Jonathan Druart [Mon, 12 Nov 2018 21:21:58 +0000 (18:21 -0300)]
Bug 21817: Centralize the mock of userenv from tests
This patch adds a new method mock_userenv from t::lib::Mocks in order to
simplify the mock of the userenv.
Test plan:
prove all the test files modified by this patch
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21547: (follow-up) Rely on Koha::Patron->set_password checks
This patch makes the controller just call $patron->set_password and use
the exceptions it might raise instead of manually checking the passwor
strength.
No behaviour change should be expected. It also removes some leftovers.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 11 Oct 2018 10:00:31 +0000 (12:00 +0200)]
Bug 21547: Use set_password in opac-passwd and remove sub goodkey
Remove sql statement to change password by calling set_password.
Remove sub goodkey by calling C4::Auth::checkpw_hash.
Adding the scalar before param Oldkey (from bug 21036).
Rebased on top of 21178 (using set_password instead of update_password).
Test plan:
Try to change password in OPAC with good and bad pw.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Alex Buckley [Wed, 31 Oct 2018 10:27:41 +0000 (10:27 +0000)]
Bug 21754: Automatically clean up outstanding transfers on lost items
This is an alternative to bug 21732 as transfers are automatically cancelled on marking an item lost, and the items holding rbanch is set to the transfers source ('from') branch.
When an item is marked as lost, the routine should also clean up any
outstanding transfers.
Also added tests to t/db_dependent/Circulation.t which check:
* If transfer is automatically deleted when item is marked as lost
* If the items holdingbranch automatically changes when item with
transfers on it is marked as lost.
Test plan:
1. Find a item which is in transfer, i.e. find an item with the text in
the 'Status' field of the table in detail.pl that indicates it is in
transfer
2. Set the item to 'Lost' either by clicking on Edit->Edit items from
the detail.pl page
OR
clicking on the Items tab on the left side of the detail.pl page
3. Notice that the transfer is now cancelled for the item and the items
holdingbranch is the transfers source ('from') branch
4. Run t/db_dependent/Circulation.t
Sponsored-by: Brimbank Library, Australia Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
(fixed the introduction of a whitespace line and removed a double
declare warning from the new tests as part of QA) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Tue, 16 Oct 2018 14:51:40 +0000 (11:51 -0300)]
Bug 21571: Make ACCTDETAILS translatable
This patch makes the notice "ACCTDETAILS" translatable.
Test plan:
1. Switch on TranslateNotices and AutoEmailOpacUser
2. Define templates for different languages for ACCTDETAILS
3. Create a new patron, define an email address, userid and password.
Also pick a different "preferred language" then the default value
4. You should receive the email with the correct, translated, email.
Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 15 Nov 2018 18:56:00 +0000 (18:56 +0000)]
Bug 21844: Include itemcallnumber in lost fine description
To test:
1 - Make sure WhenLostChargeReplacementFee is set to charge
2 - Find an item with a replacement cost (or default) and a call number
3 - Checkout the item to a patron
4 - Mark the item lost
5 - View the fine - the description includes title and barcode
6 - Apply patch
7 - Check the item in
8 - Check it out again
9 - Mark it lost
10 - Note the fine includes the callnumber
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 26 Oct 2018 16:15:39 +0000 (16:15 +0000)]
Bug 21693: Clean up checkout notes template
This patch modifies the checkout notes template to help compliance with
coding guidelines and interface patterns:
- Convert to Bootstrap grid
- Improve DataTables configuration
- Put buttons into a toolbar and move above selection links
Also corrected: Minor markup error in circ-nav.inc
To test, apply the patch and enable the AllowCheckoutNotes system
preference. Add a few checkout notes via the OPAC.
- Go to Circulation -> Checkout notes.
- Confirm that the page looks correct at various browser widths.
- Confirm that the first and last columns of the table of notes are
not sortable.
- The table should be sorted by default by title.
- Title sorting should ignore articles "a," "an," and "the."
- Test with the CircSidebar preference both on and off.
- With CircSidebar turn on, the checkout notes menu item in the
left hand sidebar should show a count of checkout notes.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Make sure the directory exists and contains multiple files.
- Go to Tools -> Access files
- Confirm that the page looks correct and the layout adjusts at various
browser widths.
