce the error without patch:
In OPAC go to Advanced Search
Choose "Title" in first "Search for:" end enter "ccl=( and )"
Display "More options"
Set "Sort by" to "Title (A-Z)"
Click "Search" at bootom of page
Result:
Error:
Can't call method "sort" on an undefined value at /usr/share/kohaclone/C4/Search.pm line 430.
After applying the patch, try that search again. This time,
it should report not results found with out the error message.
Alternative Test plan :
- Set OPACdefaultSortField on something else than relevance
- Perform a simple search with a wrong CCL query. For example : ccl=( and )
=> You get the messge : No results found ...
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds another check to prevent a bad Zebra error message.
Works as described, passes all tests and QA script.
This patch adds a regression test for the condition noted
in bug 9578, where attempting a sort of a Zebra search that
fails because of an invalid query crashes.
Jacek Ablewicz [Mon, 10 Feb 2014 09:09:21 +0000 (10:09 +0100)]
Bug 11680: (follow-up) fix unexpected tax rate changes on edit
Follow-up to fix similar issue on vendor edit.
If the tax rates in Acquisitions -> gist system preference
are entered with trailing zeroes, given vendor tax rate value
may not be correctly handled on vendor edit.
Test plan for this follow-up:
1) insert some tax rates with trailing zeroes in gist
system preference (e.g: '0|0.080|0.12|0.20|0.23')
2) add some vendors, choosing 8.0% 12.0% 20.0% 23.0%
as gst rate
3) try to modify them
4) note that vendors with 12.0% and 23.0% tax rates are
preserving previously choosen rates on edit, while
the ones with 8.0% and 20.0% do not (they are defaulting
to the first defined tax rate)
5) apply the patch
6) repeat 2) and 3)
7) all tax rates configured in system prefrence shall now
behave properly while editing vendors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Wed, 5 Feb 2014 10:16:14 +0000 (11:16 +0100)]
Bug 11680: fix case where tax rate changes unexpectedly on editing an order
If the tax rates in Acquisitions -> gist system preference are entered
with trailing zeroes, given order tax rate value may not be correctly
handled on order edit.
To test:
1) insert some tax rates with trailing zeroes in gist
system preference (e.g: '0|0.080|0.12|0.20|0.23')
2) place some new orders, choosing 8.0% 12.0% 20.0% 23.0%
as gst rate
3) try to modify them
4) note that orders with 12.0% and 23.0% tax rates are
preserving previously choosen rates on edit, while
the ones with 8.0% and 20.0% do not (they are defaulting
to the first defined tax rate)
5) apply the patch
6) repeat 2) and 3)
7) all tax rates configured in system prefrence shall now
behave properly while editing orders
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and that this patch fixes it.
Problem also exists for editing the default tax rate of a vendor.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 4 Apr 2013 10:09:37 +0000 (12:09 +0200)]
Bug 10090: display item type description instead of code on acq ordered and spent pages
On ordered.pl and spent.pl, the itemtype codes are displayed, instead of
descriptions.
Links for the ordernumber should be changed. In ordered.pl, we are
redirected to the receive page. In spent.pl, the links are deleted.
Signed-off-by: Broust <jean-manuel.broust@gmail.com>
Revisited patch: The link to orderreceive was broken, so I undo the
changes.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works alright, itemtype descriptions are shown.
The removed link was potentially 'dangerous' as you shouldn't
get to the receive page for an order, without providing an invoicenumber
first.
Passes all tests and QA script.
Jacek Ablewicz [Mon, 10 Mar 2014 09:53:52 +0000 (10:53 +0100)]
Bug 11914: fix two issues when creating an order from a suggestion
When order is being created from purchase suggestion:
- Budget/fund stored in suggestion record (if any) is not retained
on order page, system always defaults to 'Select a fund' even if some
fund was already chosen for a suggestion on the earlier stage.
- If there was a price given to, and stored within suggestion record,
initial prices calculations on order page are not working properly
('Replacement cost', 'Budgeted cost' and 'Total' show as 0.00 or blank).
As a workaround - to force correct price recalculation - user needs
to manually alter and then re-alter some price-related fields (e.g.,
quantity or vendor price).
This patch fixes both issues.
