Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mason James [Fri, 14 Jan 2022 07:00:03 +0000 (20:00 +1300)]
Bug 29882: remove unrequired package definitions in list-deps script
to test...
- apply patch, rebuild new package
- install new koha-common pkg successfully
Signed-off-by: Magnus Enger <magnus@libriotech.no>
I did not build packages, just grep'ed the source to check that
these modules are no longer used. Please set back to "Needs
signoff" if this is not considered good enough.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 5 Sep 2022 12:59:57 +0000 (13:59 +0100)]
Bug 31435: (follow-up) Make kohaTable calls consistent
Our calls to instantiate a kohaTable from JS were inconsistent in how
they pass table_settings where no table_settings exist.
This patch replaces empty arrays and empty hashrefs with a consistent
'null' being passed to ake it clear we don't have any settings to pass
yet.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 22 Aug 2022 07:15:34 +0000 (08:15 +0100)]
Bug 31435: Tie 'Configure' to table_settings
This patch adds a check for table_settings to prevent the display of
'Configure this table' when table settings are not passed to the
datatable wrapper.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Suggested test plan:
* Without patch:
* Go to Administration > SMTP servers
* Verify the configure button shows, but doesn't work
* Apply patch
* Reload the SMTP servers page
* The configure button will no longer show
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31364: Check length of the multiple syspref array instead whether it is null
The multiple systempreferences are always defined as an empty array at
the minimum, so in order to determine whether we need to remove all
the selections from the systempreference we should check whether the
array is empty and not whether the array doesn't exist.
To test:
1) Set at least 1 value for OPACHoldsIfAvailableAtPickupExceptions
2) Remove all the values for OPACHoldsIfAvailableAtPickupExceptions
and notice you get the message "Nothing to save"
3) Apply patch and repeat, removing all the values should work now.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Isobel Graham [Thu, 1 Sep 2022 09:44:37 +0000 (10:44 +0100)]
Bug 31488: Update Max checkout text
This changes text from "you have checked out too many items" to
"You have reached the maximum limit of items checked out".
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Isobel Graham [Thu, 1 Sep 2022 10:45:04 +0000 (11:45 +0100)]
Bug 31170: Decapatalized "Overdue Item Fine Description"
I changed "Overdue Item Fine Description" to "Overdue item fine
description" for both the name and title.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30231: (bug 5927 follow-up) See (rejected) forms of series entry visible in search result (OPAC and intra)
When using zebra with IncludeSeeFromInSearches on, with traced series, the rejected
forms (4XX) of series entries are visible in result lists, both in OPAC and intra
interfaces.
Test plan:
=========
1. Have a MARC 21 installation with zebra, and with IncludeSeeFromInSearches on.
Have an authority records for series (130, or 100/110/111 with
title) with rejected forms (4XX fields). So the auth record should
contain at least:
130 _0 $a Series title
430 _0 $a Some other title under which the series in known
Use (each) authority record in at least two biblio records (in appropriate
fields, i.e. 800/810/811/830 or even deprecated 440, if it makes use
of UNIF_TITLE).
Don't forget to properly input also 490 (for 8XX). So the biblio record
shold contain at least:
245 nn $a Work title.
490 1_ $a Series title
830 _0 $a Series entry $9 <koha_id>
Reindex.
2. Perform a simple biblio search (in OPAC and in intra) with the title
from auth record.
3. You shold get a list of results. See the Series information--you
shold see not only the accepted entry from 1XX in auth but also the
rejected forms from 4XX.
4. Apply the patch.
5. Repeat 3. You shold see only the entry form of series now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 12 Aug 2022 16:19:49 +0000 (16:19 +0000)]
Bug 31356: Use hold expiration date instead of adding days to the waiting date
The Talking Tech outbound script currently just adds the
ReservesMaxPickUpDelay to the waiting date to calculate the
"expiration date", but it should use the actual hold expiration
date which may differ from this naive calculation based on
various system preference values.
