Owen Leonard [Wed, 16 Jul 2014 19:32:08 +0000 (15:32 -0400)]
Bug 4013 [Revised] road type missing on search results
On the patron search results page there are several patron fields which
do not show: street number, road type, and state. This patch adds them.
To test, go to Patrons -> Search patrons and perform a search. In the
table of patron search results each patron record should display the
correct information including street number, road type, and state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
David Cook [Fri, 1 Aug 2014 06:42:34 +0000 (16:42 +1000)]
Bug 12690 - opacuserjs gets loaded twice in self checkout
This patch removes a second instance of "opacuserjs" in the opac
self-checkout.
_TEST PLAN_
1) Enable OPAC Self-checkout in the system preferences
2) Type the following code into your "opacuserjs" system preference:
alert("This is a test");
2) Visit /cgi-bin/koha/sco/sco-main.pl
3) Note that you get a pop-up saying "This is a test" twice.
4) Apply the patch
5) Refresh /cgi-bin/koha/sco/sco-main.pl
6) Note that you now only get a pop-up saying "This is a test" once.
Followed test plan, patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
opac-bottom.inc already adds opacuserjs, so the additional line
in this template can be removed.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12673: Remove CGI::scrolling_list from C4::Items.pm
This patch removes only instance in this file
To test:
1. Apply the patch
2. (Esay way) Put on staff URL
/cgi-bin/koha/services/itemrecorddisplay.pl?biblionumber=N&itemnumber=M
3. Code replaced corresponds to pulldowns, verify information
is correct (check with another item edit view)
PrepareItemrecordDisplay() in Items.pm is filled with chunks of
HTML code that must be put on TT file. For now scrolling_list
is the only removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested different item edit displays and the URL given above,
no regressions found. Also passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
to test:
1. Apply the patch
2. Run the test, prove t/db_dependent/Koha.t
3. Check that it pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12675: Remove CGI::scrolling_list from labeledMARCdetail.pl
This patch removes only instance in this file.
Also updates getframework POD on C4/Koha.pm,
adds new GetFrameworksLoop() func on same file from
suggested code, but with ordered result.
To test:
1. Apply the patch
2. Enable viewLabeledMARC syspref
3. On staff, search for a record, goto detail view
4. Clic on Labeled MARC
5. Framework pulldown was replaced, check changing
framework.
A bug was fixed, because selecting any fw and then Default
tries to load values from 'Default' fw code, which does not
exists.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 28 Jul 2014 15:35:47 +0000 (11:35 -0400)]
Bug 12677: Use Bootstrap "label" style for inline OPAC renewal messages
This patch revises the styling of the renewal success message to use a
default Bootstrap style more suited to inline messages. I think this is
preferable to using the alert style because the alert is designed to be
a block-level element.
Because Koha's CSS already uses a "label" class for something else I
duplicate the Bootstrap "label" class in opac.css as "blabel." The
Bootstrap color definitions are included.
To test, follow the test plan already provided:
1) Apply this patch
2) From the OPAC, renew some items
3) Note the "Renewed!" message in the "Renew" column of the checkouts
table
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12668 - Stray dollar ($) -sign in opac-reserve.pl
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a missing help file for the staff search history page.
To test:
* Turn on EnableSearchHistory
* Do a search in the catalog
* Click your username in the top right and choose 'search history'
* Click 'help' in the top right
* Confirm that help file is there
* note: link to manual won't work until after 2014-08-01 in the USA
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When doing aquisitions and ordering from external z3950 targes, the item price is not inferred from the MARC record when the NORMARC framework is set.
This patch makes GetMarcPrice treat NORMARC the same as MARC21.
Test plan
* Setup Koha with NORMARC framework
* Add a norwegian z3950 search target (ex: z3950.bibsys.no:2100, database=BIBSYS)
* Create a new basket, and add order to basket from external source
* Search for a tile (ex: ISBN 8205341834) from the bibsys z3950 server
* Click to order the title
* Observe that vendor price is not set
* Apply patch, repeat search for same book
* Order, and observe the vendor price is filled in from the MARC record
http://bugs.koha-community.org/show_bug.cgi?id=12554 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No errors.