Test plan:
1) create a suggestion: choose some buget, enter something in 'Price'
and 'Quantity' fields,
2) try to make an order from this suggestion, to confirm/replicate
aforementioned problems,
3) apply patch,
4) make an order from previously created suggestion again, observe
that both issues are now resolved.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Jonathan Druart [Mon, 28 Oct 2013 14:10:26 +0000 (15:10 +0100)]
Bug 11148: remove two superflous routines from Koha::DateUtils
There are 2 useless routines in the Koha::DateUtils
module:output_pref_due and format_sqlduedatetime. We can call
output_pref and format_datetime with dateonly = 0.
format_sqlduedatetime is only used in one place: opac-reserve.pl
Test plan:
1/ Verify on the opac-reserve.pl page that the date is correctly
displayed for for onloan items (you should use the "specific copy"
feature).
2/ Launch prove t/DateUtils.t UT file and verify all UT pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Due date on opac-reserve shown correctly. Unit tests pass.
Did a grep on both function names.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No references to subs found. Passes koha-qa.pl, t and xt
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 18 Dec 2013 13:37:40 +0000 (08:37 -0500)]
Bug 11416: fix case where serials item editor was incorrectly hiding fields
In serials/serials-edit.pl, if an item field is hidden from the OPAC,
it will not display in the editor, even if the field is marked as
visible in the staff intranet and editor. However, the field is still
displayed correctly in the items editor ( additem.pl ).:
Test Plan:
1) Select an item-level field ( e.g. non-public note )
2) Create a serial using the default framework ( or one of your choice )
3) For that framework, mark the chosen field as visible from the
intranet and editor, but not the opac.
4) Receive an item for this serial, note your field does not display
5) Use the biblio item editor to add an item ( additem.pl ), not the
field displayes
6) Apply this patch
7) Repeat step 4, not the field displayes
Signed-off-by: Kim Schwant <kim.schwant@courts.in.gov> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
PrepareItemrecordDisplay is only used for editor (-4 < hidden < 4)
Blou [Wed, 12 Feb 2014 17:03:08 +0000 (12:03 -0500)]
Bug 11752: display the correct frequency for serial subscriptions in OPAC details
This fixes bootstrap and prog by modifying the description displayed
in the OPAC's detail of serials.
RM NOTE: this patch does not cover the case where custom serial
frequencies have been defined.
TESTING to reproduce
- create/find a serial with a 1/week periodicity (4 in the database)
- Find it in the opac-detail.pl, click "more details" at the bottom
- validate the string. Before the patch, it will say:
"The current subscription began on 2013-12-06 and is issued every 3
weeks for 26 issues"
The "every 3 weeks" is clearly wrong.
In fact any periodicity chosen would display a wrong description, not
matching the staff interface.
After the patch, the display is corrected.
As a bonus, the "every 2 years" now has a description, where it had
none before.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 5 Feb 2014 10:05:19 +0000 (11:05 +0100)]
Bug 11689: Take new serial missing statuses into account in more places
Bug 10851 introduced new missing status (codes 41,42,43,44), but in
GetSerials and _update_missinglist, they are not taken into account.
This patch corrects the issue.
To reproduce:
1/ Create a serial with 10 issues.
2/ Set different statuses on each one, with at least 6 missing statuses
(not only "Missing").
3/ Go on the subscription detail page, tab "Summary", the issues with a
new missing status are not listed in the missing issues list.
4/ On the "Issues" tab, all missing are listed (normally only 5 should
be listed.
5/ Apply the patch.
6/ Edit serial (to rewrite the missing list).
6/ Verify that steps 3 and 4 have now correct behavior.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
Julian Maurice [Fri, 28 Mar 2014 13:38:25 +0000 (14:38 +0100)]
Bug 12003: Do not calculate next pubdate for irregular subscriptions
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Bug 12098: (follow-up) put can_show_subscription() into use
This patch puts C4::Serials::can_show_subscription() into use.
Note that there is user-visible change: if a subscription has a
blank library, all users with serials permissions will be able
to view and/or edit it. It remains to be determined whether
we *want* such subscriptions to exist, or if they should only
be tied to specific libraries.
Jonathan Druart [Wed, 16 Apr 2014 14:58:36 +0000 (16:58 +0200)]
Bug 12098: Refactor can_*_subscription in C4::Serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested on top of patches for 12048 and 12080.
Subscription search
- superlibrarian, IndyBranches on/off - always sees all subscriptions
- superserials, IndyBranches on/off - always sees all subscriptions
- no superserials, IndyBranches on - only sees own subscriptions
Note: Subscriptions without branches will only show, when all subscriptions
are visible. In a future enh it might be good to enforce setting a
branch, when IndyBranches is used.
- no superserials, IndyBranches off - always sees all subscriptions
Subscription editing
- superlibrarian, IndyBranches on/off - can edit all subscriptions
- superserials, IndyBranches on/off - can edit all subscriptions
- no superserials, IndyBranches on - can only edit own subscriptons and
subscriptions without branch
NOTE: it would make sense to also allow Edit > Edit as new (duplicate)
here, so one can copy the subscription from another branch to modify
it for the own branch.