Test Plan:
1) Create a holiday for tomorrow
2) Set ReservesMaxPickUpDelay to 5
3) Set "Days mode" to "Same week day"
4) Enable ExcludeHolidaysFromMaxPickUpDelay
5) Enable TalkingTechItivaPhoneNotification
6) Create a hold and fill the hold so it is waiting
7) Enable "Hold filled" phone notices for that patron
8) Create a 'phone' version of the HOLD notice
9) Run ./misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl --type RESERVE -w 0
10) Note the output has the expiration date ( 15th colume ) 5 days from now which is *not* the hold's expiration date
11) Apply this patch
12) Repeat the command from step 9
13) Note the expiration date column now matches the holds actual expiration date!
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31177: Fix misplaced import in C4::ILSDI::Services
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the tests less fragile to existing data. It does so by
making sure that when checking if the item would be hidden by
OpacHiddenItems and lost status, the item is not skipped, and thus the
notforloan value, as retrieved from the search engine is picked for the
notforloan_count calculation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 3 Feb 2022 13:14:33 +0000 (13:14 +0000)]
Bug 30016: Remove GetOpenIssue subroutine
This patch adjusts the code that uses GetOpenIssue to use/find a Koha::Checkout object
instead
To test:
1 - Add a course to course reserves
2 - Create an item with barcode TESTKOC
3 - Add the item to a course
4 - Checkout the item
5 - View course details on stff and opac and confirm item shows as checked out and due date displays
6 - prove t/db_dependent/Circulation/issue.t t/db_dependent/Circulation.t t/db_dependent/CourseReserves.t
7 - Browse to Circulation->Upload offline circulation
8 - Upload a file to return the item: https://wiki.koha-community.org/wiki/Koha_offline_circulation_file_format
9 - Confirm item is returned
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 3 Jun 2022 06:16:20 +0000 (08:16 +0200)]
Bug 31315: Remove GetHostItemsInfo and GetItemsInfo from moredetail
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search.
Here we are going to deal with catalogue/moredetail
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:58:36 +0000 (14:58 +0000)]
Bug 30847: Consolidate code to check if patron can place holds and exit if they cannot
This will save us fetching more info if we are denying the holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:44:50 +0000 (14:44 +0000)]
Bug 30847: Don't get biblio/item info when placing holds
The only bit we get form the hash is the rank and title
We can simply fetch the biblio once to calculate
no need to fetch all the info as we don't display or use it
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:34:55 +0000 (14:34 +0000)]
Bug 30847: Don't declare undef variable for assignment
New holds have found set to undef - we can do this directly
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:33:26 +0000 (14:33 +0000)]
Bug 30847: Avoid fetching biblio object
Here the items biblionumber is either equal to the biblionumber passed
in or it is not and should be - we can just assign directly from the
item in all cases
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:19:32 +0000 (14:19 +0000)]
Bug 30847: Don't fetch patron twice
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:02:57 +0000 (14:02 +0000)]
Bug 30847: Remove unused OPACShowHoldQueueDetails
Search for the variables, they aren't used!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 14:00:16 +0000 (14:00 +0000)]
Bug 30847: Remove unused noreserve parameter
This is defined but never used
To test:
1 - git grep noreserve
2 - only one ocurrence
3 - Apply patch
4 - repeat, no ocurrence
5 - Note the plural has a few uses
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 25 May 2022 13:23:26 +0000 (13:23 +0000)]
Bug 30847: Cleanup calculation of holds and rank
Currently we loop over all the holds on the record to get a count of the reserves not
waiting and a rank for the upcoming hold
We can simply count the number of nont waiting holds and add 1
Note: Before this patch the count of holds included the new hold we were going to place
which meant rank and count were the same. I believe countaing existing holds and our
upcoming rank is the correct behavior
To test:
1 - Set OPACShowHoldQueueDetails system preference to 'Show holds and their priorty level'
2 - Place a few holds on a bib on the staff side
3 - Mark 1 waiting
4 - Attempt to place hold on the bib on the opac
5 - Note 'Your priority' and 'Number of holds' are the same number
6 - Place another hold, confirm both increase
7 - Set another hold waiting, confirm both decrease
8 - Apply patch
9 - Confirm 'Your priority' is now 1 greater than Number of holds
10 - Place a hold, set a hold waiting, confirm numbers adjust as appropriate
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Thu, 10 Mar 2022 04:02:49 +0000 (04:02 +0000)]
Bug 30262: Trim whitespace off tracklinks.pl URLs
This patch trims whitespace off tracklinks.pl URLs so that
the URL is in the same format as the URLs returned by
C4::Biblio::GetMarcUrls, which is used by tracklinks.pl internally.