Tested changing marcflavour syspref to NORMARC,
and following test plan, bug exist and is fixed.
Changed bug description on patch, too long :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch adds a check for NORMARC to provide the same functionality
as for MARC21. No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12687 - Remove CGI::scrolling_list from circulation.pl
This patch removes the only instance in this file
To test:
1. Apply the patch
2. Search for patrons on staff CheckOut,
use a string that gives multiple results
3. Results are displayed on a select,
that was replaced.
4. Check for regressions: select a patron and press 'Select',
or do double click on a patron name, verify you go
to patron's checkout tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Tue, 10 Jun 2014 10:47:37 +0000 (12:47 +0200)]
Bug 12398: Fix CAS authentication validation
CGI::url_param() also returns deleted parameters so we have to check
with CGI::param() too.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Took a while to get it working, but I can confirm CAS login is not
working without this patch, but does with it.
Some notes:
In order for this to work you have to add http:// in front of your
OpacBaseURL.
You will also need a CAS test server and install the certificate
on your system.
Tested with CAS test server provided by Biblibre.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sat, 3 May 2014 09:53:33 +0000 (11:53 +0200)]
Bug 12174 follow-up of the patch (a missing print statement)
http://bugs.koha-community.org/show_bug.cgi?id=12174 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sat, 3 May 2014 09:09:25 +0000 (11:09 +0200)]
Bug 12174 - Zotero connection with Koha: problem with UTF-8
This patch solves the bug for UTF-8 output. MARC-8 works only if you save it as a file. In fact the standard Internet stack (browser, web server, etc.) doesn't know anything about MARC-8 or it's ISO base (ISO 2022).
To test the bug:
-- without the patch use Zotero on a recent Koha install with Apache.
You can use PTFS sandboxes. You can't use Biblibre sandboxes, they use Ngix.
-- Test a record with special chars.
-- Install the patch
-- Catch (using Zotero) the same record.
-- Test all directly download from Opac.
-- To check MARC-8, use a tool that support it. For example MarcEdit.
http://bugs.koha-community.org/show_bug.cgi?id=12174 Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Tested with zotero add-on for firefox.
Before patch bad diacritics, after patch ok
Record exported as MARC-8, transformed using
yaz-iconv -f marc8 -t utf-8 bib.marc8 > bib.utf8
yaz-marcdump -i marc -o line bib.utf8, checking accents,
also comparing with direct utf-8 export
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with Zotero in Firefox and with yaz-iconv as suggested by
Bernardo, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 25 Jul 2014 11:53:40 +0000 (07:53 -0400)]
Bug 12568 [QA Followup] - Use ':' as separator instead of '|'
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 14 Jul 2014 12:34:40 +0000 (08:34 -0400)]
Bug 12568 - Improve visibility of successful renewal via opac
Currently, when a patron renews an item via the opac, the only feedback
the patron receives when a renewal is successful is an updated value for
the due date of the item. This subtle indication of success may go
unnoticed by some patrons. We should add a more prominent way to
indicate an item was renewed successfully.
Test Plan:
1) Apply this patch
2) From the OPAC, renew some items
3) Note the "Renewed!" message in the "Renew" column of the checkouts table
Signed-off-by: Cathi Wiggins <cwiggins@ci.arcadia.ca.us> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Makes successful renewals more visible to the user in the OPAC.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 25 Jul 2014 10:43:08 +0000 (12:43 +0200)]
Bug 12662: (follow-up) Ajax-based check in does not work for some system preference settings enabled
ModItem is needed too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Fri, 25 Jul 2014 08:56:52 +0000 (10:56 +0200)]
Bug 12662: Ajax-based check in does not work for some system preference settings enabled
To reproduce:
- enable "InProcessingToShelvingCart" or "ReturnToShelvingCart"
system preference,
- for a sample patron with 1+ checkouts, try to check in some item[s]
using checkboxes in the "Check in" column in the checkouts table
which is displayed in the "Check out" or "Details" patron account tabs,
- observe that clicking "Renew or return checked items" button only
results in ajax "spinning wheel" stuck in infinite loop; check-in
operation is not performed.