- Confirm that DataTables functionality works correctly, including
correct sorting by date.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Wed, 16 Dec 2015 00:25:44 +0000 (01:25 +0100)]
Bug 21789: Example usage of I18N Template::Toolkit plugin
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 16 Nov 2018 08:41:04 +0000 (09:41 +0100)]
Bug 21848: Remove Text::Unaccent from C4::Members
At refactoring time the unac_string call was moved to Koha::Patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 13 Dec 2018 12:07:48 +0000 (13:07 +0100)]
Bug 21848: Resolve unac_string warning from Circulation.t
Just add "use utf8".
Test plan:
Run Circulation.t; verify there are no warnings.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 18 Dec 2018 18:30:28 +0000 (18:30 +0000)]
Bug 22022: Correct ordering for authorised values
To test:
1 - Add a shelving location with code "ZZZZ" and lib "Awake"
2 - Load some items in batch modification
3 - Note shelving location dropdown is wrong
4 - Apply patch
5 - Reload page
6 - Note order is correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Tue, 18 Dec 2018 21:43:05 +0000 (22:43 +0100)]
Bug 22024: Correct new installations with missing data
For a new installation the data in the class_* will be
missing as class_sources.sql couldn't be executed. It will
fail with:
DBD::mysql::st execute failed: Cannot add or update a child row:
a foreign key constraint fails (`koha_kohadev`.`class_sources`,
CONSTRAINT `class_source_ibfk_2` FOREIGN KEY (`class_split_rule`)
REFERENCES `class_split_rules` (`class_split_rule`)) at /usr/share/perl5/DBIx/RunSQL.pm line 273.
As this might have been missed and the web installer can still
be completed, this patch checks for the tables being empty and
adds the default data if they are.
To test:
- Without the patch
- Run the de-DE or another translated installer
- Verify the error is shown
- Complete the installer
- Verify class_sources table is empty
- Apply patches
- Run the database update
- Verify data classification sources, filing rules, and
slitting rules are now complete
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 11 Dec 2018 15:15:57 +0000 (15:15 +0000)]
Bug 21984: Pass param_name in pagination URL
To test:
1 - Create a report like:
SELECT <<cat>>,<<dog>>,<<cat>> FROM items
2 - Run the report, enter 'CATS' and 'DOGS'
3 - Get results LIKE "CAT | DOG | CAT"
4 - Try to go to page 2
5 - FAIL! (last column is blank)
6 - Apply patch
7 - Run the repot, enter 'CATS' and 'DOGS'
8 - Verify first page looks right
9 - Go to page 2
10 - Results are correct!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: “Lucas Gass” <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 14 Dec 2018 15:49:44 +0000 (12:49 -0300)]
Bug 21065: Set ON DELETE SET NULL on accountlines.borrowernumber
Note: Why do we have ON UPDATE SET NULL on accountlines.itemnumber? Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 7 Dec 2018 17:14:06 +0000 (14:14 -0300)]
Bug 14334: Remove AutoCommit from tests
And use a DBIx transaction instead.
Test plan:
prove that the test files modified by this patch are passing
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Andreas Roussos [Fri, 23 Nov 2018 17:30:23 +0000 (19:30 +0200)]
Bug 21880: "Relationship information" disappears when accessing paginated results in authority searches
When linking authorities with authorities, if you perform a
search that returns >20 results, the "Relationship information"
section disappears when you click on the pagination hyperlinks.
This patch fixes that.
Test plan:
1) In the Authorities module, edit an authority (or create a new
one) and try to link it with another authority (via UNIMARC
500$a, for example).
2) When the authority finder comes up, search for something that
will yield more than 20 results, then click on the pagination
links -- notice how the "Relationship information" section is
no longer visible.
3) Apply the patch (and restart Plack/memcached, if necessary).
4) Repeat step 2) -- "Relationship information" is now persistent.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Wed, 12 Dec 2018 14:05:19 +0000 (11:05 -0300)]
Bug 21986: Do not escape quotation marks when cataloguing
In several places we escape quotation marks using
$value =~ s/"/"/g;
All the occurrences are wrong and must be removed.
Most of them are leftover of bug 11638 (Remove HTML from
addbiblio.pl), which removes the construction of html from pl scripts.