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Add a 856 with $u of 'https://koha-community.org ' (note the space at the end0
3. Save record
4. Change 'TrackClicks' syspref to 'Track'
5. Go to http://localhost:8080/cgi-bin/koha/opac-detail.pl?biblionumber=29
6. Click on the online resource (eg
http://localhost:8080/cgi-bin/koha/tracklinks.pl?uri=https%3A%2F%2Fkoha-community.org%20&biblionumber=29
)
7. Note you are redirected to https://koha-community.org
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Added the link with a space at the end. Verified that without the
patch, clickin on "Click here to access online" gives a 404. After
applying the patch the redirect works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the database update to ensure users with the
'remaining_permissions' subpermission of 'updatecharges' continue to be
able to manually invoice and manually credit borrower accounts after the
patch is applied.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Fri, 15 Jul 2022 16:05:51 +0000 (17:05 +0100)]
Bug 30335: (follow-up) Bind new permissions to pages and tabs
This patch binds the new permissions added in the previous patch to the
tab display on the borrower account page.
Test plan
1) Apply the previous patch and run the database update
2) Configure a user without the new permissions
3) Confirm the 'Create manual invoice' and 'Create manual credit' tabs
no longer appear under the 'Accounting' area when logged in as the
above user.
4) Confirm that you cannot manually navigate to /members/mancredit.pl or
/members/maninvoice.pl when logged in as the above user.
5) Confirm that users with the above permissions are still able to see
the tabs and take actions on them.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Fri, 15 Jul 2022 15:54:03 +0000 (16:54 +0100)]
Bug 30335: (follow-up) Add permissions for manual accounts options
This patch adds two new sub-permissions, `manual_credit` and
`manual_invoice` to allow/prevent staff the ability to add manual
invoices and credits to a patrons account.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Tue, 22 Mar 2022 17:45:40 +0000 (17:45 +0000)]
Bug 30335: Add classes to invoice/credit tabs on patron accouting pages
To test:
1. Apply patch and go to the patron accounting page.
2. Notice the class names for each list element on the page.
3. You can use the following CSS to try hiding each of the tabs:
Signed-off-by: Rachael Laritz <rachael@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31489: Typo in EnableExpiredPasswordReset description
This patch corrects a typo in the EnableExpiredPasswordReset system preference description.
To test:
1) Apply patch
2) Go to Administration > Global system preferences
3) Search for EnableExpiredPasswordReset
4) Read the description and make sure there are no errors.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fridolin Somers [Wed, 17 Aug 2022 06:09:32 +0000 (20:09 -1000)]
Bug 31379: Change results per page text for default
Since Bug 14715, one can change number of results per page.
The actual text in combobox for default value is : "Library default:
20"
This text is hard to translate correctly.
For example french translation use "site par défaut" wrongly meaning
"default library".
I propose to simply use "20 (defaut)".
Test plan :
1) Go to system preferences and set both 'numSearchResultsDropdown' and
'OPACnumSearchResultsDropdown' to 'Show'
2) Do a catalogue search in the intranet using a search term that will
bring lots of results
3) Look at restults per page combobox
4) Same for OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This made the affected test fail consistently on those versions.
This trick for checking OpacHiddenItems is correct (as introduced on bug
28125 doesn't really make use of the warning, just prints it in
about.pl) so one option was to just check for a warning.