To test:
- follow the steps above to reproduce this bug
- apply patch
- redo the test; ensure that this issue is no longer reproductible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 13:13:34 +0000 (09:13 -0400)]
Bug 7462 - duplicate patron shows flags
When duplicating a patron the form fields for setting patron account
flags and restrictions should be hidden as it is when adding a patron.
This patch adds the correct logic to the template.
To test, duplicate an existing patron:
- Confirm that the "Patron account flags" and "Patron restrictions"
sections are not visible.
- Confirm that saving a duplicated patron works correctly.
- Confirm that the edit and new patron entry forms are unaffected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, all three points confirmed
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small template change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 15 Jul 2014 08:28:14 +0000 (10:28 +0200)]
Bug 10155: Patron search should remember search type options selected
The search type reset to the default.
Test plan:
1/ go on the patrons home page
2/ Launch a search in the header and select the second value for "search
type" ("contains").
3/ Verify the search type is set to "contains" on the results page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 18 Jul 2014 16:22:58 +0000 (12:22 -0400)]
Bug 7237 - duplicating patron not using patron's branch
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Sat, 7 Jun 2014 15:18:13 +0000 (11:18 -0400)]
Bug 11905 - when editing item, cursor is positioning in search box and not to item
cataloging-search.inc had embedded js to set focus into the search box.
This patch removes that js from the cataloging-search.inc and adds it into
addbooks.tt and merge.tt to set focus on those pages and allow focus to be set
to the edit items form on additem.tt
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Juhani Seppälä [Thu, 17 Jul 2014 08:45:06 +0000 (11:45 +0300)]
Bug 11888: Random password suggestion does not work twice
This patch adds a simple ajax-call to pull a new suggested password
from the same perl script.
To test:
1) Search for a patron and select "Change password" from the moremember-view.
2) In the member-password-view, click on "Click to fill with a randomly generated suggestion".
3) Confirm that you get a new suggested password and click the same link again.
4) Note that you do not get another suggested password - nothing is happening.
5) Apply patch.
6) Repeat steps 1-3 and confirm that you can keep clicking for a new suggested password.
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Works as desribed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Thu, 24 Jul 2014 16:12:42 +0000 (17:12 +0100)]
Bug 12654 Correct incorrectly quoted regexp
A compile time warning was being generated because \ does not quote
{ Replace the plethora of \ before meta and presumed meta characters
by \Q \E which gets perl to generate all the necessary escapes, we can
assume it knows its regex engine as well or better than the human
programmer
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified change reading the perldoc and also checked that
./misc/link_bibs_to_authorities.pl is no longer showing
the warn and still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, running:
prove t/db_dependent/AuthoritiesMarc.t
doesn't show the warning anymore.
Bug 12661: Fixing capitalisation from "Item Type" to "Item type"
To fix go to help>reports>manager
Find capitalisation error
"Item Type"
Change to
"Item type"
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 16 Jul 2014 18:21:28 +0000 (14:21 -0400)]
Bug 9221 - contact note not showing
The contents of the contact note field are not displayed on the patron
detail page in the staff client. This patch corrects this.
This patch also corrects the case of the "Contact note" label in the
OPAC patron details form (Log in -> Your personal details).
To test, apply the patch and edit a patron to add data to the contact
note field. Save and view the detail page for that patron. The contents
of the contact note field should appear under the alternate address
data.
In the OPAC the contact note field label should have correct
capitalization.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12615: Remove CGI::scrolling_list from marc_subfields_structure.pl
This patch removes all instances on this file.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > MARC frameworks
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 020
5. Clic 'Edit subfields' button
Now the tests proper
6. On any subfield, check pulldown
'Managed in tab', was replaced, so test
if it works and search for regressions
Change, save, load, change again
7. Clic on 'Advanced constraints'
(2) scrolling list removed
At the bottom, check 'Koha link', was changed
Check assign/remove/save/load values, search for regressions
8. Clic on 'Other options' box
Eight(6) scrolling_list removed, they use to
feed three pulldowns, so check each one
'Authorised value',
'Thesaurus'
'Plugin'
Check assign/remove/save/load values, search for regressions
Check adding a new subfield
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Mon, 30 Jun 2014 12:42:27 +0000 (14:42 +0200)]
Bug 12487: SQLHelper replacement - C4::Contract
With this patch, the subroutines GetContract, GetContracts, AddContract, ModContract and DelContract uses DBIx::Class instead of C4::SQLHelper
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t
3) The command has to be a success :
t/db_dependent/Contract.t .. ok
All tests successful.