Passes tests in t, xt and QA script, also newly provided unit tests.
Bug 12080: restore effect of superserials permission
The superserials permission is meant to allow an operator
to see all subscriptions regardless of branch when IndependentBranches
is on without having to have full superlibrarian permissions. This
patch restores this behavior.
TEST PLAN
---------
1) Apply the patch for bug 12048 (as needed -- it may be pushed)
2) Ensure you have two users: superlibrarian, non-superlibrarian
with all access to the staff client except superserials.
3) Ensure you have serials belonging to a different branch than
the non-superlibrarian.
3) Log into staff client as superlibrarian
4) Click 'Serials'
5) Click the 'Submit' button in the search area.
-- note the number of results.
6) Log into staff client as non-superlibrarian
7) Click 'Serials'
8) Click the 'Submit' button in the search area.
-- note the number should be less, note the number.
9) Give the non-superlibrarian superserials access.
10) Home -> Serials
11) Click the 'Submit' button in the search area.
-- the number will still be the same at the one in step #8.
12) Apply the patch
13) Refresh the page
-- the number should now match the one in step #5.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12048: restore ability of superlibrarian to see other libraries' subscriptions
This patch fixes a regression in master and 3.14. When a user has
superlibrian permissions, a search on serials subscriptions should
display other libraries' subscriptions even when IndependentBranches
syspref is enabled.
To reproduce/test the bug/patch:
1. Enable IndependentBranches (i.e. 'Prevent' staff...)
2. Login as a user not having superlibrarian permission
3. Search for a serial subscription on:
/cgi-bin/koha/serials/serials-search.pl
4. Search a title which has at least 2 subscriptions: one in the user
branch, and one in another branch
5. On the result page, just 1 subscription is displayed: the one
attached to the userbranch
=> this is normal
6. Login as a user having superlibrarian permission
7. Repeat step 3-5.
8. You get the same result as 5. You should have seen all subscriptions.
That's what you get after applying this patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I tested a variation. My superlibrarian was a branch that
was not the same as the non-superlibrarian. The serial was
the same branch as the non-superlibrarian. Without the
patch, the superlibrarian saw nothing, with the patch it
saw the serial as expected.
Also, remember the superserials permission can affect the
results. I successfully changed the branch of the
subscription, and then it ceased to show up with
superserials not granted to the non-superlibrarian.
I corrected the system preference name in the text here.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Superlibrarian permission now allows to see all subscriptions
independent from the branch.
Passes all tests and QA script.
But the superserials permission appears broken to me before
and after this patch. If I have superserials - the search
doesn't show all subscriptions. If I don't have superserials
I can still edit any subscription accessing the subscription
detail page through the serial collection page or accessing
the detail page directly by manipulating the URL.
Jonathan Druart [Wed, 3 Jul 2013 08:52:21 +0000 (10:52 +0200)]
Bug 10533: move JavaScript functions for basket groups to a separate file
This patch moves JavaScript functions used for managing basket groups
to a file. This has the effect of putting the last (active) use of
the YUI JavaScript library by the staff interface in one file:
koha-tmpl/intranet-tmpl/prog/en/js/basketgroup.js
Test plan:
- Try all actions for basketgroup ( drag/drop, add, delete, close, print,
reopen, edit, export as csv).
- Check that there is no regression on others acquisition pages:
* acqui/neworderempty.tt
* acqui/uncertainprice.tt
* acqui/addorderiso2709.tt
* acqui/basketheader.tt
* admin/aqbudgets.tt
* admin/aqcontract.tt
* admin/aqbudgetperiods.tt
* admin/aqplan.tt
* suggestion/suggestion.tt
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Frédérick [Tue, 18 Mar 2014 20:11:44 +0000 (16:11 -0400)]
Bug 11955: Remove spaces in empty indicators when linking an authority to a biblio record.
This patch removes spaces in indicators which are imported when we link an
authority to a biblio record. The spaces made the indicators harder to edit
after the linking, because we had to delete the superfluous space character
before a new value could be entered.
To test:
1. Open some authority on editor, save with empty indicators.
They are saved as ind1=" " ind2=" " on auth_header tables, with spaces
2. Edit some record, link some tag with previous auth,
indicators now have a space on it (or ind1 at last)
3. Apply the patch
4. repeat 2, space is gone
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12071: improve generation of Z39.50 search links
This patch fixes two problems with the generation of
links to execute a Z39.50 search from the staff client
catalog and cataloguing search results page.