I decided to keep the test, but add the optional DECIMAL|DOUBLE check on
the qr. This way other eventual changes will make it fail and serve as a
warning in case something more relevant changes.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ t/db_dependent/Koha/Items.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Mon, 22 Aug 2022 19:02:14 +0000 (19:02 +0000)]
Bug 31112: (follow-up) Don't return "on_reserve" when there are 0 possible holds
It's possible that there could be 0 possible reserves, for example
when the hold has already been filled, thus the check would fail as
the item count can never be less than 0.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Mon, 22 Aug 2022 19:02:03 +0000 (19:02 +0000)]
Bug 31112: (follow-up) Bring back the check for non-priority holds
Before the changes from bug 31112 when CheckReserves returned a
non-priority hold we didn't return "on_reserve" status but checked in
addition to that whether there are any priority holds and if there
were, only then we returned the "on_reserve" error.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 19 Aug 2022 13:23:05 +0000 (13:23 +0000)]
Bug 31112: (QA follow-up) Fetch patrons with reserves
Previously we fetched all in a single call using biblionumbers
Fetching each individually could be a performance hit on systems
with large numbers of holds
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 19 Aug 2022 13:11:09 +0000 (13:11 +0000)]
Bug 31112: (QA follow-up) Restore check to avoid extra processing
We now count all holds for all patrons, we can still eject if we have more
holds than we do items
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31112: CanBookBeRenewed: take into account patrons with more than 1 hold to a biblio
If a single patron had more than 1 hold to a biblio and there was only one
available item we allowed incorrectly renewing the checkout when
AllowRenewalIfOtherItemsAvailable was set to "Allow". This
changes CanBookBeRenewed so that it makes sure all the holds are
filled and not just one per patron.
To test:
1) prove t/db_dependent/Circulation.t
2) (Optional, as unit test is provided)
- Set AllowRenewalIfOtherItemsAvailable = Allow
- Create biblio with three items
- Checkout one item to patron A
- Add two biblio-level holds for patron B
- Try to renew patron A's checkout with and without this patch.
- Notice that without this patch the renewal succeeds even though we
one unfilled hold left. After applying the patch the renewal should
fail.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Please check manually that the logic stays the same, use git's -w command line parameter to
ignore whitespace changes in the diff output.
2) prove t/db_dependent/Circulation.t
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 20262: Add ability to refund lost item fees without creating credits
Some libraries handle refunding of paid lost fees at a financial office and not within Koha. To facilitate this, it would be good for Koha to have the option to not generate lost returned credits by skipping fully paid lost items, and only refunding the outstanding balance on partially paid lost fees.
Test Plan:
1) Apply this patch
2) Set your lost item refund on return policies to 'Only if unpaid'
3) Mark an item lost, charging the lost fee
4) Return the item, a full refund should occur
5) Mark another item lost, charging the lost fee
6) Make a partial payment on this lost fee
7) Return the item
8) The remaining balance of that fee should be 0, but the patron should
not recieve a credit for the already paid balance
8) Mark another item lost, charging the lost fee
9) Fully pay the lost fee
10) Return the item. The paid lost fee should be unaffected.
11) Run tests in t/db_dependent/Circulation.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Thu, 11 Aug 2022 05:26:36 +0000 (05:26 +0000)]
Bug 21366: Add koha-plack --reload to gracefully restart Plack/Starman
This patch adds a "--reload" option to koha-plack, which allows
a sysadmin to gracefully restart Koha.
This is very useful when installing Koha plugins or deploying a hot fix
where you need to change code but don't want to interrupt anyone's
usage of Koha.
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. ps -efww | grep "starman"
4. Now at roughly the same time do the following two actions:
4a. Go to http://localhost:8081/cgi-bin/koha/about.pl
4b. koha-plack --reload kohadev
5. Note that the web request completes successfully
6. ps -efww | grep "starman"
7. Note that the "starman master" process stays alive, but the "starman worker" processes have been restarted
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 19 Apr 2021 15:18:58 +0000 (16:18 +0100)]
Bug 24295: Finally remove GetTransfers from C4/Circulation
This patch handles the final removal of GetTransfers from
C4::Circulation.
Test plan
1/ Check that there is no mention of the GetTransfers method codebase
wide now
2/ Run the circulation and transfers tests and check nothing fails..
perhaps even run the full test suit in k-t-d
3/ Signoff
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 19 Apr 2021 14:59:57 +0000 (15:59 +0100)]
Bug 24295: Remove GetTransfers from C4/Search.pm
This patch removes the final use of GetTransfers from C4::Search.
Test plan
1/ Perform a search that will include results for some items that have
transfers of various states assigned to them
2/ Check the results match expectations (before and after applying the
patch should look the same)
3/ Signoff
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Tue, 16 Mar 2021 10:12:39 +0000 (10:12 +0000)]
Bug 24295: Remove GetTransfers call from C4/HoldsQueue.pm
This patch removes the GetTransfers call from
GetItemsAvailableToFillHoldRequestsForBib instead replacing it with an
inline JOIN in the initial query.