Files=1, Tests=43, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.49 cusr 0.05 csys = 1.59 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct, then cancel
17) Click on "Delete this basket"
18) Click on "Contracts" (in the left menu) in order to go on aqcontract.pl, then "Delete" the created contract
19) The contract is not displayed anymore in the vendor page
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Tested on top of Bug 12493
Tests pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Fri, 27 Jun 2014 14:00:50 +0000 (16:00 +0200)]
Bug 12493: moving the subroutines GetContract and GetContracts from C4::Acquisition.pm to C4::Contract.pm
This patch includes:
- the subroutines GetContract and GetContracts has been moved from C4::Acquisition.pm to C4::Contract.pm and adapted for a general use
- adaptation of acqui/basket.pl, acqui/basketheader.pl, acqui/neworderempty.pl, acqui/supplier.pl and admin/aqcontract.pl
- the unit tests for the module C4::Contract.pm
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t t/Acquisition/ t/db_dependent/Acquisition/ t/db_dependent/Acquisition.t
3) The command has to be a success :
t/db_dependent/Contract.t ................................. ok
t/Acquisition/CanUserManageBasket.t ....................... ok
t/Acquisition/Invoice.t ................................... ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Acquisition.t .............................. ok
All tests successful.
Files=10, Tests=284, 15 wallclock secs ( 0.11 usr 0.02 sys + 12.88 cusr 0.77 csys = 13.78 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with both patches applied.
Works as described following test plan, all points (I did 14 first)
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Mon, 23 Jun 2014 14:00:58 +0000 (16:00 +0200)]
Bug 12457: Adding unit tests for Members.pm
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Fri, 20 Jun 2014 12:31:53 +0000 (14:31 +0200)]
Bug 12457: Removal warning in t/db_dependent/Members.t
When I execute prove t/db_dependent/Members.t, this warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
The warning is due to a invalid use of the routine set_userenv
Test plan:
1/ Execute : prove t/db_dependent/Members.t
2/ The warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
3/ Apply the patch
4/ Execute : prove t/db_dependent/Members.t
5/ The result has to be a success without error or warning :
t/db_dependent/Members.t .. ok
All tests successful.
Files=1, Tests=26, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.50 cusr 0.08 csys = 1.63 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All new and old tests pass now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:12:08 +0000 (10:12 -0400)]
Bug 9000 [4] - Update to GPL v3
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:10:08 +0000 (10:10 -0400)]
Bug 9000 [3] - Change conf key from tmpl to template
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:06:28 +0000 (10:06 -0400)]
Bug 9000 [2] - Update included examples
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 28 Jul 2014 14:07:45 +0000 (10:07 -0400)]
Bug 9000 [1] - Update rss.pl to use Template Toolkit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using script with sample conf files
RSS feeds generated are 'well formed' xml
Some koha-qa errors fixed in followup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, even more now than before.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Thu, 19 Jun 2014 14:32:05 +0000 (16:32 +0200)]
Bug 12445: ading unit tests to test the routines : CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion, GetSuggestionByStatus
These routines were not tested
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=89, 1 wallclock secs ( 0.05 usr 0.01 sys + 1.52 cusr 0.08 csys = 1.66 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no koha-qa errors
But now there are 91!
prove t/db_dependent/Suggestions.t
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.00 sys + 1.77 cusr 0.10 csys = 1.92 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yohann Dufour [Thu, 19 Jun 2014 07:14:24 +0000 (09:14 +0200)]
Bug 12445: Improving unit tests for C4::Suggestions.pm
Now, the tests used 'is' instead of 'ok', the tests are wrapped in a transaction, adding tests for the routines NewSuggestion, GetSuggestion, ModSuggestion, GetSuggestionFromBiblionumber and GetInfoFromBiblionumber.