The problem has been highlighted by bug 13618, I did not track down why
the issue did not exist before (?)
Test plan:
0/ Use strings with quotation marks, like:
'Fiddle tune history : "bad" tunes'
You can also use other html characters to make the tests more complete,
like 'Fiddle tune history : <"bad" tunes>'
1/ authorities/authorities.pl
a. Edit an authority filling different fields with quotation marks
b. Edit it again
=> The display (inputs' values) is wrong, if you save the escaped quotes
will be inserted
2/ cataloguing/addbiblio.pl
Same editing a bibliographic record
3/ cataloguing/additem.pl
Same editing items
4/ members/memberentry.pl
Edit a patron's record and fill some fields with quotation marks
+ fields borrowernotes and opacnotes
=> The quotes are inserted directly in DB (escape is done before the
insert!)
5/ opac/opac-review.pl
For QA only: $js_ok_review is never used
6/ tools/batchMod.pl
For QA only: $value is always undefined at that point
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 7 Dec 2018 13:26:02 +0000 (10:26 -0300)]
Bug 21973: Do not url escape casServerUrl
It is already escaped correctly in
C4::Auth_with_cas::_url_with_get_params using URI::Escape::uri_escape
Note that shibbolethLoginUrl is not and must be url escaped in template
("be consistent, they said")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Fri, 7 Dec 2018 19:49:00 +0000 (16:49 -0300)]
Bug 21931: Do not reset the ES mapping on 3.23.00.050
This update DB entry uses DBIx schema which does not make it crashes if
the table structure is changed.
Which happens on 18.06.00.054, that added search_field.weight
The entry 3.23.00.050 fails with
Unknown column 'me.weight' in 'field list'
This patch removes the reset of the mapping and display a warning to
tell the administrator the mapping must be reset/inserted
Test plan:
Use a 3.22 dump and upgrade it
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 12 Dec 2018 16:16:50 +0000 (16:16 +0000)]
Bug 21991: Pass param names to report limit tool
To test:
1 - Define a report like:
SELECT barcode, itemnumber
FROM items
WHERE (homebranch = <<Branch|branches>> AND 0 ) OR
<<Branch|branches>>=<<Branch|branches>>
2 - Run it, you get results
3 - Select 'Rows to display' 50
4 - No results
5 - Apply patch
6 - Run report
7 - Change display rows
8 - Results remain!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 6 Dec 2018 13:07:18 +0000 (10:07 -0300)]
Bug 21950: Remove filtering for query_cgi and limit_cgi
We must not escape query_cgi and limit_cgi template-side, they are already
escape properly from build_query_compat using uri_escape_utf8.
To fix further problems we should replace all occurrences to make things
clear (I decided to keep the html filter so far, which did not hurt, but uri or url do)
query_cgi is uri_escaped from the pl, so we should displayed as raw
Test plan:
Use wide characters ❤
Search, filter, facets, search history, rss (both interfaces)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21969: Fix Koha::Account->outstanding_* matching the opposite on pathological cases
This patch makes outstanding_* methods be safe regarding pathological
account lines that get converted into another type because of the value
of amountoutstanding
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> FAIL: Tests fail because pathological account lines are wrongly
picked.
- Apply this patch
- Run:
k$ prove t/db_dependent/Koha/Account.t
=>SUCCESS: All green!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch introduces regression tests for Koha::Account::outstanding_*
methods so they don't pick wrong lines when amountoutstanding matches
what we are looking for (i.e. negative for credits and positive for
debits).
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> FAIL: Tests fail because pathological account lines are wrongly
picked.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Wed, 5 Dec 2018 03:44:25 +0000 (03:44 +0000)]
Bug 21947: Address other misordered FILTER lines
As per comment #3, this patch changes the order for all
the filters found with the recommended git grep.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Mark Tompsett [Tue, 4 Dec 2018 18:58:17 +0000 (18:58 +0000)]
Bug 21947: Swap the filter order
TEST PLAN
----------
1) start your kohadevbox
2) cd kohaclone
3) git checkout -b bug_21947 origin/master
4) git bz apply 21947
5) reset_all
6) log in to staff client and add a 500$a with lots
of blank lines between strings with some HTML.
7) look at the opac record Title notes tab.