Test plan
1/ Run the holds queue
2/ Check the results
3/ Put one of the items in the holds queue into transit
4/ Run the holds queue again
5/ Check that the results do not contain the item that is in transit
6/ Apply the patch
7/ Run the holds queue again
8/ Check that the results still do not contain the item that is in
transit
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 15 Mar 2021 16:15:22 +0000 (16:15 +0000)]
Bug 24295: Remove GetTransfers from request.pl
This patch replaces the call to GetTransfers in reserve.pl with the
get_transfer method available from the Koha::Item object
Test plan
1/ Place a reserve on an item at a different branch
2/ Trigger the transfer of the item
3/ Check the reserves page for the display of the current transfer
status
4/ Apply patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 15 Mar 2021 16:09:42 +0000 (16:09 +0000)]
Bug 24295: Remove GetTransfers from opac-basket.pl
This patch replaces the call to GetTransfers in opac-basket with the
get_transfer method available from the Koha::Item object
Test plan
1/ Trigger the transfer of the item
2/ Check the opac-basket page for the display of the current transfer
status
3/ Apply patch
4/ Repeat step 2
JK: Remove unneeded string formatting for transfertwhen as it's done
on the template toolkit side already with $KohaDates. Add missing
Koha::Items module import.
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 15 Mar 2021 15:56:20 +0000 (15:56 +0000)]
Bug 24295: Remove GetTransfers from opac-reserve.pl
This patch replaces the call to GetTransfers in opac-reserve with the
get_transfer method available from the Koha::Item object
Test plan
1/ Place a reserve on an item at a different branch
2/ Trigger the transfer of the item
3/ Check the opac-reserves page for the display of the current transfer
status
4/ Apply patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Mon, 15 Mar 2021 15:42:49 +0000 (15:42 +0000)]
Bug 24295: Remove GetTransfer from Z3950Responder
Replace the GetTrasfer call in Z3950Responder/Session.pm with a call to
the Koha::Item method 'get_transfer'.
Test plan
1/ Configure your system to use the Z3950 responder
2/ Trigger an item transfer for an item
3/ Search for the item via Z3950 and varify the transfer status is set
4/ Apply the patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Fri, 24 Jun 2022 01:42:52 +0000 (01:42 +0000)]
Bug 31033: Explicitly define max child processes for SIP server
By default, the SIP server appears to only use 1 child process for
responding to SIP connections.
This change makes this explicit in the configuration, which should
make it so that people who need more than 1 simultaneous SIP connection
can know to just increase the value for the "max_servers" parameter
in the SIPconfig.xml file.
Test plan:
1. Add "max_servers='1'" to your SIP configuration file
2. koha-sip --restart kohadev
3. Open 3 terminals
4. Run "telnet localhost 6001" on 2 terminals
5. On the 3rd terminal, run the following:
ss -l -n -t
ps -efww | grep "sip"
6. Note that there are 2 processes called
kohadev-koha-sip: perl /kohadevbox/koha/C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/SIPconfig.xml
One of these processes is the parent of the other
7. The Recv-Q in the "ss" output should show 1
(This means that 1 of your telnet connections is in the server's TCP backlog)
8. Celebrate as the configuration works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Fri, 6 May 2022 07:21:35 +0000 (08:21 +0100)]
Bug 23681: (follow-up) Mark fields at booleans
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Wed, 4 May 2022 11:36:17 +0000 (12:36 +0100)]
Bug 23681: (QA follow-up) Proper handling of default option
This patch removes the 'can_be_added_manually' flag. Only non-system
restriction types can be added manually, so we exclude is_system instead
of having two flags. (And we set the 'Manual' that's added at install
time to default but not system).