The tests for the routines DelSuggestionsOlderThan, CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion and GetSuggestionByStatus will be arrived in another patch.
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without warning or error :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=32, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.49 cusr 0.08 csys = 1.61 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brian Norris [Fri, 25 Jul 2014 02:16:12 +0000 (14:16 +1200)]
Bug 12562: fix capitalisation of Save Report button
Test:
go to reports and then create report from SQL
the Save button has wrong capitalisaion of Report
add patch
refresh
should see button being Saved report
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Brian, don't forget to assign the bug to yourself and set patch complexity :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Evonne Cheung [Thu, 20 Nov 2014 23:59:48 +0000 (12:59 +1300)]
Bug 12563: capitalisation on detail pages item's tab
Test: go to a record in the catalog, go to detail page, switch to 'items'
tab, look for the 2 'Set status' buttons, check capitalisation should be
lower case for second word.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no koha-qa errors
Evonne, assign the patch to yourself :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Karl Menzies [Fri, 25 Jul 2014 02:27:32 +0000 (14:27 +1200)]
Bug 12564: Fixing capitalisation buttons in inventory tool
To Test
1/ Do a search in the inventory tool - view capitalisation errors in lower Buttons
2/ Apply patch
3/ Redo search in the inventory tool
4/ Confirm capitalisation errors are fixed
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Fixed capitalization (and typo) on patch bug description :)
Karl, don't forget to assign the bug to yourself :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12612: Remove CGI::scrolling_list from auth_tag_structure.pl
This patch removes the only instance in this file.
Don't know if the feature is of some utility, seems
that does not work (no use of auth values as indicators
on MARC authority editor)
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic on MARC structure of any fw
4. Clic Edit on any tag
5. On tag editor check the pulldown 'Authorised value', that was replaced
6. Check for regressions: select a value, save, verify the value, change
again, etc.
Note: removed a SELECT, using now C4::Koha::GetAuthorisedValueCategories
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12613: Remove CGI::scrolling_list from koha2marclinks.pl
This patch removes all (2) instances from koha2marclinks.pl.
Also changes dropdowns width on mapping editor, from an
ugly ragged right to a fixed width view.
To test:
1. Apply the patch
2. Go to Administration > Koha to MARC mapping
3. Pulldown in this view has been replaced, check
for regressions: change table type and press Ok,
verify you get Koha fields and tag/subfield appropriate
for each table.
4. Now press 'Edit' on any field, go into mapping editor
5. Check that all pulldowns show tag/subtags relevant
for each group ( 000s ... 900s )
6. Check that current mapping is displayed correctly
7. Check for regressions: unmap, remap, press Ok,
verify, change again.
8. If you can, check display of mapping editor on several
browsers, just in case.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I have tested with Firefox/Iceweasel only.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested in Chromium.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12614: Remove CGI::scrolling_list from auth_subfields_structure.pl
This patch removes all instances on this file. Even removes some commented out instances.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 031
5. Clic 'Edit subfields' button
Now the tests proper
6. 'Help input' box (editor bottom):
Eight(8) scrolling_list removed, they use to
feed the four pulldowns, so check each one
'Koha field' is new (for me at last)
'Authorised value',
'Thesaurus' (is this valid/useful here?)
'Plugin'
There is a difference between existing subtags and a new subtag,
the 'id' of the pulldowns (so the 8 scrolling list removed)
Check assign/remove/save/load values, search for regressions
If you edit subtag 942, it has a value on kohafield (default fw)
I think that this box could be prettified with fixed width for
pulldowns.
7. No more functional tests, there are 4 scrolling_list removed
that are commented (removed also commented code on tt file),
and two instances that are similar to previously removed
instances, evidently with no effect.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Not sure about the new Koha field entry... All works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All works as expected.
About Koha field: I think it makes sense to have it in the form,
so you can configure the fields for new authority types.