-- does it have <br>-mess? Should not.
8) repeat steps 5-7 on master, and you'll see
a <br>-mess.
9) run qa test tools
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21759: Avoid manually setting amountoutstanding in _FixAccountForLostAndReturned
This patch changes the behaviour in the _FixAccountForLostAndFound
method.
The method will now add the amountoutstanding value for the lost item
fee to the CR credit to be generated. This means that:
- If there's some remaining debt, the same amount will be added to the
CR credit and used to cancel that debt. The final amountoutstanding
will be the same as before, but an offset will be generated as
required.
- If the line was written off, the behaviour remains unchanged, so no
offset.
- If the line was payed and/or written off in full only the payments are
refund, preserving the current behaviour.
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests fail because the behaviour is not correct
- Apply this patch
- Run:
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests now pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch tests for a new behaviour in the _FixAccountForLostAndFound
method.
The method will now add the amountoutstanding value for the lost item
fee to the CR credit to be generated. This means that:
- If there's some remaining debt, the same amount will be added to the
CR credit and used to cancel that debt. The final amountoutstanding
will be the same as before, but an offset will be generated as
required.
- If the line was written off, the behaviour remains unchanged, so no
offset.
- If the line was payed and/or written off in full only the payments are
refund, preserving the current behaviour.
Only changes to the 'remaining debt' use cases on this tests are
expected.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests fail because the behaviour is not correct.
Note: some tests order changes are introduced to avoid calling
discard_changes twice
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 2 Oct 2018 19:48:02 +0000 (19:48 +0000)]
Bug 21465: Don't throw duplicate userid error if userid belongs to the matched patron
To test:
1 - Export your patrons
a - Create a report 'SELECT * FROM borrowers'
b - Run and save the report as csv (check your delimiter)
c - Delete the borrowernumebr column
2 - Use the Patron Import tool to import the csv from above
3 - Set matching to 'cardnumber'
4 - Set 'If matching record is already in the borrowers table:' to
Overwrite
5 - Import
6 - None are import because of matchign userid (their own)
7 - Apply patch
8 - Repeat
9 - Patrons are successfully overwritten
10 - prove -v t/db_dependent/Koha/Patrons/Import.t
11 - prove -v t/db_dependent/Koha/Patrons.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Thu, 6 Dec 2018 11:42:12 +0000 (12:42 +0100)]
Bug 21961: Fix typo in manage_didyoumean permission
The typo in the installer files will cause problems on new
installations as the code for the permission is wrong.
This means that on new installations the Did you mean? section
on the administration page won't show up.
In order to fix this, we need to correct the code in
permissions, but also the permissions for users who
this permission has been given to.
To test:
- Start without the patch
- Use a new installation with the permission typo
- Log in as superlibrarian
- Verify that the "did you mean?" configuration page
is not visible
- Create another staff user with permission to access
staff and manage_didyoumean checked
- Verify configuration page remains invisible
- Apply patch and run database update
- Check both users again, the config page should now sohw
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Thu, 29 Nov 2018 09:50:06 +0000 (10:50 +0100)]
Bug 21908: Add DISTINCT biblionumber to rebuild_zebra.pl
Zebra indexing script misc/migration_tools/rebuild_zebra.pl as a table arg to allow filtering.
When using table=items we should use DISTINCT(biblionumber) to avoid indexing several times the same biblio record when it has several items.
This patch adds DISTINCT(biblionumber) in all cases it does not harm if its already unique.
Test plan :
1) Be sur you have a biblio record with biblionumber 1 with 3 items
2) Run misc/migration_tools/rebuild_zebra.pl -v -b --table items --where="biblionumber=1"
3) Without patch you see "Records exported: 3", with patch only one
4) Check indexing works well
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Thu, 29 Nov 2018 09:15:00 +0000 (10:15 +0100)]
Bug 21908: Add biblio_metadata to rebuild_zebra.pl tables
Zebra indexing script misc/migration_tools/rebuild_zebra.pl as a table arg to allow filtering.
It is missing biblio_metadata to allow filtering on MARCXML with ExtractValue.
Test plan :
1) Be sur you have a biblio record with biblionumber 1
2) Run misc/migration_tools/rebuild_zebra.pl -h
3) You see : --table specify a table (can be items, biblioitems, biblio, biblio_metadata) to retrieve biblionumber to index.