First, if using URI::Escape 3.30 or earlier, performing a simple search
with a double quote (e.g., "histoire algerie"), the Javascript is broken
in results page because of :
function GetZ3950Terms(){
var strQuery="&frameworkcode=";
strQuery += "&" + "title" + "=" + ""histoire%20algerie"";
Second, the encoding of non-ASCII characters in the search
term was broken.
This patch moves URI escaping from Perl to template with uri TT filter.
Test plan :
- To reproduce the issue with double quotes, the server
must be running URI::Escape 3.30 or earlier; the current
version of URI::Escape properly escapes double quote.
- In staff interface, perform a search with double quotes
that will return no result, ie "aaa xxx"
=> Without patch, javascript is broken
=> With patch, javascript is not broken
- Click on Z3950 button on results page
=> Without patch, the Title input is empty
=> With patch, the Title input contains the search terms
Additional test:
Do a search with something like äöü and then click Z3950
button on results page.
Without patch, encoding is broken in Z3950 form
With patch, encoding is correct.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a few tabs. Passes tests and QA script.
I can't reproduce the Javascript problem, but I can reproduce
the Z39.50 encoding problem and can detect no regression.
Kyle M Hall [Fri, 15 Nov 2013 16:29:23 +0000 (08:29 -0800)]
Bug 11258: fix another case where holds queue made transfer requests that contradict the library holds policy
This patch fixes a problem where the holds queue generator
was making requests where the pickup library is the
same as the item's library but not the patron's branch,
even if there is a "Default holds policy by item type" rule that states
this item can only fill holds for patrons of the same library as the
item.
Test Plan:
1) Create a test record with 2 items with different itemtypes
2) Set the Default holds policy by item type for the first
item to "From any library"
3) Set the Default holds policy by item type for the second
item to "From home library"
4) Place a record level hold for a patron from another library,
but for pickup at the same library as the item is from
5) Rebuild the holds queue
6) View the holds queue, note the item is listed, though this
patron cannot place a hold on this item
7) Apply this patch
8) Repeat step 5, note the hold is no longer in the queue
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
automated tests pass, functional tests pass. Bug replicated, eradicated by patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I finally managed to reproduce this, patch works as described.
Passes tests and QA script, provided tests fail without patch, but
succeed with the patch.
This patch modifies the patron summary printout so that
only fines with an outstanding balance (either positive
or negative) are displayed. Also, the entire fines section
is displayed only if there is a non-zero balance.
This is consistent with the logic for displaying the loans
and hold requests tables, and avoids cluttering the summary
with historical fines.
Frédérick [Thu, 27 Feb 2014 20:54:01 +0000 (15:54 -0500)]
Bug 11869: Add more informations to the patron account printing page
This patch adds additional informations to the "Print summary"
and the "Print receipt" templates.
Additional information in "Print summary":
* Registration date
* Expiration date
* Library
* Category
* Fines and payments
TEST PLAN
---------
1) Go to a patron.
2) Make sure they have something checked out.
3) Manually add a fine.
4) Under the 'Print' button click 'Print summary'
-- the resulting preview should:
a) have the first for things listed above, and
b) have a new fines and payments section.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The due date of the check out is not part of this patch,
and so I signed off. Similarly, anything required for
slips is configurable elsewhere now and thus comment 1
does not accurately reflect the intent of this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes all tests and the QA script.
Owen Leonard [Wed, 9 Apr 2014 16:15:56 +0000 (12:15 -0400)]
Bug 12058: make OverDrive search results page show cart, lists, and login links
The template for OverDrive search results in the Bootstrap OPAC doesn't
show the cart, lists, or login links because the template's checks of
related system preferences relies on [% USE Koha %], which is not
present. This patch adds it.
To test, enable the bootstrap theme and OverDrive integration
(OverDriveClientKey, etc.). Perform a search in the OPAC and click to
view results from your OverDrive library. Confirm that cart, lists, and
login links appear in the header.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Bug confirmed, and this patch fixes it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9448: (follow-up) prevent unauthorized operator from bypassing check on forgiving overdue fines
This patch adds a step to verify that an operator has the writeoff
permission before allowing them to forgive overdue fines during
checkin, which was possible if the operator manually added an
"exemptfines" URL parameter.
Bug 9448: (follow-up) tweak description of new permissions
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Kyle M Hall [Thu, 21 Mar 2013 11:18:50 +0000 (04:18 -0700)]
Bug 9448: Add separate permission for writing off fees
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12079: ensure that CheckReserves() includes reserve_id in its response
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
projects / koha.git / log