In my database I have mappings on authtypecode and authid.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 22 Jul 2014 10:15:35 +0000 (12:15 +0200)]
Bug 12622: Fix export report as ods
Bug 11679 introduces an ods export for reports.
It looks quite buggy:
1/ You get a Perl error if the report has no results
2/ The ods file contains 1 lines less than the total results.
Test plan:
After applying this patch, try to export a report which has no results
and verify you get an ods file with headers only.
Try to export a report which has a least 1 result and verify the
generated ods has the right number of lines.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the reported problem, passes all tests and QA script.
Added the sign-off line for Robert.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mathieu Saby [Sun, 10 Nov 2013 15:12:31 +0000 (16:12 +0100)]
Bug 11230 - Refactor C4::Stats::UpdateStats and add UT
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sophie Meynieux [Tue, 20 May 2014 15:35:00 +0000 (17:35 +0200)]
Bug 12294 : Cancel replacing carriage return on notices
Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should reserve the use of dirs for namespaces. Method specific tests
should be included in a single file with subtests, or stick to Package_method.t.
This should be discussed, so we rearrange the remaining tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 12:07:33 +0000 (14:07 +0200)]
Bug 12583: DelItem prototype - Add unit tests
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 11:44:39 +0000 (13:44 +0200)]
Bug 12583: DelItem prototype - prefer hashref
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 16 Jul 2014 11:39:07 +0000 (13:39 +0200)]
Bug 12583: DelItem prototype - Remove $dbh
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 14 Jul 2014 13:05:05 +0000 (09:05 -0400)]
Bug 9667 - Inventory scrolling to top with every click
An "onclick" attribute on inventory results links causes the page to
scroll to the top each time. This patch updates the click handling to
use a progressive-enhancement method.
Unrelated changes: I added use of the Branches T:T plugin to output
library name instead of branchcode, and put a check around call number
to prevent output of empty [] in results.
To test, use the inventory tool to check a batch of items. On the
results page:
- Confirm that branch name is shown instead of code.
- Confirm that no [] shows for items without call numbers
- Confirm that clicking a title opens a pop-up window showing details
for that title.
- Confirm that clicking a title opens a pop-up window whether you're on
the first page of results or any subsequent page.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested in Firefox and Chromium.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 23 Jul 2014 17:08:36 +0000 (13:08 -0400)]
Bug 12639 - Z39.50 administration page should use "message" dialog for adds and updates
This patch changes the style of a couple of message boxes to use the
"message" style instead of the "alert" style. This better reflects the
type and priority of the messages being displayed.
To test, got to Administration -> Z39.50 client targets and edit an
existing server. The confirmation message should be the blue "message"
type.
Test again by adding a new server. The confirmation message for this
operation should be of the same blue "message" type.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, tested ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 14 Jul 2014 14:32:11 +0000 (10:32 -0400)]
Bug 12572 - Use jQueryUI Accordion to display message transport types
The notice edit view has separate sections for each of the various
message transport types. This patch groups them in a jQueryUI accordion
to simplify the view.
Also changed: Some label/id pairs have been changed to eliminate
duplicate ids.
To test, apply the patch an edit any notice under Tools -> Notices &
Slips.
- The message transport type fields for email, feed, phone, etc. should
be correctly grouped in a collapsed accordion. The acccordion should
look correct and work correctly.
- Clicking the label for any form field should correctly highlight the
corresponding field.
- Submitting updates to the notice should work correctly for all message
transport types.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described.
Something small: the top border of the uncollapsed/opened section
doesn't display correctly, but this is working a lot nicer than before,
as now changing a message requires a lot less scrolling.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 17 Jul 2014 14:57:06 +0000 (10:57 -0400)]
Bug 12596 - Backdating returns with SpecifiyReturnDate causes fines for items not overdue!
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 17 Jul 2014 16:17:48 +0000 (12:17 -0400)]
Bug 12596 - Unit Test
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12164: (followup) keys expects a hash parameter
As of http://perldoc.perl.org/functions/keys.html we should avoid passing
a scalar parameter as it is not backwards compatible with squeezze's Perl
version (5.10).