4) Run misc/migration_tools/rebuild_zebra.pl -v -b --table biblio_metadata --where="biblio_metadata.biblionumber=1"
5) Check you dont have SQL errors
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Set up 2 items with overdue fines
3) Return one with dropbox mode
4) Note the dropbox account offset is created
5) Return one with full fine forgiveness
6) Note the forgiven account offset is created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Fri, 16 Nov 2018 14:54:39 +0000 (09:54 -0500)]
Bug 21849: Add unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 6 Dec 2018 12:42:45 +0000 (12:42 +0000)]
Bug 21962: Fix authority search using 'all'
To test:
1 - Set search engine to Zebra
2 - Have some authorities and indexes up to date
3 - Search authorities with option 'search entire record'
4 - No results
5 - Apply patch
6 - Run unit tests, they pass!
7 - Repeat search
8 - Results!
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 6 Dec 2018 12:41:41 +0000 (12:41 +0000)]
Bug 21962: Unit tests
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 3 Dec 2018 13:05:49 +0000 (13:05 +0000)]
Bug 21405: Fix authorities pagination for Zebra and ES
Bug 20261 introduced an error because search_auth_compat responded
differently for ES and Zebra, now bug 19365 fixed the underlying
difference. This patch restores previous code to fix pagination.
Additionally we add a fix for 10000+ results in ES and remove a double
import of C4::Auth
To test:
1 - Perform an authorities search with 1+ pages using Zebra
2 - Page through results, note you are only offseeting by 1 each time
3 - Perform an authorities search with 10,000+ results in ES
4 - Click on the last page and get an error
5 - Apply patch
6 - Retry Zebra search
7 - Results should paginate correctly
8 - Clicking on last page should return last results
9 - Retry ES results
10 - Results should paginate correct
11 - Clicking on last page should return last results
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 7 Dec 2018 08:43:58 +0000 (09:43 +0100)]
Bug 21608: (QA follow-up) Rename revert button
The label 'Revert found status' is replaced by 'Revert waiting status'
or 'Revert transit status' depending on hold.found/hold.intransit.
Note that hold comes from reserveloop in request.pl. The columns/keys
found and intransit are just booleans.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 26 Nov 2018 18:19:03 +0000 (18:19 +0000)]
Bug 21608: Add value for 'rank-request' when dropdwn disabled
When a field is disabled no value is submitted in the form - this was
causing found holds to be reverted
To test:
1 - Apply all patches except this one
2 - PLace several holds on one bib
3 - Set at least one waiting or intransit
4 - Making no adjustments hit "Update holds"
5 - Waiting/intransit holds are all reset
6 - Mark them waiting/intransit again
7 - Apply this patch
8 - Click 'update holds'
9 - Found status is not accidentally reverted
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 25 Oct 2018 11:45:25 +0000 (11:45 +0000)]
Bug 21608: Disable dropdown for found holds - add button to revert
This patch disables the dropdown for found holds, and adds a new button
to revert the waiting status, setting the hold to priority 1
Additionally we remove some changes from 19469 and update the JS to skip
found holds when updating priority
To test:
1 - Find a record with multiple items
2 - Place 4 holds (or more)
3 - Capture one ohld as waiting, one as in transit
4 - View the holds on the record - switch the last to priority one
5 - Waiting and transit statuses get confused
6 - Apply patch
7 - Observe dropdown is now disabled for waiting holds
8 - Confirm other holds operate as expected
9 - Confirm 'Revert found status' resets hold
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21608: (follow-up) Use RevertWaitingStatus and do not alter _FixPriority
[EDIT]
Completely removed the changes to Reserves.pm by adding module prefix in
the request.pl script.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Fri, 30 Nov 2018 07:09:23 +0000 (07:09 +0000)]
Bug 21911: Regression test
This tests usuall cases, but note, that administrator could make a
branch with code "%%%" or so, which this test does not cover, and some
functionalities will not work in that case: opac limit override,
holdinbranch facet
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 29 Nov 2018 14:17:37 +0000 (14:17 +0000)]
Bug 21911: Fix OPAC scoping to work with new group system
To test:
0 - Apply patch
1 - Create a library group enabled for opac search limits and add some
libraries
2 - Check the DB (or advanced search dropdown) to get the id of the