We then add proper handling for setting the default manual restriction
type in the management page and set the dropdown list to use that value
by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Tue, 3 May 2022 15:38:37 +0000 (16:38 +0100)]
Bug 23681: (QA follow-up) Restore customisablity of description
This patch restores the customisability of description for system restriction
types. Translatability is not affected as you can translate the defaults
via template translation and assuming the end users leave their
descriptions at the default, the translations will be picked.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Tue, 3 May 2022 14:30:04 +0000 (15:30 +0100)]
Bug 23681: (QA follow-up) Move preference again
This patch removes the new PatronRestrictionTypes preference from the
accounting area in preference to creating a new group for 'Patron
restriction' related preferences in the circulation preferences tab.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Emmi Takkinen [Tue, 3 May 2022 10:23:43 +0000 (13:23 +0300)]
Bug 23681: DBIC Schema
To be able to delete and pass tests we need to declare
koha_object[s]_class to DebarmentType.pm. Otherwise
following error is raised:
"Can't locate object method "_new_from_dbic" via package
"Koha::DebarmentType" (perhaps you forgot to load "Koha::DebarmentType"?)
at /kohadevbox/koha/Koha/Object.pm line 237"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Emmi Takkinen [Mon, 2 May 2022 12:40:35 +0000 (15:40 +0300)]
Bug 23681: Fix QA issues
This patch fixes following QA issues:
- convert intaller files as .yml
- change column name readonly as is_system
- change column name is_system as default_value
- add column can_be_added_manually (testplan for this below)
- move syspref "PatronRestrictionTypes" to "Accounting > Features" tab
- tweak page title
- tweak tests to apply these changes
Also atomicupdate files have been updated. Issues with delete and tests
is fixed with adding additional schema change file.
To test:
1) Add new restriction type and make it manual.
2) Navigate to patron details page.
3) Add new restriction to patron.
=> Only selectable restriction should be the one
you just created.
Also prove t/db_dependent/RestrictionTypes.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When a patron restriction type is deleted, any debarments that use that
type need to revert to the default type, this patch implements this
behaviour
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 23681: Allow for selection of restriction type
This patch displays a restriction type select box (when appropriate)
when adding manual patron restrictions
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The structure of debarments has changes slightly in that the displayed
text is now a product of a call to Koha::RestrictionTypes rather than
just the debarment's code. This patch allows for that
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds UI to allow CRUD operations on restriction types
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new "modify_patron_restrictions" permission
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the table debarment_types and changes
borrower_debarments.type to be a foreign key to it
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new syspref "PatronRestrictionTypes"
Sponsored-by: Loughborough University Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Wed, 13 Jul 2022 14:31:09 +0000 (14:31 +0000)]
Bug 12225: Use ProcessOfflineIssue
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Tue, 12 Jul 2022 11:46:31 +0000 (07:46 -0400)]
Bug 12225: Re-implement no block flag for checkouts
Test Plan ( assuming Koha Testing Docker or kohadevbox ):
1) Check out master
2) Start the SIP server ( edit the SIP config koha instutution to be
"CPL" instead of "kohalibrary" )
3) Telnet to 6001
4) Send 9300CNkoha|COkoha|CPCPL|
5) Send 11YY20220711 16350220250711 163502AOCPL|AA23529000035676|AB39999000001396|ACkoha|BON|BIN|
6) Note the due date for the checkout in Koha is not in the year 2025:
Henry Acevedo (23529000035676) checked out Philippics. by Cicero, Marcus Tullius. 39999000001396
7) Apply this patch set
8) Restart all the things!
9) Check in the checkout
10) Repeat steps 3 through 5
11) Note the due date is now in 2025!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Mon, 11 Jul 2022 16:57:06 +0000 (16:57 +0000)]
Bug 12225: Fix SIP message templates
If a renewal via SIP would produce an error due to being on reserve, or
exceeding maximum renewals, Koha's SIP2 implementation will refuse to
renew the item even if the "no block" flag is set to Y.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Tue, 23 Aug 2022 20:10:45 +0000 (20:10 +0000)]
Bug 31313: (QA follow-up) Remove unused bundle_host field from item_info
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c07) lead to
koha-tmpl/opac-tmpl/bootstrap/en/includes/item-status.inc
use the bundle_host method directly through the passed
Koha::Item object, thus the bundle_host field added by
this script is unused.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Tue, 23 Aug 2022 19:51:32 +0000 (19:51 +0000)]
Bug 31313: (QA follow-up) Show transfer status correctly if item in transit
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c07) caused the OPAC detail page only show
"Available" status even when the item was in transit.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
projects / koha.git / log