Cite:
"Starting with Perl 5.14, keys can take a scalar EXPR, which must contain a
reference to an unblessed hash or array. The argument will be dereferenced
automatically. This aspect of keys is considered highly experimental. The
exact behaviour may change in a future version of Perl."
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 30 Jun 2014 10:05:46 +0000 (12:05 +0200)]
Bug 12164: Fix decimal number display
If the funds are not moved, the amount is display like 123.000000.
This patch hardcodes the number of decimal numbers to display (2).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, especially all acquisition tests.
New routines in Budgets.pm:
- CloneBudgetPeriod
- CloneBudgetHierarchy
- MoveOrders
OK t/db_dependent/Budgets.t
Some of the tests done:
1) Duplicate an existing budget
- OK Existing budget is active, duplicate it and mark it inactive
- OK Existing budget is inactive, duplicate and mark it inactive
2) Close budget
- OK Budget was created without funds - no changes are made
- OK Budget was created with funds, all orders moved correctly
- moving the available money to the new budget is optional
- OK Budget was created with funds, but one fund deleted,
all orders moved correctly, one missing fund reported,
orders unchanged
3) Partial receiced undone
- OK Partial receive from last budget is undone, order lines
are correctly recombined and fund is set to the current budget
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 6 Jun 2014 10:53:53 +0000 (12:53 +0200)]
Bug 12164: follow-up: various fixes
This follow-up fixes issues raised on bug 12164 comment 17.
1/ The unreceived orders columns should only display "pending" orders
2/ Fix some typo from_budget_period_id vs budget_period_id vs
to_budget_period_id
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 2 May 2014 08:00:11 +0000 (10:00 +0200)]
Bug 12164: Add UI report
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 2 Jun 2014 08:19:58 +0000 (10:19 +0200)]
Bug 12164: On closing budget period, move unspent amount
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 2 Jun 2014 08:18:04 +0000 (10:18 +0200)]
Bug 12164: Close a budget period (budget)
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 2 Jun 2014 08:16:13 +0000 (10:16 +0200)]
Bug 12164: On cloning budget periods, add a "reset all funds" option
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 2 Jun 2014 08:14:52 +0000 (10:14 +0200)]
Bug 12164: On cloning budget period, mark original budget as inactive
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 2 Jun 2014 08:10:53 +0000 (10:10 +0200)]
Bug 12164: Move the budget period clone logic into C4::Budgets
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 2 Jul 2014 16:50:54 +0000 (12:50 -0400)]
Bug 12519 - Convert OPAC list download pop-up to modal dialog
This patch changes the OPAC list download process so that the download
link triggers a modal dialog instead of a pop-up window. This
streamlines the process a little bit and makes it work better on mobile
devices.
The download list page has been altered so that it works better as a
standalone page, as it might be seen if JavaScript is disabled. Simple
form validation has been added to help prevent submission of the form
without choosing a format.
To test the virtualshelves system preference must be enabled.
- View an existing list in the OPAC and click the "download list" link.
- A modal dialog should be displayed with the download form.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute.
- Choosing a download format and submitting the form should close
the dialog and trigger the correct download.
- Clicking the "Cancel" link should close the dialog.
Test with JavaScript disabled:
- Clicking the "download list" link should take you to a page which
contains the same form which appeared in the modal dialog.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute..
- Choosing a download format and submitting the form should result in
the corect download.
- Clicking the "Cancel" link should return you to the correct list.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, works as described.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Jonathan Druart [Thu, 17 Jul 2014 11:26:46 +0000 (13:26 +0200)]
Bug 12595: Search a patron by his/her firstname and surname
Before bug 9811, if you searched for "John Doe" and only 1 patron with
this firstname/surname existed, the patron detail page was displayed.
Now the result lists all patrons with ( firstname=john or doe ) or (
surname=john or doe). Which is quite annoying when you expect only 1
result.
Test plan:
0/ Create some patrons like: "John Doe", "Jane Doe", "John Smith".