group (using 7 as example below)
3 - Add to apache configuration (OPAC virtualhost)
SetEnv OPAC_SEARCH_LIMIT branch:multibranchlimit-7
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT
branch:multibranchlimit-7"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
4 - Ensure OpacAddMastheadLibraryPulldown is disabled
5 - Restart all the things
6 - Visit the opac
7 - Perform a search, confirm it is scoped to the branches in the group
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 29 Nov 2018 14:11:36 +0000 (14:11 +0000)]
Bug 21910: Koha::Library::Groups->get_search_groups should return the groups
To test:
1 - Add a library group (Admin->Library groups)
2 - Enable use as an opac and staff search limit
3 - Add some libraries to the group
4 - Visit advanced search on staff and opac
5 - Note the dropdown has as many empty rows as there are libraries
in the group
6 - Apply patch, restart all the things
7 - Visit staff and opac advanced search
8 - Confirm the group dropdowns are correct
9 - Enable OpacMastheadLibraryPulldown
10 - Ensure the dropdown on opac shows groups correctly
11 - Confirm earchign groups works from all three locations
12 - prove -v t/db_dependent/LibraryGroups.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 7 Nov 2018 01:32:26 +0000 (01:32 +0000)]
Bug 21778: Sort user list by surname,firstname unless user cannot manage patron lists OR edit patrons
To test:
1 - Create four users:
1 superlibrarian (or with both edit patrons and manage patron
lists)
1 with only edit patrons and catalogue
1 with only add to list and catalogue
1 with catalogue but neither edit patrons or manage patron lists
2 - Search patrons signed in as each user
3 - Note different sorting
4 - Apply patch
5 - Try searching with each patron
6 - Results should always be sorted by surname, firstname
7 - Only in the case of neither extra permission should the checkboxes
be absent
Signed-off-by: Devinim <kohadevinim@devinim.com.tr> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Wed, 5 Dec 2018 19:39:02 +0000 (16:39 -0300)]
Bug 21955: Remove Cache::Memory as fallback for L2 cache
If Plack is running with several workers we must not use Cache::Memory
as L2 cache.
If a value is set from a worker, it will not be available from other
workers as the Cache::Memory instance is not shared (of course!)
Moreover we now have Koha::Cache::Memory::Lite that does the same job,
so we should not expect performance regressions by removing it.
See also the email sent to koha-devel for more info
http://lists.koha-community.org/pipermail/koha-devel/2018-December/045004.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch introduces a new button in the 'Pay fines' tab on the
patron's account page. This button, labeled 'Normalize account' is only
displayed when outstanding credits are available, that could be used to
pay up existing debts.
When clicking the button, the Koha::Account::normalize_balance method
(bug 21896) is used for the purpose.
To test:
- Apply this patch (on top of 21896)
- On a patron's 'Fines' tab, create a 'manual invoice' (maybe more than
one)
- Go to the 'Pay fines' tab
=> SUCCESS: No 'Apply credits' button is displayed.
- On the 'create manual credit' tab, create a couple credits.
- Go to the 'Pay fines'
=> SUCCESS: 'Apply credits' button is displayed
- Click on 'Apply credits'
=> SUCCESS: Outstanding credits have been used to pay up debts.
- Play with different options (credit excedes debts and vice-versa, they
match, etc)
=> SUCCESS: They all work as expected
- Sign off :-D
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Thu, 29 Nov 2018 13:49:27 +0000 (13:49 +0000)]
Bug 21896: (QA follow-up) Document and Test for FIFO behaviour
A short dicussion lead to the decision to make it explictly clear that
this method will implicitly apply credits against debits in a 'First In
First Out' manor, meaning oldest outstanding debits will be paid off
first.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the normalize_balance() method to Koha::Account. Its
purpose is to apply outstanding credits (i.e. manual ones ore remaining
amounts like in the case of refunds) to outstanding debts.
To test:
- Apply this patchset
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Account.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 21896: Add unit tests for Koha::Account::normalize_balance
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Pasi Kallinen [Wed, 31 Oct 2018 12:04:33 +0000 (14:04 +0200)]
Bug 21736: Allow translating the localization widget messages
The widget used to translate the item type names to other
languages has few javascript messages that cannot be translated.