1/ Search for "John Doe" in the patron search box
2/ Verify you got 2 results
3/ Apply the patch
4/ Search for "John Doe" in the patron search box
5/ Verify you are redirected to the right patron detail page.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Mon, 14 Jul 2014 18:29:20 +0000 (14:29 -0400)]
Bug 12542: Tabs inconsistency in different circ-menu.inc uses
Differences between circ-menu.tt and circ-menu.inc always crop up when a
new menu item is added--usually only to circ-menu.inc as happened with
Bug 9261.
Other sidebar differences are present due to differences in the patron
data passed by various patron-related script to their templates. This
patch also irons out some of these inconsistencies.
To test, apply the patch and check out to a patron whose record has more
than just basic data: othername, country, patron attributes, street
number, road types, etc. View the following pages and compare the patron
data and visible tabs to confirm that they match:
The only difference I've found which is not fixed by this patch is the
display of extended patron attributes in the sidebar of moremember.pl.
This is a piecemeal fix for a problem which really deserves a
centralized solution, but at least it gets us back to consistency for
the moment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Going through all tabs shows consistency is back. A mid term solution should
implement this in a centralized way. Great job Owen!
No koha-qa errors btw.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12559: Wrong message if all cover images deleted
If a record contains a (one or more) local cover image and it is deleted, a wrong message is presented in the UI.
To reproduce:
- Have LocalCoverImages set to "Display" and AllowMultipleCovers set to "Allow".
- Go to the detail page of a record that has no images attached.
- The 'Images' tab conveniently shows the following message:
"No images have been uploaded..."
- Use the "upload" link to add a local cover to the record
- Complete the process, and "view final record".
- The 'Images' tab shows the added cover.
- Delete the cover image using the link below the cover.
=> FAIL: 'Click on an image...' message still shows instead of 'No images have been...'
To test:
- Apply the patch
- Repeat the previous steps
=> SUCCESS : 'No images have been...'
Bonus points: previous code didn't show a message at all if the user didn't have
permissions to upload local cover images. I've split the message in two:
- 'No images have been...' (for everyone)
- 'Please upload (link)...' (for those with the right permissions :-D
Regards
To+
Edit: I used JavaScript to inject the 'No images...' message to aid localization.
It can be improved once we fix some stuff in the translation scripts to better support
placeholders/variables in the templates.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12593: search facets die with regex error if biblio has square brackets in fields
It's quite common to have [something] within facet data, and it produces following error:
Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE
This problem was intoduced in Bug 12151 but is trivial to fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch.
To test:
- Created a bibliographic record, linked to an authority record (personal name). Did a search that returned the author as a facet.
- Added a [ symbol to the author name.
- Repeated the search
=> FAIL: "Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE"
- Apply the patch
- Retry the search
=> SUCCESS: No error, bracket shows correctly.
Passes koha-qa.pl too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12592 - Minor correction for C4::DelBiblio documentation
The function header says that DelBiblio checks to make sure there aren't
any issues on any of the items. What the code does, on the other hand,
is to check whether biblio has any items attached, and refuses to
delete biblio if it has any.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 17 Jul 2014 08:50:30 +0000 (10:50 +0200)]
Bug 11349: (qa follow-up) Fix pod
FAIL cataloguing/value_builder/unimarc_field_125.pl
FAIL pod
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_125.pl
*** ERROR: Spurious text after =cut in file cataloguing/value_builder/unimarc_field_125.pl
FAIL cataloguing/value_builder/unimarc_field_126b.pl
FAIL pod
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_126b.pl
*** ERROR: Spurious text after =cut in file cataloguing/value_builder/unimarc_field_126b.pl
FAIL cataloguing/value_builder/unimarc_field_225a.pl
FAIL pod
*** ERROR: =over on line 40 without closing =back (at head1) in file cataloguing/value_builder/unimarc_field_225a.pl
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_225a.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just adjusts several POD stuff, and in a few cases
reorganizes a hash definition in order to use spaces instead of tabs
for the QA script to be happy.
Nothing important, really. This patch series just changes '.tmpl' for
'.tt'.
Regards
To+
PS beware that running the koha-qa.pl script can take lots of time on this one
:-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since all scripts use the '.tt' sufix for template names
there's no need for and regexp that changes from '.tmpl'
to '.tt'.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log