Add the mechanism to enable their translation.
Test plan:
1) Install and update a language
2) Check the po-files, there's no msgid for
"A translation already exists for this language."
3) Apply the patch
4) Install and update a language
5) There should be a msgid for the one in 2, and
couple other messages from localization.tt
6) Translate those messages, update the translated templates
7) Go to Administration -> Item types -> Modify item type ->
Translate into other languages
Add a new translation, check that the message given by the widget
was in correct language.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The new plugin hook intranet_catalog_biblio_enhancements_toolbar_button is rendered useless due to the outputted html being escaped using the html filter. It should be using the raw filter instead.
Test Plan:
1) Enable plugins
2) Download and install the latest version of the Kitchen Sink plugin
https://github.com/bywatersolutions/koha-plugin-kitchen-sink/releases/download/v2.1.21/koha-plugin-kitchen-sink-v2.1.21.kpz
3) Browse to catalogue/detail.pl for a record
4) Note you see the raw html of the plugin output in the toolbar
5) Apply this patch
6) Restart all the things
7) Reload the page
8) Note the html is now correctly rendered as a button
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Andreas Roussos [Sat, 17 Nov 2018 18:03:36 +0000 (20:03 +0200)]
Bug 21861: The MARC modification template actions editor does not always validate user input
The MARC modification template actions editor does not validate
user input when adding a conditional clause, making it possible
to save a modification action without filling in all necessary
fields.
This patch fixes that.
Test plan:
1) Create a MARC modification template and add a new action,
e.g. "Copy All field(s) 200$a to field 600$a".
Add a condition ("if" or "unless") but leave the relevant
field and subfield textboxes empty.
Add "matches" or "doesn't match" as a comparison operator.
Check the "RegEx" checkbox, leave the regex textbox empty.
2) Click on "Add action" and notice how it accepts your input.
Also notice the extra space in the Action column RegEx.
3) Edit your modification action and notice the missing "m/"
before the conditional RegEx.
4) Apply the patch and hit CTRL-F5 to reload the relevant JS.
5) Edit the modification action you added previously (or add
a new one). Try leaving the textboxes mentioned above empty
and then submit your changes. You should get pop-up windows
informing you about missing fields.
6) Now try typing a value in the conditional regex textbox and
Update your action. In the Action column, there should be
no spaces between the delimiters of the matching operator
and the value you just entered.
7) Edit your action: notice how the "m/" before the regular
expression and the "/" after it are now showing correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Wed, 28 Nov 2018 09:05:19 +0000 (10:05 +0100)]
Bug 21895: Fix path to POT file
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Tue, 27 Nov 2018 23:51:45 +0000 (00:51 +0100)]
Bug 21895: Fix translation for package install
The string extraction process was not taking into account the fact that
standard/package install have a completely different directory structure
than the dev install
This patch tries to keep the exact same behaviour for dev installs,
while making it work for standard install by using opachtdocs,
intrahtdocs, opacdir and intranetdir from $KOHA_CONF
Test plan:
1. Follow test plan in
https://gitlab.com/koha-community/Koha/commit/d708255c7a4d981c7c7bdd0644a75202ec43b297
2. Do a standard install and repeat step 1 on this new install
3. If you know how to build the Debian package, build it, install it and
verify that koha-translate works as expected
4. prove t/LangInstaller.t
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 29 Nov 2018 16:09:55 +0000 (16:09 +0000)]
Koha 18.12 - ...and Steven!
We are the Koha devs
We’ll always save the day!
And if sometimes we can’t
The community finds a way!
That’s why the people of this world believe in
Users, Librarians, and Devs..
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Tue, 20 Nov 2018 15:45:17 +0000 (16:45 +0100)]
Bug 21867: Replace remaining document.element.onchange calls in marc_modification_templates.js
Replace onchange() by jQuery change().
Test plan:
Go to marc mod templates. Add, edit and delete. Check if works and no js
errors.
git grep -l -E "onchange\(" should not have occurrences outside lib.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Andreas Roussos <arouss1980@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Tue, 20 Nov 2018 10:06:24 +0000 (10:06 +0000)]
Bug 19365: Clean up, fix and add new tests.
Moved db_dependent tests to the proper directory in the hierarchy, fixed tests to check correct results now that the authority query builder works better and added several new tests to cover changed functionality.
Sponsored-by: National Library of Finland Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ere Maijala [Tue, 13 Nov 2018 14:53:30 +0000 (16:53 +0200)]
Bug 19365: Index authority fields as phrases
Followup change to the mappings syntax from bug 19893. Indexing as phrases allows to properly search for matching headings comprised of multiple subfields (e.g. author name with year of birth).
Sponsored-by: National Library of Finland Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ere Maijala [Sun, 16 Sep 2018 21:10:22 +0000 (00:10 +0300)]
Bug 19365: Fix search for duplicate authorities with Elasticsearch
Sponsored-by: National Library of Finland Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ere Maijala [Fri, 14 Sep 2018 03:40:24 +0000 (06:40 +0300)]
Bug 19365: Fix several issues with the Elasticsearch code
Also optimize it so it's actually usable.
Test plan:
1. To test it properly you need biblio and authority data. You might get away with enabling AutoCreateAuthorities and BiblioAddsAuthorities so that authorities are created in the process. Another option would be to import authorities first e.g. from LoC.
2. Make sure the authority index has been properly created with "misc/search_tools/rebuild_elastic_search.pl -a -d"
3. Run "misc/link_bibs_to_authorities.pl -v -l" twice and observe the results.
Sponsored-by: National Library of Finland Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 26 Nov 2018 13:08:05 +0000 (13:08 +0000)]
Bug 21869: Fix incorrect value setting in DB update
To test:
1 - Set some value for MarkLostAsReturned syspref
2 - Set your db version to 17.12.00.035 (or load an older db)
3 - updatedatabase
4 - Note your values are lost and db is incorrectly set
5 - Apply patch
6 - Reset values
7 - Reset DB version
8 - Run updatedatabase
9 - Original values are retained
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 26 Nov 2018 09:30:12 +0000 (10:30 +0100)]
Bug 21878: (follow-up) Fix a few uri filter in facets
We need to adjust a few query_cgi | uri filters here too.
Note that sort_by should be filtered by uri, not url.
Similar change on staff side.
Test plan:
Toggle Show all items/Limit available items.
Check: git grep -l "query_cgi | uri"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Mon, 26 Nov 2018 09:10:37 +0000 (10:10 +0100)]
Bug 21878: (follow-up) Fix a few query_cgi filters in opac-search-history
We need to replace the uri filter on query_cgi to make some URLs work.
Test plan:
Check if the links on user page, search history work for biblio and auth
in current and previous release.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nazlı Çetin [Fri, 23 Nov 2018 14:23:07 +0000 (14:23 +0000)]
Bug 21878: To fix pagination problem in OPAC
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 24 Oct 2018 12:23:02 +0000 (14:23 +0200)]
Bug 21644: better UNIMARC XSLT display of 210 in intranet
In intranet default UNIMARC XSLT display of 210 is tricky.
It tests each subfield with a complex conditional prefix.
In OPAC default UNIMARC XSLT display 210 is simply displayed with a loop on all subfields.
I propose to use the same code as OPAC in intranet.
It allows to display $f and removes strange middle-score character.
Test plan:
1) Doni't apply patch
2) Use an UNIMARC database
3) Use default XSLT in all displays
4) Configure a framework to allow 210 subfields from 'a' to 'h'
5) Edit a record with this framework
6) In each 210 subfield enter its letter : $a a, $b b ...
7) Save record
8) Look at record in OPAC, you see : "Publication: a, b : c, d, e, f : g, h"
9) Look at record in intranet
10) You see : ""Publication: a, b : c, d - e : g, h
11) Apply patch
12) Look at record in intranet
13) You see : "Publication: a, b : c, d, e, f : g, h"
Signed-off-by: Andreas Roussos <arouss1980@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch makes intranet consistent with staff again on this area.
Note that we loose some punctuation like "- e".
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Execute the update DB entry
Confirm that you now have PA_CLASS in the AV category list
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Fri, 23 Nov 2018 11:02:51 +0000 (12:02 +0100)]
Bug 21874: (QA follow-up) Fix intranet sendshelf
Move encode line below regex line.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log